file can be found.
In some rare cases, you may want to have different versions of these files
-for different architectures or OSes. If files named debian/package.foo.arch
-or debian/package.foo.os exist, where "arch" and "os" are the same as the
+for different architectures or OSes. If files named debian/package.foo.ARCH
+or debian/package.foo.OS exist, where "ARCH" and "OS" are the same as the
output of "dpkg-architecture -qDEB_HOST_ARCH" /
"dpkg-architecture -qDEB_HOST_ARCH_OS",
then they will be used in preference to other, more general files.
-debhelper (7.2.11) UNRELEASED; urgency=low
+debhelper (7.2.11) unstable; urgency=low
* dh: Support --with addon,addon,...
Closes: #528178
file support. Closes: #494914
(Thanks, Aurelien Jarno)
- -- Joey Hess <joeyh@debian.org> Mon, 11 May 2009 14:50:33 -0400
+ -- Joey Hess <joeyh@debian.org> Tue, 12 May 2009 14:52:18 -0400
debhelper (7.2.10) unstable; urgency=low
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2009-04-20 16:15-0300\n"
+"POT-Creation-Date: 2009-05-12 14:52-0300\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
#: debhelper.pod:64
msgid ""
"In some rare cases, you may want to have different versions of these files "
-"for different architectures. If files named debian/package.foo.arch exist, "
-"where \"arch\" is the same as the output of \"dpkg-architecture "
-"-qDEB_HOST_ARCH\", then they will be used in preference to other, more "
+"for different architectures or OSes. If files named debian/package.foo.ARCH "
+"or debian/package.foo.OS exist, where \"ARCH\" and \"OS\" are the same as "
+"the output of \"dpkg-architecture -qDEB_HOST_ARCH\" / \"dpkg-architecture "
+"-qDEB_HOST_ARCH_OS\", then they will be used in preference to other, more "
"general files."
msgstr ""
#. type: textblock
-#: debhelper.pod:70
+#: debhelper.pod:71
msgid ""
"In many cases, these config files are used to specify various types of "
"files. Documentation or example files to install, files to move, and so on. "
msgstr ""
#. type: textblock
-#: debhelper.pod:75
+#: debhelper.pod:76
msgid ""
"You can also put comments in these files; lines beginning with \"#\" are "
"ignored."
msgstr ""
#. type: =head1
-#: debhelper.pod:78
+#: debhelper.pod:79
msgid "SHARED DEBHELPER OPTIONS"
msgstr ""
#. type: textblock
-#: debhelper.pod:80
+#: debhelper.pod:81
msgid "The following command line options are supported by all debhelper programs."
msgstr ""
#. type: =item
-#: debhelper.pod:84
+#: debhelper.pod:85
msgid "B<-v>, B<--verbose>"
msgstr ""
#. type: textblock
-#: debhelper.pod:86
+#: debhelper.pod:87
msgid "Verbose mode: show all commands that modify the package build directory."
msgstr ""
#. type: =item
-#: debhelper.pod:88
+#: debhelper.pod:89
msgid "B<--no-act>"
msgstr ""
#. type: textblock
-#: debhelper.pod:90
+#: debhelper.pod:91
msgid ""
"Do not really do anything. If used with -v, the result is that the command "
"will output what it would have done."
msgstr ""
#. type: =item
-#: debhelper.pod:93
+#: debhelper.pod:94
msgid "B<-a>, B<--arch>"
msgstr ""
#. type: textblock
-#: debhelper.pod:95
+#: debhelper.pod:96
msgid "Act on all architecture dependent packages."
msgstr ""
#. type: =item
-#: debhelper.pod:97
+#: debhelper.pod:98
msgid "B<-i>, B<--indep>"
msgstr ""
#. type: textblock
-#: debhelper.pod:99
+#: debhelper.pod:100
msgid "Act on all architecture independent packages."
msgstr ""
#. type: =item
-#: debhelper.pod:101
+#: debhelper.pod:102
msgid "B<->I<ppackage>, B<--package=>I<package>"
msgstr ""
#. type: textblock
-#: debhelper.pod:103
+#: debhelper.pod:104
msgid ""
"Act on the package named \"package\". This option may be specified multiple "
"times to make debhelper operate on a given set of packages."
msgstr ""
#. type: =item
-#: debhelper.pod:106
+#: debhelper.pod:107
msgid "B<-s>, B<--same-arch>"
msgstr ""
#. type: textblock
-#: debhelper.pod:108
+#: debhelper.pod:109
msgid ""
"This is a smarter version of the -a flag, that is used in some rare "
"circumstances. It understands that if the control file lists \"Architecture: "
msgstr ""
#. type: =item
-#: debhelper.pod:116
+#: debhelper.pod:117
msgid "B<-N>I<package>, B<--no-package=>I<package>"
msgstr ""
#. type: textblock
-#: debhelper.pod:118
+#: debhelper.pod:119
msgid ""
"Do not act on the specified package even if an -a, -i, or -p option lists "
"the package as one that should be acted on."
msgstr ""
#. type: =item
-#: debhelper.pod:121
+#: debhelper.pod:122
msgid "B<--remaining-packages>"
msgstr ""
#. type: textblock
-#: debhelper.pod:123
+#: debhelper.pod:124
msgid ""
"Do not act on the packages which have already been acted on by this "
"debhelper command earlier (i.e. if the command is present in the package "
msgstr ""
#. type: =item
-#: debhelper.pod:129
+#: debhelper.pod:130
msgid "B<--ignore=>I<file>"
msgstr ""
#. type: textblock
-#: debhelper.pod:131
+#: debhelper.pod:132
msgid ""
"Ignore the specified file. This can be used if debian/ contains a debhelper "
"config file that a debhelper command should not act on. Note that "
msgstr ""
#. type: textblock
-#: debhelper.pod:136
+#: debhelper.pod:137
msgid ""
"For example, if upstream ships a debian/init that you don't want "
"dh_installinit to install, use --ignore=debian/init"
msgstr ""
#. type: =item
-#: debhelper.pod:139
+#: debhelper.pod:140
msgid "B<-P>I<tmpdir>, B<--tmpdir=>I<tmpdir>"
msgstr ""
#. type: textblock
-#: debhelper.pod:141
+#: debhelper.pod:142
msgid "Use \"tmpdir\" for package build directory. The default is debian/<package>"
msgstr ""
#. type: =item
-#: debhelper.pod:143
+#: debhelper.pod:144
msgid "B<--mainpackage=>I<package>"
msgstr ""
#. type: textblock
-#: debhelper.pod:145
+#: debhelper.pod:146
msgid ""
"This little-used option changes the package which debhelper considers the "
"\"main package\", that is, the first one listed in debian/control, and the "
msgstr ""
#. type: =head1
-#: debhelper.pod:152
+#: debhelper.pod:153
msgid "COMMON DEBHELPER OPTIONS"
msgstr ""
#. type: textblock
-#: debhelper.pod:154
+#: debhelper.pod:155
msgid ""
"The following command line options are supported by some debhelper "
"programs. See the man page of each program for a complete explanation of "
msgstr ""
#. type: =item
-#: debhelper.pod:160
+#: debhelper.pod:161
msgid "B<-n>"
msgstr ""
#. type: textblock
-#: debhelper.pod:162
+#: debhelper.pod:163
msgid "Do not modify postinst/postrm/etc scripts."
msgstr ""
#. type: =item
-#: debhelper.pod:164 dh_compress:42 dh_makeshlibs:66 dh_md5sums:37 dh_shlibdeps:36 dh_strip:39
+#: debhelper.pod:165 dh_compress:42 dh_makeshlibs:66 dh_md5sums:37 dh_shlibdeps:36 dh_strip:39
msgid "B<-X>I<item>, B<--exclude=>I<item>"
msgstr ""
#. type: textblock
-#: debhelper.pod:166
+#: debhelper.pod:167
msgid ""
"Exclude an item from processing. This option may be used multiple times, to "
"exclude more than one thing."
msgstr ""
#. type: =item
-#: debhelper.pod:169 dh_compress:50 dh_installdirs:32 dh_installdocs:53 dh_installexamples:33 dh_installinfo:41 dh_installman:62 dh_link:52
+#: debhelper.pod:170 dh_compress:50 dh_installdirs:32 dh_installdocs:53 dh_installexamples:33 dh_installinfo:41 dh_installman:62 dh_link:52
msgid "B<-A>, B<--all>"
msgstr ""
#. type: textblock
-#: debhelper.pod:171
+#: debhelper.pod:172
msgid ""
"Makes files or other items that are specified on the command line take "
"effect in ALL packages acted on, not just the first."
msgstr ""
#. type: =head1
-#: debhelper.pod:176 dh_installcatalogs:52 dh_installdocs:81 dh_installemacsen:54 dh_installexamples:50 dh_installinfo:57 dh_installinit:110 dh_installman:79 dh_installmime:41 dh_installmodules:60 dh_installwm:53 dh_installxfonts:37 dh_movefiles:58 dh_scrollkeeper:42 dh_strip:68 dh_usrlocal:49
+#: debhelper.pod:177 dh_installcatalogs:52 dh_installdocs:81 dh_installemacsen:54 dh_installexamples:50 dh_installinfo:57 dh_installinit:110 dh_installman:79 dh_installmime:41 dh_installmodules:60 dh_installwm:53 dh_installxfonts:37 dh_movefiles:58 dh_scrollkeeper:42 dh_strip:68 dh_usrlocal:49
msgid "NOTES"
msgstr ""
#. type: =head2
-#: debhelper.pod:178
+#: debhelper.pod:179
msgid "Multiple binary package support"
msgstr ""
#. type: textblock
-#: debhelper.pod:180
+#: debhelper.pod:181
msgid ""
"If your source package generates more than one binary package, debhelper "
"programs will default to acting on all binary packages when run. If your "
msgstr ""
#. type: textblock
-#: debhelper.pod:188
+#: debhelper.pod:189
msgid ""
"To facilitate this, as well as give you more control over which packages are "
"acted on by debhelper programs, all debhelper programs accept the B<-a>, "
msgstr ""
#. type: =head2
-#: debhelper.pod:194
+#: debhelper.pod:195
msgid "Automatic generation of debian install scripts"
msgstr ""
#. type: textblock
-#: debhelper.pod:196
+#: debhelper.pod:197
msgid ""
"Some debhelper commands will automatically generate parts of debian "
"maintainer scripts. If you want these automatically generated things "
msgstr ""
#. type: textblock
-#: debhelper.pod:203
+#: debhelper.pod:204
msgid ""
"If a script does not exist at all and debhelper needs to add something to "
"it, then debhelper will create the complete script."
msgstr ""
#. type: textblock
-#: debhelper.pod:206
+#: debhelper.pod:207
msgid ""
"All debhelper commands that automatically generate code in this way let it "
"be disabled by the -n parameter (see above)."
msgstr ""
#. type: textblock
-#: debhelper.pod:209
+#: debhelper.pod:210
msgid ""
"Note that the inserted code will be shell code, so you cannot directly use "
"it in a perl script. If you would like to embed it into a perl script, here "
msgstr ""
#. type: verbatim
-#: debhelper.pod:214
+#: debhelper.pod:215
#, no-wrap
msgid ""
" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
msgstr ""
#. type: =head2
-#: debhelper.pod:220
+#: debhelper.pod:221
msgid "Automatic generation of miscellaneous dependencies."
msgstr ""
#. type: textblock
-#: debhelper.pod:222
+#: debhelper.pod:223
msgid ""
"Some debhelper commands may make the generated package need to depend on "
"some other packages. For example, if you use L<dh_installdebconf(1)>, your "
msgstr ""
#. type: textblock
-#: debhelper.pod:230
+#: debhelper.pod:231
msgid ""
"All commands of this type, besides documenting what dependencies may be "
"needed on their man pages, will automatically generate a substvar called "
msgstr ""
#. type: textblock
-#: debhelper.pod:235
+#: debhelper.pod:236
msgid ""
"This is entirely independent of the standard ${shlibs:Depends} generated by "
"L<dh_makeshlibs(1)>, and the ${perl:Depends} generated by L<dh_perl(1)>. "
msgstr ""
#. type: =head2
-#: debhelper.pod:240
+#: debhelper.pod:241
msgid "Package build directories"
msgstr ""
#. type: textblock
-#: debhelper.pod:242
+#: debhelper.pod:243
msgid ""
"By default, all debhelper programs assume that the temporary directory used "
"for assembling the tree of files in a package is debian/<package>."
msgstr ""
#. type: textblock
-#: debhelper.pod:245
+#: debhelper.pod:246
msgid ""
"Sometimes, you might want to use some other temporary directory. This is "
"supported by the -P flag. For example, \"dh_installdocs -Pdebian/tmp\", will "
msgstr ""
#. type: =head2
-#: debhelper.pod:253
+#: debhelper.pod:254
msgid "Debhelper compatibility levels"
msgstr ""
#. type: textblock
-#: debhelper.pod:255
+#: debhelper.pod:256
msgid ""
"From time to time, major non-backwards-compatible changes need to be made to "
"debhelper, to keep it clean and well-designed as needs change and its author "
msgstr ""
#. type: textblock
-#: debhelper.pod:262
+#: debhelper.pod:263
msgid ""
"Tell debhelper what compatibility level to use by writing a number to "
"debian/compat. For example, to turn on V7 mode:"
msgstr ""
#. type: verbatim
-#: debhelper.pod:265
+#: debhelper.pod:266
#, no-wrap
msgid ""
" % echo 7 > debian/compat\n"
msgstr ""
#. type: textblock
-#: debhelper.pod:267
+#: debhelper.pod:268
msgid ""
"Unless otherwise indicated, all debhelper documentation assumes that you are "
"using the most recent compatibility level, and in most cases does not "
msgstr ""
#. type: textblock
-#: debhelper.pod:274
+#: debhelper.pod:275
msgid "These are the available compatibility levels:"
msgstr ""
#. type: =item
-#: debhelper.pod:278
+#: debhelper.pod:279
msgid "V1"
msgstr ""
#. type: textblock
-#: debhelper.pod:280
+#: debhelper.pod:281
msgid ""
"This is the original debhelper compatibility level, and so it is the default "
"one. In this mode, debhelper will use debian/tmp as the package tree "
msgstr ""
#. type: textblock
-#: debhelper.pod:285 debhelper.pod:292 debhelper.pod:315 debhelper.pod:344
+#: debhelper.pod:286 debhelper.pod:293 debhelper.pod:316 debhelper.pod:345
msgid "This mode is deprecated."
msgstr ""
#. type: =item
-#: debhelper.pod:287
+#: debhelper.pod:288
msgid "V2"
msgstr ""
#. type: textblock
-#: debhelper.pod:289
+#: debhelper.pod:290
msgid ""
"In this mode, debhelper will consistently use debian/<package> as the "
"package tree directory for every package that is built."
msgstr ""
#. type: =item
-#: debhelper.pod:294
+#: debhelper.pod:295
msgid "V3"
msgstr ""
#. type: textblock
-#: debhelper.pod:296
+#: debhelper.pod:297
msgid "This mode works like V2, with the following additions:"
msgstr ""
#. type: =item
-#: debhelper.pod:300 debhelper.pod:305 debhelper.pod:309 debhelper.pod:323 debhelper.pod:328 debhelper.pod:333 debhelper.pod:338 debhelper.pod:352 debhelper.pod:356 debhelper.pod:361 debhelper.pod:365 debhelper.pod:377 debhelper.pod:382 debhelper.pod:388 debhelper.pod:394 debhelper.pod:409 debhelper.pod:416 debhelper.pod:420 debhelper.pod:424
+#: debhelper.pod:301 debhelper.pod:306 debhelper.pod:310 debhelper.pod:324 debhelper.pod:329 debhelper.pod:334 debhelper.pod:339 debhelper.pod:353 debhelper.pod:357 debhelper.pod:362 debhelper.pod:366 debhelper.pod:378 debhelper.pod:383 debhelper.pod:389 debhelper.pod:395 debhelper.pod:410 debhelper.pod:417 debhelper.pod:421 debhelper.pod:425
msgid "-"
msgstr ""
#. type: textblock
-#: debhelper.pod:302
+#: debhelper.pod:303
msgid ""
"Debhelper config files support globbing via * and ?, when appropriate. To "
"turn this off and use those characters raw, just prefix with a backslash."
msgstr ""
#. type: textblock
-#: debhelper.pod:307
+#: debhelper.pod:308
msgid "dh_makeshlibs makes the postinst and postrm scripts call ldconfig."
msgstr ""
#. type: textblock
-#: debhelper.pod:311
+#: debhelper.pod:312
msgid "Every file in etc/ is automatically flagged as a conffile by dh_installdeb."
msgstr ""
#. type: =item
-#: debhelper.pod:317
+#: debhelper.pod:318
msgid "V4"
msgstr ""
#. type: textblock
-#: debhelper.pod:319
+#: debhelper.pod:320
msgid "Changes from V3 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:325
+#: debhelper.pod:326
msgid ""
"dh_makeshlibs -V will not include the debian part of the version number in "
"the generated dependency line in the shlibs file."
msgstr ""
#. type: textblock
-#: debhelper.pod:330
+#: debhelper.pod:331
msgid ""
"You are encouraged to put the new ${misc:Depends} into debian/control to "
"supplement the ${shlibs:Depends} field."
msgstr ""
#. type: textblock
-#: debhelper.pod:335
+#: debhelper.pod:336
msgid ""
"dh_fixperms will make all files in bin/ directories and in etc/init.d "
"executable."
msgstr ""
#. type: textblock
-#: debhelper.pod:340
+#: debhelper.pod:341
msgid "dh_link will correct existing links to conform with policy."
msgstr ""
#. type: =item
-#: debhelper.pod:346
+#: debhelper.pod:347
msgid "V5"
msgstr ""
#. type: textblock
-#: debhelper.pod:348
+#: debhelper.pod:349
msgid "Changes from V4 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:354
+#: debhelper.pod:355
msgid "Comments are ignored in debhelper config files."
msgstr ""
#. type: textblock
-#: debhelper.pod:358
+#: debhelper.pod:359
msgid ""
"dh_strip --dbg-package now specifies the name of a package to put debugging "
"symbols in, not the packages to take the symbols from."
msgstr ""
#. type: textblock
-#: debhelper.pod:363
+#: debhelper.pod:364
msgid "dh_installdocs skips installing empty files."
msgstr ""
#. type: textblock
-#: debhelper.pod:367
+#: debhelper.pod:368
msgid "dh_install errors out if wildcards expand to nothing."
msgstr ""
#. type: =item
-#: debhelper.pod:371
+#: debhelper.pod:372
msgid "V6"
msgstr ""
#. type: textblock
-#: debhelper.pod:373
+#: debhelper.pod:374
msgid "Changes from V5 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:379
+#: debhelper.pod:380
msgid ""
"Commands that generate maintainer script fragments will order the fragments "
"in reverse order for the prerm and postrm scripts."
msgstr ""
#. type: textblock
-#: debhelper.pod:384
+#: debhelper.pod:385
msgid ""
"dh_installwm will install a slave manpage link for x-window-manager.1.gz, if "
"it sees the man page in usr/share/man/man1 in the package build directory."
msgstr ""
#. type: textblock
-#: debhelper.pod:390
+#: debhelper.pod:391
msgid ""
"dh_builddeb did not previously delete everything matching DH_ALWAYS_EXCLUDE, "
"if it was set to a list of things to exclude, such as \"CVS:.svn:.git\". Now "
msgstr ""
#. type: textblock
-#: debhelper.pod:396
+#: debhelper.pod:397
msgid ""
"dh_installman allows overwriting existing man pages in the package build "
"directory. In previous compatibility levels it silently refuses to do this."
msgstr ""
#. type: =item
-#: debhelper.pod:401
+#: debhelper.pod:402
msgid "V7"
msgstr ""
#. type: textblock
-#: debhelper.pod:403
+#: debhelper.pod:404
msgid "This is the recommended mode of operation."
msgstr ""
#. type: textblock
-#: debhelper.pod:405
+#: debhelper.pod:406
msgid "Changes from V6 are:"
msgstr ""
#. type: textblock
-#: debhelper.pod:411
+#: debhelper.pod:412
msgid ""
"dh_install, will fall back to looking for files in debian/tmp if it doesn't "
"find them in the current directory (or wherever you tell it look using "
msgstr ""
#. type: textblock
-#: debhelper.pod:418
+#: debhelper.pod:419
msgid "dh_clean will read debian/clean and delete files listed there."
msgstr ""
#. type: textblock
-#: debhelper.pod:422
+#: debhelper.pod:423
msgid "dh_clean will delete toplevel *-stamp files."
msgstr ""
#. type: textblock
-#: debhelper.pod:426
+#: debhelper.pod:427
msgid ""
"dh_installchangelogs will guess at what file is the upstream changelog if "
"none is specified."
msgstr ""
#. type: =head2
-#: debhelper.pod:433
+#: debhelper.pod:434
msgid "Doc directory symlinks"
msgstr ""
#. type: textblock
-#: debhelper.pod:435
+#: debhelper.pod:436
msgid ""
"Sometimes it is useful to make a package not contain a "
"/usr/share/doc/package directory at all, instead placing just a dangling "
msgstr ""
#. type: =head2
-#: debhelper.pod:444
+#: debhelper.pod:445
msgid "udebs"
msgstr ""
#. type: textblock
-#: debhelper.pod:446
+#: debhelper.pod:447
msgid ""
"Debhelper includes support for udebs. To create a udeb with debhelper, add "
"\"XC-Package-Type: udeb\" to the package's stanza in debian/control, and "
msgstr ""
#. type: =head2
-#: debhelper.pod:453
+#: debhelper.pod:454
msgid "Other notes"
msgstr ""
#. type: textblock
-#: debhelper.pod:455
+#: debhelper.pod:456
msgid ""
"In general, if any debhelper program needs a directory to exist under "
"debian/, it will create it. I haven't bothered to document this in all the "
msgstr ""
#. type: textblock
-#: debhelper.pod:461
+#: debhelper.pod:462
msgid ""
"Once your package uses debhelper to build, be sure to add debhelper to your "
"Build-Depends line in debian/control. You should build-depend on a version "
msgstr ""
#. type: verbatim
-#: debhelper.pod:467
+#: debhelper.pod:468
#, no-wrap
msgid ""
" Build-Depends: debhelper (>= 7)\n"
msgstr ""
#. type: =head1
-#: debhelper.pod:469
+#: debhelper.pod:470
msgid "ENVIRONMENT"
msgstr ""
#. type: =item
-#: debhelper.pod:473
+#: debhelper.pod:474
msgid "DH_VERBOSE"
msgstr ""
#. type: textblock
-#: debhelper.pod:475
+#: debhelper.pod:476
msgid ""
"Set to 1 to enable verbose mode. Debhelper will output every command it runs "
"that modifies files on the build system."
msgstr ""
#. type: =item
-#: debhelper.pod:478
+#: debhelper.pod:479
msgid "DH_COMPAT"
msgstr ""
#. type: textblock
-#: debhelper.pod:480
+#: debhelper.pod:481
msgid ""
"Temporarily specifies what compatibility level debhelper should run at, "
"overriding any value in debian/compat."
msgstr ""
#. type: =item
-#: debhelper.pod:483
+#: debhelper.pod:484
msgid "DH_NO_ACT"
msgstr ""
#. type: textblock
-#: debhelper.pod:485
+#: debhelper.pod:486
msgid "Set to 1 to enable no-act mode."
msgstr ""
#. type: =item
-#: debhelper.pod:487
+#: debhelper.pod:488
msgid "DH_OPTIONS"
msgstr ""
#. type: textblock
-#: debhelper.pod:489
+#: debhelper.pod:490
msgid ""
"Anything in this variable will be prepended to the command line arguments of "
"all debhelper commands. Command-specific options will be ignored by commands "
msgstr ""
#. type: textblock
-#: debhelper.pod:493
+#: debhelper.pod:494
msgid ""
"This is useful in some situations, for example, if you need to pass -p to "
"all debhelper commands that will be run. One good way to set DH_OPTIONS is "
msgstr ""
#. type: =item
-#: debhelper.pod:498
+#: debhelper.pod:499
msgid "DH_ALWAYS_EXCLUDE"
msgstr ""
#. type: textblock
-#: debhelper.pod:500
+#: debhelper.pod:501
msgid ""
"If set, this adds the value the variable is set to to the -X options of all "
"commands that support the -X option. Moreover, dh_builddeb will rm -rf "
msgstr ""
#. type: textblock
-#: debhelper.pod:504
+#: debhelper.pod:505
msgid ""
"This can be useful if you are doing a build from a CVS source tree, in which "
"case setting DH_ALWAYS_EXCLUDE=CVS will prevent any CVS directories from "
msgstr ""
#. type: textblock
-#: debhelper.pod:511
+#: debhelper.pod:512
msgid ""
"Multiple things to exclude can be separated with colons, as in "
"DH_ALWAYS_EXCLUDE=CVS:.svn"
msgstr ""
#. type: =head1
-#: debhelper.pod:516 dh_builddeb:87 dh_clean:130 dh_compress:190 dh_desktop:27 dh_fixperms:110 dh_gconf:106 dh_gencontrol:79 dh_installcatalogs:109 dh_installchangelogs:147 dh_installcron:61 dh_installdebconf:118 dh_installdeb:94 dh_installdirs:83 dh_installdocs:223 dh_installemacsen:111 dh_installexamples:103 dh_installinfo:103 dh_installinit:224 dh_installlogcheck:51 dh_installlogrotate:50 dh_installmanpages:197 dh_installman:251 dh_installmenu:80 dh_installmime:85 dh_installmodules:124 dh_installpam:52 dh_install:272 dh_installppp:56 dh_installwm:107 dh_installxfonts:86 dh_link:223 dh_listpackages:29 dh_makeshlibs:227 dh_md5sums:89 dh_movefiles:162 dh_perl:152 dh_python:282 dh_scrollkeeper:76 dh_shlibdeps:163 dh_strip:226 dh_suidregister:117 dh_testdir:44 dh_testroot:27 dh_testversion:75 dh_undocumented:28 dh_usrlocal:114
+#: debhelper.pod:517 dh_builddeb:87 dh_clean:130 dh_compress:190 dh_desktop:27 dh_fixperms:122 dh_gconf:106 dh_gencontrol:79 dh_installcatalogs:109 dh_installchangelogs:147 dh_installcron:61 dh_installdebconf:118 dh_installdeb:94 dh_installdirs:83 dh_installdocs:223 dh_installemacsen:111 dh_installexamples:103 dh_installinfo:103 dh_installinit:224 dh_installlogcheck:51 dh_installlogrotate:50 dh_installmanpages:197 dh_installman:251 dh_installmenu:80 dh_installmime:85 dh_installmodules:124 dh_installpam:52 dh_install:272 dh_installppp:56 dh_installwm:107 dh_installxfonts:86 dh_link:223 dh_listpackages:29 dh_makeshlibs:227 dh_md5sums:89 dh_movefiles:162 dh_perl:152 dh_python:282 dh_scrollkeeper:76 dh_shlibdeps:163 dh_strip:226 dh_suidregister:117 dh_testdir:44 dh_testroot:27 dh_testversion:75 dh_undocumented:28 dh_usrlocal:114
msgid "SEE ALSO"
msgstr ""
#. type: =item
-#: debhelper.pod:520
+#: debhelper.pod:521
msgid "F</usr/share/doc/debhelper/examples/>"
msgstr ""
#. type: textblock
-#: debhelper.pod:522
+#: debhelper.pod:523
msgid "A set of example debian/rules files that use debhelper."
msgstr ""
#. type: =item
-#: debhelper.pod:524
+#: debhelper.pod:525
msgid "L<http://kitenet.net/~joey/code/debhelper/>"
msgstr ""
#. type: textblock
-#: debhelper.pod:526
+#: debhelper.pod:527
msgid "Debhelper web site."
msgstr ""
#. type: =head1
-#: debhelper.pod:530 dh_builddeb:93 dh_clean:136 dh_compress:196 dh_desktop:33 dh_fixperms:116 dh_gconf:112 dh_gencontrol:85 dh_installcatalogs:115 dh_installchangelogs:153 dh_installcron:67 dh_installdebconf:124 dh_installdeb:100 dh_installdirs:89 dh_installdocs:229 dh_installemacsen:117 dh_installexamples:109 dh_installinfo:109 dh_installinit:230 dh_installlogcheck:57 dh_installlogrotate:56 dh_installmanpages:203 dh_installman:257 dh_installmenu:88 dh_installmime:91 dh_installmodules:130 dh_installpam:58 dh_install:278 dh_installppp:62 dh_installwm:113 dh_installxfonts:92 dh_link:229 dh_listpackages:35 dh_makeshlibs:233 dh_md5sums:95 dh_movefiles:168 dh_perl:158 dh_python:288 dh_scrollkeeper:82 dh_shlibdeps:169 dh_strip:232 dh_suidregister:123 dh_testdir:50 dh_testroot:33 dh_testversion:81 dh_undocumented:34 dh_usrlocal:120
+#: debhelper.pod:531 dh_builddeb:93 dh_clean:136 dh_compress:196 dh_desktop:33 dh_fixperms:128 dh_gconf:112 dh_gencontrol:85 dh_installcatalogs:115 dh_installchangelogs:153 dh_installcron:67 dh_installdebconf:124 dh_installdeb:100 dh_installdirs:89 dh_installdocs:229 dh_installemacsen:117 dh_installexamples:109 dh_installinfo:109 dh_installinit:230 dh_installlogcheck:57 dh_installlogrotate:56 dh_installmanpages:203 dh_installman:257 dh_installmenu:88 dh_installmime:91 dh_installmodules:130 dh_installpam:58 dh_install:278 dh_installppp:62 dh_installwm:113 dh_installxfonts:92 dh_link:229 dh_listpackages:35 dh_makeshlibs:233 dh_md5sums:95 dh_movefiles:168 dh_perl:158 dh_python:288 dh_scrollkeeper:82 dh_shlibdeps:169 dh_strip:232 dh_suidregister:123 dh_testdir:50 dh_testroot:33 dh_testversion:81 dh_undocumented:34 dh_usrlocal:120
msgid "AUTHOR"
msgstr ""
#. type: textblock
-#: debhelper.pod:532 dh_builddeb:95 dh_clean:138 dh_compress:198 dh_fixperms:118 dh_gencontrol:87 dh_installchangelogs:155 dh_installcron:69 dh_installdebconf:126 dh_installdeb:102 dh_installdirs:91 dh_installdocs:231 dh_installemacsen:119 dh_installexamples:111 dh_installinfo:111 dh_installinit:232 dh_installlogrotate:58 dh_installmanpages:205 dh_installman:259 dh_installmenu:90 dh_installmime:93 dh_installmodules:132 dh_installpam:60 dh_install:280 dh_installppp:64 dh_installwm:115 dh_installxfonts:94 dh_link:231 dh_listpackages:37 dh_makeshlibs:235 dh_md5sums:97 dh_movefiles:170 dh_shlibdeps:171 dh_strip:234 dh_suidregister:125 dh_testdir:52 dh_testroot:35 dh_testversion:83 dh_undocumented:36
+#: debhelper.pod:533 dh_builddeb:95 dh_clean:138 dh_compress:198 dh_fixperms:130 dh_gencontrol:87 dh_installchangelogs:155 dh_installcron:69 dh_installdebconf:126 dh_installdeb:102 dh_installdirs:91 dh_installdocs:231 dh_installemacsen:119 dh_installexamples:111 dh_installinfo:111 dh_installinit:232 dh_installlogrotate:58 dh_installmanpages:205 dh_installman:259 dh_installmenu:90 dh_installmime:93 dh_installmodules:132 dh_installpam:60 dh_install:280 dh_installppp:64 dh_installwm:115 dh_installxfonts:94 dh_link:231 dh_listpackages:37 dh_makeshlibs:235 dh_md5sums:97 dh_movefiles:170 dh_shlibdeps:171 dh_strip:234 dh_suidregister:125 dh_testdir:52 dh_testroot:35 dh_testversion:83 dh_undocumented:36
msgid "Joey Hess <joeyh@debian.org>"
msgstr ""
msgstr ""
#. type: textblock
-#: dh_builddeb:89 dh_clean:132 dh_compress:192 dh_fixperms:112 dh_gconf:108 dh_gencontrol:81 dh_installcatalogs:111 dh_installchangelogs:149 dh_installcron:63 dh_installdebconf:120 dh_installdeb:96 dh_installdirs:85 dh_installdocs:225 dh_installemacsen:113 dh_installexamples:105 dh_installinfo:105 dh_installinit:226 dh_installlogcheck:53 dh_installlogrotate:52 dh_installmanpages:199 dh_installman:253 dh_installmime:87 dh_installmodules:126 dh_installpam:54 dh_install:274 dh_installppp:58 dh_installwm:109 dh_installxfonts:88 dh_link:225 dh_listpackages:31 dh_makeshlibs:229 dh_md5sums:91 dh_movefiles:164 dh_perl:154 dh_python:284 dh_strip:228 dh_suidregister:119 dh_testdir:46 dh_testroot:29 dh_testversion:77 dh_undocumented:30 dh_usrlocal:116
+#: dh_builddeb:89 dh_clean:132 dh_compress:192 dh_fixperms:124 dh_gconf:108 dh_gencontrol:81 dh_installcatalogs:111 dh_installchangelogs:149 dh_installcron:63 dh_installdebconf:120 dh_installdeb:96 dh_installdirs:85 dh_installdocs:225 dh_installemacsen:113 dh_installexamples:105 dh_installinfo:105 dh_installinit:226 dh_installlogcheck:53 dh_installlogrotate:52 dh_installmanpages:199 dh_installman:253 dh_installmime:87 dh_installmodules:126 dh_installpam:54 dh_install:274 dh_installppp:58 dh_installwm:109 dh_installxfonts:88 dh_link:225 dh_listpackages:31 dh_makeshlibs:229 dh_md5sums:91 dh_movefiles:164 dh_perl:154 dh_python:284 dh_strip:228 dh_suidregister:119 dh_testdir:46 dh_testroot:29 dh_testversion:77 dh_undocumented:30 dh_usrlocal:116
msgid "L<debhelper(7)>"
msgstr ""
#. type: textblock
-#: dh_builddeb:91 dh_clean:134 dh_compress:194 dh_desktop:31 dh_fixperms:114 dh_gconf:110 dh_gencontrol:83 dh_installchangelogs:151 dh_installcron:65 dh_installdebconf:122 dh_installdeb:98 dh_installdirs:87 dh_installdocs:227 dh_installemacsen:115 dh_installexamples:107 dh_installinfo:107 dh_installinit:228 dh_installlogrotate:54 dh_installmanpages:201 dh_installman:255 dh_installmenu:86 dh_installmime:89 dh_installmodules:128 dh_installpam:56 dh_install:276 dh_installppp:60 dh_installwm:111 dh_installxfonts:90 dh_link:227 dh_listpackages:33 dh_makeshlibs:231 dh_md5sums:93 dh_movefiles:166 dh_perl:156 dh_python:286 dh_scrollkeeper:80 dh_shlibdeps:167 dh_strip:230 dh_suidregister:121 dh_testdir:48 dh_testroot:31 dh_testversion:79 dh_undocumented:32 dh_usrlocal:118
+#: dh_builddeb:91 dh_clean:134 dh_compress:194 dh_desktop:31 dh_fixperms:126 dh_gconf:110 dh_gencontrol:83 dh_installchangelogs:151 dh_installcron:65 dh_installdebconf:122 dh_installdeb:98 dh_installdirs:87 dh_installdocs:227 dh_installemacsen:115 dh_installexamples:107 dh_installinfo:107 dh_installinit:228 dh_installlogrotate:54 dh_installmanpages:201 dh_installman:255 dh_installmenu:86 dh_installmime:89 dh_installmodules:128 dh_installpam:56 dh_install:276 dh_installppp:60 dh_installwm:111 dh_installxfonts:90 dh_link:227 dh_listpackages:33 dh_makeshlibs:231 dh_md5sums:93 dh_movefiles:166 dh_perl:156 dh_python:286 dh_scrollkeeper:80 dh_shlibdeps:167 dh_strip:230 dh_suidregister:121 dh_testdir:48 dh_testroot:31 dh_testversion:79 dh_undocumented:32 dh_usrlocal:118
msgid "This program is a part of debhelper."
msgstr ""
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2009-04-20 16:15-0300\n"
+"POT-Creation-Date: 2009-05-12 14:52-0300\n"
"PO-Revision-Date: 2005-09-18 00:11+0200\n"
"Last-Translator: Rubén Porras Campo <debian-l10n-spanish@lists.debian.org>\n"
"Language-Team: SPANISH <debian-l10n-spanish@lists.debian.org>\n"
#, fuzzy
msgid ""
"In some rare cases, you may want to have different versions of these files "
-"for different architectures. If files named debian/package.foo.arch exist, "
-"where \"arch\" is the same as the output of \"dpkg-architecture -"
-"qDEB_HOST_ARCH\", then they will be used in preference to other, more "
+"for different architectures or OSes. If files named debian/package.foo.ARCH "
+"or debian/package.foo.OS exist, where \"ARCH\" and \"OS\" are the same as "
+"the output of \"dpkg-architecture -qDEB_HOST_ARCH\" / \"dpkg-architecture -"
+"qDEB_HOST_ARCH_OS\", then they will be used in preference to other, more "
"general files."
msgstr ""
"En algunos casos raros, puede querer tener diferentes versiones de los "
# type: textblock
#. type: textblock
-#: debhelper.pod:70
+#: debhelper.pod:71
msgid ""
"In many cases, these config files are used to specify various types of "
"files. Documentation or example files to install, files to move, and so on. "
# type: textblock
#. type: textblock
-#: debhelper.pod:75
+#: debhelper.pod:76
msgid ""
"You can also put comments in these files; lines beginning with \"#\" are "
"ignored."
# type: =head1
#. type: =head1
-#: debhelper.pod:78
+#: debhelper.pod:79
msgid "SHARED DEBHELPER OPTIONS"
msgstr "OPCIONES COMPARTIDAS DE DEBHELPER"
# type: textblock
#. type: textblock
-#: debhelper.pod:80
+#: debhelper.pod:81
msgid ""
"The following command line options are supported by all debhelper programs."
msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:84
+#: debhelper.pod:85
msgid "B<-v>, B<--verbose>"
msgstr "B<-v>, B<--verbose>"
# type: textblock
#. type: textblock
-#: debhelper.pod:86
+#: debhelper.pod:87
msgid ""
"Verbose mode: show all commands that modify the package build directory."
msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:88
+#: debhelper.pod:89
msgid "B<--no-act>"
msgstr "B<--no-act>"
# type: textblock
#. type: textblock
-#: debhelper.pod:90
+#: debhelper.pod:91
msgid ""
"Do not really do anything. If used with -v, the result is that the command "
"will output what it would have done."
# type: =item
#. type: =item
-#: debhelper.pod:93
+#: debhelper.pod:94
msgid "B<-a>, B<--arch>"
msgstr "B<-a>, B<--arch>"
# type: textblock
#. type: textblock
-#: debhelper.pod:95
+#: debhelper.pod:96
msgid "Act on all architecture dependent packages."
msgstr "Actuar en todos los paquetes dependientes de la arquitectura."
# type: =item
#. type: =item
-#: debhelper.pod:97
+#: debhelper.pod:98
msgid "B<-i>, B<--indep>"
msgstr "B<-i>, B<--indep>"
# type: textblock
#. type: textblock
-#: debhelper.pod:99
+#: debhelper.pod:100
msgid "Act on all architecture independent packages."
msgstr "Actuar en todos los paquetes independientes de la arquitectura."
# type: =item
#. type: =item
-#: debhelper.pod:101
+#: debhelper.pod:102
msgid "B<->I<ppackage>, B<--package=>I<package>"
msgstr "B<->I<ppaquete>, B<--package=>I<paquete>"
# type: textblock
#. type: textblock
-#: debhelper.pod:103
+#: debhelper.pod:104
msgid ""
"Act on the package named \"package\". This option may be specified multiple "
"times to make debhelper operate on a given set of packages."
# type: =item
#. type: =item
-#: debhelper.pod:106
+#: debhelper.pod:107
msgid "B<-s>, B<--same-arch>"
msgstr "B<-s>, B<--same-arch>"
# type: textblock
#. type: textblock
-#: debhelper.pod:108
+#: debhelper.pod:109
msgid ""
"This is a smarter version of the -a flag, that is used in some rare "
"circumstances. It understands that if the control file lists \"Architecture: "
# type: =item
#. type: =item
-#: debhelper.pod:116
+#: debhelper.pod:117
msgid "B<-N>I<package>, B<--no-package=>I<package>"
msgstr "B<-N>I<paquete>, B<--no-package=>I<paquete>"
# type: textblock
#. type: textblock
-#: debhelper.pod:118
+#: debhelper.pod:119
msgid ""
"Do not act on the specified package even if an -a, -i, or -p option lists "
"the package as one that should be acted on."
# type: =item
#. type: =item
-#: debhelper.pod:121
+#: debhelper.pod:122
#, fuzzy
msgid "B<--remaining-packages>"
msgstr "B<--mainpackage=>I<paquete>"
#. type: textblock
-#: debhelper.pod:123
+#: debhelper.pod:124
msgid ""
"Do not act on the packages which have already been acted on by this "
"debhelper command earlier (i.e. if the command is present in the package "
# type: =item
#. type: =item
-#: debhelper.pod:129
+#: debhelper.pod:130
#, fuzzy
msgid "B<--ignore=>I<file>"
msgstr "B<--name=>I<nombre>"
# type: textblock
#. type: textblock
-#: debhelper.pod:131
+#: debhelper.pod:132
msgid ""
"Ignore the specified file. This can be used if debian/ contains a debhelper "
"config file that a debhelper command should not act on. Note that debian/"
# type: textblock
#. type: textblock
-#: debhelper.pod:136
+#: debhelper.pod:137
msgid ""
"For example, if upstream ships a debian/init that you don't want "
"dh_installinit to install, use --ignore=debian/init"
# type: =item
#. type: =item
-#: debhelper.pod:139
+#: debhelper.pod:140
msgid "B<-P>I<tmpdir>, B<--tmpdir=>I<tmpdir>"
msgstr "B<-P>I<tmpdir>, B<--tmpdir=>I<tmpdir>"
# type: textblock
#. type: textblock
-#: debhelper.pod:141
+#: debhelper.pod:142
msgid ""
"Use \"tmpdir\" for package build directory. The default is debian/<package>"
msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:143
+#: debhelper.pod:144
msgid "B<--mainpackage=>I<package>"
msgstr "B<--mainpackage=>I<paquete>"
# type: textblock
#. type: textblock
-#: debhelper.pod:145
+#: debhelper.pod:146
msgid ""
"This little-used option changes the package which debhelper considers the "
"\"main package\", that is, the first one listed in debian/control, and the "
# type: =head1
#. type: =head1
-#: debhelper.pod:152
+#: debhelper.pod:153
msgid "COMMON DEBHELPER OPTIONS"
msgstr "OPCIONES COMUNES DE DEBHELPER"
# type: textblock
#. type: textblock
-#: debhelper.pod:154
+#: debhelper.pod:155
msgid ""
"The following command line options are supported by some debhelper "
"programs. See the man page of each program for a complete explanation of "
# type: =item
#. type: =item
-#: debhelper.pod:160
+#: debhelper.pod:161
msgid "B<-n>"
msgstr "B<-n>"
# type: textblock
#. type: textblock
-#: debhelper.pod:162
+#: debhelper.pod:163
msgid "Do not modify postinst/postrm/etc scripts."
msgstr "No modificar los scripts postinst/postrm/etc."
# type: =item
#. type: =item
-#: debhelper.pod:164 dh_compress:42 dh_makeshlibs:66 dh_md5sums:37
+#: debhelper.pod:165 dh_compress:42 dh_makeshlibs:66 dh_md5sums:37
#: dh_shlibdeps:36 dh_strip:39
msgid "B<-X>I<item>, B<--exclude=>I<item>"
msgstr "B<-X>I<elemento>, B<--exclude=>I<elemento>"
# type: textblock
#. type: textblock
-#: debhelper.pod:166
+#: debhelper.pod:167
msgid ""
"Exclude an item from processing. This option may be used multiple times, to "
"exclude more than one thing."
# type: =item
#. type: =item
-#: debhelper.pod:169 dh_compress:50 dh_installdirs:32 dh_installdocs:53
+#: debhelper.pod:170 dh_compress:50 dh_installdirs:32 dh_installdocs:53
#: dh_installexamples:33 dh_installinfo:41 dh_installman:62 dh_link:52
msgid "B<-A>, B<--all>"
msgstr "B<-A>, B<--all>"
# type: textblock
#. type: textblock
-#: debhelper.pod:171
+#: debhelper.pod:172
msgid ""
"Makes files or other items that are specified on the command line take "
"effect in ALL packages acted on, not just the first."
# type: =head1
#. type: =head1
-#: debhelper.pod:176 dh_installcatalogs:52 dh_installdocs:81
+#: debhelper.pod:177 dh_installcatalogs:52 dh_installdocs:81
#: dh_installemacsen:54 dh_installexamples:50 dh_installinfo:57
#: dh_installinit:110 dh_installman:79 dh_installmime:41 dh_installmodules:60
#: dh_installwm:53 dh_installxfonts:37 dh_movefiles:58 dh_scrollkeeper:42
# type: =head2
#. type: =head2
-#: debhelper.pod:178
+#: debhelper.pod:179
msgid "Multiple binary package support"
msgstr "Soporte para varios paquetes binarios"
# type: textblock
#. type: textblock
-#: debhelper.pod:180
+#: debhelper.pod:181
msgid ""
"If your source package generates more than one binary package, debhelper "
"programs will default to acting on all binary packages when run. If your "
# type: textblock
#. type: textblock
-#: debhelper.pod:188
+#: debhelper.pod:189
msgid ""
"To facilitate this, as well as give you more control over which packages are "
"acted on by debhelper programs, all debhelper programs accept the B<-a>, B<-"
# type: =head2
#. type: =head2
-#: debhelper.pod:194
+#: debhelper.pod:195
msgid "Automatic generation of debian install scripts"
msgstr "Generación automática de los scripts de instalación de debian"
# type: textblock
#. type: textblock
-#: debhelper.pod:196
+#: debhelper.pod:197
msgid ""
"Some debhelper commands will automatically generate parts of debian "
"maintainer scripts. If you want these automatically generated things "
# type: textblock
#. type: textblock
-#: debhelper.pod:203
+#: debhelper.pod:204
msgid ""
"If a script does not exist at all and debhelper needs to add something to "
"it, then debhelper will create the complete script."
# type: textblock
#. type: textblock
-#: debhelper.pod:206
+#: debhelper.pod:207
msgid ""
"All debhelper commands that automatically generate code in this way let it "
"be disabled by the -n parameter (see above)."
# type: textblock
#. type: textblock
-#: debhelper.pod:209
+#: debhelper.pod:210
msgid ""
"Note that the inserted code will be shell code, so you cannot directly use "
"it in a perl script. If you would like to embed it into a perl script, here "
# type: verbatim
#. type: verbatim
-#: debhelper.pod:214
+#: debhelper.pod:215
#, no-wrap
msgid ""
" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
# type: =head2
#. type: =head2
-#: debhelper.pod:220
+#: debhelper.pod:221
msgid "Automatic generation of miscellaneous dependencies."
msgstr "Generación automática de diversas dependencias."
# type: textblock
#. type: textblock
-#: debhelper.pod:222
+#: debhelper.pod:223
msgid ""
"Some debhelper commands may make the generated package need to depend on "
"some other packages. For example, if you use L<dh_installdebconf(1)>, your "
# type: textblock
#. type: textblock
-#: debhelper.pod:230
+#: debhelper.pod:231
msgid ""
"All commands of this type, besides documenting what dependencies may be "
"needed on their man pages, will automatically generate a substvar called "
# type: textblock
#. type: textblock
-#: debhelper.pod:235
+#: debhelper.pod:236
msgid ""
"This is entirely independent of the standard ${shlibs:Depends} generated by "
"L<dh_makeshlibs(1)>, and the ${perl:Depends} generated by L<dh_perl(1)>. "
# type: =head2
#. type: =head2
-#: debhelper.pod:240
+#: debhelper.pod:241
msgid "Package build directories"
msgstr "Directorios de construcción del paquete"
# type: textblock
#. type: textblock
-#: debhelper.pod:242
+#: debhelper.pod:243
msgid ""
"By default, all debhelper programs assume that the temporary directory used "
"for assembling the tree of files in a package is debian/<package>."
# type: textblock
#. type: textblock
-#: debhelper.pod:245
+#: debhelper.pod:246
msgid ""
"Sometimes, you might want to use some other temporary directory. This is "
"supported by the -P flag. For example, \"dh_installdocs -Pdebian/tmp\", will "
# type: =head2
#. type: =head2
-#: debhelper.pod:253
+#: debhelper.pod:254
msgid "Debhelper compatibility levels"
msgstr "Niveles de compatibilidad de debhelper"
# type: textblock
#. type: textblock
-#: debhelper.pod:255
+#: debhelper.pod:256
msgid ""
"From time to time, major non-backwards-compatible changes need to be made to "
"debhelper, to keep it clean and well-designed as needs change and its author "
# type: textblock
#. type: textblock
-#: debhelper.pod:262
+#: debhelper.pod:263
#, fuzzy
msgid ""
"Tell debhelper what compatibility level to use by writing a number to debian/"
# type: verbatim
#. type: verbatim
-#: debhelper.pod:265
+#: debhelper.pod:266
#, fuzzy, no-wrap
msgid ""
" % echo 7 > debian/compat\n"
# type: textblock
#. type: textblock
-#: debhelper.pod:267
+#: debhelper.pod:268
msgid ""
"Unless otherwise indicated, all debhelper documentation assumes that you are "
"using the most recent compatibility level, and in most cases does not "
# type: textblock
#. type: textblock
-#: debhelper.pod:274
+#: debhelper.pod:275
msgid "These are the available compatibility levels:"
msgstr "Los niveles de compatibilidad disponibles son:"
# type: =item
#. type: =item
-#: debhelper.pod:278
+#: debhelper.pod:279
msgid "V1"
msgstr "V1"
# type: textblock
#. type: textblock
-#: debhelper.pod:280
+#: debhelper.pod:281
msgid ""
"This is the original debhelper compatibility level, and so it is the default "
"one. In this mode, debhelper will use debian/tmp as the package tree "
# type: textblock
#. type: textblock
-#: debhelper.pod:285 debhelper.pod:292 debhelper.pod:315 debhelper.pod:344
+#: debhelper.pod:286 debhelper.pod:293 debhelper.pod:316 debhelper.pod:345
msgid "This mode is deprecated."
msgstr "Este modo está desaconsejado."
# type: =item
#. type: =item
-#: debhelper.pod:287
+#: debhelper.pod:288
msgid "V2"
msgstr "V2"
# type: textblock
#. type: textblock
-#: debhelper.pod:289
+#: debhelper.pod:290
msgid ""
"In this mode, debhelper will consistently use debian/<package> as the "
"package tree directory for every package that is built."
# type: =item
#. type: =item
-#: debhelper.pod:294
+#: debhelper.pod:295
msgid "V3"
msgstr "V3"
# type: textblock
#. type: textblock
-#: debhelper.pod:296
+#: debhelper.pod:297
msgid "This mode works like V2, with the following additions:"
msgstr "Este modo funciona como el V2 con los siguientes añadidos:"
# type: =item
#. type: =item
-#: debhelper.pod:300 debhelper.pod:305 debhelper.pod:309 debhelper.pod:323
-#: debhelper.pod:328 debhelper.pod:333 debhelper.pod:338 debhelper.pod:352
-#: debhelper.pod:356 debhelper.pod:361 debhelper.pod:365 debhelper.pod:377
-#: debhelper.pod:382 debhelper.pod:388 debhelper.pod:394 debhelper.pod:409
-#: debhelper.pod:416 debhelper.pod:420 debhelper.pod:424
+#: debhelper.pod:301 debhelper.pod:306 debhelper.pod:310 debhelper.pod:324
+#: debhelper.pod:329 debhelper.pod:334 debhelper.pod:339 debhelper.pod:353
+#: debhelper.pod:357 debhelper.pod:362 debhelper.pod:366 debhelper.pod:378
+#: debhelper.pod:383 debhelper.pod:389 debhelper.pod:395 debhelper.pod:410
+#: debhelper.pod:417 debhelper.pod:421 debhelper.pod:425
msgid "-"
msgstr "-"
# type: textblock
#. type: textblock
-#: debhelper.pod:302
+#: debhelper.pod:303
msgid ""
"Debhelper config files support globbing via * and ?, when appropriate. To "
"turn this off and use those characters raw, just prefix with a backslash."
# type: textblock
#. type: textblock
-#: debhelper.pod:307
+#: debhelper.pod:308
msgid "dh_makeshlibs makes the postinst and postrm scripts call ldconfig."
msgstr ""
"dh_makeshlibs hace que los scripts postinst y postrm ejecuten ldconfig."
# type: textblock
#. type: textblock
-#: debhelper.pod:311
+#: debhelper.pod:312
msgid ""
"Every file in etc/ is automatically flagged as a conffile by dh_installdeb."
msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:317
+#: debhelper.pod:318
msgid "V4"
msgstr "V4"
# type: textblock
#. type: textblock
-#: debhelper.pod:319
+#: debhelper.pod:320
msgid "Changes from V3 are:"
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:325
+#: debhelper.pod:326
msgid ""
"dh_makeshlibs -V will not include the debian part of the version number in "
"the generated dependency line in the shlibs file."
# type: textblock
#. type: textblock
-#: debhelper.pod:330
+#: debhelper.pod:331
msgid ""
"You are encouraged to put the new ${misc:Depends} into debian/control to "
"supplement the ${shlibs:Depends} field."
# type: textblock
#. type: textblock
-#: debhelper.pod:335
+#: debhelper.pod:336
msgid ""
"dh_fixperms will make all files in bin/ directories and in etc/init.d "
"executable."
# type: textblock
#. type: textblock
-#: debhelper.pod:340
+#: debhelper.pod:341
msgid "dh_link will correct existing links to conform with policy."
msgstr ""
"dh_link corregirá los enlaces existentes para ajustarse a la política de "
# type: =item
#. type: =item
-#: debhelper.pod:346
+#: debhelper.pod:347
msgid "V5"
msgstr "V5"
# type: textblock
#. type: textblock
-#: debhelper.pod:348
+#: debhelper.pod:349
msgid "Changes from V4 are:"
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:354
+#: debhelper.pod:355
msgid "Comments are ignored in debhelper config files."
msgstr ""
"Se ignoran los comentarios en los ficheros de configuración de debhelper."
# type: textblock
#. type: textblock
-#: debhelper.pod:358
+#: debhelper.pod:359
msgid ""
"dh_strip --dbg-package now specifies the name of a package to put debugging "
"symbols in, not the packages to take the symbols from."
# type: textblock
#. type: textblock
-#: debhelper.pod:363
+#: debhelper.pod:364
msgid "dh_installdocs skips installing empty files."
msgstr "dh_installdocs no instala ficheros vacíos."
# type: textblock
#. type: textblock
-#: debhelper.pod:367
+#: debhelper.pod:368
msgid "dh_install errors out if wildcards expand to nothing."
msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:371
+#: debhelper.pod:372
msgid "V6"
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:373
+#: debhelper.pod:374
msgid "Changes from V5 are:"
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:379
+#: debhelper.pod:380
msgid ""
"Commands that generate maintainer script fragments will order the fragments "
"in reverse order for the prerm and postrm scripts."
# type: textblock
#. type: textblock
-#: debhelper.pod:384
+#: debhelper.pod:385
#, fuzzy
msgid ""
"dh_installwm will install a slave manpage link for x-window-manager.1.gz, if "
# type: textblock
#. type: textblock
-#: debhelper.pod:390
+#: debhelper.pod:391
msgid ""
"dh_builddeb did not previously delete everything matching DH_ALWAYS_EXCLUDE, "
"if it was set to a list of things to exclude, such as \"CVS:.svn:.git\". Now "
# type: textblock
#. type: textblock
-#: debhelper.pod:396
+#: debhelper.pod:397
msgid ""
"dh_installman allows overwriting existing man pages in the package build "
"directory. In previous compatibility levels it silently refuses to do this."
# type: =item
#. type: =item
-#: debhelper.pod:401
+#: debhelper.pod:402
msgid "V7"
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:403
+#: debhelper.pod:404
#, fuzzy
msgid "This is the recommended mode of operation."
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:405
+#: debhelper.pod:406
msgid "Changes from V6 are:"
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:411
+#: debhelper.pod:412
msgid ""
"dh_install, will fall back to looking for files in debian/tmp if it doesn't "
"find them in the current directory (or wherever you tell it look using --"
# type: textblock
#. type: textblock
-#: debhelper.pod:418
+#: debhelper.pod:419
msgid "dh_clean will read debian/clean and delete files listed there."
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:422
+#: debhelper.pod:423
msgid "dh_clean will delete toplevel *-stamp files."
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:426
+#: debhelper.pod:427
msgid ""
"dh_installchangelogs will guess at what file is the upstream changelog if "
"none is specified."
# type: =head2
#. type: =head2
-#: debhelper.pod:433
+#: debhelper.pod:434
msgid "Doc directory symlinks"
msgstr "Enlaces a los directorios Doc"
# type: textblock
#. type: textblock
-#: debhelper.pod:435
+#: debhelper.pod:436
msgid ""
"Sometimes it is useful to make a package not contain a /usr/share/doc/"
"package directory at all, instead placing just a dangling symlink in the "
# type: =head2
#. type: =head2
-#: debhelper.pod:444
+#: debhelper.pod:445
msgid "udebs"
msgstr "udebs"
# type: textblock
#. type: textblock
-#: debhelper.pod:446
+#: debhelper.pod:447
msgid ""
"Debhelper includes support for udebs. To create a udeb with debhelper, add "
"\"XC-Package-Type: udeb\" to the package's stanza in debian/control, and "
# type: =head2
#. type: =head2
-#: debhelper.pod:453
+#: debhelper.pod:454
msgid "Other notes"
msgstr "Otras notas"
# type: textblock
#. type: textblock
-#: debhelper.pod:455
+#: debhelper.pod:456
msgid ""
"In general, if any debhelper program needs a directory to exist under "
"debian/, it will create it. I haven't bothered to document this in all the "
# type: textblock
#. type: textblock
-#: debhelper.pod:461
+#: debhelper.pod:462
#, fuzzy
msgid ""
"Once your package uses debhelper to build, be sure to add debhelper to your "
# type: verbatim
#. type: verbatim
-#: debhelper.pod:467
+#: debhelper.pod:468
#, fuzzy, no-wrap
msgid ""
" Build-Depends: debhelper (>= 7)\n"
# type: =head1
#. type: =head1
-#: debhelper.pod:469
+#: debhelper.pod:470
msgid "ENVIRONMENT"
msgstr "ENTORNO"
# type: =item
#. type: =item
-#: debhelper.pod:473
+#: debhelper.pod:474
msgid "DH_VERBOSE"
msgstr "DH_VERBOSE"
# type: textblock
#. type: textblock
-#: debhelper.pod:475
+#: debhelper.pod:476
msgid ""
"Set to 1 to enable verbose mode. Debhelper will output every command it runs "
"that modifies files on the build system."
# type: =item
#. type: =item
-#: debhelper.pod:478
+#: debhelper.pod:479
msgid "DH_COMPAT"
msgstr "DH_COMPAT"
# type: textblock
#. type: textblock
-#: debhelper.pod:480
+#: debhelper.pod:481
msgid ""
"Temporarily specifies what compatibility level debhelper should run at, "
"overriding any value in debian/compat."
# type: =item
#. type: =item
-#: debhelper.pod:483
+#: debhelper.pod:484
msgid "DH_NO_ACT"
msgstr "DH_NO_ACT"
# type: textblock
#. type: textblock
-#: debhelper.pod:485
+#: debhelper.pod:486
msgid "Set to 1 to enable no-act mode."
msgstr "Poner a 1 para habilitar el modo no-act."
# type: =item
#. type: =item
-#: debhelper.pod:487
+#: debhelper.pod:488
msgid "DH_OPTIONS"
msgstr "DH_OPTIONS"
# type: textblock
#. type: textblock
-#: debhelper.pod:489
+#: debhelper.pod:490
msgid ""
"Anything in this variable will be prepended to the command line arguments of "
"all debhelper commands. Command-specific options will be ignored by commands "
# type: textblock
#. type: textblock
-#: debhelper.pod:493
+#: debhelper.pod:494
#, fuzzy
msgid ""
"This is useful in some situations, for example, if you need to pass -p to "
# type: =item
#. type: =item
-#: debhelper.pod:498
+#: debhelper.pod:499
msgid "DH_ALWAYS_EXCLUDE"
msgstr "DH_ALWAYS_EXCLUDE"
# type: textblock
#. type: textblock
-#: debhelper.pod:500
+#: debhelper.pod:501
msgid ""
"If set, this adds the value the variable is set to to the -X options of all "
"commands that support the -X option. Moreover, dh_builddeb will rm -rf "
# type: textblock
#. type: textblock
-#: debhelper.pod:504
+#: debhelper.pod:505
msgid ""
"This can be useful if you are doing a build from a CVS source tree, in which "
"case setting DH_ALWAYS_EXCLUDE=CVS will prevent any CVS directories from "
# type: textblock
#. type: textblock
-#: debhelper.pod:511
+#: debhelper.pod:512
msgid ""
"Multiple things to exclude can be separated with colons, as in "
"DH_ALWAYS_EXCLUDE=CVS:.svn"
# type: =head1
#. type: =head1
-#: debhelper.pod:516 dh_builddeb:87 dh_clean:130 dh_compress:190 dh_desktop:27
-#: dh_fixperms:110 dh_gconf:106 dh_gencontrol:79 dh_installcatalogs:109
+#: debhelper.pod:517 dh_builddeb:87 dh_clean:130 dh_compress:190 dh_desktop:27
+#: dh_fixperms:122 dh_gconf:106 dh_gencontrol:79 dh_installcatalogs:109
#: dh_installchangelogs:147 dh_installcron:61 dh_installdebconf:118
#: dh_installdeb:94 dh_installdirs:83 dh_installdocs:223 dh_installemacsen:111
#: dh_installexamples:103 dh_installinfo:103 dh_installinit:224
# type: =item
#. type: =item
-#: debhelper.pod:520
+#: debhelper.pod:521
msgid "F</usr/share/doc/debhelper/examples/>"
msgstr "F</usr/share/doc/debhelper/examples/>"
# type: textblock
#. type: textblock
-#: debhelper.pod:522
+#: debhelper.pod:523
msgid "A set of example debian/rules files that use debhelper."
msgstr "Varios ficheros de ejemplo debian/rules que usan debhelper."
# type: =item
#. type: =item
-#: debhelper.pod:524
+#: debhelper.pod:525
msgid "L<http://kitenet.net/~joey/code/debhelper/>"
msgstr "L<http://kitenet.net/~joey/code/debhelper/>"
# type: textblock
#. type: textblock
-#: debhelper.pod:526
+#: debhelper.pod:527
msgid "Debhelper web site."
msgstr "Web de Debhelper."
# type: =head1
#. type: =head1
-#: debhelper.pod:530 dh_builddeb:93 dh_clean:136 dh_compress:196 dh_desktop:33
-#: dh_fixperms:116 dh_gconf:112 dh_gencontrol:85 dh_installcatalogs:115
+#: debhelper.pod:531 dh_builddeb:93 dh_clean:136 dh_compress:196 dh_desktop:33
+#: dh_fixperms:128 dh_gconf:112 dh_gencontrol:85 dh_installcatalogs:115
#: dh_installchangelogs:153 dh_installcron:67 dh_installdebconf:124
#: dh_installdeb:100 dh_installdirs:89 dh_installdocs:229
#: dh_installemacsen:117 dh_installexamples:109 dh_installinfo:109
# type: textblock
#. type: textblock
-#: debhelper.pod:532 dh_builddeb:95 dh_clean:138 dh_compress:198
-#: dh_fixperms:118 dh_gencontrol:87 dh_installchangelogs:155 dh_installcron:69
+#: debhelper.pod:533 dh_builddeb:95 dh_clean:138 dh_compress:198
+#: dh_fixperms:130 dh_gencontrol:87 dh_installchangelogs:155 dh_installcron:69
#: dh_installdebconf:126 dh_installdeb:102 dh_installdirs:91
#: dh_installdocs:231 dh_installemacsen:119 dh_installexamples:111
#: dh_installinfo:111 dh_installinit:232 dh_installlogrotate:58
# type: textblock
#. type: textblock
-#: dh_builddeb:89 dh_clean:132 dh_compress:192 dh_fixperms:112 dh_gconf:108
+#: dh_builddeb:89 dh_clean:132 dh_compress:192 dh_fixperms:124 dh_gconf:108
#: dh_gencontrol:81 dh_installcatalogs:111 dh_installchangelogs:149
#: dh_installcron:63 dh_installdebconf:120 dh_installdeb:96 dh_installdirs:85
#: dh_installdocs:225 dh_installemacsen:113 dh_installexamples:105
# type: textblock
#. type: textblock
-#: dh_builddeb:91 dh_clean:134 dh_compress:194 dh_desktop:31 dh_fixperms:114
+#: dh_builddeb:91 dh_clean:134 dh_compress:194 dh_desktop:31 dh_fixperms:126
#: dh_gconf:110 dh_gencontrol:83 dh_installchangelogs:151 dh_installcron:65
#: dh_installdebconf:122 dh_installdeb:98 dh_installdirs:87 dh_installdocs:227
#: dh_installemacsen:115 dh_installexamples:107 dh_installinfo:107
msgid ""
msgstr ""
"Project-Id-Version: debhelper manpages\n"
-"POT-Creation-Date: 2009-04-20 16:15-0300\n"
+"POT-Creation-Date: 2009-05-12 14:52-0300\n"
"PO-Revision-Date: 2006-11-19 20:50+0100\n"
"Last-Translator: Valery Perrin <valery.perrin.debian@free.fr>\n"
"Language-Team: French <debian-l10n-french@lists.debian.org>\n"
#, fuzzy
msgid ""
"In some rare cases, you may want to have different versions of these files "
-"for different architectures. If files named debian/package.foo.arch exist, "
-"where \"arch\" is the same as the output of \"dpkg-architecture -"
-"qDEB_HOST_ARCH\", then they will be used in preference to other, more "
+"for different architectures or OSes. If files named debian/package.foo.ARCH "
+"or debian/package.foo.OS exist, where \"ARCH\" and \"OS\" are the same as "
+"the output of \"dpkg-architecture -qDEB_HOST_ARCH\" / \"dpkg-architecture -"
+"qDEB_HOST_ARCH_OS\", then they will be used in preference to other, more "
"general files."
msgstr ""
"Dans quelques rares cas, il peut être utile d'exploiter différentes versions "
# type: textblock
#. type: textblock
-#: debhelper.pod:70
+#: debhelper.pod:71
msgid ""
"In many cases, these config files are used to specify various types of "
"files. Documentation or example files to install, files to move, and so on. "
# type: textblock
#. type: textblock
-#: debhelper.pod:75
+#: debhelper.pod:76
msgid ""
"You can also put comments in these files; lines beginning with \"#\" are "
"ignored."
# type: =head1
#. type: =head1
-#: debhelper.pod:78
+#: debhelper.pod:79
msgid "SHARED DEBHELPER OPTIONS"
msgstr "OPTIONS PARTAGÉES DE DEBHELPER"
# type: textblock
#. type: textblock
-#: debhelper.pod:80
+#: debhelper.pod:81
msgid ""
"The following command line options are supported by all debhelper programs."
msgstr "Tous les programmes de debhelper acceptent les options S<suivantes :>"
# type: =item
#. type: =item
-#: debhelper.pod:84
+#: debhelper.pod:85
msgid "B<-v>, B<--verbose>"
msgstr "B<-v>, B<--verbose>"
# type: textblock
#. type: textblock
-#: debhelper.pod:86
+#: debhelper.pod:87
msgid ""
"Verbose mode: show all commands that modify the package build directory."
msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:88
+#: debhelper.pod:89
msgid "B<--no-act>"
msgstr "B<--no-act>"
# type: textblock
#. type: textblock
-#: debhelper.pod:90
+#: debhelper.pod:91
msgid ""
"Do not really do anything. If used with -v, the result is that the command "
"will output what it would have done."
# type: =item
#. type: =item
-#: debhelper.pod:93
+#: debhelper.pod:94
msgid "B<-a>, B<--arch>"
msgstr "B<-a>, B<--arch>"
# type: textblock
#. type: textblock
-#: debhelper.pod:95
+#: debhelper.pod:96
msgid "Act on all architecture dependent packages."
msgstr "Construit tous les paquets dépendants d'une architecture."
# type: =item
#. type: =item
-#: debhelper.pod:97
+#: debhelper.pod:98
msgid "B<-i>, B<--indep>"
msgstr "B<-i>, B<--indep>"
# type: textblock
#. type: textblock
-#: debhelper.pod:99
+#: debhelper.pod:100
msgid "Act on all architecture independent packages."
msgstr "Construit tous les paquets indépendants de l'architecture."
# type: =item
#. type: =item
-#: debhelper.pod:101
+#: debhelper.pod:102
msgid "B<->I<ppackage>, B<--package=>I<package>"
msgstr "B<-p>I<paquet>, B<--package=>I<paquet>"
# type: textblock
#. type: textblock
-#: debhelper.pod:103
+#: debhelper.pod:104
msgid ""
"Act on the package named \"package\". This option may be specified multiple "
"times to make debhelper operate on a given set of packages."
# type: =item
#. type: =item
-#: debhelper.pod:106
+#: debhelper.pod:107
msgid "B<-s>, B<--same-arch>"
msgstr "B<-s>, B<--same-arch>"
# type: textblock
#. type: textblock
-#: debhelper.pod:108
+#: debhelper.pod:109
msgid ""
"This is a smarter version of the -a flag, that is used in some rare "
"circumstances. It understands that if the control file lists \"Architecture: "
# type: =item
#. type: =item
-#: debhelper.pod:116
+#: debhelper.pod:117
msgid "B<-N>I<package>, B<--no-package=>I<package>"
msgstr "B<-N>I<paquet>, B<--no-package=>I<paquet>"
# type: textblock
#. type: textblock
-#: debhelper.pod:118
+#: debhelper.pod:119
msgid ""
"Do not act on the specified package even if an -a, -i, or -p option lists "
"the package as one that should be acted on."
# type: =item
#. type: =item
-#: debhelper.pod:121
+#: debhelper.pod:122
#, fuzzy
msgid "B<--remaining-packages>"
msgstr "B<--mainpackage=>I<paquet>"
#. type: textblock
-#: debhelper.pod:123
+#: debhelper.pod:124
msgid ""
"Do not act on the packages which have already been acted on by this "
"debhelper command earlier (i.e. if the command is present in the package "
# type: =item
#. type: =item
-#: debhelper.pod:129
+#: debhelper.pod:130
#, fuzzy
msgid "B<--ignore=>I<file>"
msgstr "B<--name=>I<nom>"
# type: textblock
#. type: textblock
-#: debhelper.pod:131
+#: debhelper.pod:132
msgid ""
"Ignore the specified file. This can be used if debian/ contains a debhelper "
"config file that a debhelper command should not act on. Note that debian/"
# type: textblock
#. type: textblock
-#: debhelper.pod:136
+#: debhelper.pod:137
msgid ""
"For example, if upstream ships a debian/init that you don't want "
"dh_installinit to install, use --ignore=debian/init"
# type: =item
#. type: =item
-#: debhelper.pod:139
+#: debhelper.pod:140
msgid "B<-P>I<tmpdir>, B<--tmpdir=>I<tmpdir>"
msgstr "B<-P>I<tmpdir>, B<--tmpdir=>I<tmpdir>"
# type: textblock
#. type: textblock
-#: debhelper.pod:141
+#: debhelper.pod:142
msgid ""
"Use \"tmpdir\" for package build directory. The default is debian/<package>"
msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:143
+#: debhelper.pod:144
msgid "B<--mainpackage=>I<package>"
msgstr "B<--mainpackage=>I<paquet>"
# type: textblock
#. type: textblock
-#: debhelper.pod:145
+#: debhelper.pod:146
msgid ""
"This little-used option changes the package which debhelper considers the "
"\"main package\", that is, the first one listed in debian/control, and the "
# type: =head1
#. type: =head1
-#: debhelper.pod:152
+#: debhelper.pod:153
msgid "COMMON DEBHELPER OPTIONS"
msgstr "OPTIONS COURANTES DE DEBHELPER"
# type: textblock
#. type: textblock
-#: debhelper.pod:154
+#: debhelper.pod:155
msgid ""
"The following command line options are supported by some debhelper "
"programs. See the man page of each program for a complete explanation of "
# type: =item
#. type: =item
-#: debhelper.pod:160
+#: debhelper.pod:161
msgid "B<-n>"
msgstr "B<-n>"
# type: textblock
#. type: textblock
-#: debhelper.pod:162
+#: debhelper.pod:163
msgid "Do not modify postinst/postrm/etc scripts."
msgstr ""
"Ne pas modifier les scripts de maintenance du paquet (postinst, postrm, "
# type: =item
#. type: =item
-#: debhelper.pod:164 dh_compress:42 dh_makeshlibs:66 dh_md5sums:37
+#: debhelper.pod:165 dh_compress:42 dh_makeshlibs:66 dh_md5sums:37
#: dh_shlibdeps:36 dh_strip:39
msgid "B<-X>I<item>, B<--exclude=>I<item>"
msgstr "B<-X>I<élément>, B<--exclude=>I<élément>"
# type: textblock
#. type: textblock
-#: debhelper.pod:166
+#: debhelper.pod:167
msgid ""
"Exclude an item from processing. This option may be used multiple times, to "
"exclude more than one thing."
# type: =item
#. type: =item
-#: debhelper.pod:169 dh_compress:50 dh_installdirs:32 dh_installdocs:53
+#: debhelper.pod:170 dh_compress:50 dh_installdirs:32 dh_installdocs:53
#: dh_installexamples:33 dh_installinfo:41 dh_installman:62 dh_link:52
msgid "B<-A>, B<--all>"
msgstr "B<-A>, B<--all>"
# type: textblock
#. type: textblock
-#: debhelper.pod:171
+#: debhelper.pod:172
msgid ""
"Makes files or other items that are specified on the command line take "
"effect in ALL packages acted on, not just the first."
# type: =head1
#. type: =head1
-#: debhelper.pod:176 dh_installcatalogs:52 dh_installdocs:81
+#: debhelper.pod:177 dh_installcatalogs:52 dh_installdocs:81
#: dh_installemacsen:54 dh_installexamples:50 dh_installinfo:57
#: dh_installinit:110 dh_installman:79 dh_installmime:41 dh_installmodules:60
#: dh_installwm:53 dh_installxfonts:37 dh_movefiles:58 dh_scrollkeeper:42
# type: =head2
#. type: =head2
-#: debhelper.pod:178
+#: debhelper.pod:179
msgid "Multiple binary package support"
msgstr "Prise en charge de plusieurs paquets binaires"
# type: textblock
#. type: textblock
-#: debhelper.pod:180
+#: debhelper.pod:181
msgid ""
"If your source package generates more than one binary package, debhelper "
"programs will default to acting on all binary packages when run. If your "
# type: textblock
#. type: textblock
-#: debhelper.pod:188
+#: debhelper.pod:189
msgid ""
"To facilitate this, as well as give you more control over which packages are "
"acted on by debhelper programs, all debhelper programs accept the B<-a>, B<-"
# type: =head2
#. type: =head2
-#: debhelper.pod:194
+#: debhelper.pod:195
msgid "Automatic generation of debian install scripts"
msgstr "Génération automatique des scripts Debian de maintenance du paquet"
# type: textblock
#. type: textblock
-#: debhelper.pod:196
+#: debhelper.pod:197
msgid ""
"Some debhelper commands will automatically generate parts of debian "
"maintainer scripts. If you want these automatically generated things "
# type: textblock
#. type: textblock
-#: debhelper.pod:203
+#: debhelper.pod:204
msgid ""
"If a script does not exist at all and debhelper needs to add something to "
"it, then debhelper will create the complete script."
# type: textblock
#. type: textblock
-#: debhelper.pod:206
+#: debhelper.pod:207
msgid ""
"All debhelper commands that automatically generate code in this way let it "
"be disabled by the -n parameter (see above)."
# type: textblock
#. type: textblock
-#: debhelper.pod:209
+#: debhelper.pod:210
msgid ""
"Note that the inserted code will be shell code, so you cannot directly use "
"it in a perl script. If you would like to embed it into a perl script, here "
# type: verbatim
#. type: verbatim
-#: debhelper.pod:214
+#: debhelper.pod:215
#, no-wrap
msgid ""
" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
# type: =head2
#. type: =head2
-#: debhelper.pod:220
+#: debhelper.pod:221
msgid "Automatic generation of miscellaneous dependencies."
msgstr "Génération automatique des diverses dépendances."
# type: textblock
#. type: textblock
-#: debhelper.pod:222
+#: debhelper.pod:223
msgid ""
"Some debhelper commands may make the generated package need to depend on "
"some other packages. For example, if you use L<dh_installdebconf(1)>, your "
# type: textblock
#. type: textblock
-#: debhelper.pod:230
+#: debhelper.pod:231
msgid ""
"All commands of this type, besides documenting what dependencies may be "
"needed on their man pages, will automatically generate a substvar called "
# type: textblock
#. type: textblock
-#: debhelper.pod:235
+#: debhelper.pod:236
msgid ""
"This is entirely independent of the standard ${shlibs:Depends} generated by "
"L<dh_makeshlibs(1)>, and the ${perl:Depends} generated by L<dh_perl(1)>. "
# type: =head2
#. type: =head2
-#: debhelper.pod:240
+#: debhelper.pod:241
msgid "Package build directories"
msgstr "Répertoires de construction du paquet"
# type: textblock
#. type: textblock
-#: debhelper.pod:242
+#: debhelper.pod:243
msgid ""
"By default, all debhelper programs assume that the temporary directory used "
"for assembling the tree of files in a package is debian/<package>."
# type: textblock
#. type: textblock
-#: debhelper.pod:245
+#: debhelper.pod:246
msgid ""
"Sometimes, you might want to use some other temporary directory. This is "
"supported by the -P flag. For example, \"dh_installdocs -Pdebian/tmp\", will "
# type: =head2
#. type: =head2
-#: debhelper.pod:253
+#: debhelper.pod:254
msgid "Debhelper compatibility levels"
msgstr "Niveaux de compatibilité de debhelper"
# type: textblock
#. type: textblock
-#: debhelper.pod:255
+#: debhelper.pod:256
msgid ""
"From time to time, major non-backwards-compatible changes need to be made to "
"debhelper, to keep it clean and well-designed as needs change and its author "
# type: textblock
#. type: textblock
-#: debhelper.pod:262
+#: debhelper.pod:263
#, fuzzy
msgid ""
"Tell debhelper what compatibility level to use by writing a number to debian/"
# type: verbatim
#. type: verbatim
-#: debhelper.pod:265
+#: debhelper.pod:266
#, fuzzy, no-wrap
msgid ""
" % echo 7 > debian/compat\n"
# type: textblock
#. type: textblock
-#: debhelper.pod:267
+#: debhelper.pod:268
msgid ""
"Unless otherwise indicated, all debhelper documentation assumes that you are "
"using the most recent compatibility level, and in most cases does not "
# type: textblock
#. type: textblock
-#: debhelper.pod:274
+#: debhelper.pod:275
msgid "These are the available compatibility levels:"
msgstr "Les niveaux de compatibilité sont les S<suivants :>"
# type: =item
#. type: =item
-#: debhelper.pod:278
+#: debhelper.pod:279
msgid "V1"
msgstr "V1"
# type: textblock
#. type: textblock
-#: debhelper.pod:280
+#: debhelper.pod:281
msgid ""
"This is the original debhelper compatibility level, and so it is the default "
"one. In this mode, debhelper will use debian/tmp as the package tree "
# type: textblock
#. type: textblock
-#: debhelper.pod:285 debhelper.pod:292 debhelper.pod:315 debhelper.pod:344
+#: debhelper.pod:286 debhelper.pod:293 debhelper.pod:316 debhelper.pod:345
msgid "This mode is deprecated."
msgstr "Ce mode est déconseillé."
# type: =item
#. type: =item
-#: debhelper.pod:287
+#: debhelper.pod:288
msgid "V2"
msgstr "V2"
# type: textblock
#. type: textblock
-#: debhelper.pod:289
+#: debhelper.pod:290
msgid ""
"In this mode, debhelper will consistently use debian/<package> as the "
"package tree directory for every package that is built."
# type: =item
#. type: =item
-#: debhelper.pod:294
+#: debhelper.pod:295
msgid "V3"
msgstr "V3"
# type: textblock
#. type: textblock
-#: debhelper.pod:296
+#: debhelper.pod:297
msgid "This mode works like V2, with the following additions:"
msgstr "Ce mode fonctionne comme V2 mais avec les ajouts S<suivants :>"
# type: =item
#. type: =item
-#: debhelper.pod:300 debhelper.pod:305 debhelper.pod:309 debhelper.pod:323
-#: debhelper.pod:328 debhelper.pod:333 debhelper.pod:338 debhelper.pod:352
-#: debhelper.pod:356 debhelper.pod:361 debhelper.pod:365 debhelper.pod:377
-#: debhelper.pod:382 debhelper.pod:388 debhelper.pod:394 debhelper.pod:409
-#: debhelper.pod:416 debhelper.pod:420 debhelper.pod:424
+#: debhelper.pod:301 debhelper.pod:306 debhelper.pod:310 debhelper.pod:324
+#: debhelper.pod:329 debhelper.pod:334 debhelper.pod:339 debhelper.pod:353
+#: debhelper.pod:357 debhelper.pod:362 debhelper.pod:366 debhelper.pod:378
+#: debhelper.pod:383 debhelper.pod:389 debhelper.pod:395 debhelper.pod:410
+#: debhelper.pod:417 debhelper.pod:421 debhelper.pod:425
msgid "-"
msgstr "-"
# type: textblock
#. type: textblock
-#: debhelper.pod:302
+#: debhelper.pod:303
msgid ""
"Debhelper config files support globbing via * and ?, when appropriate. To "
"turn this off and use those characters raw, just prefix with a backslash."
# type: textblock
#. type: textblock
-#: debhelper.pod:307
+#: debhelper.pod:308
msgid "dh_makeshlibs makes the postinst and postrm scripts call ldconfig."
msgstr ""
"Les scripts de maintenance du paquet (postinst et postrm) feront appel à "
# type: textblock
#. type: textblock
-#: debhelper.pod:311
+#: debhelper.pod:312
msgid ""
"Every file in etc/ is automatically flagged as a conffile by dh_installdeb."
msgstr ""
# type: =item
#. type: =item
-#: debhelper.pod:317
+#: debhelper.pod:318
msgid "V4"
msgstr "V4"
# type: textblock
#. type: textblock
-#: debhelper.pod:319
+#: debhelper.pod:320
msgid "Changes from V3 are:"
msgstr "Les changements par rapport à la version 3 S<sont :>"
# type: textblock
#. type: textblock
-#: debhelper.pod:325
+#: debhelper.pod:326
msgid ""
"dh_makeshlibs -V will not include the debian part of the version number in "
"the generated dependency line in the shlibs file."
# type: textblock
#. type: textblock
-#: debhelper.pod:330
+#: debhelper.pod:331
msgid ""
"You are encouraged to put the new ${misc:Depends} into debian/control to "
"supplement the ${shlibs:Depends} field."
# type: textblock
#. type: textblock
-#: debhelper.pod:335
+#: debhelper.pod:336
msgid ""
"dh_fixperms will make all files in bin/ directories and in etc/init.d "
"executable."
# type: textblock
#. type: textblock
-#: debhelper.pod:340
+#: debhelper.pod:341
msgid "dh_link will correct existing links to conform with policy."
msgstr ""
"dh_link corrigera les liens existants pour les rendre conformes à la Charte "
# type: =item
#. type: =item
-#: debhelper.pod:346
+#: debhelper.pod:347
msgid "V5"
msgstr "V5"
# type: textblock
#. type: textblock
-#: debhelper.pod:348
+#: debhelper.pod:349
#, fuzzy
msgid "Changes from V4 are:"
msgstr "Les changements par rapport à la version 3 S<sont :>"
# type: textblock
#. type: textblock
-#: debhelper.pod:354
+#: debhelper.pod:355
msgid "Comments are ignored in debhelper config files."
msgstr ""
"Les commentaires sont ignorés dans les fichiers de configuration de "
# type: textblock
#. type: textblock
-#: debhelper.pod:358
+#: debhelper.pod:359
msgid ""
"dh_strip --dbg-package now specifies the name of a package to put debugging "
"symbols in, not the packages to take the symbols from."
# type: textblock
#. type: textblock
-#: debhelper.pod:363
+#: debhelper.pod:364
msgid "dh_installdocs skips installing empty files."
msgstr "dh_installdocs saute l'installation des fichiers vides."
# type: textblock
#. type: textblock
-#: debhelper.pod:367
+#: debhelper.pod:368
msgid "dh_install errors out if wildcards expand to nothing."
msgstr ""
"dh_install génère des erreurs si les jokers (wildcards) ne correspondent à "
# type: =item
#. type: =item
-#: debhelper.pod:371
+#: debhelper.pod:372
msgid "V6"
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:373
+#: debhelper.pod:374
#, fuzzy
msgid "Changes from V5 are:"
msgstr "Les changements par rapport à la version 3 S<sont :>"
# type: textblock
#. type: textblock
-#: debhelper.pod:379
+#: debhelper.pod:380
msgid ""
"Commands that generate maintainer script fragments will order the fragments "
"in reverse order for the prerm and postrm scripts."
# type: textblock
#. type: textblock
-#: debhelper.pod:384
+#: debhelper.pod:385
#, fuzzy
msgid ""
"dh_installwm will install a slave manpage link for x-window-manager.1.gz, if "
# type: textblock
#. type: textblock
-#: debhelper.pod:390
+#: debhelper.pod:391
msgid ""
"dh_builddeb did not previously delete everything matching DH_ALWAYS_EXCLUDE, "
"if it was set to a list of things to exclude, such as \"CVS:.svn:.git\". Now "
# type: textblock
#. type: textblock
-#: debhelper.pod:396
+#: debhelper.pod:397
msgid ""
"dh_installman allows overwriting existing man pages in the package build "
"directory. In previous compatibility levels it silently refuses to do this."
# type: =item
#. type: =item
-#: debhelper.pod:401
+#: debhelper.pod:402
msgid "V7"
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:403
+#: debhelper.pod:404
#, fuzzy
msgid "This is the recommended mode of operation."
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:405
+#: debhelper.pod:406
#, fuzzy
msgid "Changes from V6 are:"
msgstr "Les changements par rapport à la version 3 S<sont :>"
# type: textblock
#. type: textblock
-#: debhelper.pod:411
+#: debhelper.pod:412
msgid ""
"dh_install, will fall back to looking for files in debian/tmp if it doesn't "
"find them in the current directory (or wherever you tell it look using --"
# type: textblock
#. type: textblock
-#: debhelper.pod:418
+#: debhelper.pod:419
msgid "dh_clean will read debian/clean and delete files listed there."
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:422
+#: debhelper.pod:423
msgid "dh_clean will delete toplevel *-stamp files."
msgstr ""
# type: textblock
#. type: textblock
-#: debhelper.pod:426
+#: debhelper.pod:427
msgid ""
"dh_installchangelogs will guess at what file is the upstream changelog if "
"none is specified."
# type: =head2
#. type: =head2
-#: debhelper.pod:433
+#: debhelper.pod:434
msgid "Doc directory symlinks"
msgstr "Liens symboliques vers le répertoire de documentation"
# type: textblock
#. type: textblock
-#: debhelper.pod:435
+#: debhelper.pod:436
msgid ""
"Sometimes it is useful to make a package not contain a /usr/share/doc/"
"package directory at all, instead placing just a dangling symlink in the "
# type: =head2
#. type: =head2
-#: debhelper.pod:444
+#: debhelper.pod:445
msgid "udebs"
msgstr "udebs"
# type: textblock
#. type: textblock
-#: debhelper.pod:446
+#: debhelper.pod:447
msgid ""
"Debhelper includes support for udebs. To create a udeb with debhelper, add "
"\"XC-Package-Type: udeb\" to the package's stanza in debian/control, and "
# type: =head2
#. type: =head2
-#: debhelper.pod:453
+#: debhelper.pod:454
msgid "Other notes"
msgstr "Autres remarques"
# type: textblock
#. type: textblock
-#: debhelper.pod:455
+#: debhelper.pod:456
msgid ""
"In general, if any debhelper program needs a directory to exist under "
"debian/, it will create it. I haven't bothered to document this in all the "
# type: textblock
#. type: textblock
-#: debhelper.pod:461
+#: debhelper.pod:462
#, fuzzy
msgid ""
"Once your package uses debhelper to build, be sure to add debhelper to your "
# type: verbatim
#. type: verbatim
-#: debhelper.pod:467
+#: debhelper.pod:468
#, fuzzy, no-wrap
msgid ""
" Build-Depends: debhelper (>= 7)\n"
# type: =head1
#. type: =head1
-#: debhelper.pod:469
+#: debhelper.pod:470
msgid "ENVIRONMENT"
msgstr "VARIABLES D'ENVIRONNEMENT"
# type: =item
#. type: =item
-#: debhelper.pod:473
+#: debhelper.pod:474
msgid "DH_VERBOSE"
msgstr "DH_VERBOSE"
# type: textblock
#. type: textblock
-#: debhelper.pod:475
+#: debhelper.pod:476
msgid ""
"Set to 1 to enable verbose mode. Debhelper will output every command it runs "
"that modifies files on the build system."
# type: =item
#. type: =item
-#: debhelper.pod:478
+#: debhelper.pod:479
msgid "DH_COMPAT"
msgstr "DH_COMPAT"
# type: textblock
#. type: textblock
-#: debhelper.pod:480
+#: debhelper.pod:481
msgid ""
"Temporarily specifies what compatibility level debhelper should run at, "
"overriding any value in debian/compat."
# type: =item
#. type: =item
-#: debhelper.pod:483
+#: debhelper.pod:484
msgid "DH_NO_ACT"
msgstr "DH_NO_ACT"
# type: textblock
#. type: textblock
-#: debhelper.pod:485
+#: debhelper.pod:486
msgid "Set to 1 to enable no-act mode."
msgstr "Mettre cette variable à 1 pour activer le mode simulation (no-act)."
# type: =item
#. type: =item
-#: debhelper.pod:487
+#: debhelper.pod:488
msgid "DH_OPTIONS"
msgstr "DH_OPTIONS"
# type: textblock
#. type: textblock
-#: debhelper.pod:489
+#: debhelper.pod:490
msgid ""
"Anything in this variable will be prepended to the command line arguments of "
"all debhelper commands. Command-specific options will be ignored by commands "
# type: textblock
#. type: textblock
-#: debhelper.pod:493
+#: debhelper.pod:494
#, fuzzy
msgid ""
"This is useful in some situations, for example, if you need to pass -p to "
# type: =item
#. type: =item
-#: debhelper.pod:498
+#: debhelper.pod:499
msgid "DH_ALWAYS_EXCLUDE"
msgstr "DH_ALWAYS_EXCLUDE"
# type: textblock
#. type: textblock
-#: debhelper.pod:500
+#: debhelper.pod:501
msgid ""
"If set, this adds the value the variable is set to to the -X options of all "
"commands that support the -X option. Moreover, dh_builddeb will rm -rf "
# type: textblock
#. type: textblock
-#: debhelper.pod:504
+#: debhelper.pod:505
msgid ""
"This can be useful if you are doing a build from a CVS source tree, in which "
"case setting DH_ALWAYS_EXCLUDE=CVS will prevent any CVS directories from "
# type: textblock
#. type: textblock
-#: debhelper.pod:511
+#: debhelper.pod:512
msgid ""
"Multiple things to exclude can be separated with colons, as in "
"DH_ALWAYS_EXCLUDE=CVS:.svn"
# type: =head1
#. type: =head1
-#: debhelper.pod:516 dh_builddeb:87 dh_clean:130 dh_compress:190 dh_desktop:27
-#: dh_fixperms:110 dh_gconf:106 dh_gencontrol:79 dh_installcatalogs:109
+#: debhelper.pod:517 dh_builddeb:87 dh_clean:130 dh_compress:190 dh_desktop:27
+#: dh_fixperms:122 dh_gconf:106 dh_gencontrol:79 dh_installcatalogs:109
#: dh_installchangelogs:147 dh_installcron:61 dh_installdebconf:118
#: dh_installdeb:94 dh_installdirs:83 dh_installdocs:223 dh_installemacsen:111
#: dh_installexamples:103 dh_installinfo:103 dh_installinit:224
# type: =item
#. type: =item
-#: debhelper.pod:520
+#: debhelper.pod:521
msgid "F</usr/share/doc/debhelper/examples/>"
msgstr "F</usr/share/doc/debhelper/examples/>"
# type: textblock
#. type: textblock
-#: debhelper.pod:522
+#: debhelper.pod:523
msgid "A set of example debian/rules files that use debhelper."
msgstr ""
"Un ensemble d'exemples de fichiers debian/rules qui utilisent debhelper."
# type: =item
#. type: =item
-#: debhelper.pod:524
+#: debhelper.pod:525
msgid "L<http://kitenet.net/~joey/code/debhelper/>"
msgstr "L<http://kitenet.net/~joey/code/debhelper/>"
# type: textblock
#. type: textblock
-#: debhelper.pod:526
+#: debhelper.pod:527
msgid "Debhelper web site."
msgstr "Le site internet de debhelper."
# type: =head1
#. type: =head1
-#: debhelper.pod:530 dh_builddeb:93 dh_clean:136 dh_compress:196 dh_desktop:33
-#: dh_fixperms:116 dh_gconf:112 dh_gencontrol:85 dh_installcatalogs:115
+#: debhelper.pod:531 dh_builddeb:93 dh_clean:136 dh_compress:196 dh_desktop:33
+#: dh_fixperms:128 dh_gconf:112 dh_gencontrol:85 dh_installcatalogs:115
#: dh_installchangelogs:153 dh_installcron:67 dh_installdebconf:124
#: dh_installdeb:100 dh_installdirs:89 dh_installdocs:229
#: dh_installemacsen:117 dh_installexamples:109 dh_installinfo:109
# type: textblock
#. type: textblock
-#: debhelper.pod:532 dh_builddeb:95 dh_clean:138 dh_compress:198
-#: dh_fixperms:118 dh_gencontrol:87 dh_installchangelogs:155 dh_installcron:69
+#: debhelper.pod:533 dh_builddeb:95 dh_clean:138 dh_compress:198
+#: dh_fixperms:130 dh_gencontrol:87 dh_installchangelogs:155 dh_installcron:69
#: dh_installdebconf:126 dh_installdeb:102 dh_installdirs:91
#: dh_installdocs:231 dh_installemacsen:119 dh_installexamples:111
#: dh_installinfo:111 dh_installinit:232 dh_installlogrotate:58
# type: textblock
#. type: textblock
-#: dh_builddeb:89 dh_clean:132 dh_compress:192 dh_fixperms:112 dh_gconf:108
+#: dh_builddeb:89 dh_clean:132 dh_compress:192 dh_fixperms:124 dh_gconf:108
#: dh_gencontrol:81 dh_installcatalogs:111 dh_installchangelogs:149
#: dh_installcron:63 dh_installdebconf:120 dh_installdeb:96 dh_installdirs:85
#: dh_installdocs:225 dh_installemacsen:113 dh_installexamples:105
# type: textblock
#. type: textblock
-#: dh_builddeb:91 dh_clean:134 dh_compress:194 dh_desktop:31 dh_fixperms:114
+#: dh_builddeb:91 dh_clean:134 dh_compress:194 dh_desktop:31 dh_fixperms:126
#: dh_gconf:110 dh_gencontrol:83 dh_installchangelogs:151 dh_installcron:65
#: dh_installdebconf:122 dh_installdeb:98 dh_installdirs:87 dh_installdocs:227
#: dh_installemacsen:115 dh_installexamples:107 dh_installinfo:107
projects / debhelper.git / commitdiff