--- /dev/null
+%define name autorandr
+%define version 1.8.1
+%define release 1
+
+# pmutils
+%define use_pm_utils 1
+%if 0%{?fedora} > 22
+%define use_pm_utils 0
+%endif
+%if 0%{?rhel} > 7
+%define use_pm_utils 0
+%endif
+
+# python 2 or 3
+%define py_ver 3
+%if 0%{?rhel}
+%define py_ver 2
+%endif
+
+Summary: Automatically select a display configuration based on connected devices
+Name: %{name}
+Version: %{version}
+Release: %{release}%{?dist}
+Source0: https://github.com/phillipberndt/%{name}/archive/%{version}/%{name}-%{version}.tar.gz
+License: GPLv3
+Group: Development/Libraries
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-buildroot
+Prefix: %{_prefix}
+BuildArch: noarch
+Vendor: Phillip Berndt <phillip.berndt@googlemail.com>
+Url: https://github.com/phillipberndt/autorandr
+Requires: python%{py_ver}
+%if 0%{?use_pm_utils}
+Requires: pm-utils
+%endif
+%{?systemd_ordering}
+BuildRequires: bash-completion
+BuildRequires: python%{py_ver}-devel
+BuildRequires: systemd
+BuildRequires: udev
+
+%description
+# autorandr
+
+Automatically select a display configuration based on connected devices
+
+## Branch information
+
+This is a compatible Python rewrite of
+[wertarbyte/autorandr](https://github.com/wertarbyte/autorandr). Contributions
+for bash-completion, fd.o/XDG autostart, Nitrogen, pm-utils, and systemd can be
+found under [contrib](contrib/).
+
+The original [wertarbyte/autorandr](https://github.com/wertarbyte/autorandr)
+tree is unmaintained, with lots of open pull requests and issues. I forked it
+and merged what I thought were the most important changes. If you are searching
+for that version, see the [`legacy` branch](https://github.com/phillipberndt/autorandr/tree/legacy).
+Note that the Python version is better suited for non-standard configurations,
+like if you use `--transform` or `--reflect`. If you use `auto-disper`, you
+have to use the bash version, as there is no disper support in the Python
+version (yet). Both versions use a compatible configuration file format, so
+you can, to some extent, switch between them. I will maintain the `legacy`
+branch until @wertarbyte finds the time to maintain his branch again.
+
+If you are interested in why there are two versions around, see
+[#7](https://github.com/phillipberndt/autorandr/issues/7),
+[#8](https://github.com/phillipberndt/autorandr/issues/8) and
+especially
+[#12](https://github.com/phillipberndt/autorandr/issues/12)
+if you are unhappy with this version and would like to contribute to the bash
+version.
+
+## License information and authors
+
+autorandr is available under the terms of the GNU General Public License
+(version 3).
+
+Contributors to this version of autorandr are:
+
+* Adrián López
+* andersonjacob
+* Alexander Wirt
+* Brice Waegeneire
+* Chris Dunder
+* Christoph Gysin
+* Daniel Hahler
+* Maciej Sitarz
+* Mathias Svensson
+* Matthew R Johnson
+* Nazar Mokrynskyi
+* Phillip Berndt
+* Rasmus Wriedt Larsen
+* Simon Wydooghe
+* Stefan Tomanek
+* stormc
+* tachylatus
+* Timo Bingmann
+* Timo Kaufmann
+* Tomasz Bogdal
+* Victor Häggqvist
+* Jan-Oliver Kaiser
+
+## Installation/removal
+
+You can use the `autorandr.py` script as a stand-alone binary. If you'd like to
+install it as a system-wide application, there is a Makefile included that also
+places some configuration files in appropriate directories such that autorandr
+is invoked automatically when a monitor is connected or removed, the system
+wakes up from suspend, or a user logs into an X11 session. Run `make install`
+as root to install it.
+
+If you prefer to have a system wide install managed by your package manager,
+you can
+
+* Use the [official Arch package](https://www.archlinux.org/packages/community/any/autorandr/).
+* Use the [official Debian package](https://packages.debian.org/sid/x11/autorandr) on sid
+* Use the [ebuild from zugaina](https://gpo.zugaina.org/x11-misc/autorandr) on Gentoo.
+* Use the
+ [nix package](https://github.com/NixOS/nixpkgs/blob/master/nixos/modules/services/misc/autorandr.nix)
+ on NixOS.
+* Use the automated nightlies generated by the
+ [openSUSE build service](https://build.opensuse.org/package/show/home:phillipberndt/autorandr)
+ for various distributions (RPM and DEB based).
+* Use the [X binary package system](https://wiki.voidlinux.eu/XBPS)' on Void Linux
+* Build a .deb-file from the source tree using `make deb`.
+
+We appreciate packaging scripts for other distributions, please file a pull
+request if you write one.
+
+If you prefer `pip` over your package manager, you can install autorandr with:
+
+ sudo pip install "git+http://github.com/phillipberndt/autorandr#egg=autorandr"
+
+or simply
+
+ sudo pip install autorandr
+
+if you prefer to use a stable version.
+
+## How to use
+
+Save your current display configuration and setup with:
+
+ autorandr --save mobile
+
+Connect an additional display, configure your setup and save it:
+
+ autorandr --save docked
+
+Now autorandr can detect which hardware setup is active:
+
+ $ autorandr
+ mobile
+ docked (detected)
+
+To automatically reload your setup:
+
+ $ autorandr --change
+
+To manually load a profile:
+
+ $ autorandr --load <profile>
+
+or simply:
+
+ $ autorandr <profile>
+
+autorandr tries to avoid reloading an identical configuration. To force the
+(re)configuration:
+
+ $ autorandr --load <profile> --force
+
+To prevent a profile from being loaded, place a script call _block_ in its
+directory. The script is evaluated before the screen setup is inspected, and
+in case of it returning a value of 0 the profile is skipped. This can be used
+to query the status of a docking station you are about to leave.
+
+If no suitable profile can be identified, the current configuration is kept.
+To change this behaviour and switch to a fallback configuration, specify
+`--default <profile>`. The system-wide installation of autorandr by default
+calls autorandr with a parameter `--default default`. There are three special,
+virtual configurations called `horizontal`, `vertical` and `common`. They
+automatically generate a configuration that incorporates all screens
+connected to the computer. You can symlink `default` to one of these
+names in your configuration directory to have autorandr use any of them
+as the default configuration without you having to change the system-wide
+configuration.
+
+You can store default values for any option in an INI-file in
+`~/.config/autorandr/settings.ini` in a section `config`. The most useful
+candidate for doing that is `skip-options`, if you need it.
+
+## Advanced usage
+
+### Hook scripts
+
+Three more scripts can be placed in the configuration directory (as
+(as defined by the [XDG spec](https://specifications.freedesktop.org/basedir-spec/basedir-spec-latest.html),
+usually `~/.config/autorandr` or `~/.autorandr` if you have an old installation
+for user configuration and `/etc/xdg/autorandr` for system wide configuration):
+
+- `postswitch` is executed *after* a mode switch has taken place. This can be
+ used to notify window managers or other applications about the switch.
+- `preswitch` is executed *before* a mode switch takes place.
+- `postsave` is executed after a profile was stored or altered.
+- `predetect` is executed before autorandr attempts to run xrandr.
+
+These scripts must be executable and can be placed directly in the configuration
+directory, where they will always be executed, or in the profile subdirectories,
+where they will only be executed on changes regarding that specific profile.
+
+Instead (or in addition) to these scripts, you can also place as many executable
+files as you like in subdirectories called `script_name.d` (e.g. `postswitch.d`).
+
+If a script with the same name occurs multiple times, user configuration
+takes precedence over system configuration (as specified by the
+[XDG spec](https://specifications.freedesktop.org/basedir-spec/basedir-spec-latest.html))
+and profile configuration over general configuration.
+
+As a concrete example, suppose you have the files
+
+- `/etc/xdg/autorandr/postswitch`
+- `~/.config/autorandr/postswitch`
+- `~/.config/autorandr/postswitch.d/notify-herbstluftwm`
+- `~/.config/autorandr/docked/postswitch`
+
+and switch from `mobile` to `docked`. Then
+`~/.config/autorandr/docked/postswitch` is executed, since the profile specific
+configuration takes precedence, and
+`~/.config/autorandr/postswitch.d/notify-herbstluftwm` is executed, since
+it has a unique name.
+
+If you switch back from `docked` to `mobile`, `~/.config/autorandr/postswitch`
+is executed instead of the `mobile` specific `postswitch`.
+
+In these scripts, some of autorandr's state is exposed as environment variables
+prefixed with `AUTORANDR_`, such as:
+- `AUTORANDR_CURRENT_PROFILE`
+- `AUTORANDR_CURRENT_PROFILES`
+- `AUTORANDR_PROFILE_FOLDER`
+- `AUTORANDR_MONITORS`
+
+If you experience issues with xrandr being executed too early after connecting
+a new monitor, then you can use a `predetect` script to delay the execution.
+Write e.g. `sleep 1` into that file to make autorandr wait a second before
+running `xrandr`.
+
+### Wildcard EDID matching
+
+The EDID strings in the `~/.config/autorandr/*/setup` files may contain an
+asterisk to enable wildcard matching: Such EDIDs are matched against connected
+monitors using the usual file name globbing rules. This can be used to create
+profiles matching multiple (or any) monitors.
+
+## Changelog
+
+**autorandr 1.8.1**
+
+* *2019-03-18* Removed mandb call from Makefile
+
+**autorandr 1.8**
+
+* *2019-02-17* Add an X11 daemon that runs autorandr when a display connects (by @rliou92, #127)
+* *2019-02-17* Replace width=0 check with disconnected to detect disconnected monitors (by @joseph-jones, #139)
+* *2019-02-17* Fix handling of empty padding (by @jschwab, #138)
+* *2019-02-17* Add a man page (by @somers-all-the-time, #133)
+
+**autorandr 1.7**
+
+* *2018-09-25* Fix FB size computation with rotated screens (by @Janno, #117)
+
+**autorandr 1.6**
+
+* *2018-04-19* Bugfix: Do not load default profile unless --change is set
+* *2018-04-30* Added a `AUTORANDR_MONITORS` variable to hooks (by @bricewge, #106)
+* *2018-06-29* Fix detection of current configuration if extra monitors are active
+* *2018-07-11* Bugfix in the latest change: Correctly handle "off" minitors when comparing
+* *2018-07-19* Do not kill spawned user processes from systemd unit
+* *2018-07-20* Correctly handle "off" monitors when comparing -- fixup for another bug.
+
+**autorandr 1.5**
+
+* *2018-01-03* Add --version
+* *2018-01-04* Fixed vertical/horizontal/clone-largest virtual profiles
+* *2018-03-07* Output all non-error messages to stdout instead of stderr
+* *2018-03-25* Add --detected and --current to filter the profile list output
+* *2018-03-25* Allow wildcard matching in EDIDs
+
+**autorandr 1.4**
+
+* *2017-12-22* Fixed broken virtual profile support
+* *2017-12-14* Added support for a settings file
+* *2017-12-14* Added a virtual profile `off`, which disables all screens
+
+**autorandr 1.3**
+
+* *2017-11-13* Add a short form for `--load`
+* *2017-11-21* Fix environment stealing in `--batch` mode (See #87)
+
+**autorandr 1.2**
+
+* *2017-07-16* Skip `--panning` unless it is required (See #72)
+* *2017-10-13* Add `clone-largest` virtual profile
+
+**autorandr 1.1**
+
+* *2017-06-07* Call systemctl with `--no-block` from udev rule (See #61)
+* *2017-01-20* New script hook, `predetect`
+* *2017-01-18* Accept comments (lines starting with `#`) in config/setup files
+
+**autorandr 1.0**
+
+* *2016-12-07* Tag the current code as version 1.0.0; see github issue #54
+* *2016-10-03* Install a desktop file to `/etc/xdg/autostart` by default
+
+
+%prep
+%setup -n %{name}-%{version} -n %{name}-%{version}
+%if %{py_ver} == 3
+pathfix.py -pni "%{__python3} %{py3_shbang_opts}" ./autorandr.py
+%else
+pathfix.py -pni "%{__python2} %{py2_shbang_opts}" ./autorandr.py
+%endif
+
+%install
+make DESTDIR="%{buildroot}" PREFIX=/usr install
+install -vDm 644 README.md -t "%{buildroot}/usr/share/doc/%{name}/"
+
+%files
+%defattr(-,root,root,-)
+%attr(0644,root,root) %{_unitdir}/autorandr.service
+%license gpl-3.0.txt
+%doc README.md
+%config(noreplace) %{_sysconfdir}/*
+%{_bindir}/*
+%{_mandir}
+%{_datarootdir}/bash-completion/completions/autorandr
+%{_udevrulesdir}/40-monitor-hotplug.rules
+%changelog
+* Wed May 22 2019 Maciej Sitarz <macieksitarz@wp.pl> - 1.8.1-1
+- Updated to stable 1.8.1
+* Fri Sep 28 2018 Maciej Sitarz <macieksitarz@wp.pl> - 1.7-1
+- Updated to stable 1.7
+* Thu Jul 19 2018 Maciej Sitarz <macieksitarz@wp.pl> - 1.5-1
+- Updated to stable 1.5
+- Changed dest path for systemd service file
+* Sun Oct 01 2017 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 1.1-2
+- Added conditionals for pm-utils, compability with Fedora26+
+- Removed bash-completion from requisites
+- Removed udev from requisites
+* Sun Sep 03 2017 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 1.1-1
+- Update to stable 1.1
+* Fri Feb 17 2017 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 20170217git-1
+- Update to master
+* Wed Jul 6 2016 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 20160706git-1
+- Set default value of $XDG_CONFIG_DIRS to fulfill the standard
+* Fri Jul 1 2016 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 20160701git-1.1
+- fixed running udevadm in post
+* Fri Jul 1 2016 Jerzy Drozdz <rpmbuilder@jdsieci.pl> - 20160701git-1
+- initial build
projects / deb_pkgs / autorandr.git / commitdiff