--- /dev/null
+# Rename this distribution example file to motion.conf
+#
+# This config file was generated by motion 3.2.12+git20140228
+
+
+############################################################
+# Daemon
+############################################################
+
+# Start in daemon (background) mode and release terminal (default: off)
+daemon on
+
+# File to store the process ID, also called pid file. (default: not defined)
+process_id_file /var/run/motion/motion.pid
+
+############################################################
+# Basic Setup Mode
+############################################################
+
+# Start in Setup-Mode, daemon disabled. (default: off)
+setup_mode off
+
+
+# Use a file to save logs messages, if not defined stderr and syslog is used. (default: not defined)
+;logfile /tmp/motion.log
+
+# Level of log messages [1..9] (EMR, ALR, CRT, ERR, WRN, NTC, INF, DBG, ALL). (default: 6 / NTC)
+log_level 6
+
+# Filter to log messages by type (COR, STR, ENC, NET, DBL, EVT, TRK, VID, ALL). (default: ALL)
+log_type all
+
+###########################################################
+# Capture device options
+############################################################
+
+# Videodevice to be used for capturing (default /dev/video0)
+# for FreeBSD default is /dev/bktr0
+videodevice /dev/video0
+
+# v4l2_palette allows to choose preferable palette to be use by motion
+# to capture from those supported by your videodevice. (default: 17)
+# E.g. if your videodevice supports both V4L2_PIX_FMT_SBGGR8 and
+# V4L2_PIX_FMT_MJPEG then motion will by default use V4L2_PIX_FMT_MJPEG.
+# Setting v4l2_palette to 2 forces motion to use V4L2_PIX_FMT_SBGGR8
+# instead.
+#
+# Values :
+# V4L2_PIX_FMT_SN9C10X : 0 'S910'
+# V4L2_PIX_FMT_SBGGR16 : 1 'BYR2'
+# V4L2_PIX_FMT_SBGGR8 : 2 'BA81'
+# V4L2_PIX_FMT_SPCA561 : 3 'S561'
+# V4L2_PIX_FMT_SGBRG8 : 4 'GBRG'
+# V4L2_PIX_FMT_SGRBG8 : 5 'GRBG'
+# V4L2_PIX_FMT_PAC207 : 6 'P207'
+# V4L2_PIX_FMT_PJPG : 7 'PJPG'
+# V4L2_PIX_FMT_MJPEG : 8 'MJPEG'
+# V4L2_PIX_FMT_JPEG : 9 'JPEG'
+# V4L2_PIX_FMT_RGB24 : 10 'RGB3'
+# V4L2_PIX_FMT_SPCA501 : 11 'S501'
+# V4L2_PIX_FMT_SPCA505 : 12 'S505'
+# V4L2_PIX_FMT_SPCA508 : 13 'S508'
+# V4L2_PIX_FMT_UYVY : 14 'UYVY'
+# V4L2_PIX_FMT_YUYV : 15 'YUYV'
+# V4L2_PIX_FMT_YUV422P : 16 '422P'
+# V4L2_PIX_FMT_YUV420 : 17 'YU12'
+#
+v4l2_palette 17
+
+# Tuner device to be used for capturing using tuner as source (default /dev/tuner0)
+# This is ONLY used for FreeBSD. Leave it commented out for Linux
+; tunerdevice /dev/tuner0
+
+# The video input to be used (default: -1)
+# Should normally be set to 0 or 1 for video/TV cards, and -1 for USB cameras
+input -1
+
+# The video norm to use (only for video capture and TV tuner cards)
+# Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour). Default: 0 (PAL)
+norm 0
+
+# The frequency to set the tuner to (kHz) (only for TV tuner cards) (default: 0)
+frequency 0
+
+# Rotate image this number of degrees. The rotation affects all saved images as
+# well as movies. Valid values: 0 (default = no rotation), 90, 180 and 270.
+rotate 0
+
+# Image width (pixels). Valid range: Camera dependent, default: 352
+width 1280
+
+# Image height (pixels). Valid range: Camera dependent, default: 288
+height 720
+
+# Maximum number of frames to be captured per second.
+# Valid range: 2-100. Default: 100 (almost no limit).
+framerate 100
+
+# Minimum time in seconds between capturing picture frames from the camera.
+# Default: 0 = disabled - the capture rate is given by the camera framerate.
+# This option is used when you want to capture images at a rate lower than 2 per second.
+minimum_frame_time 0
+
+# URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// mjpg:// rstp:// or file:///)
+# Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined
+; netcam_url value
+
+# Username and password for network camera (only if required). Default: not defined
+# Syntax is user:password
+; netcam_userpass value
+
+# The setting for keep-alive of network socket, should improve performance on compatible net cameras.
+# off: The historical implementation using HTTP/1.0, closing the socket after each http request.
+# force: Use HTTP/1.0 requests with keep alive header to reuse the same connection.
+# on: Use HTTP/1.1 requests that support keep alive as default.
+# Default: off
+netcam_keepalive off
+
+# URL to use for a netcam proxy server, if required, e.g. "http://myproxy".
+# If a port number other than 80 is needed, use "http://myproxy:1234".
+# Default: not defined
+; netcam_proxy value
+
+# Set less strict jpeg checks for network cameras with a poor/buggy firmware.
+# Default: off
+netcam_tolerant_check off
+
+# Let motion regulate the brightness of a video device (default: off).
+# The auto_brightness feature uses the brightness option as its target value.
+# If brightness is zero auto_brightness will adjust to average brightness value 128.
+# Only recommended for cameras without auto brightness
+auto_brightness off
+
+# Set the initial brightness of a video device.
+# If auto_brightness is enabled, this value defines the average brightness level
+# which Motion will try and adjust to.
+# Valid range 0-255, default 0 = disabled
+brightness 0
+
+# Set the contrast of a video device.
+# Valid range 0-255, default 0 = disabled
+contrast 0
+
+# Set the saturation of a video device.
+# Valid range 0-255, default 0 = disabled
+saturation 0
+
+# Set the hue of a video device (NTSC feature).
+# Valid range 0-255, default 0 = disabled
+hue 0
+
+
+############################################################
+# Round Robin (multiple inputs on same video device name)
+############################################################
+
+# Number of frames to capture in each roundrobin step (default: 1)
+roundrobin_frames 1
+
+# Number of frames to skip before each roundrobin step (default: 1)
+roundrobin_skip 1
+
+# Try to filter out noise generated by roundrobin (default: off)
+switchfilter off
+
+
+############################################################
+# Motion Detection Settings:
+############################################################
+
+# Threshold for number of changed pixels in an image that
+# triggers motion detection (default: 1500)
+threshold 4000
+
+# Automatically tune the threshold down if possible (default: off)
+threshold_tune off
+
+# Noise threshold for the motion detection (default: 32)
+noise_level 64
+
+# Automatically tune the noise threshold (default: on)
+noise_tune on
+
+# Despeckle motion image using (e)rode or (d)ilate or (l)abel (Default: not defined)
+# Recommended value is EedDl. Any combination (and number of) of E, e, d, and D is valid.
+# (l)abeling must only be used once and the 'l' must be the last letter.
+# Comment out to disable
+despeckle_filter EedDl
+
+# Detect motion in predefined areas (1 - 9). Areas are numbered like that: 1 2 3
+# A script (on_area_detected) is started immediately when motion is 4 5 6
+# detected in one of the given areas, but only once during an event. 7 8 9
+# One or more areas can be specified with this option. Take care: This option
+# does NOT restrict detection to these areas! (Default: not defined)
+; area_detect value
+
+# PGM file to use as a sensitivity mask.
+# Full path name to. (Default: not defined)
+; mask_file value
+
+# Dynamically create a mask file during operation (default: 0)
+# Adjust speed of mask changes from 0 (off) to 10 (fast)
+smart_mask_speed 4
+
+# Ignore sudden massive light intensity changes given as a percentage of the picture
+# area that changed intensity. Valid range: 0 - 100 , default: 0 = disabled
+lightswitch 40
+
+# Picture frames must contain motion at least the specified number of frames
+# in a row before they are detected as true motion. At the default of 1, all
+# motion is detected. Valid range: 1 to thousands, recommended 1-5
+minimum_motion_frames 5
+
+# Specifies the number of pre-captured (buffered) pictures from before motion
+# was detected that will be output at motion detection.
+# Recommended range: 0 to 5 (default: 0)
+# Do not use large values! Large values will cause Motion to skip video frames and
+# cause unsmooth movies. To smooth movies use larger values of post_capture instead.
+pre_capture 0
+
+# Number of frames to capture after motion is no longer detected (default: 0)
+post_capture 5
+
+# Event Gap is the seconds of no motion detection that triggers the end of an event.
+# An event is defined as a series of motion images taken within a short timeframe.
+# Recommended value is 60 seconds (Default). The value -1 is allowed and disables
+# events causing all Motion to be written to one single movie file and no pre_capture.
+# If set to 0, motion is running in gapless mode. Movies don't have gaps anymore. An
+# event ends right after no more motion is detected and post_capture is over.
+event_gap 60
+
+# Maximum length in seconds of a movie
+# When value is exceeded a new movie file is created. (Default: 0 = infinite)
+max_movie_time 0
+
+# Always save images even if there was no motion (default: off)
+emulate_motion off
+
+
+############################################################
+# Image File Output
+############################################################
+
+# Output 'normal' pictures when motion is detected (default: on)
+# Valid values: on, off, first, best, center
+# When set to 'first', only the first picture of an event is saved.
+# Picture with most motion of an event is saved when set to 'best'.
+# Picture with motion nearest center of picture is saved when set to 'center'.
+# Can be used as preview shot for the corresponding movie.
+output_pictures on
+
+# Output pictures with only the pixels moving object (ghost images) (default: off)
+output_debug_pictures off
+
+# The quality (in percent) to be used by the jpeg compression (default: 75)
+quality 75
+
+# Type of output images
+# Valid values: jpeg, ppm (default: jpeg)
+picture_type jpeg
+
+############################################################
+# FFMPEG related options
+# Film (movies) file output, and deinterlacing of the video input
+# The options movie_filename and timelapse_filename are also used
+# by the ffmpeg feature
+############################################################
+
+# Use ffmpeg to encode movies in realtime (default: off)
+ffmpeg_output_movies on
+
+# Use ffmpeg to make movies with only the pixels moving
+# object (ghost images) (default: off)
+ffmpeg_output_debug_movies off
+
+# Use ffmpeg to encode a timelapse movie
+# Default value 0 = off - else save frame every Nth second
+ffmpeg_timelapse 0
+
+# The file rollover mode of the timelapse video
+# Valid values: hourly, daily (default), weekly-sunday, weekly-monday, monthly, manual
+ffmpeg_timelapse_mode daily
+
+# Bitrate to be used by the ffmpeg encoder (default: 400000)
+# This option is ignored if ffmpeg_variable_bitrate is not 0 (disabled)
+ffmpeg_bps 500000
+
+# Enables and defines variable bitrate for the ffmpeg encoder.
+# ffmpeg_bps is ignored if variable bitrate is enabled.
+# Valid values: 0 (default) = fixed bitrate defined by ffmpeg_bps,
+# or the range 2 - 31 where 2 means best quality and 31 is worst.
+ffmpeg_variable_bitrate 0
+
+# Codec to used by ffmpeg for the video compression.
+# Timelapse mpegs are always made in mpeg1 format independent from this option.
+# Supported formats are: mpeg1 (ffmpeg-0.4.8 only), mpeg4 (default), and msmpeg4.
+# mpeg1 - gives you files with extension .mpg
+# mpeg4 or msmpeg4 - gives you files with extension .avi
+# msmpeg4 is recommended for use with Windows Media Player because
+# it requires no installation of codec on the Windows client.
+# swf - gives you a flash film with extension .swf
+# flv - gives you a flash video with extension .flv
+# ffv1 - FF video codec 1 for Lossless Encoding ( experimental )
+# mov - QuickTime ( testing )
+# ogg - Ogg/Theora ( testing )
+ffmpeg_video_codec mpeg4
+
+# Use ffmpeg to deinterlace video. Necessary if you use an analog camera
+# and see horizontal combing on moving objects in video or pictures.
+# (default: off)
+ffmpeg_deinterlace off
+
+############################################################
+# SDL Window
+############################################################
+
+# Number of motion thread to show in SDL Window (default: 0 = disabled)
+sdl_threadnr 0
+
+############################################################
+# External pipe to video encoder
+# Replacement for FFMPEG builtin encoder for ffmpeg_output_movies only.
+# The options movie_filename and timelapse_filename are also used
+# by the ffmpeg feature
+#############################################################
+
+# Bool to enable or disable extpipe (default: off)
+use_extpipe off
+
+# External program (full path and opts) to pipe raw video to
+# Generally, use '-' for STDIN...
+;extpipe mencoder -demuxer rawvideo -rawvideo w=320:h=240:i420 -ovc x264 -x264encopts bframes=4:frameref=1:subq=1:scenecut=-1:nob_adapt:threads=1:keyint=1000:8x8dct:vbv_bufsize=4000:crf=24:partitions=i8x8,i4x4:vbv_maxrate=800:no-chroma-me -vf denoise3d=16:12:48:4,pp=lb -of avi -o %f.avi - -fps %fps
+
+
+
+############################################################
+# Snapshots (Traditional Periodic Webcam File Output)
+############################################################
+
+# Make automated snapshot every N seconds (default: 0 = disabled)
+snapshot_interval 0
+
+
+############################################################
+# Text Display
+# %Y = year, %m = month, %d = date,
+# %H = hour, %M = minute, %S = second, %T = HH:MM:SS,
+# %v = event, %q = frame number, %t = thread (camera) number,
+# %D = changed pixels, %N = noise level, \n = new line,
+# %i and %J = width and height of motion area,
+# %K and %L = X and Y coordinates of motion center
+# %C = value defined by text_event - do not use with text_event!
+# You can put quotation marks around the text to allow
+# leading spaces
+############################################################
+
+# Locate and draw a box around the moving object.
+# Valid values: on, off, preview (default: off)
+# Set to 'preview' will only draw a box in preview_shot pictures.
+locate_motion_mode off
+
+# Set the look and style of the locate box if enabled.
+# Valid values: box, redbox, cross, redcross (default: box)
+# Set to 'box' will draw the traditional box.
+# Set to 'redbox' will draw a red box.
+# Set to 'cross' will draw a little cross to mark center.
+# Set to 'redcross' will draw a little red cross to mark center.
+locate_motion_style box
+
+# Draws the timestamp using same options as C function strftime(3)
+# Default: %Y-%m-%d\n%T = date in ISO format and time in 24 hour clock
+# Text is placed in lower right corner
+text_right %Y-%m-%d\n%T-%q
+
+# Draw a user defined text on the images using same options as C function strftime(3)
+# Default: Not defined = no text
+# Text is placed in lower left corner
+; text_left CAMERA %t
+
+# Draw the number of changed pixed on the images (default: off)
+# Will normally be set to off except when you setup and adjust the motion settings
+# Text is placed in upper right corner
+text_changes off
+
+# This option defines the value of the special event conversion specifier %C
+# You can use any conversion specifier in this option except %C. Date and time
+# values are from the timestamp of the first image in the current event.
+# Default: %Y%m%d%H%M%S
+# The idea is that %C can be used filenames and text_left/right for creating
+# a unique identifier for each event.
+text_event %Y%m%d%H%M%S
+
+# Draw characters at twice normal size on images. (default: off)
+text_double off
+
+
+# Text to include in a JPEG EXIF comment
+# May be any text, including conversion specifiers.
+# The EXIF timestamp is included independent of this text.
+;exif_text %i%J/%K%L
+
+############################################################
+# Target Directories and filenames For Images And Films
+# For the options snapshot_, picture_, movie_ and timelapse_filename
+# you can use conversion specifiers
+# %Y = year, %m = month, %d = date,
+# %H = hour, %M = minute, %S = second,
+# %v = event, %q = frame number, %t = thread (camera) number,
+# %D = changed pixels, %N = noise level,
+# %i and %J = width and height of motion area,
+# %K and %L = X and Y coordinates of motion center
+# %C = value defined by text_event
+# Quotation marks round string are allowed.
+############################################################
+
+# Target base directory for pictures and films
+# Recommended to use absolute path. (Default: current working directory)
+target_dir /tmp/motion
+
+# File path for snapshots (jpeg or ppm) relative to target_dir
+# Default: %v-%Y%m%d%H%M%S-snapshot
+# Default value is equivalent to legacy oldlayout option
+# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-snapshot
+# File extension .jpg or .ppm is automatically added so do not include this.
+# Note: A symbolic link called lastsnap.jpg created in the target_dir will always
+# point to the latest snapshot, unless snapshot_filename is exactly 'lastsnap'
+snapshot_filename %v-%Y%m%d%H%M%S-snapshot
+
+# File path for motion triggered images (jpeg or ppm) relative to target_dir
+# Default: %v-%Y%m%d%H%M%S-%q
+# Default value is equivalent to legacy oldlayout option
+# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q
+# File extension .jpg or .ppm is automatically added so do not include this
+# Set to 'preview' together with best-preview feature enables special naming
+# convention for preview shots. See motion guide for details
+picture_filename %v-%Y%m%d%H%M%S-%q
+
+# File path for motion triggered ffmpeg films (movies) relative to target_dir
+# Default: %v-%Y%m%d%H%M%S
+# Default value is equivalent to legacy oldlayout option
+# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H%M%S
+# File extension .mpg or .avi is automatically added so do not include this
+# This option was previously called ffmpeg_filename
+movie_filename %v-%Y%m%d%H%M%S
+
+# File path for timelapse movies relative to target_dir
+# Default: %Y%m%d-timelapse
+# Default value is near equivalent to legacy oldlayout option
+# For Motion 3.0 compatible mode choose: %Y/%m/%d-timelapse
+# File extension .mpg is automatically added so do not include this
+timelapse_filename %Y%m%d-timelapse
+
+############################################################
+# Global Network Options
+############################################################
+# Enable or disable IPV6 for http control and stream (default: off )
+ipv6_enabled off
+
+############################################################
+# Live Stream Server
+############################################################
+
+# The mini-http server listens to this port for requests (default: 0 = disabled)
+stream_port 8081
+
+# Quality of the jpeg (in percent) images produced (default: 50)
+stream_quality 50
+
+# Output frames at 1 fps when no motion is detected and increase to the
+# rate given by stream_maxrate when motion is detected (default: off)
+stream_motion off
+
+# Maximum framerate for stream streams (default: 1)
+stream_maxrate 1
+
+# Restrict stream connections to localhost only (default: on)
+stream_localhost on
+
+# Limits the number of images per connection (default: 0 = unlimited)
+# Number can be defined by multiplying actual stream rate by desired number of seconds
+# Actual stream rate is the smallest of the numbers framerate and stream_maxrate
+stream_limit 0
+
+# Set the authentication method (default: 0)
+# 0 = disabled
+# 1 = Basic authentication
+# 2 = MD5 digest (the safer authentication)
+stream_auth_method 0
+
+# Authentication for the stream. Syntax username:password
+# Default: not defined (Disabled)
+; stream_authentication username:password
+
+
+############################################################
+# HTTP Based Control
+############################################################
+
+# TCP/IP port for the http server to listen on (default: 0 = disabled)
+webcontrol_port 8080
+
+# Restrict control connections to localhost only (default: on)
+webcontrol_localhost on
+
+# Output for http server, select off to choose raw text plain (default: on)
+webcontrol_html_output on
+
+# Authentication for the http based control. Syntax username:password
+# Default: not defined (Disabled)
+; webcontrol_authentication username:password
+
+
+############################################################
+# Tracking (Pan/Tilt)
+#############################################################
+
+# Type of tracker (0=none (default), 1=stepper, 2=iomojo, 3=pwc, 4=generic, 5=uvcvideo, 6=servo)
+# The generic type enables the definition of motion center and motion size to
+# be used with the conversion specifiers for options like on_motion_detected
+track_type 0
+
+# Enable auto tracking (default: off)
+track_auto off
+
+# Serial port of motor (default: none)
+;track_port /dev/ttyS0
+
+# Motor number for x-axis (default: 0)
+;track_motorx 0
+
+# Set motorx reverse (default: 0)
+;track_motorx_reverse 0
+
+# Motor number for y-axis (default: 0)
+;track_motory 1
+
+# Set motory reverse (default: 0)
+;track_motory_reverse 0
+
+# Maximum value on x-axis (default: 0)
+;track_maxx 200
+
+# Minimum value on x-axis (default: 0)
+;track_minx 50
+
+# Maximum value on y-axis (default: 0)
+;track_maxy 200
+
+# Minimum value on y-axis (default: 0)
+;track_miny 50
+
+# Center value on x-axis (default: 0)
+;track_homex 128
+
+# Center value on y-axis (default: 0)
+;track_homey 128
+
+# ID of an iomojo camera if used (default: 0)
+track_iomojo_id 0
+
+# Angle in degrees the camera moves per step on the X-axis
+# with auto-track (default: 10)
+# Currently only used with pwc type cameras
+track_step_angle_x 10
+
+# Angle in degrees the camera moves per step on the Y-axis
+# with auto-track (default: 10)
+# Currently only used with pwc type cameras
+track_step_angle_y 10
+
+# Delay to wait for after tracking movement as number
+# of picture frames (default: 10)
+track_move_wait 10
+
+# Speed to set the motor to (stepper motor option) (default: 255)
+track_speed 255
+
+# Number of steps to make (stepper motor option) (default: 40)
+track_stepsize 40
+
+
+############################################################
+# External Commands, Warnings and Logging:
+# You can use conversion specifiers for the on_xxxx commands
+# %Y = year, %m = month, %d = date,
+# %H = hour, %M = minute, %S = second,
+# %v = event, %q = frame number, %t = thread (camera) number,
+# %D = changed pixels, %N = noise level,
+# %i and %J = width and height of motion area,
+# %K and %L = X and Y coordinates of motion center
+# %C = value defined by text_event
+# %f = filename with full path
+# %n = number indicating filetype
+# Both %f and %n are only defined for on_picture_save,
+# on_movie_start and on_movie_end
+# Quotation marks round string are allowed.
+############################################################
+
+# Do not sound beeps when detecting motion (default: on)
+# Note: Motion never beeps when running in daemon mode.
+quiet on
+
+# Command to be executed when an event starts. (default: none)
+# An event starts at first motion detected after a period of no motion defined by event_gap
+; on_event_start value
+
+# Command to be executed when an event ends after a period of no motion
+# (default: none). The period of no motion is defined by option event_gap.
+; on_event_end value
+
+# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
+# To give the filename as an argument to a command append it with %f
+; on_picture_save value
+
+# Command to be executed when a motion frame is detected (default: none)
+; on_motion_detected value
+
+# Command to be executed when motion in a predefined area is detected
+# Check option 'area_detect'. (default: none)
+; on_area_detected value
+
+# Command to be executed when a movie file (.mpg|.avi) is created. (default: none)
+# To give the filename as an argument to a command append it with %f
+; on_movie_start value
+
+# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
+# To give the filename as an argument to a command append it with %f
+on_movie_end /home/don/motion_detected.sh %f
+
+# Command to be executed when a camera can't be opened or if it is lost
+# NOTE: There is situations when motion don't detect a lost camera!
+# It depends on the driver, some drivers dosn't detect a lost camera at all
+# Some hangs the motion thread. Some even hangs the PC! (default: none)
+; on_camera_lost value
+
+#####################################################################
+# Common Options for database features.
+# Options require database options to be active also.
+#####################################################################
+
+# Log to the database when creating motion triggered picture file (default: on)
+; sql_log_picture on
+
+# Log to the database when creating a snapshot image file (default: on)
+; sql_log_snapshot on
+
+# Log to the database when creating motion triggered movie file (default: off)
+; sql_log_movie off
+
+# Log to the database when creating timelapse movies file (default: off)
+; sql_log_timelapse off
+
+# SQL query string that is sent to the database
+# Use same conversion specifiers has for text features
+# Additional special conversion specifiers are
+# %n = the number representing the file_type
+# %f = filename with full path
+# Default value:
+# Create tables :
+##
+# Mysql
+# CREATE TABLE security (camera int, filename char(80) not null, frame int, file_type int, time_stamp timestamp(14), event_time_stamp timestamp(14));
+#
+# Postgresql
+# CREATE TABLE security (camera int, filename char(80) not null, frame int, file_type int, time_stamp timestamp without time zone, event_time_stamp timestamp without time zone);
+#
+# insert into security(camera, filename, frame, file_type, time_stamp, text_event) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
+; sql_query insert into security(camera, filename, frame, file_type, time_stamp, event_time_stamp) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
+
+
+############################################################
+# Database Options
+############################################################
+
+# database type : mysql, postgresql, sqlite3 (default : not defined)
+; database_type value
+
+# database to log to (default: not defined)
+; database_dbname value
+
+# The host on which the database is located (default: localhost)
+; database_host value
+
+# User account name for database (default: not defined)
+; database_user value
+
+# User password for database (default: not defined)
+; database_password value
+
+# Port on which the database is located
+# mysql 3306 , postgresql 5432 (default: not defined)
+; database_port value
+
+############################################################
+# Database Options For SQLite3
+############################################################
+
+# SQLite3 database (file path) (default: not defined)
+; sqlite3_db value
+
+
+
+############################################################
+# Video Loopback Device (vloopback project)
+############################################################
+
+# Output images to a video4linux loopback device
+# The value '-' means next available (default: not defined)
+; video_pipe value
+
+# Output motion images to a video4linux loopback device
+# The value '-' means next available (default: not defined)
+; motion_video_pipe value
+
+
+##############################################################
+# Thread config files - One for each camera.
+# Except if only one camera - You only need this config file.
+# If you have more than one camera you MUST define one thread
+# config file for each camera in addition to this config file.
+##############################################################
+
+# Remember: If you have more than one camera you must have one
+# thread file for each camera. E.g. 2 cameras requires 3 files:
+# This motion.conf file AND thread1.conf and thread2.conf.
+# Only put the options that are unique to each camera in the
+# thread config files.
+; thread /etc/motion/thread1.conf
+; thread /etc/motion/thread2.conf
+; thread /etc/motion/thread3.conf
+; thread /etc/motion/thread4.conf
+
projects / catcam.git / commitdiff