--- /dev/null
+$Id: AUTHORS,v 1.6 2003/06/03 06:24:54 dnelson Exp $
+
+SpamAssassin Sendmail Mail Filter (Milter) Plugin
+-------------------------------------------------
+
+Current Maintainer:
+ Dan Nelson <dnelson@allantgroup.com>
+
+
+Authors:
+ Georg C. F. Greve <greve@gnu.org>
+ Michael Brown <michaelb@opentext.com>
+ Dan Nelson <dnelson@allantgroup.com>
+
+
+Bugfixes/reports contributed by:
+ Michael Brown <michaelb@opentext.com>
+ Mikhail Teterin <mi@corbulon.video-collage.com>
+ Patrick Monnerat <pm@datasphere.ch>
+ Simon Josefsson <jas@extundo.com>
+ Ronan Waide <waider+savannah@waider.ie>
+ Nigel Horne <njh@bandsman.co.uk>
+ Jean-Gabriel Dick <Jean-Gabriel.Dick@curie.fr>
--- /dev/null
+2005-02-05 01:34 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am:
+
+ - new code to upload distfile and sigs to savannah's goofy ftp staging
+ area
+
+ - add mdoc2man.awk to the distfile
+
+2005-02-05 01:03 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Fix some unused-variable warnings when not on FreeBSD. The hack will
+ go away in the next release, since the bug has been fixed.
+
+2005-02-04 13:25 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am:
+
+ More automake cleanup cleanup.
+
+2005-02-04 12:55 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS, configure.in:
+
+ Version 0.3.0
+
+2004-11-05 10:26 Dan Nelson <dnelson@allantgroup.com>
+
+ * autogen.sh:
+
+ update comment
+
+2004-10-29 10:56 Dan Nelson <dnelson@allantgroup.com>
+
+ * autogen.sh:
+
+ check for automake 1.9
+
+2004-09-23 23:42 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ When reading headers from spamc's output, strip a trailing CR from the
+ line. if it exists.
+
+2004-09-23 15:28 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in:
+
+ Unlikely that this is doing any good
+
+2004-09-23 15:27 Dan Nelson <dnelson@allantgroup.com>
+
+ * TODO:
+
+ ranges
+
+2004-09-22 11:24 Dan Nelson <dnelson@allantgroup.com>
+
+ * TODO:
+
+ more stuff to do
+
+2004-09-21 16:06 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS:
+
+ fix crash on fork failure
+
+2004-09-21 16:04 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Make sure variables are set in the constructor in the same order they
+ appear in the header.
+
+2004-09-21 15:51 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.h:
+
+ Make a note that some variables should be collapsed into one
+
+2004-09-21 15:49 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ If a fork fails at the right time, "running" may be set when pid=-1.
+ This can be very bad when the cleanup routine runs kill(pid, SIGKILL).
+
+2004-09-06 20:19 Dan Nelson <dnelson@allantgroup.com>
+
+ * ac_cxx_exceptions.m4, ac_cxx_namespaces.m4,
+ ac_cxx_verbose_terminate_handler.m4:
+
+ Update ac-archive scripts and add upstream version ids
+
+2004-09-06 20:12 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS:
+
+ note that we support SA 3.0
+
+2004-09-06 20:02 Dan Nelson <dnelson@allantgroup.com>
+
+ * ac_acx_pthread.m4:
+
+ Update to v1.10
+
+2004-08-26 13:01 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ When extracting the score, check for "score=###" as well as "hits=###"
+
+2004-07-28 21:15 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ I have no idea how gcc allowed this to compile.
+
+2004-07-16 16:46 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ In local_user, stop at the first "+" or "@", so we can handle
+ user+detail addresses correctly. Something similar should be done for
+ full_user but that's a bit more complicated.
+
+2004-07-06 12:42 Dan Nelson <dnelson@allantgroup.com>
+
+ * contrib/spamass-milter-suse.rc:
+
+ Another Linux startup script, this time for SUSE.
+
+2004-07-01 18:02 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in:
+
+ more inline prevention
+
+2004-06-03 21:50 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Don't segfault if we can't fetch the _ and j macros.
+
+2004-05-19 10:00 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Misc C++ cleanups courtesy Jeremy Lin, plus a fix for Linux's ps
+ showing blanks in the arguments to -i and -d.
+
+2004-05-13 16:50 Dan Nelson <dnelson@allantgroup.com>
+
+ * ac_pike_compiler_flag.m4, autogen.sh:
+
+ Support automake 1.8
+
+2004-05-13 16:43 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Adjust output of generated Received: header to more closely match
+ sendmail's output. Spamassassin is very picky about parsing it. Fixes
+ savannah bug 6970 and patch 3051.
+
+ Also convert all "RCPT TO" commands to X-Envelope-To: headers, not just
+ the first one. This may have prevented whitelist checks from applying
+ to all recipients.
+
+2004-05-10 13:59 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Don't use asprintf to expand aliases, since we also use 'buf' to read
+ the results of the popen. Just set a 1024-char buffer, and anyone with
+ an email address longer than that loses.
+
+2004-04-20 10:28 Dan Nelson <dnelson@allantgroup.com>
+
+ * autogen.sh:
+
+ Check for a couple more autoconf versions
+
+ Also set $AUTOM4TE and blow away autom4te* subdirs
+
+2004-03-27 14:05 Dan Nelson <dnelson@allantgroup.com>
+
+ * TODO:
+
+ tcp wrappers support
+
+2004-03-18 13:04 Dan Nelson <dnelson@allantgroup.com>
+
+ * TODO:
+
+ ipv6
+
+2004-03-18 12:37 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in, spamass-milter.1.in, spamass-milter.cpp,
+ spamass-milter.h:
+
+ Document -p and -x
+
+ Add the ability to send spam to a spambucket even if -r is set
+
+2004-03-17 18:05 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS:
+
+ typo.
+
+2004-02-24 17:02 Dan Nelson <dnelson@allantgroup.com>
+
+ * autogen.sh:
+
+ Finally figured out why sometimes it would run the wrong auto* tool.
+ You need to set all 4 of these variables before calling any, or they'll
+ use their defaults which may be wrong.
+
+2004-02-21 22:18 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS, spamass-milter.cpp:
+
+ arg. why does cvs default to commit on a blank log.
+
+ Put email alias expansion under a flag (-x, defaulted to off).
+
+2004-02-21 22:16 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ [no log message]
+
+2004-02-09 17:03 Dan Nelson <dnelson@allantgroup.com>
+
+ * contrib/spamass-milter.sh:
+
+ Convert the FreeBSD startup script to rc.subr format.
+
+2004-01-27 13:39 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.1.in, spamass-milter.cpp:
+
+ -e now requires the default domain as a parameter. Also fix up
+ whitespace and punctuation in the manpage.
+
+2003-10-26 22:00 Dan Nelson <dnelson@allantgroup.com>
+
+ * autogen.sh:
+
+ Force automake to use the version of autoconf that we want.
+
+2003-10-24 12:36 Dan Nelson <dnelson@allantgroup.com>
+
+ * contrib/spamass-milter.sh:
+
+ update FreeBSD rc script to use the pidfile
+
+2003-10-24 01:55 Dan Nelson <dnelson@allantgroup.com>
+
+ * ac_cxx_exceptions.m4, ac_cxx_namespaces.m4,
+ ac_cxx_verbose_terminate_handler.m4, configure.in,
+ spamass-milter.cpp:
+
+ Use gcc's verbose exception handler is possible. If this function is
+ unavailable, C++ will simply abort on any exception. Ugh.
+
+2003-10-24 01:53 Dan Nelson <dnelson@allantgroup.com>
+
+ * ac_pike_compiler_flag.m4:
+
+ Use CPPFLAGS instead of CFLAGS/CXXFLAGS
+
+2003-10-21 16:41 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS:
+
+ update
+
+2003-10-21 16:40 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in, daemon.c, spamass-milter.cpp:
+
+ make -f fully daemonize, and add -P to create a pidfile.
+
+2003-09-12 00:45 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ remove $Revision:$
+
+2003-09-12 00:42 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ FreeBSD's libc_r userland threads has a race condition in popen, but I
+ don't know where. Wrap it in a mutex just to be safe.
+
+2003-09-05 21:38 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in:
+
+ no more spamass-milter.man.in
+
+2003-09-05 21:15 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am:
+
+ no more spamass-milter.man.in
+
+2003-09-05 21:06 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in:
+
+ no more spamass-milter.man
+
+2003-09-05 11:42 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am:
+
+ Distribute mdoc2man.awk, and let systems without mdoc functionality
+ convert the manpage themselves.
+
+2003-09-05 11:33 Dan Nelson <dnelson@allantgroup.com>
+
+ * mdoc2man.awk:
+
+
+ Yay! Peter Stuge decided on a license, so bring this back into CVS.
+
+2003-09-02 23:53 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Oops. Forgot to strip the domain part in local_user when there are no brackets.
+
+2003-08-29 11:01 Dan Nelson <dnelson@allantgroup.com>
+
+ * ac_pike_compiler_flag.m4, configure.in:
+
+ Pull in another autoconf test from Pike, which lets us test for
+ compiler flags. Add -fno-default-inline if possible, which disables
+ inlining of functions in classes. gdb does not process them correctly,
+ making debugging a pain.
+
+2003-08-29 11:00 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Redirect stderr to stdout when running sendmail -bv; otherwise we lose
+ anything sent to stderr
+
+2003-08-28 09:59 Dan Nelson <dnelson@allantgroup.com>
+
+ * TODO, spamass-milter.1.in, spamass-milter.cpp, spamass-milter.h:
+
+ Add -e flag to pass full email address to spamc
+
+ Run all recipients through sendmail -bv (this may end up behind a
+ commandline switch, but it's low-overhead so probably not).
+
+2003-08-12 22:47 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in, spamass-milter.cpp, spamass-milter.h:
+
+ - add printf style checking to debug() on systems that support it
+ - search for sendmail instead of relying on paths.h which may not exist
+
+2003-08-12 22:33 Dan Nelson <dnelson@allantgroup.com>
+
+ * ac_acx_pthread.m4:
+
+ Bump original version to 1.8, since the originating webpage apparently
+ did. There are absolutely no changes other than the version number.
+
+2003-08-11 17:12 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ move newrecipients out of the inner loop
+
+2003-08-11 16:36 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in, spamass-milter.1.in, spamass-milter.cpp,
+ spamass-milter.h:
+
+ Preliminary work to support alias/virtusertable expansion.
+ sendmail -bv is called and its output is parsed, but all we do is log it
+ so far.
+
+2003-08-05 23:45 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Fix two cases where we caught an error but didn't clean up the assassin
+ object.
+
+2003-08-05 23:29 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ - Correctly exit if we can't exec spamc
+ - Check our polled fds for errors - prevents us from spinning if
+ something happens to spamc
+
+2003-08-04 23:13 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS:
+
+ document crash on empty body fix
+
+2003-08-04 18:03 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am:
+
+ Distribute subst_poll.h
+
+2003-07-31 17:35 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ We still need to call update_or_insert for headers if -M is set, so we
+ can cache the header value. Just don't call the milter update
+ functions.
+
+2003-07-31 14:13 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS, spamass-milter.1.in, spamass-milter.cpp:
+
+ New -M flag that disables all body/header changes. With this flag, the
+ milter is transparent to the message stream.
+
+2003-07-21 20:10 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ POSIX says strcasecmp requires strings.h
+
+2003-07-16 21:28 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ If there is no body, set bob to point to the end of the string returned
+ by spamassassin instead of string::npos.
+
+2003-07-09 12:58 Dan Nelson <dnelson@allantgroup.com>
+
+ * TODO:
+
+ [no log message]
+
+2003-07-07 14:46 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Added func logging for two returns in ::output and ::input
+
+2003-07-07 14:44 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Add func debug logging for mlfi_envrcpt
+
+2003-07-07 14:39 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ shortcut ip_in_networklist if the list is empty.
+
+2003-07-07 13:45 Dan Nelson <dnelson@allantgroup.com>
+
+ * TODO:
+
+ [no log message]
+
+2003-07-02 17:28 Dan Nelson <dnelson@allantgroup.com>
+
+ * TODO:
+
+ things to do
+
+2003-06-30 15:24 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in:
+
+ Small workaround for people trying to configure from CVS. Create a
+ blank spamass-milter.man.in if it doesn't already exist.
+
+2003-06-30 15:23 Dan Nelson <dnelson@allantgroup.com>
+
+ * autogen.sh:
+
+ spell automake with a lowercase a
+
+2003-06-26 22:24 Dan Nelson <dnelson@allantgroup.com>
+
+ * contrib/spamass-milter.spec.in:
+
+ We don't have these two files.
+
+2003-06-26 17:13 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS, configure.in:
+
+ Now at 0.2.0+cvs
+
+2003-06-26 16:57 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS, configure.in:
+
+ Version 0.2.0
+
+2003-06-26 10:10 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ typo
+
+2003-06-26 09:45 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ NULL hostaddr is actually a common occurance; running sendmail on the
+ local host does this. Map NULL to 127.0.0.1 so it's treated just like
+ a connection to localhost port 25.
+
+2003-06-25 11:17 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS, spamass-milter.1.in, spamass-milter.cpp:
+
+ Document -B, and sort -h output
+
+2003-06-25 10:17 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am, configure.in, mdoc2man.awk:
+
+ I haven't gotten a license from the author of mdoc2man.awk, so remove
+ it and, distribute a preproccesed .man.in for systems without mdoc
+ macros instead.
+
+2003-06-25 10:15 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Check for a NULL hostaddr in mlfi_connect. It should never happen, so
+ emit a warning in the log when it does.
+
+2003-06-18 18:13 Dan Nelson <dnelson@allantgroup.com>
+
+ * ac_dmalloc.m4, configure.in, spamass-milter.cpp:
+
+ - Use my own dmalloc check, since AM_WITH_DMALLOC only works for
+ nonthreaded C programs.
+
+ - Some systems provide strsep() but no prototype. Check for that.
+
+2003-06-18 13:57 Dan Nelson <dnelson@allantgroup.com>
+
+ * ac_pike_paths.m4, configure.in:
+
+ - Add a --with-dmalloc option
+
+ - Search some common directories for includes and libraries, to find
+ dmalloc or user-compiled sendmail libs.
+
+2003-06-16 14:59 Dan Nelson <dnelson@allantgroup.com>
+
+ * TODO:
+
+ [no log message]
+
+2003-06-14 14:17 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.h:
+
+ Move the launch of spamc from mlfi_envrcpt back to mlfi_header where it
+ was before rev 1.38. This should fix reports of "spamd: bad protocol"
+ errors being logged when we kill spamc without sending any data.
+
+2003-06-14 14:01 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Move the launch of spamc from mlfi_envrcpt back to mlfi_header where it
+ was before rev 1.38. This should fix reports of "spamd: bad protocol"
+ errors being logged when we kill spamc without sending any data.
+
+2003-06-12 21:39 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am:
+
+ Add an "upload" makefile target that pushes tarballs to savannah
+
+2003-06-12 17:41 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am, spamass-milter.cpp, spamass-milter.h:
+
+ Lowercase the username when using -u; email addresses are
+ case-insensitive, but userids are usually all-lowercase and
+ case-sensitive.
+
+2003-06-11 15:18 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS:
+
+ update
+
+2003-06-11 15:17 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp, spamass-milter.h:
+
+ * Even better sendmail-style Received: header generation. Pass SA the
+ value of the HELO command. This lets rules like FORGED_HOTMAIL work.
+
+ * Beginnings of a better debug logline. Remember the sendmail queue ID.
+ Not sure of the best way to pass it to the debug() function though.
+
+2003-06-10 13:42 Dan Nelson <dnelson@allantgroup.com>
+
+ * README:
+
+ Remove some of the disclaimers; it's pretty stable now.
+
+2003-06-10 00:52 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am:
+
+ Tell automake we would like a bzip2 tarball also
+
+2003-06-10 00:02 Dan Nelson <dnelson@allantgroup.com>
+
+ * strsep.c:
+
+ really add Id
+
+2003-06-10 00:02 Dan Nelson <dnelson@allantgroup.com>
+
+ * strsep.c:
+
+ add Id
+
+2003-06-09 23:57 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in, spamass-milter.cpp, strsep.c:
+
+ provide a strsep() for systems without one
+
+2003-06-09 23:47 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ printf->fprintf
+
+2003-06-09 22:03 Dan Nelson <dnelson@allantgroup.com>
+
+ * TODO, spamass-milter.cpp:
+
+ New flag -B. Just like -b, but the original recipient gets the spam too.
+
+2003-06-09 16:24 Dan Nelson <dnelson@allantgroup.com>
+
+ * TODO:
+
+ Just realized you can redirect to /dev/null to silently drop spam
+
+2003-06-09 15:27 Dan Nelson <dnelson@allantgroup.com>
+
+ * TODO:
+
+ alias expansion?
+
+2003-06-09 12:19 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS, spamass-milter.1.in, spamass-milter.cpp, spamass-milter.h:
+
+ Add spambucket support. "-b otheraddress" will redirect all tagged
+ spam to that address. Original recipients get put into X-Spam-Orig-To:
+ headers.
+
+2003-06-09 12:16 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.1.in:
+
+ mdoc cleanup
+
+2003-06-09 10:57 Dan Nelson <dnelson@allantgroup.com>
+
+ * poll.c:
+
+ Oops. forgot to include config.h
+
+2003-06-07 14:50 Dan Nelson <dnelson@allantgroup.com>
+
+ * TODO:
+
+ scratchpad so I don't forget things
+
+2003-06-07 14:43 Dan Nelson <dnelson@allantgroup.com>
+
+ * ac_vl_prog_cc_warnings.m4, configure.in:
+
+ Use VL_PROG_CC_WARNINGS to add compiler-appropriate warnings flags
+
+2003-06-07 14:16 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp, spamass-milter.h:
+
+ Instead of playing musical chairs with our private context pointer,
+ create a single structure that holds both the remote IP address and the
+ pointer to our assassin object.
+
+2003-06-06 21:56 Dan Nelson <dnelson@allantgroup.com>
+
+ * ac_acx_pthread.m4, ac_cf_gnu_source.m4, acinclude.m4, autogen.sh:
+
+ Split 3rd-party autoconf macros out into their own files
+
+2003-06-06 16:04 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS:
+
+ Summarize the last few days worth of commits
+
+2003-06-06 15:48 Dan Nelson <dnelson@allantgroup.com>
+
+ * README, spamass-milter.cpp:
+
+ Generate a better dummy Received: header. If the admin has added the
+ "b" macro (rfc822 date) to the milter's list of visible macros, pass
+ that to spamc. This allows SA to do Date: header validation if there
+ are no other Received: headers in the message.
+
+ Also update README to include the sendmail.mc line required to enable "b".
+
+2003-06-06 11:37 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp, spamass-milter.h:
+
+
+ Remember the envelope sender and recipient, remember the connecting IP,
+ and insert appropriate headers at the top of the message we send to
+ spamc, so that Spamassassin can use them.
+
+ The envelope info gets put into X-Envelope-From: and X-Envelope-To: ,
+ which SA will use when checking the whitelist_to and _from rules.
+
+ The connecting IP gets put into a dummy "Received: [111.222.333.444]"
+ header. Without it, none of the DNSBL or whitelist checks will see
+ this IP. The dummy header does not seem to trigger any "forged
+ Received:" rules, so that's good.
+
+ Note that remembering the connecting IP address means we need to carry
+ information between the lifetimes of SpamAssassin objects, so we have
+ to use the milter private data pointer. This means that within a
+ message, the pointer points to a SpamAssassin object. Outside of a
+ message but during a client connection, the pointer points to a struct
+ connect_info. This means some extra work in the message error path to
+ recover the connect_info pointer. It also means that for symmetry, we
+ have to create the SpamAssassin object at the beginning on a "message"
+ session - i.e. within mlfi_envrcpt instead of mlfi_header.
+
+ Also for ease of coding add some more output methods with string and
+ unsized void* arguments.
+
+2003-06-06 11:22 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Commit Waider's updated retrieve_field function that I forgot about.
+ This fixes a bug where the milter fails to retrieve the SA score from a
+ message with absolutely no headers. The old code could not retrieve the
+ first header in a message, and if there are no headers in the original
+ message, the X-Spam-Status header ends up being the first.
+
+2003-06-06 11:16 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ RFC822 says the blank line between header and body is \r\n.
+ Spamassassin doesn't seem to care but it's wrong anyway :)
+
+2003-06-06 11:10 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Clean up some debugging messages
+
+2003-06-06 11:05 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.1.in, spamass-milter.cpp, spamass-milter.h:
+
+ Convert the debug levels into flags, so it's easier to enable debugging
+ for a single subsystem. The old numbers are still supported.
+
+2003-06-06 10:43 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Cleanup commit. You don't need a semicolon after a function body, and
+ Intel's compiler warns about them.
+
+2003-06-06 10:34 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am:
+
+ explicitly make spamass-milter.cpp depend on spamass-milter.h
+
+2003-06-05 16:18 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ reword -i description so it says skip checks instead of skip the
+ mail itself
+
+2003-06-04 14:41 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ I thought I cut'n'pasted this right, but I didn't. Allocate the
+ right number of bytes for the internalnets array when resizing.
+
+2003-06-03 02:20 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS, spamass-milter.1.in:
+
+ update NEWS, adjust description of -i
+
+2003-06-03 01:36 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp, spamass-milter.h:
+
+ gcc 2.95 apparently can't handle the case where a struct and an element
+ have the same name.
+
+2003-06-03 01:24 Dan Nelson <dnelson@allantgroup.com>
+
+ * AUTHORS, spamass-milter.1.in, spamass-milter.cpp,
+ spamass-milter.h:
+
+ Add -i to list netblocks to ignore (argument is a comma-delimited list
+ of ip addresses, ip/netmask, or ip/bits).
+
+ Remember arguments after --, and pass them to spamc. This makes the -D
+ flag redundant, and lets you change the port number, enable SSL mode,
+ etc.
+
+2003-06-02 21:09 Dan Nelson <dnelson@allantgroup.com>
+
+ * mdoc2man.awk:
+
+ If the server cannot process mdoc macros, use mdoc2man to generate a
+ manpage with man macros instead.
+
+2003-06-02 21:08 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am, configure.in, spamass-milter.cpp:
+
+
+ If the server cannot process mdoc macros, use mdoc2man to generate a
+ manpage with man macros instead.
+
+2003-03-10 21:40 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in, poll.c:
+
+ add some more headers to pooll.c, and allow the user to force poll
+ emulation, for testing.
+
+2003-03-10 17:42 Dan Nelson <dnelson@allantgroup.com>
+
+ * autogen.sh:
+
+ expand check to search for automake as well, check for more versions
+
+2003-03-06 23:11 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in:
+
+ Oops. Forgot to enable the poll.h test.
+
+2003-03-06 22:33 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.1.in, spamass-milter.cpp:
+
+ Use 'defaultuser' instead of 'user' as an example when talking about
+ the argument to the -u flag.
+
+2003-03-06 22:26 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.1.in:
+
+ Document the -D host flag.
+
+2003-03-06 15:50 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in:
+
+ I keep forgetting to bump the version number before and after a
+ release. We are now at 0.1.3a+cvs
+
+2003-03-06 15:40 Dan Nelson <dnelson@allantgroup.com>
+
+ * poll.c, subst_poll.h:
+
+
+ Add Ids, also record that fact that this function was lifted from
+ the "wy60" terminal emulator software by Markus Gutschke.
+
+2003-03-06 15:37 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am, configure.in, poll.c, spamass-milter.cpp,
+ subst_poll.h:
+
+
+ Provide a substitute poll() function for systems that are missing it.
+
+2003-03-06 15:33 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp, AUTHORS, contrib/spamass-milter-redhat.rc:
+
+
+ . Add the ability to connect to a spamd on another server (-D host)
+
+ . Change the redhat rc script's path to match where an RPM would put
+ spamass-milter
+
+2003-01-21 14:44 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ (forced commit due to empty log message)
+
+ Fix "-u" to actually pass its argument to spamc instead of hardcoding
+ "_multi_".
+
+2003-01-21 14:42 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ [no log message]
+
+2003-01-17 14:53 Dan Nelson <dnelson@allantgroup.com>
+
+ * contrib/spamass-milter-redhat.rc:
+
+ Config files are sourced and do not require the execute bit set, so
+ just test to see if the file exists.
+
+2002-12-31 14:17 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS, configure.in:
+
+ Version 0.1.3a
+
+2002-12-31 14:03 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Add a call to fork spamc after header processing, as a fallback case
+ for when no headers are sent at all.
+
+2002-12-31 13:34 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ add a big more debugging to the poll loop
+
+2002-12-27 16:32 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in:
+
+ Version is now 0.1.3+cvs
+
+2002-12-27 15:53 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in:
+
+ Change version to 0.1.3
+
+2002-12-27 15:52 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS:
+
+ Add Id
+
+2002-12-27 15:50 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS:
+
+ News for 0.1.3
+
+2002-12-27 15:38 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am:
+
+ Add FreeBSD rc script
+
+2002-12-27 15:36 Dan Nelson <dnelson@allantgroup.com>
+
+ * contrib/spamass-milter.sh:
+
+ add Id
+
+2002-12-27 15:35 Dan Nelson <dnelson@allantgroup.com>
+
+ * contrib/spamass-milter.sh:
+
+ Add a FreeBSD startup script
+
+2002-12-23 11:08 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.1.in, spamass-milter.cpp, spamass-milter.h:
+
+ Add -u option to pass the username to spamc. Without -u behaviour
+ should be unchanged.
+
+2002-12-21 12:20 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Check for an empty header
+
+2002-12-21 12:18 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.1.in:
+
+ document debug level 3
+
+2002-11-17 17:01 Dan Nelson <dnelson@allantgroup.com>
+
+ * AUTHORS:
+
+ Update list of patch submitters
+
+2002-11-17 16:57 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.1.in, spamass-milter.cpp, spamass-milter.h:
+
+ Add -r flag, which allows you to have sendmail reject the message if SA
+ tags it as spam, or if it exceeds a given score.
+
+ Closes patches 440 and 441, submitted by Patrick Monnerat <pm@datasphere.ch>
+
+2002-11-15 17:22 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.1.in, spamass-milter.cpp:
+
+ Add -m option, which disables body, Subject:, and Content-Type: header
+ modification. Closes patch 385.
+
+2002-11-15 15:54 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in:
+
+ Revert the spamc check back to the way it was (find absolute path of
+ spamc). We'll do "spamc with arguments" testing later, when the milter
+ can actaully handle it.
+
+2002-11-15 01:18 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am:
+
+ Switch from --fsf to --no-wrap, which is really what I wanted in the
+ first place.
+
+2002-11-15 01:17 Dan Nelson <dnelson@allantgroup.com>
+
+ * autogen.sh:
+
+
+ Try really hard to run a new-ish version of autoconf. This should make
+ rhautogen.sh obsolete.
+
+2002-11-15 01:04 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp, spamass-milter.h:
+
+
+ - Factor out all the header-changing code into a single
+ update_or_insert function. This greatly simplifies the whole
+ program, finally making it insert/change/leave correctly for all the
+ headers it touches.
+
+ - Fix mlfi_header to actually suppress incoming SA headers like it's
+ supposed to. This fixes a bug where an incoming SA header with the
+ wrong case would end up overriding the header our SA tries to add.
+
+ - Declare a temporary string variable to hold the body text before we
+ call smfi_replacebody. Trying to do stringvar.substr(x,x).c_str()
+ simply will not work. substr() creates a temporary string object,
+ c_str() dutifully returns a pointer to it, and when the destructor
+ for the temp string frees the memory, the data the pointer points to
+ gets blown away. This fixes a longstanding bug where tagged emails
+ would have their message body completely overwritten with x00 or xD0
+ on OSes that ensure that free'd memory is blanked.
+
+ - C++ should be strangled, then shot, then burned, and the ashes set
+ into a cement block and dumped into the ocean. This should be
+ obvious.
+
+2002-11-14 21:23 Dan Nelson <dnelson@allantgroup.com>
+
+ * acinclude.m4:
+
+ Update acx_pthread; Tru64 and HP-UX compatibility, and make sure the tests are run under C
+
+2002-11-14 21:22 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in:
+
+ Only add /usr/lib/libmilter as a library path if the directory exists
+
+2002-09-23 00:39 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in:
+
+ Previous commit should read
+
+ AC_CHECK_PROG doesn't work; AC_CHECK_PROGS does.
+
+2002-09-23 00:39 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in:
+
+ AC_CHECK_PROG doesn't work; AC_CHECK_PROG does.
+
+2002-09-20 16:15 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in:
+
+
+ Allow the user to specify spamc arguments during configure
+
+2002-09-18 12:17 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am, configure.in:
+
+
+ Change version number to reflace that there are post-release changes.
+
+ Change how the ChangeLog is created for the distribution file, so we
+ don't get a 0-byte ChangeLog.bak in the .tar.gz.
+
+2002-08-28 11:54 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Add Id variable to store CVS version in the binary
+
+2002-08-23 11:59 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Fix bug that caused doubling of Content-Type: on spam emails.
+
+2002-08-19 15:39 Dan Nelson <dnelson@allantgroup.com>
+
+ * contrib/: spamass-milter-redhat.rc, spamass-milter.spec.in:
+
+ * Patches from Fritz Elfert <fritz.elfert@to.com>
+ - Use RPM macros everywhere (this fixes install of manpage)
+ - Changed Group to an official group of RedHat
+ - Added preun and post scriptlets
+ - Made clean scriptlet foolproof
+ - Added condrestart to redhat rc script
+
+2002-08-18 16:38 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS:
+
+ Fix typo
+
+2002-08-18 16:13 Dan Nelson <dnelson@allantgroup.com>
+
+ * NEWS:
+
+ News for 0.1.2
+
+2002-08-18 16:13 Dan Nelson <dnelson@allantgroup.com>
+
+ * AUTHORS:
+
+ Update with my name, and add Waider
+
+2002-08-18 15:53 Dan Nelson <dnelson@allantgroup.com>
+
+ * ChangeLog, Makefile.am:
+
+ More cleanup for the distribution.
+
+ - Zero out ChangeLog, as it is now autogenerated by "make dist". You
+ can manually generate one with "make changelog", but your tree must
+ have been checked out with CVS for it to work (i.e. the dist tarball
+ won't work, but then again it will ship with a matching ChangeLog, so
+ who cares)
+
+ - Add some more files to maintainer-clean-local: and distclean-local:
+ targets, as the autoconf/make people can't seem to keep track of what
+ files their own tools generate.
+
+2002-08-18 15:44 Dan Nelson <dnelson@allantgroup.com>
+
+ * contrib/users:
+
+ List of committer IDs and names, for use by cvs2cl
+
+2002-08-17 22:09 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.1.in:
+
+ Remove some extra comments
+
+2002-08-14 11:15 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+
+ Fix swapped variables names preventing subject and content-type from
+ being updated (from Lance A. Brown)
+
+2002-07-25 23:32 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am, configure.in, spamass-milter.1.in:
+
+ Minimal manpage.
+
+2002-07-24 11:19 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am, autogen.sh, configure.in, rhautogen.sh,
+ contrib/spamass-milter, contrib/spamass-milter-redhat.rc,
+ contrib/spamass-milter.spec.in:
+
+
+ - Add RedHat .spec and .rc files
+
+ - Add contrib/ files to the distfile
+
+2002-07-22 22:48 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+ Forgot to mention; the previous commit was patch 354
+
+2002-07-22 22:47 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+
+ Only replace Subject: and Content-Type: headers if they change
+
+2002-07-22 22:46 Dan Nelson <dnelson@allantgroup.com>
+
+ * configure.in:
+
+ Make failure to find milter library fatal
+
+2002-07-22 22:34 Dan Nelson <dnelson@allantgroup.com>
+
+ * spamass-milter.cpp:
+
+
+ Patch 341
+
+ - Fix typo affecting the case of incoming spam with no subject
+
+2002-07-22 21:05 Dan Nelson <dnelson@allantgroup.com>
+
+ * acinclude.m4:
+
+ Fix an accidentally spammed embedded Id
+
+2002-07-22 21:02 Dan Nelson <dnelson@allantgroup.com>
+
+ * Makefile.am, acconfig.h, acinclude.m4, autogen.sh, configure.in,
+ spamass-milter.cpp, spamass-milter.h:
+
+
+ - Update to autoconf 2.53
+ - Use ACX_PTHREAD for more portable threads detection
+ - Only -lmilter is required; search for -lsm or -lsmutil when -lmilter fails,
+ for compatibility with older sendmails
+ - Only mfapi.h is required
+ - add net library checks for Solaris
+ - Reorder entries in autogen.sh
+ - Move struct declarations into headers, and variable definitions into
+ source.
+ - add -d debug flag
+ - fix incorrect use of LOG_ macros
+ - use poll when feeding data to spamc to avoid the 250k deadlock
+ - compiles with gcc 3.1
+
+2002-04-27 12:14 Georg C. F. Greve <greve@gnu.org>
+
+ * contrib/spamass-milter:
+
+ adopted for commandline-parameter change
+
+2002-04-27 12:05 Georg C. F. Greve <greve@gnu.org>
+
+ * ChangeLog, spamass-milter.cpp, spamass-milter.h:
+
+ Added support for 'X-Spam-Level' Flag introduced with version 2.20 of SpamAssassin
+
+2002-03-27 09:56 Michael Brown <michael@supermathie.net>
+
+ * spamass-milter.cpp:
+
+ Added a -f option that makes spamass-milter fork into the background
+ spamass-milt now removes the socket if it already exists.
+
+2002-03-06 07:07 Georg C. F. Greve <greve@gnu.org>
+
+ * AUTHORS, ChangeLog, NEWS, configure.in, spamass-milter.cpp,
+ spamass-milter.h, contrib/spamass-milter:
+
+ Applied some patches. Rights assigned to FSF Europe. Appointed Michael as maintainer.
+
+2002-02-26 06:55 Georg C. F. Greve <greve@gnu.org>
+
+ * contrib/spamass-milter:
+
+ seems I forgot to commit it last time. *sigh*
+
+2002-01-31 09:56 Georg C. F. Greve <greve@gnu.org>
+
+ * NEWS:
+
+ News for 0.1.1
+
+2002-01-31 09:34 Georg C. F. Greve <greve@gnu.org>
+
+ * spamass-milter.cpp:
+
+ fixed some typing bugs... :-)
+
+2002-01-31 09:28 Georg C. F. Greve <greve@gnu.org>
+
+ * spamass-milter.cpp, spamass-milter.h, ChangeLog, configure.in:
+
+ * Update for Version 2.0+ of SpamAssassin
+ * Only modify mail *not* rated Spam before, leave marked Spam untouched
+
+2002-01-16 16:24 Georg C. F. Greve <greve@gnu.org>
+
+ * spamass-milter.cpp:
+
+ output package name & version with usage
+
+2002-01-16 16:19 Georg C. F. Greve <greve@gnu.org>
+
+ * spamass-milter.cpp:
+
+ now using SPAMC variable determined in configure
+
+2002-01-16 16:16 Georg C. F. Greve <greve@gnu.org>
+
+ * contrib/README.gnus:
+
+ This might be useful to other gnus users.
+
+2002-01-16 16:10 Georg C. F. Greve <greve@gnu.org>
+
+ * README:
+
+ A small README to have minimal documentation
+
+2002-01-16 15:41 Georg C. F. Greve <greve@gnu.org>
+
+ * Makefile.am, acconfig.h, configure.in:
+
+ Autoconf should work now
+
+2002-01-16 14:30 Georg C. F. Greve <greve@gnu.org>
+
+ * acconfig.h, config.h.in, AUTHORS, NEWS, README:
+
+ autoconf setup still needs polishing
+
+2002-01-16 14:26 Georg C. F. Greve <greve@gnu.org>
+
+ * ChangeLog, Makefile.am, autogen.sh, configure.in, config.h.in:
+
+ autoconf setup still needs polishing
+
+2002-01-16 03:41 Georg C. F. Greve <greve@gnu.org>
+
+ * spamass-milter.cpp, spamass-milter.h:
+
+ Source Base
+
--- /dev/null
+## Process this file with automake to produce Makefile.in
+## $Id: Makefile.am,v 1.21 2005/02/05 07:34:11 dnelson Exp $
+
+AUTOMAKE_OPTIONS = no-dependencies foreign dist-bzip2
+
+# The number of files autoconf leaves lying around after a clean is amazing.
+CLEANFILES = *~ .deps/* .libs/* .deps .libs spamass-milter.man
+MAINTAINERCLEANFILES = Makefile.in aclocal.m4 config.h.in \
+ config.log config.status configure configure.lineno stamp-h.in \
+ COPYING INSTALL config.guess config.sub install-sh missing mkinstalldirs \
+ ${DIST_ARCHIVES} ${DIST_ARCHIVE_SIGS}
+
+maintainer-clean-local:
+ -chmod -R +w autom4te* $(distdir)
+ rm -rf autom4te* $(distdir)
+distclean-local:
+ rm -f configure.lineno
+
+# rebuild ChangeLog during dist, but only if it's a zero-byte file
+# (i.e. clean CVS co)
+dist-hook:
+ if test ! -s $(distdir)/ChangeLog ; then \
+ cvs2cl --no-wrap -S -U contrib/users --stdout > $(distdir)/ChangeLog ; \
+ fi
+
+.PHONY: sign upload changelog dist-hook
+
+DIST_ARCHIVE_SIGS=${DIST_ARCHIVES:S/$/.sig/}
+
+# Bah. Automake does not have a dist-local hook which would let me
+# create the PGP sigs when the distfiles themselves are built. So
+# build them just before upload.
+sign: dist-all
+ rm -f ${DIST_ARCHIVE_SIGS}
+ for file in ${DIST_ARCHIVES} ; \
+ do \
+ gpg -b -a -u 6B56A1DD -o $$file.sig $$file ; \
+ done
+
+upload: dist-all sign
+ ncftpput savannah.gnu.org incoming/savannah/spamass-milt \
+ ${DIST_ARCHIVES} ${DIST_ARCHIVE_SIGS}
+
+# The good old way
+#upload: dist-all
+# rsync -a --progress $(distdir).tar.bz2 $(distdir).tar.gz subversions.gnu.org:/upload/spamass-milt/
+
+changelog:
+ cvs2cl --no-wrap -S -U contrib/users
+
+.1.man: mdoc2man.awk
+ $(AWK) -f mdoc2man.awk $< > $@
+
+if HAVE_MDOC
+man_MANS = spamass-milter.1
+else
+man1_MANS = spamass-milter.man
+endif
+sbin_PROGRAMS = spamass-milter
+DEB_CONTRIB = contrib/spamass-milter
+RH_CONTRIB = contrib/spamass-milter-redhat.rc \
+ contrib/spamass-milter.spec \
+ contrib/spamass-milter.spec.in
+FBSD_CONTRIB = contrib/spamass-milter.sh
+MISC_CONTRIB = contrib/README.gnus
+spamass_milter_SOURCES = spamass-milter.cpp spamass-milter.h
+spamass_milter_LDADD = @LIBOBJS@
+EXTRA_DIST = $(DEB_CONTRIB) \
+ $(RH_CONTRIB) \
+ $(FBSD_CONTRIB) \
+ $(MISC_CONTRIB) \
+ mdoc2man.awk \
+ spamass-milter.1.in \
+ subst_poll.h
+
+spamass-milter.cpp: spamass-milter.h
--- /dev/null
+# Makefile.in generated by automake 1.9.4 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SOURCES = $(spamass_milter_SOURCES)
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+sbin_PROGRAMS = spamass-milter$(EXEEXT)
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+ $(srcdir)/spamass-milter.1.in $(top_srcdir)/configure \
+ $(top_srcdir)/contrib/spamass-milter.spec.in AUTHORS ChangeLog \
+ NEWS TODO config.guess config.sub daemon.c install-sh missing \
+ poll.c strsep.c
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/ac_acx_pthread.m4 \
+ $(top_srcdir)/ac_cf_gnu_source.m4 \
+ $(top_srcdir)/ac_cxx_exceptions.m4 \
+ $(top_srcdir)/ac_cxx_namespaces.m4 \
+ $(top_srcdir)/ac_cxx_verbose_terminate_handler.m4 \
+ $(top_srcdir)/ac_dmalloc.m4 \
+ $(top_srcdir)/ac_pike_compiler_flag.m4 \
+ $(top_srcdir)/ac_vl_prog_cc_warnings.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno configure.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = contrib/spamass-milter.spec spamass-milter.1
+am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)"
+sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+PROGRAMS = $(sbin_PROGRAMS)
+am_spamass_milter_OBJECTS = spamass-milter.$(OBJEXT)
+spamass_milter_OBJECTS = $(am_spamass_milter_OBJECTS)
+spamass_milter_DEPENDENCIES = @LIBOBJS@
+DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
+depcomp =
+am__depfiles_maybe =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
+ -o $@
+SOURCES = $(spamass_milter_SOURCES)
+DIST_SOURCES = $(spamass_milter_SOURCES)
+man1dir = $(mandir)/man1
+MANS = $(man1_MANS) $(man_MANS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ { test ! -d $(distdir) \
+ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+HAVE_MDOC_FALSE = @HAVE_MDOC_FALSE@
+HAVE_MDOC_TRUE = @HAVE_MDOC_TRUE@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+NROFF = @NROFF@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PTHREAD_CC = @PTHREAD_CC@
+PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
+PTHREAD_LIBS = @PTHREAD_LIBS@
+SENDMAIL = @SENDMAIL@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+SPAMC = @SPAMC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_STRIP = @ac_ct_STRIP@
+acx_pthread_config = @acx_pthread_config@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+AUTOMAKE_OPTIONS = no-dependencies foreign dist-bzip2
+
+# The number of files autoconf leaves lying around after a clean is amazing.
+CLEANFILES = *~ .deps/* .libs/* .deps .libs spamass-milter.man
+MAINTAINERCLEANFILES = Makefile.in aclocal.m4 config.h.in \
+ config.log config.status configure configure.lineno stamp-h.in \
+ COPYING INSTALL config.guess config.sub install-sh missing mkinstalldirs \
+ ${DIST_ARCHIVES} ${DIST_ARCHIVE_SIGS}
+
+DIST_ARCHIVE_SIGS = ${DIST_ARCHIVES:S/$/.sig/}
+@HAVE_MDOC_TRUE@man_MANS = spamass-milter.1
+@HAVE_MDOC_FALSE@man1_MANS = spamass-milter.man
+DEB_CONTRIB = contrib/spamass-milter
+RH_CONTRIB = contrib/spamass-milter-redhat.rc \
+ contrib/spamass-milter.spec \
+ contrib/spamass-milter.spec.in
+
+FBSD_CONTRIB = contrib/spamass-milter.sh
+MISC_CONTRIB = contrib/README.gnus
+spamass_milter_SOURCES = spamass-milter.cpp spamass-milter.h
+spamass_milter_LDADD = @LIBOBJS@
+EXTRA_DIST = $(DEB_CONTRIB) \
+ $(RH_CONTRIB) \
+ $(FBSD_CONTRIB) \
+ $(MISC_CONTRIB) \
+ mdoc2man.awk \
+ spamass-milter.1.in \
+ subst_poll.h
+
+all: config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .1 .c .cpp .man .o .obj
+am--refresh:
+ @:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
+ cd $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.h: stamp-h1
+ @if test ! -f $@; then \
+ rm -f stamp-h1; \
+ $(MAKE) stamp-h1; \
+ else :; fi
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: $(am__configure_deps)
+ cd $(top_srcdir) && $(AUTOHEADER)
+ rm -f stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f config.h stamp-h1
+contrib/spamass-milter.spec: $(top_builddir)/config.status $(top_srcdir)/contrib/spamass-milter.spec.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+spamass-milter.1: $(top_builddir)/config.status $(srcdir)/spamass-milter.1.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+install-sbinPROGRAMS: $(sbin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ test -z "$(sbindir)" || $(mkdir_p) "$(DESTDIR)$(sbindir)"
+ @list='$(sbin_PROGRAMS)'; for p in $$list; do \
+ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+ if test -f $$p \
+ ; then \
+ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
+ $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
+ else :; fi; \
+ done
+
+uninstall-sbinPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(sbin_PROGRAMS)'; for p in $$list; do \
+ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
+ rm -f "$(DESTDIR)$(sbindir)/$$f"; \
+ done
+
+clean-sbinPROGRAMS:
+ -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
+spamass-milter$(EXEEXT): $(spamass_milter_OBJECTS) $(spamass_milter_DEPENDENCIES)
+ @rm -f spamass-milter$(EXEEXT)
+ $(CXXLINK) $(spamass_milter_LDFLAGS) $(spamass_milter_OBJECTS) $(spamass_milter_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+.c.o:
+ $(COMPILE) -c $<
+
+.c.obj:
+ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.cpp.o:
+ $(CXXCOMPILE) -c -o $@ $<
+
+.cpp.obj:
+ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+uninstall-info-am:
+install-man1: $(man1_MANS) $(man_MANS)
+ @$(NORMAL_INSTALL)
+ test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
+ @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
+ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+ for i in $$l2; do \
+ case "$$i" in \
+ *.1*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
+ else file=$$i; fi; \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ case "$$ext" in \
+ 1*) ;; \
+ *) ext='1' ;; \
+ esac; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed -e 's/^.*\///'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
+ done
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
+ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+ for i in $$l2; do \
+ case "$$i" in \
+ *.1*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ case "$$ext" in \
+ 1*) ;; \
+ *) ext='1' ;; \
+ esac; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed -e 's/^.*\///'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
+ rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ mkdir $(distdir)
+ $(mkdir_p) $(distdir)/. $(distdir)/contrib
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-hook
+ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r $(distdir)
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+dist-tarZ: distdir
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__remove_distdir)
+
+dist-shar: distdir
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__remove_distdir)
+
+dist dist-all: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/_build
+ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && cd $(distdir)/_build \
+ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ $(am__remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+distuninstallcheck:
+ @cd $(distuninstallcheck_dir) \
+ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS) config.h
+installdirs:
+ for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(mkdir_p) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-am
+
+clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am
+
+distclean: distclean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-hdr distclean-local distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-exec-am: install-sbinPROGRAMS
+
+install-info: install-info-am
+
+install-man: install-man1
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic \
+ maintainer-clean-local
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am uninstall-man uninstall-sbinPROGRAMS
+
+uninstall-man: uninstall-man1
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+ clean-generic clean-sbinPROGRAMS ctags dist dist-all \
+ dist-bzip2 dist-gzip dist-hook dist-shar dist-tarZ dist-zip \
+ distcheck distclean distclean-compile distclean-generic \
+ distclean-hdr distclean-local distclean-tags distcleancheck \
+ distdir distuninstallcheck dvi dvi-am html html-am info \
+ info-am install install-am install-data install-data-am \
+ install-exec install-exec-am install-info install-info-am \
+ install-man install-man1 install-sbinPROGRAMS install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic maintainer-clean-local mostlyclean \
+ mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am uninstall-info-am uninstall-man \
+ uninstall-man1 uninstall-sbinPROGRAMS
+
+
+maintainer-clean-local:
+ -chmod -R +w autom4te* $(distdir)
+ rm -rf autom4te* $(distdir)
+distclean-local:
+ rm -f configure.lineno
+
+# rebuild ChangeLog during dist, but only if it's a zero-byte file
+# (i.e. clean CVS co)
+dist-hook:
+ if test ! -s $(distdir)/ChangeLog ; then \
+ cvs2cl --no-wrap -S -U contrib/users --stdout > $(distdir)/ChangeLog ; \
+ fi
+
+.PHONY: sign upload changelog dist-hook
+
+# Bah. Automake does not have a dist-local hook which would let me
+# create the PGP sigs when the distfiles themselves are built. So
+# build them just before upload.
+sign: dist-all
+ rm -f ${DIST_ARCHIVE_SIGS}
+ for file in ${DIST_ARCHIVES} ; \
+ do \
+ gpg -b -a -u 6B56A1DD -o $$file.sig $$file ; \
+ done
+
+upload: dist-all sign
+ ncftpput savannah.gnu.org incoming/savannah/spamass-milt \
+ ${DIST_ARCHIVES} ${DIST_ARCHIVE_SIGS}
+
+# The good old way
+#upload: dist-all
+# rsync -a --progress $(distdir).tar.bz2 $(distdir).tar.gz subversions.gnu.org:/upload/spamass-milt/
+
+changelog:
+ cvs2cl --no-wrap -S -U contrib/users
+
+.1.man: mdoc2man.awk
+ $(AWK) -f mdoc2man.awk $< > $@
+
+spamass-milter.cpp: spamass-milter.h
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+$Id: NEWS,v 1.23 2005/02/04 18:55:32 dnelson Exp $
+
+0.3.0: (2005-02-03)
+ * -M option which disables all message modifications
+ * Fixed crash on spam with no body at all
+ * -e option to pass full recipient email address to spamc
+ * -x option to expand recipient list with sendmail -bv
+ * -f truly daemonizes now, instead of simply forking
+ * -P option to create a pidfile
+ * Supports both Spamassassin 2.x and 3.0 X-Spam-Status: headers
+ * Fixed possible crash when a fork() call fails
+
+0.2.0: (2003-06-26)
+ * -b/-B options to redirect tagged messages to another email address.
+ * -i option to not run spamassassin on messages coming from specified
+ networks.
+ * All arguments after -- will get passed to spamc (deprecate -D at the
+ same time).
+ * Envelope, remote IP, HELO, and date get sent to spamc, so the
+ results more closely match what spamc via procmail sees. A lot of
+ SA rules could never fire because this data was missing. You will
+ need to add a line to your sendmail config file to enable date
+ passing (see README).
+ * A compatible manpage is generated on systems without mdoc macros.
+ * Incoming messages with absolutely no headers at all now get checked
+ correctly
+
+0.1.3a: (2002-12-31)
+ * Fixed hanging problem when processing a message with no headers at
+ all. Sort of serious, so it gets its own release.
+
+0.1.3: (2002-12-27)
+ * -m option disables body, Subject:, and Content-Type: header
+ modification.
+ * -r option tells sendmail to reject the message if it exceeds a given
+ score.
+ * -u option passes recipient username to spamc.
+ * Fixed illegal use of freed memory causing message loss on some
+ platforms.
+ * Fixed header doubling problem, and cleaned up the case where
+ incoming messages already have X-Spam* headers
+ * Updated RPM files.
+
+0.1.2: (2002-08-18)
+ * Many portability fixes. Should build on any *BSD, Linux, Solaris,
+ or Tru64 box, with any milter-compatible sendmail, with any
+ compiler.
+ * Fixed the "250K deadlock" bug.
+ * Subject and Content-Types headers are only replaced if they changed.
+ This makes /var/log/maillog a bit cleaner for servers that get mail
+ that has already been run through SpamAssassin. The mail is still
+ checked, so you can't bypass anything by adding SA headers.
+ * Added SpamAssassin field "X-Spam-Level".
+ * Added a manpage.
+ * Added RedHat spec files.
+ * -f option forks the milter into the background.
+ * -d debugging option.
+
+0.1.1: (2002-01-31)
+ * Added SpamAssassin 2.0+ field "X-Spam-Checker-Version"
+ * Changed behaviour as follows:
+ - Old (already present) "X-Spam" fields are passed to SpamAssassin again,
+ now it is up to SpamAssassin to make sure its not being lied to by
+ Spammers.
+ - Only mail that was previously marked being no Spam will get modified.
+ Reported Spam will remain unchanged.
+
+0.1.0: (2002-01-16)
+ * First release. What do you expect? :-)
--- /dev/null
+$Id: README,v 1.4 2003/06/10 18:42:38 dnelson Exp $
+
+Spamass-Milter, a small
+ - SpamAssassin Sendmail Mail Filter (Milter) Plugin
+-----------------------------------------------------
+
+For information about Sendmail or SpamAssassin, please see
+ http://www.sendmail.org
+ http://www.spamassassin.org
+
+
+Installation instructions:
+--------------------------
+
+You need to have sendmail + sendmail's libmilter (available since
+version 8.11, afaik, 8.12.+ recommended) installed. Depending on your
+distribution you may need to recompile sendmail for this.
+
+Under Debian, "apt-get install libmilter-dev" should do the trick.
+
+For more information, please refer to http://www.sendmail.org.
+
+You will need to have SpamAssassin spamc & spamd installed &
+configured.
+
+BEFORE INSTALLING & TRYING TO USE THIS PROGRAM, PLEASE MAKE SURE THAT
+SPAMC/SPAMD DOES EXACTLY WHAT YOU WANT; OTHERWISE YOU MIGHT RISK
+LOSING MAIL.
+
+Theoretically, "./configure ; make ; make install" (see INSTALL)
+should do the trick. If it doesn't, you may be missing something or
+the configuration may not be working for you.
+
+
+Configuration:
+--------------
+
+In contrib, you'll find a startup-script that should work almost out
+of the box under Debian. Just modify the execution path to where you
+put the spamass-milter binary and set the path of the socket to what
+you want to use. YOU WILL MOST LIKELY HAVE TO EDIT THE VARIABLES ON
+TOP OF THIS FILE.
+
+Then start the daemon via /etc/init.d/spamass-milter start and make
+sure it didn't crash/terminate immediately. If it does, there should
+usually be syslog output.
+
+If you want to make this happen automatically, you can use the
+update-rc.d command for this under Debian.
+
+
+Now you need to make sendmail use the plugin. I always recommend
+configuring sendmail through m4 & the sendmail.mc files. In this case
+adding the lines
+
+INPUT_MAIL_FILTER(`spamassassin', `S=local:/var/run/sendmail/spamass.sock, F=, T=C:15m;S:4m;R:4m;E:10m')dnl
+define(`confMILTER_MACROS_CONNECT',`b, j, _, {daemon_name}, {if_name}, {if_addr}')dnl
+
+should do the trick. Of course you need to modify the path of the
+socket if you put another one into the startup script. The timeouts
+have been increased somewhat because SpamAssassin may chew on it for a
+little while on a slow machine.
+
+Now recreate sendmail.cf, restart sendmail and experiment around a bit
+with the setup to make sure it is working.
+
+
+Q: Does this work for UUCP?
+
+Yes, it does. At least for me. :-)
+
+
+If you want, you might configure procmail to filter out the spam into
+a separate mailbox or do other fancy things. The SpamAssassin homepage
+will tell you more about it.
+
+That should be it. Have fun watching the spam drip off your box. :)
--- /dev/null
+$Id: TODO,v 1.13 2004/09/23 20:27:39 dnelson Exp $
+
+*DONE* Clean up the Reject/Copy to spambox/Deliver to recipient options:
+
+ R C D
+
+ -r Y - -
+ -B addr N Y Y
+ -b addr N Y N
+ default N N Y
+ -b null N N N
+
+ "null" being a mail alias to /dev/null
+
+*DONE* Try and expand aliases before checking for -u usernames; sendmail -bv
+
+Add exclude lists to -i (tightest match wins)
+
+*DONE* Add flag to pass full username@domain to spamc
+
+*DONE* Add recipient debug flag to help diagnose -u/-b/-B problems
+
+Allow customized reject message with -r.
+Option 1 - new flag. -R "go away"
+Option 2 - overload -r. -r "20,go away"
+
+Add a score range to -bBr:
+ -b ">5<20 bucket"
+ -r ">=20"
+
+Fix ipv6 crashes
+
+Add tcp_wrappers support to limit who can talk to our TCP socket
+
+Either keep the input body or a checksum of it, and only replace the
+body when SA changes it
+
+Collapse the variables running+connected+pid into one variable
--- /dev/null
+dnl BEGIN http://www.gnu.org/software/ac-archive/htmldoc/acx_pthread.html
+dnl $Id: ac_acx_pthread.m4,v 1.3 2004/09/07 01:02:58 dnelson Exp $
+dnl @synopsis ACX_PTHREAD([ACTION-IF-FOUND[, ACTION-IF-NOT-FOUND]])
+dnl
+dnl This macro figures out how to build C programs using POSIX
+dnl threads. It sets the PTHREAD_LIBS output variable to the threads
+dnl library and linker flags, and the PTHREAD_CFLAGS output variable
+dnl to any special C compiler flags that are needed. (The user can also
+dnl force certain compiler flags/libs to be tested by setting these
+dnl environment variables.)
+dnl
+dnl Also sets PTHREAD_CC to any special C compiler that is needed for
+dnl multi-threaded programs (defaults to the value of CC otherwise).
+dnl (This is necessary on AIX to use the special cc_r compiler alias.)
+dnl
+dnl If you are only building threads programs, you may wish to
+dnl use these variables in your default LIBS, CFLAGS, and CC:
+dnl
+dnl LIBS="$PTHREAD_LIBS $LIBS"
+dnl CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+dnl CC="$PTHREAD_CC"
+dnl
+dnl In addition, if the PTHREAD_CREATE_JOINABLE thread-attribute
+dnl constant has a nonstandard name, defines PTHREAD_CREATE_JOINABLE
+dnl to that name (e.g. PTHREAD_CREATE_UNDETACHED on AIX).
+dnl
+dnl ACTION-IF-FOUND is a list of shell commands to run if a threads
+dnl library is found, and ACTION-IF-NOT-FOUND is a list of commands
+dnl to run it if it is not found. If ACTION-IF-FOUND is not specified,
+dnl the default action will define HAVE_PTHREAD.
+dnl
+dnl Please let the authors know if this macro fails on any platform,
+dnl or if you have any other suggestions or comments. This macro was
+dnl based on work by SGJ on autoconf scripts for FFTW (www.fftw.org)
+dnl (with help from M. Frigo), as well as ac_pthread and hb_pthread
+dnl macros posted by AFC to the autoconf macro repository. We are also
+dnl grateful for the helpful feedback of numerous users.
+dnl
+dnl @version Id: acx_pthread.m4,v 1.10 2004-06-16
+dnl @author Steven G. Johnson <stevenj@alum.mit.edu> and Alejandro Forero Cuervo <bachue@bachue.com>
+
+AC_DEFUN([ACX_PTHREAD], [
+AC_REQUIRE([AC_CANONICAL_HOST])
+AC_LANG_SAVE
+AC_LANG_C
+acx_pthread_ok=no
+
+# We used to check for pthread.h first, but this fails if pthread.h
+# requires special compiler flags (e.g. on True64 or Sequent).
+# It gets checked for in the link test anyway.
+
+# First of all, check if the user has set any of the PTHREAD_LIBS,
+# etcetera environment variables, and if threads linking works using
+# them:
+if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ save_LIBS="$LIBS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ AC_MSG_CHECKING([for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS])
+ AC_TRY_LINK_FUNC(pthread_join, acx_pthread_ok=yes)
+ AC_MSG_RESULT($acx_pthread_ok)
+ if test x"$acx_pthread_ok" = xno; then
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+ fi
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+fi
+
+# We must check for the threads library under a number of different
+# names; the ordering is very important because some systems
+# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
+# libraries is broken (non-POSIX).
+
+# Create a list of thread flags to try. Items starting with a "-" are
+# C compiler flags, and other items are library names, except for "none"
+# which indicates that we try without any flags at all, and "pthread-config"
+# which is a program returning the flags for the Pth emulation library.
+
+acx_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+
+# The ordering *is* (sometimes) important. Some notes on the
+# individual items follow:
+
+# pthreads: AIX (must check this before -lpthread)
+# none: in case threads are in libc; should be tried before -Kthread and
+# other compiler flags to prevent continual compiler warnings
+# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
+# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
+# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
+# -pthreads: Solaris/gcc
+# -mthreads: Mingw32/gcc, Lynx/gcc
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+# doesn't hurt to check since this sometimes defines pthreads too;
+# also defines -D_REENTRANT)
+# pthread: Linux, etcetera
+# --thread-safe: KAI C++
+# pthread-config: use pthread-config program (for GNU Pth library)
+
+case "${host_cpu}-${host_os}" in
+ *solaris*)
+
+ # On Solaris (at least, for some versions), libc contains stubbed
+ # (non-functional) versions of the pthreads routines, so link-based
+ # tests will erroneously succeed. (We need to link with -pthread or
+ # -lpthread.) (The stubs are missing pthread_cleanup_push, or rather
+ # a function called by this macro, so we could check for that, but
+ # who knows whether they'll stub that too in a future libc.) So,
+ # we'll just look for -pthreads and -lpthread first:
+
+ acx_pthread_flags="-pthread -pthreads pthread -mt $acx_pthread_flags"
+ ;;
+esac
+
+if test x"$acx_pthread_ok" = xno; then
+for flag in $acx_pthread_flags; do
+
+ case $flag in
+ none)
+ AC_MSG_CHECKING([whether pthreads work without any flags])
+ ;;
+
+ -*)
+ AC_MSG_CHECKING([whether pthreads work with $flag])
+ PTHREAD_CFLAGS="$flag"
+ ;;
+
+ pthread-config)
+ AC_CHECK_PROG(acx_pthread_config, pthread-config, yes, no)
+ if test x"$acx_pthread_config" = xno; then continue; fi
+ PTHREAD_CFLAGS="`pthread-config --cflags`"
+ PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
+ ;;
+
+ *)
+ AC_MSG_CHECKING([for the pthreads library -l$flag])
+ PTHREAD_LIBS="-l$flag"
+ ;;
+ esac
+
+ save_LIBS="$LIBS"
+ save_CFLAGS="$CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+
+ # Check for various functions. We must include pthread.h,
+ # since some functions may be macros. (On the Sequent, we
+ # need a special flag -Kthread to make this header compile.)
+ # We check for pthread_join because it is in -lpthread on IRIX
+ # while pthread_create is in libc. We check for pthread_attr_init
+ # due to DEC craziness with -lpthreads. We check for
+ # pthread_cleanup_push because it is one of the few pthread
+ # functions on Solaris that doesn't have a non-functional libc stub.
+ # We try pthread_create on general principles.
+ AC_TRY_LINK([#include <pthread.h>],
+ [pthread_t th; pthread_join(th, 0);
+ pthread_attr_init(0); pthread_cleanup_push(0, 0);
+ pthread_create(0,0,0,0); pthread_cleanup_pop(0); ],
+ [acx_pthread_ok=yes])
+
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+
+ AC_MSG_RESULT($acx_pthread_ok)
+ if test "x$acx_pthread_ok" = xyes; then
+ break;
+ fi
+
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+done
+fi
+
+# Various other checks:
+if test "x$acx_pthread_ok" = xyes; then
+ save_LIBS="$LIBS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+
+ # Detect AIX lossage: threads are created detached by default
+ # and the JOINABLE attribute has a nonstandard name (UNDETACHED).
+ AC_MSG_CHECKING([for joinable pthread attribute])
+ AC_TRY_LINK([#include <pthread.h>],
+ [int attr=PTHREAD_CREATE_JOINABLE;],
+ ok=PTHREAD_CREATE_JOINABLE, ok=unknown)
+ if test x"$ok" = xunknown; then
+ AC_TRY_LINK([#include <pthread.h>],
+ [int attr=PTHREAD_CREATE_UNDETACHED;],
+ ok=PTHREAD_CREATE_UNDETACHED, ok=unknown)
+ fi
+ if test x"$ok" != xPTHREAD_CREATE_JOINABLE; then
+ AC_DEFINE(PTHREAD_CREATE_JOINABLE, $ok,
+ [Define to the necessary symbol if this constant
+ uses a non-standard name on your system.])
+ fi
+ AC_MSG_RESULT(${ok})
+ if test x"$ok" = xunknown; then
+ AC_MSG_WARN([we do not know how to create joinable pthreads])
+ fi
+
+ AC_MSG_CHECKING([if more special flags are required for pthreads])
+ flag=no
+ case "${host_cpu}-${host_os}" in
+ *-aix* | *-freebsd* | *-darwin*) flag="-D_THREAD_SAFE";;
+ *solaris* | *-osf* | *-hpux*) flag="-D_REENTRANT";;
+ esac
+ AC_MSG_RESULT(${flag})
+ if test "x$flag" != xno; then
+ PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
+ fi
+
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+
+ # More AIX lossage: must compile with cc_r
+ AC_CHECK_PROG(PTHREAD_CC, cc_r, cc_r, ${CC})
+else
+ PTHREAD_CC="$CC"
+fi
+
+AC_SUBST(PTHREAD_LIBS)
+AC_SUBST(PTHREAD_CFLAGS)
+AC_SUBST(PTHREAD_CC)
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test x"$acx_pthread_ok" = xyes; then
+ ifelse([$1],,AC_DEFINE(HAVE_PTHREAD,1,[Define if you have POSIX threads libraries and header files.]),[$1])
+ :
+else
+ acx_pthread_ok=no
+ $2
+fi
+AC_LANG_RESTORE
+])dnl ACX_PTHREAD
+dnl END http://www.gnu.org/software/ac-archive/htmldoc/acx_pthread.html
--- /dev/null
+dnl BEGIN CF_GNU_SOURCE from lynx 2.8.5 distibution
+dnl $Id: ac_cf_gnu_source.m4,v 1.1 2003/06/07 02:56:50 dnelson Exp $
+dnl ---------------------------------------------------------------------------
+dnl Check if we must define _GNU_SOURCE to get a reasonable value for
+dnl _XOPEN_SOURCE, upon which many POSIX definitions depend. This is a defect
+dnl (or misfeature) of glibc2, which breaks portability of many applications,
+dnl since it is interwoven with GNU extensions.
+dnl
+dnl Well, yes we could work around it...
+AC_DEFUN([CF_GNU_SOURCE],
+[
+AC_CACHE_CHECK(if we must define _GNU_SOURCE,cf_cv_gnu_source,[
+AC_TRY_COMPILE([#include <sys/types.h>],[
+#ifndef _XOPEN_SOURCE
+make an error
+#endif],
+ [cf_cv_gnu_source=no],
+ [cf_save="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS -D_GNU_SOURCE"
+ AC_TRY_COMPILE([#include <sys/types.h>],[
+#ifdef _XOPEN_SOURCE
+make an error
+#endif],
+ [cf_cv_gnu_source=no],
+ [cf_cv_gnu_source=yes])
+ CPPFLAGS="$cf_save"
+ ])
+])
+test "$cf_cv_gnu_source" = yes && CPPFLAGS="$CPPFLAGS -D_GNU_SOURCE"
+])dnl
+dnl END CF_GNU_SOURCE from lynx 2.8.5 distibution
--- /dev/null
+dnl Available from the GNU Autoconf Macro Archive at:
+dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_cxx_exceptions.html
+dnl @version Id: 1.3 2004-02-04
+dnl
+dnl $Id: ac_cxx_exceptions.m4,v 1.2 2004/09/07 01:19:26 dnelson Exp $
+AC_DEFUN([AC_CXX_EXCEPTIONS],
+[AC_CACHE_CHECK(whether the compiler supports exceptions,
+ac_cv_cxx_exceptions,
+[AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ AC_TRY_COMPILE(,[try { throw 1; } catch (int i) { return i; }],
+ ac_cv_cxx_exceptions=yes, ac_cv_cxx_exceptions=no)
+ AC_LANG_RESTORE
+])
+if test "$ac_cv_cxx_exceptions" = yes; then
+ AC_DEFINE(HAVE_EXCEPTIONS,,[define if the compiler supports exceptions])
+fi
+])
--- /dev/null
+dnl Available from the GNU Autoconf Macro Archive at:
+dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_cxx_namespaces.html
+dnl
+dnl $Id: ac_cxx_namespaces.m4,v 1.2 2004/09/07 01:19:27 dnelson Exp $
+dnl @version: 1.3 2004-02-04
+AC_DEFUN([AC_CXX_NAMESPACES],
+[AC_CACHE_CHECK(whether the compiler implements namespaces,
+ac_cv_cxx_namespaces,
+[AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ AC_TRY_COMPILE([namespace Outer { namespace Inner { int i = 0; }}],
+ [using namespace Outer::Inner; return i;],
+ ac_cv_cxx_namespaces=yes, ac_cv_cxx_namespaces=no)
+ AC_LANG_RESTORE
+])
+if test "$ac_cv_cxx_namespaces" = yes; then
+ AC_DEFINE(HAVE_NAMESPACES,,[define if the compiler implements namespaces])
+fi
+])
--- /dev/null
+dnl Available from the GNU Autoconf Macro Archive at:
+dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_cxx_verbose_terminate_handler.html
+dnl
+dnl $Id: ac_cxx_verbose_terminate_handler.m4,v 1.2 2004/09/07 01:19:27 dnelson Exp $
+dnl @version: 1.1 (last modified: 2003-01-20)
+AC_DEFUN([AC_CXX_VERBOSE_TERMINATE_HANDLER],
+[AC_CACHE_CHECK(whether the compiler has __gnu_cxx::__verbose_terminate_handler,
+ac_cv_verbose_terminate_handler,
+[
+ AC_REQUIRE([AC_CXX_EXCEPTIONS])
+ AC_REQUIRE([AC_CXX_NAMESPACES])
+ AC_LANG_SAVE
+ AC_LANG_CPLUSPLUS
+ AC_TRY_COMPILE(
+ [#include <exception>], [std::set_terminate(__gnu_cxx::__verbose_terminate_handler);],
+ ac_cv_verbose_terminate_handler=yes, ac_cv_verbose_terminate_handler=no
+ )
+ AC_LANG_RESTORE
+])
+if test "$ac_cv_verbose_terminate_handler" = yes; then
+ AC_DEFINE(HAVE_VERBOSE_TERMINATE_HANDLER, , [define if the compiler has __gnu_cxx::__verbose_terminate_handler])
+fi
+])
--- /dev/null
+## ----------------------------------- ##
+## Check if --with-dmalloc was given. ##
+## ----------------------------------- ##
+
+# serial 1
+
+AC_DEFUN([DN_WITH_DMALLOC],
+[AC_MSG_CHECKING([if malloc debugging is wanted])
+AC_ARG_WITH(dmalloc,
+[ --with-dmalloc use dmalloc ( http://www.dmalloc.com )],
+[if test "$withval" = yes; then
+ AC_MSG_RESULT(yes)
+ AC_DEFINE(WITH_DMALLOC,1,
+ [Define if using the dmalloc debugging malloc package])
+ AC_CHECK_HEADERS(dmalloc.h)
+ AC_CHECK_LIB(dmallocthcxx, dmalloc_malloc,,AC_MSG_ERROR([Threaded C++ dmalloc library not found]))
+else
+ AC_MSG_RESULT(no)
+fi], [AC_MSG_RESULT(no)])
+])
--- /dev/null
+dnl AC_SYS_COMPILER_FLAG, taken from the Pike 7.5 distribution at http://pike.ida.liu.se
+dnl $Id: ac_pike_compiler_flag.m4,v 1.3 2004/05/13 21:50:08 dnelson Exp $
+
+# option, cache_name, variable, do_if_failed, do_if_ok
+AC_DEFUN([AC_PIKE_COMPILER_FLAG],
+[
+ AC_MSG_CHECKING(for $1)
+ AC_CACHE_VAL(pike_cv_option_$2,
+ [
+ OLD_CPPFLAGS="[$]CPPFLAGS"
+ CPPFLAGS="[$]OLD_CPPFLAGS $1"
+ old_ac_link="[$]ac_link"
+ ac_link="[$]old_ac_link 2>conftezt.out.2"
+ AC_TRY_RUN([
+ int foo;
+ int main(int argc, char **argv)
+ {
+ /* The following code triggs gcc:s generation of aline opcodes,
+ * which some versions of as does not support.
+ */
+ if (argc > 0) argc = 0;
+ return argc;
+ }
+ ],pike_cv_option_$2=yes,
+ pike_cv_option_$2=no, [
+ AC_TRY_LINK([], [], pike_cv_option_$2=yes, pike_cv_option_$2=no)
+ ])
+ if grep -i 'unrecognized option' <conftezt.out.2 >/dev/null; then
+ pike_cv_option_$2=no
+ elif grep -i 'unknown option' <conftezt.out.2 >/dev/null; then
+ # cc/HPUX says the following regarding -q64:
+ #
+ # cc: warning 422: Unknown option "6" ignored.
+ # cc: warning 422: Unknown option "4" ignored.
+ pike_cv_option_$2=no
+ elif grep -i 'optimizer bugs' <conftezt.out.2 >/dev/null; then
+ # gcc/FreeBSD-4.6/alpha says the following regarding -O2:
+ #
+ # cc1: warning:
+ # ***
+ # *** The -O2 flag TRIGGERS KNOWN OPTIMIZER BUGS ON THIS PLATFORM
+ # ***
+ pike_cv_option_$2=no
+ elif grep -i 'not found' <conftezt.out.2 >/dev/null; then
+ # cc/AIX says the following regarding +O3:
+ #
+ # cc: 1501-228 input file +O3 not found
+ pike_cv_option_$2=no
+ elif grep -i 'ignored' <conftezt.out.2 >/dev/null; then
+ # gcc/AIX says the following regarding -fpic:
+ #
+ # cc1: warning: -fpic ignored (all code is position independent)
+ pike_cv_option_$2=no
+ else :; fi
+ rm conftezt.out.2
+ CPPFLAGS="[$]OLD_CPPFLAGS"
+ ac_link="[$]old_ac_link"
+ ])
+
+ if test x"[$]pike_cv_option_$2" = "xyes" ; then
+ $3="[$]$3 $1"
+ case "$3" in
+ OPTIMIZE)
+ CFLAGS="[$]CFLAGS $1"
+ ;;
+ esac
+ AC_MSG_RESULT(yes)
+ $5
+ else
+ AC_MSG_RESULT(no)
+ $4
+ fi
+])
--- /dev/null
+dnl Available from the GNU Autoconf Macro Archive at:
+dnl http://www.gnu.org/software/ac-archive/htmldoc/vl_prog_cc_warnings.html
+dnl
+dnl $Id: ac_vl_prog_cc_warnings.m4,v 1.1 2003/06/07 19:43:20 dnelson Exp $
+AC_DEFUN([VL_PROG_CC_WARNINGS], [
+ ansi=$1
+ if test -z "$ansi"; then
+ msg="for C compiler warning flags"
+ else
+ msg="for C compiler warning and ANSI conformance flags"
+ fi
+ AC_CACHE_CHECK($msg, vl_cv_prog_cc_warnings, [
+ if test -n "$CC"; then
+ cat > conftest.c <<EOF
+int main(int argc, char **argv) { return 0; }
+EOF
+
+ dnl GCC
+ if test "$GCC" = "yes"; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="-Wall"
+ else
+ vl_cv_prog_cc_warnings="-Wall -ansi -pedantic"
+ fi
+
+ dnl Most compilers print some kind of a version string with some command
+ dnl line options (often "-V"). The version string should be checked
+ dnl before doing a test compilation run with compiler-specific flags.
+ dnl This is because some compilers (like the Cray compiler) only
+ dnl produce a warning message for unknown flags instead of returning
+ dnl an error, resulting in a false positive. Also, compilers may do
+ dnl erratic things when invoked with flags meant for a different
+ dnl compiler.
+
+ dnl Solaris C compiler
+ elif $CC -V 2>&1 | grep -i "WorkShop" > /dev/null 2>&1 &&
+ $CC -c -v -Xc conftest.c > /dev/null 2>&1 &&
+ test -f conftest.o; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="-v"
+ else
+ vl_cv_prog_cc_warnings="-v -Xc"
+ fi
+
+ dnl Digital Unix C compiler
+ elif $CC -V 2>&1 | grep -i "Digital UNIX Compiler" > /dev/null 2>&1 &&
+ $CC -c -verbose -w0 -warnprotos -std1 conftest.c > /dev/null 2>&1 &&
+ test -f conftest.o; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="-verbose -w0 -warnprotos"
+ else
+ vl_cv_prog_cc_warnings="-verbose -w0 -warnprotos -std1"
+ fi
+
+ dnl C for AIX Compiler
+ elif $CC 2>&1 | grep -i "C for AIX Compiler" > /dev/null 2>&1 &&
+ $CC -c -qlanglvl=ansi -qinfo=all conftest.c > /dev/null 2>&1 &&
+ test -f conftest.o; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="-qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd"
+ else
+ vl_cv_prog_cc_warnings="-qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd -qlanglvl=ansi"
+ fi
+
+ dnl IRIX C compiler
+ elif $CC -version 2>&1 | grep -i "MIPSpro Compilers" > /dev/null 2>&1 &&
+ $CC -c -fullwarn -ansi -ansiE conftest.c > /dev/null 2>&1 &&
+ test -f conftest.o; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="-fullwarn"
+ else
+ vl_cv_prog_cc_warnings="-fullwarn -ansi -ansiE"
+ fi
+
+ dnl HP-UX C compiler
+ elif what $CC 2>&1 | grep -i "HP C Compiler" > /dev/null 2>&1 &&
+ $CC -c -Aa +w1 conftest.c > /dev/null 2>&1 &&
+ test -f conftest.o; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="+w1"
+ else
+ vl_cv_prog_cc_warnings="+w1 -Aa"
+ fi
+
+ dnl The NEC SX-5 (Super-UX 10) C compiler
+ elif $CC -V 2>&1 | grep "/SX" > /dev/null 2>&1 &&
+ $CC -c -pvctl[,]fullmsg -Xc conftest.c > /dev/null 2>&1 &&
+ test -f conftest.o; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="-pvctl[,]fullmsg"
+ else
+ vl_cv_prog_cc_warnings="-pvctl[,]fullmsg -Xc"
+ fi
+
+ dnl The Cray C compiler (Unicos)
+ elif $CC -V 2>&1 | grep -i "Cray" > /dev/null 2>&1 &&
+ $CC -c -h msglevel 2 conftest.c > /dev/null 2>&1 &&
+ test -f conftest.o; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="-h msglevel 2"
+ else
+ vl_cv_prog_cc_warnings="-h msglevel 2 -h conform"
+ fi
+
+ dnl Intel's C Compler (icc)
+ elif $CC -V 2>&1 | grep -i "Intel(R) C++ Compiler" > /dev/null 2>&1 &&
+ $CC -c -Wall -wd981,1418,193 conftest.c > /dev/null 2>&1 &&
+ test -f conftest.o; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="-Wall -wd981,1418,193"
+ else
+ vl_cv_prog_cc_warnings="-Wall -wd981,1418,193 -Xc"
+ fi
+
+ fi
+ rm -f conftest.*
+ fi
+ if test -n "$vl_cv_prog_cc_warnings"; then
+ VL_WARN_CFLAGS="$vl_cv_prog_cc_warnings"
+ else
+ vl_cv_prog_cc_warnings="unknown"
+ fi
+ ])
+])dnl
--- /dev/null
+# generated automatically by aclocal 1.9.4 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+# Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# -*- Autoconf -*-
+# Copyright (C) 2002, 2003 Free Software Foundation, Inc.
+# Generated from amversion.in; do not edit by hand.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+ [AM_AUTOMAKE_VERSION([1.9.4])])
+
+# AM_AUX_DIR_EXPAND
+
+# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 6
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# serial 7 -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
+# Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
+# Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+#serial 2
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 7
+
+# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
+AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# This macro actually does too much some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+# Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 11
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.58])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $1 | $1:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+
+# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# -*- Autoconf -*-
+# Copyright (C) 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 1
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 2
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# -*- Autoconf -*-
+
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 3
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+
+# Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
+# created by `make install' are always world readable, even if the
+# installer happens to have an overly restrictive umask (e.g. 077).
+# This was a mistake. There are at least two reasons why we must not
+# use `-m 0755':
+# - it causes special bits like SGID to be ignored,
+# - it may be too restrictive (some setups expect 775 directories).
+#
+# Do not use -m 0755 and let people choose whatever they expect by
+# setting umask.
+#
+# We cannot accept any implementation of `mkdir' that recognizes `-p'.
+# Some implementations (such as Solaris 8's) are not thread-safe: if a
+# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
+# concurrently, both version can detect that a/ is missing, but only
+# one can create it and the other will error out. Consequently we
+# restrict ourselves to GNU make (using the --version option ensures
+# this.)
+AC_DEFUN([AM_PROG_MKDIR_P],
+[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ # We used to keeping the `.' as first argument, in order to
+ # allow $(mkdir_p) to be used without argument. As in
+ # $(mkdir_p) $(somedir)
+ # where $(somedir) is conditionally defined. However this is wrong
+ # for two reasons:
+ # 1. if the package is installed by a user who cannot write `.'
+ # make install will fail,
+ # 2. the above comment should most certainly read
+ # $(mkdir_p) $(DESTDIR)$(somedir)
+ # so it does not work when $(somedir) is undefined and
+ # $(DESTDIR) is not.
+ # To support the latter case, we have to write
+ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+ # so the `.' trick is pointless.
+ mkdir_p='mkdir -p --'
+else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ for d in ./-p ./--version;
+ do
+ test -d $d && rmdir $d
+ done
+ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+ if test -f "$ac_aux_dir/mkinstalldirs"; then
+ mkdir_p='$(mkinstalldirs)'
+ else
+ mkdir_p='$(install_sh) -d'
+ fi
+fi
+AC_SUBST([mkdir_p])])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 2
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 3
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# AM_PROG_INSTALL_STRIP
+
+# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 1
+
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([ac_acx_pthread.m4])
+m4_include([ac_cf_gnu_source.m4])
+m4_include([ac_cxx_exceptions.m4])
+m4_include([ac_cxx_namespaces.m4])
+m4_include([ac_cxx_verbose_terminate_handler.m4])
+m4_include([ac_dmalloc.m4])
+m4_include([ac_pike_compiler_flag.m4])
+m4_include([ac_vl_prog_cc_warnings.m4])
--- /dev/null
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+
+timestamp='2003-07-02'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Per Bothner <per@bothner.com>.
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit build system type.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit 0 ;;
+ --version | -v )
+ echo "$version" ; exit 0 ;;
+ --help | --h* | -h )
+ echo "$usage"; exit 0 ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep __ELF__ >/dev/null
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit 0 ;;
+ amiga:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ arc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ hp300:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mac68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ macppc:OpenBSD:*:*)
+ echo powerpc-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme88k:OpenBSD:*:*)
+ echo m88k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvmeppc:OpenBSD:*:*)
+ echo powerpc-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ pmax:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sgi:OpenBSD:*:*)
+ echo mipseb-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sun3:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ wgrisc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ *:OpenBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ alpha:OSF1:*:*)
+ if test $UNAME_RELEASE = "V4.0"; then
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ fi
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE="alpha" ;;
+ "EV5 (21164)")
+ UNAME_MACHINE="alphaev5" ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE="alphaev56" ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE="alphapca56" ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE="alphapca57" ;;
+ "EV6 (21264)")
+ UNAME_MACHINE="alphaev6" ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE="alphaev67" ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE="alphaev69" ;;
+ "EV7 (21364)")
+ UNAME_MACHINE="alphaev7" ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE="alphaev79" ;;
+ esac
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ exit 0 ;;
+ Alpha*:OpenVMS:*:*)
+ echo alpha-hp-vms
+ exit 0 ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit 0 ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit 0 ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit 0;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit 0 ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
+ exit 0 ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit 0 ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit 0;;
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit 0;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit 0 ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit 0 ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit 0 ;;
+ DRS?6000:UNIX_SV:4.2*:7*)
+ case `/usr/bin/uname -p` in
+ sparc) echo sparc-icl-nx7 && exit 0 ;;
+ esac ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ i86pc:SunOS:5.*:*)
+ echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit 0 ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit 0 ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit 0 ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit 0 ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit 0 ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit 0 ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit 0 ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit 0 ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit 0 ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit 0 ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit 0 ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit 0 ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c \
+ && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+ && exit 0
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit 0 ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit 0 ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit 0 ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+ exit 0 ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit 0 ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit 0 ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit 0 ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit 0 ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit 0 ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit 0 ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit 0 ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit 0 ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit 0 ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i*86:AIX:*:*)
+ echo i386-ibm-aix
+ exit 0 ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+ exit 0 ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+ echo rs6000-ibm-aix3.2.5
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit 0 ;;
+ *:AIX:*:[45])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit 0 ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit 0 ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit 0 ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit 0 ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit 0 ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit 0 ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit 0 ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit 0 ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ esac ;;
+ esac
+ fi
+ if [ "${HP_ARCH}" = "" ]; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
+ esac
+ if [ ${HP_ARCH} = "hppa2.0w" ]
+ then
+ # avoid double evaluation of $set_cc_for_build
+ test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
+ then
+ HP_ARCH="hppa2.0w"
+ else
+ HP_ARCH="hppa64"
+ fi
+ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit 0 ;;
+ ia64:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux${HPUX_REV}
+ exit 0 ;;
+ 3050*:HI-UX:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+ echo unknown-hitachi-hiuxwe2
+ exit 0 ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit 0 ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit 0 ;;
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit 0 ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit 0 ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit 0 ;;
+ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit 0 ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit 0 ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit 0 ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit 0 ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit 0 ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit 0 ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit 0 ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ *:UNICOS/mp:*:*)
+ echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit 0 ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ *:FreeBSD:*:*|*:GNU/FreeBSD:*:*)
+ # Determine whether the default compiler uses glibc.
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <features.h>
+ #if __GLIBC__ >= 2
+ LIBC=gnu
+ #else
+ LIBC=
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+ # GNU/FreeBSD systems have a "k" prefix to indicate we are using
+ # FreeBSD's kernel, but not the complete OS.
+ case ${LIBC} in gnu) kernel_only='k' ;; esac
+ echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
+ exit 0 ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit 0 ;;
+ i*:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit 0 ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit 0 ;;
+ x86:Interix*:[34]*)
+ echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
+ exit 0 ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+ exit 0 ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i586-pc-interix
+ exit 0 ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit 0 ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit 0 ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ *:GNU:*:*)
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit 0 ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit 0 ;;
+ arm*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ cris:Linux:*:*)
+ echo cris-axis-linux-gnu
+ exit 0 ;;
+ ia64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ mips:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef mips
+ #undef mipsel
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=mipsel
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=mips
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+ ;;
+ mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef mips64
+ #undef mips64el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=mips64el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=mips64
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+ ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-gnu
+ exit 0 ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-gnu
+ exit 0 ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+ exit 0 ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+ PA7*) echo hppa1.1-unknown-linux-gnu ;;
+ PA8*) echo hppa2.0-unknown-linux-gnu ;;
+ *) echo hppa-unknown-linux-gnu ;;
+ esac
+ exit 0 ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-gnu
+ exit 0 ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux
+ exit 0 ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ sh*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ x86_64:Linux:*:*)
+ echo x86_64-unknown-linux-gnu
+ exit 0 ;;
+ i*86:Linux:*:*)
+ # The BFD linker knows what the default object file format is, so
+ # first see if it will tell us. cd to the root directory to prevent
+ # problems with other programs or directories called `ld' in the path.
+ # Set LC_ALL=C to ensure ld outputs messages in English.
+ ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
+ | sed -ne '/supported targets:/!d
+ s/[ ][ ]*/ /g
+ s/.*supported targets: *//
+ s/ .*//
+ p'`
+ case "$ld_supported_targets" in
+ elf32-i386)
+ TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+ ;;
+ a.out-i386-linux)
+ echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+ exit 0 ;;
+ coff-i386)
+ echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+ exit 0 ;;
+ "")
+ # Either a pre-BFD a.out linker (linux-gnuoldld) or
+ # one that does not give us useful --help.
+ echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+ exit 0 ;;
+ esac
+ # Determine whether the default compiler is a.out or elf
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <features.h>
+ #ifdef __ELF__
+ # ifdef __GLIBC__
+ # if __GLIBC__ >= 2
+ LIBC=gnu
+ # else
+ LIBC=gnulibc1
+ # endif
+ # else
+ LIBC=gnulibc1
+ # endif
+ #else
+ #ifdef __INTEL_COMPILER
+ LIBC=gnu
+ #else
+ LIBC=gnuaout
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+ test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
+ test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+ ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
+ echo i386-sequent-sysv4
+ exit 0 ;;
+ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit 0 ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit 0 ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit 0 ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit 0 ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit 0 ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit 0 ;;
+ i*86:*:5:[78]*)
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ exit 0 ;;
+ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit 0 ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i386.
+ echo i386-pc-msdosdjgpp
+ exit 0 ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit 0 ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit 0 ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit 0 ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit 0 ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit 0 ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit 0 ;;
+ M68*:*:R3V[567]*:*)
+ test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+ 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && echo i486-ncr-sysv4 && exit 0 ;;
+ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit 0 ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+ echo powerpc-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit 0 ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit 0 ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit 0 ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit 0 ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit 0 ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit 0 ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit 0 ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+ exit 0 ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit 0 ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit 0 ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit 0 ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit 0 ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit 0 ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+ *:Darwin:*:*)
+ case `uname -p` in
+ *86) UNAME_PROCESSOR=i686 ;;
+ powerpc) UNAME_PROCESSOR=powerpc ;;
+ esac
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit 0 ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = "x86"; then
+ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ exit 0 ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit 0 ;;
+ NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit 0 ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+ exit 0 ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit 0 ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit 0 ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = "386"; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit 0 ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit 0 ;;
+ *:TENEX:*:*)
+ echo pdp10-unknown-tenex
+ exit 0 ;;
+ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ echo pdp10-dec-tops20
+ exit 0 ;;
+ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ echo pdp10-xkl-tops20
+ exit 0 ;;
+ *:TOPS-20:*:*)
+ echo pdp10-unknown-tops20
+ exit 0 ;;
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+ exit 0 ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
+ exit 0 ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
+ I don't know.... */
+ printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+ printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+ "4"
+#else
+ ""
+#endif
+ ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+ printf ("arm-acorn-riscix"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+ printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+ int version;
+ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+ if (version < 4)
+ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+ else
+ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+ exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+ printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+ printf ("ns32k-encore-mach\n"); exit (0);
+#else
+ printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+ printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+ printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+ printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+ struct utsname un;
+
+ uname(&un);
+
+ if (strncmp(un.version, "V2", 2) == 0) {
+ printf ("i386-sequent-ptx2\n"); exit (0);
+ }
+ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+ printf ("i386-sequent-ptx1\n"); exit (0);
+ }
+ printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+# include <sys/param.h>
+# if defined (BSD)
+# if BSD == 43
+ printf ("vax-dec-bsd4.3\n"); exit (0);
+# else
+# if BSD == 199006
+ printf ("vax-dec-bsd4.3reno\n"); exit (0);
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# endif
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# else
+ printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+ printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+ exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+ exit 0 ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit 0 ;;
+ c34*)
+ echo c34-convex-bsd
+ exit 0 ;;
+ c38*)
+ echo c38-convex-bsd
+ exit 0 ;;
+ c4*)
+ echo c4-convex-bsd
+ exit 0 ;;
+ esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+ ftp://ftp.gnu.org/pub/gnu/config/
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+/* config.h.in. Generated from configure.in by autoheader. */
+
+/* Define to 1 if you have the `asprintf' function. */
+#undef HAVE_ASPRINTF
+
+/* Define to 1 if you have the `daemon' function. */
+#undef HAVE_DAEMON
+
+/* Define to 1 if you have the declaration of `daemon', and to 0 if you don't.
+ */
+#undef HAVE_DECL_DAEMON
+
+/* Define to 1 if you have the declaration of `strsep', and to 0 if you don't.
+ */
+#undef HAVE_DECL_STRSEP
+
+/* Define to 1 if you have the <dmalloc.h> header file. */
+#undef HAVE_DMALLOC_H
+
+/* define if the compiler supports exceptions */
+#undef HAVE_EXCEPTIONS
+
+/* Define to 1 if you have the <fcntl.h> header file. */
+#undef HAVE_FCNTL_H
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `dmallocthcxx' library (-ldmallocthcxx). */
+#undef HAVE_LIBDMALLOCTHCXX
+
+/* Define to 1 if you have the `milter' library (-lmilter). */
+#undef HAVE_LIBMILTER
+
+/* Define to 1 if you have the <libmilter/mfapi.h> header file. */
+#undef HAVE_LIBMILTER_MFAPI_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* define if the compiler implements namespaces */
+#undef HAVE_NAMESPACES
+
+/* Define to 1 if you have the <poll.h> header file. */
+#undef HAVE_POLL_H
+
+/* Define if you have POSIX threads libraries and header files. */
+#undef HAVE_PTHREAD
+
+/* Define to 1 if you have the `snprintf' function. */
+#undef HAVE_SNPRINTF
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strsep' function. */
+#undef HAVE_STRSEP
+
+/* Define to 1 if you have the <syslog.h> header file. */
+#undef HAVE_SYSLOG_H
+
+/* Define to 1 if you have the <sys/cdefs.h> header file. */
+#undef HAVE_SYS_CDEFS_H
+
+/* Define to 1 if you have the <sys/select.h> header file. */
+#undef HAVE_SYS_SELECT_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have <sys/wait.h> that is POSIX.1 compatible. */
+#undef HAVE_SYS_WAIT_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the `vasprintf' function. */
+#undef HAVE_VASPRINTF
+
+/* define if the compiler has __gnu_cxx::__verbose_terminate_handler */
+#undef HAVE_VERBOSE_TERMINATE_HANDLER
+
+/* Define to 1 if you have the `vsnprintf' function. */
+#undef HAVE_VSNPRINTF
+
+/* Define to 1 if you have the `vsyslog' function. */
+#undef HAVE_VSYSLOG
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to the necessary symbol if this constant uses a non-standard name on
+ your system. */
+#undef PTHREAD_CREATE_JOINABLE
+
+/* Path to sendmail */
+#undef SENDMAIL
+
+/* Path to spamc */
+#undef SPAMC
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Version number of package */
+#undef VERSION
+
+/* Define if using the dmalloc debugging malloc package */
+#undef WITH_DMALLOC
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `int' if <sys/types.h> does not define. */
+#undef pid_t
+
+/* Define to `unsigned' if <sys/types.h> does not define. */
+#undef size_t
--- /dev/null
+#! /bin/sh
+# Configuration validation subroutine script.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+
+timestamp='2003-07-04'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine. It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit 0 ;;
+ --version | -v )
+ echo "$version" ; exit 0 ;;
+ --help | --h* | -h )
+ echo "$usage"; exit 0 ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit 0;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | kfreebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis)
+ os=
+ basic_machine=$1
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ 1750a | 580 \
+ | a29k \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+ | c4x | clipper \
+ | d10v | d30v | dlx | dsp16xx \
+ | fr30 | frv \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | i370 | i860 | i960 | ia64 \
+ | ip2k \
+ | m32r | m68000 | m68k | m88k | mcore \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64vr | mips64vrel \
+ | mips64orion | mips64orionel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
+ | msp430 \
+ | ns16k | ns32k \
+ | openrisc | or32 \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+ | pyramid \
+ | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+ | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
+ | strongarm \
+ | tahoe | thumb | tic4x | tic80 | tron \
+ | v850 | v850e \
+ | we32k \
+ | x86 | xscale | xstormy16 | xtensa \
+ | z8k)
+ basic_machine=$basic_machine-unknown
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12)
+ # Motorola 68HC11/12.
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i*86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ 580-* \
+ | a29k-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | amd64-* | arc-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* \
+ | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+ | clipper-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
+ | elxsi-* \
+ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | i*86-* | i860-* | i960-* | ia64-* \
+ | ip2k-* \
+ | m32r-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+ | m88110-* | m88k-* | mcore-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64vr-* | mips64vrel-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipstx39-* | mipstx39el-* \
+ | msp430-* \
+ | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+ | pyramid-* \
+ | romp-* | rs6000-* \
+ | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
+ | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+ | tahoe-* | thumb-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tron-* \
+ | v850-* | v850e-* | vax-* \
+ | we32k-* \
+ | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
+ | xtensa-* \
+ | ymp-* \
+ | z8k-*)
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ c90)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | j90)
+ basic_machine=j90-cray
+ os=-unicos
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ decsystem10* | dec10*)
+ basic_machine=pdp10-dec
+ os=-tops10
+ ;;
+ decsystem20* | dec20*)
+ basic_machine=pdp10-dec
+ os=-tops20
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ go32)
+ basic_machine=i386-pc
+ os=-go32
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+# I'm not sure what "Sysv32" means. Should this be sysv3.2?
+ i*86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i*86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i*86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i*86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ mingw32)
+ basic_machine=i386-pc
+ os=-mingw32
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ mmix*)
+ basic_machine=mmix-knuth
+ os=-mmixware
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ morphos)
+ basic_machine=powerpc-unknown
+ os=-morphos
+ ;;
+ msdos)
+ basic_machine=i386-pc
+ os=-msdos
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ nv1)
+ basic_machine=nv1-cray
+ os=-unicosmp
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ or32 | or32-*)
+ basic_machine=or32-unknown
+ os=-coff
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2 | pentiumiii | pentium3)
+ basic_machine=i686-pc
+ ;;
+ pentium4)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=power-ibm
+ ;;
+ ppc) basic_machine=powerpc-unknown
+ ;;
+ ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64) basic_machine=powerpc64-unknown
+ ;;
+ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ basic_machine=powerpc64le-unknown
+ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ s390 | s390-*)
+ basic_machine=s390-ibm
+ ;;
+ s390x | s390x-*)
+ basic_machine=s390x-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
+ t90)
+ basic_machine=t90-cray
+ os=-unicos
+ ;;
+ tic54x | c54x*)
+ basic_machine=tic54x-unknown
+ os=-coff
+ ;;
+ tic55x | c55x*)
+ basic_machine=tic55x-unknown
+ os=-coff
+ ;;
+ tic6x | c6x*)
+ basic_machine=tic6x-unknown
+ os=-coff
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ toad1)
+ basic_machine=pdp10-xkl
+ os=-tops20
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp10)
+ # there are many clones, so DEC is not a safe bet
+ basic_machine=pdp10-unknown
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparc | sparcv9 | sparcv9b)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -netbsd* | -openbsd* | -kfreebsd* | -freebsd* | -riscix* \
+ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* \
+ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i*86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto-qnx*)
+ ;;
+ -nto*)
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -atheos*)
+ os=-atheos
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -nova*)
+ os=-rtmk-nova
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -aros*)
+ os=-aros
+ ;;
+ -kaos*)
+ os=-kaos
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ # This also exists in the configure program, but was not the
+ # default.
+ # os=-sunos4
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ or32-*)
+ os=-coff
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f30[01]-fujitsu | f700-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
+ -vos*)
+ vendor=stratus
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
--- /dev/null
+#! /bin/sh
+# From configure.in Revision: 1.41 .
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.59 for spamass-milter 0.3.0.
+#
+# Copyright (C) 2003 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+exec 6>&1
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_config_libobj_dir=.
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete. It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
+# Identity of this package.
+PACKAGE_NAME='spamass-milter'
+PACKAGE_TARNAME='spamass-milter'
+PACKAGE_VERSION='0.3.0'
+PACKAGE_STRING='spamass-milter 0.3.0'
+PACKAGE_BUGREPORT=''
+
+ac_unique_file="spamass-milter.cpp"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#if HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#if HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#if STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# if HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#if HAVE_STRING_H
+# if !STDC_HEADERS && HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#if HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#if HAVE_INTTYPES_H
+# include <inttypes.h>
+#else
+# if HAVE_STDINT_H
+# include <stdint.h>
+# endif
+#endif
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CXX CXXFLAGS LDFLAGS CPPFLAGS ac_ct_CXX EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CC CFLAGS ac_ct_CC CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE SPAMC SENDMAIL NROFF HAVE_MDOC_TRUE HAVE_MDOC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os acx_pthread_config PTHREAD_CC PTHREAD_LIBS PTHREAD_CFLAGS CXXCPP EGREP LIBOBJS LTLIBOBJS'
+ac_subst_files=''
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+ac_prev=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval "$ac_prev=\$ac_option"
+ ac_prev=
+ continue
+ fi
+
+ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_option in
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+ | --da=*)
+ datadir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ eval "enable_$ac_feature=no" ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "enable_$ac_feature='$ac_optarg'" ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst \
+ | --locals | --local | --loca | --loc | --lo)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "with_$ac_package='$ac_optarg'" ;;
+
+ -without-* | --without-*)
+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/-/_/g'`
+ eval "with_$ac_package=no" ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
+ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+ eval "$ac_envvar='$ac_optarg'"
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ { echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+ localstatedir libdir includedir oldincludedir infodir mandir
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then its parent.
+ ac_confdir=`(dirname "$0") 2>/dev/null ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$0" : 'X\(//\)[^/]' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$0" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r $srcdir/$ac_unique_file; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+ { (exit 1); exit 1; }; }
+ else
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
+ fi
+fi
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+ { (exit 1); exit 1; }; }
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CXX_set=${CXX+set}
+ac_env_CXX_value=$CXX
+ac_cv_env_CXX_set=${CXX+set}
+ac_cv_env_CXX_value=$CXX
+ac_env_CXXFLAGS_set=${CXXFLAGS+set}
+ac_env_CXXFLAGS_value=$CXXFLAGS
+ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set}
+ac_cv_env_CXXFLAGS_value=$CXXFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+ac_env_CC_set=${CC+set}
+ac_env_CC_value=$CC
+ac_cv_env_CC_set=${CC+set}
+ac_cv_env_CC_value=$CC
+ac_env_CFLAGS_set=${CFLAGS+set}
+ac_env_CFLAGS_value=$CFLAGS
+ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_SPAMC_set=${SPAMC+set}
+ac_env_SPAMC_value=$SPAMC
+ac_cv_env_SPAMC_set=${SPAMC+set}
+ac_cv_env_SPAMC_value=$SPAMC
+ac_env_SENDMAIL_set=${SENDMAIL+set}
+ac_env_SENDMAIL_value=$SENDMAIL
+ac_cv_env_SENDMAIL_set=${SENDMAIL+set}
+ac_cv_env_SENDMAIL_value=$SENDMAIL
+ac_env_CXXCPP_set=${CXXCPP+set}
+ac_env_CXXCPP_value=$CXXCPP
+ac_cv_env_CXXCPP_set=${CXXCPP+set}
+ac_cv_env_CXXCPP_value=$CXXCPP
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures spamass-milter 0.3.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+_ACEOF
+
+ cat <<_ACEOF
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data [PREFIX/share]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --infodir=DIR info documentation [PREFIX/info]
+ --mandir=DIR man documentation [PREFIX/man]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of spamass-milter 0.3.0:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors
+ --enable-emulate-poll use a select wrapper instead of poll (autodetected)
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-dmalloc use dmalloc ( http://www.dmalloc.com )
+
+Some influential environment variables:
+ CXX C++ compiler command
+ CXXFLAGS C++ compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
+ headers in a nonstandard directory <include dir>
+ CC C compiler command
+ CFLAGS C compiler flags
+ SPAMC Path to spamc
+ SENDMAIL Path to sendmail
+ CXXCPP C++ preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+_ACEOF
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ ac_popdir=`pwd`
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d $ac_dir || continue
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+ cd $ac_dir
+ # Check for guested configure; otherwise get Cygnus style configure.
+ if test -f $ac_srcdir/configure.gnu; then
+ echo
+ $SHELL $ac_srcdir/configure.gnu --help=recursive
+ elif test -f $ac_srcdir/configure; then
+ echo
+ $SHELL $ac_srcdir/configure --help=recursive
+ elif test -f $ac_srcdir/configure.ac ||
+ test -f $ac_srcdir/configure.in; then
+ echo
+ $ac_configure --help
+ else
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi
+ cd $ac_popdir
+ done
+fi
+
+test -n "$ac_init_help" && exit 0
+if $ac_init_version; then
+ cat <<\_ACEOF
+spamass-milter configure 0.3.0
+generated by GNU Autoconf 2.59
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit 0
+fi
+exec 5>config.log
+cat >&5 <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by spamass-milter $as_me 0.3.0, which was
+generated by GNU Autoconf 2.59. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ echo "PATH: $as_dir"
+done
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_sep=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 2)
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+ # Get rid of the leading space.
+ ac_sep=" "
+ ;;
+ esac
+ done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+{
+ (set) 2>&1 |
+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ sed -n \
+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+ ;;
+ *)
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+}
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ sed "/^$/d" confdefs.h | sort
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ echo "$as_me: caught signal $ac_signal"
+ echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core &&
+ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+ ' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+ if test -r "$ac_site_file"; then
+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . $cache_file;;
+ *) . ./$cache_file;;
+ esac
+ fi
+else
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+ eval ac_new_val="\$ac_env_${ac_var}_value"
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+echo "$as_me: former value: $ac_old_val" >&2;}
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+echo "$as_me: current value: $ac_new_val" >&2;}
+ ac_cache_corrupted=:
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Initialize automake now
+ ac_config_headers="$ac_config_headers config.h"
+
+am__api_version="1.9"
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+ ./ | .// | /cC/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+done
+
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL=$ac_install_sh
+ fi
+fi
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,$program_prefix,;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+# Double any \ or $. echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm conftest.sed
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ # We used to keeping the `.' as first argument, in order to
+ # allow $(mkdir_p) to be used without argument. As in
+ # $(mkdir_p) $(somedir)
+ # where $(somedir) is conditionally defined. However this is wrong
+ # for two reasons:
+ # 1. if the package is installed by a user who cannot write `.'
+ # make install will fail,
+ # 2. the above comment should most certainly read
+ # $(mkdir_p) $(DESTDIR)$(somedir)
+ # so it does not work when $(somedir) is undefined and
+ # $(DESTDIR) is not.
+ # To support the latter case, we have to write
+ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+ # so the `.' trick is pointless.
+ mkdir_p='mkdir -p --'
+else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ for d in ./-p ./--version;
+ do
+ test -d $d && rmdir $d
+ done
+ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+ if test -f "$ac_aux_dir/mkinstalldirs"; then
+ mkdir_p='$(mkinstalldirs)'
+ else
+ mkdir_p='$(install_sh) -d'
+ fi
+fi
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AWK+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$AWK" && break
+done
+
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.make <<\_ACEOF
+all:
+ @echo 'ac_maketemp="$(MAKE)"'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftest.make
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ SET_MAKE=
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE=spamass-milter
+ VERSION=0.3.0
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ STRIP=$ac_ct_STRIP
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+# Checks for programs.
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CXX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+ echo "$as_me:$LINENO: result: $CXX" >&5
+echo "${ECHO_T}$CXX" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$CXX" && break
+ done
+fi
+if test -z "$CXX"; then
+ ac_ct_CXX=$CXX
+ for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CXX"; then
+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CXX="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
+echo "${ECHO_T}$ac_ct_CXX" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$ac_ct_CXX" && break
+done
+test -n "$ac_ct_CXX" || ac_ct_CXX="g++"
+
+ CXX=$ac_ct_CXX
+fi
+
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+ "checking for C++ compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+ (eval $ac_compiler --version </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+ (eval $ac_compiler -v </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+ (eval $ac_compiler -V </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+echo "$as_me:$LINENO: checking for C++ compiler default output file name" >&5
+echo $ECHO_N "checking for C++ compiler default output file name... $ECHO_C" >&6
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+ (eval $ac_link_default) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Find the output, starting from the most likely. This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+
+# Be careful to initialize this variable, since it used to be cached.
+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ac_cv_exeext=
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+ ;;
+ conftest.$ac_ext )
+ # This is the source file.
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ # FIXME: I believe we export ac_cv_exeext for Libtool,
+ # but it would be cool to find out if it's true. Does anybody
+ # maintain Libtool? --akim.
+ export ac_cv_exeext
+ break;;
+ * )
+ break;;
+ esac
+done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C++ compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C++ compiler cannot create executables
+See \`config.log' for more details." >&2;}
+ { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
+
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether the C++ compiler works" >&5
+echo $ECHO_N "checking whether the C++ compiler works... $ECHO_C" >&6
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+ if { ac_try='./$ac_file'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { echo "$as_me:$LINENO: error: cannot run C++ compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C++ compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ fi
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
+
+echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ export ac_cv_exeext
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+if test "${ac_cv_objext+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6
+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6
+GXX=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+CXXFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
+echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cxx_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cxx_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_cxx_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
+ else
+ CXXFLAGS="-g"
+ fi
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+for ac_declaration in \
+ '' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+ 'extern "C" void exit (int);' \
+ 'void exit (int);'
+do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+ echo '#ifdef __cplusplus' >>confdefs.h
+ echo $ac_declaration >>confdefs.h
+ echo '#endif' >>confdefs.h
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+
+
+echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then
+ enableval="$enable_dependency_tracking"
+
+fi;
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+
+
+if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+
+
+depcc="$CXX" am_compiler_list=
+
+echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CXX_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CXX_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+
+
+if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+ am__fastdepCXX_TRUE=
+ am__fastdepCXX_FALSE='#'
+else
+ am__fastdepCXX_TRUE='#'
+ am__fastdepCXX_FALSE=
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$ac_ct_CC" && break
+done
+
+ CC=$ac_ct_CC
+fi
+
+fi
+
+
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+ "checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+ (eval $ac_compiler --version </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+ (eval $ac_compiler -v </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+ (eval $ac_compiler -V </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+CFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_cc_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std1 is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std1. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX -qlanglvl=ansi
+# Ultrix and OSF/1 -std1
+# HP-UX 10.20 and later -Ae
+# HP-UX older versions -Aa -D_HPUX_SOURCE
+# SVR4 -Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
+
+fi
+
+case "x$ac_cv_prog_cc_stdc" in
+ x|xno)
+ echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+ *)
+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+ CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
+# Some people use a C++ compiler to compile C. Since we use `exit',
+# in C++ we need to declare it. In case someone uses the same compiler
+# for both compiling C and C++ we need to have the C++ compiler decide
+# the declaration of exit, since it's the most demanding environment.
+cat >conftest.$ac_ext <<_ACEOF
+#ifndef __cplusplus
+ choke me
+#endif
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ for ac_declaration in \
+ '' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+ 'extern "C" void exit (int);' \
+ 'void exit (int);'
+do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+ echo '#ifdef __cplusplus' >>confdefs.h
+ echo $ac_declaration >>confdefs.h
+ echo '#endif' >>confdefs.h
+fi
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CC" am_compiler_list=
+
+echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+
+
+if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+
+ ansi=
+ if test -z "$ansi"; then
+ msg="for C compiler warning flags"
+ else
+ msg="for C compiler warning and ANSI conformance flags"
+ fi
+ echo "$as_me:$LINENO: checking $msg" >&5
+echo $ECHO_N "checking $msg... $ECHO_C" >&6
+if test "${vl_cv_prog_cc_warnings+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ if test -n "$CC"; then
+ cat > conftest.c <<EOF
+int main(int argc, char **argv) { return 0; }
+EOF
+
+ if test "$GCC" = "yes"; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="-Wall"
+ else
+ vl_cv_prog_cc_warnings="-Wall -ansi -pedantic"
+ fi
+
+
+ elif $CC -V 2>&1 | grep -i "WorkShop" > /dev/null 2>&1 &&
+ $CC -c -v -Xc conftest.c > /dev/null 2>&1 &&
+ test -f conftest.o; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="-v"
+ else
+ vl_cv_prog_cc_warnings="-v -Xc"
+ fi
+
+ elif $CC -V 2>&1 | grep -i "Digital UNIX Compiler" > /dev/null 2>&1 &&
+ $CC -c -verbose -w0 -warnprotos -std1 conftest.c > /dev/null 2>&1 &&
+ test -f conftest.o; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="-verbose -w0 -warnprotos"
+ else
+ vl_cv_prog_cc_warnings="-verbose -w0 -warnprotos -std1"
+ fi
+
+ elif $CC 2>&1 | grep -i "C for AIX Compiler" > /dev/null 2>&1 &&
+ $CC -c -qlanglvl=ansi -qinfo=all conftest.c > /dev/null 2>&1 &&
+ test -f conftest.o; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="-qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd"
+ else
+ vl_cv_prog_cc_warnings="-qsrcmsg -qinfo=all:noppt:noppc:noobs:nocnd -qlanglvl=ansi"
+ fi
+
+ elif $CC -version 2>&1 | grep -i "MIPSpro Compilers" > /dev/null 2>&1 &&
+ $CC -c -fullwarn -ansi -ansiE conftest.c > /dev/null 2>&1 &&
+ test -f conftest.o; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="-fullwarn"
+ else
+ vl_cv_prog_cc_warnings="-fullwarn -ansi -ansiE"
+ fi
+
+ elif what $CC 2>&1 | grep -i "HP C Compiler" > /dev/null 2>&1 &&
+ $CC -c -Aa +w1 conftest.c > /dev/null 2>&1 &&
+ test -f conftest.o; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="+w1"
+ else
+ vl_cv_prog_cc_warnings="+w1 -Aa"
+ fi
+
+ elif $CC -V 2>&1 | grep "/SX" > /dev/null 2>&1 &&
+ $CC -c -pvctl,fullmsg -Xc conftest.c > /dev/null 2>&1 &&
+ test -f conftest.o; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="-pvctl,fullmsg"
+ else
+ vl_cv_prog_cc_warnings="-pvctl,fullmsg -Xc"
+ fi
+
+ elif $CC -V 2>&1 | grep -i "Cray" > /dev/null 2>&1 &&
+ $CC -c -h msglevel 2 conftest.c > /dev/null 2>&1 &&
+ test -f conftest.o; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="-h msglevel 2"
+ else
+ vl_cv_prog_cc_warnings="-h msglevel 2 -h conform"
+ fi
+
+ elif $CC -V 2>&1 | grep -i "Intel(R) C++ Compiler" > /dev/null 2>&1 &&
+ $CC -c -Wall -wd981,1418,193 conftest.c > /dev/null 2>&1 &&
+ test -f conftest.o; then
+ if test -z "$ansi"; then
+ vl_cv_prog_cc_warnings="-Wall -wd981,1418,193"
+ else
+ vl_cv_prog_cc_warnings="-Wall -wd981,1418,193 -Xc"
+ fi
+
+ fi
+ rm -f conftest.*
+ fi
+ if test -n "$vl_cv_prog_cc_warnings"; then
+ VL_WARN_CFLAGS="$vl_cv_prog_cc_warnings"
+ else
+ vl_cv_prog_cc_warnings="unknown"
+ fi
+
+fi
+echo "$as_me:$LINENO: result: $vl_cv_prog_cc_warnings" >&5
+echo "${ECHO_T}$vl_cv_prog_cc_warnings" >&6
+
+CFLAGS="$CFLAGS $VL_WARN_CFLAGS"
+CXXFLAGS="$CXXFLAGS $VL_WARN_CFLAGS"
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+# Enable useable exception handler if it exists.
+
+echo "$as_me:$LINENO: checking whether the compiler supports exceptions" >&5
+echo $ECHO_N "checking whether the compiler supports exceptions... $ECHO_C" >&6
+if test "${ac_cv_cxx_exceptions+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+
+ ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+try { throw 1; } catch (int i) { return i; }
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_cxx_exceptions=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_cxx_exceptions=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_cxx_exceptions" >&5
+echo "${ECHO_T}$ac_cv_cxx_exceptions" >&6
+if test "$ac_cv_cxx_exceptions" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_EXCEPTIONS
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking whether the compiler implements namespaces" >&5
+echo $ECHO_N "checking whether the compiler implements namespaces... $ECHO_C" >&6
+if test "${ac_cv_cxx_namespaces+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+
+ ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+namespace Outer { namespace Inner { int i = 0; }}
+int
+main ()
+{
+using namespace Outer::Inner; return i;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_cxx_namespaces=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_cxx_namespaces=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_cxx_namespaces" >&5
+echo "${ECHO_T}$ac_cv_cxx_namespaces" >&6
+if test "$ac_cv_cxx_namespaces" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_NAMESPACES
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking whether the compiler has __gnu_cxx::__verbose_terminate_handler" >&5
+echo $ECHO_N "checking whether the compiler has __gnu_cxx::__verbose_terminate_handler... $ECHO_C" >&6
+if test "${ac_cv_verbose_terminate_handler+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+
+
+
+
+ ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <exception>
+int
+main ()
+{
+std::set_terminate(__gnu_cxx::__verbose_terminate_handler);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_verbose_terminate_handler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_verbose_terminate_handler=no
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_verbose_terminate_handler" >&5
+echo "${ECHO_T}$ac_cv_verbose_terminate_handler" >&6
+if test "$ac_cv_verbose_terminate_handler" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_VERBOSE_TERMINATE_HANDLER
+_ACEOF
+
+fi
+
+
+# Try and disable all inlining; gdb shows the inlined function in a
+# stack trace and you lose the caller's frame. Bad for debugging.
+
+ echo "$as_me:$LINENO: checking for -fno-default-inline" >&5
+echo $ECHO_N "checking for -fno-default-inline... $ECHO_C" >&6
+ if test "${pike_cv_option_fno_default_inline+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ OLD_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$OLD_CPPFLAGS -fno-default-inline"
+ old_ac_link="$ac_link"
+ ac_link="$old_ac_link 2>conftezt.out.2"
+ if test "$cross_compiling" = yes; then
+
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ pike_cv_option_fno_default_inline=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+pike_cv_option_fno_default_inline=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+ int foo;
+ int main(int argc, char **argv)
+ {
+ /* The following code triggs gcc:s generation of aline opcodes,
+ * which some versions of as does not support.
+ */
+ if (argc > 0) argc = 0;
+ return argc;
+ }
+
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ pike_cv_option_fno_default_inline=yes
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+pike_cv_option_fno_default_inline=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+ if grep -i 'unrecognized option' <conftezt.out.2 >/dev/null; then
+ pike_cv_option_fno_default_inline=no
+ elif grep -i 'unknown option' <conftezt.out.2 >/dev/null; then
+ # cc/HPUX says the following regarding -q64:
+ #
+ # cc: warning 422: Unknown option "6" ignored.
+ # cc: warning 422: Unknown option "4" ignored.
+ pike_cv_option_fno_default_inline=no
+ elif grep -i 'optimizer bugs' <conftezt.out.2 >/dev/null; then
+ # gcc/FreeBSD-4.6/alpha says the following regarding -O2:
+ #
+ # cc1: warning:
+ # ***
+ # *** The -O2 flag TRIGGERS KNOWN OPTIMIZER BUGS ON THIS PLATFORM
+ # ***
+ pike_cv_option_fno_default_inline=no
+ elif grep -i 'not found' <conftezt.out.2 >/dev/null; then
+ # cc/AIX says the following regarding +O3:
+ #
+ # cc: 1501-228 input file +O3 not found
+ pike_cv_option_fno_default_inline=no
+ elif grep -i 'ignored' <conftezt.out.2 >/dev/null; then
+ # gcc/AIX says the following regarding -fpic:
+ #
+ # cc1: warning: -fpic ignored (all code is position independent)
+ pike_cv_option_fno_default_inline=no
+ else :; fi
+ rm conftezt.out.2
+ CPPFLAGS="$OLD_CPPFLAGS"
+ ac_link="$old_ac_link"
+
+fi
+
+
+ if test x"$pike_cv_option_fno_default_inline" = "xyes" ; then
+ CXXFLAGS="$CXXFLAGS -fno-default-inline"
+ case "CXXFLAGS" in
+ OPTIMIZE)
+ CFLAGS="$CFLAGS -fno-default-inline"
+ ;;
+ esac
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+
+ fi
+
+
+ echo "$as_me:$LINENO: checking for -fno-inline" >&5
+echo $ECHO_N "checking for -fno-inline... $ECHO_C" >&6
+ if test "${pike_cv_option_fno_inline+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ OLD_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$OLD_CPPFLAGS -fno-inline"
+ old_ac_link="$ac_link"
+ ac_link="$old_ac_link 2>conftezt.out.2"
+ if test "$cross_compiling" = yes; then
+
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ pike_cv_option_fno_inline=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+pike_cv_option_fno_inline=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+ int foo;
+ int main(int argc, char **argv)
+ {
+ /* The following code triggs gcc:s generation of aline opcodes,
+ * which some versions of as does not support.
+ */
+ if (argc > 0) argc = 0;
+ return argc;
+ }
+
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ pike_cv_option_fno_inline=yes
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+pike_cv_option_fno_inline=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+ if grep -i 'unrecognized option' <conftezt.out.2 >/dev/null; then
+ pike_cv_option_fno_inline=no
+ elif grep -i 'unknown option' <conftezt.out.2 >/dev/null; then
+ # cc/HPUX says the following regarding -q64:
+ #
+ # cc: warning 422: Unknown option "6" ignored.
+ # cc: warning 422: Unknown option "4" ignored.
+ pike_cv_option_fno_inline=no
+ elif grep -i 'optimizer bugs' <conftezt.out.2 >/dev/null; then
+ # gcc/FreeBSD-4.6/alpha says the following regarding -O2:
+ #
+ # cc1: warning:
+ # ***
+ # *** The -O2 flag TRIGGERS KNOWN OPTIMIZER BUGS ON THIS PLATFORM
+ # ***
+ pike_cv_option_fno_inline=no
+ elif grep -i 'not found' <conftezt.out.2 >/dev/null; then
+ # cc/AIX says the following regarding +O3:
+ #
+ # cc: 1501-228 input file +O3 not found
+ pike_cv_option_fno_inline=no
+ elif grep -i 'ignored' <conftezt.out.2 >/dev/null; then
+ # gcc/AIX says the following regarding -fpic:
+ #
+ # cc1: warning: -fpic ignored (all code is position independent)
+ pike_cv_option_fno_inline=no
+ else :; fi
+ rm conftezt.out.2
+ CPPFLAGS="$OLD_CPPFLAGS"
+ ac_link="$old_ac_link"
+
+fi
+
+
+ if test x"$pike_cv_option_fno_inline" = "xyes" ; then
+ CXXFLAGS="$CXXFLAGS -fno-inline"
+ case "CXXFLAGS" in
+ OPTIMIZE)
+ CFLAGS="$CFLAGS -fno-inline"
+ ;;
+ esac
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+
+ fi
+
+
+#PIKE_INCLUDE_PATHS
+#PIKE_LIBRARY_PATHS
+
+# Search for spamc
+# Extract the first word of "spamc", so it can be a program name with args.
+set dummy spamc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_SPAMC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $SPAMC in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_SPAMC="$SPAMC" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_SPAMC="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ ;;
+esac
+fi
+SPAMC=$ac_cv_path_SPAMC
+
+if test -n "$SPAMC"; then
+ echo "$as_me:$LINENO: result: $SPAMC" >&5
+echo "${ECHO_T}$SPAMC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+if test "x$SPAMC" = x ; then
+ { { echo "$as_me:$LINENO: error: Spamc not found. Is SpamAssassin installed?" >&5
+echo "$as_me: error: Spamc not found. Is SpamAssassin installed?" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+
+cat >>confdefs.h <<_ACEOF
+#define SPAMC "$SPAMC"
+_ACEOF
+
+
+# Search for sendmail
+# Extract the first word of "sendmail", so it can be a program name with args.
+set dummy sendmail; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_SENDMAIL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $SENDMAIL in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_SENDMAIL="$SENDMAIL" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_dummy="$PATH:/usr/lib"
+for as_dir in $as_dummy
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_SENDMAIL="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ ;;
+esac
+fi
+SENDMAIL=$ac_cv_path_SENDMAIL
+
+if test -n "$SENDMAIL"; then
+ echo "$as_me:$LINENO: result: $SENDMAIL" >&5
+echo "${ECHO_T}$SENDMAIL" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+if test "x$SENDMAIL" = x ; then
+ { { echo "$as_me:$LINENO: error: Sendmail not found. Check your $PATH variable" >&5
+echo "$as_me: error: Sendmail not found. Check your $PATH variable" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+
+cat >>confdefs.h <<_ACEOF
+#define SENDMAIL "$SENDMAIL"
+_ACEOF
+
+
+# Check nroff and the options it supports
+for ac_prog in nroff
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_NROFF+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$NROFF"; then
+ ac_cv_prog_NROFF="$NROFF" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NROFF="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+NROFF=$ac_cv_prog_NROFF
+if test -n "$NROFF"; then
+ echo "$as_me:$LINENO: result: $NROFF" >&5
+echo "${ECHO_T}$NROFF" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$NROFF" && break
+done
+
+
+MDOC=no
+if test "x$NROFF" != x; then
+ echo "$as_me:$LINENO: checking for mdoc nroff macros" >&5
+echo $ECHO_N "checking for mdoc nroff macros... $ECHO_C" >&6
+ if test "${ac_cv_mdoc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ nroff -mdoc < /dev/null > /dev/null 2>&1
+ if test $? = 0; then
+ ac_cv_mdoc=yes
+ else
+ ac_cv_mdoc=no
+ fi
+
+fi
+
+ MDOC=$ac_cv_mdoc
+ echo "$as_me:$LINENO: result: $MDOC" >&5
+echo "${ECHO_T}$MDOC" >&6
+fi
+
+
+
+if test $MDOC = yes; then
+ HAVE_MDOC_TRUE=
+ HAVE_MDOC_FALSE='#'
+else
+ HAVE_MDOC_TRUE='#'
+ HAVE_MDOC_FALSE=
+fi
+
+
+# Search for pthreads, and make them the default (have to do it here else
+# the -lmilter check will fail to link)
+# Make sure we can run config.sub.
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+ { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+ { (exit 1); exit 1; }; }
+
+echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
+if test "${ac_cv_build+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+ ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+ { (exit 1); exit 1; }; }
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
+build=$ac_cv_build
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
+if test "${ac_cv_host+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+ ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
+host=$ac_cv_host
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+
+
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+acx_pthread_ok=no
+
+# We used to check for pthread.h first, but this fails if pthread.h
+# requires special compiler flags (e.g. on True64 or Sequent).
+# It gets checked for in the link test anyway.
+
+# First of all, check if the user has set any of the PTHREAD_LIBS,
+# etcetera environment variables, and if threads linking works using
+# them:
+if test x"$PTHREAD_LIBS$PTHREAD_CFLAGS" != x; then
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ save_LIBS="$LIBS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ echo "$as_me:$LINENO: checking for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS" >&5
+echo $ECHO_N "checking for pthread_join in LIBS=$PTHREAD_LIBS with CFLAGS=$PTHREAD_CFLAGS... $ECHO_C" >&6
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char pthread_join ();
+int
+main ()
+{
+pthread_join ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ acx_pthread_ok=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ echo "$as_me:$LINENO: result: $acx_pthread_ok" >&5
+echo "${ECHO_T}$acx_pthread_ok" >&6
+ if test x"$acx_pthread_ok" = xno; then
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+ fi
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+fi
+
+# We must check for the threads library under a number of different
+# names; the ordering is very important because some systems
+# (e.g. DEC) have both -lpthread and -lpthreads, where one of the
+# libraries is broken (non-POSIX).
+
+# Create a list of thread flags to try. Items starting with a "-" are
+# C compiler flags, and other items are library names, except for "none"
+# which indicates that we try without any flags at all, and "pthread-config"
+# which is a program returning the flags for the Pth emulation library.
+
+acx_pthread_flags="pthreads none -Kthread -kthread lthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config"
+
+# The ordering *is* (sometimes) important. Some notes on the
+# individual items follow:
+
+# pthreads: AIX (must check this before -lpthread)
+# none: in case threads are in libc; should be tried before -Kthread and
+# other compiler flags to prevent continual compiler warnings
+# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h)
+# -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able)
+# lthread: LinuxThreads port on FreeBSD (also preferred to -pthread)
+# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads)
+# -pthreads: Solaris/gcc
+# -mthreads: Mingw32/gcc, Lynx/gcc
+# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it
+# doesn't hurt to check since this sometimes defines pthreads too;
+# also defines -D_REENTRANT)
+# pthread: Linux, etcetera
+# --thread-safe: KAI C++
+# pthread-config: use pthread-config program (for GNU Pth library)
+
+case "${host_cpu}-${host_os}" in
+ *solaris*)
+
+ # On Solaris (at least, for some versions), libc contains stubbed
+ # (non-functional) versions of the pthreads routines, so link-based
+ # tests will erroneously succeed. (We need to link with -pthread or
+ # -lpthread.) (The stubs are missing pthread_cleanup_push, or rather
+ # a function called by this macro, so we could check for that, but
+ # who knows whether they'll stub that too in a future libc.) So,
+ # we'll just look for -pthreads and -lpthread first:
+
+ acx_pthread_flags="-pthread -pthreads pthread -mt $acx_pthread_flags"
+ ;;
+esac
+
+if test x"$acx_pthread_ok" = xno; then
+for flag in $acx_pthread_flags; do
+
+ case $flag in
+ none)
+ echo "$as_me:$LINENO: checking whether pthreads work without any flags" >&5
+echo $ECHO_N "checking whether pthreads work without any flags... $ECHO_C" >&6
+ ;;
+
+ -*)
+ echo "$as_me:$LINENO: checking whether pthreads work with $flag" >&5
+echo $ECHO_N "checking whether pthreads work with $flag... $ECHO_C" >&6
+ PTHREAD_CFLAGS="$flag"
+ ;;
+
+ pthread-config)
+ # Extract the first word of "pthread-config", so it can be a program name with args.
+set dummy pthread-config; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_acx_pthread_config+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$acx_pthread_config"; then
+ ac_cv_prog_acx_pthread_config="$acx_pthread_config" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_acx_pthread_config="yes"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_acx_pthread_config" && ac_cv_prog_acx_pthread_config="no"
+fi
+fi
+acx_pthread_config=$ac_cv_prog_acx_pthread_config
+if test -n "$acx_pthread_config"; then
+ echo "$as_me:$LINENO: result: $acx_pthread_config" >&5
+echo "${ECHO_T}$acx_pthread_config" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ if test x"$acx_pthread_config" = xno; then continue; fi
+ PTHREAD_CFLAGS="`pthread-config --cflags`"
+ PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`"
+ ;;
+
+ *)
+ echo "$as_me:$LINENO: checking for the pthreads library -l$flag" >&5
+echo $ECHO_N "checking for the pthreads library -l$flag... $ECHO_C" >&6
+ PTHREAD_LIBS="-l$flag"
+ ;;
+ esac
+
+ save_LIBS="$LIBS"
+ save_CFLAGS="$CFLAGS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+
+ # Check for various functions. We must include pthread.h,
+ # since some functions may be macros. (On the Sequent, we
+ # need a special flag -Kthread to make this header compile.)
+ # We check for pthread_join because it is in -lpthread on IRIX
+ # while pthread_create is in libc. We check for pthread_attr_init
+ # due to DEC craziness with -lpthreads. We check for
+ # pthread_cleanup_push because it is one of the few pthread
+ # functions on Solaris that doesn't have a non-functional libc stub.
+ # We try pthread_create on general principles.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <pthread.h>
+int
+main ()
+{
+pthread_t th; pthread_join(th, 0);
+ pthread_attr_init(0); pthread_cleanup_push(0, 0);
+ pthread_create(0,0,0,0); pthread_cleanup_pop(0);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ acx_pthread_ok=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+
+ echo "$as_me:$LINENO: result: $acx_pthread_ok" >&5
+echo "${ECHO_T}$acx_pthread_ok" >&6
+ if test "x$acx_pthread_ok" = xyes; then
+ break;
+ fi
+
+ PTHREAD_LIBS=""
+ PTHREAD_CFLAGS=""
+done
+fi
+
+# Various other checks:
+if test "x$acx_pthread_ok" = xyes; then
+ save_LIBS="$LIBS"
+ LIBS="$PTHREAD_LIBS $LIBS"
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+
+ # Detect AIX lossage: threads are created detached by default
+ # and the JOINABLE attribute has a nonstandard name (UNDETACHED).
+ echo "$as_me:$LINENO: checking for joinable pthread attribute" >&5
+echo $ECHO_N "checking for joinable pthread attribute... $ECHO_C" >&6
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <pthread.h>
+int
+main ()
+{
+int attr=PTHREAD_CREATE_JOINABLE;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ok=PTHREAD_CREATE_JOINABLE
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ok=unknown
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test x"$ok" = xunknown; then
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <pthread.h>
+int
+main ()
+{
+int attr=PTHREAD_CREATE_UNDETACHED;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ok=PTHREAD_CREATE_UNDETACHED
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ok=unknown
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ fi
+ if test x"$ok" != xPTHREAD_CREATE_JOINABLE; then
+
+cat >>confdefs.h <<\_ACEOF
+#define PTHREAD_CREATE_JOINABLE $ok
+_ACEOF
+
+ fi
+ echo "$as_me:$LINENO: result: ${ok}" >&5
+echo "${ECHO_T}${ok}" >&6
+ if test x"$ok" = xunknown; then
+ { echo "$as_me:$LINENO: WARNING: we do not know how to create joinable pthreads" >&5
+echo "$as_me: WARNING: we do not know how to create joinable pthreads" >&2;}
+ fi
+
+ echo "$as_me:$LINENO: checking if more special flags are required for pthreads" >&5
+echo $ECHO_N "checking if more special flags are required for pthreads... $ECHO_C" >&6
+ flag=no
+ case "${host_cpu}-${host_os}" in
+ *-aix* | *-freebsd* | *-darwin*) flag="-D_THREAD_SAFE";;
+ *solaris* | *-osf* | *-hpux*) flag="-D_REENTRANT";;
+ esac
+ echo "$as_me:$LINENO: result: ${flag}" >&5
+echo "${ECHO_T}${flag}" >&6
+ if test "x$flag" != xno; then
+ PTHREAD_CFLAGS="$flag $PTHREAD_CFLAGS"
+ fi
+
+ LIBS="$save_LIBS"
+ CFLAGS="$save_CFLAGS"
+
+ # More AIX lossage: must compile with cc_r
+ # Extract the first word of "cc_r", so it can be a program name with args.
+set dummy cc_r; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_PTHREAD_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$PTHREAD_CC"; then
+ ac_cv_prog_PTHREAD_CC="$PTHREAD_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_PTHREAD_CC="cc_r"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_PTHREAD_CC" && ac_cv_prog_PTHREAD_CC="${CC}"
+fi
+fi
+PTHREAD_CC=$ac_cv_prog_PTHREAD_CC
+if test -n "$PTHREAD_CC"; then
+ echo "$as_me:$LINENO: result: $PTHREAD_CC" >&5
+echo "${ECHO_T}$PTHREAD_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+else
+ PTHREAD_CC="$CC"
+fi
+
+
+
+
+
+# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND:
+if test x"$acx_pthread_ok" = xyes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_PTHREAD 1
+_ACEOF
+
+ :
+else
+ acx_pthread_ok=no
+ { { echo "$as_me:$LINENO: error: Cannot determine how to use pthreads" >&5
+echo "$as_me: error: Cannot determine how to use pthreads" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
+LIBS="$LIBS $PTHREAD_LIBS"
+
+# Checks for header files.
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
+echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6
+if test -z "$CXXCPP"; then
+ if test "${ac_cv_prog_CXXCPP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Double quotes because CXXCPP needs to be expanded
+ for CXXCPP in "$CXX -E" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ break
+fi
+
+ done
+ ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+ CXXCPP=$ac_cv_prog_CXXCPP
+else
+ ac_cv_prog_CXXCPP=$CXXCPP
+fi
+echo "$as_me:$LINENO: result: $CXXCPP" >&5
+echo "${ECHO_T}$CXXCPP" >&6
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+ then ac_cv_prog_egrep='grep -E'
+ else ac_cv_prog_egrep='egrep'
+ fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_stdc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then
+ :
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ exit(2);
+ exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo $ECHO_N "checking for sys/wait.h that is POSIX.1 compatible... $ECHO_C" >&6
+if test "${ac_cv_header_sys_wait_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/wait.h>
+#ifndef WEXITSTATUS
+# define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8)
+#endif
+#ifndef WIFEXITED
+# define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
+#endif
+
+int
+main ()
+{
+ int s;
+ wait (&s);
+ s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_sys_wait_h=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_sys_wait_h=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5
+echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6
+if test $ac_cv_header_sys_wait_h = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_SYS_WAIT_H 1
+_ACEOF
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+
+
+
+
+
+
+
+
+
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_Header=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_Header=no"
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+
+for ac_header in fcntl.h syslog.h sys/cdefs.h sys/select.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ----------------------------------------- ##
+## Report this to the spamass-milter lists. ##
+## ----------------------------------------- ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+# Checks for typedefs, structures, and compiler characteristics.
+echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
+echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
+if test "${ac_cv_c_const+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+/* FIXME: Include the comments suggested by Paul. */
+#ifndef __cplusplus
+ /* Ultrix mips cc rejects this. */
+ typedef int charset[2];
+ const charset x;
+ /* SunOS 4.1.1 cc rejects this. */
+ char const *const *ccp;
+ char **p;
+ /* NEC SVR4.0.2 mips cc rejects this. */
+ struct point {int x, y;};
+ static struct point const zero = {0,0};
+ /* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in
+ an arm of an if-expression whose if-part is not a constant
+ expression */
+ const char *g = "string";
+ ccp = &g + (g ? g-g : 0);
+ /* HPUX 7.0 cc rejects these. */
+ ++ccp;
+ p = (char**) ccp;
+ ccp = (char const *const *) p;
+ { /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+ }
+ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+ }
+ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+ }
+ { /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+ }
+ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+ }
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_c_const=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_c_const=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
+echo "${ECHO_T}$ac_cv_c_const" >&6
+if test $ac_cv_c_const = no; then
+
+cat >>confdefs.h <<\_ACEOF
+#define const
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking for pid_t" >&5
+echo $ECHO_N "checking for pid_t... $ECHO_C" >&6
+if test "${ac_cv_type_pid_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((pid_t *) 0)
+ return 0;
+if (sizeof (pid_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_pid_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_pid_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5
+echo "${ECHO_T}$ac_cv_type_pid_t" >&6
+if test $ac_cv_type_pid_t = yes; then
+ :
+else
+
+cat >>confdefs.h <<_ACEOF
+#define pid_t int
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking for size_t" >&5
+echo $ECHO_N "checking for size_t... $ECHO_C" >&6
+if test "${ac_cv_type_size_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((size_t *) 0)
+ return 0;
+if (sizeof (size_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_size_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_size_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
+echo "${ECHO_T}$ac_cv_type_size_t" >&6
+if test $ac_cv_type_size_t = yes; then
+ :
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned
+_ACEOF
+
+fi
+
+
+
+echo "$as_me:$LINENO: checking if we must define _GNU_SOURCE" >&5
+echo $ECHO_N "checking if we must define _GNU_SOURCE... $ECHO_C" >&6
+if test "${cf_cv_gnu_source+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+int
+main ()
+{
+
+#ifndef _XOPEN_SOURCE
+make an error
+#endif
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cf_cv_gnu_source=no
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cf_save="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS -D_GNU_SOURCE"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+int
+main ()
+{
+
+#ifdef _XOPEN_SOURCE
+make an error
+#endif
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cf_cv_gnu_source=no
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cf_cv_gnu_source=yes
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ CPPFLAGS="$cf_save"
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+echo "$as_me:$LINENO: result: $cf_cv_gnu_source" >&5
+echo "${ECHO_T}$cf_cv_gnu_source" >&6
+test "$cf_cv_gnu_source" = yes && CPPFLAGS="$CPPFLAGS -D_GNU_SOURCE"
+
+
+# Check whether --enable-emulate-poll or --disable-emulate-poll was given.
+if test "${enable_emulate_poll+set}" = set; then
+ enableval="$enable_emulate_poll"
+
+fi;
+
+# If the system doesn't have poll.h, or if the user forced it, provide
+# our own poll function
+if test x$enable_emulate_poll != xyes ; then
+
+for ac_header in poll.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ----------------------------------------- ##
+## Report this to the spamass-milter lists. ##
+## ----------------------------------------- ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+fi
+
+if test x$enable_emulate_poll = xyes -o x$ac_cv_header_poll_h = xno ; then
+{ echo "$as_me:$LINENO: Emulating poll with select" >&5
+echo "$as_me: Emulating poll with select" >&6;}
+case $LIBOBJS in
+ "poll.$ac_objext" | \
+ *" poll.$ac_objext" | \
+ "poll.$ac_objext "* | \
+ *" poll.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS poll.$ac_objext" ;;
+esac
+
+fi
+
+echo "$as_me:$LINENO: checking if malloc debugging is wanted" >&5
+echo $ECHO_N "checking if malloc debugging is wanted... $ECHO_C" >&6
+
+# Check whether --with-dmalloc or --without-dmalloc was given.
+if test "${with_dmalloc+set}" = set; then
+ withval="$with_dmalloc"
+ if test "$withval" = yes; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+cat >>confdefs.h <<\_ACEOF
+#define WITH_DMALLOC 1
+_ACEOF
+
+
+for ac_header in dmalloc.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ----------------------------------------- ##
+## Report this to the spamass-milter lists. ##
+## ----------------------------------------- ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+echo "$as_me:$LINENO: checking for dmalloc_malloc in -ldmallocthcxx" >&5
+echo $ECHO_N "checking for dmalloc_malloc in -ldmallocthcxx... $ECHO_C" >&6
+if test "${ac_cv_lib_dmallocthcxx_dmalloc_malloc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldmallocthcxx $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dmalloc_malloc ();
+int
+main ()
+{
+dmalloc_malloc ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_dmallocthcxx_dmalloc_malloc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dmallocthcxx_dmalloc_malloc=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dmallocthcxx_dmalloc_malloc" >&5
+echo "${ECHO_T}$ac_cv_lib_dmallocthcxx_dmalloc_malloc" >&6
+if test $ac_cv_lib_dmallocthcxx_dmalloc_malloc = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBDMALLOCTHCXX 1
+_ACEOF
+
+ LIBS="-ldmallocthcxx $LIBS"
+
+else
+ { { echo "$as_me:$LINENO: error: Threaded C++ dmalloc library not found" >&5
+echo "$as_me: error: Threaded C++ dmalloc library not found" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi;
+
+
+# Checks for library functions.
+
+
+
+for ac_func in vsyslog vasprintf vsnprintf
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != $ac_func;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+
+for ac_func in asprintf snprintf
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != $ac_func;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+echo "$as_me:$LINENO: checking for library containing gethostbyname" >&5
+echo $ECHO_N "checking for library containing gethostbyname... $ECHO_C" >&6
+if test "${ac_cv_search_gethostbyname+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+ac_cv_search_gethostbyname=no
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname ();
+int
+main ()
+{
+gethostbyname ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_search_gethostbyname="none required"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test "$ac_cv_search_gethostbyname" = no; then
+ for ac_lib in nsl; do
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char gethostbyname ();
+int
+main ()
+{
+gethostbyname ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_search_gethostbyname="-l$ac_lib"
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+fi
+LIBS=$ac_func_search_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_search_gethostbyname" >&5
+echo "${ECHO_T}$ac_cv_search_gethostbyname" >&6
+if test "$ac_cv_search_gethostbyname" != no; then
+ test "$ac_cv_search_gethostbyname" = "none required" || LIBS="$ac_cv_search_gethostbyname $LIBS"
+
+fi
+
+echo "$as_me:$LINENO: checking for library containing connect" >&5
+echo $ECHO_N "checking for library containing connect... $ECHO_C" >&6
+if test "${ac_cv_search_connect+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+ac_cv_search_connect=no
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char connect ();
+int
+main ()
+{
+connect ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_search_connect="none required"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test "$ac_cv_search_connect" = no; then
+ for ac_lib in socket; do
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char connect ();
+int
+main ()
+{
+connect ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_search_connect="-l$ac_lib"
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+fi
+LIBS=$ac_func_search_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_search_connect" >&5
+echo "${ECHO_T}$ac_cv_search_connect" >&6
+if test "$ac_cv_search_connect" != no; then
+ test "$ac_cv_search_connect" = "none required" || LIBS="$ac_cv_search_connect $LIBS"
+
+fi
+
+echo "$as_me:$LINENO: checking for library containing inet_aton" >&5
+echo $ECHO_N "checking for library containing inet_aton... $ECHO_C" >&6
+if test "${ac_cv_search_inet_aton+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+ac_cv_search_inet_aton=no
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char inet_aton ();
+int
+main ()
+{
+inet_aton ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_search_inet_aton="none required"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test "$ac_cv_search_inet_aton" = no; then
+ for ac_lib in resolv; do
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char inet_aton ();
+int
+main ()
+{
+inet_aton ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_search_inet_aton="-l$ac_lib"
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+fi
+LIBS=$ac_func_search_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_search_inet_aton" >&5
+echo "${ECHO_T}$ac_cv_search_inet_aton" >&6
+if test "$ac_cv_search_inet_aton" != no; then
+ test "$ac_cv_search_inet_aton" = "none required" || LIBS="$ac_cv_search_inet_aton $LIBS"
+
+fi
+
+
+# Check for functions and verify that the system provides a prototype for them.
+# Switch to C linkage. Though the autoconf manual claims it does
+# automatically. It lies.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+for ac_func in strsep daemon
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != $ac_func;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+else
+ case $LIBOBJS in
+ "$ac_func.$ac_objext" | \
+ *" $ac_func.$ac_objext" | \
+ "$ac_func.$ac_objext "* | \
+ *" $ac_func.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS $ac_func.$ac_objext" ;;
+esac
+
+fi
+done
+
+
+echo "$as_me:$LINENO: checking whether strsep is declared" >&5
+echo $ECHO_N "checking whether strsep is declared... $ECHO_C" >&6
+if test "${ac_cv_have_decl_strsep+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+#ifndef strsep
+ char *p = (char *) strsep;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_have_decl_strsep=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_have_decl_strsep=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_have_decl_strsep" >&5
+echo "${ECHO_T}$ac_cv_have_decl_strsep" >&6
+if test $ac_cv_have_decl_strsep = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_STRSEP 1
+_ACEOF
+
+
+else
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_STRSEP 0
+_ACEOF
+
+
+fi
+echo "$as_me:$LINENO: checking whether daemon is declared" >&5
+echo $ECHO_N "checking whether daemon is declared... $ECHO_C" >&6
+if test "${ac_cv_have_decl_daemon+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+#ifndef daemon
+ char *p = (char *) daemon;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_have_decl_daemon=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_have_decl_daemon=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_have_decl_daemon" >&5
+echo "${ECHO_T}$ac_cv_have_decl_daemon" >&6
+if test $ac_cv_have_decl_daemon = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_DAEMON 1
+_ACEOF
+
+
+else
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_DAEMON 0
+_ACEOF
+
+
+fi
+
+
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+# Check for libmilter and its header files in the usual locations
+if test -d /usr/lib/libmilter ; then
+ LDFLAGS="$LDFLAGS -L/usr/lib/libmilter"
+fi
+
+echo "$as_me:$LINENO: checking for mi_stop in -lmilter" >&5
+echo $ECHO_N "checking for mi_stop in -lmilter... $ECHO_C" >&6
+if test "${ac_cv_lib_milter_mi_stop+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lmilter $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char mi_stop ();
+int
+main ()
+{
+mi_stop ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_milter_mi_stop=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_milter_mi_stop=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_milter_mi_stop" >&5
+echo "${ECHO_T}$ac_cv_lib_milter_mi_stop" >&6
+if test $ac_cv_lib_milter_mi_stop = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBMILTER 1
+_ACEOF
+
+ LIBS="-lmilter $LIBS"
+
+else
+
+ # Older sendmails require libsm for support functions
+ echo "$as_me:$LINENO: checking for library containing strlcpy" >&5
+echo $ECHO_N "checking for library containing strlcpy... $ECHO_C" >&6
+if test "${ac_cv_search_strlcpy+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+ac_cv_search_strlcpy=no
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char strlcpy ();
+int
+main ()
+{
+strlcpy ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_search_strlcpy="none required"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test "$ac_cv_search_strlcpy" = no; then
+ for ac_lib in sm smutil; do
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char strlcpy ();
+int
+main ()
+{
+strlcpy ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_search_strlcpy="-l$ac_lib"
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ done
+fi
+LIBS=$ac_func_search_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_search_strlcpy" >&5
+echo "${ECHO_T}$ac_cv_search_strlcpy" >&6
+if test "$ac_cv_search_strlcpy" != no; then
+ test "$ac_cv_search_strlcpy" = "none required" || LIBS="$ac_cv_search_strlcpy $LIBS"
+
+fi
+
+ $as_unset ac_cv_lib_milter_mi_stop
+
+echo "$as_me:$LINENO: checking for mi_stop in -lmilter" >&5
+echo $ECHO_N "checking for mi_stop in -lmilter... $ECHO_C" >&6
+if test "${ac_cv_lib_milter_mi_stop+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lmilter $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char mi_stop ();
+int
+main ()
+{
+mi_stop ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_milter_mi_stop=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_milter_mi_stop=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_milter_mi_stop" >&5
+echo "${ECHO_T}$ac_cv_lib_milter_mi_stop" >&6
+if test $ac_cv_lib_milter_mi_stop = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBMILTER 1
+_ACEOF
+
+ LIBS="-lmilter $LIBS"
+
+else
+
+ { { echo "$as_me:$LINENO: error: Cannot find libmilter" >&5
+echo "$as_me: error: Cannot find libmilter" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+
+
+fi
+
+
+for ac_header in libmilter/mfapi.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ----------------------------------------- ##
+## Report this to the spamass-milter lists. ##
+## ----------------------------------------- ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+else
+
+ { { echo "$as_me:$LINENO: error: Please install mfapi.h from the sendmail distribution" >&5
+echo "$as_me: error: Please install mfapi.h from the sendmail distribution" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+
+done
+
+
+# Files to create from .in templates:
+ ac_config_files="$ac_config_files Makefile contrib/spamass-milter.spec spamass-milter.1"
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+ (set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+} |
+ sed '
+ t clear
+ : clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+ if test -w $cache_file; then
+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ cat confcache >$cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[ ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[ ]*$//;
+}'
+fi
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_i=`echo "$ac_i" |
+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+ # 2. Add them.
+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${HAVE_MDOC_TRUE}" && test -z "${HAVE_MDOC_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"HAVE_MDOC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"HAVE_MDOC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+exec 6>&1
+
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling. Logging --version etc. is OK.
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
+This file was extended by spamass-milter $as_me 0.3.0, which was
+generated by GNU Autoconf 2.59. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+_ACEOF
+
+# Files that config.status was made for.
+if test -n "$ac_config_files"; then
+ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_headers"; then
+ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_links"; then
+ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-autoconf@gnu.org>."
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+spamass-milter config.status 0.3.0
+configured by $0, generated by GNU Autoconf 2.59,
+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=$srcdir
+INSTALL="$INSTALL"
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value. By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "x$1" : 'x\([^=]*\)='`
+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ -*)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ *) # This is not an option, so the user has probably given explicit
+ # arguments.
+ ac_option=$1
+ ac_need_defaults=false;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --vers* | -V )
+ echo "$ac_cs_version"; exit 0 ;;
+ --he | --h)
+ # Conflict between --help and --header
+ { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; };;
+ --help | --hel | -h )
+ echo "$ac_cs_usage"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+ ac_need_defaults=false;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; } ;;
+
+ *) ac_config_targets="$ac_config_targets $1" ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+#
+# INIT-COMMANDS section.
+#
+
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_config_target in $ac_config_targets
+do
+ case "$ac_config_target" in
+ # Handling of arguments.
+ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "contrib/spamass-milter.spec" ) CONFIG_FILES="$CONFIG_FILES contrib/spamass-milter.spec" ;;
+ "spamass-milter.1" ) CONFIG_FILES="$CONFIG_FILES spamass-milter.1" ;;
+ "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./confstat$$-$RANDOM
+ (umask 077 && mkdir $tmp)
+} ||
+{
+ echo "$me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+}
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "\$CONFIG_FILES"; then
+ # Protect against being on the right side of a sed subst in config.status.
+ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s,@SHELL@,$SHELL,;t t
+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s,@exec_prefix@,$exec_prefix,;t t
+s,@prefix@,$prefix,;t t
+s,@program_transform_name@,$program_transform_name,;t t
+s,@bindir@,$bindir,;t t
+s,@sbindir@,$sbindir,;t t
+s,@libexecdir@,$libexecdir,;t t
+s,@datadir@,$datadir,;t t
+s,@sysconfdir@,$sysconfdir,;t t
+s,@sharedstatedir@,$sharedstatedir,;t t
+s,@localstatedir@,$localstatedir,;t t
+s,@libdir@,$libdir,;t t
+s,@includedir@,$includedir,;t t
+s,@oldincludedir@,$oldincludedir,;t t
+s,@infodir@,$infodir,;t t
+s,@mandir@,$mandir,;t t
+s,@build_alias@,$build_alias,;t t
+s,@host_alias@,$host_alias,;t t
+s,@target_alias@,$target_alias,;t t
+s,@DEFS@,$DEFS,;t t
+s,@ECHO_C@,$ECHO_C,;t t
+s,@ECHO_N@,$ECHO_N,;t t
+s,@ECHO_T@,$ECHO_T,;t t
+s,@LIBS@,$LIBS,;t t
+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s,@INSTALL_DATA@,$INSTALL_DATA,;t t
+s,@CYGPATH_W@,$CYGPATH_W,;t t
+s,@PACKAGE@,$PACKAGE,;t t
+s,@VERSION@,$VERSION,;t t
+s,@ACLOCAL@,$ACLOCAL,;t t
+s,@AUTOCONF@,$AUTOCONF,;t t
+s,@AUTOMAKE@,$AUTOMAKE,;t t
+s,@AUTOHEADER@,$AUTOHEADER,;t t
+s,@MAKEINFO@,$MAKEINFO,;t t
+s,@install_sh@,$install_sh,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
+s,@mkdir_p@,$mkdir_p,;t t
+s,@AWK@,$AWK,;t t
+s,@SET_MAKE@,$SET_MAKE,;t t
+s,@am__leading_dot@,$am__leading_dot,;t t
+s,@AMTAR@,$AMTAR,;t t
+s,@am__tar@,$am__tar,;t t
+s,@am__untar@,$am__untar,;t t
+s,@CXX@,$CXX,;t t
+s,@CXXFLAGS@,$CXXFLAGS,;t t
+s,@LDFLAGS@,$LDFLAGS,;t t
+s,@CPPFLAGS@,$CPPFLAGS,;t t
+s,@ac_ct_CXX@,$ac_ct_CXX,;t t
+s,@EXEEXT@,$EXEEXT,;t t
+s,@OBJEXT@,$OBJEXT,;t t
+s,@DEPDIR@,$DEPDIR,;t t
+s,@am__include@,$am__include,;t t
+s,@am__quote@,$am__quote,;t t
+s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
+s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
+s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
+s,@CXXDEPMODE@,$CXXDEPMODE,;t t
+s,@am__fastdepCXX_TRUE@,$am__fastdepCXX_TRUE,;t t
+s,@am__fastdepCXX_FALSE@,$am__fastdepCXX_FALSE,;t t
+s,@CC@,$CC,;t t
+s,@CFLAGS@,$CFLAGS,;t t
+s,@ac_ct_CC@,$ac_ct_CC,;t t
+s,@CCDEPMODE@,$CCDEPMODE,;t t
+s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
+s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
+s,@SPAMC@,$SPAMC,;t t
+s,@SENDMAIL@,$SENDMAIL,;t t
+s,@NROFF@,$NROFF,;t t
+s,@HAVE_MDOC_TRUE@,$HAVE_MDOC_TRUE,;t t
+s,@HAVE_MDOC_FALSE@,$HAVE_MDOC_FALSE,;t t
+s,@build@,$build,;t t
+s,@build_cpu@,$build_cpu,;t t
+s,@build_vendor@,$build_vendor,;t t
+s,@build_os@,$build_os,;t t
+s,@host@,$host,;t t
+s,@host_cpu@,$host_cpu,;t t
+s,@host_vendor@,$host_vendor,;t t
+s,@host_os@,$host_os,;t t
+s,@acx_pthread_config@,$acx_pthread_config,;t t
+s,@PTHREAD_CC@,$PTHREAD_CC,;t t
+s,@PTHREAD_LIBS@,$PTHREAD_LIBS,;t t
+s,@PTHREAD_CFLAGS@,$PTHREAD_CFLAGS,;t t
+s,@CXXCPP@,$CXXCPP,;t t
+s,@EGREP@,$EGREP,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
+CEOF
+
+_ACEOF
+
+ cat >>$CONFIG_STATUS <<\_ACEOF
+ # Split the substitutions into bite-sized pieces for seds with
+ # small command number limits, like on Digital OSF/1 and HP-UX.
+ ac_max_sed_lines=48
+ ac_sed_frag=1 # Number of current file.
+ ac_beg=1 # First line for current file.
+ ac_end=$ac_max_sed_lines # Line after last line for current file.
+ ac_more_lines=:
+ ac_sed_cmds=
+ while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ else
+ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ fi
+ if test ! -s $tmp/subs.frag; then
+ ac_more_lines=false
+ else
+ # The purpose of the label and of the branching condition is to
+ # speed up the sed processing (if there are no `@' at all, there
+ # is no need to browse any of the substitutions).
+ # These are the two extra sed commands mentioned above.
+ (echo ':t
+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+ fi
+ ac_sed_frag=`expr $ac_sed_frag + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_lines`
+ fi
+ done
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+ fi
+fi # test -n "$CONFIG_FILES"
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
+ esac
+
+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+ esac
+
+ if test x"$ac_file" != x-; then
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ rm -f "$ac_file"
+ fi
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ configure_input=
+ else
+ configure_input="$ac_file. "
+ fi
+ configure_input=$configure_input"Generated from `echo $ac_file_in |
+ sed 's,.*/,,'` by configure."
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ echo "$f";;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo "$f"
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo "$srcdir/$f"
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+ rm -f $tmp/stdin
+ if test x"$ac_file" != x-; then
+ mv $tmp/out $ac_file
+ else
+ cat $tmp/out
+ rm -f $tmp/out
+ fi
+
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_HEADER section.
+#
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
+ac_dB='[ ].*$,\1#\2'
+ac_dC=' '
+ac_dD=',;t'
+# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+ac_uB='$,\1#\2define\3'
+ac_uC=' '
+ac_uD=',;t'
+
+for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
+ esac
+
+ test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ # Do quote $f, to prevent DOS paths from being IFS'd.
+ echo "$f";;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo "$f"
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo "$srcdir/$f"
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
+ # Remove the trailing spaces.
+ sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
+
+_ACEOF
+
+# Transform confdefs.h into two sed scripts, `conftest.defines' and
+# `conftest.undefs', that substitutes the proper values into
+# config.h.in to produce config.h. The first handles `#define'
+# templates, and the second `#undef' templates.
+# And first: Protect against being on the right side of a sed subst in
+# config.status. Protect against being in an unquoted here document
+# in config.status.
+rm -f conftest.defines conftest.undefs
+# Using a here document instead of a string reduces the quoting nightmare.
+# Putting comments in sed scripts is not portable.
+#
+# `end' is used to avoid that the second main sed command (meant for
+# 0-ary CPP macros) applies to n-ary macro definitions.
+# See the Autoconf documentation for `clear'.
+cat >confdef2sed.sed <<\_ACEOF
+s/[\\&,]/\\&/g
+s,[\\$`],\\&,g
+t clear
+: clear
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
+t end
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
+: end
+_ACEOF
+# If some macros were called several times there might be several times
+# the same #defines, which is useless. Nevertheless, we may not want to
+# sort them, since we want the *last* AC-DEFINE to be honored.
+uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
+sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
+rm -f confdef2sed.sed
+
+# This sed command replaces #undef with comments. This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >>conftest.undefs <<\_ACEOF
+s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
+_ACEOF
+
+# Break up conftest.defines because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
+echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
+echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
+echo ' :' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.defines >/dev/null
+do
+ # Write a limited-size here document to $tmp/defines.sed.
+ echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
+ # Speed up: don't consider the non `#define' lines.
+ echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
+ # Work around the forget-to-reset-the-flag bug.
+ echo 't clr' >>$CONFIG_STATUS
+ echo ': clr' >>$CONFIG_STATUS
+ sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
+ echo 'CEOF
+ sed -f $tmp/defines.sed $tmp/in >$tmp/out
+ rm -f $tmp/in
+ mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+ sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
+ rm -f conftest.defines
+ mv conftest.tail conftest.defines
+done
+rm -f conftest.defines
+echo ' fi # grep' >>$CONFIG_STATUS
+echo >>$CONFIG_STATUS
+
+# Break up conftest.undefs because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.undefs >/dev/null
+do
+ # Write a limited-size here document to $tmp/undefs.sed.
+ echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
+ # Speed up: don't consider the non `#undef'
+ echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
+ # Work around the forget-to-reset-the-flag bug.
+ echo 't clr' >>$CONFIG_STATUS
+ echo ': clr' >>$CONFIG_STATUS
+ sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
+ echo 'CEOF
+ sed -f $tmp/undefs.sed $tmp/in >$tmp/out
+ rm -f $tmp/in
+ mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+ sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
+ rm -f conftest.undefs
+ mv conftest.tail conftest.undefs
+done
+rm -f conftest.undefs
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ echo "/* Generated by configure. */" >$tmp/config.h
+ else
+ echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
+ fi
+ cat $tmp/in >>$tmp/config.h
+ rm -f $tmp/in
+ if test x"$ac_file" != x-; then
+ if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
+ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ rm -f $ac_file
+ mv $tmp/config.h $ac_file
+ fi
+ else
+ cat $tmp/config.h
+ rm -f $tmp/config.h
+ fi
+# Compute $ac_file's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $ac_file | $ac_file:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
+$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X$ac_file : 'X\(//\)[^/]' \| \
+ X$ac_file : 'X\(//\)$' \| \
+ X$ac_file : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X$ac_file |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_COMMANDS section.
+#
+for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
+ ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
+ ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
+$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_dest" : 'X\(//\)[^/]' \| \
+ X"$ac_dest" : 'X\(//\)$' \| \
+ X"$ac_dest" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_dest" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+
+ { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
+echo "$as_me: executing $ac_dest commands" >&6;}
+ case $ac_dest in
+ depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`(dirname "$mf") 2>/dev/null ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`(dirname "$file") 2>/dev/null ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p $dirpart/$fdir
+ else
+ as_dir=$dirpart/$fdir
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
+echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+ ;;
+ esac
+done
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || { (exit 1); exit 1; }
+fi
+
--- /dev/null
+# Process this file with autoconf to produce a configure script.
+# $Id: configure.in,v 1.41 2005/02/04 18:55:32 dnelson Exp $
+AC_INIT(spamass-milter, 0.3.0)
+AC_PREREQ(2.53)
+AC_REVISION($Revision: 1.41 $)
+AC_CONFIG_SRCDIR([spamass-milter.cpp])
+
+# Initialize automake now
+AM_CONFIG_HEADER(config.h)
+AM_INIT_AUTOMAKE(AC_PACKAGE_NAME, AC_PACKAGE_VERSION)
+
+# Checks for programs.
+AC_PROG_CXX
+AC_PROG_CC
+VL_PROG_CC_WARNINGS
+CFLAGS="$CFLAGS $VL_WARN_CFLAGS"
+CXXFLAGS="$CXXFLAGS $VL_WARN_CFLAGS"
+AC_LANG(C++)
+
+# Enable useable exception handler if it exists.
+AC_CXX_VERBOSE_TERMINATE_HANDLER
+
+# Try and disable all inlining; gdb shows the inlined function in a
+# stack trace and you lose the caller's frame. Bad for debugging.
+AC_PIKE_COMPILER_FLAG(-fno-default-inline,fno_default_inline,CXXFLAGS)
+AC_PIKE_COMPILER_FLAG(-fno-inline,fno_inline,CXXFLAGS)
+
+#PIKE_INCLUDE_PATHS
+#PIKE_LIBRARY_PATHS
+
+# Search for spamc
+dnl AC_ARG_VAR(SPAMC,[Spamc command])
+AC_PATH_PROG(SPAMC, spamc)
+if test "x$SPAMC" = x ; then
+ AC_MSG_ERROR([Spamc not found. Is SpamAssassin installed?])
+fi
+AC_ARG_VAR(SPAMC, [Path to spamc])
+AC_DEFINE_UNQUOTED(SPAMC, "$SPAMC", [Path to spamc])
+
+# Search for sendmail
+AC_PATH_PROG(SENDMAIL, sendmail,, [$PATH:/usr/lib])
+if test "x$SENDMAIL" = x ; then
+ AC_MSG_ERROR([Sendmail not found. Check your $PATH variable])
+fi
+AC_ARG_VAR(SENDMAIL, [Path to sendmail])
+AC_DEFINE_UNQUOTED(SENDMAIL, "$SENDMAIL", [Path to sendmail])
+
+# Check nroff and the options it supports
+AC_CHECK_PROGS(NROFF, nroff)
+
+MDOC=no
+if test "x$NROFF" != x; then
+ AC_MSG_CHECKING([for mdoc nroff macros])
+ AC_CACHE_VAL(ac_cv_mdoc, [
+ nroff -mdoc < /dev/null > /dev/null 2>&1
+ if test $? = 0; then
+ ac_cv_mdoc=yes
+ else
+ ac_cv_mdoc=no
+ fi
+ ])
+ MDOC=$ac_cv_mdoc
+ AC_MSG_RESULT([$MDOC])
+fi
+
+AM_CONDITIONAL(HAVE_MDOC, test $MDOC = yes)
+
+# Search for pthreads, and make them the default (have to do it here else
+# the -lmilter check will fail to link)
+ACX_PTHREAD(,AC_MSG_ERROR([Cannot determine how to use pthreads]))
+CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+CXXFLAGS="$CXXFLAGS $PTHREAD_CFLAGS"
+LIBS="$LIBS $PTHREAD_LIBS"
+
+# Checks for header files.
+AC_HEADER_STDC
+AC_HEADER_SYS_WAIT
+AC_CHECK_HEADERS([fcntl.h syslog.h sys/cdefs.h sys/select.h])
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_TYPE_PID_T
+AC_TYPE_SIZE_T
+
+CF_GNU_SOURCE
+
+AC_ARG_ENABLE(emulate-poll, AC_HELP_STRING([--enable-emulate-poll],[use a select wrapper instead of poll (autodetected)]))
+
+# If the system doesn't have poll.h, or if the user forced it, provide
+# our own poll function
+if test x$enable_emulate_poll != xyes ; then
+AC_CHECK_HEADERS(poll.h)
+fi
+
+if test x$enable_emulate_poll = xyes -o x$ac_cv_header_poll_h = xno ; then
+AC_MSG_NOTICE([Emulating poll with select])
+AC_LIBOBJ(poll)
+fi
+
+DN_WITH_DMALLOC
+
+# Checks for library functions.
+AC_CHECK_FUNCS([vsyslog vasprintf vsnprintf])
+AC_CHECK_FUNCS([asprintf snprintf])
+AC_SEARCH_LIBS(gethostbyname, nsl)
+AC_SEARCH_LIBS(connect, socket)
+AC_SEARCH_LIBS(inet_aton, resolv)
+
+# Check for functions and verify that the system provides a prototype for them.
+# Switch to C linkage. Though the autoconf manual claims it does
+# automatically. It lies.
+AC_LANG_PUSH(C)
+AC_REPLACE_FUNCS(strsep daemon)
+AC_CHECK_DECLS([strsep, daemon])
+AC_LANG_POP(C)
+
+# Check for libmilter and its header files in the usual locations
+if test -d /usr/lib/libmilter ; then
+ LDFLAGS="$LDFLAGS -L/usr/lib/libmilter"
+fi
+AC_CHECK_LIB(milter, mi_stop,,[
+ # Older sendmails require libsm for support functions
+ AC_SEARCH_LIBS(strlcpy, sm smutil)
+ $as_unset ac_cv_lib_milter_mi_stop
+ AC_CHECK_LIB(milter, mi_stop,,[
+ AC_MSG_ERROR([Cannot find libmilter])
+ ])
+])
+AC_CHECK_HEADERS(libmilter/mfapi.h,,[
+ AC_MSG_ERROR([Please install mfapi.h from the sendmail distribution])
+])
+
+# Files to create from .in templates:
+AC_OUTPUT(Makefile contrib/spamass-milter.spec spamass-milter.1)
--- /dev/null
+$Id: README.gnus,v 1.1 2002/01/16 22:16:46 greve Exp $
+
+Supplement for GNUS users (http://www.gnus.org):
+
+If you add the following function to your .gnus and bind it to a key,
+you will be able to submit Spam to Vipul's Razor Spam Database and
+expire spam that got through the SpamAssassin on a single keypress.
+
+ (defun my-gnus-raze-spam ()
+ "Submit SPAM to Vipul's Razor for a good shave, then mark it as expirable."
+ (interactive)
+ (gnus-summary-show-raw-article)
+ (gnus-summary-save-in-pipe "razor-report -f -d")
+ (gnus-summary-mark-as-expirable 1))
+
+Using Vipul's Razor (http://razor.sourceforge.net) seems like a very
+good idea and submitting things might save others from having to see
+this spam.
+
+Of course you'll need to have the Vipul's Razor software installed.
+
+Under Debian, "apt-get install razor" will normally do the trick.
+
--- /dev/null
+#!/bin/sh
+#
+# $Id: spamass-milter,v 1.4 2002/07/24 16:19:53 dnelson Exp $
+#
+# Sample init script for Debian GNU/Linux
+#
+# Copyright (c) 2002 Georg C. F. Greve <greve@gnu.org>,
+# all rights maintained by FSF Europe e.V.,
+# Villa Vogelsang, Antonienallee 1, 45279 Essen, Germany
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# Contact:
+# Michael Brown <michaelb@opentext.com>
+#
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+DAEMON=/etc/mail/bin/spamass-milter
+SOCKET=/var/run/sendmail/spamass.sock
+DESC="Sendmail milter plugin for SpamAssassin"
+
+test -x $DAEMON || exit 0
+
+set -e
+
+case "$1" in
+ start)
+ echo -n "Starting $DESC: "
+
+ start-stop-daemon --start -b --exec $DAEMON --oknodo -- -p $SOCKET
+
+ echo "${DAEMON}"
+ ;;
+ stop)
+ echo -n "Stopping $DESC: "
+
+ start-stop-daemon --stop --exec $DAEMON --oknodo
+ /bin/sleep 5s
+ /bin/rm -f $SOCKET
+
+ echo "${DAEMON}"
+ ;;
+ restart)
+ echo -n "Restarting $DESC: "
+
+ start-stop-daemon --stop --exec $DAEMON --oknod
+ /bin/sleep 5s
+ /bin/rm -f $SOCKET
+ start-stop-daemon --start -b --exec $DAEMON --oknodo -- -p $SOCKET
+
+ echo "${DAEMON}"
+
+ ;;
+ *)
+ N=$0
+ echo "Usage: $N {start|stop|restart}" >&2
+ exit 1
+ ;;
+esac
+
+exit 0
--- /dev/null
+#!/bin/sh
+#
+# $Id: spamass-milter-redhat.rc,v 1.4 2003/03/06 21:33:51 dnelson Exp $
+#
+# spamass-milter This script starts and stops the spamass-milter daemon
+#
+# chkconfig: 2345 80 30
+#
+# description: spamass-milter is a daemon which hooks into sendmail and routes
+# email messages to spamassassin
+# processname: spamass-milter
+
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+# Source networking configuration.
+. /etc/sysconfig/network
+
+# Local spamass-milter config
+SM_SOCKET=/var/run/spamass.sock
+SM_EXTRA_FLAGS=
+[ -f /etc/sysconfig/spamass-milter ] && . /etc/sysconfig/spamass-milter
+
+# Check that networking is up.
+[ ${NETWORKING} = "no" ] && exit 0
+
+[ -x /usr/sbin/spamass-milter ] || exit 0
+PATH=$PATH:/usr/sbin
+
+RETVAL=0
+
+start() {
+ echo -n "Starting spamass-milter: "
+ daemon spamass-milter -p ${SM_SOCKET} -f ${SM_EXTRA_FLAGS}
+ RETVAL=$?
+ echo
+ test $RETVAL -eq 0 && touch /var/lock/subsys/spamass-milter
+ return $RETVAL
+}
+
+stop() {
+ echo -n "Shutting down spamass-milter: "
+ killproc spamass-milter
+ RETVAL=$?
+ echo
+ test $RETVAL -eq 0 && rm -f /var/lock/subsys/spamass-milter
+}
+
+restart() {
+ stop
+ start
+}
+
+# See how we were called.
+case "$1" in
+ start)
+ # Start daemon.
+ start
+ ;;
+ stop)
+ # Stop daemon.
+ stop
+ ;;
+ restart|reload)
+ restart
+ ;;
+ condrestart)
+ test -f /var/lock/subsys/spamass-milter && $0 restart || :
+ ;;
+ status)
+ status spamass-milter
+ ;;
+ *)
+ echo "Usage: $0 {start|stop|reload|restart|condrestart|status}"
+ exit 1
+esac
+
+exit $?
--- /dev/null
+#! /bin/sh
+#
+# /usr/local/etc/rc.d script for FreeBSD
+# $Id: spamass-milter.sh,v 1.4 2004/02/09 23:03:29 dnelson Exp $
+
+# PROVIDE: spamass_milter
+# KEYWORD: FreeBSD
+
+. /usr/local/etc/rc.subr
+
+name=spamass_milter
+rcvar=`set_rcvar`
+
+command=/usr/local/sbin/spamass-milter
+
+# Override the spamass_milter_* variables in one of these files:
+# /etc/rc.conf
+# /etc/rc.conf.local
+# /etc/rc.conf.d/spamass-milter
+#
+# DO NOT CHANGE THESE DEFAULT VALUES HERE
+#
+# spamass_milter_enable YES or NO
+# spamass_milter_flags extra flags to pass to spamass-milter
+#
+# You probably won't need to change these unless you're running as
+# non-root (see the rc.subr manpage for those flags):
+#
+# spamass_milter_pidfile path to pidfile
+# spamass_milter_sockfile path to milter socket
+
+# load settings
+load_rc_config $name
+
+spamass_milter_enable=${spamass_milter_enable:-NO}
+spamass_milter_pidfile=${spamass_milter_pidfile:-/var/run/spamass-milter.pid}
+spamass_milter_sockfile=${spamass_milter_sockfile:-/var/run/spamass.sock}
+pidfile=${spamass_milter_pidfile}
+spamass_milter_flags="-p $spamass_milter_sockfile -f -P $spamass_milter_pidfile $spamass_milter_flags"
+
+run_rc_command "$1"
+
+exit 1
+
+
+if ! PREFIX=$(expr $(realpath $0) : "\(/.*\)/etc/rc\.d/$(basename $0)\$"); then
+ echo "$0: Cannot determine the PREFIX - aborting" >&2
+ exit 1
+fi
+
+case "$1" in
+start)
+ rm -f /var/run/spamass.sock
+ [ -x ${PREFIX}/sbin/spamass-milter ] &&
+ ${PREFIX}/sbin/spamass-milter -p /var/run/spamass.sock -f -P /var/run/spamass-milter.pid &&
+ echo -n ' spamass-milter'
+ ;;
+stop)
+ if [ -s /var/run/spamass-milter.pid ] ; then
+ pid=$(cat /var/run/spamass-milter.pid)
+ kill -TERM $pid
+ loop=0
+ while [ $loop -lt 10 ] ; do
+ kill -0 $pid >/dev/null 2>&1 || break
+ [ $loop -eq 1 ] && echo -n "Sleeping for 10 seconds to allow spamass-milter to shutdown"
+ [ $loop -ge 1 ] && echo -n "."
+ sleep 1
+ loop=$(( $loop + 1 ))
+ done
+ kill -0 $pid >/dev/null 2>&1 && echo "giving up" || echo "done"
+ fi
+
+ ;;
+*)
+ echo "Usage: `basename $0` {start|stop}" >&2
+ ;;
+esac
+
+exit 0
--- /dev/null
+Summary: Spamassassin Milter
+Name: spamass-milter
+Version: 0.3.0
+Release: 3
+Source: spamass-milter-%{version}.tar.gz
+Url: http://savannah.gnu.org/projects/spamass-milt/
+Copyright: GPL
+Group: System Environment/Daemons
+BuildRoot: /var/tmp/%{name}-root
+BuildRequires: spamassassin
+Requires: spamassassin
+# Requires sendmail to have milter support, too.
+Requires: sendmail
+# This is for libmilter &c.
+BuildRequires: sendmail-devel
+# And this is for building the config scripts
+BuildRequires: autoconf253 automake15
+
+%description
+A little plugin for the Sendmail Milter (Mail Filter) library that pipes all
+incoming mail (including things received by rmail/UUCP) through the
+SpamAssassin, a highly customizable SpamFilter.
+
+%prep
+%setup -q
+
+%build
+%configure
+make
+
+%install
+%makeinstall
+mkdir -p $RPM_BUILD_ROOT%{_initrddir}
+install -m755 contrib/spamass-milter-redhat.rc \
+ $RPM_BUILD_ROOT%{_initrddir}/spamass-milter
+
+%preun
+test "$1" != "0" && exit 0
+service spamass-milter stop
+chkconfig --del spamass-milter
+
+%post
+chkconfig --add spamass-milter
+service spamass-milter condrestart
+
+%clean
+test "$RPM_BUILD_ROOT" = "/" || rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%doc AUTHORS ChangeLog NEWS README
+%{_sbindir}/spamass-milter
+%{_initrddir}/spamass-milter
+%{_mandir}/man1/spamass-milter.1*
+
+%changelog
+* Mon Aug 19 2002 Fritz Elfert <fritz.elfert@to.com>
+ - Use RPM macros everywhere (this fixes install of manpage)
+ - Changed Group to an official group of RedHat
+ - Added preun and post scriptlets
+ - Made clean scriptlet foolproof
+ - Added condrestart to redhat rc script
--- /dev/null
+Summary: Spamassassin Milter
+Name: spamass-milter
+Version: @VERSION@
+Release: 3
+Source: spamass-milter-%{version}.tar.gz
+Url: http://savannah.gnu.org/projects/spamass-milt/
+Copyright: GPL
+Group: System Environment/Daemons
+BuildRoot: /var/tmp/%{name}-root
+BuildRequires: spamassassin
+Requires: spamassassin
+# Requires sendmail to have milter support, too.
+Requires: sendmail
+# This is for libmilter &c.
+BuildRequires: sendmail-devel
+# And this is for building the config scripts
+BuildRequires: autoconf253 automake15
+
+%description
+A little plugin for the Sendmail Milter (Mail Filter) library that pipes all
+incoming mail (including things received by rmail/UUCP) through the
+SpamAssassin, a highly customizable SpamFilter.
+
+%prep
+%setup -q
+
+%build
+%configure
+make
+
+%install
+%makeinstall
+mkdir -p $RPM_BUILD_ROOT%{_initrddir}
+install -m755 contrib/spamass-milter-redhat.rc \
+ $RPM_BUILD_ROOT%{_initrddir}/spamass-milter
+
+%preun
+test "$1" != "0" && exit 0
+service spamass-milter stop
+chkconfig --del spamass-milter
+
+%post
+chkconfig --add spamass-milter
+service spamass-milter condrestart
+
+%clean
+test "$RPM_BUILD_ROOT" = "/" || rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%doc AUTHORS ChangeLog NEWS README
+%{_sbindir}/spamass-milter
+%{_initrddir}/spamass-milter
+%{_mandir}/man1/spamass-milter.1*
+
+%changelog
+* Mon Aug 19 2002 Fritz Elfert <fritz.elfert@to.com>
+ - Use RPM macros everywhere (this fixes install of manpage)
+ - Changed Group to an official group of RedHat
+ - Added preun and post scriptlets
+ - Made clean scriptlet foolproof
+ - Added condrestart to redhat rc script
--- /dev/null
+/*-
+ * Copyright (c) 1990, 1993
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the University of
+ * California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#if defined(LIBC_SCCS) && !defined(lint)
+static char sccsid[] = "@(#)daemon.c 8.1 (Berkeley) 6/4/93";
+#endif /* LIBC_SCCS and not lint */
+/* $FreeBSD: src/lib/libc/gen/daemon.c,v 1.5 2002/02/01 00:57:29 obrien Exp $ */
+
+/* $Id: daemon.c,v 1.1 2003/10/21 21:40:32 dnelson Exp $ */
+
+#include <fcntl.h>
+#include <paths.h>
+#include <unistd.h>
+
+int
+daemon(nochdir, noclose)
+ int nochdir, noclose;
+{
+ int fd;
+
+ switch (fork()) {
+ case -1:
+ return (-1);
+ case 0:
+ break;
+ default:
+ _exit(0);
+ }
+
+ if (setsid() == -1)
+ return (-1);
+
+ if (!nochdir)
+ (void)chdir("/");
+
+ if (!noclose && (fd = open(_PATH_DEVNULL, O_RDWR, 0)) != -1) {
+ (void)dup2(fd, STDIN_FILENO);
+ (void)dup2(fd, STDOUT_FILENO);
+ (void)dup2(fd, STDERR_FILENO);
+ if (fd > 2)
+ (void)~close(fd);
+ }
+ return (0);
+}
--- /dev/null
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2004-12-17.09
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c (ignored)
+-d create directories instead of installing files.
+-g GROUP $chgrpprog installed files to GROUP.
+-m MODE $chmodprog installed files to MODE.
+-o USER $chownprog installed files to USER.
+-s $stripprog installed files.
+-t DIRECTORY install into DIRECTORY.
+-T report an error if DSTFILE is a directory.
+--help display this help and exit.
+--version display version info and exit.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+ case $1 in
+ -c) shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ --help) echo "$usage"; exit 0;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
+
+ -t) dstarg=$2
+ shift
+ shift
+ continue;;
+
+ -T) no_target_directory=true
+ shift
+ continue;;
+
+ --version) echo "$0 $scriptversion"; exit 0;;
+
+ *) # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ test -n "$dir_arg$dstarg" && break
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dstarg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dstarg"
+ shift # fnord
+ fi
+ shift # arg
+ dstarg=$arg
+ done
+ break;;
+ esac
+done
+
+if test -z "$1"; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src ;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ src=
+
+ if test -d "$dst"; then
+ mkdircmd=:
+ chmodcmd=
+ else
+ mkdircmd=$mkdirprog
+ fi
+ else
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dstarg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dstarg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst ;;
+ esac
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dstarg: Is a directory" >&2
+ exit 1
+ fi
+ dst=$dst/`basename "$src"`
+ fi
+ fi
+
+ # This sed command emulates the dirname command.
+ dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+
+ # Make sure that the destination directory exists.
+
+ # Skip lots of stat calls in the usual case.
+ if test ! -d "$dstdir"; then
+ defaultIFS='
+ '
+ IFS="${IFS-$defaultIFS}"
+
+ oIFS=$IFS
+ # Some sh's can't handle IFS=/ for some reason.
+ IFS='%'
+ set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+ shift
+ IFS=$oIFS
+
+ pathcomp=
+
+ while test $# -ne 0 ; do
+ pathcomp=$pathcomp$1
+ shift
+ if test ! -d "$pathcomp"; then
+ $mkdirprog "$pathcomp"
+ # mkdir can fail with a `File exist' error in case several
+ # install-sh are creating the directory concurrently. This
+ # is OK.
+ test -d "$pathcomp" || exit
+ fi
+ pathcomp=$pathcomp/
+ done
+ fi
+
+ if test -n "$dir_arg"; then
+ $doit $mkdircmd "$dst" \
+ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+ else
+ dstfile=`basename "$dst"`
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Copy the file name to the temp name.
+ $doit $cpprog "$src" "$dsttmp" &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+ # Now rename the file to the real destination.
+ { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+ || {
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ if test -f "$dstdir/$dstfile"; then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+ || {
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ (exit 1); exit 1
+ }
+ else
+ :
+ fi
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+ }
+ }
+ fi || { (exit 1); exit 1; }
+done
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+ (exit 0); exit 0
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
--- /dev/null
+#!/usr/bin/awk
+#
+# $Id: mdoc2man.awk,v 1.3 2003/09/05 16:33:51 dnelson Exp $
+#
+# Version history:
+# v3, I put the program under a proper license
+# Dan Nelson <dnelson@allantgroup.com> added .An, .Aq and fixed a typo
+# v2, fixed to work on GNU awk --posix and MacOS X
+# v1, first attempt, didn't work on MacOS X
+#
+# Copyright (c) 2003 Peter Stuge <stuge-mdoc2man@cdy.org>
+#
+# Permission to use, copy, modify, and distribute this software for any
+# purpose with or without fee is hereby granted, provided that the above
+# copyright notice and this permission notice appear in all copies.
+#
+# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+
+BEGIN {
+ optlist=0
+ oldoptlist=0
+ nospace=0
+ synopsis=0
+ reference=0
+ block=0
+ ext=0
+ extopt=0
+ literal=0
+ prenl=0
+ line=""
+}
+
+function wtail() {
+ retval=""
+ while(w<nwords) {
+ if(length(retval))
+ retval=retval OFS
+ retval=retval words[++w]
+ }
+ return retval
+}
+
+function add(str) {
+ for(;prenl;prenl--)
+ line=line "\n"
+ line=line str
+}
+
+! /^\./ {
+ for(;prenl;prenl--)
+ print ""
+ print
+ if(literal)
+ print ".br"
+ next
+}
+
+/^\.\\"/ { next }
+
+{
+ option=0
+ parens=0
+ angles=0
+ sub("^\\.","")
+ nwords=split($0,words)
+ for(w=1;w<=nwords;w++) {
+ skip=0
+ if(match(words[w],"^Li|Pf$")) {
+ skip=1
+ } else if(match(words[w],"^Xo$")) {
+ skip=1
+ ext=1
+ if(length(line)&&!(match(line," $")||prenl))
+ add(OFS)
+ } else if(match(words[w],"^Xc$")) {
+ skip=1
+ ext=0
+ if(!extopt)
+ prenl++
+ w=nwords
+ } else if(match(words[w],"^Bd$")) {
+ skip=1
+ if(match(words[w+1],"-literal")) {
+ literal=1
+ prenl++
+ w=nwords
+ }
+ } else if(match(words[w],"^Ed$")) {
+ skip=1
+ literal=0
+ } else if(match(words[w],"^Ns$")) {
+ skip=1
+ if(!nospace)
+ nospace=1
+ sub(" $","",line)
+ } else if(match(words[w],"^No$")) {
+ skip=1
+ sub(" $","",line)
+ add(words[++w])
+ } else if(match(words[w],"^Dq$")) {
+ skip=1
+ add("``")
+ add(words[++w])
+ while(w<nwords&&!match(words[w+1],"^[\\.,]"))
+ add(OFS words[++w])
+ add("''")
+ if(!nospace&&match(words[w+1],"^[\\.,]"))
+ nospace=1
+ } else if(match(words[w],"^Sq|Ql$")) {
+ skip=1
+ add("`" words[++w] "'")
+ if(!nospace&&match(words[w+1],"^[\\.,]"))
+ nospace=1
+ } else if(match(words[w],"^Oo$")) {
+ skip=1
+ extopt=1
+ if(!nospace)
+ nospace=1
+ add("[")
+ } else if(match(words[w],"^Oc$")) {
+ skip=1
+ extopt=0
+ add("]")
+ }
+ if(!skip) {
+ if(!nospace&&length(line)&&!(match(line," $")||prenl))
+ add(OFS)
+ if(nospace==1)
+ nospace=0
+ }
+ if(match(words[w],"^Dd$")) {
+ date=wtail()
+ next
+ } else if(match(words[w],"^Dt$")) {
+ id=wtail()
+ next
+ } else if(match(words[w],"^Os$")) {
+ add(".TH " id " \"" date "\" \"" wtail() "\"")
+ } else if(match(words[w],"^Sh$")) {
+ add(".SH")
+ synopsis=match(words[w+1],"SYNOPSIS")
+ } else if(match(words[w],"^Xr$")) {
+ add("\\fB" words[++w] "\\fP(" words[++w] ")" words[++w])
+ } else if(match(words[w],"^Rs$")) {
+ split("",refauthors)
+ nrefauthors=0
+ reftitle=""
+ refissue=""
+ refdate=""
+ refopt=""
+ reference=1
+ next
+ } else if(match(words[w],"^Re$")) {
+ prenl++
+ for(i=nrefauthors-1;i>0;i--) {
+ add(refauthors[i])
+ if(i>1)
+ add(", ")
+ }
+ if(nrefauthors>1)
+ add(" and ")
+ add(refauthors[0] ", \\fI" reftitle "\\fP")
+ if(length(refissue))
+ add(", " refissue)
+ if(length(refdate))
+ add(", " refdate)
+ if(length(refopt))
+ add(", " refopt)
+ add(".")
+ reference=0
+ } else if(reference) {
+ if(match(words[w],"^%A$")) { refauthors[nrefauthors++]=wtail() }
+ if(match(words[w],"^%T$")) {
+ reftitle=wtail()
+ sub("^\"","",reftitle)
+ sub("\"$","",reftitle)
+ }
+ if(match(words[w],"^%N$")) { refissue=wtail() }
+ if(match(words[w],"^%D$")) { refdate=wtail() }
+ if(match(words[w],"^%O$")) { refopt=wtail() }
+ } else if(match(words[w],"^Nm$")) {
+ if(synopsis) {
+ add(".br")
+ prenl++
+ }
+ n=words[++w]
+ if(!length(name))
+ name=n
+ if(!length(n))
+ n=name
+ add("\\fB" n "\\fP")
+ if(!nospace&&match(words[w+1],"^[\\.,]"))
+ nospace=1
+ } else if(match(words[w],"^Nd$")) {
+ add("\\- " wtail())
+ } else if(match(words[w],"^Fl$")) {
+ add("\\fB\\-" words[++w] "\\fP")
+ if(!nospace&&match(words[w+1],"^[\\.,]"))
+ nospace=1
+ } else if(match(words[w],"^Ar$")) {
+ add("\\fI")
+ if(w==nwords)
+ add("file ...\\fP")
+ else {
+ add(words[++w] "\\fP")
+ while(match(words[w+1],"^\\|$"))
+ add(OFS words[++w] " \\fI" words[++w] "\\fP")
+ }
+ if(!nospace&&match(words[w+1],"^[\\.,]"))
+ nospace=1
+ } else if(match(words[w],"^Cm$")) {
+ add("\\fB" words[++w] "\\fP")
+ while(w<nwords&&match(words[w+1],"^[\\.,:;)]"))
+ add(words[++w])
+ } else if(match(words[w],"^Op$")) {
+ option=1
+ if(!nospace)
+ nospace=1
+ add("[")
+ } else if(match(words[w],"^Pp$")) {
+ prenl++
+ } else if(match(words[w],"^An$")) {
+ prenl++
+ } else if(match(words[w],"^Ss$")) {
+ add(".SS")
+ } else if(match(words[w],"^Pa$")&&!option) {
+ add("\\fI")
+ w++
+ if(match(words[w],"^\\."))
+ add("\\&")
+ add(words[w] "\\fP")
+ while(w<nwords&&match(words[w+1],"^[\\.,:;)]"))
+ add(words[++w])
+ } else if(match(words[w],"^Dv$")) {
+ add(".BR")
+ } else if(match(words[w],"^Em|Ev$")) {
+ add(".IR")
+ } else if(match(words[w],"^Pq$")) {
+ add("(")
+ nospace=1
+ parens=1
+ } else if(match(words[w],"^Aq$")) {
+ add("<")
+ nospace=1
+ angles=1
+ } else if(match(words[w],"^S[xy]$")) {
+ add(".B " wtail())
+ } else if(match(words[w],"^Ic$")) {
+ plain=1
+ add("\\fB")
+ while(w<nwords) {
+ w++
+ if(match(words[w],"^Op$")) {
+ w++
+ add("[")
+ words[nwords]=words[nwords] "]"
+ }
+ if(match(words[w],"^Ar$")) {
+ add("\\fI" words[++w] "\\fP")
+ } else if(match(words[w],"^[\\.,]")) {
+ sub(" $","",line)
+ if(plain) {
+ add("\\fP")
+ plain=0
+ }
+ add(words[w])
+ } else {
+ if(!plain) {
+ add("\\fB")
+ plain=1
+ }
+ add(words[w])
+ }
+ if(!nospace)
+ add(OFS)
+ }
+ sub(" $","",line)
+ if(plain)
+ add("\\fP")
+ } else if(match(words[w],"^Bl$")) {
+ oldoptlist=optlist
+ if(match(words[w+1],"-bullet"))
+ optlist=1
+ else if(match(words[w+1],"-enum")) {
+ optlist=2
+ enum=0
+ } else if(match(words[w+1],"-tag"))
+ optlist=3
+ else if(match(words[w+1],"-item"))
+ optlist=4
+ else if(match(words[w+1],"-bullet"))
+ optlist=1
+ w=nwords
+ } else if(match(words[w],"^El$")) {
+ optlist=oldoptlist
+ } else if(match(words[w],"^It$")&&optlist) {
+ if(optlist==1)
+ add(".IP \\(bu")
+ else if(optlist==2)
+ add(".IP " ++enum ".")
+ else if(optlist==3) {
+ add(".TP")
+ prenl++
+ if(match(words[w+1],"^Pa|Ev$")) {
+ add(".B")
+ w++
+ }
+ } else if(optlist==4)
+ add(".IP")
+ } else if(match(words[w],"^Sm$")) {
+ if(match(words[w+1],"off"))
+ nospace=2
+ else if(match(words[w+1],"on"))
+ nospace=0
+ w++
+ } else if(!skip) {
+ add(words[w])
+ }
+ }
+ if(match(line,"^\\.[^a-zA-Z]"))
+ sub("^\\.","",line)
+ if(parens)
+ add(")")
+ if(angles)
+ add(">")
+ if(option)
+ add("]")
+ if(ext&&!extopt&&!match(line," $"))
+ add(OFS)
+ if(!ext&&!extopt&&length(line)) {
+ print line
+ prenl=0
+ line=""
+ }
+}
--- /dev/null
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2004-09-07.08
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004
+# Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case "$1" in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit 0
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit 0
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+ lex|yacc)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case "$f" in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f y.tab.h ]; then
+ echo >y.tab.h
+ fi
+ if [ ! -f y.tab.c ]; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f lex.yy.c ]; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
+ makeinfo)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+ fi
+ touch $file
+ ;;
+
+ tar)
+ shift
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case "$firstarg" in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case "$firstarg" in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
--- /dev/null
+#include "config.h"
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/time.h>
+#ifdef HAVE_SYS_SELECT_H
+#include <sys/select.h>
+#endif
+
+#include "subst_poll.h"
+
+/* This function pulled from Markus Gutschke's "wy60" package */
+
+/* $Id: poll.c,v 1.4 2003/06/09 15:57:35 dnelson Exp $ */
+
+int poll(struct pollfd *fds, unsigned long nfds, int timeout) {
+ // This emulation function is somewhat limited. Most notably, it will never
+ // report POLLERR, POLLHUP, or POLLNVAL. The calling code has to detect
+ // these error conditions by some other means (typically by read() or write()
+ // reporting end-of-file).
+ fd_set readFds, writeFds, exceptionFds;
+ struct timeval *timeoutPtr, timeoutStruct;
+ int i, rc, fd;
+
+ FD_ZERO(&readFds);
+ FD_ZERO(&writeFds);
+ FD_ZERO(&exceptionFds);
+ fd = -1;
+ for (i = nfds; i--; ) {
+ if (fds[i].events & POLLIN)
+ FD_SET(fds[i].fd, &readFds);
+ if (fds[i].events & POLLOUT)
+ FD_SET(fds[i].fd, &writeFds);
+ if (fds[i].events & POLLPRI)
+ FD_SET(fds[i].fd, &exceptionFds);
+ if (fds[i].fd > fd)
+ fd = fds[i].fd;
+ fds[i].revents = 0;
+ }
+ if (timeout < 0)
+ timeoutPtr = NULL;
+ else {
+ timeoutStruct.tv_sec = timeout/1000;
+ timeoutStruct.tv_usec = (timeout%1000) * 1000;
+ timeoutPtr = &timeoutStruct;
+ }
+ i = select(fd + 1, &readFds, &writeFds, &exceptionFds,
+ timeoutPtr);
+ if (i <= 0)
+ rc = i;
+ else {
+ rc = 0;
+ for (i = nfds; i--; ) {
+ if (FD_ISSET(fds[i].fd, &readFds))
+ fds[i].revents |= POLLIN;
+ if (FD_ISSET(fds[i].fd, &writeFds))
+ fds[i].revents |= POLLOUT;
+ if (FD_ISSET(fds[i].fd, &exceptionFds))
+ fds[i].revents |= POLLPRI;
+ if (fds[i].revents)
+ rc++;
+ }
+ }
+ return(rc);
+}
--- /dev/null
+.\" $Id: spamass-milter.1.in,v 1.19 2004/03/18 18:37:08 dnelson Exp $
+.Dd July 25, 2001
+.Os
+.Dt SPAMASS_MILTER 8
+.Sh NAME
+.Nm spamass-milter
+.Nd sendmail milter for passing emails through SpamAssassin
+.Sh SYNOPSIS
+.Nm
+.Fl p Ar socket
+.Op Fl b Ns | Ns Fl B Ar spamaddress
+.Op Fl d Ar debugflags
+.Op Fl D Ar host
+.Op Fl e Ar defaultdomain
+.Op Fl f
+.Op Fl i Ar networks
+.Op Fl m
+.Op Fl M
+.Op Fl P Ar pidfile
+.Op Fl r Ar nn
+.Op Fl u Ar defaultuser
+.Op Fl x
+.Op Fl - Ar spamc flags ...
+.Sh DESCRIPTION
+The
+.Nm
+utility is a sendmail milter that checks and modifies incoming email
+messages with SpamAssassin.
+.Pp
+The following options are available:
+.Bl -tag -width "indent"
+.It Fl p Ar socket
+Specifies the pathname of a socket to create for communication with
+.Nm sendmail .
+If it is removed,
+.Nm sendmail
+will not be able to access the milter.
+This may cause messages to bounce, queue, or be passed through
+unmiltered, depending on the parameters in
+.Nm sendmail Ns 's .cf file.
+.It Fl b Ar spamaddress
+Redirects tagged spam to the specified email address.
+All envelope recipients are removed, and inserted into the message as
+.Ql X-Spam-Orig-To:
+headers.
+.It Fl B Ar spamaddress
+Same as
+.Fl b ,
+except the original recipients are retained.
+Only one of
+.Fl b
+and
+.Fl B
+may be used.
+.It Fl d Ar debugflags
+Enables logging.
+.Ar debugflags
+is a comma-separated list of tokens:
+.Bl -tag -width "indent"
+.It func
+Entry and exit of internal functions.
+.It misc
+Other non-verbose logging.
+.It net
+Lookups of the ignored netblocks list.
+.It poll
+Low-level I/O to the child spamc process.
+.It rcpt
+Recipient processing.
+.It spamc
+High-level I/O to the child spamc process.
+.It str
+Calls to field lookup and string comparison functions.
+.It uori
+Calls to the update_or_insert function.
+.It 1
+(historical) Same as
+.Ar func,misc .
+.It 2
+(historical) Same as
+.Ar func,misc,poll .
+.It 3
+(historical) Same as
+.Ar func,misc,poll,str,uori .
+.El
+.It Fl D Ar host
+Connects to a remote spamd server on
+.Ar host ,
+instead of using one on localhost.
+This option is deprecated; use
+.Fl - Fl d Ar host
+instead.
+.It Fl e Ar defaultdomain
+Pass the full user@domain address to spamc.
+The default is to pass only the username part on the assumption that
+all users are local.
+This flag is useful if you are using an SQL (or other username) backend
+with spamassassin and have listed the full address there.
+If the recipient name has no domain part (if the recipient is on the
+local machine for example),
+.Ar defaultdomain
+is added.
+Requires the
+.Fl u
+flag.
+.It Fl f
+Causes
+.Nm
+to fork into the background.
+.It Fl i Ar networks
+Ignores messages if the originating IP is in the network(s) listed.
+The message will be passed through without calling SpamAssassin at all.
+.Ar networks
+is a comma-separated list, where each element can be either an IP address
+(nnn.nnn.nnn.nnn), a CIDR network (nnn.nnn.nnn.nnn/nn), or a network/netmask
+pair (nnn.nnn.nnn.nnn/nnn.nnn.nnn.nnn).
+Multiple
+.Fl i
+flags will append to the list.
+For example, if you list all your internal networks, no outgoing emails
+will be filtered.
+.It Fl m
+Disables modification of the
+.Ql Subject:
+and
+.Ql Content-Type:
+headers and
+message body.
+This is useful when SpamAssassin is configured with
+.Ql "defang_mime 0"
+and
+.Ql "report_header 1" ,
+or when SA is simply used to add headers for postprocessing later.
+Updating the body through the milter interface can be slow for large
+messages.
+.It Fl M
+Like
+.Fl m ,
+but also disables creation of any SpamAssassin
+.Ql X-Spam-*
+headers as well.
+Both tagged and untagged mail gets passed through unchanged.
+To be useful, this option should be used with the
+.Fl r ,
+.Fl b ,
+or
+.Fl B
+flags.
+If
+.Fl b
+is used, the
+.Ql X-Spam-Orig-To:
+headers will still be added.
+.It Fl P Ar pidfile
+Create the file
+.Ar pidfile ,
+containing the processid of the milter.
+.It Fl r Ar nn
+Reject scanned email if it greater than or equal to
+.Ar nn .
+If
+.Ar -1 ,
+reject scanned email if SpamAssassin tags it as spam (useful if you
+are also using the
+.Fl u
+flag, and users have changed their required_hits value).
+.Pp
+For example, if you usually use procmail to redirect tagged email into
+a separate folder just in case of false positives, you can use
+.Fl r Ar 15
+and reject flagrant spam outright while still receiving low-scoring
+messages.
+.It Fl u Ar defaultuser
+Pass the username part of the first recipient to spamc with the
+.Fl u
+flag.
+This allows user preferences files to be used.
+If the message is addressed to multiple recipients, the username
+.Ar defaultuser
+is passed instead.
+.Pp
+Note that
+.Nm
+does not know whether an email is incoming or outgoing, so a message
+from
+.Aq user1@localdomain.com
+to
+.Aq user2@yahoo.com
+will make
+.Nm
+pass
+.Fl u Ar user2
+to spamc.
+.It Fl x
+Pass the recipient address through
+.Nm sendmail Fl bv ,
+which will perform virtusertable and alias expansion.
+The resulting username is then passed to spamc.
+Requires the
+.Fl u
+flag.
+.It Fl - Ar spamc flags ...
+Pass all remaining options to spamc.
+This allows you to connect to a remote spamd with
+.Fl d
+or
+.Fl p .
+.El
+.Sh FILES
+.Bl -tag -width "indent"
+.It Pa @SPAMC@
+client interface to SpamAssassin
+.El
+.Sh SEE ALSO
+.Xr spamassassin 1 ,
+.Xr spamd 1
+.Sh AUTHORS
+.An "Georg C. F. Greve" Aq greve@gnu.org
+.An "Dan Nelson" Aq dnelson@allantgroup.com
--- /dev/null
+//
+//
+// $Id: spamass-milter.cpp,v 1.86 2005/02/05 07:03:22 dnelson Exp $
+//
+// SpamAss-Milter
+// - a rather trivial SpamAssassin Sendmail Milter plugin
+//
+// for information about SpamAssassin please see
+// http://www.spamassassin.org
+//
+// for information about Sendmail please see
+// http://www.sendmail.org
+//
+// Copyright (c) 2002 Georg C. F. Greve <greve@gnu.org>,
+// all rights maintained by FSF Europe e.V.,
+// Villa Vogelsang, Antonienallee 1, 45279 Essen, Germany
+//
+
+// {{{ License, Contact, Notes & Includes
+
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// Contact:
+// Michael Brown <michaelb@opentext.com>
+//
+
+// Notes:
+//
+// The libmilter for sendmail works callback-oriented, so if you have no
+// experience with event-driven programming, the following may be hard for
+// you to understand.
+//
+// The code should be reasonably thread-safe. No guarantees, though.
+//
+// This program roughly does the following steps:
+//
+// 1. register filter with libmilter & set up socket
+// 2. register the callback functions defined in this file
+// -- wait for mail to show up --
+// 3. start spamc client
+// 4. assemble mail since libmilter passes it in pieces and put
+// these parts in the output pipe to spamc.
+// 5. when the mail is complete, close the pipe.
+// 6. read output from spamc, close input pipe and clean up PID
+// 7. check for the flags affected by SpamAssassin and set/change
+// them accordingly
+// 8. replace the body with the one provided by SpamAssassin if the
+// mail was rated spam, unless -m is specified
+// 9. free all temporary data
+// 10. tell sendmail to let the mail to go on (default) or be discarded
+// -- wait for mail to show up -- (restart at 3)
+//
+
+// Includes
+#include "config.h"
+
+#include <arpa/inet.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <sys/stat.h>
+#include <netinet/in.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <strings.h>
+#include <sysexits.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <syslog.h>
+#include <signal.h>
+#include <pthread.h>
+#ifdef HAVE_POLL_H
+#include <poll.h>
+#else
+#include "subst_poll.h"
+#endif
+#include <errno.h>
+
+// C++ includes
+#include <cstdio>
+#include <cstddef>
+#include <csignal>
+#include <string>
+#include <iostream>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "libmilter/mfapi.h"
+//#include "libmilter/mfdef.h"
+
+#if !HAVE_DECL_STRSEP
+char *strsep(char **stringp, const char *delim);
+#endif
+
+#if !HAVE_DECL_DAEMON
+int daemon(int nochdir, int noclose);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#include "spamass-milter.h"
+
+#ifdef WITH_DMALLOC
+#include "dmalloc.h"
+#endif
+
+#ifndef INADDR_LOOPBACK
+#define INADDR_LOOPBACK 0x7F000001
+#endif
+
+// }}}
+
+static const char Id[] = "$Id: spamass-milter.cpp,v 1.86 2005/02/05 07:03:22 dnelson Exp $";
+
+struct smfiDesc smfilter =
+ {
+ "SpamAssassin", // filter name
+ SMFI_VERSION, // version code -- leave untouched
+ SMFIF_ADDHDRS|SMFIF_CHGHDRS|SMFIF_CHGBODY, // flags
+ mlfi_connect, // info filter callback
+ mlfi_helo, // HELO filter callback
+ mlfi_envfrom, // envelope sender filter callback
+ mlfi_envrcpt, // envelope recipient filter callback
+ mlfi_header, // header filter callback
+ mlfi_eoh, // end of header callback
+ mlfi_body, // body filter callback
+ mlfi_eom, // end of message callback
+ mlfi_abort, // message aborted callback
+ mlfi_close, // connection cleanup callback
+ };
+
+const char *const debugstrings[] = {
+ "ALL", "FUNC", "POLL", "UORI", "STR", "MISC", "NET", "SPAMC", "RCPT",
+ "COPY",
+ NULL
+};
+
+int flag_debug = (1<<D_ALWAYS);
+bool flag_reject = false;
+int reject_score = -1;
+bool dontmodifyspam = false; // Don't modify/add body or spam results headers
+bool dontmodify = false; // Don't add SA headers, ever.
+bool flag_sniffuser = false;
+char *defaultuser; /* Username to send to spamc if there are multiple recipients */
+char *defaultdomain; /* Domain to append if incoming address has none */
+char *spamdhost;
+struct networklist ignorenets;
+int spamc_argc;
+char **spamc_argv;
+bool flag_bucket = false;
+bool flag_bucket_only = false;
+char *spambucket;
+bool flag_full_email = false; /* pass full email address to spamc */
+bool flag_expand = false; /* alias/virtusertable expansion */
+
+#if defined(__FreeBSD__) /* popen bug - see PR bin/50770 */
+static pthread_mutex_t popen_mutex = PTHREAD_MUTEX_INITIALIZER;
+#endif
+
+// {{{ main()
+
+int
+main(int argc, char* argv[])
+{
+ int c, err = 0;
+ const char *args = "fd:mMp:P:r:u:D:i:b:B:e:x";
+ char *sock = NULL;
+ bool dofork = false;
+ char *pidfilename = NULL;
+ FILE *pidfile = NULL;
+
+#ifdef HAVE_VERBOSE_TERMINATE_HANDLER
+ std::set_terminate (__gnu_cxx::__verbose_terminate_handler);
+#endif
+
+ openlog("spamass-milter", LOG_PID, LOG_MAIL);
+
+ /* Process command line options */
+ while ((c = getopt(argc, argv, args)) != -1) {
+ switch (c) {
+ case 'f':
+ dofork = true;
+ break;
+ case 'd':
+ parse_debuglevel(optarg);
+ break;
+ case 'D':
+ spamdhost = strdup(optarg);
+ break;
+ case 'e':
+ flag_full_email = true;
+ defaultdomain = strdup(optarg);
+ break;
+ case 'i':
+ debug(D_MISC, "Parsing ignore list");
+ parse_networklist(optarg, &ignorenets);
+ break;
+ case 'm':
+ dontmodifyspam = true;
+ smfilter.xxfi_flags &= ~SMFIF_CHGBODY;
+ break;
+ case 'M':
+ dontmodify = true;
+ dontmodifyspam = true;
+ smfilter.xxfi_flags &= ~(SMFIF_CHGBODY|SMFIF_CHGHDRS);
+ break;
+ case 'p':
+ sock = strdup(optarg);
+ break;
+ case 'P':
+ pidfilename = strdup(optarg);
+ break;
+ case 'r':
+ flag_reject = true;
+ reject_score = atoi(optarg);
+ break;
+ case 'u':
+ flag_sniffuser = true;
+ defaultuser = strdup(optarg);
+ break;
+ case 'b':
+ case 'B':
+ if (flag_bucket)
+ {
+ fprintf(stderr, "Can only have one -b or -B flag\n");
+ err = 1;
+ break;
+ }
+ flag_bucket = true;
+ if (c == 'b')
+ {
+ flag_bucket_only = true;
+ smfilter.xxfi_flags |= SMFIF_DELRCPT; // May delete recipients
+ }
+ // we will modify the recipient list; if spamc returns
+ // indicating that this mail is spam, the message will be
+ // sent to <optarg>@localhost
+ smfilter.xxfi_flags |= SMFIF_ADDRCPT; // May add recipients
+ // XXX we should probably verify that optarg is vaguely sane
+ spambucket = strdup( optarg );
+ break;
+ case 'x':
+ flag_expand = true;
+ break;
+ case '?':
+ err = 1;
+ break;
+ }
+ }
+
+ if (flag_full_email && !flag_sniffuser)
+ {
+ fprintf(stderr, "-e flag requires -u\n");
+ err=1;
+ }
+
+ /* remember the remainer of the arguments so we can pass them to spamc */
+ spamc_argc = argc - optind;
+ spamc_argv = argv + optind;
+
+ if (!sock || err) {
+ cout << PACKAGE_NAME << " - Version " << PACKAGE_VERSION << endl;
+ cout << "SpamAssassin Sendmail Milter Plugin" << endl;
+ cout << "Usage: spamass-milter -p socket [-b|-B bucket] [-d xx[,yy...]] [-D host]" << endl;
+ cout << " [-e defaultdomain] [-f] [-i networks] [-m] [-M]" << endl;
+ cout << " [-P pidfile] [-r nn] [-u defaultuser] [-x]" << endl;
+ cout << " [-- spamc args ]" << endl;
+ cout << " -p socket: path to create socket" << endl;
+ cout << " -b bucket: redirect spam to this mail address. The orignal" << endl;
+ cout << " recipient(s) will not receive anything." << endl;
+ cout << " -B bucket: add this mail address as a BCC recipient of spam." << endl;
+ cout << " -d xx[,yy ...]: set debug flags. Logs to syslog" << endl;
+ cout << " -D host: connect to spamd at remote host (deprecated)" << endl;
+ cout << " -e defaultdomain: pass full email address to spamc instead of just\n"
+ " username. Uses 'defaultdomain' if there was none" << endl;
+ cout << " -f: fork into background" << endl;
+ cout << " -i: skip (ignore) checks from these IPs or netblocks" << endl;
+ cout << " example: -i 192.168.12.5,10.0.0.0/8,172.16/255.255.0.0" << endl;
+ cout << " -m: don't modify body, Content-type: or Subject:" << endl;
+ cout << " -M: don't modify the message at all" << endl;
+ cout << " -P pidfile: Put processid in pidfile" << endl;
+ cout << " -r nn: reject messages with a score >= nn with an SMTP error.\n"
+ " use -1 to reject any messages tagged by SA." << endl;
+ cout << " -u defaultuser: pass the recipient's username to spamc.\n"
+ " Uses 'defaultuser' if there are multiple recipients." << endl;
+ cout << " -x: pass email address through alias and virtusertable expansion." << endl;
+ cout << " -- spamc args: pass the remaining flags to spamc." << endl;
+
+ exit(EX_USAGE);
+ }
+
+ if (pidfilename)
+ {
+ unlink(pidfilename);
+ pidfile = fopen(pidfilename,"w");
+ if (!pidfile)
+ {
+ fprintf(stderr, "Could not open pidfile: %s\n", strerror(errno));
+ exit(1);
+ }
+ /* leave the file open through the fork, since we don't know our pid
+ yet
+ */
+ }
+
+
+ if (dofork == true)
+ {
+ if (daemon(0, 0) == -1)
+ {
+ fprintf(stderr, "daemon() failed: %s\n", strerror(errno));
+ exit(1);
+ }
+ }
+
+ if (pidfile)
+ {
+ fprintf(pidfile, "%ld\n", (long)getpid());
+ fclose(pidfile);
+ pidfile = NULL;
+ }
+
+ {
+ struct stat junk;
+ if (stat(sock,&junk) == 0) unlink(sock);
+ }
+
+ (void) smfi_setconn(sock);
+ if (smfi_register(smfilter) == MI_FAILURE) {
+ fprintf(stderr, "smfi_register failed\n");
+ exit(EX_UNAVAILABLE);
+ } else {
+ debug(D_MISC, "smfi_register succeeded");
+ }
+ debug(D_ALWAYS, "spamass-milter %s starting", PACKAGE_VERSION);
+ err = smfi_main();
+ debug(D_ALWAYS, "spamass-milter %s exiting", PACKAGE_VERSION);
+ if (pidfilename)
+ unlink(pidfilename);
+ return err;
+}
+
+// }}}
+
+/* Update a header if SA changes it, or add it if it is new. */
+void update_or_insert(SpamAssassin* assassin, SMFICTX* ctx, string oldstring, t_setter setter, char *header )
+{
+ string::size_type eoh1 = assassin->d().find("\n\n");
+ string::size_type eoh2 = assassin->d().find("\n\r\n");
+ string::size_type eoh = ( eoh1 < eoh2 ? eoh1 : eoh2 );
+
+ string newstring;
+ string::size_type oldsize;
+
+ debug(D_UORI, "u_or_i: looking at <%s>", header);
+ debug(D_UORI, "u_or_i: oldstring: <%s>", oldstring.c_str());
+
+ newstring = retrieve_field(assassin->d().substr(0, eoh), header);
+ debug(D_UORI, "u_or_i: newstring: <%s>", newstring.c_str());
+
+ oldsize = callsetter(*assassin,setter)(newstring);
+
+ if (!dontmodify)
+ {
+ if (newstring != oldstring)
+ {
+ /* change if old one was present, append if non-null */
+ char* cstr = const_cast<char*>(newstring.c_str());
+ if (oldsize > 0)
+ {
+ debug(D_UORI, "u_or_i: changing");
+ smfi_chgheader(ctx, header, 1, newstring.size() > 0 ?
+ cstr : NULL );
+ } else if (newstring.size() > 0)
+ {
+ debug(D_UORI, "u_or_i: inserting");
+ smfi_addheader(ctx, header, cstr);
+ }
+ } else
+ {
+ debug(D_UORI, "u_or_i: no change");
+ }
+ }
+}
+
+// {{{ Assassinate
+
+//
+// implement the changes suggested by SpamAssassin for the mail. Returns
+// the milter error code.
+int
+assassinate(SMFICTX* ctx, SpamAssassin* assassin)
+{
+ // find end of header (eol in last line of header)
+ // and beginning of body
+ string::size_type eoh1 = assassin->d().find("\n\n");
+ string::size_type eoh2 = assassin->d().find("\n\r\n");
+ string::size_type eoh = (eoh1 < eoh2) ? eoh1 : eoh2;
+ string::size_type bob = assassin->d().find_first_not_of("\r\n", eoh);
+
+ if (bob == string::npos)
+ bob = assassin->d().size();
+
+ update_or_insert(assassin, ctx, assassin->spam_flag(), &SpamAssassin::set_spam_flag, "X-Spam-Flag");
+ update_or_insert(assassin, ctx, assassin->spam_status(), &SpamAssassin::set_spam_status, "X-Spam-Status");
+
+ /* Summarily reject the message if SA tagged it, or if we have a minimum
+ score, reject if it exceeds that score. */
+ if (flag_reject)
+ {
+ bool do_reject = false;
+ if (reject_score == -1 && !assassin->spam_flag().empty())
+ do_reject = true;
+ if (reject_score != -1)
+ {
+ int score, rv;
+ const char *spam_status = assassin->spam_status().c_str();
+ /* SA 3.0 uses the keyword "score" */
+ rv = sscanf(spam_status,"%*s score=%d", &score);
+ if (rv != 1)
+ {
+ /* SA 2.x uses the keyword "hits" */
+ rv = sscanf(spam_status,"%*s hits=%d", &score);
+ }
+ if (rv != 1)
+ debug(D_ALWAYS, "Could not extract score from <%s>", spam_status);
+ else
+ {
+ debug(D_MISC, "SA score: %d", score);
+ if (score >= reject_score)
+ do_reject = true;
+ }
+ }
+ if (do_reject)
+ {
+ debug(D_MISC, "Rejecting");
+ smfi_setreply(ctx, "550", "5.7.1", "Blocked by SpamAssassin");
+
+
+ if (flag_bucket)
+ {
+ /* If we also want a copy of the spam, shell out to sendmail and
+ send another copy. The milter API will not let you send the
+ message AND return a failure code to the sender, so this is
+ the only way to do it. */
+#if defined(__FreeBSD__)
+ int rv;
+#endif
+
+#if defined(HAVE_ASPRINTF)
+ char *buf;
+#else
+ char buf[1024];
+#endif
+ char *fmt="%s \"%s\"";
+ FILE *p;
+
+#if defined(HAVE_ASPRINTF)
+ asprintf(&buf, fmt, SENDMAIL, spambucket);
+#else
+#if defined(HAVE_SNPRINTF)
+ snprintf(buf, sizeof(buf)-1, fmt, SENDMAIL, spambucket);
+#else
+ /* XXX possible buffer overflow here */
+ sprintf(buf, fmt, SENDMAIL, spambucket);
+#endif
+#endif
+
+ debug(D_COPY, "calling %s", buf);
+#if defined(__FreeBSD__) /* popen bug - see PR bin/50770 */
+ rv = pthread_mutex_lock(&popen_mutex);
+ if (rv)
+ {
+ debug(D_ALWAYS, "Could not lock popen mutex: %s", strerror(rv));
+ abort();
+ }
+#endif
+ p = popen(buf, "w");
+ if (!p)
+ {
+ debug(D_COPY, "popen failed(%s). Will not send a copy to spambucket", strerror(errno));
+ } else
+ {
+ // Send message provided by SpamAssassin
+ fwrite(assassin->d().c_str(), assassin->d().size(), 1, p);
+ pclose(p); p = NULL;
+ }
+#if defined(__FreeBSD__)
+ rv = pthread_mutex_unlock(&popen_mutex);
+ if (rv)
+ {
+ debug(D_ALWAYS, "Could not unlock popen mutex: %s", strerror(rv));
+ abort();
+ }
+#endif
+#if defined(HAVE_ASPRINTF)
+ free(buf);
+#endif
+ }
+ return SMFIS_REJECT;
+ }
+ }
+
+ /* Drop the message into the spam bucket if it's spam */
+ if ( flag_bucket ) {
+ if (!assassin->spam_flag().empty()) {
+ // first, add the spambucket address
+ if ( smfi_addrcpt( ctx, spambucket ) != MI_SUCCESS ) {
+ throw string( "Failed to add spambucket to recipients" );
+ }
+ if (flag_bucket_only) {
+ // Move recipients to a non-active header, one at a
+ // time. Note, this may generate multiple X-Spam-Orig-To
+ // headers, but that's okay.
+ while( !assassin->recipients.empty()) {
+ if ( smfi_addheader( ctx, "X-Spam-Orig-To", (char *)assassin->recipients.front().c_str()) != MI_SUCCESS ) {
+ throw string( "Failed to save recipient" );
+ }
+
+ // It's not 100% important that this succeeds, so we'll just warn on failure rather than bailing out.
+ if ( smfi_delrcpt( ctx, (char *)assassin->recipients.front().c_str()) != MI_SUCCESS ) {
+ // throw_error really just logs a warning as opposed to actually throw()ing
+ debug(D_ALWAYS, "Failed to remove recipient %s from the envelope", assassin->recipients.front().c_str() );
+ }
+ assassin->recipients.pop_front();
+ }
+ }
+ }
+ }
+
+ update_or_insert(assassin, ctx, assassin->spam_report(), &SpamAssassin::set_spam_report, "X-Spam-Report");
+ update_or_insert(assassin, ctx, assassin->spam_prev_content_type(), &SpamAssassin::set_spam_prev_content_type, "X-Spam-Prev-Content-Type");
+ update_or_insert(assassin, ctx, assassin->spam_level(), &SpamAssassin::set_spam_level, "X-Spam-Level");
+ update_or_insert(assassin, ctx, assassin->spam_checker_version(), &SpamAssassin::set_spam_checker_version, "X-Spam-Checker-Version");
+
+ //
+ // If SpamAssassin thinks it is spam, replace
+ // Subject:
+ // Content-Type:
+ // <Body>
+ //
+ // However, only issue the header replacement calls if the content has
+ // actually changed. If SA didn't change subject or content-type, don't
+ // replace here unnecessarily.
+ if (!dontmodifyspam && assassin->spam_flag().size()>0)
+ {
+ update_or_insert(assassin, ctx, assassin->subject(), &SpamAssassin::set_subject, "Subject");
+ update_or_insert(assassin, ctx, assassin->content_type(), &SpamAssassin::set_content_type, "Content-Type");
+
+ // Replace body with the one SpamAssassin provided
+ string::size_type body_size = assassin->d().size() - bob;
+ string body=assassin->d().substr(bob, string::npos);
+ if ( smfi_replacebody(ctx, (unsigned char *)body.c_str(), body_size) == MI_FAILURE )
+ throw string("error. could not replace body.");
+
+ }
+
+ return SMFIS_CONTINUE;
+}
+
+// retrieve the content of a specific field in the header
+// and return it.
+string
+old_retrieve_field(const string& header, const string& field)
+{
+ // look for beginning of content
+ string::size_type pos = find_nocase(header, "\n" + field + ": ");
+
+ // return empty string if not found
+ if (pos == string::npos)
+ {
+ debug(D_STR, "r_f: failed");
+ return string("");
+ }
+
+ // look for end of field name
+ pos = find_nocase(header, " ", pos) + 1;
+
+ string::size_type pos2(pos);
+
+ // is field empty?
+ if (pos2 == find_nocase(header, "\n", pos2))
+ return string("");
+
+ // look for end of content
+ do {
+
+ pos2 = find_nocase(header, "\n", pos2+1);
+
+ }
+ while ( pos2 < string::npos &&
+ isspace(header[pos2+1]) );
+
+ return header.substr(pos, pos2-pos);
+
+}
+
+// retrieve the content of a specific field in the header
+// and return it.
+string
+retrieve_field(const string& header, const string& field)
+{
+ // Find the field
+ string::size_type field_start = string::npos;
+ string::size_type field_end = string::npos;
+ string::size_type idx = 0;
+
+ while( field_start == string::npos ) {
+ idx = find_nocase( header, field + ":", idx );
+
+ // no match
+ if ( idx == string::npos ) {
+ return string( "" );
+ }
+
+ // The string we've found needs to be either at the start of the
+ // headers string, or immediately following a "\n"
+ if ( idx != 0 ) {
+ if ( header[ idx - 1 ] != '\n' ) {
+ idx++; // so we don't get stuck in an infinite loop
+ continue; // loop around again
+ }
+ }
+
+ field_start = idx;
+ }
+
+ // A mail field starts just after the header. Ideally, there's a
+ // space, but it's possible that there isn't.
+ field_start += field.length() + 1;
+ if ( field_start < ( header.length() - 1 ) && header[ field_start ] == ' ' ) {
+ field_start++;
+ }
+
+ // See if there's anything left, to shortcut the rest of the
+ // function.
+ if ( field_start == header.length() - 1 ) {
+ return string( "" );
+ }
+
+ // The field continues to the end of line. If the start of the next
+ // line is whitespace, then the field continues.
+ idx = field_start;
+ while( field_end == string::npos ) {
+ idx = header.find( "\n", idx );
+
+ // if we don't find a "\n", gobble everything to the end of the headers
+ if ( idx == string::npos ) {
+ field_end = header.length();
+ } else {
+ // check the next character
+ if (( idx + 1 ) < header.length() && ( isspace( header[ idx + 1 ] ))) {
+ idx ++; // whitespace found, so wrap to the next line
+ } else {
+ field_end = idx;
+ }
+ }
+ }
+
+ /* if the header line ends in \r\n, don't return the \r */
+ if (header[field_end-1] == '\r')
+ field_end--;
+
+ // Maybe remove the whitespace picked up when a header wraps - this
+ // might actually be a requirement
+ return header.substr( field_start, field_end - field_start );
+}
+
+
+// }}}
+
+// {{{ MLFI callbacks
+
+//
+// Gets called once when a client connects to sendmail
+//
+// gets the originating IP address and checks it against the ignore list
+// if it isn't in the list, store the IP in a structure and store a
+// pointer to it in the private data area.
+//
+sfsistat
+mlfi_connect(SMFICTX * ctx, char *hostname, _SOCK_ADDR * hostaddr)
+{
+ struct context *sctx;
+
+ debug(D_FUNC, "mlfi_connect: enter");
+
+ /* allocate a structure to store the IP address (and SA object) in */
+ sctx = (struct context *)malloc(sizeof(*sctx));
+ if (!hostaddr)
+ {
+ /* not a socket; probably a local user calling sendmail directly */
+ /* set to 127.0.0.1 */
+ sctx->connect_ip.s_addr = htonl(INADDR_LOOPBACK);
+ } else
+ {
+ sctx->connect_ip = ((struct sockaddr_in *) hostaddr)->sin_addr;
+ }
+ sctx->assassin = NULL;
+ sctx->helo = NULL;
+
+ /* store a pointer to it with setpriv */
+ smfi_setpriv(ctx, sctx);
+
+ if (ip_in_networklist(sctx->connect_ip, &ignorenets))
+ {
+ debug(D_NET, "%s is in our ignore list - accepting message",
+ inet_ntoa(sctx->connect_ip));
+ debug(D_FUNC, "mlfi_connect: exit ignore");
+ return SMFIS_ACCEPT;
+ }
+
+ // Tell Milter to continue
+ debug(D_FUNC, "mlfi_connect: exit");
+
+ return SMFIS_CONTINUE;
+}
+
+//
+// Gets called on every "HELO"
+//
+// stores the result in the context structure
+//
+sfsistat mlfi_helo(SMFICTX * ctx, char * helohost)
+{
+ struct context *sctx = (struct context*)smfi_getpriv(ctx);
+ if (sctx->helo)
+ free(sctx->helo);
+ sctx->helo = strdup(helohost);
+
+ return SMFIS_CONTINUE;
+}
+
+//
+// Gets called first for all messages
+//
+// creates SpamAssassin object and makes pointer to it
+// private data of this filter process
+//
+sfsistat
+mlfi_envfrom(SMFICTX* ctx, char** envfrom)
+{
+ SpamAssassin* assassin;
+ struct context *sctx = (struct context *)smfi_getpriv(ctx);
+ char *queueid;
+
+ debug(D_FUNC, "mlfi_envfrom: enter");
+ try {
+ // launch new SpamAssassin
+ assassin=new SpamAssassin;
+ } catch (string& problem)
+ {
+ throw_error(problem);
+ return SMFIS_TEMPFAIL;
+ };
+
+ assassin->set_connectip(string(inet_ntoa(sctx->connect_ip)));
+
+ // Store a pointer to the assassin object in our context struct
+ sctx->assassin = assassin;
+
+ // remember the MAIL FROM address
+ assassin->set_from(string(envfrom[0]));
+
+ queueid=smfi_getsymval(ctx,"i");
+ if (!queueid)
+ queueid="unk";
+ assassin->queueid = queueid;
+
+ debug(D_MISC, "queueid=%s", queueid);
+
+ // tell Milter to continue
+ debug(D_FUNC, "mlfi_envfrom: exit");
+
+ return SMFIS_CONTINUE;
+}
+
+//
+// Gets called once for each recipient
+//
+// stores the first recipient in the spamassassin object and
+// stores all addresses and the number thereof (some redundancy)
+//
+
+
+sfsistat
+mlfi_envrcpt(SMFICTX* ctx, char** envrcpt)
+{
+ struct context *sctx = (struct context*)smfi_getpriv(ctx);
+ SpamAssassin* assassin = sctx->assassin;
+ FILE *p;
+#if defined(__FreeBSD__)
+ int rv;
+#endif
+
+ debug(D_FUNC, "mlfi_envrcpt: enter");
+
+ if (flag_expand)
+ {
+ /* open a pipe to sendmail so we can do address expansion */
+
+ char buf[1024];
+ char *fmt="%s -bv \"%s\" 2>&1";
+
+#if defined(HAVE_SNPRINTF)
+ snprintf(buf, sizeof(buf)-1, fmt, SENDMAIL, envrcpt[0]);
+#else
+ /* XXX possible buffer overflow here */
+ sprintf(buf, fmt, SENDMAIL, envrcpt[0]);
+#endif
+
+ debug(D_RCPT, "calling %s", buf);
+
+#if defined(__FreeBSD__) /* popen bug - see PR bin/50770 */
+ rv = pthread_mutex_lock(&popen_mutex);
+ if (rv)
+ {
+ debug(D_ALWAYS, "Could not lock popen mutex: %s", strerror(rv));
+ abort();
+ }
+#endif
+
+ p = popen(buf, "r");
+ if (!p)
+ {
+ debug(D_RCPT, "popen failed(%s). Will not expand aliases", strerror(errno));
+ assassin->expandedrcpt.push_back(envrcpt[0]);
+ } else
+ {
+ while (fgets(buf, sizeof(buf), p) != NULL)
+ {
+ int i = strlen(buf);
+ /* strip trailing EOLs */
+ while (i > 0 && buf[i - 1] <= ' ')
+ i--;
+ buf[i] = '\0';
+ debug(D_RCPT, "sendmail output: %s", buf);
+ /* From a quick scan of the sendmail source, a valid email
+ address gets printed via either
+ "deliverable: mailer %s, host %s, user %s"
+ or "deliverable: mailer %s, user %s"
+ */
+ if (strstr(buf, "... deliverable: mailer "))
+ {
+ char *p=strstr(buf,", user ");
+ /* anything after ", user " is the email address */
+ debug(D_RCPT, "user: %s", p+7);
+ assassin->expandedrcpt.push_back(p+7);
+ }
+ }
+ pclose(p); p = NULL;
+ }
+#if defined(__FreeBSD__)
+ rv = pthread_mutex_unlock(&popen_mutex);
+ if (rv)
+ {
+ debug(D_ALWAYS, "Could not unlock popen mutex: %s", strerror(rv));
+ abort();
+ }
+#endif
+ } else
+ {
+ assassin->expandedrcpt.push_back(envrcpt[0]);
+ }
+ debug(D_RCPT, "Total of %d actual recipients", (int)assassin->expandedrcpt.size());
+
+ if (assassin->numrcpt() == 0)
+ {
+ /* Send the envelope headers as X-Envelope-From: and
+ X-Envelope-To: so that SpamAssassin can use them in its
+ whitelist checks. Also forge as complete a dummy
+ Received: header as possible because SA gets a lot of
+ info from it.
+
+ HReceived: $?sfrom $s $.$?_($?s$|from $.$_)
+ $.$?{auth_type}(authenticated$?{auth_ssf} bits=${auth_ssf}$.)
+ $.by $j ($v/$Z)$?r with $r$. id $i$?{tls_version}
+ (version=${tls_version} cipher=${cipher} bits=${cipher_bits} verify=${verify})$.$?u
+ for $u; $|;
+ $.$b$?g
+ (envelope-from $g)$.
+
+ */
+ const char *macro_b, *macro_s, *macro_j, *macro__;
+
+ /* Failure to fetch {b} is not fatal. Without this date SA can't do
+ future/past validation on the Date: header, but sendmail doesn't
+ default to allow milters to see it.
+ */
+ macro_b = smfi_getsymval(ctx, "b");
+
+ /* Sendmail currently cannot pass us the {s} macro, but
+ I do not know why. Leave this in for the day sendmail is
+ fixed. Until that day, use the value remembered by
+ mlfi_helo()
+ */
+ macro_s = smfi_getsymval(ctx, "s");
+ if (!macro_s)
+ macro_s = sctx->helo;
+ if (!macro_s)
+ macro_s = "nohelo";
+
+ /* FQDN of this site */
+ macro_j = smfi_getsymval(ctx, "j");
+ if (!macro_j)
+ macro_j = "localhost";
+
+ /* Sending site's address */
+ macro__ = smfi_getsymval(ctx, "_");
+ if (!macro__)
+ macro__ = "unknown";
+
+ assassin->output((string)"X-Envelope-From: "+assassin->from()+"\r\n");
+ assassin->output((string)"X-Envelope-To: "+envrcpt[0]+"\r\n");
+
+ if (!macro_b)
+ assassin->output((string)"Received: from "+macro_s+" ("+macro__+") by "+macro_j+";\r\n");
+ else
+ assassin->output((string)"Received: from "+macro_s+" ("+macro__+") by "+macro_j+"; "+macro_b+"\r\n");
+
+ } else
+ assassin->output((string)"X-Envelope-To: "+envrcpt[0]+"\r\n");
+
+ /* increment RCPT TO: count */
+ assassin->set_numrcpt();
+
+ /* If we expanded to at least one user and we haven't recorded one yet,
+ record the first one */
+ if (!assassin->expandedrcpt.empty() && (assassin->rcpt().size() == 0))
+ {
+ debug(D_RCPT, "remembering %s for spamc", assassin->expandedrcpt.front().c_str());
+ assassin->set_rcpt(assassin->expandedrcpt.front());
+ }
+
+ debug(D_RCPT, "remembering recipient %s", envrcpt[0]);
+ assassin->recipients.push_back( envrcpt[0] ); // XXX verify that this worked
+
+ debug(D_FUNC, "mlfi_envrcpt: exit");
+
+ return SMFIS_CONTINUE;
+}
+
+//
+// Gets called repeatedly for all header fields
+//
+// assembles the headers and passes them on to the SpamAssassin client
+// through the pipe.
+//
+// only exception: SpamAssassin header fields (X-Spam-*) get suppressed
+// but are being stored in the SpamAssassin element.
+//
+// this function also starts the connection with the SPAMC program the
+// first time it is called.
+//
+
+sfsistat
+mlfi_header(SMFICTX* ctx, char* headerf, char* headerv)
+{
+ SpamAssassin* assassin = ((struct context *)smfi_getpriv(ctx))->assassin;
+ debug(D_FUNC, "mlfi_header: enter");
+
+ // Check if the SPAMC program has already been run, if not we run it.
+ if ( !(assassin->connected) )
+ {
+ try {
+ assassin->connected = 1; // SPAMC is getting ready to run
+ assassin->Connect();
+ }
+ catch (string& problem) {
+ throw_error(problem);
+ ((struct context *)smfi_getpriv(ctx))->assassin=NULL;
+ delete assassin;
+ debug(D_FUNC, "mlfi_header: exit error connect");
+ return SMFIS_TEMPFAIL;
+ };
+ }
+
+ // Is it a "X-Spam-" header field?
+ if ( cmp_nocase_partial("X-Spam-", headerf) == 0 )
+ {
+ int suppress = 1;
+ // memorize content of old fields
+
+ if ( cmp_nocase_partial("X-Spam-Status", headerf) == 0 )
+ assassin->set_spam_status(headerv);
+ else if ( cmp_nocase_partial("X-Spam-Flag", headerf) == 0 )
+ assassin->set_spam_flag(headerv);
+ else if ( cmp_nocase_partial("X-Spam-Report", headerf) == 0 )
+ assassin->set_spam_report(headerv);
+ else if ( cmp_nocase_partial("X-Spam-Prev-Content-Type", headerf) == 0 )
+ assassin->set_spam_prev_content_type(headerv);
+ else if ( cmp_nocase_partial("X-Spam-Level", headerf) == 0 )
+ assassin->set_spam_level(headerv);
+ else if ( cmp_nocase_partial("X-Spam-Checker-Version", headerf) == 0 )
+ assassin->set_spam_checker_version(headerv);
+ else
+ {
+ /* Hm. X-Spam header, but not one we recognize. Pass it through. */
+ suppress = 0;
+ }
+
+ if (suppress)
+ {
+ debug(D_FUNC, "mlfi_header: suppress");
+ return SMFIS_CONTINUE;
+ }
+ }
+
+ // Content-Type: will be stored if present
+ if ( cmp_nocase_partial("Content-Type", headerf) == 0 )
+ assassin->set_content_type(headerv);
+
+ // Subject: should be stored
+ if ( cmp_nocase_partial("Subject", headerf) == 0 )
+ assassin->set_subject(headerv);
+
+ // assemble header to be written to SpamAssassin
+ string header = string(headerf) + ": " + headerv + "\r\n";
+
+ try {
+ // write to SpamAssassin client
+ assassin->output(header.c_str(),header.size());
+ } catch (string& problem)
+ {
+ throw_error(problem);
+ ((struct context *)smfi_getpriv(ctx))->assassin=NULL;
+ delete assassin;
+ debug(D_FUNC, "mlfi_header: exit error output");
+ return SMFIS_TEMPFAIL;
+ };
+
+ // go on...
+ debug(D_FUNC, "mlfi_header: exit");
+
+ return SMFIS_CONTINUE;
+}
+
+//
+// Gets called once when the header is finished.
+//
+// writes empty line to SpamAssassin client to separate
+// headers from body.
+//
+sfsistat
+mlfi_eoh(SMFICTX* ctx)
+{
+ SpamAssassin* assassin = ((struct context *)smfi_getpriv(ctx))->assassin;
+
+ debug(D_FUNC, "mlfi_eoh: enter");
+
+ // Check if the SPAMC program has already been run, if not we run it.
+ if ( !(assassin->connected) )
+ {
+ try {
+ assassin->connected = 1; // SPAMC is getting ready to run
+ assassin->Connect();
+ }
+ catch (string& problem) {
+ throw_error(problem);
+ ((struct context *)smfi_getpriv(ctx))->assassin=NULL;
+ delete assassin;
+
+ debug(D_FUNC, "mlfi_eoh: exit error connect");
+ return SMFIS_TEMPFAIL;
+ };
+ }
+
+ try {
+ // add blank line between header and body
+ assassin->output("\r\n",2);
+ } catch (string& problem)
+ {
+ throw_error(problem);
+ ((struct context *)smfi_getpriv(ctx))->assassin=NULL;
+ delete assassin;
+
+ debug(D_FUNC, "mlfi_eoh: exit error output");
+ return SMFIS_TEMPFAIL;
+ };
+
+ // go on...
+
+ debug(D_FUNC, "mlfi_eoh: exit");
+ return SMFIS_CONTINUE;
+}
+
+//
+// Gets called repeatedly to transmit the body
+//
+// writes everything directly to SpamAssassin client
+//
+sfsistat
+mlfi_body(SMFICTX* ctx, u_char *bodyp, size_t bodylen)
+{
+ debug(D_FUNC, "mlfi_body: enter");
+ SpamAssassin* assassin = ((struct context *)smfi_getpriv(ctx))->assassin;
+
+
+ try {
+ assassin->output(bodyp, bodylen);
+ } catch (string& problem)
+ {
+ throw_error(problem);
+ ((struct context *)smfi_getpriv(ctx))->assassin=NULL;
+ delete assassin;
+ debug(D_FUNC, "mlfi_body: exit error");
+ return SMFIS_TEMPFAIL;
+ };
+
+ // go on...
+ debug(D_FUNC, "mlfi_body: exit");
+ return SMFIS_CONTINUE;
+}
+
+//
+// Gets called once at the end of mail processing
+//
+// tells SpamAssassin client that the mail is complete
+// through EOF and then modifies the mail accordingly by
+// calling the "assassinate" function
+//
+sfsistat
+mlfi_eom(SMFICTX* ctx)
+{
+ SpamAssassin* assassin = ((struct context *)smfi_getpriv(ctx))->assassin;
+ int milter_status;
+
+ debug(D_FUNC, "mlfi_eom: enter");
+ try {
+
+ // close output pipe to signal EOF to SpamAssassin
+ assassin->close_output();
+
+ // read what the Assassin is telling us
+ assassin->input();
+
+ milter_status = assassinate(ctx, assassin);
+
+ // now cleanup the element.
+ ((struct context *)smfi_getpriv(ctx))->assassin=NULL;
+ delete assassin;
+
+ } catch (string& problem)
+ {
+ throw_error(problem);
+ ((struct context *)smfi_getpriv(ctx))->assassin=NULL;
+ delete assassin;
+ debug(D_FUNC, "mlfi_eom: exit error");
+ return SMFIS_TEMPFAIL;
+ };
+
+ // go on...
+ debug(D_FUNC, "mlfi_eom: exit");
+ return milter_status;
+}
+
+//
+// Gets called on session-basis. This keeps things nice & quiet.
+//
+sfsistat
+mlfi_close(SMFICTX* ctx)
+{
+ struct context *sctx;
+ debug(D_FUNC, "mlfi_close");
+
+ sctx = (struct context*)smfi_getpriv(ctx);
+ if (sctx == NULL)
+ {
+ /* the context should have been set in mlfi_connect */
+ debug(D_ALWAYS, "NULL context in mlfi_close! Should not happen!");
+ return SMFIS_ACCEPT;
+ }
+ if (sctx->helo)
+ free(sctx->helo);
+ free(sctx);
+ smfi_setpriv(ctx, NULL);
+
+ return SMFIS_ACCEPT;
+}
+
+//
+// Gets called when things are being aborted.
+//
+// kills the SpamAssassin object, its destructor should
+// take care of everything.
+//
+sfsistat
+mlfi_abort(SMFICTX* ctx)
+{
+ SpamAssassin* assassin = ((struct context *)smfi_getpriv(ctx))->assassin;
+
+ debug(D_FUNC, "mlfi_abort");
+ ((struct context *)smfi_getpriv(ctx))->assassin=NULL;
+ delete assassin;
+
+ return SMFIS_ACCEPT;
+}
+
+// }}}
+
+// {{{ SpamAssassin Class
+
+//
+// This is a new constructor for the SpamAssassin object. It simply
+// initializes two variables. The original constructor has been
+// renamed to Connect().
+//
+SpamAssassin::SpamAssassin():
+ error(false),
+ running(false),
+ connected(false),
+ _numrcpt(0)
+{
+}
+
+
+SpamAssassin::~SpamAssassin()
+{
+ if (connected)
+ {
+ // close all pipes that are still open
+ if (pipe_io[0][0] > -1) close(pipe_io[0][0]);
+ if (pipe_io[0][1] > -1) close(pipe_io[0][1]);
+ if (pipe_io[1][0] > -1) close(pipe_io[1][0]);
+ if (pipe_io[1][1] > -1) close(pipe_io[1][1]);
+
+ // child still running?
+ if (running)
+ {
+ // make sure the pid is valid
+ if (pid > 0) {
+ // slaughter child
+ kill(pid, SIGKILL);
+
+ // wait for child to terminate
+ int status;
+ waitpid(pid, &status, 0);
+ }
+ }
+ }
+
+ // Clean up the recip list. Might be overkill, but it's good housekeeping.
+ while( !recipients.empty())
+ {
+ recipients.pop_front();
+ }
+ // Clean up the recip list. Might be overkill, but it's good housekeeping.
+ while( !expandedrcpt.empty())
+ {
+ expandedrcpt.pop_front();
+ }
+}
+
+//
+// This is the old SpamAssassin constructor. It has been renamed Connect(),
+// and is now called at the beginning of the mlfi_header() function.
+//
+
+void SpamAssassin::Connect()
+{
+ // set up pipes for in- and output
+ if (pipe(pipe_io[0]))
+ throw string(string("pipe error: ")+string(strerror(errno)));
+ if (pipe(pipe_io[1]))
+ throw string(string("pipe error: ")+string(strerror(errno)));
+
+ // now execute SpamAssassin client for contact with SpamAssassin spamd
+
+ // start child process
+ switch(pid = fork())
+ {
+ case -1:
+ // forking trouble. throw error.
+ throw string(string("fork error: ")+string(strerror(errno)));
+ break;
+ case 0:
+ // +++ CHILD +++
+
+ // close unused pipes
+ close(pipe_io[1][0]);
+ close(pipe_io[0][1]);
+
+ // redirect stdin(0), stdout(1) and stderr(2)
+ dup2(pipe_io[0][0],0);
+ dup2(pipe_io[1][1],1);
+ dup2(pipe_io[1][1],2);
+
+ closeall(3);
+
+ // execute spamc
+ // absolute path (determined in autoconf)
+ // should be a little more secure
+ // XXX arbitrary 100-argument max
+ int argc = 0;
+ char** argv = (char**) malloc(100*sizeof(char*));
+ argv[argc++] = SPAMC;
+ if (flag_sniffuser)
+ {
+ argv[argc++] = "-u";
+ if ( expandedrcpt.size() != 1 )
+ {
+ // More (or less?) than one recipient, so we pass the default
+ // username to SPAMC. This way special rules can be defined for
+ // multi recipient messages.
+ debug(D_RCPT, "%d recipients; spamc gets default username %s", (int)expandedrcpt.size(), defaultuser);
+ argv[argc++] = defaultuser;
+ } else
+ {
+ // There is only 1 recipient so we pass the username
+ // (converted to lowercase) to SPAMC. Don't worry about
+ // freeing this memory as we're exec()ing anyhow.
+ if (flag_full_email)
+ argv[argc] = strlwr(strdup(full_user().c_str()));
+ else
+ argv[argc] = strlwr(strdup(local_user().c_str()));
+
+ debug(D_RCPT, "spamc gets %s", argv[argc]);
+
+ argc++;
+ }
+ }
+ if (spamdhost)
+ {
+ argv[argc++] = "-d";
+ argv[argc++] = spamdhost;
+ }
+ if (spamc_argc)
+ {
+ memcpy(argv+argc, spamc_argv, spamc_argc * sizeof(char *));
+ argc += spamc_argc;
+ }
+ argv[argc++] = 0;
+
+ execvp(argv[0] , argv); // does not return!
+
+ // execution failed
+ throw_error(string("execution error: ")+string(strerror(errno)));
+ _exit(1);
+ break;
+ }
+
+ // +++ PARENT +++
+
+ // close unused pipes
+ close(pipe_io[0][0]);
+ close(pipe_io[1][1]);
+ pipe_io[0][0]=-1;
+ pipe_io[1][1]=-1;
+
+ // mark the pipes non-blocking
+ if(fcntl(pipe_io[0][1], F_SETFL, O_NONBLOCK) == -1)
+ throw string(string("Cannot set pipe01 nonblocking: ")+string(strerror(errno)));
+#if 0 /* don't really need to make the sink pipe nonblocking */
+ if(fcntl(pipe_io[1][0], F_SETFL, O_NONBLOCK) == -1)
+ throw string(string("Cannot set pipe10 nonblocking: ")+string(strerror(errno)));
+#endif
+
+ // we have to assume the client is running now.
+ running=true;
+
+ /* If we have any buffered output, write it now. */
+ if (outputbuffer.size())
+ {
+ output(outputbuffer);
+ outputbuffer="";
+ }
+}
+
+// write to SpamAssassin
+void
+SpamAssassin::output(const void* buffer, long size)
+{
+ debug(D_FUNC, "::output enter");
+
+ debug(D_SPAMC, "output \"%*.*s\"", (int)size, (int)size, (char *)buffer);
+
+ // if there are problems, fail.
+ if (error)
+ throw string("tried output despite problems. failed.");
+
+ /* If we haven't launched spamc yet, just store the data */
+ if (!connected)
+ {
+ /* Silly C++ can't tell the difference between
+ (const char*, string::size_type) and
+ (string::size_type, char), so we have to cast the parameters.
+ */
+ outputbuffer.append((const char *)buffer,(string::size_type)size);
+ debug(D_FUNC, "::output exit1");
+ return;
+ }
+
+ // send to SpamAssassin
+ long total = 0;
+ long wsize = 0;
+ string reason;
+ int status;
+ do {
+ struct pollfd fds[2];
+ int nfds = 2, nready;
+ fds[0].fd = pipe_io[0][1];
+ fds[0].events = POLLOUT;
+ fds[1].fd = pipe_io[1][0];
+ fds[1].events = POLLIN;
+
+ debug(D_POLL, "polling fds %d and %d", pipe_io[0][1], pipe_io[1][0]);
+ nready = poll(fds, nfds, 1000);
+ if (nready == -1)
+ throw("poll failed");
+
+ debug(D_POLL, "poll returned %d, fd0=%d, fd1=%d", nready, fds[0].revents, fds[1].revents);
+
+ if (fds[1].revents & (POLLERR|POLLNVAL|POLLHUP))
+ {
+ throw string("poll says my read pipe is busted");
+ }
+
+ if (fds[0].revents & (POLLERR|POLLNVAL|POLLHUP))
+ {
+ throw string("poll says my write pipe is busted");
+ }
+
+ if (fds[1].revents & POLLIN)
+ {
+ debug(D_POLL, "poll says I can read");
+ read_pipe();
+ }
+
+ if (fds[0].revents & POLLOUT)
+ {
+ debug(D_POLL, "poll says I can write");
+ switch(wsize = write(pipe_io[0][1], (char *)buffer + total, size - total))
+ {
+ case -1:
+ if (errno == EAGAIN)
+ continue;
+ reason = string(strerror(errno));
+
+ // close the pipes
+ close(pipe_io[0][1]);
+ close(pipe_io[1][0]);
+ pipe_io[0][1]=-1;
+ pipe_io[1][0]=-1;
+
+ // Slaughter child
+ kill(pid, SIGKILL);
+
+ // set flags
+ error = true;
+ running = false;
+
+ // wait until child is dead
+ waitpid(pid, &status, 0);
+
+ throw string(string("write error: ")+reason);
+ break;
+ default:
+ total += wsize;
+ debug(D_POLL, "wrote %ld bytes", wsize);
+ break;
+ }
+ }
+ } while ( total < size );
+
+ debug(D_FUNC, "::output exit2");
+}
+
+void SpamAssassin::output(const void* buffer)
+{
+ output(buffer, strlen((const char *)buffer));
+}
+
+void SpamAssassin::output(string buffer)
+{
+ output(buffer.c_str(), buffer.size());
+}
+
+// close output pipe
+void
+SpamAssassin::close_output()
+{
+ if(close(pipe_io[0][1]))
+ throw string(string("close error: ")+string(strerror(errno)));
+ pipe_io[0][1]=-1;
+}
+
+void
+SpamAssassin::input()
+{
+ debug(D_FUNC, "::input enter");
+ // if the child has exited or we experienced an error, return
+ // immediately.
+ if (!running || error)
+ {
+ debug(D_FUNC, "::input exit1");
+ return;
+ }
+
+ // keep reading from input pipe until it is empty
+ empty_and_close_pipe();
+
+ // that's it, we're through
+ running = false;
+
+ // wait until child is dead
+ int status;
+ if(waitpid(pid, &status, 0)<0)
+ {
+ error = true;
+ throw string(string("waitpid error: ")+string(strerror(errno)));
+ };
+ debug(D_FUNC, "::input exit2");
+}
+
+//
+// return reference to mail
+//
+string&
+SpamAssassin::d()
+{
+ return mail;
+}
+
+//
+// get values of the different SpamAssassin fields
+//
+string&
+SpamAssassin::spam_status()
+{
+ return x_spam_status;
+}
+
+string&
+SpamAssassin::spam_flag()
+{
+ return x_spam_flag;
+}
+
+string&
+SpamAssassin::spam_report()
+{
+ return x_spam_report;
+}
+
+string&
+SpamAssassin::spam_prev_content_type()
+{
+ return x_spam_prev_content_type;
+}
+
+string&
+SpamAssassin::spam_checker_version()
+{
+ return x_spam_checker_version;
+}
+
+string&
+SpamAssassin::spam_level()
+{
+ return x_spam_level;
+}
+
+string&
+SpamAssassin::content_type()
+{
+ return _content_type;
+}
+
+string&
+SpamAssassin::subject()
+{
+ return _subject;
+}
+
+string&
+SpamAssassin::rcpt()
+{
+ return _rcpt;
+}
+
+string&
+SpamAssassin::from()
+{
+ return _from;
+}
+
+string&
+SpamAssassin::connectip()
+{
+ return _connectip;
+}
+
+
+string
+SpamAssassin::local_user()
+{
+ // assuming we have a recipient in the form: <username@somehost.somedomain>
+ // (angle brackets optional) we return 'username'
+ if (_rcpt[0] == '<')
+ return _rcpt.substr(1, _rcpt.find_first_of("@+")-1);
+ else
+ return _rcpt.substr(0, _rcpt.find_first_of("@+"));
+}
+
+string
+SpamAssassin::full_user()
+{
+ string name;
+ // assuming we have a recipient in the form: <username@somehost.somedomain>
+ // (angle brackets optional) we return 'username@somehost.somedomain'
+ if (_rcpt[0] == '<')
+ name = _rcpt.substr(1, _rcpt.find('>')-1);
+ else
+ name = _rcpt;
+ if(name.find('@') == string::npos)
+ {
+ /* if the name had no domain part (local delivery), append the default one */
+ name = name + "@" + defaultdomain;
+ }
+ return name;
+}
+
+int
+SpamAssassin::numrcpt()
+{
+ return _numrcpt;
+}
+
+int
+SpamAssassin::set_numrcpt()
+{
+ _numrcpt++;
+ return _numrcpt;
+}
+
+int
+SpamAssassin::set_numrcpt(const int val)
+{
+ _numrcpt = val;
+ return _numrcpt;
+}
+
+//
+// set the values of the different SpamAssassin
+// fields in our element. Returns former size of field
+//
+string::size_type
+SpamAssassin::set_spam_status(const string& val)
+{
+ string::size_type old = x_spam_status.size();
+ x_spam_status = val;
+ return (old);
+}
+
+string::size_type
+SpamAssassin::set_spam_flag(const string& val)
+{
+ string::size_type old = x_spam_flag.size();
+ x_spam_flag = val;
+ return (old);
+}
+
+string::size_type
+SpamAssassin::set_spam_report(const string& val)
+{
+ string::size_type old = x_spam_report.size();
+ x_spam_report = val;
+ return (old);
+}
+
+string::size_type
+SpamAssassin::set_spam_prev_content_type(const string& val)
+{
+ string::size_type old = x_spam_prev_content_type.size();
+ x_spam_prev_content_type = val;
+ return (old);
+}
+
+string::size_type
+SpamAssassin::set_spam_checker_version(const string& val)
+{
+ string::size_type old = x_spam_checker_version.size();
+ x_spam_checker_version = val;
+ return (old);
+}
+
+string::size_type
+SpamAssassin::set_spam_level(const string& val)
+{
+ string::size_type old = x_spam_level.size();
+ x_spam_level = val;
+ return (old);
+}
+
+string::size_type
+SpamAssassin::set_content_type(const string& val)
+{
+ string::size_type old = _content_type.size();
+ _content_type = val;
+ return (old);
+}
+
+string::size_type
+SpamAssassin::set_subject(const string& val)
+{
+ string::size_type old = _subject.size();
+ _subject = val;
+ return (old);
+}
+
+string::size_type
+SpamAssassin::set_rcpt(const string& val)
+{
+ string::size_type old = _rcpt.size();
+ _rcpt = val;
+ return (old);
+}
+
+string::size_type
+SpamAssassin::set_from(const string& val)
+{
+ string::size_type old = _from.size();
+ _from = val;
+ return (old);
+}
+
+string::size_type
+SpamAssassin::set_connectip(const string& val)
+{
+ string::size_type old = _connectip.size();
+ _connectip = val;
+ return (old);
+}
+
+//
+// Read available output from SpamAssassin client
+//
+int
+SpamAssassin::read_pipe()
+{
+ long size;
+ int status;
+ char iobuff[1024];
+ string reason;
+
+ debug(D_FUNC, "::read_pipe enter");
+
+ if (pipe_io[1][0] == -1)
+ {
+ debug(D_FUNC, "::read_pipe exit - shouldn't have been called?");
+ return 0;
+ }
+
+ size = read(pipe_io[1][0], iobuff, 1024);
+
+ if (size < 0)
+ {
+ // Error.
+ reason = string(strerror(errno));
+
+ // Close remaining pipe.
+ close(pipe_io[1][0]);
+ pipe_io[1][0] = -1;
+
+ // Slaughter child
+ kill(pid, SIGKILL);
+
+ // set flags
+ error = true;
+ running = false;
+
+ // wait until child is dead
+ waitpid(pid, &status, 0);
+
+ // throw the error message that caused this trouble
+ throw string(string("read error: ")+reason);
+ } else if ( size == 0 )
+ {
+
+ // EOF. Close the pipe
+ if(close(pipe_io[1][0]))
+ throw string(string("close error: ")+string(strerror(errno)));
+ pipe_io[1][0] = -1;
+
+ } else
+ {
+ // append to mail buffer
+ mail.append(iobuff, size);
+ debug(D_POLL, "read %ld bytes", size);
+ debug(D_SPAMC, "input \"%*.*s\"", (int)size, (int)size, iobuff);
+ }
+ debug(D_FUNC, "::read_pipe exit");
+ return size;
+}
+
+//
+// Read all output from SpamAssassin client
+// and close the pipe
+//
+void
+SpamAssassin::empty_and_close_pipe()
+{
+ debug(D_FUNC, "::empty_and_close_pipe enter");
+ while (read_pipe())
+ ;
+ debug(D_FUNC, "::empty_and_close_pipe exit");
+}
+
+// }}}
+
+// {{{ Some small subroutines without much relation to functionality
+
+// output error message to syslog facility
+void
+throw_error(const string& errmsg)
+{
+ if (errmsg.c_str())
+ syslog(LOG_ERR, "Thrown error: %s", errmsg.c_str());
+ else
+ syslog(LOG_ERR, "Unknown error");
+}
+
+/* Takes a comma or space-delimited string of debug tokens and sets the
+ appropriate bits in flag_debug. "all" sets all the bits.
+*/
+void parse_debuglevel(char* string)
+{
+ char *token;
+
+ /* make a copy so we don't overwrite argv[] */
+ string = strdup(string);
+
+ /* handle the old numeric values too */
+ switch(atoi(string))
+ {
+ case 3:
+ flag_debug |= (1<<D_UORI) | (1<<D_STR);
+ case 2:
+ flag_debug |= (1<<D_POLL);
+ case 1:
+ flag_debug |= (1<<D_MISC) | (1<<D_FUNC);
+ debug(D_ALWAYS, "Setting debug level to 0x%0x", flag_debug);
+ free(string);
+ return;
+ default:
+ break;
+ }
+
+ while ((token = strsep(&string, ", ")))
+ {
+ int i;
+ for (i=0; debugstrings[i]; i++)
+ {
+ if(strcasecmp(token, "ALL")==0)
+ {
+ flag_debug = (1<<D_MAX)-1;
+ break;
+ }
+ if(strcasecmp(token, debugstrings[i])==0)
+ {
+ flag_debug |= (1<<i);
+ break;
+ }
+ }
+
+ if (!debugstrings[i])
+ {
+ fprintf(stderr, "Invalid debug token \"%s\"\n", token);
+ exit(1);
+ }
+ }
+ debug(D_ALWAYS, "Setting debug level to 0x%0x", flag_debug);
+ free(string);
+}
+
+/*
+ Output a line to syslog using print format, but only if the appropriate
+ debug level is set. The D_ALWAYS level is always enabled.
+*/
+void debug(enum debuglevel level, const char* fmt, ...)
+{
+ if ((1<<level) & flag_debug)
+ {
+#if defined(HAVE_VSYSLOG)
+ va_list vl;
+ va_start(vl, fmt);
+ vsyslog(LOG_ERR, fmt, vl);
+ va_end(vl);
+#else
+#if defined(HAVE_VASPRINTF)
+ char *buf;
+#else
+ char buf[1024];
+#endif
+ va_list vl;
+ va_start(vl, fmt);
+#if defined(HAVE_VASPRINTF)
+ vasprintf(&buf, fmt, vl);
+#else
+#if defined(HAVE_VSNPRINTF)
+ vsnprintf(buf, sizeof(buf)-1, fmt, vl);
+#else
+ /* XXX possible buffer overflow here; be careful what you pass to debug() */
+ vsprintf(buf, fmt, vl);
+#endif
+#endif
+ va_end(vl);
+ syslog(LOG_ERR, "%s", buf);
+#if defined(HAVE_VASPRINTF)
+ free(buf);
+#endif
+#endif /* vsyslog */
+ }
+}
+
+// case-insensitive search
+string::size_type
+find_nocase(const string& array, const string& pattern, string::size_type start)
+{
+ string::size_type pos(start);
+
+ while (pos < array.size())
+ {
+ string::size_type ctr = 0;
+
+ while( (pos+ctr) < array.size() &&
+ toupper(array[pos+ctr]) == toupper(pattern[ctr]) )
+ {
+ ++ctr;
+ if (ctr == pattern.size())
+ {
+ debug(D_STR, "f_nc: <%s><%s>: hit", array.c_str(), pattern.c_str());
+ return pos;
+ }
+ };
+
+ ++pos;
+ };
+
+ debug(D_STR, "f_nc: <%s><%s>: nohit", array.c_str(), pattern.c_str());
+ return string::npos;
+}
+
+// compare case-insensitive
+int
+cmp_nocase_partial(const string& s, const string& s2)
+{
+ string::const_iterator p=s.begin();
+ string::const_iterator p2=s2.begin();
+
+ while ( p != s.end() && p2 != s2.end() ) {
+ if (toupper(*p) != toupper(*p2))
+ {
+ debug(D_STR, "c_nc_p: <%s><%s> : miss", s.c_str(), s2.c_str());
+ return (toupper(*p) < toupper(*p2)) ? -1 : 1;
+ }
+ ++p;
+ ++p2;
+ };
+
+ debug(D_STR, "c_nc_p: <%s><%s> : hit", s.c_str(), s2.c_str());
+ return 0;
+
+}
+
+/* closeall() - close all FDs >= a specified value */
+void closeall(int fd)
+{
+ int fdlimit = sysconf(_SC_OPEN_MAX);
+ while (fd < fdlimit)
+ close(fd++);
+}
+
+void parse_networklist(char *string, struct networklist *list)
+{
+ char *token;
+
+ /* make a copy so we don't overwrite argv[] */
+ string = strdup(string);
+
+ while ((token = strsep(&string, ", ")))
+ {
+ char *tnet = strsep(&token, "/");
+ char *tmask = token;
+ struct in_addr net, mask;
+
+ if (list->num_nets % 10 == 0)
+ list->nets = (struct net*)realloc(list->nets, sizeof(*list->nets) * (list->num_nets + 10));
+
+ if (!inet_aton(tnet, &net))
+ {
+ fprintf(stderr, "Could not parse \"%s\" as a network\n", tnet);
+ exit(1);
+ }
+
+ if (tmask)
+ {
+ if (strchr(tmask, '.') == NULL)
+ {
+ /* CIDR */
+ unsigned int bits;
+ int ret;
+ ret = sscanf(tmask, "%u", &bits);
+ if (ret != 1 || bits > 32)
+ {
+ fprintf(stderr,"%s: bad CIDR value", tmask);
+ exit(1);
+ }
+ mask.s_addr = htonl(~((1L << (32 - bits)) - 1) & 0xffffffff);
+ } else if (!inet_aton(tmask, &mask))
+ {
+ fprintf(stderr, "Could not parse \"%s\" as a netmask\n", tmask);
+ exit(1);
+ }
+ } else
+ mask.s_addr = 0xffffffff;
+
+ {
+ char *snet = strdup(inet_ntoa(net));
+ debug(D_MISC, "Adding %s/%s to network list", snet, inet_ntoa(mask));
+ free(snet);
+ }
+
+ net.s_addr = net.s_addr & mask.s_addr;
+ list->nets[list->num_nets].network = net;
+ list->nets[list->num_nets].netmask = mask;
+ list->num_nets++;
+ }
+ free(string);
+}
+
+int ip_in_networklist(struct in_addr ip, struct networklist *list)
+{
+ int i;
+
+ if (list->num_nets == 0)
+ return 0;
+
+ debug(D_NET, "Checking %s against:", inet_ntoa(ip));
+ for (i = 0; i < list->num_nets; i++)
+ {
+ debug(D_NET, "%s", inet_ntoa(list->nets[i].network));
+ debug(D_NET, "/%s", inet_ntoa(list->nets[i].netmask));
+ if ((ip.s_addr & list->nets[i].netmask.s_addr) == list->nets[i].network.s_addr)
+ {
+ debug(D_NET, "Hit!");
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+char *strlwr(char *str)
+{
+ char *s = str;
+ while (*s)
+ {
+ *s = tolower(*s);
+ s++;
+ }
+ return str;
+}
+
+// }}}
+// vim6:ai:noexpandtab
--- /dev/null
+//-*-c++-*-
+//
+// $Id: spamass-milter.h,v 1.22 2004/09/21 20:51:06 dnelson Exp $
+//
+// Main include file for SpamAss-Milter
+//
+// Copyright (c) 2002 Georg C. F. Greve <greve@gnu.org>,
+// all rights maintained by FSF Europe e.V.,
+// Villa Vogelsang, Antonienallee 1, 45279 Essen, Germany
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// Contact:
+// Michael Brown <michaelb@opentext.com>
+//
+#ifndef _SPAMASS_MILTER_H
+#define _SPAMASS_MILTER_H
+
+#ifdef HAVE_CDEFS_H
+#include <sys/cdefs.h>
+#endif
+#if !defined(__printflike)
+#define __printflike(a,b)
+#endif
+
+#include <list>
+
+using namespace std;
+
+string retrieve_field(const string&, const string&);
+
+sfsistat mlfi_connect(SMFICTX*, char*, _SOCK_ADDR*);
+sfsistat mlfi_helo(SMFICTX*, char*);
+sfsistat mlfi_envrcpt(SMFICTX*, char**);
+sfsistat mlfi_envfrom(SMFICTX*, char**);
+sfsistat mlfi_header(SMFICTX*, char*, char*);
+sfsistat mlfi_eoh(SMFICTX*);
+sfsistat mlfi_body(SMFICTX*, u_char *, size_t);
+sfsistat mlfi_eom(SMFICTX*);
+sfsistat mlfi_close(SMFICTX*);
+sfsistat mlfi_abort(SMFICTX*);
+sfsistat mlfi_abort(SMFICTX*);
+
+extern struct smfiDesc smfilter;
+
+/* struct describing a single network */
+struct net
+{
+ struct in_addr network;
+ struct in_addr netmask;
+};
+
+/* an array of networks */
+struct networklist
+{
+ struct net *nets;
+ int num_nets;
+};
+
+
+// Debug tokens.
+enum debuglevel
+{
+ D_ALWAYS, D_FUNC, D_POLL, D_UORI, D_STR, D_MISC, D_NET, D_SPAMC, D_RCPT,
+ D_COPY,
+ D_MAX // must be last
+};
+
+class SpamAssassin {
+public:
+ SpamAssassin();
+ ~SpamAssassin();
+
+ void Connect();
+ void output(const void*, long);
+ void output(const void*);
+ void output(string);
+ void close_output();
+ void input();
+
+ string& d();
+
+ string& spam_status();
+ string& spam_flag();
+ string& spam_report();
+ string& spam_prev_content_type();
+ string& spam_checker_version();
+ string& spam_level();
+ string& content_type();
+ string& subject();
+ string& rcpt(); /* first RCPT TO: recipient (raw) */
+ string& from(); /* MAIL FROM: sender (raw) */
+ string& connectip(); /* IP of sending machine */
+ string local_user(); /* username part of first expanded recipient */
+ string full_user(); /* full first expanded recipient */
+ int numrcpt(); /* total RCPT TO: recpients */
+ int set_numrcpt(); /* increment total RCPT count */
+ int set_numrcpt(const int); /* set total RCPT count to n */
+ string::size_type set_spam_status(const string&);
+ string::size_type set_spam_flag(const string&);
+ string::size_type set_spam_report(const string&);
+ string::size_type set_spam_prev_content_type(const string&);
+ string::size_type set_spam_checker_version(const string&);
+ string::size_type set_spam_level(const string&);
+ string::size_type set_content_type(const string&);
+ string::size_type set_subject(const string&);
+ string::size_type set_rcpt(const string&);
+ string::size_type set_from(const string&);
+ string::size_type set_connectip(const string&);
+
+private:
+ void empty_and_close_pipe();
+ int read_pipe();
+
+public:
+ // flags
+ bool error;
+ bool running; /* XXX merge running, connected, and pid */
+ bool connected; /* are we connected to spamc? */
+
+ // This is where we store the mail after it
+ // was piped through SpamAssassin
+ string mail;
+
+ // Data written via output() but before Connect() is stored here
+ string outputbuffer;
+
+ // Variables for SpamAssassin influenced fields
+ string x_spam_status, x_spam_flag, x_spam_report, x_spam_prev_content_type;
+ string x_spam_checker_version, x_spam_level, _content_type, _subject;
+
+ // Envelope info: MAIL FROM:, RCPT TO:, and IP address of remote host
+ // _rcpt only holds the first recipient if there are more than one
+ string _from, _rcpt, _connectip;
+
+ // Counter to keep track of the number of recipients
+ int _numrcpt;
+
+ // The list of recipients for the current message
+ list <string> recipients;
+
+ // List of recipients after alias/virtusertable expansion
+ list <string> expandedrcpt;
+
+ // the sendmail queue id for this message; used for logging
+ string queueid;
+
+ // Process handling variables
+ pid_t pid;
+ int pipe_io[2][2];
+};
+
+/* Private data structure to carry per-client data between calls */
+struct context
+{
+ struct in_addr connect_ip; // remote IP address
+ char *helo;
+ SpamAssassin *assassin; // pointer to the SA object if we're processing a message
+};
+
+/* This hack is the only way to call pointers to member functions! */
+typedef string::size_type (SpamAssassin::*t_setter)(const string &val);
+#define callsetter(object, ptrToMember) ((object).*(ptrToMember))
+
+int assassinate(SMFICTX*, SpamAssassin*);
+
+void throw_error(const string&);
+void debug(enum debuglevel, const char* fmt, ...) __printflike(2, 3);
+string::size_type find_nocase(const string&, const string&, string::size_type = 0);
+int cmp_nocase_partial(const string&, const string&);
+void closeall(int fd);
+void parse_networklist(char *string, struct networklist *list);
+int ip_in_networklist(struct in_addr ip, struct networklist *list);
+void parse_debuglevel(char* string);
+char *strlwr(char *str);
+
+#endif
--- /dev/null
+/*-
+ * Copyright (c) 1990, 1993
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the University of
+ * California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#if defined(LIBC_SCCS) && !defined(lint)
+static char sccsid[] = "@(#)strsep.c 8.1 (Berkeley) 6/4/93";
+#endif /* LIBC_SCCS and not lint */
+/* $FreeBSD: src/lib/libc/string/strsep.c,v 1.5 2002/03/21 18:44:54 obrien Exp $ */
+
+/* $Id: strsep.c,v 1.3 2003/06/10 05:02:39 dnelson Exp $ */
+
+#include <string.h>
+#include <stdio.h>
+
+/*
+ * Get next token from string *stringp, where tokens are possibly-empty
+ * strings separated by characters from delim.
+ *
+ * Writes NULs into the string at *stringp to end tokens.
+ * delim need not remain constant from call to call.
+ * On return, *stringp points past the last NUL written (if there might
+ * be further tokens), or is NULL (if there are definitely no more tokens).
+ *
+ * If *stringp is NULL, strsep returns NULL.
+ */
+char *
+strsep(stringp, delim)
+ char **stringp;
+ const char *delim;
+{
+ char *s;
+ const char *spanp;
+ int c, sc;
+ char *tok;
+
+ if ((s = *stringp) == NULL)
+ return (NULL);
+ for (tok = s;;) {
+ c = *s++;
+ spanp = delim;
+ do {
+ if ((sc = *spanp++) == c) {
+ if (c == 0)
+ s = NULL;
+ else
+ s[-1] = 0;
+ *stringp = s;
+ return (tok);
+ }
+ } while (sc != 0);
+ }
+ /* NOTREACHED */
+}
--- /dev/null
+#ifndef _SUBST_POLL_H
+#define _SUBST_POLL_H
+
+/* $Id: subst_poll.h,v 1.2 2003/03/06 21:40:49 dnelson Exp $ */
+
+struct pollfd {
+ int fd;
+ short int events;
+ short int revents;
+};
+
+enum { POLLIN = 1, POLLPRI = 2, POLLOUT = 4,
+ POLLERR = 8, POLLHUP = 16, POLLNVAL = 32 };
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+int poll(struct pollfd *fds, unsigned long nfds, int timeout);
+#ifdef __cplusplus
+}
+#endif
+
+#endif