--- /dev/null
+install-info --quiet --section "#SECTION#" "#SECTION#" #FILE#
--- /dev/null
+install-info --quiet #FILE#
--- /dev/null
+if [ -x /usr/sbin/update-mime ]; then update-mime; fi
--- /dev/null
+update-modules
+depmod -a
--- /dev/null
+if test -x /usr/sbin/update-xaw-wrappers; then
+ /usr/sbin/update-xaw-wrappers
+fi
--- /dev/null
+install-info --quiet --remove #FILE#
--- /dev/null
+for opts in #OPTS#; do
+ update-alternatives --quiet --remove $opts
+done
+
--- /dev/null
+perl:Depends=perl5
--- /dev/null
+#!/usr/bin/perl -w
+#
+# Reads debian/info, installs all files listed there into /usr/info
+# and puts appropriate commands into the postinst.
+
+BEGIN { push @INC, "debian", "/usr/lib/debhelper" }
+use Dh_Lib;
+init();
+
+foreach $PACKAGE (@{$dh{DOPACKAGES}}) {
+ $TMP=tmpdir($PACKAGE);
+ $file=pkgfile($PACKAGE,"info");
+
+ undef @info;
+
+ if ($file) {
+ @info=filearray($file);
+ }
+
+ if (($PACKAGE eq $dh{FIRSTPACKAGE} || $dh{PARAMS_ALL}) && @ARGV) {
+ push @info, @ARGV;
+ }
+
+ if (@info) {
+ if ( ! -d "$TMP/usr/info") {
+ doit("install","-d","$TMP/usr/info");
+ }
+ doit("cp",@info,"$TMP/usr/info");
+ doit("chmod","-R", "go=rX","$TMP/usr/info/");
+ doit("chmod","-R", "u+rw","$TMP/usr/info/");
+ }
+
+ foreach $file (@info) {
+ # Only register with install-info if this is a head file in
+ # a tree of info files.
+ if ($file=~/\.info$/ && ! $dh{NOSCRIPTS}) {
+ # Figure out what section this file goes in.
+ my $section;
+ open (IN, "<$file") || die "$file: $!";
+ while (<IN>) {
+ if (/INFO-DIR-SECTION\s+(.*)/) {
+ $section=$1;
+ last;
+ }
+ }
+ close IN;
+
+ my $fn="/usr/info/".Dh_Lib::basename($file);
+
+ if ($section ne '') {
+ autoscript($PACKAGE,"postinst","postinst-info",
+ "s/#SECTION#/$section/;s:#FILE#:$fn:");
+ }
+ else {
+ autoscript($PACKAGE,"postinst","postinst-info-nosection",
+ "s/#FILE#/$fn/");
+ }
+ autoscript($PACKAGE,"prerm","prerm-info", "s:#FILE#:$fn:");
+ }
+ }
+}
--- /dev/null
+.TH DH_INSTALLINFO 1 "" "Debhelper Commands" "Debhelper Commands"
+.SH NAME
+dh_installinfo \- install and register info files
+.SH SYNOPSIS
+.B dh_installinfo
+.I "[debhelper options] [-A] [-n] [file ...]"
+.SH "DESCRIPTION"
+dh_installinfo is a debhelper program that is responsible for installing
+info files and registering them with install-info.
+.P
+Any filenames specified as parameters will be installed into the first
+package dh_installinfo is told to act on. By default, this is the first
+binary package in debian/control, but if you use -p, -i, or -a flags, it
+will be the first package specified by those flags.
+.P
+A file named debian/package.info (debian/info may be used for the first
+binary package in debian/control) can list other files to be installed.
+.P
+dh_installinfo will automatically generate the postinst and prerm commands
+needed to interface with install-info. See
+.BR dh_installdeb (1)
+for an explanation of how this works.
+.SH OPTIONS
+.TP
+.B debhelper options
+See
+.BR debhelper (1)
+for a list of options common to all debhelper commands.
+.TP
+.B \-A, \--all
+Install all files specified by command line parameters in ALL packages
+acted on.
+.TP
+.B \-n, \--noscripts
+Do not modify postinst/prerm scripts.
+.TP
+.B file ...
+Install these info files into the first package acted on. (Or in
+all packages if -A is specified).
+.SH ENVIRONMENT
+See
+.BR debhelper (1)
+for a list of environment variables that affect all debhelper commands.
+.SH "SEE ALSO"
+.BR debhelper (1)
+.TP
+.BR install-info (8)
+.SH BUGS
+It's impossible to specify filenames with spaces or other whitespace in them
+in debian/info file. This is more a historical design flaw than a bug.
+.SH "CONFORMS TO"
+Debian policy, version 2.5.0.0
+.SH AUTHOR
+Joey Hess <joeyh@master.debian.org>
--- /dev/null
+#!/usr/bin/perl -w
+
+BEGIN { push @INC, "debian", "/usr/lib/debhelper" }
+use Dh_Lib;
+init();
+
+foreach $PACKAGE (@{$dh{DOPACKAGES}}) {
+ $TMP=tmpdir($PACKAGE);
+ $mime=pkgfile($PACKAGE,"mime");
+
+ if ($mime ne '') {
+ if (! -d "$TMP/usr/lib/mime/packages") {
+ doit("install","-d","$TMP/usr/lib/mime/packages");
+ }
+ doit("install","-p","-m644",$mime,"$TMP/usr/lib/mime/packages/$PACKAGE");
+
+ if (! $dh{NOSCRIPTS}) {
+ autoscript($PACKAGE,"postinst","postinst-mime");
+ autoscript($PACKAGE,"postrm","postrm-mime")
+ }
+ }
+}
--- /dev/null
+#!/usr/bin/perl -w
+#
+# Register modules with modutils.
+
+BEGIN { push @INC, "debian", "/usr/lib/debhelper" }
+use Dh_Lib;
+init();
+
+foreach $PACKAGE (@{$dh{DOPACKAGES}}) {
+ $TMP=tmpdir($PACKAGE);
+ $file=pkgfile($PACKAGE,"modules");
+
+ if (! -e $TMP) {
+ doit("install","-d",$TMP);
+ }
+
+ if ($file) {
+ if (! -e "$TMP/etc/modutils") {
+ doit("install","-d","$TMP/etc/modutils");
+ doit("cp","-m0644",$file,"$TMP/etc/modutils/$PACKAGE");
+ }
+
+ if (! $dh{NOSCRIPTS}) {
+ autoscript($PACKAGE,"postinst","postinst-modules","s/#PACKAGE#/$PACKAGE/");
+ autoscript($PACKAGE,"postrm","postrm-modules","s/#PACKAGE#/$PACKAGE/");
+ }
+ }
+}
--- /dev/null
+#!/usr/bin/perl -w
+#
+# Integration with debian pam system:
+#
+# If debian/pam file exists, save it to $TMP/etc/pam.d/$PACKAGE
+
+BEGIN { push @INC, "debian", "/usr/lib/debhelper" }
+use Dh_Lib;
+init();
+
+foreach $PACKAGE (@{$dh{DOPACKAGES}}) {
+ $TMP=tmpdir($PACKAGE);
+ $pam=pkgfile($PACKAGE,"pam");
+
+ if ($pam ne '') {
+ if (! -d "$TMP/etc/pam.d") {
+ doit("install","-d","$TMP/etc/pam.d");
+ }
+ doit("install","-p","-m644",$pam,"$TMP/etc/pam.d/$PACKAGE");
+ }
+}
--- /dev/null
+#!/usr/bin/perl -w
+#
+# Find dependencies on perl stuff
+# Remove .packlist files
+
+BEGIN { push @INC, "debian", "/usr/lib/debhelper" }
+use Dh_Lib;
+init();
+
+my $perl = $ENV{'PERL'} || '/usr/bin/perl';
+$version=sprintf("%.3f", $]);
+
+foreach $PACKAGE (@{$dh{DOPACKAGES}}) {
+ $TMP=tmpdir($PACKAGE);
+ $EXT=pkgext($PACKAGE);
+
+ my ($file, $v, $arch);
+ my $dep_arch = '';
+ my $dep = '';
+ my $found = 0;
+
+ # Look for perl modules and check where they are installed
+ if (-d "$TMP/usr/lib/perl5") {
+ foreach $file (split(/\n/,`find $TMP/usr/lib/perl5 -type f -name "*.pm"`)) {
+ $found++;
+ if ($file =~ m<^$TMP/usr/lib/perl5/(\d\.\d{3})/([^/]+)/>) {
+ $v = $1;
+ $arch = $2;
+ check_module_version ($v, $version);
+ $v .= '-thread' if ($arch =~ /-thread/);
+ $dep_arch = add_deps ($dep_arch, "perl-$v");
+ } elsif ($file =~ m<^$TMP/usr/lib/perl5/(\d.\d{3})/>) {
+ $v = $1;
+ check_module_version ($v, $version);
+ $dep_arch = add_deps ($dep_arch, "perl-$v");
+ }
+ }
+ }
+
+ if ($found and not $dep_arch) {
+ $dep = "perl5";
+ } elsif ($dep_arch) {
+ $dep = $dep_arch;
+ }
+
+ # Look for perl scripts
+ my ($ff, $newdep);
+ foreach $file (split(/\n/,`find $TMP -type f \\( -name "*.pl" -or -perm +111 \\)`)) {
+ $ff=`file -b $file`;
+ if ($ff =~ /perl/) {
+ $newdep = dep_from_script ($file);
+ $dep = add_deps ($dep, $newdep) if $newdep;
+ }
+ }
+
+ # Remove .packlist files and eventually some empty directories
+ if (not $dh{'K_FLAG'}) {
+ foreach $file (split(/\n/,`find $TMP -type f -name .packlist`))
+ {
+ unlink($file);
+ # Get the directory name
+ while ($file =~ s#/[^/]+$##){
+ last if (not -d $file);
+ last if (not rmdir $file);
+ }
+ }
+ }
+
+ next unless $dep;
+
+ if (-e "debian/$EXT\subtsvars") {
+ open (IN, "<debian/$EXT\subtsvars");
+ my @lines=grep { ! /^perl:Depends=/ } <IN>;
+ close IN;
+ open (OUT, ">debian/$EXT\subtsvars");
+ print OUT @lines;
+ } else {
+ open (OUT, ">debian/$EXT\subtsvars");
+ }
+ print OUT "perl:Depends=$dep\n";
+ close OUT;
+}
+
+sub add_deps {
+ my ($dep, $new) = @_;
+
+ # If $new = perl5 or perl5-thread check if perl-X.XXX(-thread)?
+ # is not already in the dependencies
+ if ($new eq "perl5") {
+ return $dep if ($dep =~ m/(^|\s)perl-5\.\d{3}(\s|,|$)/);
+ } elsif ($new eq "perl5-thread") {
+ return $dep if ($dep =~ m/(^|\s)perl-5\.\d{3}-thread(\s|,|$)/);
+ }
+
+ if (not $dep) {
+ $dep = $new;
+ } else {
+ $dep .= ", $new" unless ($dep =~ m/(^|\s)$new(\s|,|$)/);
+ }
+
+ return $dep;
+}
+
+sub check_module_version {
+ my ($v1, $v2) = @_;
+ unless ($v1 eq $v2) {
+ warning("A module has been found in perl-$v1 arch directory. But perl-$v2 is the perl currently used ...\n");
+ }
+}
+
+sub dep_from_script {
+ my $file = shift;
+ my ($line, $perl, $dep);
+ open (SCRIPT, "<$file") || die "Can't open $file: $!\n";
+ $line = <SCRIPT>;
+ close (SCRIPT);
+ if ($line =~ m<^#!\s*/usr/bin/(perl\S*)(?:\s+|$)>) {
+ $perl = $1;
+ if ($perl eq "perl") {
+ $dep = "perl5";
+ } elsif ($perl eq "perl-thread") {
+ $dep = "perl5-thread";
+ } elsif ($perl =~ m/^perl-\d\.\d{3}(?:-thread)?$/) {
+ $dep = $perl;
+ } elsif ($perl =~ m/^perl(\d\.\d{3})(\d\d)$/) {
+ # Should never happen but ...
+ $dep = "perl-$1 (=$1.$2)";
+ }
+ }
+ return $dep;
+}
--- /dev/null
+Debhelper v2 is a major new revision of debhelper. Currently, v2 is still
+being worked on, and will change in drastic ways without notice. To keep
+this from breaking packages, debhelper will continue to operate in v1
+compatability mode by default.
+
+To enable debhelper v2 features (do this with *caution*), set DH_COMPAT=2
+Here are the changes I'm planning to make to debhelper for v2, based on
+prior discussion on debian-devel.
+
+Items marked with a + are done. All others will happen as soon as I can code
+them.
+
+* Standardize on the name used for the temporary build directory of a
+ package. Currently it's debian/tmp/ for the first package and
+ debian/<package>/ for other packages of a multi-binary package. I've
+ decided after much agonizing to to use debian/<package>. The main thing this
+ has going for it is it means lots of multi-binary packages need only small
+ alterations, since they already use debian/<package> for making most of
+ thier .deb's anyway. I eliminated the other ideas for these reasons:
+ - debian/tmp/<package>: debian/tmp already has history behind it,
+ changing how it's used would be confusing.
+ - debian/build/<package>: confusing (is the code compiled there?)
+ - debian/tmp-<package>, debian/package-<tmp>: too long, little gain
+
+* dh_installmanpages will be made into a non-DWIM program, so you'll have to
+ specify all man pages to install and possibly where to put them. This may
+ look something like:
+ dh_installmanpages -x xterm.1 xfoo.1 xbar.man
+ dh_installmanpages --section=8 su.man
+ Ok, there's a _little_ DWIM left in there, it'll be smart enough to munge
+ the .man filenames properly. It'll probably just assume all man pages have
+ an extention, and delete that extentation, and add the correct one.
+
+* dh_movefiles will use a name other than debian/<package>.files for the
+ list of what to move, because it can't use debian/files for the first
+ package, since that file is already used elsewhere. It'll use
+ debian/<package>.move
+
+* dh_movefiles should delete empty directories after it's moved all files
+ out of them. (#17111)
+
+* debian/README will be installed as /usr/doc/<package>/README in native
+ packages, and as README.Debian in non-native packages. This is consistent
+ with the handing of debian/TODO and debian/changelog. (#34628)
+
+* There will be no change to the names of debhelper config files used, I've
+ decided against debian/<package>/* and the like, because although those
+ subdirs do work, they're not allowed by the packaging manual, and they'd
+ make source unpacking by hand a lot harder. I will leave these files
+ completly as they are now. However, I will remove most of the language
+ documenting that debian/<foo> works, and will deprecate that usage.
+ debian/<package>.<foo> will be preferred even in single binary packages.
+
+* Every file in etc/ will be automatically be flagged as a conffile.
+
+* Debhelper config files will support globbing via * and ?, when
+ appropriate. To turn this off and use those changarcters raw, just quote
+ them.
--- /dev/null
+#!/usr/bin/perl
+use Test;
+plan(tests => 3);
+
+# It used to not make absolute links in this situation, and it should.
+# #37774
+system("./dh_link","etc/foo","usr/lib/bar");
+ok("/etc/foo",readlink("debian/tmp/usr/lib/bar"));
+
+# let's make sure it makes simple relative links ok.
+system("./dh_link","usr/bin/foo","usr/bin/bar");
+ok("foo",readlink("debian/tmp/usr/bin/bar"));
+
+# ok, more complex relative links.
+system("./dh_link","usr/lib/1","usr/bin/2");
+ok("../lib/1",readlink("debian/tmp/usr/bin/2"));
projects / debhelper.git / commitdiff