package Debian::Debhelper::Buildsystem::autoconf;
-=head1 NAME
-
-B<autoconf> - GNU Autoconf (configure)
-
-=head1 SYNOPSIS
-
-B<dh_auto_*> [B<--buildsystem>=I<autoconf>] ...
-
-=head1 DESCRIPTION
-
-GNU Autoconf is a popular cross-platform build system. Autoconf F<configure>
-script prepares the source for building and generates necessary F<Makefile>s
-and other temporary files in the build directory. Then a standard set of
-make targets needs to be executed in the build directory to complete source
-build process. GNU Autoconf build system can be typically identified by
-presence of the F<configure> script in the source directory.
-
-=head1 DH_AUTO NOTES
-
-Both in source (default) and out of source tree building modes are supported.
-However, please note that some original source packages might not be compatible
-with out of source tree building mode of Autoconf and hence build process may
-fail later even if the I<configure> step succeeds.
-
-=head1 BUILD PROCESS
-
-=cut
-
use strict;
use Debian::Debhelper::Dh_Lib qw(dpkg_architecture_value sourcepackage);
use base 'Debian::Debhelper::Buildsystem::makefile';
return 0;
}
-=head2 Configure step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute F<configure> from the source directory with working directory set to
-the build directory. A set of standard arguments are passed to the F<configure>
-script:
-
- --build=`dpkg_architecture -qDEB_BUILD_GNU_TYPE`
- --prefix=/usr
- --includedir=${prefix}/include
- --mandir=${prefix}/share/man
- --infodir=${prefix}/share/info
- --sysconfdir=/etc
- --localstatedir=/var
- --libexecdir=${prefix}/lib/$name_of_debian_source_package
- --disable-maintainer-mode
- --disable-dependency-tracking
- --host=`dpkg_architecture -qDEB_HOST_GNU_TYPE` (if different from --build)
-
-=item I<Auto-selection>
-
-If executable file F<configure> exists in the source directory.
-
-=back
-
-=cut
sub configure {
my $this=shift;
$this->doit_in_builddir($this->get_source_rel2builddir("configure"), @opts, @_);
}
-=head2 Build step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<make> in the build directory. See I<makefile> build system
-documentation for more information.
-
-=item I<Auto-selection>
-
-It is normal for the I<makefile> build system to be auto-selected at this step.
-
-=back
-
-=head2 Test step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute either C<make test> or C<make check> in the build directory. See
-I<makefile> build system documentation for more information.
-
-=item I<Auto-selection>
-
-It is normal for the I<makefile> build system to be auto-selected at this step.
-
-=back
-
-=head2 Install step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<make install DESTDIR=$destdir> in the build directory with $destdir
-set to the appropriate temporary installation directory. See I<makefile> build
-system documentation for more information.
-
-=item I<Auto-selection>
-
-It is normal for the I<makefile> build system to be auto-selected at this step.
-
-=back
-
-=head2 Clean step
-
-=over 4
-
-=item I<Behaviour>
-
-Remove the build directory if building out of source tree or execute C<make
-distclean> if building in source. See I<makefile> build system documentation
-for more information.
-
-=item I<Auto-selection>
-
-It is normal for the I<makefile> build system to be auto-selected at this step.
-
-=back
-
-=head1 SEE ALSO
-
-L<dh_auto_makefile(7)>
-
-L<dh_auto(7)>
-
-=head1 AUTHORS
-
- Joey Hess <joeyh@debian.org>
- Modestas Vainius <modestas@vainius.eu>
-
-=cut
-
1;
package Debian::Debhelper::Buildsystem::cmake;
-=head1 NAME
-
-B<cmake> - CMake (CMakeLists.txt)
-
-=head1 SYNOPSIS
-
-B<dh_auto_*> [B<--buildsystem>=I<cmake>] ...
-
-=head1 DESCRIPTION
-
-CMake is a family of tools designed to build, test and package software. CMake
-generates F<Makefile>s and other temporary files in the build directory from
-the directives present in the F<CMakeLists.txt> and a couple of other build
-system source files. Then a standard set of make targets needs to be executed
-in the build directory to complete source building process. CMake is available
-in the cmake package that is essential throughout the whole build process.
-
-=head1 DH_AUTO NOTES
-
-Out of source tree building is done by default if this debhelper build system
-is selected. This is due to the fact that there is no way to properly clean up
-build directory from temporary files unless it is removed completely.
-Therefore I<clean> step cannot be fully implemented if building is done in
-source. However, the user may still enable in source building by explicitly
-specifying a build directory path that is equal to the source directory path.
-
-=head1 BUILD PROCESS
-
-=cut
-
use strict;
use base 'Debian::Debhelper::Buildsystem::makefile';
return $this;
}
-=head2 Configure step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<cmake> in the build directory passing a path to the source directory
-and defining the following flags:
-
- -DCMAKE_INSTALL_PREFIX=/usr
- -DCMAKE_SKIP_RPATH=ON
- -DCMAKE_VERBOSE_MAKEFILE=ON
-
-=item I<Auto-selection>
-
-If F<CMakeLists.txt> file exists but neither F<configure>, F<Makefile.PL>,
-F<setup.py> or F<Build.PL> exist in the source directory.
-
-=back
-
-=cut
sub configure {
my $this=shift;
my @flags;
$this->doit_in_builddir("cmake", $this->get_source_rel2builddir(), @flags);
}
-=head2 Build step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<make> in the build directory. See I<makefile> build system documentation
-for more information.
-
-=item I<Auto-selection>
-
-It is normal for the I<makefile> build system to be auto-selected at this step.
-
-=back
-
-=head2 Test step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<make test> in the build directory. See I<makefile> build system
-documentation for more information.
-
-=item I<Auto-selection>
-
-It is normal for the I<makefile> build system to be auto-selected at this step.
-
-=back
-
-=head2 Install step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<make install DESTDIR=$destdir> in the build directory with $destdir
-set to the appropriate temporary installation directory. See I<makefile> build
-system documentation for more information.
-
-=item I<Auto-selection>
-
-It is normal for the I<makefile> build system to be auto-selected at this step.
-
-=back
-
-=head2 Clean step
-
-=over 4
-
-=item I<Behaviour>
-
-Remove the build directory if building out of source tree (complete clean up)
-or execute C<make clean> if building in source (incomplete clean up). See
-I<makefile> build system documentation for more information.
-
-=item I<Auto-selection>
-
-It is normal for the I<makefile> build system to be auto-selected at this step.
-
-=back
-
-=head1 SEE ALSO
-
-L<dh_auto_makefile(7)>
-
-L<dh_auto(7)>
-
-=head1 AUTHORS
-
- Modestas Vainius <modestas@vainius.eu>
-
-=cut
-
1;
package Debian::Debhelper::Buildsystem::makefile;
-=head1 NAME
-
-B<makefile> - make (Makefile)
-
-=head1 SYNOPSIS
-
-B<dh_auto_*> [B<--buildsystem>=I<makefile>] ...
-
-=head1 DESCRIPTION
-
-Makefile based projects use C<make> to control build process. C<make> utility
-is the most popular tool on *NIX for building & installing packages from
-source. It is also a basis for most other popular build systems. For example,
-GNU Autoconf (autoconf) or CMake (cmake) generate F<Makefile>s during I<configure>
-step and leave the rest of build process for C<make> to handle.
-
-=head1 DH_AUTO NOTES
-
-Since C<make> itself does not strictly define standard target names, a couple
-of the most popular targets are tried for each building step. Whichever first
-of them is discovered to exist, it is run. If neither of the tried targets
-exist in the actual, the building step is assumed to have completed
-successfully. However, if executed C<make> target fails, the respective dh_auto
-program will fail too.
-
-If MAKE environment variable is set, its value is executed rather than default
-C<make> command.
-
-Both in source (default) and out of source tree building modes are supported.
-Either F<Makefile>, F<makefile> or F<GNUmakefile> file should be present in the
-build directory for this debhelper build system to work.
-
-=head1 BUILD PROCESS
-
-=head2 Configure step
-
-=over 4
-
-=item I<Behaviour>
-
-Do nothing (auto-selection continues).
-
-=item I<Auto-selection>
-
-It will never be auto-selected at this step.
-
-=back
-
-=cut
-
use strict;
use Debian::Debhelper::Dh_Lib qw(escape_shell);
use base 'Debian::Debhelper::Buildsystem';
return 0;
}
-=head2 Build step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<make> (without arguments) with working directory changed to the build
-directory.
-
-=item I<Auto-selection>
-
-If either F<Makefile>, F<makefile> or F<GNUmakefile> exists in the build
-directory, but F<Makefile.PL> does not exist in the source directory.
-
-=back
-
-=cut
sub build {
my $this=shift;
$this->doit_in_builddir($this->{makecmd}, @_);
}
-=head2 Test step
-
-=over 4
-
-=item I<Behaviour>
-
-Try to C<make> either I<test> or I<check> target (the first existing one) with
-working directory changed to the build directory.
-
-=item I<Auto-selection>
-
-If either F<Makefile>, F<makefile> or F<GNUmakefile> exists in the build
-directory, but F<Makefile.PL> does not exist in the source directory.
-
-=back
-
-=cut
sub test {
my $this=shift;
$this->make_first_existing_target(['test', 'check'], @_);
}
-=head2 Install step
-
-=over 4
-
-=item I<Behaviour>
-
-Try to run C<make install DESTDIR=$destdir> with working directory changed to
-the build directory. $desdir is the path to the appropriate temporary
-installation directory under debian/ (see L<dh_auto_install(1)>).
-
-=item I<Auto-selection>
-
-If either F<Makefile>, F<makefile> or F<GNUmakefile> exists in the build
-directory, but F<Makefile.PL> does not exist in the source directory.
-
-=back
-
-=cut
sub install {
my $this=shift;
my $destdir=shift;
$this->make_first_existing_target(['install'], "DESTDIR=$destdir", @_);
}
-=head2 Clean step
-
-=over 4
-
-=item I<Behaviour>
-
-When building in source, try to C<make> either I<distclean>, I<realclean> or
-I<clean> target (the first existing one) in the source directory. When building
-out of source tree, recursively remove the whole build directory.
-
-=item I<Auto-selection>
-
-If either F<Makefile>, F<makefile> or F<GNUmakefile> exists in the build
-directory, but F<Makefile.PL> does not exist in the source directory.
-
-=back
-
-=cut
sub clean {
my $this=shift;
if (!$this->rmdir_builddir()) {
}
}
-=head1 SEE ALSO
-
-L<dh_auto(7)>
-
-=head1 AUTHORS
-
- Joey Hess <joeyh@debian.org>
- Modestas Vainius <modestas@vainius.eu>
-
-=cut
-
1;
package Debian::Debhelper::Buildsystem::perl_build;
-=head1 NAME
-
-B<perl_build> - Perl Module::Build (Build.PL)
-
-=head1 SYNOPSIS
-
-B<dh_auto_*> [B<--buildsystem>=I<perl_build>] ...
-
-=head1 DESCRIPTION
-
-Module::Build is a system for building, testing, and installing Perl modules.
-It does not require a C<make> on your system - most of the Module::Build code is
-pure-perl and written in a very cross-platform way. Its only prerequisites are
-modules that are included with perl 5.6.0. Typically, Module::Build build system
-can be identified by presence of the F<Build.PL> script in the source
-directory.
-
-=head1 DH_AUTO NOTES
-
-Out of source tree building is not supported. C<MODULEBUILDRC=/dev/null>
-environment variable is exported in each building step.
-
-=head1 BUILD PROCESS
-
-=cut
-
use strict;
use base 'Debian::Debhelper::Buildsystem';
return $this;
}
-=head2 Configure step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<perl Build.PL> passing C<installdirs=vendor> parameter by default.
-Environment variable C<PERL_MM_USE_DEFAULT> is set before running the script.
-
-=item I<Auto-selection>
-
-If F<configure>, F<Makefile.PL>, F<setup.py> do not exist, but F<Build.PL>
-exists in the source directory.
-
-=back
-
-=cut
sub configure {
my $this=shift;
$ENV{PERL_MM_USE_DEFAULT}=1;
$this->do_perl("Build.PL", "installdirs=vendor", @_);
}
-=head2 Build step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<perl Build>.
-
-=item I<Auto-selection>
-
-If F<Makefile>, F<makefile>, F<GNUmakefile> (build directory) and F<setup.py>
-(source directory) do not exist, but F<Build.PL> and F<Build> files exist in
-the source directory.
-
-=back
-
-=cut
sub build {
my $this=shift;
$this->do_perl("Build", @_);
}
-=head2 Test step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<perl Build test>.
-
-=item I<Auto-selection>
-
-If F<Makefile>, F<makefile>, F<GNUmakefile> (build directory) and F<setup.py>
-(source directory) do not exist, but F<Build.PL> and F<Build> files exist in
-the source directory.
-
-=back
-
-=cut
sub test {
my $this=shift;
$this->do_perl("Build", "test", @_);
}
-=head2 Install step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<perl Build install destdir=$destdir create_packlist=0>. $destdir is
-the path to the temporary installation directory (see L<dh_auto_install(1)>).
-
-=item I<Auto-selection>
-
-If F<Makefile>, F<makefile>, F<GNUmakefile> (build directory) and F<setup.py>
-(source directory) do not exist, but F<Build.PL> and F<Build> files exist in
-the source directory.
-
-=back
-
-=cut
sub install {
my $this=shift;
my $destdir=shift;
$this->do_perl("Build", "install", "destdir=$destdir", "create_packlist=0", @_);
}
-=head2 Clean step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<perl Build --allow_mb_mismatch 1 distclean>.
-
-=item I<Auto-selection>
-
-If F<Makefile>, F<makefile>, F<GNUmakefile> (build directory) and F<setup.py>
-(source directory) do not exist, but F<Build.PL> and F<Build> files exist in
-the source directory.
-
-=back
-
-=cut
sub clean {
my $this=shift;
$this->do_perl("Build", "--allow_mb_mismatch", 1, "distclean", @_);
}
-=head1 SEE ALSO
-
-L<dh_auto(7)>
-
-=head1 AUTHORS
-
- Joey Hess <joeyh@debian.org>
- Modestas Vainius <modestas@vainius.eu>
-
-=cut
-
1;
package Debian::Debhelper::Buildsystem::perl_makemaker;
-=head1 NAME
-
-B<perl_makemaker> - Perl ExtUtils::MakeMaker (Makefile.PL)
-
-=head1 SYNOPSIS
-
-B<dh_auto_*> [B<--buildsystem>=I<perl_makemaker>] ...
-
-=head1 DESCRIPTION
-
-Perl ExtUtils::MakeMaker utility is designed to write a Makefile for an
-extension module from a Makefile.PL (at configure step). The rest of build
-process is handled by C<make>. Typically, ExtUtils::MakeMaker build system can
-be identified by presence of the F<Makefile.PL> script in the source directory.
-
-=head1 DH_AUTO NOTES
-
-Out of source tree building is not supported.
-
-=head1 BUILD PROCESS
-
-=cut
-
use strict;
use base 'Debian::Debhelper::Buildsystem::makefile';
return $this;
}
-=head2 Configure step
-
-=over
-
-=item I<Behaviour>
-
-Execute C<Makefile.PL> script passing C<INSTALLDIRS=vendor> and
-C<create_packlist=0> parameters. Environment variables C<PERL_MM_USE_DEFAULT=1>
-and C<PERL_AUTOINSTALL=--skipdeps> are exported before running the script.
-
-=item I<Auto-selection>
-
-If F<Makefile.PL> file exists but F<configure> does not exist in the source
-directory.
-
-=back
-
-=cut
sub configure {
my $this=shift;
# If set to a true value then MakeMaker's prompt function will
@_);
}
-=head2 Build step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<make> in the build directory. See I<makefile> build system
-documentation for more information.
-
-=item I<Auto-selection>
-
-Both F<Makefile.PL> and F<Makefile> exist in the source directory.
-
-=back
-
-=head2 Test step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<make test> in the source directory. See I<makefile> build system
-documentation for more information.
-
-=item I<Auto-selection>
-
-Both F<Makefile.PL> and F<Makefile> exist in the source directory.
-
-=back
-
-=cut
-
-=head2 Install step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<make install DESTDIR=$destdir PREFIX=/usr> in the source directory
-with $destdir set to the appropriate temporary installation directory. See
-I<makefile> build system documentation for more information.
-
-=item I<Auto-selection>
-
-Both F<Makefile.PL> and F<Makefile> exist in the source directory.
-
-=back
-
-=cut
sub install {
my $this=shift;
my $destdir=shift;
$this->SUPER::install($destdir, "PREFIX=/usr", @_);
}
-=head2 Clean step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<make distclean> in the source directory. See I<makefile> build system
-documentation for more information.
-
-=item I<Auto-selection>
-
-Both F<Makefile.PL> and F<Makefile> exist in the source directory.
-
-=back
-
-=head1 SEE ALSO
-
-L<dh_auto_makefile(7)>
-
-L<dh_auto(7)>
-
-=head1 AUTHORS
-
- Joey Hess <joeyh@debian.org>
- Modestas Vainius <modestas@vainius.eu>
-
-=cut
-
1;
package Debian::Debhelper::Buildsystem::python_distutils;
-=head1 NAME
-
-B<python_distutils> - Python Distutils (setup.py)
-
-=head1 SYNOPSIS
-
-B<dh_auto_*> [B<--buildsystem>=I<python_distutils>] ...
-
-=head1 DESCRIPTION
-
-Python Distribution Utilities (Distutils for short) is a standard Python build
-system. It is used to package most of the Python modules in the source
-distribution form. Typically, only two steps (build and install) are needed to
-finish installation of the Distutils based Python module. This build system can
-be typically identified by presence of the F<setup.py> in the source directory.
-
-=head1 DH_AUTO NOTES
-
-Out of source tree building is done by default but in source building is also
-supported. PLEASE NOTE that B<default build directory> is B<$srcdir/build>
-where $srcdir is a path to the source directory.
-
-Due to design flaws of Distutils, it is not possible to set a B<custom> build
-directory via command line arguments to F<setup.py>. Therefore, the same effect
-is achieved by writing appropriate F<.pydistutils.cfg> file to the build
-directory and pointing $HOME environment variable to the build directory.
-
-=head1 BUILD PROCESS
-
-=cut
-
use strict;
use Cwd ();
use Debian::Debhelper::Dh_Lib qw(error);
$this->doit_in_sourcedir("python", "setup.py", $act, @_);
}
-=head2 Configure step
-
-=over 4
-
-=item I<Behaviour>
-
-Do nothing but stop auto-selection process.
-
-=item I<Auto-selection>
-
-If neither F<configure>, F<Makefile.PL> exist, but F<setup.py> exists in the
-source directory.
-
-=back
-
-=cut
-
-=head2 Build step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<python setup.py build>.
-
-=item I<Auto-selection>
-
-If F<Makefile>, F<makefile> F<GNUmakefile> do not exist in the build directory
-and F<setup.py> file exists in the source directory.
-
-=back
-
-=cut
sub build {
my $this=shift;
$this->setup_py("build", @_);
}
-=head2 Test step
-
-=over 4
-
-=item I<Behaviour>
-
-Do nothing but stop auto-selection process.
-
-=item I<Auto-selection>
-
-F<Makefile>, F<makefile>, F<GNUmakefile> do not exist in the build directory and
-F<setup.py> file exists in the source directory.
-
-=back
-
-=cut
-
-=head2 Install step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<python setup.py install> passing temporary installation directory via
-C<--root> parameter. C<--no-compile> and C<-O0> parameters are also passed by
-default. See L<dh_auto_install(1)> for more information.
-
-=item I<Auto-selection>
-
-F<Makefile>, F<makefile>, F<GNUmakefile> do not exist in the build directory and
-F<setup.py> file exists in the source directory.
-
-=back
-
-=cut
sub install {
my $this=shift;
my $destdir=shift;
$this->setup_py("install", "--root=$destdir", "--no-compile", "-O0", @_);
}
-=head2 Clean step
-
-=over 4
-
-=item I<Behaviour>
-
-Execute C<python setup.py clean -a>. Additional parameters (if specified) are
-passed to the latter command. F<.pydistutils.cfg> is also removed if it was
-created (together with the build directory if it is ends up empty). Finally,
-recursively find and delete all *.pyc files from the source directory.
-
-=item I<Auto-selection>
-
-F<Makefile>, F<makefile>, F<GNUmakefile> do not exist in the build directory and
-F<setup.py> file exists in the source directory.
-
-=back
-
-=cut
sub clean {
my $this=shift;
$this->setup_py("clean", "-a", @_);
$this->doit_in_sourcedir('find', '.', '-name', '*.pyc', '-exec', 'rm', '{}', ';');
}
-=head1 SEE ALSO
-
-L<dh_auto(7)>
-
-=head1 AUTHORS
-
- Joey Hess <joeyh@debian.org>
- Modestas Vainius <modestas@vainius.eu>
-
-=cut
-
1;
+++ /dev/null
-=head1 NAME
-
-dh_auto - debhelper based package source building suite
-
-=head1 SYNOPTIS
-
-B<dh_auto_*> [B<--buildsystem=>I<buildsystem>] [B<--sourcedirectory=>I<srcdir>] [B<--builddirectory>[=I<builddir>]]
-
-B<dh_auto_*> B<--list> [B<-S>I<buildsystem>] [B<-D>I<srcdir>] [B<-B>[I<builddir>]]
-
-B<dh_auto_*> B<--help-buildsystem> [B<-S>I<buildsystem>] [B<-D>I<srcdir>] [B<-B>[I<builddir>]]
-
-=head1 DESCRIPTION
-
-dh_auto is a family of debhelper programs that are responsible for managing
-build process of the package sources. dh_auto takes a burden of identifying and
-configuring package build system with a standard set of options that a typical
-Debian package needs. However, it is also flexible enough to allow
-customization of the build process in various ways. Due to good defaults, it
-should be able to handle 90% of packages even without any additional arguments
-passed to the dh_auto programs. Therefore, dh_auto is one of the main driving
-forces behind the L<dh(1)> command sequencer. Similarly, dh_auto programs can
-be easily (either fully or partially) integrated into traditional Debian
-packaging.
-
-One of the key dh_auto features is that it wraps around all common source build
-systems and exposes their common features via well-defined command line
-interface of the dh_auto programs. dh_auto is designed that each type of source
-build system is handled by its corresponding I<debhelper build system> which
-translates dh_auto options into the source build system specific details.
-Therefore, dh_auto is capable to handle e.g. out of source tree building
-transparently.
-
-The build process is split into 5 I<building steps>: configure, build, test,
-install and clean. Each step is managed by the respective dh_auto_$step
-program. Each program accepts a set of shared dh_auto options, step specific
-options (if any) and arbitrary number of extra arguments which are additionally
-passed to the underlying build system command being executed. Whatever is
-executed under the hood depends on the selected debhelper build system,
-building step (i.e. dh_auto program) and dh_auto options in effect.
-
-=head1 DH_AUTO PROGRAMS
-
-=over 2
-
-#DH_AUTO LIST#
-
-=back
-
-=head1 FEATURES
-
-=over 2
-
-=item I<Build system auto-selection>
-
-dh_auto examines package source and/or build directories at each building step
-looking for typical indications of the source build systems it supports. If the
-build system is recognized, its corresponding building step commands are
-executed. If more than one debhelper build system indicates to match the source
-build system, only the first one is selected. If the build system isn't
-recognized, dh_auto program silently succeeds. dh_auto programs may fail only
-if wrong debhelper build system gets selected and/or source build system
-commands fail or cannot be executed.
-
-The auto-selection process implies that a different but compatible debhelper
-build system may be auto-selected at each building step. For example, GNU
-Autoconf is just a configure layer on top of the simple Makefile build system.
-
-=item I<Manual build system selection>
-
-In addition to the build system auto-selection, dh_auto offers a way for a user
-to specify which debhelper build system to assume for the package. In such a
-case, auto-selection is skipped entirely and no prior checks are made before
-executing commands of the specified build system. Obviously, if a wrong build
-system was specified and/or source build system commands failed or could not be
-executed, the dh_auto program would fail too.
-
-Manual build system selection could be useful if package sources came with more
-than one build system, auto-selection fails/gives wrong results due its
-limitations or you want to use a third party debhelper build system (provided
-by an external package (see below)).
-
-=item I<Source tree switching>
-
-Typically, the top directory of the package sources is where the debianization
-directory (debian/) lives. However, sometimes the whole original source tree
-might be somewhere in the subdirectory or a single Debian source package might
-actually contain multiple original source packages with their contents being in
-the separate subdirectories. dh_auto handles such cases by letting the user to
-specify a path to the source directory. All dh_auto programs regardless of the
-build system selected support source directory switching.
-
-=item I<Out of source tree building>
-
-Throughout the build process of the most packages, lots of temporary files are
-generated by their source build systems. Since they are of no use when binary
-packages are built, it is a task of L<dh_auto_clean(1)> to clean them up. If
-temporary files are generated in the same directories where source files are,
-it is referred as "in source building" in this documentation. However, some
-build systems support the concept of "out of source tree" building when all
-temporary files are generated in the arbitrary build directory avoiding
-extensive pollution of the source tree. dh_auto allows to specify a path to the
-build directory and then it will do out of source tree building in it if the
-source build system supports this feature.
-
-In source building is a default mode and it is supported by most debhelper
-build systems. However, some source build systems do not support in source
-building or highly recommend out of source tree building. In this case, dh_auto
-follows the recommendation and might default to the out of source tree building
-even if the build directory was not explicitly specified. However, if the build
-system does not support out of source tree building, it is an error to specify
-the build directory.
-
-=item I<Third party debhelper build systems>
-
-It is very easy to write a third party debhelper build system class and ship it
-in the external package. The only limitation is that support for it can only be
-enabled manually (via "Manual build system selection"). Their auto-selection is
-not allowed in order to keep the process stable under various system
-configurations (i.e. when different sets of third party debhelper build systems
-are installed). However, the user can always discover all standard and third
-party debhelper build systems supported on the system by passing the L<--list>
-option to any dh_auto program.
-
-=back
-
-Read section L</"DH_AUTO SHARED OPTIONS"> for more details how to enable the
-features listed above.
-
-=head1 SUPPORTED BUILD SYSTEMS
-
-dh_auto provides support for the most popular build systems out of the box
-(listed below). See section L</"DEBHELPER BUILD SYSTEM DETAILS"> for more
-information how each build system is auto-selected and what commands are
-executed to complete each building step. To get information about a third party
-debhelper build system installed on your system, use I<--help-buildsystem>
-option.
-
-#SUPPORTED BUILD SYSTEMS#
-
-=head1 #SUPPORTED BUILD SYSTEMS INTRO FOR DH_AUTO PROGRAMS
-
-Below you will find a list of the debhelper build systems that are shipped with
-debhelper itself along with their details concerning this building step. They
-are listed in the order of auto-selection preference. Consult
-L<dh_auto_$buildsystem(7)> or L</"DEBHELPER BUILD SYSTEM DETAILS"> section of
-L<dh_auto(7)>, or use L<--help--buildsystem> option for a more complete
-reference about each build system.
-
-=head1 DH_AUTO SHARED OPTIONS
-
-=over 4
-
-=item B<--buildsystem=>I<buildsystem>, B<-S>I<buildsystem>
-
-Select the specified debhelper I<buildsystem> instead of trying to auto-select
-one which might be applicable for the package. I<buildsystem> specific commands
-will be executed to complete a building step without any prior checks. This
-option is also the only way to select a third party debhelper build system.
-
-=item B<--sourcedirectory>=I<directory>, B<-D>I<directory>
-
-Assume that the original package source tree is at the specified I<directory>
-rather than the top level directory of the Debian source package tree (C<.>).
-I<directory> path is assumed to be relative to the top level directory (where
-debian/ is) and must exist.
-
-=item B<--builddirectory>=[I<directory>], B<-B>[I<directory>]
-
-Enable out of source building and use the specified I<directory> as the build
-directory. If specified, I<directory> must be relative to the top level
-directory of the Debian source package tree and generally does not need to
-exist before the build process is started. If I<directory> parameter is
-omitted, default build directory will be used. It is S<C<obj-`dpkg_architecture
--qDEB_BUILD_GNU_TYPE`>> by default but any debhelper build system can choose
-another value (see documentation of the debhelper build systems).
-
-If this option is not specified, building will be done in source by default
-unless the selected build system enforces/prefers out of source tree building.
-In such a case, the default build directory will be used even if
-L<--builddirectory> is not specified. If the selected build system just prefers
-out of source tree building but still allows in source building, the latter can
-be re-enabled by passing a build directory path that is equal to the source
-directory path.
-
-=item B<--list>, B<-l>
-
-List all debhelper build systems available on this system and exit. The list
-includes both standard (listed first in the auto-selection order) and third
-party build systems (clearly marked as such). The list is concluded with the
-information about which build system would be auto-selected to complete the
-building step or which one is manually specified with the I<--buildsystem>
-option.
-
-=item B<--help-buildsystem>
-
-Print detailed help about a build system which would be auto-selected or which
-is manually specified with the L<--buildsystem> option. Exit immediately
-afterwards.
-
-=back
-
-=head1 DEBHELPER BUILD SYSTEM DETAILS
-
-This section provides more information about debhelper build systems supported
-by default. They are listed in the order of auto-selection preference. The
-first build system that matches auto-selection criteria is always selected and
-the following ones are not even considered. Auto-selection conditions might
-differ at each building step even for the same debhelper build system.
-
-#BUILD SYSTEM DETAILS#
-
-=head1 SEE ALSO
-
-L<debhelper(7)>
-
-=over 2
-
-=item B<Standard debhelper build systems>
-
-#BUILD SYSTEM MAN LIST#
-
-=back
-
-=head1 AUTHORS
-
- Joey Hess <joeyh@debian.org>
- Modestas Vainius <modestas@vainius.eu>
=head1 NAME
-dh_auto_build - build package sources
+dh_auto_build - automatically builds a package
=cut
=head1 SYNOPSIS
-B<dh_auto_build> [S<I<debhelper options>>] [S<
I<dh_auto options>>] [S<B<--> I<params>>]
+B<dh_auto_build> [S<I<debhelper options>>] [S<B<--> I<params>>]
=head1 DESCRIPTION
-dh_auto_build is a debhelper program that is responsible for the I<build> step
-of the L<dh_auto(7)> building process. Typically, this is the point when
-package sources are compiled into binaries or otherwise transformed into ready
-to use format. Files produced throughout this step are put to the build
-directory.
+dh_auto_build is a debhelper program that tries to automatically
+build a package. If a Makefile is found, this is done by running make (or
+MAKE, if the environment variable is set).
+If there's a setup.py, or Build.PL, it is run to build the package.
-You can pass additional parameters via I<params>. However, if dh_auto_build
-does not meet your needs or does not work, it is safe to skip/override it
-entirely and build the package with custom commands.
-
-#DH_AUTO SHARED OPTIONS#
+This is intended to work for about 90% of packages. If it doesn't work,
+you're encouraged to skip using dh_auto_build at all, and just run the
+build process manually.
=head1 OPTIONS
=back
-=head1 SUPPORTED BUILD SYSTEMS
-
-#SUPPORTED BUILD SYSTEMS INTRO#
-#SUPPORTED BUILD SYSTEMS LIST#
-
=cut
buildsystems_init();
=head1 SEE ALSO
-L<dh_auto(7)>
-
L<debhelper(7)>
-This program is a part of debhelper and its dh_auto package source building
-suite.
+This program is a part of debhelper.
=head1 AUTHOR
- Joey Hess <joeyh@debian.org>
- Modestas Vainius <modestas@vainius.eu>
+Joey Hess <joeyh@debian.org>
=cut
=head1 NAME
-dh_auto_clean - clean temporary files after building package sources
+dh_auto_clean - automatically cleans up after a build
=cut
=head1 SYNOPSIS
-B<dh_auto_clean> [S<I<debhelper options>>] [S<
I<dh_auto options>>] [S<B<--> I<params>>]
+B<dh_auto_clean> [S<I<debhelper options>>] [S<B<--> I<params>>]
=head1 DESCRIPTION
-dh_auto_clean is a debhelper program that is responsible for the I<clean> step
-of the L<dh_auto(7)> building process. It tries to automatically clean up after
-a package build by removing all temporary files from the build directory or
-even the build directory itself as appropriate. dh_auto_clean will fail only if
-the source build system clean routine fails. However, if the latter does not
-exist or there is nothing to clean it will exit with zero status doing nothing.
+dh_auto_clean is a debhelper program that tries to automatically clean up
+after a package build. If there's a Makefile and it contains a "distclean",
+"realclean", or "clean" target, then this is done by running make (or MAKE,
+if the environment variable is set). If there is a setup.py or Build.PL, it
+is run to clean the package.
-If dh_auto_clean does not meet your needs or does not work, it is safe to
-skip/override it entirely and just run clean up manually.
-
-#DH_AUTO SHARED OPTIONS#
+This is intended to work for about 90% of packages. If it doesn't work, or
+tries to use the wrong clean target, you're encouraged to skip using
+dh_auto_clean at all, and just run make clean manually.
=head1 OPTIONS
=back
-=head1 SUPPORTED BUILD SYSTEMS
-
-#SUPPORTED BUILD SYSTEMS INTRO#
-#SUPPORTED BUILD SYSTEMS LIST#
-
=cut
buildsystems_init();
=head1 SEE ALSO
-L<dh_auto(7)>
-
L<debhelper(7)>
-This program is a part of debhelper and its dh_auto package source building suite.
+This program is a part of debhelper.
-=head1 AUTHORS
+=head1 AUTHOR
- Joey Hess <joeyh@debian.org>
- Modestas Vainius <modestas@vainius.eu>
+Joey Hess <joeyh@debian.org>
=cut
=head1 NAME
-dh_auto_configure - configure and prepare package sources for building
+dh_auto_configure - automatically configure a package prior to building
=cut
=head1 SYNOPSIS
-B<dh_auto_configure> [S<I<debhelper options>>] [S<
I<dh_auto options>>] [S<B<--> I<params>>]
+B<dh_auto_configure> [S<I<debhelper options>>] [S<B<--> I<params>>]
=head1 DESCRIPTION
-dh_auto_configure is a debhelper program that is responsible for the
-I<configure> step of the L<dh_auto(7)> building process. Since I<configure> is
-the first step, typically it is the point when build configuration options
-are set, system settings are detected and various build system specific
-temporary files are pre-generated in the build directory. Some simpler build
-systems do not need this step. In such a case, dh_auto_configure silently
-succeeds without doing anything.
+dh_auto_configure is a debhelper program that tries to automatically
+configure a package prior to building. It looks for and runs a ./configure
+script, Makefile.PL, Build.PL, or cmake. A standard set of parameters is
+determined and passed to the program that is run. If no program to run is
+found, dh_auto_configure will exit without doing anything.
-dh_auto_configure usually pre-configures the source build system with a set of
-standard options which most Debian packages need to set anyway. Custom options
-can be passed as I<params>. If dh_auto_configure does not meet your needs or
-does not work, it is safe to skip/override it entirely and just run a configure
-script or its equivalent manually.
-
-#DH_AUTO SHARED OPTIONS#
+This is intended to work for about 90% of packages. If it doesn't work,
+you're encouraged to skip using dh_auto_configure at all, and just run
+./configure or its equivalent manually.
=head1 OPTIONS
=item B<--> I<params>
-Pass I<params> to the command that is run, after the standard
+Pass "params" to the program that is run, after the standard
parameters that dh_auto_configure passes. This can be used to supplement
or override those parameters. For example:
=back
-=head1 SUPPORTED BUILD SYSTEMS
-
-#SUPPORTED BUILD SYSTEMS INTRO#
-#SUPPORTED BUILD SYSTEMS LIST#
-
=cut
buildsystems_init();
=head1 SEE ALSO
-L<dh_auto(7)>
-
L<debhelper(7)>
-This program is a part of debhelper and its dh_auto package source building
-suite.
+This program is a part of debhelper.
-=head1 AUTHORS
+=head1 AUTHOR
- Joey Hess <joeyh@debian.org>
- Modestas Vainius <modestas@vainius.eu>
+Joey Hess <joeyh@debian.org>
=cut
=head1 NAME
-dh_auto_install - install built files into the temporary directory under debian/
+dh_auto_install - automatically runs make install or similar
=cut
=head1 SYNOPSIS
-B<dh_auto_install> [S<I<debhelper options>>] [S<
I<dh_auto options>>] [S<B<--> I<params>>]
+B<dh_auto_install> [S<I<debhelper options>>] [S<B<--> I<params>>]
=head1 DESCRIPTION
-dh_auto_install is a debhelper program that is responsible for the I<install>
-step of the L<dh_auto(7)> building process. dh_auto_install tries to run
-original package installation routine to install built files into the proper
-places of the file system hierarchy recreated under the (temporary) directory
-in debian/.
+dh_auto_install is a debhelper program that tries to automatically install
+built files. If there's a Makefile and it contains a "install" target,
+then this is done by running make (or MAKE, if the environment variable is
+set). If there is a setup.py or Build.PL, it is used.
The files are installed into debian/<package>/ if there is only one binary
package. In the multiple binary package case, the files are instead
appropriate package build directory using L<dh_install(1)> or
L<dh_movefiles(1)>.
-If dh_auto_install does not meet your needs or does not work, it is safe to
-skip/override it entirely and just run C<make install> or the like manually.
+DESTDIR is used to tell make where to install the files.
+If the Makefile was generated by MakeMaker from a Makefile.PL, it will
+automatically set PREFIX=/usr too, since such Makefiles need that.
-#DH_AUTO SHARED OPTIONS#
+This is intended to work for about 90% of packages. If it doesn't work, or
+tries to use the wrong install target, you're encouraged to skip using
+dh_auto_install at all, and just run make install manually.
=head1 OPTIONS
=back
-=head1 SUPPORTED BUILD SYSTEMS
-
-#SUPPORTED BUILD SYSTEMS INTRO#
-#SUPPORTED BUILD SYSTEMS LIST#
-
=cut
buildsystems_init();
=head1 SEE ALSO
-L<dh_auto(7)>
-
L<debhelper(7)>
-This program is a part of debhelper and its dh_auto package source building
-suite.
+This program is a part of debhelper.
-=head1 AUTHORS
+=head1 AUTHOR
- Joey Hess <joeyh@debian.org>
- Modestas Vainius <modestas@vainius.eu>
+Joey Hess <joeyh@debian.org>
=cut
=head1 NAME
-dh_auto_test - run package test suites after building
+dh_auto_test - automatically runs a package's test suites
=cut
=head1 SYNOPSIS
-B<dh_auto_test> [S<I<debhelper options>>] [S<
I<dh_auto options>>] [S<B<--> I<params>>]
+B<dh_auto_test> [S<I<debhelper options>>] [S<B<--> I<params>>]
=head1 DESCRIPTION
-dh_auto_test is a debhelper program that is responsible for the I<test> step of
-the L<dh_auto(7)> building process. Typically, this is the point when package
-test suite is run to check if the sources were built successfully and/or
-binaries provide expected functionality. dh_auto_test will fail if test suite
-fails. However, if there's no test suite, it will exit with zero status
-without doing anything.
+dh_auto_test is a debhelper program that tries to automatically run a
+package's test suite. If there's a Makefile and it contains a "test"
+or "check" target, then this is done by running make (or MAKE, if the
+environment variable is set). If the test suite fails, the command will
+exit nonzero. If there's no test suite, it will exit zero without doing
+anything.
-If dh_auto_test does not meet your needs or does not work, it is safe to
-skip/override it entirely and just run the test suite manually.
-
-=head1 NOTES
-
-If the DEB_BUILD_OPTIONS environment variable contains "nocheck", no tests will
-be performed.
-
-#DH_AUTO SHARED OPTIONS#
+This is intended to work for about 90% of packages with a test suite. If it
+doesn't work, you're encouraged to skip using dh_auto_test at all, and
+just run the test suite manually.
=head1 OPTIONS
=back
-=head1 SUPPORTED BUILD SYSTEMS
+=head1 NOTES
-#SUPPORTED BUILD SYSTEMS INTRO#
-#SUPPORTED BUILD SYSTEMS LIST#
+If the DEB_BUILD_OPTIONS environment variable contains "nocheck", no
+tests will be performed.
=cut
=head1 SEE ALSO
-L<dh_auto(7)>
-
L<debhelper(7)>
-This program is a part of debhelper and its dh_auto package source building
-suite.
+This program is a part of debhelper.
-=head1 AUTHORS
+=head1 AUTHOR
- Joey Hess <joeyh@debian.org>
- Modestas Vainius <modestas@vainius.eu>
+Joey Hess <joeyh@debian.org>
=cut
+++ /dev/null
-#!/usr/bin/perl -w
-
-package CommandStrip;
-use base Pod::Parser;
-
-sub command {
- my $parser=shift;
- if (!exists $parser->{_stripped_}) {
- $parser->{_stripped_} = 1;
- return;
- }
- return $parser->SUPER::command(@_);
-}
-
-package main;
-
-use strict;
-use warnings;
-use Debian::Debhelper::Dh_Lib;
-use Debian::Debhelper::Dh_Buildsystems;
-use Pod::Select;
-use IO::String;
-use File::Spec;
-use Pod::InputObjects;
-
-my @buildsystem_pods;
-my $DH_AUTO_POD = "dh_auto.pod";
-
-# Preloads build system PODs
-sub get_buildsystem_pods {
- my $parser = new Pod::Select();
- if (!@buildsystem_pods) {
- my @buildsystems = load_all_buildsystems([ "." ]);
- for my $system (@buildsystems) {
- my $podfile = File::Spec->catfile("Debian/Debhelper/Buildsystem", $system->NAME() . ".pm");
- my $iostr = new IO::String();
-
- open(my $fh, $podfile) or error("Unable to read $podfile");
- $system->{pod_fh} = $fh;
-
- # Extract build system name from POD
- $parser->select('NAME');
- strip_first_command($parser, $fh, $iostr);
-
- # Remove empty lines and join new lines
- $system->{pod_name} = join(" ", grep ! /^\s*$/, split(/\n/, ${$iostr->string_ref()}));
-
- push @buildsystem_pods, $system;
- }
- }
- return @buildsystem_pods;
-}
-
-# Strips the first command (i.e. line starting with =), prints
-# everything else
-sub strip_first_command {
- my ($parser, $input_fh, $output_fh)=@_;
-
- my $iostr = new IO::String();
- seek(\*$input_fh, 0, 0);
- $parser->parse_from_filehandle($input_fh, $iostr);
- $iostr->pos(0);
- CommandStrip->new()->parse_from_filehandle($iostr, $output_fh);
- $iostr->close();
-}
-
-# Prints everything
-sub print_everything {
- my ($parser, $input_fh, $output_fh)=@_;
- seek(\*$input_fh, 0, 0);
- $parser->parse_from_filehandle($input_fh, $output_fh);
-}
-
-# Prints POD paragraph
-# Common parameters -name, -text. Results into =${-name} ${-text}
-sub print_pod_parag {
- my %args=@_;
- my $output_fh = $args{output} || \*STDOUT;
- print $output_fh Pod::Paragraph->new(@_)->raw_text(), "\n\n";
-}
-
-#sub unique_authors {
-# my ($authors, $parser, $fh)=@_;
-# my $iostr = new IO::String();
-
-# $parser->select('AUTHOR[^\s]*');
-# seek(\*$fh, 0, 0);
-# strip_first_command($parser, $fh, $iostr);
-# $iostr->pos(0);
-# while (my $author = <$iostr>) {
-# $author =~ s/\s+/ /g;
-# $author =~ s/^\s+//;
-# $author =~ s/\s+$//;
-# $authors->{$author} = scalar(keys %$authors)
-# if !exists $authors->{$author};
-# }
-# $iostr->close();
-#}
-
-############# Generation of dh_auto_step POD #############
-
-sub get_dh_auto_shared_options_for_step {
- my $step=shift;
- my $parser = new Pod::Select();
- my $iostr = new IO::String();
-
- $parser->select('DH_AUTO SHARED OPTIONS');
- print_everything($parser, \*DH_AUTO, $iostr);
- return ${$iostr->string_ref()};
-}
-
-sub get_supported_buildsystems_intro_for_step {
- my $step=shift;
- my $parser = new Pod::Select();
- my $iostr = new IO::String();
-
- # A common "SUPPORTED BUILD SYSTEMS" dh_auto POD
- $parser->select('#SUPPORTED BUILD SYSTEMS INTRO FOR DH_AUTO PROGRAMS');
- strip_first_command($parser, \*DH_AUTO, $iostr);
- return ${$iostr->string_ref()};
-}
-
-sub get_supported_buildsystems_list_for_step {
- my $step=shift;
- my $parser = new Pod::Select();
- my $iostr = new IO::String();
-
- # Append build system list from build system PODs
- for my $bs (get_buildsystem_pods()) {
- my $bs_fh = $bs->{pod_fh};
-
- # =head2 Build system name
- print_pod_parag(output => $iostr, -name => 'head2', -text => $bs->{pod_name});
-
- # Now print DH_AUTO NOTES
- $parser->select('DH_AUTO NOTES');
- strip_first_command($parser, $bs_fh, $iostr);
-
- # And step specific help follows
- $parser->select('BUILD PROCESS/' . ucfirst($step) . " step");
- strip_first_command($parser, $bs_fh, $iostr);
- }
- return ${$iostr->string_ref()};
-}
-
-sub generate_step_pod {
- my $step=shift;
- $step = $1 if ($step =~ /dh_auto_(.*)$/);
-
- my $dh_auto_step = "dh_auto_$step";
- my $dh_auto_shared_options = get_dh_auto_shared_options_for_step($step);
- my $supported_bs_intro = get_supported_buildsystems_intro_for_step($step);
- my $supported_bs_list = get_supported_buildsystems_list_for_step($step);
- open(DH_AUTO_STEP, "podselect $dh_auto_step |")
- or error("Unable to read $dh_auto_step");
- while (<DH_AUTO_STEP>) {
- s/#DH_AUTO SHARED OPTIONS#/$dh_auto_shared_options/;
- s/#SUPPORTED BUILD SYSTEMS INTRO#/$supported_bs_intro/;
- s/#SUPPORTED BUILD SYSTEMS LIST#/$supported_bs_list/;
- print $_;
- }
- close DH_AUTO_STEP;
-}
-
-############# Generation of dh_auto POD #############
-
-sub get_dh_auto_program_list_for_dh_auto {
- my @steps=@_;
- my $parser = new Pod::Select();
- my $collect = "";
-
- $parser->select('NAME');
- foreach my $step (@steps) {
- my $iostr = new IO::String();
- open (my $fh, "dh_auto_$step") or die "$_: $!";
- strip_first_command($parser, $fh, $iostr);
- close $fh;
- if (${$iostr->string_ref()} =~ /^(.*?) - (.*)/) {
- $collect .= "=item $1(1)\n\n$2\n\n";
- }
- }
- return $collect;
-}
-
-sub get_supported_buildsystems_for_dh_auto {
- my $parser = new Pod::Select();
- my $iostr = new IO::String();
-
- # Build system list from build system PODs (NAME + DESCRIPTION)
- for my $bs (sort { $a->NAME() cmp $b->NAME() } get_buildsystem_pods()) {
- my $bs_fh = $bs->{pod_fh};
-
- # =head2 Build system name
- print_pod_parag(output => $iostr, -name => 'head2', -text => $bs->{pod_name});
-
- $parser->select('DESCRIPTION');
- strip_first_command($parser, $bs_fh, $iostr);
- }
- return ${$iostr->string_ref()};
-}
-
-sub get_buildsystem_details_for_dh_auto {
- my @steps=@_;
- my $parser = new Pod::Select();
- my $iostr = new IO::String();
-
- # Build system details from build system PODs
- for my $bs (get_buildsystem_pods()) {
- my $bs_fh = $bs->{pod_fh};
-
- print_pod_parag(output => $iostr, -name => 'head2', -text => $bs->NAME());
-
- # Now print DH_AUTO NOTES
- $parser->select('DH_AUTO NOTES');
- strip_first_command($parser, $bs_fh, $iostr);
-
- # And step specific documentation
- for my $step (@steps) {
- $parser->select('BUILD PROCESS/' . ucfirst($step) . " step");
- print_pod_parag(output => $iostr, -name => 'head3', -text => 'B<' . ucfirst($step) . " step>");
- strip_first_command($parser, $bs_fh, $iostr);
- }
- }
- return ${$iostr->string_ref()};
-}
-
-sub get_dh_auto_program_man_list_for_dh_auto {
- return join("\n\n", map { "L<dh_auto_$_(1)>" } @_);
-}
-
-sub get_buildsystem_man_list_for_dh_auto {
- return join("\n\n", map { "L<dh_auto_" . $_->NAME() . "(7)>" } get_buildsystem_pods());
-}
-
-sub generate_dh_auto_pod {
- my @steps=@_;
- my $parser = new Pod::Select();
- my $iostr = new IO::String();
-
- my $dh_auto_list = get_dh_auto_program_list_for_dh_auto(@steps);
- my $supported_bs = get_supported_buildsystems_for_dh_auto(@steps);
- my $bs_details = get_buildsystem_details_for_dh_auto(@steps);
- my $dh_auto_man_list = get_dh_auto_program_man_list_for_dh_auto(@steps);
- my $bs_man_list = get_buildsystem_man_list_for_dh_auto();
-
- # Filter out all sections starting with #
- $parser->select('[^#].*');
- print_everything($parser, \*DH_AUTO, $iostr);
-
- seek(\*$iostr, 0, 0);
- while (<$iostr>) {
- s/#DH_AUTO LIST#/$dh_auto_list/;
- s/#SUPPORTED BUILD SYSTEMS#/$supported_bs/;
- s/#BUILD SYSTEM DETAILS#/$bs_details/;
- s/#DH_AUTO MAN LIST#/$dh_auto_man_list/;
- s/#BUILD SYSTEM MAN LIST#/$bs_man_list/;
- print $_;
- }
- $iostr->close();
-}
-
-############# Entry point #############
-
-my @args;
-my $outfile;
-foreach (@ARGV) {
- if (/^-o(.*)/) {
- $outfile = $1;
- }
- else {
- push @args, $_;
- }
-}
-
-if ($outfile) {
- open(OUTFILE, ">", $outfile) or die "Unable to open output file $outfile";
- open(STDOUT, ">&OUTFILE") or die "Unable to redirect standard output";
-}
-
-open(DH_AUTO, $DH_AUTO_POD) or error("Unable to read $DH_AUTO_POD");
-if (@args > 0) {
- generate_step_pod(@args);
-}
-else {
- generate_dh_auto_pod(qw(configure build test install clean));
-}
-close DH_AUTO;
-close OUTFILE if $outfile;
projects / debhelper.git / commitdiff