dh_install to interoperate with dh_auto_install without needing any special
parameters.
+=item -
+
+dh_clean will read debian/clean and delete files listed there.
+
=back
=back
setup.py to install. Supports the PREFIX=/usr special case needed by
MakeMaker Makefiles. (Support for cmake and other build systems planned
but not yet implemented.)
- * New v7 mode, which only has one change from v6, and is the new
+ * New v7 mode, which only has two changes from v6, and is the new
recommended default.
* dh_install: In v7 mode, if --sourcedir is not specified, first look for
files in debian/tmp, and then will look in the current directory. This
allows dh_install to interoperate with dh_auto_install without needing any
special parameters.
+ * dh_clean: In v7 mode, read debian/clean and delete all files listed
+ therein.
* dh: New program that runs a series of debhelper commands in a sequence.
This can be used to construct very short rules files (as short as 3
lines), while still exposing the full power of debhelper when it's
It does not run "make clean" to clean up after the build process. Use
L<dh_auto_clean(1)> to do that.
+The debian/clean file can list other files to be removed.
+
=head1 OPTIONS
=over 4
if (@ARGV) {
doit("rm","-f","--",@ARGV);
}
+
+ if (!compat(6) && -e "debian/clean") {
+ my @clean=grep { ! excludefile($_) }
+ filearray("debian/clean", ".");
+ doit("rm","-f","--",@clean) if @clean;
+ }
if (! $dh{K_FLAG}) {
doit("rm","-f","debian/files")
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2008-04-23 15:36-0400\n"
+"POT-Creation-Date: 2008-04-23 21:06-0400\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
#: debhelper.pod:19
msgid ""
"A typical debian/rules file that uses debhelper will call several debhelper "
-"commands in sequence. Debhelper commands are all named with a \"dh_\" "
-"prefix. Examples of rules files that use debhelper are in "
-"F</usr/share/doc/debhelper/examples/>"
+"commands in sequence, or use L<dh(1)> to automate this process. Examples of "
+"rules files that use debhelper are in F</usr/share/doc/debhelper/examples/>"
msgstr ""
# type: textblock
-#: debhelper.pod:24
+#: debhelper.pod:23
msgid ""
"To create a new debian package using debhelper, you can just copy one of the "
"sample rules files and edit it by hand. Or you can try the dh-make package, "
msgstr ""
# type: =head1
-#: debhelper.pod:30
+#: debhelper.pod:29
msgid "DEBHELPER COMMANDS"
msgstr ""
# type: textblock
-#: debhelper.pod:32
+#: debhelper.pod:31
msgid ""
"Here is the complete list of available debhelper commands. See their man "
"pages for additional documentation."
msgstr ""
# type: textblock
-#: debhelper.pod:37
+#: debhelper.pod:36
msgid "#LIST#"
msgstr ""
# type: textblock
-#: debhelper.pod:41
+#: debhelper.pod:40
msgid ""
"If a program's name starts with \"dh_\", and the program is not on the above "
"list, then it is not part of the debhelper package, but it should still work "
msgstr ""
# type: =head1
-#: debhelper.pod:45
+#: debhelper.pod:44
msgid "DEBHELPER CONFIG FILES"
msgstr ""
# type: textblock
-#: debhelper.pod:47
+#: debhelper.pod:46
msgid ""
"Many debhelper commands make use of files in F<debian/> to control what they "
"do. Besides the common F<debian/changelog> and F<debian/control>, which are "
msgstr ""
# type: textblock
-#: debhelper.pod:54
+#: debhelper.pod:53
msgid ""
"For example, dh_installdocs uses files named debian/package.docs to list the "
"documentation files it will install. See the man pages of individual "
msgstr ""
# type: textblock
-#: debhelper.pod:61
+#: debhelper.pod:60
msgid ""
"Note that if a package is the first (or only) binary package listed in "
"debian/control, debhelper will use debian/foo if no debian/package.foo file "
msgstr ""
# type: textblock
-#: debhelper.pod:65
+#: debhelper.pod:64
msgid ""
"In some rare cases, you may want to have different versions of these files "
"for different architectures. If files named debian/package.foo.arch exist, "
msgstr ""
# type: textblock
-#: debhelper.pod:71
+#: debhelper.pod:70
msgid ""
"In many cases, these config files are used to specify various types of "
"files. Documentation or example files to install, files to move, and so on. "
msgstr ""
# type: textblock
-#: debhelper.pod:76
+#: debhelper.pod:75
msgid ""
"You can also put comments in these files; lines beginning with \"#\" are "
"ignored."
msgstr ""
# type: =head1
-#: debhelper.pod:79
+#: debhelper.pod:78
msgid "SHARED DEBHELPER OPTIONS"
msgstr ""
# type: textblock
-#: debhelper.pod:81
+#: debhelper.pod:80
msgid "The following command line options are supported by all debhelper programs."
msgstr ""
# type: =item
-#: debhelper.pod:85
+#: debhelper.pod:84
msgid "B<-v>, B<--verbose>"
msgstr ""
# type: textblock
-#: debhelper.pod:87
+#: debhelper.pod:86
msgid "Verbose mode: show all commands that modify the package build directory."
msgstr ""
# type: =item
-#: debhelper.pod:89
+#: debhelper.pod:88
msgid "B<--no-act>"
msgstr ""
# type: textblock
-#: debhelper.pod:91
+#: debhelper.pod:90
msgid ""
"Do not really do anything. If used with -v, the result is that the command "
"will output what it would have done."
msgstr ""
# type: =item
-#: debhelper.pod:94
+#: debhelper.pod:93
msgid "B<-a>, B<--arch>"
msgstr ""
# type: textblock
-#: debhelper.pod:96
+#: debhelper.pod:95
msgid "Act on all architecture dependent packages."
msgstr ""
# type: =item
-#: debhelper.pod:98
+#: debhelper.pod:97
msgid "B<-i>, B<--indep>"
msgstr ""
# type: textblock
-#: debhelper.pod:100
+#: debhelper.pod:99
msgid "Act on all architecture independent packages."
msgstr ""
# type: =item
-#: debhelper.pod:102
+#: debhelper.pod:101
msgid "B<->I<ppackage>, B<--package=>I<package>"
msgstr ""
# type: textblock
-#: debhelper.pod:104
+#: debhelper.pod:103
msgid ""
"Act on the package named \"package\". This option may be specified multiple "
"times to make debhelper operate on a given set of packages."
msgstr ""
# type: =item
-#: debhelper.pod:107
+#: debhelper.pod:106
msgid "B<-s>, B<--same-arch>"
msgstr ""
# type: textblock
-#: debhelper.pod:109
+#: debhelper.pod:108
msgid ""
"This is a smarter version of the -a flag, that is used in some rare "
"circumstances. It understands that if the control file lists \"Architecture: "
msgstr ""
# type: =item
-#: debhelper.pod:117
+#: debhelper.pod:116
msgid "B<-N>I<package>, B<--no-package=>I<package>"
msgstr ""
# type: textblock
-#: debhelper.pod:119
+#: debhelper.pod:118
msgid ""
"Do not act on the specified package even if an -a, -i, or -p option lists "
"the package as one that should be acted on."
msgstr ""
# type: =item
-#: debhelper.pod:122
+#: debhelper.pod:121
msgid "B<--ignore=>I<file>"
msgstr ""
# type: textblock
-#: debhelper.pod:124
+#: debhelper.pod:123
msgid ""
"Ignore the specified file. This can be used if debian/ contains a debhelper "
"config file that a debhelper command should not act on. Note that "
msgstr ""
# type: textblock
-#: debhelper.pod:129
+#: debhelper.pod:128
msgid ""
"For example, if upstream ships a debian/init that you don't want "
"dh_installinit to install, use --ignore=debian/init"
msgstr ""
# type: =item
-#: debhelper.pod:132
+#: debhelper.pod:131
msgid "B<-P>I<tmpdir>, B<--tmpdir=>I<tmpdir>"
msgstr ""
# type: textblock
-#: debhelper.pod:134
+#: debhelper.pod:133
msgid "Use \"tmpdir\" for package build directory. The default is debian/<package>"
msgstr ""
# type: =item
-#: debhelper.pod:136
+#: debhelper.pod:135
msgid "B<--mainpackage=>I<package>"
msgstr ""
# type: textblock
-#: debhelper.pod:138
+#: debhelper.pod:137
msgid ""
"This little-used option changes the package which debhelper considers the "
"\"main package\", that is, the first one listed in debian/control, and the "
msgstr ""
# type: =head1
-#: debhelper.pod:145
+#: debhelper.pod:144
msgid "COMMON DEBHELPER OPTIONS"
msgstr ""
# type: textblock
-#: debhelper.pod:147
+#: debhelper.pod:146
msgid ""
"The following command line options are supported by some debhelper "
"programs. See the man page of each program for a complete explanation of "
msgstr ""
# type: =item
-#: debhelper.pod:153
+#: debhelper.pod:152
msgid "B<-n>"
msgstr ""
# type: textblock
-#: debhelper.pod:155
+#: debhelper.pod:154
msgid "Do not modify postinst/postrm/etc scripts."
msgstr ""
# type: =item
-#: debhelper.pod:157 dh_compress:42 dh_makeshlibs:66 dh_md5sums:37 dh_shlibdeps:36 dh_strip:39
+#: debhelper.pod:156 dh_compress:42 dh_makeshlibs:66 dh_md5sums:37 dh_shlibdeps:36 dh_strip:39
msgid "B<-X>I<item>, B<--exclude=>I<item>"
msgstr ""
# type: textblock
-#: debhelper.pod:159
+#: debhelper.pod:158
msgid ""
"Exclude an item from processing. This option may be used multiple times, to "
"exclude more than one thing."
msgstr ""
# type: =item
-#: debhelper.pod:162 dh_compress:50 dh_installdirs:32 dh_installdocs:55 dh_installexamples:33 dh_installinfo:41 dh_installman:62 dh_link:52
+#: debhelper.pod:161 dh_compress:50 dh_installdirs:32 dh_installdocs:55 dh_installexamples:33 dh_installinfo:41 dh_installman:62 dh_link:52
msgid "B<-A>, B<--all>"
msgstr ""
# type: textblock
-#: debhelper.pod:164
+#: debhelper.pod:163
msgid ""
"Makes files or other items that are specified on the command line take "
"effect in ALL packages acted on, not just the first."
msgstr ""
# type: =head1
-#: debhelper.pod:169 dh_installcatalogs:54 dh_installdocs:87 dh_installemacsen:54 dh_installexamples:50 dh_installinfo:57 dh_installinit:99 dh_installman:79 dh_installmime:41 dh_installmodules:56 dh_installwm:51 dh_installxfonts:37 dh_movefiles:58 dh_scrollkeeper:42 dh_strip:68 dh_usrlocal:49
+#: debhelper.pod:168 dh_installcatalogs:54 dh_installdocs:87 dh_installemacsen:54 dh_installexamples:50 dh_installinfo:57 dh_installinit:99 dh_installman:79 dh_installmime:41 dh_installmodules:56 dh_installwm:51 dh_installxfonts:37 dh_movefiles:58 dh_scrollkeeper:42 dh_strip:68 dh_usrlocal:49
msgid "NOTES"
msgstr ""
# type: =head2
-#: debhelper.pod:171
+#: debhelper.pod:170
msgid "Multiple binary package support"
msgstr ""
# type: textblock
-#: debhelper.pod:173
+#: debhelper.pod:172
msgid ""
"If your source package generates more than one binary package, debhelper "
"programs will default to acting on all binary packages when run. If your "
msgstr ""
# type: textblock
-#: debhelper.pod:181
+#: debhelper.pod:180
msgid ""
"To facilitate this, as well as give you more control over which packages are "
"acted on by debhelper programs, all debhelper programs accept the B<-a>, "
"in the control file."
msgstr ""
-# type: textblock
-#: debhelper.pod:187
-msgid ""
-"See F</usr/share/doc/debhelper/examples/rules.multi> for an example of how "
-"to use this in a package that generates multiple binary packages."
-msgstr ""
-
# type: =head2
-#: debhelper.pod:190
+#: debhelper.pod:186
msgid "Automatic generation of debian install scripts"
msgstr ""
# type: textblock
-#: debhelper.pod:192
+#: debhelper.pod:188
msgid ""
"Some debhelper commands will automatically generate parts of debian "
"maintainer scripts. If you want these automatically generated things "
msgstr ""
# type: textblock
-#: debhelper.pod:199
+#: debhelper.pod:195
msgid ""
"If a script does not exist at all and debhelper needs to add something to "
"it, then debhelper will create the complete script."
msgstr ""
# type: textblock
-#: debhelper.pod:202
+#: debhelper.pod:198
msgid ""
"All debhelper commands that automatically generate code in this way let it "
"be disabled by the -n parameter (see above)."
msgstr ""
# type: textblock
-#: debhelper.pod:205
+#: debhelper.pod:201
msgid ""
"Note that the inserted code will be shell code, so you cannot directly use "
"it in a perl script. If you would like to embed it into a perl script, here "
msgstr ""
# type: verbatim
-#: debhelper.pod:210
+#: debhelper.pod:206
#, no-wrap
msgid ""
" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
msgstr ""
# type: =head2
-#: debhelper.pod:216
+#: debhelper.pod:212
msgid "Automatic generation of miscellaneous dependencies."
msgstr ""
# type: textblock
-#: debhelper.pod:218
+#: debhelper.pod:214
msgid ""
"Some debhelper commands may make the generated package need to depend on "
"some other packages. For example, if you use L<dh_installdebconf(1)>, your "
msgstr ""
# type: textblock
-#: debhelper.pod:226
+#: debhelper.pod:222
msgid ""
"All commands of this type, besides documenting what dependencies may be "
"needed on their man pages, will automatically generate a substvar called "
msgstr ""
# type: textblock
-#: debhelper.pod:231
+#: debhelper.pod:227
msgid ""
"This is entirely independent of the standard ${shlibs:Depends} generated by "
"L<dh_makeshlibs(1)>, and the ${perl:Depends} generated by L<dh_perl(1)>. "
msgstr ""
# type: =head2
-#: debhelper.pod:236
+#: debhelper.pod:232
msgid "Package build directories"
msgstr ""
# type: textblock
-#: debhelper.pod:238
+#: debhelper.pod:234
msgid ""
"By default, all debhelper programs assume that the temporary directory used "
"for assembling the tree of files in a package is debian/<package>."
msgstr ""
# type: textblock
-#: debhelper.pod:241
+#: debhelper.pod:237
msgid ""
"Sometimes, you might want to use some other temporary directory. This is "
"supported by the -P flag. For example, \"dh_installdocs -Pdebian/tmp\", will "
msgstr ""
# type: =head2
-#: debhelper.pod:249
+#: debhelper.pod:245
msgid "Debhelper compatibility levels"
msgstr ""
# type: textblock
-#: debhelper.pod:251
+#: debhelper.pod:247
msgid ""
"From time to time, major non-backwards-compatible changes need to be made to "
"debhelper, to keep it clean and well-designed as needs change and its author "
msgstr ""
# type: textblock
-#: debhelper.pod:258
+#: debhelper.pod:254
msgid ""
"Tell debhelper what compatibility level to use by writing a number to "
-"debian/compat. For example, to turn on V5 mode:"
+"debian/compat. For example, to turn on V7 mode:"
msgstr ""
# type: verbatim
-#: debhelper.pod:261
+#: debhelper.pod:257
#, no-wrap
msgid ""
-" % echo 5 > debian/compat\n"
+" % echo 7 > debian/compat\n"
"\n"
msgstr ""
# type: textblock
-#: debhelper.pod:263
+#: debhelper.pod:259
msgid ""
"Unless otherwise indicated, all debhelper documentation assumes that you are "
"using the most recent compatibility level, and in most cases does not "
msgstr ""
# type: textblock
-#: debhelper.pod:270
+#: debhelper.pod:266
msgid "These are the available compatibility levels:"
msgstr ""
# type: =item
-#: debhelper.pod:274
+#: debhelper.pod:270
msgid "V1"
msgstr ""
# type: textblock
-#: debhelper.pod:276
+#: debhelper.pod:272
msgid ""
"This is the original debhelper compatibility level, and so it is the default "
"one. In this mode, debhelper will use debian/tmp as the package tree "
msgstr ""
# type: textblock
-#: debhelper.pod:281 debhelper.pod:288 debhelper.pod:311
+#: debhelper.pod:277 debhelper.pod:284 debhelper.pod:307
msgid "This mode is deprecated."
msgstr ""
# type: =item
-#: debhelper.pod:283
+#: debhelper.pod:279
msgid "V2"
msgstr ""
# type: textblock
-#: debhelper.pod:285
+#: debhelper.pod:281
msgid ""
"In this mode, debhelper will consistently use debian/<package> as the "
"package tree directory for every package that is built."
msgstr ""
# type: =item
-#: debhelper.pod:290
+#: debhelper.pod:286
msgid "V3"
msgstr ""
# type: textblock
-#: debhelper.pod:292
+#: debhelper.pod:288
msgid "This mode works like V2, with the following additions:"
msgstr ""
# type: =item
-#: debhelper.pod:296 debhelper.pod:301 debhelper.pod:305 debhelper.pod:319 debhelper.pod:324 debhelper.pod:329 debhelper.pod:334 debhelper.pod:346 debhelper.pod:350 debhelper.pod:355 debhelper.pod:359 debhelper.pod:371 debhelper.pod:376 debhelper.pod:382 debhelper.pod:388 debhelper.pod:403
+#: debhelper.pod:292 debhelper.pod:297 debhelper.pod:301 debhelper.pod:315 debhelper.pod:320 debhelper.pod:325 debhelper.pod:330 debhelper.pod:342 debhelper.pod:346 debhelper.pod:351 debhelper.pod:355 debhelper.pod:367 debhelper.pod:372 debhelper.pod:378 debhelper.pod:384 debhelper.pod:399 debhelper.pod:406
msgid "-"
msgstr ""
# type: textblock
-#: debhelper.pod:298
+#: debhelper.pod:294
msgid ""
"Debhelper config files support globbing via * and ?, when appropriate. To "
"turn this off and use those characters raw, just prefix with a backslash."
msgstr ""
# type: textblock
-#: debhelper.pod:303
+#: debhelper.pod:299
msgid "dh_makeshlibs makes the postinst and postrm scripts call ldconfig."
msgstr ""
# type: textblock
-#: debhelper.pod:307
+#: debhelper.pod:303
msgid "Every file in etc/ is automatically flagged as a conffile by dh_installdeb."
msgstr ""
# type: =item
-#: debhelper.pod:313
+#: debhelper.pod:309
msgid "V4"
msgstr ""
# type: textblock
-#: debhelper.pod:315
+#: debhelper.pod:311
msgid "Changes from V3 are:"
msgstr ""
# type: textblock
-#: debhelper.pod:321
+#: debhelper.pod:317
msgid ""
"dh_makeshlibs -V will not include the debian part of the version number in "
"the generated dependency line in the shlibs file."
msgstr ""
# type: textblock
-#: debhelper.pod:326
+#: debhelper.pod:322
msgid ""
"You are encouraged to put the new ${misc:Depends} into debian/control to "
"supplement the ${shlibs:Depends} field."
msgstr ""
# type: textblock
-#: debhelper.pod:331
+#: debhelper.pod:327
msgid ""
"dh_fixperms will make all files in bin/ directories and in etc/init.d "
"executable."
msgstr ""
# type: textblock
-#: debhelper.pod:336
+#: debhelper.pod:332
msgid "dh_link will correct existing links to conform with policy."
msgstr ""
# type: =item
-#: debhelper.pod:340
+#: debhelper.pod:336
msgid "V5"
msgstr ""
# type: textblock
-#: debhelper.pod:342
+#: debhelper.pod:338
msgid "Changes from V4 are:"
msgstr ""
# type: textblock
-#: debhelper.pod:348
+#: debhelper.pod:344
msgid "Comments are ignored in debhelper config files."
msgstr ""
# type: textblock
-#: debhelper.pod:352
+#: debhelper.pod:348
msgid ""
"dh_strip --dbg-package now specifies the name of a package to put debugging "
"symbols in, not the packages to take the symbols from."
msgstr ""
# type: textblock
-#: debhelper.pod:357
+#: debhelper.pod:353
msgid "dh_installdocs skips installing empty files."
msgstr ""
# type: textblock
-#: debhelper.pod:361
+#: debhelper.pod:357
msgid "dh_install errors out if wildcards expand to nothing."
msgstr ""
# type: =item
-#: debhelper.pod:365
+#: debhelper.pod:361
msgid "V6"
msgstr ""
# type: textblock
-#: debhelper.pod:367
+#: debhelper.pod:363
msgid "Changes from V5 are:"
msgstr ""
# type: textblock
-#: debhelper.pod:373
+#: debhelper.pod:369
msgid ""
"Commands that generate maintainer script fragements will order the "
"fragements in reverse order for the prerm and postrm scripts."
msgstr ""
# type: textblock
-#: debhelper.pod:378
+#: debhelper.pod:374
msgid ""
"dh_installwm will install a slave manpage link for x-window-manager.1.gz, if "
"it sees the man page in usr/share/man/man1 in the package build directory."
msgstr ""
# type: textblock
-#: debhelper.pod:384
+#: debhelper.pod:380
msgid ""
"dh_builddeb did not previously delete everything matching DH_ALWAYS_EXCLUDE, "
"if it was set to a list of things to exclude, such as \"CVS:.svn:.git\". Now "
msgstr ""
# type: textblock
-#: debhelper.pod:390
+#: debhelper.pod:386
msgid ""
"dh_installman allows overwriting existing man pages in the package build "
"directory. In previous compatability levels it silently refuses to do this."
msgstr ""
# type: =item
-#: debhelper.pod:395
+#: debhelper.pod:391
msgid "V7"
msgstr ""
# type: textblock
-#: debhelper.pod:397
+#: debhelper.pod:393
msgid "This is the recommended mode of operation."
msgstr ""
# type: textblock
-#: debhelper.pod:399
+#: debhelper.pod:395
msgid "Changes from V6 are:"
msgstr ""
# type: textblock
-#: debhelper.pod:405
+#: debhelper.pod:401
msgid ""
"dh_install, if --sourcedir is not specified, will first look for files in "
"debian/tmp, and then will look in the current directory. This allows "
"parameters."
msgstr ""
+# type: textblock
+#: debhelper.pod:408
+msgid "dh_clean will read debian/clean and delete files listed there."
+msgstr ""
+
# type: =head2
#: debhelper.pod:414
msgid "Doc directory symlinks"
"Once your package uses debhelper to build, be sure to add debhelper to your "
"Build-Depends line in debian/control. You should build-depend on a version "
"of debhelper equal to (or greater than) the debhelper compatibility level "
-"your package uses. So if your package used compatibility level 6:"
+"your package uses. So if your package used compatibility level 7:"
msgstr ""
# type: verbatim
#: debhelper.pod:448
#, no-wrap
msgid ""
-" Build-Depends: debhelper (>= 6)\n"
+" Build-Depends: debhelper (>= 7)\n"
"\n"
msgstr ""
msgstr ""
# type: =head1
-#: debhelper.pod:494 dh_builddeb:85 dh_clean:109 dh_compress:189 dh_desktop:47 dh_fixperms:110 dh_gconf:90 dh_gencontrol:73 dh_installcatalogs:111 dh_installchangelogs:125 dh_installcron:61 dh_installdebconf:118 dh_installdeb:94 dh_installdirs:83 dh_installdocs:237 dh_installemacsen:109 dh_installexamples:103 dh_installinfo:103 dh_installinit:197 dh_installlogcheck:51 dh_installlogrotate:50 dh_installmanpages:197 dh_installman:249 dh_installmenu:80 dh_installmime:85 dh_installmodules:116 dh_installpam:52 dh_install:268 dh_installppp:56 dh_installwm:107 dh_installxfonts:86 dh_link:223 dh_listpackages:28 dh_makeshlibs:222 dh_md5sums:86 dh_movefiles:162 dh_perl:152 dh_python:282 dh_scrollkeeper:76 dh_shlibdeps:159 dh_strip:224 dh_suidregister:117 dh_testdir:43 dh_testroot:26 dh_testversion:74 dh_undocumented:28 dh_usrlocal:114
+#: debhelper.pod:494 dh_builddeb:85 dh_clean:116 dh_compress:189 dh_desktop:47 dh_fixperms:110 dh_gconf:90 dh_gencontrol:73 dh_installcatalogs:111 dh_installchangelogs:125 dh_installcron:61 dh_installdebconf:118 dh_installdeb:94 dh_installdirs:83 dh_installdocs:237 dh_installemacsen:109 dh_installexamples:103 dh_installinfo:103 dh_installinit:197 dh_installlogcheck:51 dh_installlogrotate:50 dh_installmanpages:197 dh_installman:249 dh_installmenu:80 dh_installmime:85 dh_installmodules:116 dh_installpam:52 dh_install:268 dh_installppp:56 dh_installwm:107 dh_installxfonts:86 dh_link:223 dh_listpackages:28 dh_makeshlibs:222 dh_md5sums:86 dh_movefiles:162 dh_perl:152 dh_python:282 dh_scrollkeeper:76 dh_shlibdeps:159 dh_strip:224 dh_suidregister:117 dh_testdir:43 dh_testroot:26 dh_testversion:74 dh_undocumented:28 dh_usrlocal:114
msgid "SEE ALSO"
msgstr ""
msgstr ""
# type: =head1
-#: debhelper.pod:508 dh_builddeb:91 dh_clean:115 dh_compress:195 dh_desktop:53 dh_fixperms:116 dh_gconf:96 dh_gencontrol:79 dh_installcatalogs:117 dh_installchangelogs:131 dh_installcron:67 dh_installdebconf:124 dh_installdeb:100 dh_installdirs:89 dh_installdocs:243 dh_installemacsen:115 dh_installexamples:109 dh_installinfo:109 dh_installinit:203 dh_installlogcheck:57 dh_installlogrotate:56 dh_installmanpages:203 dh_installman:255 dh_installmenu:88 dh_installmime:91 dh_installmodules:122 dh_installpam:58 dh_install:274 dh_installppp:62 dh_installwm:113 dh_installxfonts:92 dh_link:229 dh_listpackages:34 dh_makeshlibs:228 dh_md5sums:92 dh_movefiles:168 dh_perl:158 dh_python:288 dh_scrollkeeper:82 dh_shlibdeps:165 dh_strip:230 dh_suidregister:123 dh_testdir:49 dh_testroot:32 dh_testversion:80 dh_undocumented:34 dh_usrlocal:120
+#: debhelper.pod:508 dh_builddeb:91 dh_clean:122 dh_compress:195 dh_desktop:53 dh_fixperms:116 dh_gconf:96 dh_gencontrol:79 dh_installcatalogs:117 dh_installchangelogs:131 dh_installcron:67 dh_installdebconf:124 dh_installdeb:100 dh_installdirs:89 dh_installdocs:243 dh_installemacsen:115 dh_installexamples:109 dh_installinfo:109 dh_installinit:203 dh_installlogcheck:57 dh_installlogrotate:56 dh_installmanpages:203 dh_installman:255 dh_installmenu:88 dh_installmime:91 dh_installmodules:122 dh_installpam:58 dh_install:274 dh_installppp:62 dh_installwm:113 dh_installxfonts:92 dh_link:229 dh_listpackages:34 dh_makeshlibs:228 dh_md5sums:92 dh_movefiles:168 dh_perl:158 dh_python:288 dh_scrollkeeper:82 dh_shlibdeps:165 dh_strip:230 dh_suidregister:123 dh_testdir:49 dh_testroot:32 dh_testversion:80 dh_undocumented:34 dh_usrlocal:120
msgid "AUTHOR"
msgstr ""
# type: textblock
-#: debhelper.pod:510 dh_builddeb:93 dh_clean:117 dh_compress:197 dh_fixperms:118 dh_gencontrol:81 dh_installchangelogs:133 dh_installcron:69 dh_installdebconf:126 dh_installdeb:102 dh_installdirs:91 dh_installdocs:245 dh_installemacsen:117 dh_installexamples:111 dh_installinfo:111 dh_installinit:205 dh_installlogrotate:58 dh_installmanpages:205 dh_installman:257 dh_installmenu:90 dh_installmime:93 dh_installmodules:124 dh_installpam:60 dh_install:276 dh_installppp:64 dh_installwm:115 dh_installxfonts:94 dh_link:231 dh_listpackages:36 dh_makeshlibs:230 dh_md5sums:94 dh_movefiles:170 dh_shlibdeps:167 dh_strip:232 dh_suidregister:125 dh_testdir:51 dh_testroot:34 dh_testversion:82 dh_undocumented:36
+#: debhelper.pod:510 dh_builddeb:93 dh_clean:124 dh_compress:197 dh_fixperms:118 dh_gencontrol:81 dh_installchangelogs:133 dh_installcron:69 dh_installdebconf:126 dh_installdeb:102 dh_installdirs:91 dh_installdocs:245 dh_installemacsen:117 dh_installexamples:111 dh_installinfo:111 dh_installinit:205 dh_installlogrotate:58 dh_installmanpages:205 dh_installman:257 dh_installmenu:90 dh_installmime:93 dh_installmodules:124 dh_installpam:60 dh_install:276 dh_installppp:64 dh_installwm:115 dh_installxfonts:94 dh_link:231 dh_listpackages:36 dh_makeshlibs:230 dh_md5sums:94 dh_movefiles:170 dh_shlibdeps:167 dh_strip:232 dh_suidregister:125 dh_testdir:51 dh_testroot:34 dh_testversion:82 dh_undocumented:36
msgid "Joey Hess <joeyh@debian.org>"
msgstr ""
# type: textblock
#: dh_builddeb:5
-msgid "dh_builddeb - build debian packages"
+msgid "dh_builddeb - build debian binary packages"
msgstr ""
# type: textblock
msgstr ""
# type: =head1
-#: dh_builddeb:21 dh_clean:28 dh_compress:38 dh_fixperms:31 dh_gconf:34 dh_gencontrol:26 dh_installcatalogs:44 dh_installchangelogs:40 dh_installcron:24 dh_installdebconf:50 dh_installdirs:28 dh_installdocs:51 dh_installemacsen:35 dh_installexamples:29 dh_installinfo:37 dh_installinit:33 dh_installlogrotate:22 dh_installmanpages:40 dh_installman:58 dh_installmenu:34 dh_installmime:31 dh_installmodules:39 dh_installpam:24 dh_install:47 dh_installppp:26 dh_installwm:32 dh_link:48 dh_makeshlibs:28 dh_md5sums:28 dh_movefiles:32 dh_perl:31 dh_python:39 dh_scrollkeeper:32 dh_shlibdeps:26 dh_strip:35 dh_testdir:23 dh_testversion:34 dh_usrlocal:39
+#: dh_builddeb:21 dh_clean:30 dh_compress:38 dh_fixperms:31 dh_gconf:34 dh_gencontrol:26 dh_installcatalogs:44 dh_installchangelogs:40 dh_installcron:24 dh_installdebconf:50 dh_installdirs:28 dh_installdocs:51 dh_installemacsen:35 dh_installexamples:29 dh_installinfo:37 dh_installinit:33 dh_installlogrotate:22 dh_installmanpages:40 dh_installman:58 dh_installmenu:34 dh_installmime:31 dh_installmodules:39 dh_installpam:24 dh_install:47 dh_installppp:26 dh_installwm:32 dh_link:48 dh_makeshlibs:28 dh_md5sums:28 dh_movefiles:32 dh_perl:31 dh_python:39 dh_scrollkeeper:32 dh_shlibdeps:26 dh_strip:35 dh_testdir:23 dh_testversion:34 dh_usrlocal:39
msgid "OPTIONS"
msgstr ""
msgstr ""
# type: textblock
-#: dh_builddeb:87 dh_clean:111 dh_compress:191 dh_fixperms:112 dh_gconf:92 dh_gencontrol:75 dh_installcatalogs:113 dh_installchangelogs:127 dh_installcron:63 dh_installdebconf:120 dh_installdeb:96 dh_installdirs:85 dh_installdocs:239 dh_installemacsen:111 dh_installexamples:105 dh_installinfo:105 dh_installinit:199 dh_installlogcheck:53 dh_installlogrotate:52 dh_installmanpages:199 dh_installman:251 dh_installmime:87 dh_installmodules:118 dh_installpam:54 dh_install:270 dh_installppp:58 dh_installwm:109 dh_installxfonts:88 dh_link:225 dh_listpackages:30 dh_makeshlibs:224 dh_md5sums:88 dh_movefiles:164 dh_perl:154 dh_python:284 dh_strip:226 dh_suidregister:119 dh_testdir:45 dh_testroot:28 dh_testversion:76 dh_undocumented:30 dh_usrlocal:116
+#: dh_builddeb:87 dh_clean:118 dh_compress:191 dh_fixperms:112 dh_gconf:92 dh_gencontrol:75 dh_installcatalogs:113 dh_installchangelogs:127 dh_installcron:63 dh_installdebconf:120 dh_installdeb:96 dh_installdirs:85 dh_installdocs:239 dh_installemacsen:111 dh_installexamples:105 dh_installinfo:105 dh_installinit:199 dh_installlogcheck:53 dh_installlogrotate:52 dh_installmanpages:199 dh_installman:251 dh_installmime:87 dh_installmodules:118 dh_installpam:54 dh_install:270 dh_installppp:58 dh_installwm:109 dh_installxfonts:88 dh_link:225 dh_listpackages:30 dh_makeshlibs:224 dh_md5sums:88 dh_movefiles:164 dh_perl:154 dh_python:284 dh_strip:226 dh_suidregister:119 dh_testdir:45 dh_testroot:28 dh_testversion:76 dh_undocumented:30 dh_usrlocal:116
msgid "L<debhelper(7)>"
msgstr ""
# type: textblock
-#: dh_builddeb:89 dh_clean:113 dh_compress:193 dh_desktop:51 dh_fixperms:114 dh_gconf:94 dh_gencontrol:77 dh_installchangelogs:129 dh_installcron:65 dh_installdebconf:122 dh_installdeb:98 dh_installdirs:87 dh_installdocs:241 dh_installemacsen:113 dh_installexamples:107 dh_installinfo:107 dh_installinit:201 dh_installlogrotate:54 dh_installmanpages:201 dh_installman:253 dh_installmenu:86 dh_installmime:89 dh_installmodules:120 dh_installpam:56 dh_install:272 dh_installppp:60 dh_installwm:111 dh_installxfonts:90 dh_link:227 dh_listpackages:32 dh_makeshlibs:226 dh_md5sums:90 dh_movefiles:166 dh_perl:156 dh_python:286 dh_scrollkeeper:80 dh_shlibdeps:163 dh_strip:228 dh_suidregister:121 dh_testdir:47 dh_testroot:30 dh_testversion:78 dh_undocumented:32 dh_usrlocal:118
+#: dh_builddeb:89 dh_clean:120 dh_compress:193 dh_desktop:51 dh_fixperms:114 dh_gconf:94 dh_gencontrol:77 dh_installchangelogs:129 dh_installcron:65 dh_installdebconf:122 dh_installdeb:98 dh_installdirs:87 dh_installdocs:241 dh_installemacsen:113 dh_installexamples:107 dh_installinfo:107 dh_installinit:201 dh_installlogrotate:54 dh_installmanpages:201 dh_installman:253 dh_installmenu:86 dh_installmime:89 dh_installmodules:120 dh_installpam:56 dh_install:272 dh_installppp:60 dh_installwm:111 dh_installxfonts:90 dh_link:227 dh_listpackages:32 dh_makeshlibs:226 dh_md5sums:90 dh_movefiles:166 dh_perl:156 dh_python:286 dh_scrollkeeper:80 dh_shlibdeps:163 dh_strip:228 dh_suidregister:121 dh_testdir:47 dh_testroot:30 dh_testversion:78 dh_undocumented:32 dh_usrlocal:118
msgid "This program is a part of debhelper."
msgstr ""
"L<dh_auto_clean(1)> to do that."
msgstr ""
+# type: textblock
+#: dh_clean:28
+msgid "The debian/clean file can list other files to be removed."
+msgstr ""
+
# type: =item
-#: dh_clean:32 dh_installchangelogs:44
+#: dh_clean:34 dh_installchangelogs:44
msgid "B<-k>, B<--keep>"
msgstr ""
# type: textblock
-#: dh_clean:34
+#: dh_clean:36
msgid ""
"Do not delete debian/files. When do you want to use this? Anytime you have a "
"debian/rules that has 2 binary targets that build different .deb packages; "
msgstr ""
# type: =item
-#: dh_clean:42
+#: dh_clean:44
msgid "B<-d>, B<--dirs-only>"
msgstr ""
# type: textblock
-#: dh_clean:44
+#: dh_clean:46
msgid ""
"Only clean the package build directories, do not clean up any other files at "
"all."
msgstr ""
# type: =item
-#: dh_clean:47
+#: dh_clean:49
msgid "B<-X>I<item> B<--exclude=>I<item>"
msgstr ""
# type: textblock
-#: dh_clean:49
+#: dh_clean:51
msgid ""
"Exclude files that contain \"item\" anywhere in their filename from being "
"deleted, even if they would normally be deleted. You may use this option "
msgstr ""
# type: =item
-#: dh_clean:53 dh_compress:55 dh_installdocs:69 dh_installexamples:38 dh_installinfo:50 dh_installmanpages:44 dh_movefiles:49 dh_testdir:27
+#: dh_clean:55 dh_compress:55 dh_installdocs:69 dh_installexamples:38 dh_installinfo:50 dh_installmanpages:44 dh_movefiles:49 dh_testdir:27
msgid "I<file ...>"
msgstr ""
# type: textblock
-#: dh_clean:55
+#: dh_clean:57
msgid "Delete these files too."
msgstr ""
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2008-04-23 15:36-0400\n"
+"POT-Creation-Date: 2008-04-23 21:06-0400\n"
"PO-Revision-Date: 2005-09-18 00:11+0200\n"
"Last-Translator: Rubén Porras Campo <debian-l10n-spanish@lists.debian.org>\n"
"Language-Team: SPANISH <debian-l10n-spanish@lists.debian.org>\n"
# type: textblock
#: debhelper.pod:19
+#, fuzzy
msgid ""
"A typical debian/rules file that uses debhelper will call several debhelper "
-"commands in sequence. Debhelper commands are all named with a \"dh_\" "
-"prefix. Examples of rules files that use debhelper are in F</usr/share/doc/"
-"debhelper/examples/>"
+"commands in sequence, or use L<dh(1)> to automate this process. Examples of "
+"rules files that use debhelper are in F</usr/share/doc/debhelper/examples/>"
msgstr ""
"Un fichero debian/rules típico que use debhelper hará varias llamadas en "
"cadena a órdenes de debhelper . Las órdenes de debhelper tienen todas el "
"encontrar en F</usr/share/doc/debhelper/examples/>"
# type: textblock
-#: debhelper.pod:24
+#: debhelper.pod:23
msgid ""
"To create a new debian package using debhelper, you can just copy one of the "
"sample rules files and edit it by hand. Or you can try the dh-make package, "
"maint-guide-es)"
# type: =head1
-#: debhelper.pod:30
+#: debhelper.pod:29
msgid "DEBHELPER COMMANDS"
msgstr "ÓRDENES DE DEBHELPER"
# type: textblock
-#: debhelper.pod:32
+#: debhelper.pod:31
msgid ""
"Here is the complete list of available debhelper commands. See their man "
"pages for additional documentation."
"para más información consulte sus respectivas páginas del manual."
# type: textblock
-#: debhelper.pod:37
+#: debhelper.pod:36
msgid "#LIST#"
msgstr "#LIST#"
# type: textblock
-#: debhelper.pod:41
+#: debhelper.pod:40
msgid ""
"If a program's name starts with \"dh_\", and the program is not on the above "
"list, then it is not part of the debhelper package, but it should still work "
"como los programas descritos en está página."
# type: =head1
-#: debhelper.pod:45
+#: debhelper.pod:44
msgid "DEBHELPER CONFIG FILES"
msgstr "FICHEROS DE CONFIGURACIÓN DE DEBHELPER"
# type: textblock
-#: debhelper.pod:47
+#: debhelper.pod:46
msgid ""
"Many debhelper commands make use of files in F<debian/> to control what they "
"do. Besides the common F<debian/changelog> and F<debian/control>, which are "
"reemplazado por el paquete sobre el que se está trabajando)."
# type: textblock
-#: debhelper.pod:54
+#: debhelper.pod:53
msgid ""
"For example, dh_installdocs uses files named debian/package.docs to list the "
"documentation files it will install. See the man pages of individual "
"complicado."
# type: textblock
-#: debhelper.pod:61
+#: debhelper.pod:60
msgid ""
"Note that if a package is the first (or only) binary package listed in "
"debian/control, debhelper will use debian/foo if no debian/package.foo file "
"paquete.tal."
# type: textblock
-#: debhelper.pod:65
+#: debhelper.pod:64
#, fuzzy
msgid ""
"In some rare cases, you may want to have different versions of these files "
"generales."
# type: textblock
-#: debhelper.pod:71
+#: debhelper.pod:70
msgid ""
"In many cases, these config files are used to specify various types of "
"files. Documentation or example files to install, files to move, and so on. "
"puedes usar comodines del shell como ('?' y '*') en estos ficheros."
# type: textblock
-#: debhelper.pod:76
+#: debhelper.pod:75
msgid ""
"You can also put comments in these files; lines beginning with \"#\" are "
"ignored."
"líneas con el símbolo \"#\""
# type: =head1
-#: debhelper.pod:79
+#: debhelper.pod:78
msgid "SHARED DEBHELPER OPTIONS"
msgstr "OPCIONES COMPARTIDAS DE DEBHELPER"
# type: textblock
-#: debhelper.pod:81
+#: debhelper.pod:80
msgid ""
"The following command line options are supported by all debhelper programs."
msgstr ""
"debhelper."
# type: =item
-#: debhelper.pod:85
+#: debhelper.pod:84
msgid "B<-v>, B<--verbose>"
msgstr "B<-v>, B<--verbose>"
# type: textblock
-#: debhelper.pod:87
+#: debhelper.pod:86
msgid ""
"Verbose mode: show all commands that modify the package build directory."
msgstr ""
"construcción del paquete."
# type: =item
-#: debhelper.pod:89
+#: debhelper.pod:88
msgid "B<--no-act>"
msgstr "B<--no-act>"
# type: textblock
-#: debhelper.pod:91
+#: debhelper.pod:90
msgid ""
"Do not really do anything. If used with -v, the result is that the command "
"will output what it would have done."
"hecho."
# type: =item
-#: debhelper.pod:94
+#: debhelper.pod:93
msgid "B<-a>, B<--arch>"
msgstr "B<-a>, B<--arch>"
# type: textblock
-#: debhelper.pod:96
+#: debhelper.pod:95
msgid "Act on all architecture dependent packages."
msgstr "Actuar en todos los paquetes dependientes de la arquitectura."
# type: =item
-#: debhelper.pod:98
+#: debhelper.pod:97
msgid "B<-i>, B<--indep>"
msgstr "B<-i>, B<--indep>"
# type: textblock
-#: debhelper.pod:100
+#: debhelper.pod:99
msgid "Act on all architecture independent packages."
msgstr "Actuar en todos los paquetes independientes de la arquitectura."
# type: =item
-#: debhelper.pod:102
+#: debhelper.pod:101
msgid "B<->I<ppackage>, B<--package=>I<package>"
msgstr "B<->I<ppaquete>, B<--package=>I<paquete>"
# type: textblock
-#: debhelper.pod:104
+#: debhelper.pod:103
msgid ""
"Act on the package named \"package\". This option may be specified multiple "
"times to make debhelper operate on a given set of packages."
"paquetes."
# type: =item
-#: debhelper.pod:107
+#: debhelper.pod:106
msgid "B<-s>, B<--same-arch>"
msgstr "B<-s>, B<--same-arch>"
# type: textblock
-#: debhelper.pod:109
+#: debhelper.pod:108
msgid ""
"This is a smarter version of the -a flag, that is used in some rare "
"circumstances. It understands that if the control file lists \"Architecture: "
"dependientes de la arquitectura."
# type: =item
-#: debhelper.pod:117
+#: debhelper.pod:116
msgid "B<-N>I<package>, B<--no-package=>I<package>"
msgstr "B<-N>I<paquete>, B<--no-package=>I<paquete>"
# type: textblock
-#: debhelper.pod:119
+#: debhelper.pod:118
msgid ""
"Do not act on the specified package even if an -a, -i, or -p option lists "
"the package as one that should be acted on."
"listan este paquete como uno sobre los que se debe actuar."
# type: =item
-#: debhelper.pod:122
+#: debhelper.pod:121
#, fuzzy
msgid "B<--ignore=>I<file>"
msgstr "B<--name=>I<nombre>"
# type: textblock
-#: debhelper.pod:124
+#: debhelper.pod:123
msgid ""
"Ignore the specified file. This can be used if debian/ contains a debhelper "
"config file that a debhelper command should not act on. Note that debian/"
msgstr ""
# type: textblock
-#: debhelper.pod:129
+#: debhelper.pod:128
msgid ""
"For example, if upstream ships a debian/init that you don't want "
"dh_installinit to install, use --ignore=debian/init"
msgstr ""
# type: =item
-#: debhelper.pod:132
+#: debhelper.pod:131
msgid "B<-P>I<tmpdir>, B<--tmpdir=>I<tmpdir>"
msgstr "B<-P>I<tmpdir>, B<--tmpdir=>I<tmpdir>"
# type: textblock
-#: debhelper.pod:134
+#: debhelper.pod:133
msgid ""
"Use \"tmpdir\" for package build directory. The default is debian/<package>"
msgstr ""
"debian/<paquete>."
# type: =item
-#: debhelper.pod:136
+#: debhelper.pod:135
msgid "B<--mainpackage=>I<package>"
msgstr "B<--mainpackage=>I<paquete>"
# type: textblock
-#: debhelper.pod:138
+#: debhelper.pod:137
msgid ""
"This little-used option changes the package which debhelper considers the "
"\"main package\", that is, the first one listed in debian/control, and the "
"debian/package.tal."
# type: =head1
-#: debhelper.pod:145
+#: debhelper.pod:144
msgid "COMMON DEBHELPER OPTIONS"
msgstr "OPCIONES COMUNES DE DEBHELPER"
# type: textblock
-#: debhelper.pod:147
+#: debhelper.pod:146
msgid ""
"The following command line options are supported by some debhelper "
"programs. See the man page of each program for a complete explanation of "
"lo que hace cada una."
# type: =item
-#: debhelper.pod:153
+#: debhelper.pod:152
msgid "B<-n>"
msgstr "B<-n>"
# type: textblock
-#: debhelper.pod:155
+#: debhelper.pod:154
msgid "Do not modify postinst/postrm/etc scripts."
msgstr "No modificar los scripts postinst/postrm/etc."
# type: =item
-#: debhelper.pod:157 dh_compress:42 dh_makeshlibs:66 dh_md5sums:37
+#: debhelper.pod:156 dh_compress:42 dh_makeshlibs:66 dh_md5sums:37
#: dh_shlibdeps:36 dh_strip:39
msgid "B<-X>I<item>, B<--exclude=>I<item>"
msgstr "B<-X>I<elemento>, B<--exclude=>I<elemento>"
# type: textblock
-#: debhelper.pod:159
+#: debhelper.pod:158
msgid ""
"Exclude an item from processing. This option may be used multiple times, to "
"exclude more than one thing."
"excluir distintos elementos."
# type: =item
-#: debhelper.pod:162 dh_compress:50 dh_installdirs:32 dh_installdocs:55
+#: debhelper.pod:161 dh_compress:50 dh_installdirs:32 dh_installdocs:55
#: dh_installexamples:33 dh_installinfo:41 dh_installman:62 dh_link:52
msgid "B<-A>, B<--all>"
msgstr "B<-A>, B<--all>"
# type: textblock
-#: debhelper.pod:164
+#: debhelper.pod:163
msgid ""
"Makes files or other items that are specified on the command line take "
"effect in ALL packages acted on, not just the first."
"tengan efecto en TODOS los paquetes sobre los que actúa, no sólo el primero."
# type: =head1
-#: debhelper.pod:169 dh_installcatalogs:54 dh_installdocs:87
+#: debhelper.pod:168 dh_installcatalogs:54 dh_installdocs:87
#: dh_installemacsen:54 dh_installexamples:50 dh_installinfo:57
#: dh_installinit:99 dh_installman:79 dh_installmime:41 dh_installmodules:56
#: dh_installwm:51 dh_installxfonts:37 dh_movefiles:58 dh_scrollkeeper:42
msgstr "NOTAS"
# type: =head2
-#: debhelper.pod:171
+#: debhelper.pod:170
msgid "Multiple binary package support"
msgstr "Soporte para varios paquetes binarios"
# type: textblock
-#: debhelper.pod:173
+#: debhelper.pod:172
msgid ""
"If your source package generates more than one binary package, debhelper "
"programs will default to acting on all binary packages when run. If your "
"arquitectura en el objetivo binary-indep de debian/rules."
# type: textblock
-#: debhelper.pod:181
+#: debhelper.pod:180
msgid ""
"To facilitate this, as well as give you more control over which packages are "
"acted on by debhelper programs, all debhelper programs accept the B<-a>, B<-"
"especifica ninguno los programas de debhelper actúan por defecto en todos "
"los paquetes listados en el fichero de control."
-# type: textblock
-#: debhelper.pod:187
-msgid ""
-"See F</usr/share/doc/debhelper/examples/rules.multi> for an example of how "
-"to use this in a package that generates multiple binary packages."
-msgstr ""
-"Consulte F</usr/share/doc/debhelper/examples/rules.multi> para ver un "
-"ejemplo de como usar esto en un paquete que genera múltiples paquetes "
-"binarios."
-
# type: =head2
-#: debhelper.pod:190
+#: debhelper.pod:186
msgid "Automatic generation of debian install scripts"
msgstr "Generación automática de los scripts de instalación de debian"
# type: textblock
-#: debhelper.pod:192
+#: debhelper.pod:188
msgid ""
"Some debhelper commands will automatically generate parts of debian "
"maintainer scripts. If you want these automatically generated things "
"cualquier código auto-generado cuando ejecutes dh_installdeb."
# type: textblock
-#: debhelper.pod:199
+#: debhelper.pod:195
msgid ""
"If a script does not exist at all and debhelper needs to add something to "
"it, then debhelper will create the complete script."
"pueden deshabilitar con el parámetro -n (ver arriba)."
# type: textblock
-#: debhelper.pod:202
+#: debhelper.pod:198
msgid ""
"All debhelper commands that automatically generate code in this way let it "
"be disabled by the -n parameter (see above)."
"estamanera se pueden deshabilitar con el parámetro -n (ver arriba)."
# type: textblock
-#: debhelper.pod:205
+#: debhelper.pod:201
msgid ""
"Note that the inserted code will be shell code, so you cannot directly use "
"it in a perl script. If you would like to embed it into a perl script, here "
"$1, $2, etc están establecidas con la orden set):"
# type: verbatim
-#: debhelper.pod:210
+#: debhelper.pod:206
#, no-wrap
msgid ""
" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
"\n"
# type: =head2
-#: debhelper.pod:216
+#: debhelper.pod:212
msgid "Automatic generation of miscellaneous dependencies."
msgstr "Generación automática de diversas dependencias."
# type: textblock
-#: debhelper.pod:218
+#: debhelper.pod:214
msgid ""
"Some debhelper commands may make the generated package need to depend on "
"some other packages. For example, if you use L<dh_installdebconf(1)>, your "
"automatizarlo."
# type: textblock
-#: debhelper.pod:226
+#: debhelper.pod:222
msgid ""
"All commands of this type, besides documenting what dependencies may be "
"needed on their man pages, will automatically generate a substvar called "
"debhelper crea oportunas."
# type: textblock
-#: debhelper.pod:231
+#: debhelper.pod:227
msgid ""
"This is entirely independent of the standard ${shlibs:Depends} generated by "
"L<dh_makeshlibs(1)>, and the ${perl:Depends} generated by L<dh_perl(1)>. "
"estas variables no son correctas."
# type: =head2
-#: debhelper.pod:236
+#: debhelper.pod:232
msgid "Package build directories"
msgstr "Directorios de construcción del paquete"
# type: textblock
-#: debhelper.pod:238
+#: debhelper.pod:234
msgid ""
"By default, all debhelper programs assume that the temporary directory used "
"for assembling the tree of files in a package is debian/<package>."
"<paquete>."
# type: textblock
-#: debhelper.pod:241
+#: debhelper.pod:237
msgid ""
"Sometimes, you might want to use some other temporary directory. This is "
"supported by the -P flag. For example, \"dh_installdocs -Pdebian/tmp\", will "
"binario sobre el que debhelper actuará."
# type: =head2
-#: debhelper.pod:249
+#: debhelper.pod:245
msgid "Debhelper compatibility levels"
msgstr "Niveles de compatibilidad de debhelper"
# type: textblock
-#: debhelper.pod:251
+#: debhelper.pod:247
msgid ""
"From time to time, major non-backwards-compatible changes need to be made to "
"debhelper, to keep it clean and well-designed as needs change and its author "
"maneras."
# type: textblock
-#: debhelper.pod:258
+#: debhelper.pod:254
#, fuzzy
msgid ""
"Tell debhelper what compatibility level to use by writing a number to debian/"
-"compat. For example, to turn on V5 mode:"
+"compat. For example, to turn on V7 mode:"
msgstr ""
"Para especificar un nivel de compatibilidad debes de escribir un número en "
"debian/compat. Por ejemplo, para activar el modo V4:"
# type: verbatim
-#: debhelper.pod:261
+#: debhelper.pod:257
#, fuzzy, no-wrap
msgid ""
-" % echo 5 > debian/compat\n"
+" % echo 7 > debian/compat\n"
"\n"
msgstr ""
" % echo 4 > debian/compat\n"
"\n"
# type: textblock
-#: debhelper.pod:263
+#: debhelper.pod:259
msgid ""
"Unless otherwise indicated, all debhelper documentation assumes that you are "
"using the most recent compatibility level, and in most cases does not "
msgstr ""
# type: textblock
-#: debhelper.pod:270
+#: debhelper.pod:266
msgid "These are the available compatibility levels:"
msgstr "Los niveles de compatibilidad disponibles son:"
# type: =item
-#: debhelper.pod:274
+#: debhelper.pod:270
msgid "V1"
msgstr "V1"
# type: textblock
-#: debhelper.pod:276
+#: debhelper.pod:272
msgid ""
"This is the original debhelper compatibility level, and so it is the default "
"one. In this mode, debhelper will use debian/tmp as the package tree "
"fichero de control. Se desaconseja su uso."
# type: textblock
-#: debhelper.pod:281 debhelper.pod:288 debhelper.pod:311
+#: debhelper.pod:277 debhelper.pod:284 debhelper.pod:307
msgid "This mode is deprecated."
msgstr "Este modo está desaconsejado."
# type: =item
-#: debhelper.pod:283
+#: debhelper.pod:279
msgid "V2"
msgstr "V2"
# type: textblock
-#: debhelper.pod:285
+#: debhelper.pod:281
msgid ""
"In this mode, debhelper will consistently use debian/<package> as the "
"package tree directory for every package that is built."
"árbol de directorios para cada paquete que se construya."
# type: =item
-#: debhelper.pod:290
+#: debhelper.pod:286
msgid "V3"
msgstr "V3"
# type: textblock
-#: debhelper.pod:292
+#: debhelper.pod:288
msgid "This mode works like V2, with the following additions:"
msgstr "Este modo funciona como el V2 con los siguientes añadidos:"
# type: =item
-#: debhelper.pod:296 debhelper.pod:301 debhelper.pod:305 debhelper.pod:319
-#: debhelper.pod:324 debhelper.pod:329 debhelper.pod:334 debhelper.pod:346
-#: debhelper.pod:350 debhelper.pod:355 debhelper.pod:359 debhelper.pod:371
-#: debhelper.pod:376 debhelper.pod:382 debhelper.pod:388 debhelper.pod:403
+#: debhelper.pod:292 debhelper.pod:297 debhelper.pod:301 debhelper.pod:315
+#: debhelper.pod:320 debhelper.pod:325 debhelper.pod:330 debhelper.pod:342
+#: debhelper.pod:346 debhelper.pod:351 debhelper.pod:355 debhelper.pod:367
+#: debhelper.pod:372 debhelper.pod:378 debhelper.pod:384 debhelper.pod:399
+#: debhelper.pod:406
msgid "-"
msgstr "-"
# type: textblock
-#: debhelper.pod:298
+#: debhelper.pod:294
msgid ""
"Debhelper config files support globbing via * and ?, when appropriate. To "
"turn this off and use those characters raw, just prefix with a backslash."
"prefijo una barra invertida."
# type: textblock
-#: debhelper.pod:303
+#: debhelper.pod:299
msgid "dh_makeshlibs makes the postinst and postrm scripts call ldconfig."
msgstr ""
"dh_makeshlibs hace que los scripts postinst y postrm ejecuten ldconfig."
# type: textblock
-#: debhelper.pod:307
+#: debhelper.pod:303
msgid ""
"Every file in etc/ is automatically flagged as a conffile by dh_installdeb."
msgstr ""
"conffiles."
# type: =item
-#: debhelper.pod:313
+#: debhelper.pod:309
msgid "V4"
msgstr "V4"
# type: textblock
-#: debhelper.pod:315
+#: debhelper.pod:311
msgid "Changes from V3 are:"
msgstr ""
# type: textblock
-#: debhelper.pod:321
+#: debhelper.pod:317
msgid ""
"dh_makeshlibs -V will not include the debian part of the version number in "
"the generated dependency line in the shlibs file."
"generado en la línea de dependencias del fichero shlibs."
# type: textblock
-#: debhelper.pod:326
+#: debhelper.pod:322
msgid ""
"You are encouraged to put the new ${misc:Depends} into debian/control to "
"supplement the ${shlibs:Depends} field."
"reemplazar el campo ${shlibs:Depends}."
# type: textblock
-#: debhelper.pod:331
+#: debhelper.pod:327
msgid ""
"dh_fixperms will make all files in bin/ directories and in etc/init.d "
"executable."
"etc/init.d."
# type: textblock
-#: debhelper.pod:336
+#: debhelper.pod:332
msgid "dh_link will correct existing links to conform with policy."
msgstr ""
"dh_link corregirá los enlaces existentes para ajustarse a la política de "
"debian."
# type: =item
-#: debhelper.pod:340
+#: debhelper.pod:336
msgid "V5"
msgstr "V5"
# type: textblock
-#: debhelper.pod:342
+#: debhelper.pod:338
msgid "Changes from V4 are:"
msgstr ""
# type: textblock
-#: debhelper.pod:348
+#: debhelper.pod:344
msgid "Comments are ignored in debhelper config files."
msgstr ""
"Se ignoran los comentarios en los ficheros de configuración de debhelper."
# type: textblock
-#: debhelper.pod:352
+#: debhelper.pod:348
msgid ""
"dh_strip --dbg-package now specifies the name of a package to put debugging "
"symbols in, not the packages to take the symbols from."
"los símbolos."
# type: textblock
-#: debhelper.pod:357
+#: debhelper.pod:353
msgid "dh_installdocs skips installing empty files."
msgstr "dh_installdocs no instala ficheros vacíos."
# type: textblock
-#: debhelper.pod:361
+#: debhelper.pod:357
msgid "dh_install errors out if wildcards expand to nothing."
msgstr ""
# type: =item
-#: debhelper.pod:365
+#: debhelper.pod:361
msgid "V6"
msgstr ""
# type: textblock
-#: debhelper.pod:367
+#: debhelper.pod:363
msgid "Changes from V5 are:"
msgstr ""
# type: textblock
-#: debhelper.pod:373
+#: debhelper.pod:369
msgid ""
"Commands that generate maintainer script fragements will order the "
"fragements in reverse order for the prerm and postrm scripts."
msgstr ""
# type: textblock
-#: debhelper.pod:378
+#: debhelper.pod:374
#, fuzzy
msgid ""
"dh_installwm will install a slave manpage link for x-window-manager.1.gz, if "
msgstr "dh_installwm - registra un gestor de ventanas"
# type: textblock
-#: debhelper.pod:384
+#: debhelper.pod:380
msgid ""
"dh_builddeb did not previously delete everything matching DH_ALWAYS_EXCLUDE, "
"if it was set to a list of things to exclude, such as \"CVS:.svn:.git\". Now "
msgstr ""
# type: textblock
-#: debhelper.pod:390
+#: debhelper.pod:386
msgid ""
"dh_installman allows overwriting existing man pages in the package build "
"directory. In previous compatability levels it silently refuses to do this."
msgstr ""
# type: =item
-#: debhelper.pod:395
+#: debhelper.pod:391
msgid "V7"
msgstr ""
# type: textblock
-#: debhelper.pod:397
+#: debhelper.pod:393
#, fuzzy
msgid "This is the recommended mode of operation."
msgstr ""
"Este es el modo de operación aconsejado. Hace lo mismo que V3 y además:"
# type: textblock
-#: debhelper.pod:399
+#: debhelper.pod:395
msgid "Changes from V6 are:"
msgstr ""
# type: textblock
-#: debhelper.pod:405
+#: debhelper.pod:401
msgid ""
"dh_install, if --sourcedir is not specified, will first look for files in "
"debian/tmp, and then will look in the current directory. This allows "
"parameters."
msgstr ""
+# type: textblock
+#: debhelper.pod:408
+msgid "dh_clean will read debian/clean and delete files listed there."
+msgstr ""
+
# type: =head2
#: debhelper.pod:414
msgid "Doc directory symlinks"
"Once your package uses debhelper to build, be sure to add debhelper to your "
"Build-Depends line in debian/control. You should build-depend on a version "
"of debhelper equal to (or greater than) the debhelper compatibility level "
-"your package uses. So if your package used compatibility level 6:"
+"your package uses. So if your package used compatibility level 7:"
msgstr ""
"Una vez que su paquete usa debhelper para construirse, asegurese de añadir "
"debhelper a sus dependencias de construcción en debian/control. Debería "
#: debhelper.pod:448
#, fuzzy, no-wrap
msgid ""
-" Build-Depends: debhelper (>= 6)\n"
+" Build-Depends: debhelper (>= 7)\n"
"\n"
msgstr ""
" Build-Depends: debhelper (>= 4)\n"
"puntos, p. ej.: DH_ALWAYS_EXCLUDE=CVS:.svn"
# type: =head1
-#: debhelper.pod:494 dh_builddeb:85 dh_clean:109 dh_compress:189 dh_desktop:47
+#: debhelper.pod:494 dh_builddeb:85 dh_clean:116 dh_compress:189 dh_desktop:47
#: dh_fixperms:110 dh_gconf:90 dh_gencontrol:73 dh_installcatalogs:111
#: dh_installchangelogs:125 dh_installcron:61 dh_installdebconf:118
#: dh_installdeb:94 dh_installdirs:83 dh_installdocs:237 dh_installemacsen:109
msgstr "Web de Debhelper."
# type: =head1
-#: debhelper.pod:508 dh_builddeb:91 dh_clean:115 dh_compress:195 dh_desktop:53
+#: debhelper.pod:508 dh_builddeb:91 dh_clean:122 dh_compress:195 dh_desktop:53
#: dh_fixperms:116 dh_gconf:96 dh_gencontrol:79 dh_installcatalogs:117
#: dh_installchangelogs:131 dh_installcron:67 dh_installdebconf:124
#: dh_installdeb:100 dh_installdirs:89 dh_installdocs:243
msgstr "AUTOR"
# type: textblock
-#: debhelper.pod:510 dh_builddeb:93 dh_clean:117 dh_compress:197
+#: debhelper.pod:510 dh_builddeb:93 dh_clean:124 dh_compress:197
#: dh_fixperms:118 dh_gencontrol:81 dh_installchangelogs:133 dh_installcron:69
#: dh_installdebconf:126 dh_installdeb:102 dh_installdirs:91
#: dh_installdocs:245 dh_installemacsen:117 dh_installexamples:111
# type: textblock
#: dh_builddeb:5
-msgid "dh_builddeb - build debian packages"
+#, fuzzy
+msgid "dh_builddeb - build debian binary packages"
msgstr "dh_builddeb - construye paquetes debian"
# type: textblock
"paquetes Debian."
# type: =head1
-#: dh_builddeb:21 dh_clean:28 dh_compress:38 dh_fixperms:31 dh_gconf:34
+#: dh_builddeb:21 dh_clean:30 dh_compress:38 dh_fixperms:31 dh_gconf:34
#: dh_gencontrol:26 dh_installcatalogs:44 dh_installchangelogs:40
#: dh_installcron:24 dh_installdebconf:50 dh_installdirs:28 dh_installdocs:51
#: dh_installemacsen:35 dh_installexamples:29 dh_installinfo:37
msgstr "Pasa I<parámetros> a L<dpkg-deb(1)> cuando se construye el paquete."
# type: textblock
-#: dh_builddeb:87 dh_clean:111 dh_compress:191 dh_fixperms:112 dh_gconf:92
+#: dh_builddeb:87 dh_clean:118 dh_compress:191 dh_fixperms:112 dh_gconf:92
#: dh_gencontrol:75 dh_installcatalogs:113 dh_installchangelogs:127
#: dh_installcron:63 dh_installdebconf:120 dh_installdeb:96 dh_installdirs:85
#: dh_installdocs:239 dh_installemacsen:111 dh_installexamples:105
msgstr "L<debhelper(7)>"
# type: textblock
-#: dh_builddeb:89 dh_clean:113 dh_compress:193 dh_desktop:51 dh_fixperms:114
+#: dh_builddeb:89 dh_clean:120 dh_compress:193 dh_desktop:51 dh_fixperms:114
#: dh_gconf:94 dh_gencontrol:77 dh_installchangelogs:129 dh_installcron:65
#: dh_installdebconf:122 dh_installdeb:98 dh_installdirs:87 dh_installdocs:241
#: dh_installemacsen:113 dh_installexamples:107 dh_installinfo:107
"L<dh_auto_clean(1)> to do that."
msgstr ""
+# type: textblock
+#: dh_clean:28
+#, fuzzy
+msgid "The debian/clean file can list other files to be removed."
+msgstr ""
+"Ficheros llamados debian/paquete.info pueden listar otros ficheros a "
+"instalar."
+
# type: =item
-#: dh_clean:32 dh_installchangelogs:44
+#: dh_clean:34 dh_installchangelogs:44
msgid "B<-k>, B<--keep>"
msgstr "B<-k>, B<--keep>"
# type: textblock
-#: dh_clean:34
+#: dh_clean:36
msgid ""
"Do not delete debian/files. When do you want to use this? Anytime you have a "
"debian/rules that has 2 binary targets that build different .deb packages; "
"cambios sólo contendrán los del último paquete binario construido."
# type: =item
-#: dh_clean:42
+#: dh_clean:44
msgid "B<-d>, B<--dirs-only>"
msgstr "B<-d>, B<--dirs-only>"
# type: textblock
-#: dh_clean:44
+#: dh_clean:46
msgid ""
"Only clean the package build directories, do not clean up any other files at "
"all."
"otro tipo de ficheros en absoluto."
# type: =item
-#: dh_clean:47
+#: dh_clean:49
msgid "B<-X>I<item> B<--exclude=>I<item>"
msgstr "B<-X>I<elemento> B<--exclude=>I<elemento>"
# type: textblock
-#: dh_clean:49
+#: dh_clean:51
msgid ""
"Exclude files that contain \"item\" anywhere in their filename from being "
"deleted, even if they would normally be deleted. You may use this option "
"opción si quiere excluir una lista de ficheros."
# type: =item
-#: dh_clean:53 dh_compress:55 dh_installdocs:69 dh_installexamples:38
+#: dh_clean:55 dh_compress:55 dh_installdocs:69 dh_installexamples:38
#: dh_installinfo:50 dh_installmanpages:44 dh_movefiles:49 dh_testdir:27
msgid "I<file ...>"
msgstr "I<fichero ...>"
# type: textblock
-#: dh_clean:55
+#: dh_clean:57
msgid "Delete these files too."
msgstr "Borra también estos ficheros."
msgid "Andrew Stribblehill <ads@debian.org>"
msgstr "Andrew Stribblehill <ads@debian.org>"
+# type: textblock
+#~ msgid ""
+#~ "See F</usr/share/doc/debhelper/examples/rules.multi> for an example of "
+#~ "how to use this in a package that generates multiple binary packages."
+#~ msgstr ""
+#~ "Consulte F</usr/share/doc/debhelper/examples/rules.multi> para ver un "
+#~ "ejemplo de como usar esto en un paquete que genera múltiples paquetes "
+#~ "binarios."
+
# type: textblock
#, fuzzy
#~ msgid ""
msgid ""
msgstr ""
"Project-Id-Version: debhelper manpages\n"
-"POT-Creation-Date: 2008-04-23 15:36-0400\n"
+"POT-Creation-Date: 2008-04-23 21:06-0400\n"
"PO-Revision-Date: 2006-11-19 20:50+0100\n"
"Last-Translator: Valery Perrin <valery.perrin.debian@free.fr>\n"
"Language-Team: French <debian-l10n-french@lists.debian.org>\n"
# type: textblock
#: debhelper.pod:19
+#, fuzzy
msgid ""
"A typical debian/rules file that uses debhelper will call several debhelper "
-"commands in sequence. Debhelper commands are all named with a \"dh_\" "
-"prefix. Examples of rules files that use debhelper are in F</usr/share/doc/"
-"debhelper/examples/>"
+"commands in sequence, or use L<dh(1)> to automate this process. Examples of "
+"rules files that use debhelper are in F</usr/share/doc/debhelper/examples/>"
msgstr ""
"Un fichier debian/rules, exploitant debhelper, appelle séquentiellement des "
"commandes de debhelper. Le nom de ces commandes est préfixé par S<« dh_ »>. "
"dans F</usr/share/doc/debhelper/examples/>"
# type: textblock
-#: debhelper.pod:24
+#: debhelper.pod:23
msgid ""
"To create a new debian package using debhelper, you can just copy one of the "
"sample rules files and edit it by hand. Or you can try the dh-make package, "
"cours sur la construction d'un premier paquet avec debhelper."
# type: =head1
-#: debhelper.pod:30
+#: debhelper.pod:29
msgid "DEBHELPER COMMANDS"
msgstr "COMMANDES DE DEBHELPER"
# type: textblock
-#: debhelper.pod:32
+#: debhelper.pod:31
msgid ""
"Here is the complete list of available debhelper commands. See their man "
"pages for additional documentation."
"pages de manuel respectives pour obtenir des informations complémentaires."
# type: textblock
-#: debhelper.pod:37
+#: debhelper.pod:36
msgid "#LIST#"
msgstr "#LIST#"
# type: textblock
-#: debhelper.pod:41
+#: debhelper.pod:40
msgid ""
"If a program's name starts with \"dh_\", and the program is not on the above "
"list, then it is not part of the debhelper package, but it should still work "
"décrits dans cette page."
# type: =head1
-#: debhelper.pod:45
+#: debhelper.pod:44
msgid "DEBHELPER CONFIG FILES"
msgstr "FICHIERS DE CONFIGURATION DE DEBHELPER"
# type: textblock
-#: debhelper.pod:47
+#: debhelper.pod:46
msgid ""
"Many debhelper commands make use of files in F<debian/> to control what they "
"do. Besides the common F<debian/changelog> and F<debian/control>, which are "
"est, bien sûr, à remplacer par le nom du paquet concerné)."
# type: textblock
-#: debhelper.pod:54
+#: debhelper.pod:53
msgid ""
"For example, dh_installdocs uses files named debian/package.docs to list the "
"documentation files it will install. See the man pages of individual "
"des paires fichier/destination voire des formats légèrement plus compliqués."
# type: textblock
-#: debhelper.pod:61
+#: debhelper.pod:60
msgid ""
"Note that if a package is the first (or only) binary package listed in "
"debian/control, debhelper will use debian/foo if no debian/package.foo file "
"aucun fichier debian/paquet.toto n'est présent."
# type: textblock
-#: debhelper.pod:65
+#: debhelper.pod:64
#, fuzzy
msgid ""
"In some rare cases, you may want to have different versions of these files "
"préférence aux autres fichiers plus généraux."
# type: textblock
-#: debhelper.pod:71
+#: debhelper.pod:70
msgid ""
"In many cases, these config files are used to specify various types of "
"files. Documentation or example files to install, files to move, and so on. "
"»>)."
# type: textblock
-#: debhelper.pod:76
+#: debhelper.pod:75
msgid ""
"You can also put comments in these files; lines beginning with \"#\" are "
"ignored."
"lignes débutant par S<« # »> sont ignorées."
# type: =head1
-#: debhelper.pod:79
+#: debhelper.pod:78
msgid "SHARED DEBHELPER OPTIONS"
msgstr "OPTIONS PARTAGÉES DE DEBHELPER"
# type: textblock
-#: debhelper.pod:81
+#: debhelper.pod:80
msgid ""
"The following command line options are supported by all debhelper programs."
msgstr "Tous les programmes de debhelper acceptent les options S<suivantes :>"
# type: =item
-#: debhelper.pod:85
+#: debhelper.pod:84
msgid "B<-v>, B<--verbose>"
msgstr "B<-v>, B<--verbose>"
# type: textblock
-#: debhelper.pod:87
+#: debhelper.pod:86
msgid ""
"Verbose mode: show all commands that modify the package build directory."
msgstr ""
"de construction du paquet."
# type: =item
-#: debhelper.pod:89
+#: debhelper.pod:88
msgid "B<--no-act>"
msgstr "B<--no-act>"
# type: textblock
-#: debhelper.pod:91
+#: debhelper.pod:90
msgid ""
"Do not really do anything. If used with -v, the result is that the command "
"will output what it would have done."
"fait."
# type: =item
-#: debhelper.pod:94
+#: debhelper.pod:93
msgid "B<-a>, B<--arch>"
msgstr "B<-a>, B<--arch>"
# type: textblock
-#: debhelper.pod:96
+#: debhelper.pod:95
msgid "Act on all architecture dependent packages."
msgstr "Construit tous les paquets dépendants d'une architecture."
# type: =item
-#: debhelper.pod:98
+#: debhelper.pod:97
msgid "B<-i>, B<--indep>"
msgstr "B<-i>, B<--indep>"
# type: textblock
-#: debhelper.pod:100
+#: debhelper.pod:99
msgid "Act on all architecture independent packages."
msgstr "Construit tous les paquets indépendants de l'architecture."
# type: =item
-#: debhelper.pod:102
+#: debhelper.pod:101
msgid "B<->I<ppackage>, B<--package=>I<package>"
msgstr "B<-p>I<paquet>, B<--package=>I<paquet>"
# type: textblock
-#: debhelper.pod:104
+#: debhelper.pod:103
msgid ""
"Act on the package named \"package\". This option may be specified multiple "
"times to make debhelper operate on a given set of packages."
"de faire agir debhelper sur plusieurs paquets."
# type: =item
-#: debhelper.pod:107
+#: debhelper.pod:106
msgid "B<-s>, B<--same-arch>"
msgstr "B<-s>, B<--same-arch>"
# type: textblock
-#: debhelper.pod:109
+#: debhelper.pod:108
msgid ""
"This is a smarter version of the -a flag, that is used in some rare "
"circumstances. It understands that if the control file lists \"Architecture: "
"paquets qui ne sont pas indépendants de l'architecture."
# type: =item
-#: debhelper.pod:117
+#: debhelper.pod:116
msgid "B<-N>I<package>, B<--no-package=>I<package>"
msgstr "B<-N>I<paquet>, B<--no-package=>I<paquet>"
# type: textblock
-#: debhelper.pod:119
+#: debhelper.pod:118
msgid ""
"Do not act on the specified package even if an -a, -i, or -p option lists "
"the package as one that should be acted on."
"a, -i ou -p l'impliquait."
# type: =item
-#: debhelper.pod:122
+#: debhelper.pod:121
#, fuzzy
msgid "B<--ignore=>I<file>"
msgstr "B<--name=>I<nom>"
# type: textblock
-#: debhelper.pod:124
+#: debhelper.pod:123
msgid ""
"Ignore the specified file. This can be used if debian/ contains a debhelper "
"config file that a debhelper command should not act on. Note that debian/"
msgstr ""
# type: textblock
-#: debhelper.pod:129
+#: debhelper.pod:128
msgid ""
"For example, if upstream ships a debian/init that you don't want "
"dh_installinit to install, use --ignore=debian/init"
msgstr ""
# type: =item
-#: debhelper.pod:132
+#: debhelper.pod:131
msgid "B<-P>I<tmpdir>, B<--tmpdir=>I<tmpdir>"
msgstr "B<-P>I<tmpdir>, B<--tmpdir=>I<tmpdir>"
# type: textblock
-#: debhelper.pod:134
+#: debhelper.pod:133
msgid ""
"Use \"tmpdir\" for package build directory. The default is debian/<package>"
msgstr ""
"défaut, le répertoire utilisé est S<« debian/I<paquet> »>"
# type: =item
-#: debhelper.pod:136
+#: debhelper.pod:135
msgid "B<--mainpackage=>I<package>"
msgstr "B<--mainpackage=>I<paquet>"
# type: textblock
-#: debhelper.pod:138
+#: debhelper.pod:137
msgid ""
"This little-used option changes the package which debhelper considers the "
"\"main package\", that is, the first one listed in debian/control, and the "
"control."
# type: =head1
-#: debhelper.pod:145
+#: debhelper.pod:144
msgid "COMMON DEBHELPER OPTIONS"
msgstr "OPTIONS COURANTES DE DEBHELPER"
# type: textblock
-#: debhelper.pod:147
+#: debhelper.pod:146
msgid ""
"The following command line options are supported by some debhelper "
"programs. See the man page of each program for a complete explanation of "
"complète du rôle de ces options."
# type: =item
-#: debhelper.pod:153
+#: debhelper.pod:152
msgid "B<-n>"
msgstr "B<-n>"
# type: textblock
-#: debhelper.pod:155
+#: debhelper.pod:154
msgid "Do not modify postinst/postrm/etc scripts."
msgstr ""
"Ne pas modifier les scripts de maintenance du paquet (postinst, postrm, "
"etc.)."
# type: =item
-#: debhelper.pod:157 dh_compress:42 dh_makeshlibs:66 dh_md5sums:37
+#: debhelper.pod:156 dh_compress:42 dh_makeshlibs:66 dh_md5sums:37
#: dh_shlibdeps:36 dh_strip:39
msgid "B<-X>I<item>, B<--exclude=>I<item>"
msgstr "B<-X>I<élément>, B<--exclude=>I<élément>"
# type: textblock
-#: debhelper.pod:159
+#: debhelper.pod:158
msgid ""
"Exclude an item from processing. This option may be used multiple times, to "
"exclude more than one thing."
"plusieurs fois afin d'exclure plusieurs éléments."
# type: =item
-#: debhelper.pod:162 dh_compress:50 dh_installdirs:32 dh_installdocs:55
+#: debhelper.pod:161 dh_compress:50 dh_installdirs:32 dh_installdocs:55
#: dh_installexamples:33 dh_installinfo:41 dh_installman:62 dh_link:52
msgid "B<-A>, B<--all>"
msgstr "B<-A>, B<--all>"
# type: textblock
-#: debhelper.pod:164
+#: debhelper.pod:163
msgid ""
"Makes files or other items that are specified on the command line take "
"effect in ALL packages acted on, not just the first."
"commande concernent TOUS les paquets construits et pas seulement le premier."
# type: =head1
-#: debhelper.pod:169 dh_installcatalogs:54 dh_installdocs:87
+#: debhelper.pod:168 dh_installcatalogs:54 dh_installdocs:87
#: dh_installemacsen:54 dh_installexamples:50 dh_installinfo:57
#: dh_installinit:99 dh_installman:79 dh_installmime:41 dh_installmodules:56
#: dh_installwm:51 dh_installxfonts:37 dh_movefiles:58 dh_scrollkeeper:42
msgstr "REMARQUES"
# type: =head2
-#: debhelper.pod:171
+#: debhelper.pod:170
msgid "Multiple binary package support"
msgstr "Prise en charge de plusieurs paquets binaires"
# type: textblock
-#: debhelper.pod:173
+#: debhelper.pod:172
msgid ""
"If your source package generates more than one binary package, debhelper "
"programs will default to acting on all binary packages when run. If your "
"dans la cible binary-indep."
# type: textblock
-#: debhelper.pod:181
+#: debhelper.pod:180
msgid ""
"To facilitate this, as well as give you more control over which packages are "
"acted on by debhelper programs, all debhelper programs accept the B<-a>, B<-"
"aucune n'est précisée, les programmes de debhelper construisent tous les "
"paquets énumérés dans le fichier de contrôle."
-# type: textblock
-#: debhelper.pod:187
-msgid ""
-"See F</usr/share/doc/debhelper/examples/rules.multi> for an example of how "
-"to use this in a package that generates multiple binary packages."
-msgstr ""
-"Consulter F</usr/share/doc/debhelper/examples/rules.multi> pour avoir un "
-"exemple d'utilisation de debhelper avec un paquet qui génère des paquets "
-"binaires multiples."
-
# type: =head2
-#: debhelper.pod:190
+#: debhelper.pod:186
msgid "Automatic generation of debian install scripts"
msgstr "Génération automatique des scripts Debian de maintenance du paquet"
# type: textblock
-#: debhelper.pod:192
+#: debhelper.pod:188
msgid ""
"Some debhelper commands will automatically generate parts of debian "
"maintainer scripts. If you want these automatically generated things "
"l'exécution de dh_installdeb."
# type: textblock
-#: debhelper.pod:199
+#: debhelper.pod:195
msgid ""
"If a script does not exist at all and debhelper needs to add something to "
"it, then debhelper will create the complete script."
"quelque chose, alors debhelper créera le script de maintenance complètement."
# type: textblock
-#: debhelper.pod:202
+#: debhelper.pod:198
msgid ""
"All debhelper commands that automatically generate code in this way let it "
"be disabled by the -n parameter (see above)."
"(voir ci-dessus)."
# type: textblock
-#: debhelper.pod:205
+#: debhelper.pod:201
msgid ""
"Note that the inserted code will be shell code, so you cannot directly use "
"it in a perl script. If you would like to embed it into a perl script, here "
"la commande set.)"
# type: verbatim
-#: debhelper.pod:210
+#: debhelper.pod:206
#, no-wrap
msgid ""
" my $temp=\"set -e\\nset -- @ARGV\\n\" . << 'EOF';\n"
"\n"
# type: =head2
-#: debhelper.pod:216
+#: debhelper.pod:212
msgid "Automatic generation of miscellaneous dependencies."
msgstr "Génération automatique des diverses dépendances."
# type: textblock
-#: debhelper.pod:218
+#: debhelper.pod:214
msgid ""
"Some debhelper commands may make the generated package need to depend on "
"some other packages. For example, if you use L<dh_installdebconf(1)>, your "
"offre une solution d'automatisation."
# type: textblock
-#: debhelper.pod:226
+#: debhelper.pod:222
msgid ""
"All commands of this type, besides documenting what dependencies may be "
"needed on their man pages, will automatically generate a substvar called "
"des dépendances induites par debhelper."
# type: textblock
-#: debhelper.pod:231
+#: debhelper.pod:227
msgid ""
"This is entirely independent of the standard ${shlibs:Depends} generated by "
"L<dh_makeshlibs(1)>, and the ${perl:Depends} generated by L<dh_perl(1)>. "
"si les conjectures de debhelper ne correspondent pas la réalité."
# type: =head2
-#: debhelper.pod:236
+#: debhelper.pod:232
msgid "Package build directories"
msgstr "Répertoires de construction du paquet"
# type: textblock
-#: debhelper.pod:238
+#: debhelper.pod:234
msgid ""
"By default, all debhelper programs assume that the temporary directory used "
"for assembling the tree of files in a package is debian/<package>."
"est debian/I<paquet>."
# type: textblock
-#: debhelper.pod:241
+#: debhelper.pod:237
msgid ""
"Sometimes, you might want to use some other temporary directory. This is "
"supported by the -P flag. For example, \"dh_installdocs -Pdebian/tmp\", will "
"l'unique paquet binaire à construire."
# type: =head2
-#: debhelper.pod:249
+#: debhelper.pod:245
msgid "Debhelper compatibility levels"
msgstr "Niveaux de compatibilité de debhelper"
# type: textblock
-#: debhelper.pod:251
+#: debhelper.pod:247
msgid ""
"From time to time, major non-backwards-compatible changes need to be made to "
"debhelper, to keep it clean and well-designed as needs change and its author "
"comportement de diverses manières."
# type: textblock
-#: debhelper.pod:258
+#: debhelper.pod:254
+#, fuzzy
msgid ""
"Tell debhelper what compatibility level to use by writing a number to debian/"
-"compat. For example, to turn on V5 mode:"
+"compat. For example, to turn on V7 mode:"
msgstr ""
"Pour indiquer à debhelper le niveau de compatibilité à utiliser il faut "
"placer un nombre dans debian/compat. Par exemple, pour imposer la version "
"S<V5 :>"
# type: verbatim
-#: debhelper.pod:261
-#, no-wrap
+#: debhelper.pod:257
+#, fuzzy, no-wrap
msgid ""
-" % echo 5 > debian/compat\n"
+" % echo 7 > debian/compat\n"
"\n"
msgstr ""
" echo 5 > debian/compat\n"
"\n"
# type: textblock
-#: debhelper.pod:263
+#: debhelper.pod:259
msgid ""
"Unless otherwise indicated, all debhelper documentation assumes that you are "
"using the most recent compatibility level, and in most cases does not "
"compatibilité antérieurs."
# type: textblock
-#: debhelper.pod:270
+#: debhelper.pod:266
msgid "These are the available compatibility levels:"
msgstr "Les niveaux de compatibilité sont les S<suivants :>"
# type: =item
-#: debhelper.pod:274
+#: debhelper.pod:270
msgid "V1"
msgstr "V1"
# type: textblock
-#: debhelper.pod:276
+#: debhelper.pod:272
msgid ""
"This is the original debhelper compatibility level, and so it is the default "
"one. In this mode, debhelper will use debian/tmp as the package tree "
"et debian/I<paquet> pour tous les autres. Ce mode est déconseillé."
# type: textblock
-#: debhelper.pod:281 debhelper.pod:288 debhelper.pod:311
+#: debhelper.pod:277 debhelper.pod:284 debhelper.pod:307
msgid "This mode is deprecated."
msgstr "Ce mode est déconseillé."
# type: =item
-#: debhelper.pod:283
+#: debhelper.pod:279
msgid "V2"
msgstr "V2"
# type: textblock
-#: debhelper.pod:285
+#: debhelper.pod:281
msgid ""
"In this mode, debhelper will consistently use debian/<package> as the "
"package tree directory for every package that is built."
"répertoire de l'arborescence de chaque paquet construit."
# type: =item
-#: debhelper.pod:290
+#: debhelper.pod:286
msgid "V3"
msgstr "V3"
# type: textblock
-#: debhelper.pod:292
+#: debhelper.pod:288
msgid "This mode works like V2, with the following additions:"
msgstr "Ce mode fonctionne comme V2 mais avec les ajouts S<suivants :>"
# type: =item
-#: debhelper.pod:296 debhelper.pod:301 debhelper.pod:305 debhelper.pod:319
-#: debhelper.pod:324 debhelper.pod:329 debhelper.pod:334 debhelper.pod:346
-#: debhelper.pod:350 debhelper.pod:355 debhelper.pod:359 debhelper.pod:371
-#: debhelper.pod:376 debhelper.pod:382 debhelper.pod:388 debhelper.pod:403
+#: debhelper.pod:292 debhelper.pod:297 debhelper.pod:301 debhelper.pod:315
+#: debhelper.pod:320 debhelper.pod:325 debhelper.pod:330 debhelper.pod:342
+#: debhelper.pod:346 debhelper.pod:351 debhelper.pod:355 debhelper.pod:367
+#: debhelper.pod:372 debhelper.pod:378 debhelper.pod:384 debhelper.pod:399
+#: debhelper.pod:406
msgid "-"
msgstr "-"
# type: textblock
-#: debhelper.pod:298
+#: debhelper.pod:294
msgid ""
"Debhelper config files support globbing via * and ?, when appropriate. To "
"turn this off and use those characters raw, just prefix with a backslash."
"oblique (backslash)."
# type: textblock
-#: debhelper.pod:303
+#: debhelper.pod:299
msgid "dh_makeshlibs makes the postinst and postrm scripts call ldconfig."
msgstr ""
"Les scripts de maintenance du paquet (postinst et postrm) feront appel à "
"ldconfig quand dh_makeshlibs sera lancé."
# type: textblock
-#: debhelper.pod:307
+#: debhelper.pod:303
msgid ""
"Every file in etc/ is automatically flagged as a conffile by dh_installdeb."
msgstr ""
"fichier de configuration."
# type: =item
-#: debhelper.pod:313
+#: debhelper.pod:309
msgid "V4"
msgstr "V4"
# type: textblock
-#: debhelper.pod:315
+#: debhelper.pod:311
msgid "Changes from V3 are:"
msgstr "Les changements par rapport à la version 3 S<sont :>"
# type: textblock
-#: debhelper.pod:321
+#: debhelper.pod:317
msgid ""
"dh_makeshlibs -V will not include the debian part of the version number in "
"the generated dependency line in the shlibs file."
"ligne de dépendance produite dans le fichier shlibs."
# type: textblock
-#: debhelper.pod:326
+#: debhelper.pod:322
msgid ""
"You are encouraged to put the new ${misc:Depends} into debian/control to "
"supplement the ${shlibs:Depends} field."
"control pour compléter ${shlibs:Depends}."
# type: textblock
-#: debhelper.pod:331
+#: debhelper.pod:327
msgid ""
"dh_fixperms will make all files in bin/ directories and in etc/init.d "
"executable."
"init.d."
# type: textblock
-#: debhelper.pod:336
+#: debhelper.pod:332
msgid "dh_link will correct existing links to conform with policy."
msgstr ""
"dh_link corrigera les liens existants pour les rendre conformes à la Charte "
"Debian."
# type: =item
-#: debhelper.pod:340
+#: debhelper.pod:336
msgid "V5"
msgstr "V5"
# type: textblock
-#: debhelper.pod:342
+#: debhelper.pod:338
#, fuzzy
msgid "Changes from V4 are:"
msgstr "Les changements par rapport à la version 3 S<sont :>"
# type: textblock
-#: debhelper.pod:348
+#: debhelper.pod:344
msgid "Comments are ignored in debhelper config files."
msgstr ""
"Les commentaires sont ignorés dans les fichiers de configuration de "
"debhelper."
# type: textblock
-#: debhelper.pod:352
+#: debhelper.pod:348
msgid ""
"dh_strip --dbg-package now specifies the name of a package to put debugging "
"symbols in, not the packages to take the symbols from."
"symboles."
# type: textblock
-#: debhelper.pod:357
+#: debhelper.pod:353
msgid "dh_installdocs skips installing empty files."
msgstr "dh_installdocs saute l'installation des fichiers vides."
# type: textblock
-#: debhelper.pod:361
+#: debhelper.pod:357
msgid "dh_install errors out if wildcards expand to nothing."
msgstr ""
"dh_install génère des erreurs si les jokers (wildcards) ne correspondent à "
"rien."
# type: =item
-#: debhelper.pod:365
+#: debhelper.pod:361
msgid "V6"
msgstr ""
# type: textblock
-#: debhelper.pod:367
+#: debhelper.pod:363
#, fuzzy
msgid "Changes from V5 are:"
msgstr "Les changements par rapport à la version 3 S<sont :>"
# type: textblock
-#: debhelper.pod:373
+#: debhelper.pod:369
msgid ""
"Commands that generate maintainer script fragements will order the "
"fragements in reverse order for the prerm and postrm scripts."
msgstr ""
# type: textblock
-#: debhelper.pod:378
+#: debhelper.pod:374
#, fuzzy
msgid ""
"dh_installwm will install a slave manpage link for x-window-manager.1.gz, if "
msgstr "dh_installwm - inscrit un gestionnaire de fenêtre (window manager)"
# type: textblock
-#: debhelper.pod:384
+#: debhelper.pod:380
msgid ""
"dh_builddeb did not previously delete everything matching DH_ALWAYS_EXCLUDE, "
"if it was set to a list of things to exclude, such as \"CVS:.svn:.git\". Now "
msgstr ""
# type: textblock
-#: debhelper.pod:390
+#: debhelper.pod:386
msgid ""
"dh_installman allows overwriting existing man pages in the package build "
"directory. In previous compatability levels it silently refuses to do this."
msgstr ""
# type: =item
-#: debhelper.pod:395
+#: debhelper.pod:391
msgid "V7"
msgstr ""
# type: textblock
-#: debhelper.pod:397
+#: debhelper.pod:393
#, fuzzy
msgid "This is the recommended mode of operation."
msgstr ""
"version V4 S<plus :>"
# type: textblock
-#: debhelper.pod:399
+#: debhelper.pod:395
#, fuzzy
msgid "Changes from V6 are:"
msgstr "Les changements par rapport à la version 3 S<sont :>"
# type: textblock
-#: debhelper.pod:405
+#: debhelper.pod:401
msgid ""
"dh_install, if --sourcedir is not specified, will first look for files in "
"debian/tmp, and then will look in the current directory. This allows "
"parameters."
msgstr ""
+# type: textblock
+#: debhelper.pod:408
+msgid "dh_clean will read debian/clean and delete files listed there."
+msgstr ""
+
# type: =head2
#: debhelper.pod:414
msgid "Doc directory symlinks"
"Once your package uses debhelper to build, be sure to add debhelper to your "
"Build-Depends line in debian/control. You should build-depend on a version "
"of debhelper equal to (or greater than) the debhelper compatibility level "
-"your package uses. So if your package used compatibility level 6:"
+"your package uses. So if your package used compatibility level 7:"
msgstr ""
"Dès qu'un paquet emploie debhelper pour sa construction, il faut vérifier "
"que debhelper a bien été ajouté à la ligne build-depend dans le fichier "
#: debhelper.pod:448
#, fuzzy, no-wrap
msgid ""
-" Build-Depends: debhelper (>= 6)\n"
+" Build-Depends: debhelper (>= 7)\n"
"\n"
msgstr ""
" Build-Depends: debhelper (>= 5)\n"
"dans DH_ALWAYS_EXCLUDE=CVS:.svn"
# type: =head1
-#: debhelper.pod:494 dh_builddeb:85 dh_clean:109 dh_compress:189 dh_desktop:47
+#: debhelper.pod:494 dh_builddeb:85 dh_clean:116 dh_compress:189 dh_desktop:47
#: dh_fixperms:110 dh_gconf:90 dh_gencontrol:73 dh_installcatalogs:111
#: dh_installchangelogs:125 dh_installcron:61 dh_installdebconf:118
#: dh_installdeb:94 dh_installdirs:83 dh_installdocs:237 dh_installemacsen:109
msgstr "Le site internet de debhelper."
# type: =head1
-#: debhelper.pod:508 dh_builddeb:91 dh_clean:115 dh_compress:195 dh_desktop:53
+#: debhelper.pod:508 dh_builddeb:91 dh_clean:122 dh_compress:195 dh_desktop:53
#: dh_fixperms:116 dh_gconf:96 dh_gencontrol:79 dh_installcatalogs:117
#: dh_installchangelogs:131 dh_installcron:67 dh_installdebconf:124
#: dh_installdeb:100 dh_installdirs:89 dh_installdocs:243
msgstr "AUTEUR"
# type: textblock
-#: debhelper.pod:510 dh_builddeb:93 dh_clean:117 dh_compress:197
+#: debhelper.pod:510 dh_builddeb:93 dh_clean:124 dh_compress:197
#: dh_fixperms:118 dh_gencontrol:81 dh_installchangelogs:133 dh_installcron:69
#: dh_installdebconf:126 dh_installdeb:102 dh_installdirs:91
#: dh_installdocs:245 dh_installemacsen:117 dh_installexamples:111
# type: textblock
#: dh_builddeb:5
-msgid "dh_builddeb - build debian packages"
+#, fuzzy
+msgid "dh_builddeb - build debian binary packages"
msgstr "dh_builddeb - Construction des paquets Debian"
# type: textblock
"plusieurs paquet(s) Debian."
# type: =head1
-#: dh_builddeb:21 dh_clean:28 dh_compress:38 dh_fixperms:31 dh_gconf:34
+#: dh_builddeb:21 dh_clean:30 dh_compress:38 dh_fixperms:31 dh_gconf:34
#: dh_gencontrol:26 dh_installcatalogs:44 dh_installchangelogs:40
#: dh_installcron:24 dh_installdebconf:50 dh_installdirs:28 dh_installdocs:51
#: dh_installemacsen:35 dh_installexamples:29 dh_installinfo:37
"Fournit les I<paramètres> à L<dpkg-deb(1)> lors de la construction du paquet."
# type: textblock
-#: dh_builddeb:87 dh_clean:111 dh_compress:191 dh_fixperms:112 dh_gconf:92
+#: dh_builddeb:87 dh_clean:118 dh_compress:191 dh_fixperms:112 dh_gconf:92
#: dh_gencontrol:75 dh_installcatalogs:113 dh_installchangelogs:127
#: dh_installcron:63 dh_installdebconf:120 dh_installdeb:96 dh_installdirs:85
#: dh_installdocs:239 dh_installemacsen:111 dh_installexamples:105
msgstr "L<debhelper(7)>"
# type: textblock
-#: dh_builddeb:89 dh_clean:113 dh_compress:193 dh_desktop:51 dh_fixperms:114
+#: dh_builddeb:89 dh_clean:120 dh_compress:193 dh_desktop:51 dh_fixperms:114
#: dh_gconf:94 dh_gencontrol:77 dh_installchangelogs:129 dh_installcron:65
#: dh_installdebconf:122 dh_installdeb:98 dh_installdirs:87 dh_installdocs:241
#: dh_installemacsen:113 dh_installexamples:107 dh_installinfo:107
"L<dh_auto_clean(1)> to do that."
msgstr ""
+# type: textblock
+#: dh_clean:28
+#, fuzzy
+msgid "The debian/clean file can list other files to be removed."
+msgstr ""
+"Des fichiers nommés debian/paquet.info peuvent indiquer d'autres fichiers à "
+"installer."
+
# type: =item
-#: dh_clean:32 dh_installchangelogs:44
+#: dh_clean:34 dh_installchangelogs:44
msgid "B<-k>, B<--keep>"
msgstr "B<-k>, B<--keep>"
# type: textblock
-#: dh_clean:34
+#: dh_clean:36
msgid ""
"Do not delete debian/files. When do you want to use this? Anytime you have a "
"debian/rules that has 2 binary targets that build different .deb packages; "
"ne contiendrait que le dernier paquet binaire construit."
# type: =item
-#: dh_clean:42
+#: dh_clean:44
msgid "B<-d>, B<--dirs-only>"
msgstr "B<-d>, B<--dirs-only>"
# type: textblock
-#: dh_clean:44
+#: dh_clean:46
msgid ""
"Only clean the package build directories, do not clean up any other files at "
"all."
"autre fichier."
# type: =item
-#: dh_clean:47
+#: dh_clean:49
msgid "B<-X>I<item> B<--exclude=>I<item>"
msgstr "B<-X>I<élément> B<--exclude=>I<élément>"
# type: textblock
-#: dh_clean:49
+#: dh_clean:51
msgid ""
"Exclude files that contain \"item\" anywhere in their filename from being "
"deleted, even if they would normally be deleted. You may use this option "
"d'éléments."
# type: =item
-#: dh_clean:53 dh_compress:55 dh_installdocs:69 dh_installexamples:38
+#: dh_clean:55 dh_compress:55 dh_installdocs:69 dh_installexamples:38
#: dh_installinfo:50 dh_installmanpages:44 dh_movefiles:49 dh_testdir:27
msgid "I<file ...>"
msgstr "I<fichier ...>"
# type: textblock
-#: dh_clean:55
+#: dh_clean:57
msgid "Delete these files too."
msgstr "Supprime également les fichiers listés."
msgid "Andrew Stribblehill <ads@debian.org>"
msgstr "Andrew Stribblehill <ads@debian.org>"
+# type: textblock
+#~ msgid ""
+#~ "See F</usr/share/doc/debhelper/examples/rules.multi> for an example of "
+#~ "how to use this in a package that generates multiple binary packages."
+#~ msgstr ""
+#~ "Consulter F</usr/share/doc/debhelper/examples/rules.multi> pour avoir un "
+#~ "exemple d'utilisation de debhelper avec un paquet qui génère des paquets "
+#~ "binaires multiples."
+
# type: textblock
#~ msgid ""
#~ "Note that the directory given should be the complete or relative path to "
projects / debhelper.git / commitdiff