1 CHANGES IN APE VERSION 3.0
6 o plot.phylo() has a new option 'rotate.tree' to rotate unrooted,
7 fan or radial trees around the center of the plot.
12 o mantel.test() could return P-values > 1 with the default
15 o extract.clade() sometimes shuffled some tip labels (thanks to
16 Ludovic Mallet and Mahendra Mariadassou for the fix).
18 o clustal() should now by default find the executable under Windows.
23 o The code of yule() has been simplified and is now much faster for
26 o The code of mantel.test() has been adjusted to be consistent
27 with common permutation tests.
29 o The C code of base.freq() has been improved and is now nearly 8
34 CHANGES IN APE VERSION 2.8
39 o Twelve new functions have been written by Andrei-Alin Popescu:
40 additive, ultrametric, is.compatible, arecompatible, mvr, mvrs,
41 njs, bionjs, SDM, treePop, triangMtd, triangMtd*.
43 o A new class "bitsplits" has been created by Andrei-Alin Popescu
44 to code splits (aka, bipartition).
46 o There is a new generic function as.bitsplits with a method to
47 convert from the class "prop.part" to the class "bitsplits".
49 o The new function ltt.coplot plots on the same scales a tree and
52 o ltt.plot() has two new options: backward and tol. It can now
53 handle non-ultrametic trees and its internal coding has been
54 improved. The coordinates of the plot can now be computed with
55 the new function ltt.plot.coords.
60 o prop.part() crashed if some trees had some multichotomies.
64 CHANGES IN APE VERSION 2.7-3
69 o The new function compute.brtime computes and sets branching times.
71 o mantel.test() has a new argument 'alternative' which is
72 "two-sided" by default. Previously, this test was one-tailed
73 with no possibility to change.
75 o ace() can now do REML estimation with continuous characters,
76 giving better estimates of the variance of the Brownian motion
82 o Branch lengths were wrongly updated with bind.tree(, where = <tip>,
83 position = 0). (Thanks to Liam Revell for digging this bug out.)
85 o Simulation of OU process with rTraitCont() did not work correctly.
86 This now uses formula from Gillespie (1996) reduced to a BM
87 process when alpha = 0 to avoid division by zero. The option
88 'linear' has been removed.
90 o Cross-validation in chronopl() did not work when 'age.max' was
93 o consensus(, p = 0.5) could return an incorrect tree if some
94 incompatible splits occur in 50% of the trees (especially with
95 small number of trees).
97 o c() with "multiPhylo" did not work correctly (thanks to Klaus
100 o root() failed in some cases with an outgroup made of several tips.
101 The help page has been clarified a bit.
105 CHANGES IN APE VERSION 2.7-2
110 o There is a new class "evonet" to code evolutionary networks, with
111 a constructor function evonet(), a print() and a plot() methods,
112 and four conversion methods to the classes "phylo", "networx",
113 "network", and "igraph".
115 o The new function rTraitMult does multivariate traits simulation
116 with user-defined models.
118 o plot.phylo() has a new option 'plot = TRUE'. If FALSE, the tree
119 is not plotted but the graphical device is set and the
120 coordinates are saved as usual.
122 o diversity.contrast.test() gains a fourth version of the test with
123 method = "logratio"; the literature citations have been clarified.
125 o add.scale.bar() has two new options, 'lwd' and 'lcol', to modify
126 the aspect of the bar.
128 o boot.phylo() now displays a progress bar by default (can be off
131 o There is a new predict() method for compar.gee().
136 o bionj() made R crash if distances were too large. It now returns
137 an error if at least one distance is greater than 100.
139 o drop.tip() returned a wrong tree if 'tip' was of zero length.
141 o read.nexus.data() failed with URLs.
143 o boot.phylo() returned overestimated support values in the
144 presence of identical or nearly identical sequences.
149 o The data bird.families, bird.orders, cynipids, and woodmouse are
150 now provided as .rda files.
154 CHANGES IN APE VERSION 2.7-1
159 o The new function trex does tree exploration with multiple
162 o The new function kronoviz plots several rooted (dated) trees on
165 o identify.phylo() has a new option 'quiet' (FALSE by default).
170 o A bug was introduced in read.nexus() in ape 2.7.
172 o image.DNAbin() did not colour correctly the bases if there were
175 o .compressTipLabel() failed with a list with a single tree.
177 o identify.phylo() returned a wrong answer when the x- and y-scales
180 o write.nexus() failed with lists of trees with compressed labels.
185 o identify.phylo() now returns NULL if the user right-(instead of
186 left-)clicks (an error was returned previously).
188 o read.nexus() should be robust to commands inserted in the TREES
193 CHANGES IN APE VERSION 2.7
198 o There is a new image() method for "DNAbin" objects: it plots DNA
199 alignments in a flexible and efficient way.
201 o Two new functions as.network.phylo and as.igraph.phylo convert
202 trees of class "phylo" into these respective network classes
203 defined in the packages of the same names.
205 o The three new functions clustal, muscle, and tcoffee perform
206 nucleotide sequence alignment by calling the external programs
209 o Four new functions, diversity.contrast.test, mcconwaysims.test,
210 richness.yule.test, and slowinskiguyer.test, implement various
211 tests of diversification shifts using sister-clade comparisons.
213 o base.freq() gains an option 'all' to count all the possible bases
214 including the ambiguous ones (defaults to FALSE).
216 o read.nexus() now writes tree names in the NEXUS file if given a
217 list of trees with names.
222 o prop.part() failed in some situations with unrooted trees.
224 o read.nexus() shuffled node labels when a TRANSLATE block was
227 o varCompPhylip() did not work if 'exec' was specified.
229 o bind.tree() shuffled node labels when position > 0 and 'where'
235 o BaseProportion in src/dist_dna.c has been modified.
237 o A number of functions in src/tree_build.c have been modified.
239 o The matching representation has now only two columns as the third
240 column was redundant.
244 CHANGES IN APE VERSION 2.6-3
249 o rTraitCont() and rTraitDisc() gains a '...' argument used with
250 user-defined models (suggestion by Gene Hunt).
255 o as.hclust.phylo() now returns an error with unrooted trees.
257 o as.hclust.phylo() failed with trees with node labels (thanks to
258 Jinlong Zhang for pointing this bug out).
260 o read.dna(, "fasta") failed if sequences were not all of the same
263 o plot.phylo() did not recycle values of 'font', 'cex' and
264 'tip.color' correctly when type = "fan" or "radial".
266 o plot.phylo() ignored 'label.offset' when type = "radial", "fan", or
267 "unrooted" with lab4ut = "axial" (the placement of tip labels still
268 needs to be improved with lab4ut = "horizontal").
273 o In drop.fossil() the default tol = 0 has been raised to 1e-8.
275 o The help command ?phylo now points to the man page of read.tree()
276 where this class is described. Similarly, ?matching points to the
277 man page of as.matching().
281 CHANGES IN APE VERSION 2.6-2
286 o Two new functions, pic.ortho and varCompPhylip, implements the
287 orthonormal contrasts of Felsenstein (2008, Am Nat, 171:713). The
288 second function requires Phylip to be installed on the computer.
290 o bd.ext() has a new option conditional = TRUE to use probabilities
291 conditioned on no extinction for the taxonomic data.
296 o write.tree() failed to output correctly tree names.
298 o dist.nodes() returned duplicated column(s) with unrooted and/or
299 multichotomous trees.
301 o mcmc.popsize() terminated unexpectedly if the progress bar was
304 o prop.part(x) made R frozen if 'x' is of class "multiPhylo".
306 o Compilation under Mandriva failed (thanks to Jos Käfer for the fix).
308 o drop.tip() shuffled tip labels with subtree = TRUE or trim.internal
311 o Objects returned by as.hclust.phylo() failed when analysed with
312 cutree() or rect.hclust().
314 o write.tree() did not output correctly node labels (thanks to Naim
315 Matasci and Jeremy Beaulieu for the fix).
317 o ace(type = "discrete") has been improved thanks to Naim Marasci and
322 CHANGES IN APE VERSION 2.6-1
327 o The new function speciesTree calculates the species tree from a set
328 of gene trees. Several methods are available including maximum tree
329 and shallowest divergence tree.
334 o A bug introduced in write.tree() with ape 2.6 has been fixed.
336 o as.list.DNAbin() did not work correctly with vectors.
338 o as.hclust.phylo() failed with trees with node labels (thanks to
339 Filipe Vieira for the fix).
343 CHANGES IN APE VERSION 2.6
348 o The new functions rlineage and rbdtree simulate phylogenies under
349 any user-defined time-dependent speciation-extinction model. They
350 use continuous time algorithms.
352 o The new function drop.fossil removes the extinct species from a
355 o The new function bd.time fits a user-defined time-dependent
356 birth-death model. It is a generalization of yule.time() taking
357 extinction into account.
359 o The new function MPR does most parsimonious reconstruction of
362 o The new function Ftab computes the contingency table of base
363 frequencies from a pair of sequences.
365 o There is now an 'as.list' method for the class "DNAbin".
367 o dist.dna() can compute the number of transitions or transversions
368 with the option model = "Ts" or model = "Tv", respectively.
370 o [node|tip|edge]labels() gain three options with default values to
371 control the aspect of thermometers: horiz = TRUE, width = NULL,
374 o compar.gee() has been improved with the new option 'corStruct' as an
375 alternative to 'phy' to specify the correlation structure, and
376 calculation of the QIC (Pan 2001, Biometrics). The display of the
377 results has also been improved.
379 o read.GenBank() has a new option 'gene.names' to return the name of
380 the gene (FALSE by default).
385 o extract.clade() sometimes shuffled the tip labels.
387 o plot.phylo(type = "unrooted") did not force asp = 1 (thanks to Klaus
390 o dist.dna(model = "logdet") used to divide distances by 4. The
391 documentation has been clarified on the formulae used.
396 o rTraitCont(model = "OU") has an option 'linear = TRUE' to possibly
397 change the parameterisation (see ?rTraitCont for details).
399 o pic() now returns a vector with the node labels of the tree (if
402 o write.tree() and read.tree() have been substantially improved thanks
403 to contributions by Klaus Schliep.
407 CHANGES IN APE VERSION 2.5-3
412 o The new function mixedFontLabel helps to make labels with bits of
413 text to be plotted in different fonts.
415 o There are now replacement operators for [, [[, and $ for the class
416 "multiPhylo" (i.e., TREES[11:20] <- rmtree(10, 100)). They possibly
417 check that the tip labels are the same in all trees.
419 o Objects of class "multiPhylo" can be built with c(): there are
420 methods for the classes "phylo" and "multiPhylo".
422 o The internal functions .compressTipLabel and .uncompressTipLabel are
428 o bind.tree(x, y, where, position = 0) did not work correctly if 'y'
429 was a single-edge tree and 'where' was a tip.
431 o rTraitCont() did not use the square-root of branch lengths when
432 simulating a Brownian motion model.
436 CHANGES IN APE VERSION 2.5-2
441 o There is now a print method for results from ace().
443 o There is a labels() method for objects of class "DNAbin".
445 o read.dna() has a new option 'as.matrix' to possibly force sequences
446 in a FASTA file to be stored in a matrix (see ?read.dna for details).
451 o as.phylo.hclust() used to multiply edge lengths by 2.
453 o A minor bug was fixed in rTraitDisc().
455 o ace() sometimes failed (parameter value was NaN and the optimisation
461 o evolve.phylo() and plot.ancestral() have been removed.
463 o chronogram(), ratogram(), and NPRS.criterion() have been removed.
468 o nj() has been improved and is now about 30% faster.
470 o The default option 'drop' of [.DNAbin has been changed to FALSE to
471 avoid dropping rownames when selecting a single sequence.
473 o print.DNAbin() has been changed to summary.DNAbin() which has been
478 CHANGES IN APE VERSION 2.5-1
483 o The new function stree generates trees with regular shapes.
485 o It is now possible to bind two trees with x + y (see ?bind.tree for
488 o drop.tip(), extract.clade(), root(), and bind.tree() now have an
489 'interactive' option to make the operation on a plotted tree.
491 o cophyloplot() gains two new arguments 'lwd' and 'lty' for the
492 association links; they are recycled like 'col' (which wasn't before).
497 o rTraitDisc() did not use its 'freq' argument correctly (it was
498 multiplied with the rate matrix column-wise instead of row-wise).
500 o [node|tip|edge]labels(thermo = ) used to draw empty thermometers
501 with NA values. Nothing is drawn now like with 'text' or 'pch'.
502 The same bug occurred with the 'pie' option.
504 o A bug was fixed in compar.ou() and the help page was clarified.
506 o bind.tree() has been rewritten fixing several bugs and making it
509 o plot.phylo(type = "p") sometimes failed to colour correctly the
510 vertical lines representing the nodes.
512 o plot.phylo(direction = "l", x.lim = 30) failed to plot the branches
513 in the correct direction though the tip labels were displayed
519 o The c, cbind, and rbind methods for "DNAbin" objetcs now check that
520 the sequences are correctly stored (in a list for c, in a matrix
521 for the two other functions).
525 CHANGES IN APE VERSION 2.5
530 o The new function parafit by Pierre Legendre tests for the
531 coevolution between hosts and parasites. It has a companion
532 function, pcoa, that does principal coordinate decomposition.
533 The latter has a biplot method.
535 o The new function lmorigin by Pierre Legendre performs multiple
536 regression through the origin with testing by permutation.
538 o The new functions rTraitCont and rTraitDisc simulate continuous and
539 discrete traits under a wide range of evolutionary models.
541 o The new function delta.plot does a delta plot following Holland et
542 al. (2002, Mol. Biol. Evol. 12:2051).
544 o The new function edges draws additional branches between any nodes
545 and/or tips on a plotted tree.
547 o The new function fancyarrows enhances arrows from graphics with
548 triangle and harpoon heads; it can be called from edges().
550 o add.scale.bar() has a new option 'ask' to draw interactively.
552 o The branch length score replaces the geodesic distance in dist.topo.
554 o Three new data sets are included: the gopher-lice data (gopher.D),
555 SO2 air pollution in 41 US cities (lmorigin.ex1, from Sokal &
556 Rohlf 1995), and some host-parasite specificity data
557 (lmorigin.ex2, from Legendre & Desdevises 2009).
562 o add.scale.bar() drew the bar outside the plotting region with the
563 default options with unrooted or radial trees.
565 o dist.topo() made R stuck when the trees had different sizes (thanks
566 to Otto Cordero for the fix).
571 o The geodesic distance has been replaced by the branch length score
576 CHANGES IN APE VERSION 2.4-1
581 o rtree() and rcoal() now accept a numeric vector for the 'br'
584 o vcv() is a new generic function with methods for the classes "phylo"
585 and "corPhyl" so that it is possible to calculate the var-cov matrix
586 for "transformation models". vcv.phylo() can still be used for trees
587 of class "phylo"; its argument 'cor' has been renamed 'corr'.
592 o bind.tree() failed when 'y' had no root edge.
594 o read.nexus() shuffled tip labels when the trees have no branch
595 lengths and there is a TRANSLATE block.
597 o read.nexus() does not try to translate node labels if there is a
598 translation table in the NEXUS file. See ?read.nexus for a
599 clarification on this behaviour.
601 o plot.multiPhylo() crashed R when plotting a list of trees with
602 compressed tip labels.
604 o write.nexus() did not translate the taxa names when asked for.
606 o plot.phylo(type = "fan") did not rotate the tip labels correctly
607 when the tree has branch lengths.
609 o ace(type = "continuous", method = "ML") now avoids sigma² being
610 negative (which resulted in an error).
612 o nj() crashed with NA/NaN in the distance matrix: an error in now
617 CHANGES IN APE VERSION 2.4
622 o base.freq() has a new option 'freq' to return the counts; the
623 default is still to return the proportions.
628 o seg.sites() did not handle ambiguous nucleotides correctly: they
631 o plot(phy, root.edge = TRUE) failed if there was no $root.edge in
632 the tree: the argument is now ignored.
634 o add.scale.bar() failed when 'x' and 'y' were given (thanks to Janet
640 o Trying to plot a tree with a single tip now returns NULL with a
641 warning (it returned an error previously).
643 o The way lines representing nodes are coloured in phylograms has
644 been modified (as well as their widths and types) following some
645 users' request; this is only for dichotomous nodes.
647 o The argument 'adj' in [node][tip][edge]labels() now works when
648 using 'pie' or 'thermo'.
650 o A more informative message error is now returned by dist.dna() when
651 'model' is badly specified (partial matching of this argument is
654 o Deprecated functions are now listed in a help page: see
655 help("ape-defunct") with the quotes.
660 o The functions heterozygosity, nuc.div, theta.h, theta.k and
661 theta.s have been moved from ape to pegas.
663 o The functions mlphylo, DNAmodel and sh.test have been removed.
667 CHANGES IN APE VERSION 2.3-3
672 o add.scale.bar() always drew a horizontal bar.
674 o zoom() shuffled tips with unrooted trees.
676 o write.nexus() failed to write correctly trees with a "TipLabel"
679 o rcoal() failed to compute branch lengths with very large n.
681 o A small bug was fixed in compar.cheverud() (thanks to Michael
684 o seg.sites() failed when passing a vector.
686 o drop.tip() sometimes shuffled tip labels.
688 o root() shuffled node labels with 'resolve.root = TRUE'.
692 CHANGES IN APE VERSION 2.3-2
697 o all.equal.phylo() did not compare unrooted trees correctly.
699 o dist.topo(... method = "PH85") did not treat unrooted trees
700 correctly (thanks to Tim Wallstrom for the fix).
702 o root() sometimes failed to test for the monophyly of the
705 o extract.clade() sometimes included too many edges.
707 o vcv.phylo() did not work correctly when the tree is in
710 o nj() did not handle correctly distance matrices with many 0's.
711 The code has also been significantly improved: 7, 70, 160 times
712 faster with n = 100, 500, 1000, respectively.
716 CHANGES IN APE VERSION 2.3-1
721 o The new function is.monophyletic tests the monophyly of a group.
723 o There is now a c() method for lists of class "DNAbin".
725 o yule.cov() now fits the null model, and its help page has been
726 corrected with respect to this change.
728 o drop.tip() has a new option 'rooted' to force (or not) a tree
729 to be treated as (un)rooted.
734 o dist.gene() failed on most occasions with the default
735 pairwise.deletion = FALSE.
737 o read.tree() failed to read correctly the tree name(s).
739 o boot.phylo() now treats correctly data frames.
741 o del.gaps() did not copy the rownames of a matrix.
743 o A small bug was fixed in CDAM.global().
745 o ace() failed with large data sets. Thanks to Rich FitzJohn for
746 the fix. With other improvements, this function is now about 6
749 o write.tree() failed with objects of class "multiPhylo".
751 o drop.tip(, subtree = TRUE) sometimes shuffled tip labels.
756 o [.multiPhylo and [.DNAbin now respect the original class.
758 o Instances of the form class(phy) == "phylo" have been replaced
759 by inherits(phy, "phylo").
761 o rcoal() is now faster.
766 o klastorin() has been removed.
770 CHANGES IN APE VERSION 2.3
775 o The new functions CADM.global and CADM.post, contributed by
776 Pierre Legendre, test the congruence among several distance
779 o The new function yule.time fits a user-defined time-dependent
780 Yule model by maximum likelihood.
782 o The new function makeNodeLabel creates and/or modifies node
783 labels in a flexible way.
785 o read.tree() and write.tree() have been modified so that they can
786 handle individual tree names.
788 o plot.phylo() has a new argument 'edge.lty' that specifies the
789 types of lines used for the edges (plain, dotted, dashed, ...)
791 o phymltest() has been updated to work with PhyML 3.0.1.
796 o drop.tip() shuffled tip labels in some cases.
798 o drop.tip() did not handle node.label correctly.
800 o is.ultrametric() now checks the ordering of the edge matrix.
802 o ace() sometimes returned negative values of likelihoods of
803 ancestral states (thanks to Dan Rabosky for solving this long
809 o The data set xenarthra has been removed.
813 CHANGES IN APE VERSION 2.2-4
817 o The bug fix in read.nexus() in version 2.2-3 was wrong: this is
818 now fixed. (Thanks to Peter Wragg for the fix!)
820 o A warning message occurred for no reason with ace(method="GLS").
825 o There is now a general help page displayed with '?ape'.
829 CHANGES IN APE VERSION 2.2-3
834 o The new function extract.clade extracts a clade from a tree by
835 specifying a node number or label.
837 o fastme.bal() has two new options 'spr' and 'tbr' to perform tree
838 operations of the same names.
840 o dist.dna() can now return the number of site differences by
841 specifying model="N".
846 o chronopl() did not work with CV = TRUE.
848 o read.nexus() did not work correctly in some situations (trees on
849 multiple lines with different numbers of lines and/or with
850 comments inserted within the trees).
852 o ltt.plot(), ltt.lines(), and mltt.plot() did not count correctly
853 the number of lineages with non-binary trees.
858 o ape has now a namespace.
860 o drop.tip() has been improved: it should be much faster and work
861 better in some cases (e.g., see the example in ?zoom).
865 CHANGES IN APE VERSION 2.2-2
870 o dist.gene() has been substantially improved and gains an option
873 o cbind.DNAbin() has a new option 'fill.with.gaps' and is now
879 o prop.part() failed with a single tree with the default option
880 'check.labels = TRUE'.
882 o summary.DNAbin() failed to display correctly the summary of
883 sequence lengths with lists of sequences of 10,000 bases or more
884 (because summary.default uses 4 significant digits by default).
886 o read.nexus() failed to read a file with a single tree with line
887 breaks in the Newick string.
889 o del.gaps() returned a list of empty sequences when there were no
895 o phymltest() has been updated for PhyML 3.0 and gains an option
896 'append', whereas the option 'path2exec' has been removed.
898 o rbind.DNAbin() and cbind.DNAbin() now accept a single matrix
899 which is returned unchanged (instead of an error).
901 o The data sets bird.orders and bird.families are now stored as
902 Newick strings; i.e., the command data(bird.orders) calls
907 CHANGES IN APE VERSION 2.2-1
912 o The new function makeLabel() helps to modify labels of trees,
913 lists of trees, or DNA sequences, with several utilities to
914 truncate and/or make them unique, substituting some
915 characters, and so on.
917 o The new function del.gaps() removes insertion gaps ("-") in a
918 set of DNA sequences.
920 o read.dna() can now read Clustal files (*.aln).
925 o root() failed with 'resolve.root = TRUE' when the root was
926 already the specified root.
928 o Several bugs were fixed in mlphylo().
930 o collapsed.singles() did not propagate the 'Nnode' and
931 'node.labels' elements (thanks to Elizabeth Purdom for the fix).
933 o read.nexus() failed to remove correctly the comments within
936 o read.nexus() failed to read a file with a single tree and no
937 translation of tip labels.
939 o read.nexus() failed to place correctly tip labels when reading
940 a single tree with no edge lengths.
942 o A bug was fixed in sh.test().
947 o unique.multiPhylo() is faster thanks to a suggestion by Vladimir
950 o The option 'check.labels' of consensus() and prop.part() is now
953 o write.dna() now does not truncate names to 10 characters with
958 CHANGES IN APE VERSION 2.2
963 o Four new functions have been written by Damien de Vienne for the
964 graphical exploration of large trees (cophyloplot, subtrees,
965 subtreeplot), and to return the graphical coordinates of tree
968 o The new functions corPagel and corBlomberg implement the Pagel's
969 "lambda" and Blomberg et al.'s "ACDC" correlation structures.
971 o chronopl() has been improved and gains several options: see its
972 help page for details.
974 o boot.phylo() has now an option 'trees' to possibly return the
975 bootstraped trees (the default is FALSE).
977 o prop.part() has been improved and should now be faster in all
983 o read.dna() failed if "?" occurred in the first 10 sites of the
986 o The x/y aspect of the plot is now respected when plotting a
987 circular tree (type = "r" or "f").
989 o Drawing the tip labels sometimes failed when plotting circular
992 o zoom() failed when tip labels were used instead of their numbers
993 (thanks to Yan Wong for the fix).
995 o drop.tip() failed with some trees (fixed by Yan Wong).
997 o seg.sites() failed with a list.
999 o consensus() failed in some cases. The function has been improved
1000 as well and is faster.
1004 CHANGES IN APE VERSION 2.1-3
1009 o A bug in read.nexus() made the Windows R-GUI crash.
1011 o An error was fixed in the computation of ancestral character
1012 states by generalized least squares in ace().
1014 o di2multi() did not modify node labels correctly.
1016 o multi2di() failed if the tree had its attribute "order" set to
1021 CHANGES IN APE VERSION 2.1-2
1026 o There three new methods for the "multiPhylo" class: str, $,
1029 o root() gains the options 'node' and 'resolve.root'
1030 (FALSE by default) as well as its code being improved.
1032 o mltt.plot() has now an option 'log' used in the same way
1033 than in plot.default().
1038 o mltt.plot() failed to display the legend with an unnamed
1041 o nodelabels() with pies now correcly uses the argument
1042 'cex' to draw symbols of different sizes (which has
1043 worked already for thermometers).
1045 o read.nexus() generally failed to read very big files.
1050 o The argument 'family' of compar.gee() can now be a function
1051 as well as a character string.
1053 o read.tree() and read.nexus() now return an unnamed list if
1054 'tree.names = NULL'.
1056 o read.nexus() now returns a modified object of class "multiPhylo"
1057 when there is a TRANSLATE block in the NEXUS file: the individual
1058 trees have no 'tip.label' vector, but the list has a 'TipLabel'
1059 attribute. The new methods '$' and '[[' set these elements
1060 correctly when extracting trees.
1064 CHANGES IN APE VERSION 2.1-1
1069 o The new function rmtree generates lists of random trees.
1071 o rcoal() now generates a genuine coalescent tree by default
1072 (thanks to Vladimir Minin for the code).
1077 o nuc.div() returned an incorrect value with the default
1078 pairwise.deletion = FALSE.
1083 o The internal codes of bionj(), fastme.bal(), and fastme.ols()
1084 have been improved so that they are stabler and faster.
1086 o R packages used by ape are now loaded silently; lattice and gee
1087 are loaded only when needed.
1091 CHANGES IN APE VERSION 2.1
1096 o The new function identify.phylo identifies clades on a plotted
1097 tree using the mouse.
1099 o It is now possible to subset a list of trees (object of class
1100 "multiPhylo") with "[" while keeping its class correct.
1102 o The new function as.DNAbin.alignment converts DNA sequences
1103 stored in the "alignment" format of the package seqinr into
1104 an object of class "DNAbin".
1106 o The new function weight.taxo2 helps to build similarity matrices
1107 given two taxonomic levels (usually called by other functions).
1109 o write.tree() can now take a list of trees (class "multiPhylo")
1110 as its main argument.
1112 o plot.correlogram() and plot.correlogramList() have been
1113 improved, and gain several options (see the help page for
1114 details). A legend is now plotted by default.
1119 o dist.dna() returned some incorrect values with `model = "JC69"'
1120 and `pairwise.deletion = TRUE'. This affected only the
1121 distances involving sequences with missing values. (Thanks
1122 to Bruno Toupance for digging this bug out.)
1124 o write.tree() failed with some trees: this is fixed by removing
1125 the `multi.line' option (trees are now always printed on a
1128 o read.nexus() did not correctly detect trees with multiple root
1129 edges (see OTHER CHANGES).
1134 o The code of mlphylo() has been almost entirely rewritten, and
1135 should be much stabler. The options have been also greatly
1136 simplified (see ?mlphylo and ?DNAmodel for details).
1138 o The internal function nTips has been renamed klastorin_nTips.
1140 o The code of is.ultrametric() contained redundancies and has
1143 o The code of Moran.I() and of correlogram.formula() have been
1146 o read.tree() and read.nexus() now return an error when trying to
1147 read a tree with multiple root edges (see BUG FIXES). The
1148 correction applied in previous version did not work in all
1151 o The class c("multi.tree", "phylo") has been renamed
1157 o There is now a vignette in ape: see vignette("MoranI", "ape").
1160 DEPRECATED & DEFUNCT
1162 o as.matching() and as.phylo.matching() do not support branch
1165 o correlogram.phylo() and discrete.dist() have been removed.
1169 CHANGES IN APE VERSION 2.0-2
1174 o The new function matexpo computes the exponential of a square
1177 o The new function unique.multi.tree removes duplicate trees from
1180 o yule() has a new option `use.root.edge = FALSE' that specifies
1181 to ignore, by default, the root edge of the tree if it exists.
1186 o which.edge() failed when the index of a single terminal edge was
1189 o In diversi.time(), the values returned for model C were
1192 o A bug was fixed in yule() that affected the calculation of the
1193 likelihood in the presence of ties in the branching times.
1195 o There was a bug in the C function mat_expo4x4 affecting the
1196 calculations of the transition probabilities for models HKY and
1199 o A small bug was fixed in as.matrix.DNAbin (thanks to James
1202 o rtree() did not `shuffle' the tip labels by default, so only a
1203 limited number of labelled topologies could be generated.
1207 CHANGES IN APE VERSION 2.0-1
1212 o The three new functions bionj, fastme.ols, and fastme.bal
1213 perform phylogeny estimation by the BIONJ and fastME methods in
1214 OLS and balanced versions. This is a port to R of previous
1215 previous programs done by Vincent Lefort.
1217 o The new function chronoMPL performs molecular dating with the
1218 mean path lengths method of Britton et al. (2002, Mol. Phyl.
1221 o The new function rotate, contributed by Christoph Heibl, swaps
1222 two clades connected to the same node. It works also with
1223 multichotomous nodes.
1225 o The new `method' as.matrix.DNAbin() may be used to convert
1226 easily DNA sequences stored in a list into a matrix while
1227 keeping the names and the class.
1232 o chronopl() failed when some branch lengths were equal to zero:
1233 an error message is now returned.
1235 o di2multi() failed when there was a series of consecutive edges
1240 CHANGES IN APE VERSION 1.10-2
1245 o plot.phylo() can now plot circular trees: the option is type =
1246 "fan" or type = "f" (to avoid the ambiguity with type = "c").
1248 o prop.part() has a new option `check.labels = FALSE' which allows
1249 to considerably speed-up the calculations of bipartitions. As a
1250 consequence, calculations of bootstrap values with boot.phylo()
1251 should be much faster.
1256 o read.GenBank() did not return correctly the list of species as
1257 from ape 1.10: this is fixed in this version
1259 o Applying as.phylo() on a tree of class "phylo" failed: the
1260 object is now returned unchanged.
1264 CHANGES IN APE VERSION 1.10-1
1269 o The three new functions Ntip, Nnode, and Nedge return, for a
1270 given tree, the number of tips, nodes, or edges, respectively.
1275 o read.nexus() did not set correctly the class of the returned
1276 object when reading multiple trees.
1278 o mllt.plot() failed with objects of class c("multi.tree",
1281 o unroot() did not work correctly in most cases.
1283 o reorder.phylo() made R freeze in some occasions.
1285 o Plotting a tree in pruningwise order failed.
1287 o When plotting an unrooted tree, the tip labels where not all
1288 correctly positioned if the option `cex' was used.
1292 CHANGES IN APE VERSION 1.10
1297 o Five new `method' functions have been introduced to manipulate
1298 DNA sequences in binary format (see below).
1300 o Three new functions have been introduced to convert between the
1301 new binary and the character formats.
1303 o The new function as.alignment converts DNA sequences stored as
1304 single characters into the class "alignment" used by the package
1307 o read.dna() and read.GenBank() have a new argument `as.character'
1308 controlling whether the sequences are returned in binary format
1314 o root() failed when the tree had node labels: this is fixed.
1316 o plot.phylo() did not correctly set the limits on the y-axis with
1317 the default setting: this is fixed.
1319 o dist.dna() returned a wrong result for the LogDet, paralinear,
1320 and BH87 models with `pairwise.deletion = TRUE'.
1325 o DNA sequences are now internally stored in a binary format. See
1326 the document "A Bit-Level Coding Scheme for Nucleotides" for the
1327 details. Most functions analyzing DNA functions have been
1328 modified accordingly and are now much faster (dist.dna is now
1329 ca. 60 times faster).
1333 CHANGES IN APE VERSION 1.9-4
1338 o A bug was fixed in edgelabels().
1340 o as.phylo.hclust() did not work correctly when the object of
1341 class "hclust" has its labels set to NULL: the returned tree has
1342 now its tip labels set to "1", "2", ...
1344 o consensus could fail if some tip labels are a subset of others
1345 (e.g., "a" and "a_1"): this is now fixed.
1347 o mlphylo() failed in most cases if some branch lengths of the
1348 initial tree were greater than one: an error message is now
1351 o mlphylo() failed in most cases when estimating the proportion of
1352 invariants: this is fixed.
1356 CHANGES IN APE VERSION 1.9-3
1361 o The new function edgelabels adds labels on the edge of the tree
1362 in the same way than nodelabels or tiplabels.
1367 o multi2di() did not handle correctly branch lengths with the
1368 default option `random = TRUE': this is now fixed.
1370 o A bug was fixed in nuc.div() when using pairwise deletions.
1372 o A bug occurred in the analysis of bipartitions with large
1373 numbers of large trees, with consequences on prop.part,
1374 prop.clades, and boot.phylo.
1376 o The calculation of the Billera-Holmes-Vogtmann distance in
1377 dist.topo was wrong: this has been fixed.
1381 CHANGES IN APE VERSION 1.9-2
1386 o The new function ladderize reorganizes the internal structure of
1387 a tree to plot them left- or right-ladderized.
1389 o The new function dist.nodes computes the patristic distances
1390 between all nodes, internal and terminal, of a tree. It replaces
1391 the option `full = TRUE' of cophenetic.phylo (see below).
1396 o A bug was fixed in old2new.phylo().
1398 o Some bugs were fixed in chronopl().
1400 o The edge colours were not correctly displayed by plot.phylo
1401 (thank you to Li-San Wang for the fix).
1403 o cophenetic.phylo() failed with multichotomous trees: this is
1409 o read.dna() now returns the sequences in a matrix if they are
1410 aligned (interleaved or sequential format). Sequences in FASTA
1411 format are still returned in a list.
1413 o The option `full' of cophenetic.phylo() has been removed because
1414 it could not be used from the generic.
1417 DEPRECATED & DEFUNCT
1419 o rotate() has been removed; this function did not work correctly
1424 CHANGES IN APE VERSION 1.9-1
1429 o Trees with a single tip were not read correctly in R as the
1430 element `Nnode' was not set: this is fixed.
1432 o unroot() did not set correctly the number of nodes of the
1433 unrooted tree in most cases.
1435 o read.GenBank() failed when fetching very long sequences,
1436 particularly of the BX-series.
1438 o A bug was introduced in read.tree() with ape 1.9: it has been
1443 CHANGES IN APE VERSION 1.9
1448 o There are two new print `methods' for trees of class "phylo" and
1449 lists of trees of class "multi.tree", so that they are now
1450 displayed in a compact and informative way.
1452 o There are two new functions, old2new.phylo and new2old.phylo,
1453 for converting between the old and new coding of the class
1456 o dist.dna() has three new models: Barry and Hartigan ("BH87"),
1457 LogDet ("logdet"), and paralinear ("paralin").
1459 o compute.brlen() has been extended: several methods are now
1460 available to compute branch lengths.
1462 o write.dna() can now handle matrices as well as lists.
1467 o cophenetic.phylo() sometimes returned a wrong result with
1468 multichotomous trees: this is fixed.
1470 o rotate() failed when a single tip was specified: the tree is now
1473 o ace() did not return the correct index matrix with custom
1474 models: this is fixed.
1476 o multi2di() did not work correctly when resolving multichotomies
1477 randomly: the topology was always the same, only the arrangement
1478 of clades was randomized: this is fixed. This function now
1479 accepts trees with no branch lengths.
1481 o The output of diversi.gof() was blurred by useless prints when a
1482 user distribution was specified. This has been corrected, and
1483 the help page of this function has been expanded.
1488 o The internal structure of the class "phylo" has been changed:
1489 see the document "Definition of Formats for Coding Phylogenetic
1490 Trees in R" for the details. In addition, the code of most
1491 functions has been improved.
1493 o Several functions have been improved by replacing some R codes
1494 by C codes: pic, plot.phylo, and reorder.phylo.
1496 o There is now a citation information: see citation("ape") in R.
1498 o write.tree() now does not add extra 0's to branch lengths so
1499 that 1.23 is printed "1.23" by default, not "1.2300000000".
1501 o The syntax of bind.tree() has been simplified. This function now
1502 accepts trees with no branch lengths, and handles correctly node
1505 o The option `as.numeric' of mrca() has been removed.
1507 o The unused options `format' and `rooted' of read.tree() have
1510 o The unused option `format' of write.tree() has been removed.
1512 o The use of node.depth() has been simplified.
1516 CHANGES IN APE VERSION 1.8-5
1521 o Two new functions read.nexus.data() and write.nexus.data(),
1522 contributed by Johan Nylander, allow to read and write molecular
1523 sequences in NEXUS files.
1525 o The new function reorder.phylo() reorders the internal structure
1526 of a tree of class "phylo". It is used as the generic, e.g.,
1529 o read.tree() and read.nexus() can now read trees with a single
1532 o The new data set `cynipids' supplies a set of protein sequences
1538 o The code of all.equal.phylo() has been completely rewritten
1539 (thanks to Benoît Durand) which fixes several bugs.
1541 o read.tree() and read.nexus() now checks the labels of the tree
1542 to remove or substitute any characters that are illegal in the
1543 Newick format (parentheses, etc.)
1545 o A negative P-value could be returned by mantel.test(): this is
1550 CHANGES IN APE VERSION 1.8-4
1555 o The new function sh.test() computes the Shimodaira-
1558 o The new function collapse.singles() removes the nodes with a
1559 single descendant from a tree.
1561 o plot.phylo() has a new argument `tip.color' to specify the
1562 colours of the tips.
1564 o mlphylo() has now an option `quiet' to control the display of
1565 the progress of the analysis (the default is FALSE).
1570 o read.dna() did not read correctly sequences in sequential format
1571 with leading alignment gaps "-": this is fixed.
1573 o ace() returned a list with no class so that the generic
1574 functions (anova, logLik, ...) could not be used directly. This
1575 is fixed as ace() now returns an object of class "ace".
1577 o anova.ace() had a small bug when computing the number of degrees
1578 of freedom: this is fixed.
1580 o mlphylo() did not work when the sequences were in a matrix or
1581 a data frame: this is fixed.
1583 o rtree() did not work correctly when trying to simulate an
1584 unrooted tree with two tips: an error message is now issued.
1589 o The algorithm of rtree() has been changed: it is now about 40,
1590 100, and 130 times faster for 10, 100, and 1000 tips,
1595 CHANGES IN APE VERSION 1.8-3
1600 o There are four new `method' functions to be used with the
1601 results of ace(): logLik(), deviance(), AIC(), and anova().
1603 o The plot method of phymltest has two new arguments: `main' to
1604 change the title, and `col' to control the colour of the
1605 segments showing the AIC values.
1607 o ace() has a new argument `ip' that gives the initial values used
1608 in the ML estimation with discrete characters (see the examples
1609 in ?ace). This function now returns a matrix giving the indices
1610 of the estimated rates when analysing discrete characters.
1612 o nodelabels() and tiplabels() have a new argument `pie' to
1613 represent proportions, with any number of categories, as
1614 piecharts. The use of the option `thermo' has been improved:
1615 there is now no limitation on the number of categories.
1620 o mlphylo() did not work with more than two partitions: this is
1623 o root() failed if the proposed outgroup was already an outgroup
1624 in the tree: this is fixed.
1626 o The `col' argument in nodelabels() and tiplabels() was not
1627 correctly passed when `text' was used: this is fixed.
1629 o Two bugs were fixed in mlphylo(): parameters were not always
1630 correctly output, and the estimation failed in some cases.
1632 o plot.phylo() was stuck when given a tree with a single tip: this
1633 is fixed and a message error is now returned.
1635 o An error was corrected in the help page of gammaStat regarding
1636 the calculation of P-values.
1638 o Using gls() could crash R when the number of species in the tree
1639 and in the variables were different: this is fixed.
1643 CHANGES IN APE VERSION 1.8-2
1648 o The new function mlphylo() fits a phylogenetic tree by maximum
1649 likelihood from DNA sequences. Its companion function DNAmodel()
1650 is used to define the substitution model which may include
1651 partitioning. There are methods for logLik(), deviance(), and
1652 AIC(), and the summary() method has been extended to display in
1653 a friendly way the results of this model fitting. Currently, the
1654 functionality is limited to estimating the substitution and
1655 associated parameters and computing the likelihood.
1657 o The new function drop1.compar.gee (used as, e.g., drop1(m))
1658 tests for single effects in GEE-based comparative method. A
1659 warning message is printed if there is not enough degrees of
1665 o An error message was sometimes issued by plot.multi.tree(),
1666 though with no consequence.
1670 CHANGES IN APE VERSION 1.8-1
1675 o There is a new plot method for lists of trees (objects of class
1676 "multi.tree"): it calls plot.phylo() internally and is
1677 documented on the same help page.
1682 o A bug was fixed in the C code that analyzes bipartitions: this
1683 has impact on several functions like prop.part, prop.clades,
1684 boot.phylo, or consensus.
1686 o root() did not work correctly when the specified outgroup had
1687 more than one element: this is fixed.
1689 o dist.dna() sometimes returned a warning inappropriately: this
1692 o If the distance object given to nj() had no rownames, nj()
1693 returned a tree with no tip labels: it now returns tips labelled
1694 "1", "2", ..., corresponding to the row numbers.
1699 o nj() has been slightly changed so that tips with a zero distance
1700 are first aggregated with zero-lengthed branches; the usual NJ
1701 procedure is then performed on a distance matrix without 0's.
1705 CHANGES IN APE VERSION 1.8
1710 o The new function chronopl() estimates dates using the penalized
1711 likelihood method by Sanderson (2002; Mol. Biol. Evol., 19:101).
1713 o The new function consensus() calculates the consensus tree of a
1716 o The new function evolve.phylo() simulates the evolution of
1717 continuous characters along a phylogeny under a Brownian model.
1719 o The new plot method for objects of class "ancestral" displays a
1720 tree together with ancestral values, as returned by the above
1723 o The new function as.phylo.formula() returns a phylogeny from a
1724 set of nested taxonomic variables given as a formula.
1726 o The new function read.caic() reads trees in CAIC format.
1728 o The new function tiplabels() allows to add labels to the tips
1729 of a tree using text or plotting symbols in a flexible way.
1731 o The new function unroot() unroots a phylogeny.
1733 o multi2di() has a new option, `random', which specifies whether
1734 to resolve the multichotomies randomly (the default) or not.
1736 o prop.part() now returns an object of class "prop.part" for which
1737 there are print (to display a partition in a more friendly way)
1738 and summary (to extract the numbers) methods.
1740 o plot.phylo() has a new option, `show.tip.label', specifying
1741 whether to print the labels of the tips. The default is TRUE.
1743 o The code of nj() has been replaced by a faster C code: it is now
1744 about 10, 25, and 40 times faster for 50, 100, and 200 taxa,
1747 o write.nexus() now writes whether a tree is rooted or not.
1752 o Two bugs have been fixed in root(): unrooted trees are now
1753 handled corretly, and node labels are now output normally.
1755 o A bug was fixed in phymltest(): the executable couldn't be found
1758 o Three bug have been fixed in ace(): computing the likelihood of
1759 ancestral states of discrete characters failed, custom models
1760 did not work, and the function failed with a null gradient (a
1761 warning message is now returned; this latter bug was also
1762 present in yule.cov() as well and is now fixed).
1764 o pic() hanged out when missing data were present: a message error
1767 o A small bug was fixed in dist.dna() where the gamma correction
1768 was not always correctly dispatched.
1770 o plot.phylo() plotted correctly the root edge only when the tree
1771 was plotted rightwards: this works now for all directions.
1776 o dist.taxo() has been renamed as weight.taxo().
1778 o dist.phylo() has been replaced by the method cophenetic.phylo().
1780 o Various error and warning messages have been improved.
1784 CHANGES IN APE VERSION 1.7
1787 o The new function ace() estimates ancestral character states for
1788 continuous characters (with ML, GLS, and contrasts methods), and
1789 discrete characters (with ML only) for any number of states.
1791 o The new function compar.ou() fits the Ornstein-Uhlenbeck model
1792 of directional evolution for continuous characters. The user
1793 specifies the node(s) of the tree where the character optimum
1796 o The new function is.rooted() tests whether a tree (of class
1799 o The new function rcoal() generates random ultrametric trees with
1800 the possibility to specify the function that generates the
1801 inter-nodes distances.
1803 o The new function mrca() gives for all pairs of tips in a tree
1804 (and optionally nodes too) the most recent common ancestor.
1806 o nodelabels() has a new option `thermo' to plot proportions (up
1807 to three classes) on the nodes of a tree.
1809 o rtree() has been improved: it can now generate rooted or
1810 unrooted trees, and the mathematical function that generates the
1811 branch lengths may be specified by the user. The tip labels may
1812 be given directly in the call to rtree. The limit cases (n = 2,
1813 3) are now handled correctly.
1815 o dist.topo() has a new argument `method' with two choices: "PH85"
1816 for Penny and Henny's method (already available before and now
1817 the default), and "BHV01" for the geometric distance by Billera
1818 et al. (2001, Adv. Appl. Math. 27:733).
1820 o write.tree() has a new option, `digits', which specifies the
1821 number of digits to be printed in the Newick tree. By default
1822 digits = 10. The numbers are now always printed in decimal form
1823 (i.e., 1.0e-1 is now avoided).
1825 o dist.dna() can now compute the raw distances between pairs of
1826 DNA sequences by specifying model = "raw".
1828 o dist.phylo() has a new option `full' to possibly compute the
1829 distances among all tips and nodes of the tree. The default if
1835 o Several bugs were fixed in all.equal.phylo().
1837 o dist.dna() did not handle correctly gaps ("-") in alignments:
1838 they are now considered as missing data.
1840 o rotate() did not work if the tips were not ordered: this is
1843 o mantel.test() returned NA in some special cases: this is fixed
1844 and the function has been improved and is now faster.
1846 o A bug was fixed in diversi.gof() where the calculation of A² was
1849 o cherry() did not work correctly under some OSs (mainly Linux):
1852 o is.binary.tree() has been modified so that it works with both
1853 rooted and unrooted trees.
1855 o The documentation of theta.s() was not correct: this has been
1858 o plot.mst() did not work correctly: this is fixed.
1862 CHANGES IN APE VERSION 1.6
1867 o The new function dist.topo() computes the topological distances
1870 o The new function boot.phylo() performs a bootstrap analysis on
1871 phylogeny estimation.
1873 o The new functions prop.part() and prop.clades() analyse
1874 bipartitions from a series of trees.
1879 o read.GenBank() now uses the EFetch utility of NCBI instead of
1880 the usual Web interface: it is now much faster (e.g., 12 times
1881 faster to retrieve 8 sequences, 37 times for 60 sequences).
1886 o Several bugs were fixed in read.dna().
1888 o Several bugs were fixed in diversi.time().
1890 o is.binary.tree() did not work correctly if the tree has no edge
1891 lengths: this is fixed.
1893 o drop.tip() did not correctly propagated the `node.label' of a
1894 tree: this is fixed.
1898 CHANGES IN APE VERSION 1.5
1903 o Two new functions, as.matching.phylo() and as.phylo.matching(),
1904 convert objects between the classes "phylo" and "matching". The
1905 latter implements the representation of binary trees introduced by
1906 Diaconis and Holmes (1998; PNAS 95:14600). The generic function
1907 as.matching() has been introduced as well.
1909 o Two new functions, multi2di() and di2multi(), allow to resolve
1910 and collapse multichotomies with branches of length zero.
1912 o The new function nuc.div() computes the nucleotide diversity
1913 from a sample a DNA sequences.
1915 o dist.dna() has been completely rewritten with a much faster
1916 (particularly for large data sets) C code. Eight models are
1917 available: JC69, K80, F81, K81, F84, T92, TN93, and GG95 (the
1918 option `method' has been renamed `model'). Computation of variance
1919 is available for all models. A gamma-correction is possible for
1920 JC69, K80, F81, and TN93. There is a new option, pairwise.deletion,
1921 to remove sites with missing data on a pairwise basis. The option
1922 `GCcontent' has been removed.
1924 o read.GenBank() has a new option (species.names) which specifies
1925 whether to return the species names of the organisms in addition
1926 to the accession numbers of the sequences (this is the default
1929 o write.nexus() can now write several trees in the same NEXUS file.
1931 o drop.tip() has a new option `root.edge' that allows to specify the
1932 new root edge if internal branches are trimmed.
1937 o as.phylo.hclust() failed if some labels had parentheses: this
1940 o Several bugs were fixed in all.equal.phylo(). This function now
1941 returns the logical TRUE if the trees are identical but with
1942 different representations (a report was printed previously).
1944 o read.GenBank() did not correctly handle ambiguous base codes:
1950 o birthdeath() now returns an object of class "birthdeath" for
1951 which there is a print method.
1955 CHANGES IN APE VERSION 1.4
1960 o The new function nj() performs phylogeny estimation with the
1961 neighbor-joining method of Saitou and Nei (1987; Mol. Biol.
1964 o The new function which.edge() identifies the edges of a tree
1965 that belong to a group specified as a set of tips.
1967 o The new function as.phylo.phylog() converts an object of class
1968 "phylog" (from the package ade4) into an object of class
1971 o The new function axisPhylo() draws axes on the side of a
1974 o The new function howmanytrees() calculates the number of trees
1975 in different cases and giving a number of tips.
1977 o write.tree() has a new option `multi.line' (TRUE by default) to
1978 write a Newick tree on several lines rather than on a single
1981 o The functionalities of zoom() have been extended. Several
1982 subtrees can be visualized at the same time, and they are marked
1983 on the main tree with colors. The context of the subtrees can be
1984 marked with the option `subtree' (see below).
1986 o drop.tip() has a new option `subtree' (FALSE by default) which
1987 specifies whether to output in the tree how many tips have been
1990 o The arguments of add.scale.bar() have been redefined and have
1991 now default values (see ?add.scale.bar for details). This
1992 function now works even if the plotted tree has no edge length.
1994 o plot.phylo() can now plot radial trees, but this does not take
1995 edge lengths into account.
1997 o In plot.phylo() with `type = "phylogram"', if the values of
1998 `edge.color' and `edge.width' are identical for sister-branches,
1999 they are propagated to the vertical line that link them.
2004 o Repeated calls to as.phylo.hclust() or as.hclust.phylo() made R
2005 crashing. This is fixed.
2007 o In plot.phylo(), the options `edge.color' and `edge.width' are
2008 now properly recycled; their default values are now "black" and
2011 o A bug has been fixed in write.nexus().
2016 o The function node.depth.edgelength() has been removed and
2017 replaced by a C code.
2021 CHANGES IN APE VERSION 1.3-1
2026 o The new function nodelabels() allows to add labels to the nodes
2027 of a tree using text or plotting symbols in a flexible way.
2029 o In plot.phylo() the arguments `x.lim' and `y.lim' can now be two
2030 numeric values specifying the lower and upper limits on the x-
2031 and y-axes. This allows to leave some space on any side of the
2032 tree. If a single value is given, this is taken as the upper
2037 CHANGES IN APE VERSION 1.3
2042 o The new function phymltest() calls the software PHYML and fits
2043 28 models of DNA sequence evolution. There are a print method to
2044 display likelihood and AIC values, a summary method to compute
2045 the hierarchical likelihood ratio tests, and a plot method to
2046 display graphically the AIC values of each model.
2048 o The new function yule.cov() fits the Yule model with covariates,
2049 a model where the speciation rate is affected by several species
2050 traits through a generalized linear model. The parameters are
2051 estimated by maximum likelihood.
2053 o Three new functions, corBrownian(), corGrafen(), and
2054 corMartins(), compute the expected correlation structures among
2055 species given a phylogeny under different models of evolution.
2056 These can be used for GLS comparative phylogenetic methods (see
2057 the examples). There are coef() and corMatrix() methods and an
2058 Initialize.corPhyl() function associated.
2060 o The new function compar.cheverud() implements Cheverud et al.'s
2061 (1985; Evolution 39:1335) phylogenetic comparative method.
2063 o The new function varcomp() estimates variance components; it has
2066 o Two new functions, panel.superpose.correlogram() and
2067 plot.correlogramList(), allow to plot several phylogenetic
2070 o The new function node.leafnumber() computes the number of leaves
2071 of a subtree defined by a particular node.
2073 o The new function node.sons() gets all tags of son nodes from a
2076 o The new function compute.brlen() computes the branch lengths of
2077 a tree according to a specified method.
2079 o plot.phylo() has three new options: "cex" controls the size of
2080 the (tip and node) labels (thus it is no more needed to change
2081 the global graphical parameter), "direction" which allows to
2082 plot the tree rightwards, leftwards, upwards, or downwards, and
2083 "y.lim" which sets the upper limit on the y-axis.
2088 o Some functions which try to match tip labels and names of
2089 additional data (e.g. vector) are likely to fail if there are
2090 typing or syntax errors. If both series of names do not perfectly
2091 match, they are ignored and a warning message is now issued.
2092 These functions are bd.ext, compar.gee, pic. Their help pages
2093 have been clarified on this point.
2097 CHANGES IN APE VERSION 1.2-7
2102 o The new function root() reroots a phylogenetic tree with respect
2103 to a specified outgroup.
2105 o The new function rotate() rotates an internal branch of a tree.
2107 o In plot.phylo(), the new argument "lab4ut" (labels for unrooted
2108 trees) controls the display of the tip labels in unrooted trees.
2109 This display has been greatly improved: the tip labels are now not
2110 expected to overlap with the tree (particularly if lab4ut =
2111 "axial"). In all cases, combining appropriate values of "lab4ut"
2112 and the font size (via "par(cex = )") should result in readable
2113 unrooted trees. See ?plot.phylo for some examples.
2115 o In drop.tip(), the argument `tip' can now be numeric or character.
2120 o drop.tip() did not work correctly with trees with no branch
2121 lengths: this is fixed.
2123 o A bug in plot.phylo(..., type = "unrooted") made some trees being
2124 plotted with some line crossings: this is now fixed.
2128 CHANGES IN APE VERSION 1.2-6
2133 o Six new functions (Moran.I, correlogram.formula, discrete.dist,
2134 correlogram.phylo, dist.taxo, plot.correlogram) have been added
2135 to implement comparative methods with an autocorrelation approach.
2137 o A new data set describing some life history traits of Carnivores
2143 o A fix was made on mcmc.popsize() to conform to R 2.0.0.
2148 o When plotting a tree with plot.phylo(), the new default of the
2149 option `label.offset' is now 0, so the labels are always visible.
2153 CHANGES IN APE VERSION 1.2-5
2158 o The new function bd.ext() fits a birth-death model with combined
2159 phylogenetic and taxonomic data, and estimates the corresponding
2160 speciation and extinction rates.
2165 o The package gee is no more required by ape but only suggested
2166 since only the function compar.gee() calls gee.
2170 CHANGES IN APE VERSION 1.2-4
2175 o Four new functions (mcmc.popsize, extract.popsize, plot.popsize,
2176 and lines.popsize) implementing a new approach for inferring the
2177 demographic history from genealogies using a reversible jump
2178 MCMC have been introduced.
2180 o The unit of time in the skyline plot and in the new plots can
2181 now be chosen to be actual years, rather than substitutions.
2185 CHANGES IN APE VERSION 1.2-3
2190 o The new function rtree() generates a random binary tree with or
2191 without branch lengths.
2193 o Two new functions for drawing lineages-through-time (LTT) plots
2194 are provided: ltt.lines() adds a LTT curve to an existing plot,
2195 and mltt.plot() does a multiple LTT plot giving several trees as
2196 arguments (see `?ltt.plot' for details).
2201 o Some taxon names made R crashing when calling as.phylo.hclust():
2204 o dist.dna() returned an error with two identical DNA sequences
2205 (only using the Jukes-Cantor method returned 0): this is fixed.
2210 o The function dist.phylo() has been re-written using a different
2211 algorithm: it is now about four times faster.
2213 o The code of branching.times() has been improved: it is now about
2218 CHANGES IN APE VERSION 1.2-2
2223 o The new function seg.sites() finds the segregating sites in a
2224 sample of DNA sequences.
2229 o A bug introduced in read.tree() and in read.nexus() with version
2232 o A few errors were corrected and a few examples were added in the
2237 CHANGES IN APE VERSION 1.2-1
2242 o plot.phylo() can now draw the edge of the root of a tree if it
2243 has one (see the new option `root.edge', its default is FALSE).
2248 o A bug was fixed in read.nexus(): files with semicolons inside
2249 comment blocks were not read correctly.
2251 o The behaviour of read.tree() and read.nexus() was corrected so
2252 that tree files with badly represented root edges (e.g., with
2253 an extra pair of parentheses, see the help pages for details)
2254 are now correctly represented in the object of class "phylo";
2255 a warning message is now issued.
2259 CHANGES IN APE VERSION 1.2
2264 o plot.phylo() has been completely re-written and offers several
2265 new functionalities. Three types of trees can now be drawn:
2266 phylogram (as previously), cladogram, and unrooted tree; in
2267 all three types the branch lengths can be drawn using the edge
2268 lengths of the phylogeny or not (e.g., if the latter is absent).
2269 The vertical position of the nodes can be adjusted with two
2270 choices (see option `node.pos'). The code has been re-structured,
2271 and two new functions (potentially useful for developpers) are
2272 documented separately: node.depth.edgelength() and node.depth();
2273 see the respective help pages for details.
2275 o The new function zoom() allows to explore very large trees by
2276 focusing on a small portion of it.
2278 o The new function yule() fits by maximum likelihood the Yule model
2279 (birth-only process) to a phylogenetic tree.
2281 o Support for writing DNA sequences in FASTA format has been
2282 introduced in write.dna() (support for reading sequences in
2283 this format was introduced in read.dna() in version 1.1-2).
2284 The function has been completely re-written, fixing some bugs
2285 (see below); the default behaviour is no more to display the
2286 sequences on the standard output. Several options have been
2287 introduced to control the sequence printing in a flexible
2288 way. The help page has been extended.
2290 o A new data set is included: a supertree of bats in NEXUS format.
2295 o In theta.s(), the default of the option `variance' has
2296 been changed to `FALSE' (as was indicated in the help page).
2298 o Several bugs were fixed in the code of all.equal.phylo().
2300 o Several bugs were fixed in write.dna(), particularly this
2301 function did not work with `format = "interleaved"'.
2303 o Various errors were corrected in the help pages.
2308 o The argument names of as.hclust.phylo() have been changed
2309 from "(phy)" to "(x, ...)" to conform to the definition of
2310 the corresponding generic function.
2312 o gamma.stat() has been renamed gammaStat() to avoid confusion
2313 since gamma() is a generic function.
2317 CHANGES IN APE VERSION 1.1-3
2322 o base.freq() previously did not return a value of 0 for
2323 bases absent in the data (e.g., a vector of length 3 was
2324 returned if one base was absent). This is now fixed (a
2325 vector of length 4 is always returned).
2327 o Several bugs were fixed in read.nexus(), including that this
2328 function did not work in this absence of a "TRANSLATE"
2329 command in the NEXUS file, and that the commands were
2334 CHANGES IN APE VERSION 1.1-2
2339 o The Tamura and Nei (1993) model of DNA distance is now implemented
2340 in dist.dna(): five models are now available in this function.
2342 o A new data set is included: a set of 15 sequences of the
2343 cytochrome b mitochondrial gene of the woodmouse (Apodemus
2349 o A bug in read.nexus() was fixed.
2351 o read.dna() previously did not work correctly in most cases.
2352 The function has been completely re-written and its help page
2353 has been considerably extended (see ?read.dna for details).
2354 Underscores (_) in taxon names are no more replaced with
2355 spaces (this behaviour was undocumented).
2357 o A bug was fixed in write.dna().
2361 CHANGES IN APE VERSION 1.1-1
2366 o A bug in read.tree() introduced in APE 1.1 was fixed.
2368 o A bug in compar.gee() resulted in an error when trying to fit
2369 a model with `family = "binomial"'. This is now fixed.
2373 CHANGES IN APE VERSION 1.1
2378 o The Klastorin (1982) method as suggested by Misawa and Tajima
2379 (2000, Mol. Biol. Evol. 17:1879-1884) for classifying genes
2380 on the basis of phylogenetic trees has been implemented (see
2381 the function klastorin()).
2383 o Functions have been added to convert APE's "phylo" objects in
2384 "hclust" cluster objects and vice versa (see the help page of
2385 as.phylo for details).
2387 o Three new functions, ratogram(), chronogram() and NPRS.criterion(),
2388 are introduced for the estimation of absolute evolutionary rates
2389 (ratogram) and dated clock-like trees (chronogram) from
2390 phylogenetic trees using the non-parametric rate smoothing approach
2391 by MJ Sanderson (1997, Mol. Biol. Evol. 14:1218-1231).
2393 o A summary method is now provided printing a summary information on a
2394 phylogenetic tree with, for instance, `summary(tree)'.
2396 o The behaviour of read.tree() was changed so that all spaces and
2397 tabulations in tree files are now ignored. Consequently, spaces in tip
2398 labels are no more allowed. Another side effect is that read.nexus()
2399 now does not replace the underscores (_) in tip labels with spaces
2400 (this behaviour was undocumented).
2402 o The function plot.phylo() has a new option (`underscore') which
2403 specifies whether the underscores in tip labels should be written on
2404 the plot as such or replaced with spaces (the default).
2406 o The function birthdeath() now computes 95% confidence intervals of
2407 the estimated parameters using profile likelihood.
2409 o Three new data sets are included: a gene tree estimated from 36
2410 landplant rbcL sequences, a gene tree estimated from 32 opsin
2411 sequences, and a gene tree for 50 BRCA1 mammalian sequences.
2416 o A bug was fixed in dist.gene() where nothing was returned.
2418 o A bug in plot.mst() was fixed.
2420 o A bug in vcv.phylo() resulted in false correlations when the
2421 option `cor = TRUE' was used (now fixed).
2425 CHANGES IN APE VERSION 1.0
2430 o Two new functions, read.dna() and write.dna(), read/write in a file
2431 DNA sequences in interleaved or in sequential format.
2433 o Two new functions, read.nexus() and write.nexus(), read/write trees
2436 o The new function bind.tree() allows to bind two trees together,
2437 possibly handling root edges to give internal branches.
2439 o The new function drop.tip() removes the tips in a phylogenetic tree,
2440 and trims (or not) the corresponding internal branches.
2442 o The new function is.ultrametric() tests if a tree is ultrametric.
2444 o The function plot.phylo() has more functionalities such as drawing the
2445 branches with different colours and/or different widths, showing the
2446 node labels, controling the position and font of the labels, rotating
2447 the labels, and controling the space around the plot.
2449 o The function read.tree() can now read trees with no branch length,
2450 such as "(a,b),c);". Consequently, the element `edge.length' in
2451 objects of class "phylo" is now optional.
2453 o The function write.tree() has a new default behaviour: if the default
2454 for the option `file' is used (i.e. file = ""), then a variable of
2455 mode character containing the tree in Newick format is returned which
2456 can thus be assigned (e.g., tree <- write.tree(phy)).
2458 o The function read.tree() has a new argument `text' which allows
2459 to read the tree in a variable of mode character.
2461 o A new data set is included: the phylogenetic relationships among
2462 the orders of birds from Sibley and Ahlquist (1990).
2466 CHANGES IN APE VERSION 0.2-1
2471 o Several bugs were fixed in the help pages.
2475 CHANGES IN APE VERSION 0.2
2480 o The function write.tree() writes phylogenetic trees (objects of class
2481 "phylo") in an ASCII file using the Newick parenthetic format.
2483 o The function birthdeath() fits a birth-death model to branching times
2484 by maximum likelihood, and estimates the corresponding speciation and
2487 o The function scale.bar() adds a scale bar to a plot of a phylogenetic
2490 o The function is.binary.tree() tests whether a phylogeny is binary.
2492 o Two generic functions, coalescent.intervals() and collapsed.intervals(),
2493 as well as some methods are introduced.
2495 o Several functions, including some generics and methods, for computing
2496 skyline plot estimates (classic and generalized) of effective
2497 population size through time are introduced and replace the function
2498 skyline.plot() in version 0.1.
2500 o Two data sets are now included: the phylogenetic relationships among
2501 the families of birds from Sibley and Ahlquist (1990), and an
2502 estimated clock-like phylogeny of HIV sequences sampled in the
2503 Democratic Republic of Congo.
2506 DEPRECATED & DEFUNCT
2508 o The function skyline.plot() in ape 0.1 has been deprecated and
2509 replaced by more elaborate functions (see above).
2514 o Two important bugs were fixed in plot.phylo(): phylogenies with
2515 multichotomies not at the root or not with only terminal branches,
2516 and phylogenies with a single node (i.e. only terminal branches)
2517 did not plot. These trees should be plotted correctly now.
2519 o Several bugs were fixed in diversi.time() in the computation of
2522 o Various errors were corrected in the help pages.