-debhelper (8.9.7) UNRELEASED; urgency=low
+debhelper (8.9.7) unstable; urgency=low
* dh: Now you can use override_dh_command-arch and override_dh_command-indep
to run different overrides when building arch and indep packages. This
allows for a much simplified form of rules file in this situation, where
build-arch/indep and binary-arch/indep targets do not need to be manually
specified. See man page for examples. Closes: #640965
- * dh: Note that if a rules file has say, override_dh_fixperms-arch,
+ .
+ Note that if a rules file has say, override_dh_fixperms-arch,
but no corresponding override_dh_fixperms-indep, then the unoverridden
dh_fixperms will be run on the indep packages.
- * dh: Note that the old override_dh_command takes precidence over the new
+ .
+ Note that the old override_dh_command takes precidence over the new
overrides, because mixing the two types of overrides would have been
too complicated. In particular, it's difficult to ensure an
old override target will work if it's sometimes constrained to only
acting on half the packages it would normally run on. This would be
a source of subtle bugs, so is avoided.
* dh: Don't bother running dh_shlibdebs, dh_makeshlibs, or dh_strip
- for the binary target when all packages being acted on are indep.
+ in the binary target when all packages being acted on are indep.
+ * dh: Avoid running install sequence a third time in v9 when the
+ rules file has explicit binary-indep and binary-arch targets.
+ Closes: #639341 Thanks, Yann Dirson for test case.
* debhelper no longer build-depends on man-db or file, to ease bootstrapping.
* Remove obsolete versioned dependency on perl-base.
* Avoid writing debhelper log files in no-act mode. Closes: #640586
* Tighten parsing of DEB_BUILD_OPTIONS.
- * dh: Avoid running install sequence a third time in v9 when the
- rules file has explicit binary-indep and binary-arch targets.
- Closes: #639341 Thanks, Yann Dirson for test case.
- -- Joey Hess <joeyh@debian.org> Mon, 29 Aug 2011 20:18:01 -0400
+ -- Joey Hess <joeyh@debian.org> Sun, 11 Sep 2011 20:29:22 -0400
debhelper (8.9.6) unstable; urgency=low
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2011-09-10 18:35-0400\n"
+"POT-Creation-Date: 2011-09-11 21:40-0400\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
msgstr ""
#. type: =item
-#: debhelper.pod:101 dh:56
+#: debhelper.pod:101 dh:64
msgid "B<--no-act>"
msgstr ""
msgstr ""
#. type: =item
-#: debhelper.pod:244 dh:52
+#: debhelper.pod:244 dh:60
msgid "B<--list>, B<-l>"
msgstr ""
msgstr ""
#. type: =head1
-#: debhelper.pod:642 dh:858 dh_auto_build:47 dh_auto_clean:50 dh_auto_configure:53 dh_auto_install:85 dh_auto_test:59 dh_bugfiles:122 dh_builddeb:120 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129 dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279 dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77 dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86 dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106 dh_installifupdown:69 dh_installinfo:77 dh_installinit:275 dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:259 dh_installmanpages:197 dh_installmenu:87 dh_installmime:95 dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115 dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57 dh_listpackages:30 dh_makeshlibs:258 dh_md5sums:90 dh_movefiles:170 dh_perl:146 dh_prep:60 dh_python:280 dh_scrollkeeper:28 dh_shlibdeps:171 dh_strip:230 dh_suidregister:117 dh_testdir:44 dh_testroot:27 dh_undocumented:28 dh_usrlocal:114
+#: debhelper.pod:642 dh:883 dh_auto_build:47 dh_auto_clean:50 dh_auto_configure:53 dh_auto_install:85 dh_auto_test:59 dh_bugfiles:122 dh_builddeb:120 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129 dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279 dh_installcatalogs:116 dh_installchangelogs:171 dh_installcron:77 dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86 dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106 dh_installifupdown:69 dh_installinfo:77 dh_installinit:275 dh_installlogcheck:78 dh_installlogrotate:50 dh_installman:259 dh_installmanpages:197 dh_installmenu:87 dh_installmime:95 dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115 dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57 dh_listpackages:30 dh_makeshlibs:258 dh_md5sums:90 dh_movefiles:170 dh_perl:146 dh_prep:60 dh_python:280 dh_scrollkeeper:28 dh_shlibdeps:171 dh_strip:230 dh_suidregister:117 dh_testdir:44 dh_testroot:27 dh_undocumented:28 dh_usrlocal:114
msgid "SEE ALSO"
msgstr ""
msgstr ""
#. type: =head1
-#: debhelper.pod:656 dh:864 dh_auto_build:53 dh_auto_clean:56 dh_auto_configure:59 dh_auto_install:91 dh_auto_test:65 dh_bugfiles:130 dh_builddeb:126 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135 dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285 dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83 dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92 dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112 dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:82 dh_installlogrotate:56 dh_installman:265 dh_installmanpages:203 dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65 dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93 dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264 dh_md5sums:96 dh_movefiles:176 dh_perl:152 dh_prep:66 dh_python:286 dh_scrollkeeper:34 dh_shlibdeps:177 dh_strip:236 dh_suidregister:123 dh_testdir:50 dh_testroot:33 dh_undocumented:34 dh_usrlocal:120
+#: debhelper.pod:656 dh:889 dh_auto_build:53 dh_auto_clean:56 dh_auto_configure:59 dh_auto_install:91 dh_auto_test:65 dh_bugfiles:130 dh_builddeb:126 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135 dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285 dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83 dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92 dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112 dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:84 dh_installlogrotate:56 dh_installman:265 dh_installmanpages:203 dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65 dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93 dh_link:232 dh_lintian:65 dh_listpackages:36 dh_makeshlibs:264 dh_md5sums:96 dh_movefiles:176 dh_perl:152 dh_prep:66 dh_python:286 dh_scrollkeeper:34 dh_shlibdeps:177 dh_strip:236 dh_suidregister:123 dh_testdir:50 dh_testroot:33 dh_undocumented:34 dh_usrlocal:120
msgid "AUTHOR"
msgstr ""
#. type: textblock
-#: debhelper.pod:658 dh:866 dh_auto_build:55 dh_auto_clean:58 dh_auto_configure:61 dh_auto_install:93 dh_auto_test:67 dh_builddeb:128 dh_clean:150 dh_compress:214 dh_fixperms:137 dh_gencontrol:90 dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152 dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315 dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77 dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58 dh_installman:267 dh_installmanpages:205 dh_installmenu:97 dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73 dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234 dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178 dh_prep:68 dh_shlibdeps:179 dh_strip:238 dh_suidregister:125 dh_testdir:52 dh_testroot:35 dh_undocumented:36
+#: debhelper.pod:658 dh:891 dh_auto_build:55 dh_auto_clean:58 dh_auto_configure:61 dh_auto_install:93 dh_auto_test:67 dh_builddeb:128 dh_clean:150 dh_compress:214 dh_fixperms:137 dh_gencontrol:90 dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152 dh_installdebconf:134 dh_installdirs:94 dh_installdocs:315 dh_installemacsen:132 dh_installexamples:114 dh_installifupdown:77 dh_installinfo:85 dh_installinit:283 dh_installlogrotate:58 dh_installman:267 dh_installmanpages:205 dh_installmenu:97 dh_installmime:103 dh_installmodules:132 dh_installpam:67 dh_installppp:73 dh_installudev:123 dh_installwm:116 dh_installxfonts:95 dh_link:234 dh_listpackages:38 dh_makeshlibs:266 dh_md5sums:98 dh_movefiles:178 dh_prep:68 dh_shlibdeps:179 dh_strip:238 dh_suidregister:125 dh_testdir:52 dh_testroot:35 dh_undocumented:36
msgid "Joey Hess <joeyh@debian.org>"
msgstr ""
"B<install>, B<binary-arch>, B<binary-indep>, and B<binary>."
msgstr ""
-#. type: textblock
+#. type: =head1
#: dh:23
+msgid "OVERRIDE TARGETS"
+msgstr ""
+
+#. type: textblock
+#: dh:25
msgid ""
-"Commands in the B<build-indep>, B<install-indep> and B<binary-indep> "
-"sequences are passed the B<-i> option to ensure they only work on "
-"architecture independent packages, and commands in the B<build-arch>, "
-"B<install-arch> and B<binary-arch> sequences are passed the B<-a> option to "
-"ensure they only work on architecture dependent packages."
+"A F<debian/rules> file using B<dh> can override the command that is run at "
+"any step in a sequence, by defining an override target."
msgstr ""
#. type: textblock
-#: dh:29
+#: dh:28
msgid ""
-"If F<debian/rules> contains a target with a name like "
-"B<override_>I<dh_command>, then when it would normally run I<dh_command>, "
-"B<dh> will instead call that target. The override target can then run the "
-"command with additional options, or run entirely different commands "
-"instead. See examples below. (Note that to use this feature, you should "
-"Build-Depend on debhelper 7.0.50 or above.)"
+"To override I<dh_command>, add a target named B<override_>I<dh_command> to "
+"the rules file. When it would normally run I<dh_command>, B<dh> will instead "
+"call that target. The override target can then run the command with "
+"additional options, or run entirely different commands instead. See examples "
+"below. (Note that to use this feature, you should Build-Depend on debhelper "
+"7.0.50 or above.)"
+msgstr ""
+
+#. type: textblock
+#: dh:36
+msgid ""
+"Override targets can also be defined to run only when building architecture "
+"dependent or architecture independent packages. Use targets with names like "
+"B<override_>I<dh_command>B<-arch> and B<override_>I<dh_command>B<-indep>. "
+"(Note that to use this feature, you should Build-Depend on debhelper 8.9.7 "
+"or above.)"
msgstr ""
#. type: =head1
-#: dh:35 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31 dh_auto_install:43 dh_auto_test:31 dh_bugfiles:50 dh_builddeb:21 dh_clean:41 dh_compress:48 dh_fixperms:31 dh_gconf:39 dh_gencontrol:26 dh_icons:25 dh_install:54 dh_installcatalogs:49 dh_installchangelogs:56 dh_installcron:40 dh_installdebconf:61 dh_installdirs:31 dh_installdocs:66 dh_installemacsen:48 dh_installexamples:32 dh_installifupdown:39 dh_installinfo:31 dh_installinit:48 dh_installlogcheck:40 dh_installlogrotate:22 dh_installman:60 dh_installmanpages:40 dh_installmenu:41 dh_installmime:41 dh_installmodules:44 dh_installpam:31 dh_installppp:35 dh_installudev:35 dh_installwm:34 dh_link:51 dh_makeshlibs:43 dh_md5sums:28 dh_movefiles:38 dh_perl:31 dh_prep:26 dh_python:39 dh_shlibdeps:26 dh_strip:35 dh_testdir:23 dh_usrlocal:39
+#: dh:43 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31 dh_auto_install:43 dh_auto_test:31 dh_bugfiles:50 dh_builddeb:21 dh_clean:41 dh_compress:48 dh_fixperms:31 dh_gconf:39 dh_gencontrol:26 dh_icons:25 dh_install:54 dh_installcatalogs:49 dh_installchangelogs:56 dh_installcron:40 dh_installdebconf:61 dh_installdirs:31 dh_installdocs:66 dh_installemacsen:48 dh_installexamples:32 dh_installifupdown:39 dh_installinfo:31 dh_installinit:48 dh_installlogcheck:42 dh_installlogrotate:22 dh_installman:60 dh_installmanpages:40 dh_installmenu:41 dh_installmime:41 dh_installmodules:44 dh_installpam:31 dh_installppp:35 dh_installudev:35 dh_installwm:34 dh_link:51 dh_makeshlibs:43 dh_md5sums:28 dh_movefiles:38 dh_perl:31 dh_prep:26 dh_python:39 dh_shlibdeps:26 dh_strip:35 dh_testdir:23 dh_usrlocal:39
msgid "OPTIONS"
msgstr ""
#. type: =item
-#: dh:39
+#: dh:47
msgid "B<--with> I<addon>[B<,>I<addon> ...]"
msgstr ""
#. type: textblock
-#: dh:41
+#: dh:49
msgid ""
"Add the debhelper commands specified by the given addon to appropriate "
"places in the sequence of commands that is run. This option can be repeated "
msgstr ""
#. type: =item
-#: dh:48
+#: dh:56
msgid "B<--without> I<addon>"
msgstr ""
#. type: textblock
-#: dh:50
+#: dh:58
msgid "The inverse of B<--with>, disables using the given addon."
msgstr ""
#. type: textblock
-#: dh:54
+#: dh:62
msgid "List all available addons."
msgstr ""
#. type: textblock
-#: dh:58
+#: dh:66
msgid "Prints commands that would run for a given sequence, but does not run them."
msgstr ""
#. type: textblock
-#: dh:62
+#: dh:70
msgid ""
"Other options passed to B<dh> are passed on to each command it runs. This "
"can be used to set an option like B<-v> or B<-X> or B<-N>, as well as for "
msgstr ""
#. type: =head1
-#: dh:66 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
+#: dh:74 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
msgid "EXAMPLES"
msgstr ""
#. type: textblock
-#: dh:68
+#: dh:76
msgid ""
"To see what commands are included in a sequence, without actually doing "
"anything:"
msgstr ""
#. type: verbatim
-#: dh:71
+#: dh:79
#, no-wrap
msgid ""
"\tdh binary-arch --no-act\n"
msgstr ""
#. type: textblock
-#: dh:73
+#: dh:81
msgid ""
"This is a very simple rules file, for packages where the default sequences "
"of commands work with no additional options."
msgstr ""
#. type: verbatim
-#: dh:76 dh:83 dh:97 dh:110
+#: dh:84 dh:91 dh:105 dh:118
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: verbatim
-#: dh:80
+#: dh:88
#, no-wrap
msgid ""
"Often you'll want to pass an option to a specific debhelper command. The\n"
msgstr ""
#. type: verbatim
-#: dh:87
+#: dh:95
#, no-wrap
msgid ""
"\toverride_dh_strip:\n"
msgstr ""
#. type: verbatim
-#: dh:90
+#: dh:98
#, no-wrap
msgid ""
"\toverride_dh_installdocs:\n"
msgstr ""
#. type: textblock
-#: dh:93
+#: dh:101
msgid ""
"Sometimes the automated L<dh_auto_configure(1)> and L<dh_auto_build(1)> "
"can't guess what to do for a strange package. Here's how to avoid running "
msgstr ""
#. type: verbatim
-#: dh:101
+#: dh:109
#, no-wrap
msgid ""
"\toverride_dh_auto_configure:\n"
msgstr ""
#. type: verbatim
-#: dh:104
+#: dh:112
#, no-wrap
msgid ""
"\toverride_dh_auto_build:\n"
msgstr ""
#. type: textblock
-#: dh:107
+#: dh:115
msgid ""
"Another common case is wanting to do something manually before or after a "
"particular debhelper command is run."
msgstr ""
#. type: verbatim
-#: dh:114
+#: dh:122
#, no-wrap
msgid ""
"\toverride_dh_fixperms:\n"
msgstr ""
#. type: textblock
-#: dh:118
+#: dh:126
msgid ""
-"Python tools are not run by dh by default, due to the continual change in "
-"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
-"Here is how to use B<dh_python2>."
+"If your package uses autotools and you want to freshen F<config.sub> and "
+"F<config.guess> with newer versions from the B<autotools-dev> package at "
+"build time, you can use some commands provided in B<autotools-dev> that "
+"automate it, like this."
msgstr ""
#. type: verbatim
-#: dh:122
+#: dh:131
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\t%:\n"
-"\t\tdh $@ --with python2\n"
+"\t\tdh $@ --with autotools_dev\n"
"\n"
msgstr ""
#. type: textblock
-#: dh:126
+#: dh:135
msgid ""
-"If your package uses autotools and you want to freshen F<config.sub> and "
-"F<config.guess> with newer versions from the B<autotools-dev> package at "
-"build time, you can use some commands provided in B<autotools-dev> that "
-"automate it, like this."
+"Python tools are not run by dh by default, due to the continual change in "
+"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
+"Here is how to use B<dh_python2>."
msgstr ""
#. type: verbatim
-#: dh:131
+#: dh:139
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\t%:\n"
-"\t\tdh $@ --with autotools_dev\n"
+"\t\tdh $@ --with python2\n"
"\n"
msgstr ""
#. type: textblock
-#: dh:135
+#: dh:143
msgid ""
"Here is how to force use of Perl's B<Module::Build> build system, which can "
"be necessary if debhelper wrongly detects that the package uses MakeMaker."
msgstr ""
#. type: verbatim
-#: dh:139
+#: dh:147
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: textblock
-#: dh:143
+#: dh:151
msgid ""
"Here is an example of overriding where the B<dh_auto_>I<*> commands find the "
"package's source, for a package where the source is located in a "
msgstr ""
#. type: verbatim
-#: dh:147
+#: dh:155
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: textblock
-#: dh:151
+#: dh:159
msgid ""
"And here is an example of how to tell the B<dh_auto_>I<*> commands to build "
"in a subdirectory, which will be removed on B<clean>."
msgstr ""
#. type: verbatim
-#: dh:154
+#: dh:162
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: textblock
-#: dh:158
+#: dh:166
msgid ""
"If your package can be built in parallel, you can support parallel building "
"as follows. Then B<dpkg-buildpackage -j> will work."
msgstr ""
#. type: verbatim
-#: dh:161
+#: dh:169
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: textblock
-#: dh:165
+#: dh:173
msgid ""
"Here is a way to prevent B<dh> from running several commands that you don't "
"want it to run, by defining empty override targets for each command."
msgstr ""
#. type: verbatim
-#: dh:168 dh:179 dh:196
+#: dh:176 dh:187
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
msgstr ""
#. type: verbatim
-#: dh:172
+#: dh:180
#, no-wrap
msgid ""
"\t# Commands not to run:\n"
msgstr ""
#. type: textblock
-#: dh:175
+#: dh:183
msgid ""
-"Sometimes, you may need to make an override target only run commands when a "
-"particular package is being built. This can be accomplished using "
-"L<dh_listpackages(1)> to test what is being built. For example:"
+"A long build process for a separate documentation package can be separated "
+"out using architecture independent overrides. These will be skipped when "
+"running build-arch and binary-arch sequences."
msgstr ""
#. type: verbatim
-#: dh:183
+#: dh:191
#, no-wrap
msgid ""
-"\toverride_dh_fixperms:\n"
-"\t\tdh_fixperms\n"
-"\tifneq (,$(filter foo, $(shell dh_listpackages)))\n"
-"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
-"\tendif\n"
+"\toverride_dh_auto_build-indep:\n"
+"\t\t$(MAKE) -C docs\n"
"\n"
msgstr ""
-#. type: textblock
-#: dh:189
+#. type: verbatim
+#: dh:194
+#, no-wrap
msgid ""
-"Finally, remember that you are not limited to using override targets in the "
-"rules file when using B<dh>. You can also explicitly define any of the "
-"regular rules file targets when it makes sense to do so. A common reason to "
-"do this is when your package needs different B<build-arch> and "
-"B<build-indep> targets. For example, a package with a long document build "
-"process can put it in B<build-indep>."
+"\t# No tests needed for docs\n"
+"\toverride_dh_auto_test-indep:\n"
+"\n"
msgstr ""
#. type: verbatim
-#: dh:200
+#: dh:197
#, no-wrap
msgid ""
-"\tbuild-indep:\n"
-"\t\t$(MAKE) docs\n"
-"\tbuild-arch:\n"
-"\t\t$(MAKE) bins\n"
+"\toverride_dh_auto_install-indep:\n"
+"\t\t$(MAKE) -C docs install\n"
"\n"
msgstr ""
#. type: textblock
-#: dh:205
+#: dh:200
msgid ""
-"Note that in the example above, dh will arrange for \"debian/rules build\" "
-"to call your build-indep and build-arch targets. You do not need to "
-"explicitly define those dependencies in the rules file when using dh with "
-"compatibility level v9. This example would be more complicated with earlier "
-"compatibility levels."
+"Adding to the example above, suppose you need to chmod a file, but only when "
+"building the architecture dependent package, as it's not present when "
+"building only documentation."
+msgstr ""
+
+#. type: verbatim
+#: dh:204
+#, no-wrap
+msgid ""
+"\toverride_dh_fixperms-arch:\n"
+"\t\tdh_fixperms\n"
+"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+"\n"
msgstr ""
#. type: =head1
-#: dh:211
+#: dh:208
msgid "INTERNALS"
msgstr ""
#. type: textblock
-#: dh:213
+#: dh:210
msgid ""
"If you're curious about B<dh>'s internals, here's how it works under the "
"hood."
msgstr ""
#. type: textblock
-#: dh:215
+#: dh:212
msgid ""
"Each debhelper command will record when it's successfully run in "
"F<debian/package.debhelper.log>. (Which B<dh_clean> deletes.) So B<dh> can "
msgstr ""
#. type: textblock
-#: dh:220
+#: dh:217
msgid ""
"Each time B<dh> is run, it examines the log, and finds the last logged "
"command that is in the specified sequence. It then continues with the next "
msgstr ""
#. type: textblock
-#: dh:225
+#: dh:222
msgid ""
"A sequence can also run dependent targets in debian/rules. For example, the "
"\"binary\" sequence runs the \"install\" target."
msgstr ""
#. type: textblock
-#: dh:228
+#: dh:225
msgid ""
"B<dh> uses the B<DH_INTERNAL_OPTIONS> environment variable to pass "
"information through to debhelper commands that are run inside override "
"as the name might suggest, is subject to change at any time."
msgstr ""
+#. type: textblock
+#: dh:230
+msgid ""
+"Commands in the B<build-indep>, B<install-indep> and B<binary-indep> "
+"sequences are passed the B<-i> option to ensure they only work on "
+"architecture independent packages, and commands in the B<build-arch>, "
+"B<install-arch> and B<binary-arch> sequences are passed the B<-a> option to "
+"ensure they only work on architecture dependent packages."
+msgstr ""
+
#. type: =head1
-#: dh:233
+#: dh:236
msgid "DEPRECATED OPTIONS"
msgstr ""
#. type: textblock
-#: dh:235
+#: dh:238
msgid ""
"The following options are deprecated. It's much better to use override "
"targets instead."
msgstr ""
#. type: =item
-#: dh:240
+#: dh:243
msgid "B<--until> I<cmd>"
msgstr ""
#. type: textblock
-#: dh:242
+#: dh:245
msgid "Run commands in the sequence until and including I<cmd>, then stop."
msgstr ""
#. type: =item
-#: dh:244
+#: dh:247
msgid "B<--before> I<cmd>"
msgstr ""
#. type: textblock
-#: dh:246
+#: dh:249
msgid "Run commands in the sequence before I<cmd>, then stop."
msgstr ""
#. type: =item
-#: dh:248
+#: dh:251
msgid "B<--after> I<cmd>"
msgstr ""
#. type: textblock
-#: dh:250
+#: dh:253
msgid "Run commands in the sequence that come after I<cmd>."
msgstr ""
#. type: =item
-#: dh:252
+#: dh:255
msgid "B<--remaining>"
msgstr ""
#. type: textblock
-#: dh:254
+#: dh:257
msgid "Run all commands in the sequence that have yet to be run."
msgstr ""
#. type: textblock
-#: dh:258
+#: dh:261
msgid ""
"In the above options, I<cmd> can be a full name of a debhelper command, or a "
"substring. It'll first search for a command in the sequence exactly matching "
msgstr ""
#. type: textblock
-#: dh:860 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55 dh_auto_install:87 dh_auto_test:61 dh_builddeb:122 dh_clean:144 dh_compress:208 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84 dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173 dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88 dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108 dh_installifupdown:71 dh_installinfo:79 dh_installinit:277 dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:261 dh_installmanpages:199 dh_installmime:97 dh_installmodules:126 dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110 dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260 dh_md5sums:92 dh_movefiles:172 dh_perl:148 dh_prep:62 dh_python:282 dh_strip:232 dh_suidregister:119 dh_testdir:46 dh_testroot:29 dh_undocumented:30 dh_usrlocal:116
+#: dh:885 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55 dh_auto_install:87 dh_auto_test:61 dh_builddeb:122 dh_clean:144 dh_compress:208 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84 dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173 dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88 dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108 dh_installifupdown:71 dh_installinfo:79 dh_installinit:277 dh_installlogcheck:80 dh_installlogrotate:52 dh_installman:261 dh_installmanpages:199 dh_installmime:97 dh_installmodules:126 dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110 dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260 dh_md5sums:92 dh_movefiles:172 dh_perl:148 dh_prep:62 dh_python:282 dh_strip:232 dh_suidregister:119 dh_testdir:46 dh_testroot:29 dh_undocumented:30 dh_usrlocal:116
msgid "L<debhelper(7)>"
msgstr ""
#. type: textblock
-#: dh:862 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57 dh_auto_install:89 dh_auto_test:63 dh_bugfiles:128 dh_builddeb:124 dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:133 dh_gconf:103 dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175 dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90 dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110 dh_installifupdown:73 dh_installinfo:81 dh_installinit:279 dh_installlogrotate:54 dh_installman:263 dh_installmanpages:201 dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63 dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91 dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262 dh_md5sums:94 dh_movefiles:174 dh_perl:150 dh_prep:64 dh_python:284 dh_scrollkeeper:32 dh_shlibdeps:175 dh_strip:234 dh_suidregister:121 dh_testdir:48 dh_testroot:31 dh_undocumented:32 dh_usrlocal:118
+#: dh:887 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57 dh_auto_install:89 dh_auto_test:63 dh_bugfiles:128 dh_builddeb:124 dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:133 dh_gconf:103 dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175 dh_installcron:81 dh_installdeb:148 dh_installdebconf:130 dh_installdirs:90 dh_installdocs:311 dh_installemacsen:128 dh_installexamples:110 dh_installifupdown:73 dh_installinfo:81 dh_installinit:279 dh_installlogrotate:54 dh_installman:263 dh_installmanpages:201 dh_installmenu:93 dh_installmime:99 dh_installmodules:128 dh_installpam:63 dh_installppp:69 dh_installudev:119 dh_installwm:112 dh_installxfonts:91 dh_link:230 dh_lintian:61 dh_listpackages:34 dh_makeshlibs:262 dh_md5sums:94 dh_movefiles:174 dh_perl:150 dh_prep:64 dh_python:284 dh_scrollkeeper:32 dh_shlibdeps:175 dh_strip:234 dh_suidregister:121 dh_testdir:48 dh_testroot:31 dh_undocumented:32 dh_usrlocal:118
msgid "This program is a part of debhelper."
msgstr ""
msgstr ""
#. type: =item
-#: dh_installcron:44 dh_installifupdown:43 dh_installinit:104 dh_installlogcheck:44 dh_installlogrotate:26 dh_installmodules:52 dh_installpam:35 dh_installppp:39 dh_installudev:39
+#: dh_installcron:44 dh_installifupdown:43 dh_installinit:104 dh_installlogcheck:46 dh_installlogrotate:26 dh_installmodules:52 dh_installpam:35 dh_installppp:39 dh_installudev:39
msgid "B<--name=>I<name>"
msgstr ""
msgstr ""
#. type: textblock
-#: dh_installlogcheck:46
+#: dh_installlogcheck:48
msgid ""
"Look for files named F<debian/package.name.logcheck.*> and install them into "
"the corresponding subdirectories of F<etc/logcheck/>, but use the specified "
msgstr ""
#. type: verbatim
-#: dh_installlogcheck:80
+#: dh_installlogcheck:82
#, no-wrap
msgid ""
"This program is a part of debhelper.\n"
msgstr ""
#. type: textblock
-#: dh_installlogcheck:84
+#: dh_installlogcheck:86
msgid "Jon Middleton <jjm@debian.org>"
msgstr ""
msgid ""
msgstr ""
"Project-Id-Version: debhelper 8.0.0\n"
-"POT-Creation-Date: 2011-09-10 18:35-0400\n"
+"POT-Creation-Date: 2011-09-11 21:40-0400\n"
"PO-Revision-Date: 2010-11-11 22:28+0100\n"
"Last-Translator: Omar Campagne <ocampagne@gmail.com>\n"
"Language-Team: Debian l10n Spanish <debian-l10n-spanish@lists.debian.org>\n"
# type: =item
#. type: =item
-#: debhelper.pod:101 dh:56
+#: debhelper.pod:101 dh:64
msgid "B<--no-act>"
msgstr "B<--no-act>"
# type: =item
#. type: =item
-#: debhelper.pod:244 dh:52
+#: debhelper.pod:244 dh:60
msgid "B<--list>, B<-l>"
msgstr "B<--list>, B<-l>"
# type: =head1
#. type: =head1
-#: debhelper.pod:642 dh:858 dh_auto_build:47 dh_auto_clean:50
+#: debhelper.pod:642 dh:883 dh_auto_build:47 dh_auto_clean:50
#: dh_auto_configure:53 dh_auto_install:85 dh_auto_test:59 dh_bugfiles:122
#: dh_builddeb:120 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129
#: dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279
#: dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86
#: dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106
#: dh_installifupdown:69 dh_installinfo:77 dh_installinit:275
-#: dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:259
+#: dh_installlogcheck:78 dh_installlogrotate:50 dh_installman:259
#: dh_installmanpages:197 dh_installmenu:87 dh_installmime:95
#: dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115
#: dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57
# type: =head1
#. type: =head1
-#: debhelper.pod:656 dh:864 dh_auto_build:53 dh_auto_clean:56
+#: debhelper.pod:656 dh:889 dh_auto_build:53 dh_auto_clean:56
#: dh_auto_configure:59 dh_auto_install:91 dh_auto_test:65 dh_bugfiles:130
#: dh_builddeb:126 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135
#: dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285
#: dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83
#: dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92
#: dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112
-#: dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:82
+#: dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:84
#: dh_installlogrotate:56 dh_installman:265 dh_installmanpages:203
#: dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65
#: dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93
# type: textblock
#. type: textblock
-#: debhelper.pod:658 dh:866 dh_auto_build:55 dh_auto_clean:58
+#: debhelper.pod:658 dh:891 dh_auto_build:55 dh_auto_clean:58
#: dh_auto_configure:61 dh_auto_install:93 dh_auto_test:67 dh_builddeb:128
#: dh_clean:150 dh_compress:214 dh_fixperms:137 dh_gencontrol:90
#: dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152
"aceptadas se corresponden con los objetivos de un fichero F<debian/rules>: "
"B<build>, B<clean>, B<install>, B<binary-arch>, B<binary-indep> y B<binary>."
-#. type: textblock
+#. type: =head1
#: dh:23
-#, fuzzy
-#| msgid ""
-#| "Commands in the B<binary-indep> sequence are passed the B<-i> option to "
-#| "ensure they only work on binary independent packages, and commands in the "
-#| "B<binary-arch> sequences are passed the B<-a> option to ensure they only "
-#| "work on architecture dependent packages."
-msgid ""
-"Commands in the B<build-indep>, B<install-indep> and B<binary-indep> "
-"sequences are passed the B<-i> option to ensure they only work on "
-"architecture independent packages, and commands in the B<build-arch>, "
-"B<install-arch> and B<binary-arch> sequences are passed the B<-a> option to "
-"ensure they only work on architecture dependent packages."
+msgid "OVERRIDE TARGETS"
msgstr ""
-"La opción B<-i> se introduce a las órdenes en la secuencia B<binary-indep> "
-"para asegurar que sólo actúan sobre paquetes binarios independientes, y la "
-"opción B<-a> se introduce a órdenes en la secuencia B<binary-arch> para "
-"asegurar que sólo actúan sobre paquetes dependientes de la arquitectura."
#. type: textblock
-#: dh:29
+#: dh:25
msgid ""
-"If F<debian/rules> contains a target with a name like "
-"B<override_>I<dh_command>, then when it would normally run I<dh_command>, "
-"B<dh> will instead call that target. The override target can then run the "
-"command with additional options, or run entirely different commands instead. "
-"See examples below. (Note that to use this feature, you should Build-Depend "
-"on debhelper 7.0.50 or above.)"
+"A F<debian/rules> file using B<dh> can override the command that is run at "
+"any step in a sequence, by defining an override target."
+msgstr ""
+
+#. type: textblock
+#: dh:28
+#, fuzzy
+#| msgid ""
+#| "If F<debian/rules> contains a target with a name like "
+#| "B<override_>I<dh_command>, then when it would normally run I<dh_command>, "
+#| "B<dh> will instead call that target. The override target can then run the "
+#| "command with additional options, or run entirely different commands "
+#| "instead. See examples below. (Note that to use this feature, you should "
+#| "Build-Depend on debhelper 7.0.50 or above.)"
+msgid ""
+"To override I<dh_command>, add a target named B<override_>I<dh_command> to "
+"the rules file. When it would normally run I<dh_command>, B<dh> will instead "
+"call that target. The override target can then run the command with "
+"additional options, or run entirely different commands instead. See examples "
+"below. (Note that to use this feature, you should Build-Depend on debhelper "
+"7.0.50 or above.)"
msgstr ""
"Si F<debian/rules> contiene un objetivo con un nombre del tipo "
"B<override_>I<dh_orden>, B<dh> invocará este objetivo en lugar de ejecutar "
"funcionalidad, el paquete debe tener una dependencia de construcción sobre "
"la versión 7.0.50 o superior de debhelper."
+#. type: textblock
+#: dh:36
+msgid ""
+"Override targets can also be defined to run only when building architecture "
+"dependent or architecture independent packages. Use targets with names like "
+"B<override_>I<dh_command>B<-arch> and B<override_>I<dh_command>B<-indep>. "
+"(Note that to use this feature, you should Build-Depend on debhelper 8.9.7 "
+"or above.)"
+msgstr ""
+
# type: =head1
#. type: =head1
-#: dh:35 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31
+#: dh:43 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31
#: dh_auto_install:43 dh_auto_test:31 dh_bugfiles:50 dh_builddeb:21
#: dh_clean:41 dh_compress:48 dh_fixperms:31 dh_gconf:39 dh_gencontrol:26
#: dh_icons:25 dh_install:54 dh_installcatalogs:49 dh_installchangelogs:56
#: dh_installcron:40 dh_installdebconf:61 dh_installdirs:31 dh_installdocs:66
#: dh_installemacsen:48 dh_installexamples:32 dh_installifupdown:39
-#: dh_installinfo:31 dh_installinit:48 dh_installlogcheck:40
+#: dh_installinfo:31 dh_installinit:48 dh_installlogcheck:42
#: dh_installlogrotate:22 dh_installman:60 dh_installmanpages:40
#: dh_installmenu:41 dh_installmime:41 dh_installmodules:44 dh_installpam:31
#: dh_installppp:35 dh_installudev:35 dh_installwm:34 dh_link:51
msgstr "OPCIONES"
#. type: =item
-#: dh:39
+#: dh:47
msgid "B<--with> I<addon>[B<,>I<addon> ...]"
msgstr "B<--with> I<extensión>[B<,>I<extensión>,...]"
#. type: textblock
-#: dh:41
+#: dh:49
msgid ""
"Add the debhelper commands specified by the given addon to appropriate "
"places in the sequence of commands that is run. This option can be repeated "
# type: =item
#. type: =item
-#: dh:48
+#: dh:56
msgid "B<--without> I<addon>"
msgstr "B<--without> I<extensión>"
#. type: textblock
-#: dh:50
+#: dh:58
msgid "The inverse of B<--with>, disables using the given addon."
msgstr "Lo contrario de B<--with>, desactiva la extensión dada."
#. type: textblock
-#: dh:54
+#: dh:62
msgid "List all available addons."
msgstr "Lista todas las extensiones disponibles."
#. type: textblock
-#: dh:58
+#: dh:66
msgid ""
"Prints commands that would run for a given sequence, but does not run them."
msgstr ""
"ejecuta."
#. type: textblock
-#: dh:62
+#: dh:70
#, fuzzy
#| msgid ""
#| "All other options passed to B<dh> are passed on to each command it runs. "
# type: =head1
#. type: =head1
-#: dh:66 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
+#: dh:74 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
msgid "EXAMPLES"
msgstr "EJEMPLOS"
#. type: textblock
-#: dh:68
+#: dh:76
msgid ""
"To see what commands are included in a sequence, without actually doing "
"anything:"
"realidad:"
#. type: verbatim
-#: dh:71
+#: dh:79
#, no-wrap
msgid ""
"\tdh binary-arch --no-act\n"
"\n"
#. type: textblock
-#: dh:73
+#: dh:81
msgid ""
"This is a very simple rules file, for packages where the default sequences "
"of commands work with no additional options."
"predeterminadas de órdenes funcionan sin opciones adicionales."
#. type: verbatim
-#: dh:76 dh:83 dh:97 dh:110
+#: dh:84 dh:91 dh:105 dh:118
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: verbatim
-#: dh:80
+#: dh:88
#, no-wrap
msgid ""
"Often you'll want to pass an option to a specific debhelper command. The\n"
"\t\n"
#. type: verbatim
-#: dh:87
+#: dh:95
#, no-wrap
msgid ""
"\toverride_dh_strip:\n"
"\t\t\n"
#. type: verbatim
-#: dh:90
+#: dh:98
#, no-wrap
msgid ""
"\toverride_dh_installdocs:\n"
"\n"
#. type: textblock
-#: dh:93
+#: dh:101
msgid ""
"Sometimes the automated L<dh_auto_configure(1)> and L<dh_auto_build(1)> "
"can't guess what to do for a strange package. Here's how to avoid running "
"ejecutar sus propias órdenes."
#. type: verbatim
-#: dh:101
+#: dh:109
#, no-wrap
msgid ""
"\toverride_dh_auto_configure:\n"
"\n"
#. type: verbatim
-#: dh:104
+#: dh:112
#, no-wrap
msgid ""
"\toverride_dh_auto_build:\n"
"\n"
#. type: textblock
-#: dh:107
+#: dh:115
msgid ""
"Another common case is wanting to do something manually before or after a "
"particular debhelper command is run."
"se ejecute una orden en particular de debhelper."
#. type: verbatim
-#: dh:114
+#: dh:122
#, no-wrap
msgid ""
"\toverride_dh_fixperms:\n"
"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
"\n"
-#. type: textblock
-#: dh:118
-msgid ""
-"Python tools are not run by dh by default, due to the continual change in "
-"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
-"Here is how to use B<dh_python2>."
-msgstr ""
-
-#. type: verbatim
-#: dh:122
-#, fuzzy, no-wrap
-#| msgid ""
-#| "\t#!/usr/bin/make -f\n"
-#| "\t%:\n"
-#| "\t\tdh $@ --with python-central\n"
-#| "\n"
-msgid ""
-"\t#!/usr/bin/make -f\n"
-"\t%:\n"
-"\t\tdh $@ --with python2\n"
-"\n"
-msgstr ""
-"\t#!/usr/bin/make -f\n"
-"\t%:\n"
-"\t\tdh $@ --with python-central\n"
-"\n"
-
#. type: textblock
#: dh:126
msgid ""
#. type: textblock
#: dh:135
msgid ""
+"Python tools are not run by dh by default, due to the continual change in "
+"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
+"Here is how to use B<dh_python2>."
+msgstr ""
+
+#. type: verbatim
+#: dh:139
+#, fuzzy, no-wrap
+#| msgid ""
+#| "\t#!/usr/bin/make -f\n"
+#| "\t%:\n"
+#| "\t\tdh $@ --with python-central\n"
+#| "\n"
+msgid ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --with python2\n"
+"\n"
+msgstr ""
+"\t#!/usr/bin/make -f\n"
+"\t%:\n"
+"\t\tdh $@ --with python-central\n"
+"\n"
+
+#. type: textblock
+#: dh:143
+msgid ""
"Here is how to force use of Perl's B<Module::Build> build system, which can "
"be necessary if debhelper wrongly detects that the package uses MakeMaker."
msgstr ""
"detecta erróneamente que el paquete usa MakeMaker."
#. type: verbatim
-#: dh:139
+#: dh:147
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:143
+#: dh:151
msgid ""
"Here is an example of overriding where the B<dh_auto_>I<*> commands find the "
"package's source, for a package where the source is located in a "
"en el que las fuentes se ubican en un subdirectorio."
#. type: verbatim
-#: dh:147
+#: dh:155
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:151
+#: dh:159
msgid ""
"And here is an example of how to tell the B<dh_auto_>I<*> commands to build "
"in a subdirectory, which will be removed on B<clean>."
"B<clean>."
#. type: verbatim
-#: dh:154
+#: dh:162
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:158
+#: dh:166
msgid ""
"If your package can be built in parallel, you can support parallel building "
"as follows. Then B<dpkg-buildpackage -j> will work."
"j> funcionará."
#. type: verbatim
-#: dh:161
+#: dh:169
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:165
+#: dh:173
msgid ""
"Here is a way to prevent B<dh> from running several commands that you don't "
"want it to run, by defining empty override targets for each command."
"cada orden."
#. type: verbatim
-#: dh:168 dh:179 dh:196
+#: dh:176 dh:187
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\t\n"
#. type: verbatim
-#: dh:172
+#: dh:180
#, no-wrap
msgid ""
"\t# Commands not to run:\n"
"\n"
#. type: textblock
-#: dh:175
+#: dh:183
msgid ""
-"Sometimes, you may need to make an override target only run commands when a "
-"particular package is being built. This can be accomplished using "
-"L<dh_listpackages(1)> to test what is being built. For example:"
+"A long build process for a separate documentation package can be separated "
+"out using architecture independent overrides. These will be skipped when "
+"running build-arch and binary-arch sequences."
msgstr ""
-"A veces, puede que desee hacer que un objetivo «override» ejecute las "
-"órdenes sólo cuando se construya un paquete en particular. Para ello, use "
-"L<dh_listpackages(1)> para comprobar qué paquete se está construyendo. Por "
-"ejemplo:"
#. type: verbatim
-#: dh:183
+#: dh:191
#, fuzzy, no-wrap
#| msgid ""
-#| "\toverride_dh_fixperms:\n"
-#| "\t\tdh_fixperms\n"
-#| "\tifneq (,$(findstring foo, $(shell dh_listpackages)))\n"
-#| "\t\tchmod 4755 debian/foo/usr/bin/foo\n"
-#| "\tendif\n"
+#| "\toverride_dh_auto_configure:\n"
+#| "\t\t./mondoconfig\n"
#| "\n"
msgid ""
-"\toverride_dh_fixperms:\n"
-"\t\tdh_fixperms\n"
-"\tifneq (,$(filter foo, $(shell dh_listpackages)))\n"
-"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
-"\tendif\n"
+"\toverride_dh_auto_build-indep:\n"
+"\t\t$(MAKE) -C docs\n"
"\n"
msgstr ""
-"\toverride_dh_fixperms:\n"
-"\t\tdh_fixperms\n"
-"\tifneq (,$(findstring foo, $(shell dh_listpackages)))\n"
-"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
-"\tendif\n"
+"\toverride_dh_auto_configure:\n"
+"\t\t./mondoconfig\n"
"\n"
-#. type: textblock
-#: dh:189
-#, fuzzy
-#| msgid ""
-#| "Finally, remember that you are not limited to using override targets in "
-#| "the rules file when using B<dh>. You can also explicitly define any of "
-#| "the regular rules file targets when it makes sense to do so. A common "
-#| "reason to do this is if your package needs different B<build-arch> and "
-#| "B<build-indep> targets. For example, a package with a long document build "
-#| "process can put it in B<build-indep> to avoid build daemons redundantly "
-#| "building the documentation."
-msgid ""
-"Finally, remember that you are not limited to using override targets in the "
-"rules file when using B<dh>. You can also explicitly define any of the "
-"regular rules file targets when it makes sense to do so. A common reason to "
-"do this is when your package needs different B<build-arch> and B<build-"
-"indep> targets. For example, a package with a long document build process "
-"can put it in B<build-indep>."
-msgstr ""
-"Por último, recuerde que no está limitado al uso de objetivos «override» en "
-"el fichero «rules» cuando use B<dh>. También puede definir de forma "
-"explícita cualquiera de los objetivos normales del fichero «rules» cuando "
-"sea oportuno. Una razón común es si su paquete necesita distintos objetivos "
-"B<build-arch> y B<build-indep>. Por ejemplo, puede insertar un paquete bajo "
-"b<build-indep> si tiene una extensa documentación para evitar que los "
-"demonios de construcción generen la documentación de forma innecesaria."
+#. type: verbatim
+#: dh:194
+#, no-wrap
+msgid ""
+"\t# No tests needed for docs\n"
+"\toverride_dh_auto_test-indep:\n"
+"\n"
+msgstr ""
#. type: verbatim
-#: dh:200
+#: dh:197
#, fuzzy, no-wrap
#| msgid ""
-#| "\tbuild: build-arch build-indep ;\n"
-#| "\tbuild-indep:\n"
-#| "\t\t$(MAKE) docs\n"
-#| "\tbuild-arch:\n"
-#| "\t\t$(MAKE) bins\n"
+#| "\toverride_dh_installdocs:\n"
+#| "\t\tdh_installdocs README TODO\n"
#| "\n"
msgid ""
-"\tbuild-indep:\n"
-"\t\t$(MAKE) docs\n"
-"\tbuild-arch:\n"
-"\t\t$(MAKE) bins\n"
+"\toverride_dh_auto_install-indep:\n"
+"\t\t$(MAKE) -C docs install\n"
"\n"
msgstr ""
-"\tbuild: build-arch build-indep ;\n"
-"\tbuild-indep:\n"
-"\t\t$(MAKE) docs\n"
-"\tbuild-arch:\n"
-"\t\t$(MAKE) bins\n"
+"\toverride_dh_installdocs:\n"
+"\t\tdh_installdocs README TODO\n"
"\n"
#. type: textblock
-#: dh:205
+#: dh:200
msgid ""
-"Note that in the example above, dh will arrange for \"debian/rules build\" "
-"to call your build-indep and build-arch targets. You do not need to "
-"explicitly define those dependencies in the rules file when using dh with "
-"compatibility level v9. This example would be more complicated with earlier "
-"compatibility levels."
+"Adding to the example above, suppose you need to chmod a file, but only when "
+"building the architecture dependent package, as it's not present when "
+"building only documentation."
msgstr ""
+#. type: verbatim
+#: dh:204
+#, fuzzy, no-wrap
+#| msgid ""
+#| "\toverride_dh_fixperms:\n"
+#| "\t\tdh_fixperms\n"
+#| "\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+#| "\n"
+msgid ""
+"\toverride_dh_fixperms-arch:\n"
+"\t\tdh_fixperms\n"
+"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+"\n"
+msgstr ""
+"\toverride_dh_fixperms:\n"
+"\t\tdh_fixperms\n"
+"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+"\n"
+
#. type: =head1
-#: dh:211
+#: dh:208
msgid "INTERNALS"
msgstr "FUNCIONAMIENTO INTERNO"
#. type: textblock
-#: dh:213
+#: dh:210
msgid ""
"If you're curious about B<dh>'s internals, here's how it works under the "
"hood."
"puede ver como funciona por dentro."
#. type: textblock
-#: dh:215
+#: dh:212
msgid ""
"Each debhelper command will record when it's successfully run in F<debian/"
"package.debhelper.log>. (Which B<dh_clean> deletes.) So B<dh> can tell which "
"esas órdenes otra vez."
#. type: textblock
-#: dh:220
+#: dh:217
msgid ""
"Each time B<dh> is run, it examines the log, and finds the last logged "
"command that is in the specified sequence. It then continues with the next "
"before>, B<--after> y B<--remaining> pueden anular este comportamiento."
#. type: textblock
-#: dh:225
+#: dh:222
msgid ""
"A sequence can also run dependent targets in debian/rules. For example, the "
"\"binary\" sequence runs the \"install\" target."
msgstr ""
#. type: textblock
-#: dh:228
+#: dh:225
msgid ""
"B<dh> uses the B<DH_INTERNAL_OPTIONS> environment variable to pass "
"information through to debhelper commands that are run inside override "
"«override». El contenido (e incluso, la existencia) de esta variable de "
"entorno, como el nombre sugiere, está sujeto a cambios en cualquier momento."
+#. type: textblock
+#: dh:230
+#, fuzzy
+#| msgid ""
+#| "Commands in the B<binary-indep> sequence are passed the B<-i> option to "
+#| "ensure they only work on binary independent packages, and commands in the "
+#| "B<binary-arch> sequences are passed the B<-a> option to ensure they only "
+#| "work on architecture dependent packages."
+msgid ""
+"Commands in the B<build-indep>, B<install-indep> and B<binary-indep> "
+"sequences are passed the B<-i> option to ensure they only work on "
+"architecture independent packages, and commands in the B<build-arch>, "
+"B<install-arch> and B<binary-arch> sequences are passed the B<-a> option to "
+"ensure they only work on architecture dependent packages."
+msgstr ""
+"La opción B<-i> se introduce a las órdenes en la secuencia B<binary-indep> "
+"para asegurar que sólo actúan sobre paquetes binarios independientes, y la "
+"opción B<-a> se introduce a órdenes en la secuencia B<binary-arch> para "
+"asegurar que sólo actúan sobre paquetes dependientes de la arquitectura."
+
#. type: =head1
-#: dh:233
+#: dh:236
msgid "DEPRECATED OPTIONS"
msgstr ""
#. type: textblock
-#: dh:235
+#: dh:238
msgid ""
"The following options are deprecated. It's much better to use override "
"targets instead."
# type: =item
#. type: =item
-#: dh:240
+#: dh:243
msgid "B<--until> I<cmd>"
msgstr "B<--until> I<orden>"
#. type: textblock
-#: dh:242
+#: dh:245
#, fuzzy
#| msgid "Run commands in the sequence until and including I<cmd>, then stop."
msgid "Run commands in the sequence until and including I<cmd>, then stop."
# type: =item
#. type: =item
-#: dh:244
+#: dh:247
msgid "B<--before> I<cmd>"
msgstr "B<--before> I<orden>"
#. type: textblock
-#: dh:246
+#: dh:249
#, fuzzy
#| msgid "Run commands in the sequence before I<cmd>, then stop."
msgid "Run commands in the sequence before I<cmd>, then stop."
# type: =item
#. type: =item
-#: dh:248
+#: dh:251
msgid "B<--after> I<cmd>"
msgstr "B<--after> I<orden>"
#. type: textblock
-#: dh:250
+#: dh:253
#, fuzzy
#| msgid "Run commands in the sequence that come after I<cmd>."
msgid "Run commands in the sequence that come after I<cmd>."
# type: =item
#. type: =item
-#: dh:252
+#: dh:255
msgid "B<--remaining>"
msgstr "B<--remaining>"
#. type: textblock
-#: dh:254
+#: dh:257
#, fuzzy
#| msgid "Run all commands in the sequence that have yet to be run."
msgid "Run all commands in the sequence that have yet to be run."
msgstr "Ejecuta todas las órdenes en la secuencia que aún no se han ejecutado."
#. type: textblock
-#: dh:258
+#: dh:261
msgid ""
"In the above options, I<cmd> can be a full name of a debhelper command, or a "
"substring. It'll first search for a command in the sequence exactly matching "
# type: textblock
#. type: textblock
-#: dh:860 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55
+#: dh:885 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55
#: dh_auto_install:87 dh_auto_test:61 dh_builddeb:122 dh_clean:144
#: dh_compress:208 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84
#: dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173
#: dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88
#: dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108
#: dh_installifupdown:71 dh_installinfo:79 dh_installinit:277
-#: dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:261
+#: dh_installlogcheck:80 dh_installlogrotate:52 dh_installman:261
#: dh_installmanpages:199 dh_installmime:97 dh_installmodules:126
#: dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110
#: dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260
# type: textblock
#. type: textblock
-#: dh:862 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57
+#: dh:887 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57
#: dh_auto_install:89 dh_auto_test:63 dh_bugfiles:128 dh_builddeb:124
#: dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:133 dh_gconf:103
#: dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175
# type: =item
#. type: =item
#: dh_installcron:44 dh_installifupdown:43 dh_installinit:104
-#: dh_installlogcheck:44 dh_installlogrotate:26 dh_installmodules:52
+#: dh_installlogcheck:46 dh_installlogrotate:26 dh_installmodules:52
#: dh_installpam:35 dh_installppp:39 dh_installudev:39
msgid "B<--name=>I<name>"
msgstr "B<--name=>I<nombre>"
# type: textblock
#. type: textblock
-#: dh_installlogcheck:46
+#: dh_installlogcheck:48
#, fuzzy
#| msgid ""
#| "Look for files named F<debian/package.name.logrotate> and install them as "
# type: verbatim
#. type: verbatim
-#: dh_installlogcheck:80
+#: dh_installlogcheck:82
#, no-wrap
msgid ""
"This program is a part of debhelper.\n"
# type: textblock
#. type: textblock
-#: dh_installlogcheck:84
+#: dh_installlogcheck:86
msgid "Jon Middleton <jjm@debian.org>"
msgstr "Jon Middleton <jjm@debian.org>"
msgstr "Andrew Stribblehill <ads@debian.org>"
#~ msgid ""
-#~ "To patch your package using quilt, you can tell B<dh> to use quilt's B<dh>\n"
+#~ "Sometimes, you may need to make an override target only run commands when "
+#~ "a particular package is being built. This can be accomplished using "
+#~ "L<dh_listpackages(1)> to test what is being built. For example:"
+#~ msgstr ""
+#~ "A veces, puede que desee hacer que un objetivo «override» ejecute las "
+#~ "órdenes sólo cuando se construya un paquete en particular. Para ello, use "
+#~ "L<dh_listpackages(1)> para comprobar qué paquete se está construyendo. "
+#~ "Por ejemplo:"
+
+#, fuzzy
+#~| msgid ""
+#~| "\toverride_dh_fixperms:\n"
+#~| "\t\tdh_fixperms\n"
+#~| "\tifneq (,$(findstring foo, $(shell dh_listpackages)))\n"
+#~| "\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+#~| "\tendif\n"
+#~| "\n"
+#~ msgid ""
+#~ "\toverride_dh_fixperms:\n"
+#~ "\t\tdh_fixperms\n"
+#~ "\tifneq (,$(filter foo, $(shell dh_listpackages)))\n"
+#~ "\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+#~ "\tendif\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\toverride_dh_fixperms:\n"
+#~ "\t\tdh_fixperms\n"
+#~ "\tifneq (,$(findstring foo, $(shell dh_listpackages)))\n"
+#~ "\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+#~ "\tendif\n"
+#~ "\n"
+
+#, fuzzy
+#~| msgid ""
+#~| "Finally, remember that you are not limited to using override targets in "
+#~| "the rules file when using B<dh>. You can also explicitly define any of "
+#~| "the regular rules file targets when it makes sense to do so. A common "
+#~| "reason to do this is if your package needs different B<build-arch> and "
+#~| "B<build-indep> targets. For example, a package with a long document "
+#~| "build process can put it in B<build-indep> to avoid build daemons "
+#~| "redundantly building the documentation."
+#~ msgid ""
+#~ "Finally, remember that you are not limited to using override targets in "
+#~ "the rules file when using B<dh>. You can also explicitly define any of "
+#~ "the regular rules file targets when it makes sense to do so. A common "
+#~ "reason to do this is when your package needs different B<build-arch> and "
+#~ "B<build-indep> targets. For example, a package with a long document "
+#~ "build process can put it in B<build-indep>."
+#~ msgstr ""
+#~ "Por último, recuerde que no está limitado al uso de objetivos «override» "
+#~ "en el fichero «rules» cuando use B<dh>. También puede definir de forma "
+#~ "explícita cualquiera de los objetivos normales del fichero «rules» cuando "
+#~ "sea oportuno. Una razón común es si su paquete necesita distintos "
+#~ "objetivos B<build-arch> y B<build-indep>. Por ejemplo, puede insertar un "
+#~ "paquete bajo b<build-indep> si tiene una extensa documentación para "
+#~ "evitar que los demonios de construcción generen la documentación de forma "
+#~ "innecesaria."
+
+#, fuzzy
+#~| msgid ""
+#~| "\tbuild: build-arch build-indep ;\n"
+#~| "\tbuild-indep:\n"
+#~| "\t\t$(MAKE) docs\n"
+#~| "\tbuild-arch:\n"
+#~| "\t\t$(MAKE) bins\n"
+#~| "\n"
+#~ msgid ""
+#~ "\tbuild-indep:\n"
+#~ "\t\t$(MAKE) docs\n"
+#~ "\tbuild-arch:\n"
+#~ "\t\t$(MAKE) bins\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\tbuild: build-arch build-indep ;\n"
+#~ "\tbuild-indep:\n"
+#~ "\t\t$(MAKE) docs\n"
+#~ "\tbuild-arch:\n"
+#~ "\t\t$(MAKE) bins\n"
+#~ "\n"
+
+#~ msgid ""
+#~ "To patch your package using quilt, you can tell B<dh> to use quilt's "
+#~ "B<dh>\n"
#~ "sequence addons like this:\n"
#~ "\t\n"
#~ msgstr ""
msgid ""
msgstr ""
"Project-Id-Version: debhelper manpages\n"
-"POT-Creation-Date: 2011-09-10 18:35-0400\n"
+"POT-Creation-Date: 2011-09-11 21:40-0400\n"
"PO-Revision-Date: 2011-04-03 17:37+0200\n"
"Last-Translator: Valery Perrin <valery.perrin.debian@free.fr>\n"
"Language-Team: Français <debian-l10n-french@lists.debian.org>\n"
# type: =item
#. type: =item
-#: debhelper.pod:101 dh:56
+#: debhelper.pod:101 dh:64
msgid "B<--no-act>"
msgstr "B<--no-act>"
# type: =item
#. type: =item
-#: debhelper.pod:244 dh:52
+#: debhelper.pod:244 dh:60
msgid "B<--list>, B<-l>"
msgstr "B<--list>, B<-l>"
# type: =head1
#. type: =head1
-#: debhelper.pod:642 dh:858 dh_auto_build:47 dh_auto_clean:50
+#: debhelper.pod:642 dh:883 dh_auto_build:47 dh_auto_clean:50
#: dh_auto_configure:53 dh_auto_install:85 dh_auto_test:59 dh_bugfiles:122
#: dh_builddeb:120 dh_clean:142 dh_compress:206 dh_desktop:31 dh_fixperms:129
#: dh_gconf:99 dh_gencontrol:82 dh_icons:65 dh_install:279
#: dh_installdeb:144 dh_installdebconf:126 dh_installdirs:86
#: dh_installdocs:307 dh_installemacsen:124 dh_installexamples:106
#: dh_installifupdown:69 dh_installinfo:77 dh_installinit:275
-#: dh_installlogcheck:76 dh_installlogrotate:50 dh_installman:259
+#: dh_installlogcheck:78 dh_installlogrotate:50 dh_installman:259
#: dh_installmanpages:197 dh_installmenu:87 dh_installmime:95
#: dh_installmodules:124 dh_installpam:59 dh_installppp:65 dh_installudev:115
#: dh_installwm:108 dh_installxfonts:87 dh_link:226 dh_lintian:57
# type: =head1
#. type: =head1
-#: debhelper.pod:656 dh:864 dh_auto_build:53 dh_auto_clean:56
+#: debhelper.pod:656 dh:889 dh_auto_build:53 dh_auto_clean:56
#: dh_auto_configure:59 dh_auto_install:91 dh_auto_test:65 dh_bugfiles:130
#: dh_builddeb:126 dh_clean:148 dh_compress:212 dh_desktop:37 dh_fixperms:135
#: dh_gconf:105 dh_gencontrol:88 dh_icons:71 dh_install:285
#: dh_installcatalogs:122 dh_installchangelogs:177 dh_installcron:83
#: dh_installdeb:150 dh_installdebconf:132 dh_installdirs:92
#: dh_installdocs:313 dh_installemacsen:130 dh_installexamples:112
-#: dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:82
+#: dh_installifupdown:75 dh_installinfo:83 dh_installlogcheck:84
#: dh_installlogrotate:56 dh_installman:265 dh_installmanpages:203
#: dh_installmenu:95 dh_installmime:101 dh_installmodules:130 dh_installpam:65
#: dh_installppp:71 dh_installudev:121 dh_installwm:114 dh_installxfonts:93
# type: textblock
#. type: textblock
-#: debhelper.pod:658 dh:866 dh_auto_build:55 dh_auto_clean:58
+#: debhelper.pod:658 dh:891 dh_auto_build:55 dh_auto_clean:58
#: dh_auto_configure:61 dh_auto_install:93 dh_auto_test:67 dh_builddeb:128
#: dh_clean:150 dh_compress:214 dh_fixperms:137 dh_gencontrol:90
#: dh_install:287 dh_installchangelogs:179 dh_installcron:85 dh_installdeb:152
"B<build-indep>, B<build>, B<clean>, B<install-indep>, B<install-arch>, "
"B<install>, B<binary-arch>, B<binary-indep> et B<binary>."
-# type: textblock
-#. type: textblock
+#. type: =head1
#: dh:23
+msgid "OVERRIDE TARGETS"
+msgstr ""
+
+#. type: textblock
+#: dh:25
msgid ""
-"Commands in the B<build-indep>, B<install-indep> and B<binary-indep> "
-"sequences are passed the B<-i> option to ensure they only work on "
-"architecture independent packages, and commands in the B<build-arch>, "
-"B<install-arch> and B<binary-arch> sequences are passed the B<-a> option to "
-"ensure they only work on architecture dependent packages."
+"A F<debian/rules> file using B<dh> can override the command that is run at "
+"any step in a sequence, by defining an override target."
msgstr ""
-"Les commandes des séquences B<build-indep>, B<install-indep> et B<binary-"
-"indep> sont appelées avec l'option B<-i> pour être certain qu'elles ne "
-"s'accompliront que sur des paquets indépendants de l'architecture. "
-"Symétriquement les commandes des séquences B<build-arch>, B<install-arch> et "
-"B<binary-arch> sont appelées avec l'option B<-a> pour être certain qu'elles "
-"ne s'accompliront que sur des paquets dépendants de l'architecture."
# type: textblock
#. type: textblock
-#: dh:29
-msgid ""
-"If F<debian/rules> contains a target with a name like "
-"B<override_>I<dh_command>, then when it would normally run I<dh_command>, "
-"B<dh> will instead call that target. The override target can then run the "
-"command with additional options, or run entirely different commands instead. "
-"See examples below. (Note that to use this feature, you should Build-Depend "
-"on debhelper 7.0.50 or above.)"
+#: dh:28
+#, fuzzy
+#| msgid ""
+#| "If F<debian/rules> contains a target with a name like "
+#| "B<override_>I<dh_command>, then when it would normally run I<dh_command>, "
+#| "B<dh> will instead call that target. The override target can then run the "
+#| "command with additional options, or run entirely different commands "
+#| "instead. See examples below. (Note that to use this feature, you should "
+#| "Build-Depend on debhelper 7.0.50 or above.)"
+msgid ""
+"To override I<dh_command>, add a target named B<override_>I<dh_command> to "
+"the rules file. When it would normally run I<dh_command>, B<dh> will instead "
+"call that target. The override target can then run the command with "
+"additional options, or run entirely different commands instead. See examples "
+"below. (Note that to use this feature, you should Build-Depend on debhelper "
+"7.0.50 or above.)"
msgstr ""
"Si le fichier F<debian/rules> comporte un bloc avec un nom comme "
"B<override_>I<dh_command>, alors B<dh> exécutera ce bloc au lieu d'exécuter "
"différente. Nota : pour utiliser cette possibilité, il est nécessaire d'être "
"dépendant (Build-Depend) de la version 7.0.50 ou supérieure de debhelper."
+#. type: textblock
+#: dh:36
+msgid ""
+"Override targets can also be defined to run only when building architecture "
+"dependent or architecture independent packages. Use targets with names like "
+"B<override_>I<dh_command>B<-arch> and B<override_>I<dh_command>B<-indep>. "
+"(Note that to use this feature, you should Build-Depend on debhelper 8.9.7 "
+"or above.)"
+msgstr ""
+
# type: =head1
#. type: =head1
-#: dh:35 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31
+#: dh:43 dh_auto_build:28 dh_auto_clean:30 dh_auto_configure:31
#: dh_auto_install:43 dh_auto_test:31 dh_bugfiles:50 dh_builddeb:21
#: dh_clean:41 dh_compress:48 dh_fixperms:31 dh_gconf:39 dh_gencontrol:26
#: dh_icons:25 dh_install:54 dh_installcatalogs:49 dh_installchangelogs:56
#: dh_installcron:40 dh_installdebconf:61 dh_installdirs:31 dh_installdocs:66
#: dh_installemacsen:48 dh_installexamples:32 dh_installifupdown:39
-#: dh_installinfo:31 dh_installinit:48 dh_installlogcheck:40
+#: dh_installinfo:31 dh_installinit:48 dh_installlogcheck:42
#: dh_installlogrotate:22 dh_installman:60 dh_installmanpages:40
#: dh_installmenu:41 dh_installmime:41 dh_installmodules:44 dh_installpam:31
#: dh_installppp:35 dh_installudev:35 dh_installwm:34 dh_link:51
# type: =item
#. type: =item
-#: dh:39
+#: dh:47
msgid "B<--with> I<addon>[B<,>I<addon> ...]"
msgstr "B<--with> I<rajout>[B<,>I<rajout> ...]"
# type: textblock
#. type: textblock
-#: dh:41
+#: dh:49
msgid ""
"Add the debhelper commands specified by the given addon to appropriate "
"places in the sequence of commands that is run. This option can be repeated "
# type: =item
#. type: =item
-#: dh:48
+#: dh:56
msgid "B<--without> I<addon>"
msgstr "B<--without> I<rajout>"
# type: textblock
#. type: textblock
-#: dh:50
+#: dh:58
msgid "The inverse of B<--with>, disables using the given addon."
msgstr ""
"Le contraire de B<--with>. Désactive l'utilisation des rajouts indiqués."
# type: textblock
#. type: textblock
-#: dh:54
+#: dh:62
msgid "List all available addons."
msgstr "Liste tous les rajouts disponibles."
#. type: textblock
-#: dh:58
+#: dh:66
msgid ""
"Prints commands that would run for a given sequence, but does not run them."
msgstr ""
# type: textblock
#. type: textblock
-#: dh:62
+#: dh:70
#, fuzzy
#| msgid ""
#| "All other options passed to B<dh> are passed on to each command it runs. "
# type: =head1
#. type: =head1
-#: dh:66 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
+#: dh:74 dh_installdocs:105 dh_link:73 dh_makeshlibs:97 dh_shlibdeps:69
msgid "EXAMPLES"
msgstr "EXEMPLES"
# type: textblock
#. type: textblock
-#: dh:68
+#: dh:76
msgid ""
"To see what commands are included in a sequence, without actually doing "
"anything:"
# type: verbatim
#. type: verbatim
-#: dh:71
+#: dh:79
#, no-wrap
msgid ""
"\tdh binary-arch --no-act\n"
# type: textblock
#. type: textblock
-#: dh:73
+#: dh:81
msgid ""
"This is a very simple rules file, for packages where the default sequences "
"of commands work with no additional options."
# type: verbatim
#. type: verbatim
-#: dh:76 dh:83 dh:97 dh:110
+#: dh:84 dh:91 dh:105 dh:118
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
# type: verbatim
#. type: verbatim
-#: dh:80
+#: dh:88
#, no-wrap
msgid ""
"Often you'll want to pass an option to a specific debhelper command. The\n"
# type: verbatim
#. type: verbatim
-#: dh:87
+#: dh:95
#, no-wrap
msgid ""
"\toverride_dh_strip:\n"
# type: verbatim
#. type: verbatim
-#: dh:90
+#: dh:98
#, no-wrap
msgid ""
"\toverride_dh_installdocs:\n"
# type: textblock
#. type: textblock
-#: dh:93
+#: dh:101
msgid ""
"Sometimes the automated L<dh_auto_configure(1)> and L<dh_auto_build(1)> "
"can't guess what to do for a strange package. Here's how to avoid running "
# type: verbatim
#. type: verbatim
-#: dh:101
+#: dh:109
#, no-wrap
msgid ""
"\toverride_dh_auto_configure:\n"
# type: verbatim
#. type: verbatim
-#: dh:104
+#: dh:112
#, no-wrap
msgid ""
"\toverride_dh_auto_build:\n"
# type: textblock
#. type: textblock
-#: dh:107
+#: dh:115
msgid ""
"Another common case is wanting to do something manually before or after a "
"particular debhelper command is run."
# type: verbatim
#. type: verbatim
-#: dh:114
+#: dh:122
#, no-wrap
msgid ""
"\toverride_dh_fixperms:\n"
"\n"
#. type: textblock
-#: dh:118
+#: dh:126
msgid ""
-"Python tools are not run by dh by default, due to the continual change in "
-"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
-"Here is how to use B<dh_python2>."
+"If your package uses autotools and you want to freshen F<config.sub> and "
+"F<config.guess> with newer versions from the B<autotools-dev> package at "
+"build time, you can use some commands provided in B<autotools-dev> that "
+"automate it, like this."
msgstr ""
+"Si le paquet utilise « autotools » et que vous voulez rafraîchir les "
+"F<config.sub> et les F<config.guess> avec les nouvelles versions du paquet "
+"B<autotools-dev> lors de la compilation, il est possible d'utiliser "
+"certaines commandes fournies dans B<autotools-dev> afin d'automatiser cette "
+"tâche, comme ci-dessous :"
# type: verbatim
#. type: verbatim
-#: dh:122
-#, fuzzy, no-wrap
-#| msgid ""
-#| "\t#!/usr/bin/make -f\n"
-#| "\t%:\n"
-#| "\t\tdh $@ --with python-central\n"
-#| "\n"
+#: dh:131
+#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\t%:\n"
-"\t\tdh $@ --with python2\n"
+"\t\tdh $@ --with autotools_dev\n"
"\n"
msgstr ""
"\t#!/usr/bin/make -f\n"
"\t%:\n"
-"\t\tdh $@ --with python-central\n"
+"\t\tdh $@ --with autotools_dev\n"
"\n"
#. type: textblock
-#: dh:126
+#: dh:135
msgid ""
-"If your package uses autotools and you want to freshen F<config.sub> and "
-"F<config.guess> with newer versions from the B<autotools-dev> package at "
-"build time, you can use some commands provided in B<autotools-dev> that "
-"automate it, like this."
+"Python tools are not run by dh by default, due to the continual change in "
+"that area. (Before compatability level v9, dh does run B<dh_pysupport>.) "
+"Here is how to use B<dh_python2>."
msgstr ""
-"Si le paquet utilise « autotools » et que vous voulez rafraîchir les "
-"F<config.sub> et les F<config.guess> avec les nouvelles versions du paquet "
-"B<autotools-dev> lors de la compilation, il est possible d'utiliser "
-"certaines commandes fournies dans B<autotools-dev> afin d'automatiser cette "
-"tâche, comme ci-dessous :"
# type: verbatim
#. type: verbatim
-#: dh:131
-#, no-wrap
+#: dh:139
+#, fuzzy, no-wrap
+#| msgid ""
+#| "\t#!/usr/bin/make -f\n"
+#| "\t%:\n"
+#| "\t\tdh $@ --with python-central\n"
+#| "\n"
msgid ""
"\t#!/usr/bin/make -f\n"
"\t%:\n"
-"\t\tdh $@ --with autotools_dev\n"
+"\t\tdh $@ --with python2\n"
"\n"
msgstr ""
"\t#!/usr/bin/make -f\n"
"\t%:\n"
-"\t\tdh $@ --with autotools_dev\n"
+"\t\tdh $@ --with python-central\n"
"\n"
# type: textblock
#. type: textblock
-#: dh:135
+#: dh:143
msgid ""
"Here is how to force use of Perl's B<Module::Build> build system, which can "
"be necessary if debhelper wrongly detects that the package uses MakeMaker."
# type: verbatim
#. type: verbatim
-#: dh:139
+#: dh:147
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
# type: textblock
#. type: textblock
-#: dh:143
+#: dh:151
msgid ""
"Here is an example of overriding where the B<dh_auto_>I<*> commands find the "
"package's source, for a package where the source is located in a "
# type: verbatim
#. type: verbatim
-#: dh:147
+#: dh:155
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:151
+#: dh:159
msgid ""
"And here is an example of how to tell the B<dh_auto_>I<*> commands to build "
"in a subdirectory, which will be removed on B<clean>."
# type: verbatim
#. type: verbatim
-#: dh:154
+#: dh:162
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:158
+#: dh:166
msgid ""
"If your package can be built in parallel, you can support parallel building "
"as follows. Then B<dpkg-buildpackage -j> will work."
# type: verbatim
#. type: verbatim
-#: dh:161
+#: dh:169
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\n"
#. type: textblock
-#: dh:165
+#: dh:173
msgid ""
"Here is a way to prevent B<dh> from running several commands that you don't "
"want it to run, by defining empty override targets for each command."
# type: verbatim
#. type: verbatim
-#: dh:168 dh:179 dh:196
+#: dh:176 dh:187
#, no-wrap
msgid ""
"\t#!/usr/bin/make -f\n"
"\t\n"
#. type: verbatim
-#: dh:172
+#: dh:180
#, no-wrap
msgid ""
"\t# Commands not to run:\n"
"\n"
#. type: textblock
-#: dh:175
+#: dh:183
msgid ""
-"Sometimes, you may need to make an override target only run commands when a "
-"particular package is being built. This can be accomplished using "
-"L<dh_listpackages(1)> to test what is being built. For example:"
+"A long build process for a separate documentation package can be separated "
+"out using architecture independent overrides. These will be skipped when "
+"running build-arch and binary-arch sequences."
msgstr ""
-"Parfois, il peut être utile de substituer une commande seulement lors de la "
-"construction d'un paquet particulier. Ceci est réalisable à l'aide de "
-"L<dh_listpackages(1)> pour connaître le paquet en cours de construction. Par "
-"exemple :"
# type: verbatim
#. type: verbatim
-#: dh:183
-#, no-wrap
+#: dh:191
+#, fuzzy, no-wrap
+#| msgid ""
+#| "\toverride_dh_auto_configure:\n"
+#| "\t\t./mondoconfig\n"
+#| "\n"
msgid ""
-"\toverride_dh_fixperms:\n"
-"\t\tdh_fixperms\n"
-"\tifneq (,$(filter foo, $(shell dh_listpackages)))\n"
-"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
-"\tendif\n"
+"\toverride_dh_auto_build-indep:\n"
+"\t\t$(MAKE) -C docs\n"
"\n"
msgstr ""
-"\toverride_dh_fixperms:\n"
-"\t\tdh_fixperms\n"
-"\tifneq (,$(filter toto, $(shell dh_listpackages)))\n"
-"\t\tchmod 4755 debian/toto/usr/bin/toto\n"
-"\tendif\n"
+"\toverride_dh_auto_configure:\n"
+"\t\t./mondoconfig\n"
"\n"
-#. type: textblock
-#: dh:189
-#, fuzzy
-#| msgid ""
-#| "Finally, remember that you are not limited to using override targets in "
-#| "the rules file when using B<dh>. You can also explicitly define any of "
-#| "the regular rules file targets when it makes sense to do so. A common "
-#| "reason to do this is if your package needs different B<build-arch> and "
-#| "B<build-indep> targets. For example, a package with a long document build "
-#| "process can put it in B<build-indep> to avoid build daemons redundantly "
-#| "building the documentation."
-msgid ""
-"Finally, remember that you are not limited to using override targets in the "
-"rules file when using B<dh>. You can also explicitly define any of the "
-"regular rules file targets when it makes sense to do so. A common reason to "
-"do this is when your package needs different B<build-arch> and B<build-"
-"indep> targets. For example, a package with a long document build process "
-"can put it in B<build-indep>."
-msgstr ""
-"Enfin, n'oubliez pas que vous n'êtes pas limité à la seule substitution de "
-"blocs dans le fichier rules lors de l'utilisation de B<dh>. Vous pouvez "
-"également redéfinir explicitement les blocs standard du fichier rules "
-"lorsqu'il est logique de le faire. Une raison courante de cette démarche se "
-"présente lorsque le paquet requiert des traitements différents en B<build-"
-"arch> et en B<build-indep>. Par exemple, la génération de la documentation "
-"volumineuse d'un paquet peut être placé en B<build-indep> pour éviter que "
-"cette génération soit refaite pour chacune des architectures."
+#. type: verbatim
+#: dh:194
+#, no-wrap
+msgid ""
+"\t# No tests needed for docs\n"
+"\toverride_dh_auto_test-indep:\n"
+"\n"
+msgstr ""
+# type: verbatim
#. type: verbatim
-#: dh:200
+#: dh:197
#, fuzzy, no-wrap
#| msgid ""
-#| "\tbuild: build-arch build-indep ;\n"
-#| "\tbuild-indep:\n"
-#| "\t\t$(MAKE) docs\n"
-#| "\tbuild-arch:\n"
-#| "\t\t$(MAKE) bins\n"
+#| "\toverride_dh_installdocs:\n"
+#| "\t\tdh_installdocs README TODO\n"
#| "\n"
msgid ""
-"\tbuild-indep:\n"
-"\t\t$(MAKE) docs\n"
-"\tbuild-arch:\n"
-"\t\t$(MAKE) bins\n"
+"\toverride_dh_auto_install-indep:\n"
+"\t\t$(MAKE) -C docs install\n"
"\n"
msgstr ""
-"\tbuild: build-arch build-indep ;\n"
-"\tbuild-indep:\n"
-"\t\t$(MAKE) docs\n"
-"\tbuild-arch:\n"
-"\t\t$(MAKE) bins\n"
+"\toverride_dh_installdocs:\n"
+"\t\tdh_installdocs README TODO\n"
"\n"
#. type: textblock
-#: dh:205
+#: dh:200
msgid ""
-"Note that in the example above, dh will arrange for \"debian/rules build\" "
-"to call your build-indep and build-arch targets. You do not need to "
-"explicitly define those dependencies in the rules file when using dh with "
-"compatibility level v9. This example would be more complicated with earlier "
-"compatibility levels."
+"Adding to the example above, suppose you need to chmod a file, but only when "
+"building the architecture dependent package, as it's not present when "
+"building only documentation."
msgstr ""
+# type: verbatim
+#. type: verbatim
+#: dh:204
+#, fuzzy, no-wrap
+#| msgid ""
+#| "\toverride_dh_fixperms:\n"
+#| "\t\tdh_fixperms\n"
+#| "\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+#| "\n"
+msgid ""
+"\toverride_dh_fixperms-arch:\n"
+"\t\tdh_fixperms\n"
+"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+"\n"
+msgstr ""
+"\toverride_dh_fixperms:\n"
+"\t\tdh_fixperms\n"
+"\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+"\n"
+
#. type: =head1
-#: dh:211
+#: dh:208
msgid "INTERNALS"
msgstr "FONCTIONNEMENT INTERNE"
#. type: textblock
-#: dh:213
+#: dh:210
msgid ""
"If you're curious about B<dh>'s internals, here's how it works under the "
"hood."
# type: textblock
#. type: textblock
-#: dh:215
+#: dh:212
msgid ""
"Each debhelper command will record when it's successfully run in F<debian/"
"package.debhelper.log>. (Which B<dh_clean> deletes.) So B<dh> can tell which "
# type: textblock
#. type: textblock
-#: dh:220
+#: dh:217
msgid ""
"Each time B<dh> is run, it examines the log, and finds the last logged "
"command that is in the specified sequence. It then continues with the next "
"B<--after> et B<--remaining> permettent de modifier ce comportement."
#. type: textblock
-#: dh:225
+#: dh:222
msgid ""
"A sequence can also run dependent targets in debian/rules. For example, the "
"\"binary\" sequence runs the \"install\" target."
msgstr ""
#. type: textblock
-#: dh:228
+#: dh:225
msgid ""
"B<dh> uses the B<DH_INTERNAL_OPTIONS> environment variable to pass "
"information through to debhelper commands that are run inside override "
"d'environnement, comme son nom l'indique, est sujet à des modifications "
"permanentes."
+# type: textblock
+#. type: textblock
+#: dh:230
+msgid ""
+"Commands in the B<build-indep>, B<install-indep> and B<binary-indep> "
+"sequences are passed the B<-i> option to ensure they only work on "
+"architecture independent packages, and commands in the B<build-arch>, "
+"B<install-arch> and B<binary-arch> sequences are passed the B<-a> option to "
+"ensure they only work on architecture dependent packages."
+msgstr ""
+"Les commandes des séquences B<build-indep>, B<install-indep> et B<binary-"
+"indep> sont appelées avec l'option B<-i> pour être certain qu'elles ne "
+"s'accompliront que sur des paquets indépendants de l'architecture. "
+"Symétriquement les commandes des séquences B<build-arch>, B<install-arch> et "
+"B<binary-arch> sont appelées avec l'option B<-a> pour être certain qu'elles "
+"ne s'accompliront que sur des paquets dépendants de l'architecture."
+
#. type: =head1
-#: dh:233
+#: dh:236
msgid "DEPRECATED OPTIONS"
msgstr ""
#. type: textblock
-#: dh:235
+#: dh:238
msgid ""
"The following options are deprecated. It's much better to use override "
"targets instead."
# type: =item
#. type: =item
-#: dh:240
+#: dh:243
msgid "B<--until> I<cmd>"
msgstr "B<--until> I<commande>"
# type: textblock
#. type: textblock
-#: dh:242
+#: dh:245
#, fuzzy
#| msgid "Run commands in the sequence until and including I<cmd>, then stop."
msgid "Run commands in the sequence until and including I<cmd>, then stop."
# type: =item
#. type: =item
-#: dh:244
+#: dh:247
msgid "B<--before> I<cmd>"
msgstr "B<--before> I<commande>"
# type: textblock
#. type: textblock
-#: dh:246
+#: dh:249
#, fuzzy
#| msgid "Run commands in the sequence before I<cmd>, then stop."
msgid "Run commands in the sequence before I<cmd>, then stop."
# type: =item
#. type: =item
-#: dh:248
+#: dh:251
msgid "B<--after> I<cmd>"
msgstr "B<--after> I<commande>"
# type: textblock
#. type: textblock
-#: dh:250
+#: dh:253
#, fuzzy
#| msgid "Run commands in the sequence that come after I<cmd>."
msgid "Run commands in the sequence that come after I<cmd>."
# type: =item
#. type: =item
-#: dh:252
+#: dh:255
msgid "B<--remaining>"
msgstr "B<--remaining>"
# type: textblock
#. type: textblock
-#: dh:254
+#: dh:257
#, fuzzy
#| msgid "Run all commands in the sequence that have yet to be run."
msgid "Run all commands in the sequence that have yet to be run."
# type: textblock
#. type: textblock
-#: dh:258
+#: dh:261
msgid ""
"In the above options, I<cmd> can be a full name of a debhelper command, or a "
"substring. It'll first search for a command in the sequence exactly matching "
# type: textblock
#. type: textblock
-#: dh:860 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55
+#: dh:885 dh_auto_build:49 dh_auto_clean:52 dh_auto_configure:55
#: dh_auto_install:87 dh_auto_test:61 dh_builddeb:122 dh_clean:144
#: dh_compress:208 dh_fixperms:131 dh_gconf:101 dh_gencontrol:84
#: dh_install:281 dh_installcatalogs:118 dh_installchangelogs:173
#: dh_installcron:79 dh_installdeb:146 dh_installdebconf:128 dh_installdirs:88
#: dh_installdocs:309 dh_installemacsen:126 dh_installexamples:108
#: dh_installifupdown:71 dh_installinfo:79 dh_installinit:277
-#: dh_installlogcheck:78 dh_installlogrotate:52 dh_installman:261
+#: dh_installlogcheck:80 dh_installlogrotate:52 dh_installman:261
#: dh_installmanpages:199 dh_installmime:97 dh_installmodules:126
#: dh_installpam:61 dh_installppp:67 dh_installudev:117 dh_installwm:110
#: dh_installxfonts:89 dh_link:228 dh_listpackages:32 dh_makeshlibs:260
# type: textblock
#. type: textblock
-#: dh:862 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57
+#: dh:887 dh_auto_build:51 dh_auto_clean:54 dh_auto_configure:57
#: dh_auto_install:89 dh_auto_test:63 dh_bugfiles:128 dh_builddeb:124
#: dh_clean:146 dh_compress:210 dh_desktop:35 dh_fixperms:133 dh_gconf:103
#: dh_gencontrol:86 dh_icons:69 dh_install:283 dh_installchangelogs:175
# type: =item
#. type: =item
#: dh_installcron:44 dh_installifupdown:43 dh_installinit:104
-#: dh_installlogcheck:44 dh_installlogrotate:26 dh_installmodules:52
+#: dh_installlogcheck:46 dh_installlogrotate:26 dh_installmodules:52
#: dh_installpam:35 dh_installppp:39 dh_installudev:39
msgid "B<--name=>I<name>"
msgstr "B<--name=>I<nom>"
# type: textblock
#. type: textblock
-#: dh_installlogcheck:46
+#: dh_installlogcheck:48
#, fuzzy
#| msgid ""
#| "Look for files named F<debian/package.name.logrotate> and install them as "
# type: verbatim
#. type: verbatim
-#: dh_installlogcheck:80
+#: dh_installlogcheck:82
#, no-wrap
msgid ""
"This program is a part of debhelper.\n"
# type: textblock
#. type: textblock
-#: dh_installlogcheck:84
+#: dh_installlogcheck:86
msgid "Jon Middleton <jjm@debian.org>"
msgstr "Jon Middleton <jjm@debian.org>"
msgid "Andrew Stribblehill <ads@debian.org>"
msgstr "Andrew Stribblehill <ads@debian.org>"
+#~ msgid ""
+#~ "Sometimes, you may need to make an override target only run commands when "
+#~ "a particular package is being built. This can be accomplished using "
+#~ "L<dh_listpackages(1)> to test what is being built. For example:"
+#~ msgstr ""
+#~ "Parfois, il peut être utile de substituer une commande seulement lors de "
+#~ "la construction d'un paquet particulier. Ceci est réalisable à l'aide de "
+#~ "L<dh_listpackages(1)> pour connaître le paquet en cours de construction. "
+#~ "Par exemple :"
+
+# type: verbatim
+#~ msgid ""
+#~ "\toverride_dh_fixperms:\n"
+#~ "\t\tdh_fixperms\n"
+#~ "\tifneq (,$(filter foo, $(shell dh_listpackages)))\n"
+#~ "\t\tchmod 4755 debian/foo/usr/bin/foo\n"
+#~ "\tendif\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\toverride_dh_fixperms:\n"
+#~ "\t\tdh_fixperms\n"
+#~ "\tifneq (,$(filter toto, $(shell dh_listpackages)))\n"
+#~ "\t\tchmod 4755 debian/toto/usr/bin/toto\n"
+#~ "\tendif\n"
+#~ "\n"
+
+#, fuzzy
+#~| msgid ""
+#~| "Finally, remember that you are not limited to using override targets in "
+#~| "the rules file when using B<dh>. You can also explicitly define any of "
+#~| "the regular rules file targets when it makes sense to do so. A common "
+#~| "reason to do this is if your package needs different B<build-arch> and "
+#~| "B<build-indep> targets. For example, a package with a long document "
+#~| "build process can put it in B<build-indep> to avoid build daemons "
+#~| "redundantly building the documentation."
+#~ msgid ""
+#~ "Finally, remember that you are not limited to using override targets in "
+#~ "the rules file when using B<dh>. You can also explicitly define any of "
+#~ "the regular rules file targets when it makes sense to do so. A common "
+#~ "reason to do this is when your package needs different B<build-arch> and "
+#~ "B<build-indep> targets. For example, a package with a long document "
+#~ "build process can put it in B<build-indep>."
+#~ msgstr ""
+#~ "Enfin, n'oubliez pas que vous n'êtes pas limité à la seule substitution "
+#~ "de blocs dans le fichier rules lors de l'utilisation de B<dh>. Vous "
+#~ "pouvez également redéfinir explicitement les blocs standard du fichier "
+#~ "rules lorsqu'il est logique de le faire. Une raison courante de cette "
+#~ "démarche se présente lorsque le paquet requiert des traitements "
+#~ "différents en B<build-arch> et en B<build-indep>. Par exemple, la "
+#~ "génération de la documentation volumineuse d'un paquet peut être placé en "
+#~ "B<build-indep> pour éviter que cette génération soit refaite pour chacune "
+#~ "des architectures."
+
+#, fuzzy
+#~| msgid ""
+#~| "\tbuild: build-arch build-indep ;\n"
+#~| "\tbuild-indep:\n"
+#~| "\t\t$(MAKE) docs\n"
+#~| "\tbuild-arch:\n"
+#~| "\t\t$(MAKE) bins\n"
+#~| "\n"
+#~ msgid ""
+#~ "\tbuild-indep:\n"
+#~ "\t\t$(MAKE) docs\n"
+#~ "\tbuild-arch:\n"
+#~ "\t\t$(MAKE) bins\n"
+#~ "\n"
+#~ msgstr ""
+#~ "\tbuild: build-arch build-indep ;\n"
+#~ "\tbuild-indep:\n"
+#~ "\t\t$(MAKE) docs\n"
+#~ "\tbuild-arch:\n"
+#~ "\t\t$(MAKE) bins\n"
+#~ "\n"
+
# type: verbatim
#~ msgid ""
-#~ "To patch your package using quilt, you can tell B<dh> to use quilt's B<dh>\n"
+#~ "To patch your package using quilt, you can tell B<dh> to use quilt's "
+#~ "B<dh>\n"
#~ "sequence addons like this:\n"
#~ "\t\n"
#~ msgstr ""
projects / debhelper.git / commitdiff