]>
git.donarmstrong.com Git - qmk_firmware.git/log
rempired [Sun, 18 Feb 2018 07:09:40 +0000 (23:09 -0800)]
1up60rgb Keyboard Support (#2404)
* Add files via upload
* Update keymap.c
* Update keymap.c
* Update 1up60rgb.c
* Tidy up the code a bit for submission into QMK Master
- Create readme file
- Fix compile issue with standard keymap
- Create default keymap
- Remove unused Makefile
* Keymap Adjustments
* Reworked alternate layouts
* Reworked keymaps
* Update keymap.c
* Update readme.md
Add carriage return to make README cleaner
Danny Nguyen [Fri, 16 Feb 2018 23:27:50 +0000 (18:27 -0500)]
Move hexwire layout into 4x12 layout folder
Danny Nguyen [Sat, 17 Feb 2018 03:13:28 +0000 (22:13 -0500)]
Add Dilly keyboard
GlenPickle [Fri, 16 Feb 2018 17:03:53 +0000 (11:03 -0600)]
Added Chimera LS and Chimera Ergo (#2335)
* Added Chimera Ortho keymap
* added readme
* fixed hardware link
* Added KC_KEYMAP
* resolving conflict
* Added Chimera LS and Chimera Ergo
* Added rules file
* fixed rule files
* Added Chimera Ortho keymap
* Added KC_KEYMAP
* Added Chimera LS and Chimera Ergo
* fixed rule files
* fixed rule files
* fixed image links
* Added KC_KEYMAP
* Added Chimera LS and Chimera Ergo
* Added Chimera Ortho keymap
* fixed rule files
* fixed rule files
* fixed image links
* Fixed KEYMAP vs KC_KEYMAP
Yan-Fa li [Mon, 11 Dec 2017 06:16:31 +0000 (22:16 -0800)]
u/yanfali custom keymap for Iris
Based heavily on the keymap by hexwire.
1. Moved LALT to LCTL; I don't need CTL because of ESCC.
1. Moved RAISE to old LALT.
1. Moved ENTER to old RAISE.
1. Move QUOTE to old ENTER.
1. Moved PLUS to old QUOTE.
1. replaced music next and volume up with browser forward and back
through history
Pittyolo [Tue, 13 Feb 2018 11:04:27 +0000 (12:04 +0100)]
Update keymap.c
tameone [Fri, 16 Feb 2018 17:01:51 +0000 (12:01 -0500)]
Iris: Create info.json (#2396)
* Create info.json
* Update info.json
Drashna Jaelre [Fri, 16 Feb 2018 17:00:39 +0000 (09:00 -0800)]
Fix EE HANDS on splits losing handedness if RGB is enabled (#2399)
* Fix EE HANDS on splits losing handedness if RGB is enabled
* Because I'm an idiot and did a bad cut/paste job
ChrissiQ [Fri, 16 Feb 2018 07:23:19 +0000 (00:23 -0700)]
Let's Split: Minor keymap fixes
Oryhara [Mon, 12 Feb 2018 20:47:32 +0000 (14:47 -0600)]
adding my stuff back after hard reset
Johan Ju [Sat, 10 Feb 2018 12:43:21 +0000 (13:43 +0100)]
Fix swedish NO_GRV
Fred Sundvik [Sat, 10 Feb 2018 23:33:57 +0000 (01:33 +0200)]
Change the CDC_NOTIFICATION_EPSIZE back to 8 from 32
Fred Sundvik [Sat, 10 Feb 2018 23:08:32 +0000 (01:08 +0200)]
Set unused USB serial buffer to 1 byte to save memory
Drashna Jaelre [Mon, 12 Feb 2018 20:46:35 +0000 (12:46 -0800)]
Update to drashna keymaps (#2381)
* Add to list of predefined rgb colors
* Change layer colors, to reflect new options
* Use Tag Toggle instead
* Clean up macros and add breathing indication for OSM Layer
* Get Viteri Macropad working properly
* Disable unused action features
* Use I2C because that's smaller, apparently
* Remove viterbi-half code
Gomme_Bidule [Mon, 12 Feb 2018 02:22:36 +0000 (03:22 +0100)]
Update feature_auto_shift.md
Kayle Knops [Mon, 12 Feb 2018 20:33:09 +0000 (21:33 +0100)]
Committed initial version of the knops configurator.
skullydazed [Sun, 11 Feb 2018 01:09:47 +0000 (17:09 -0800)]
Clueboard hotswap support (#2376)
skullydazed [Sun, 11 Feb 2018 01:08:37 +0000 (17:08 -0800)]
Modernize clueboard, add 66_ansi and 66_iso layouts (#2377)
yiancar [Sat, 10 Feb 2018 22:47:15 +0000 (23:47 +0100)]
New keyboard: Cu75 (#2374)
* Added Modular keyboards L,R and NUM
Created code modules for the 3 modules of the modular keyboard.
Original idea by MechboardsUK. Uses i2c implementation similar to lets
split
* Remove modular from master
This is to fix incorrect branching
* Addition of cu75
Addition of cu75 keyboard, uses libraries from LFKeyboards directory which are path linked to reduce file duplication.
Minor fix on cu24 readme
* Minor Readme Fix
IslandMan93 [Sun, 4 Feb 2018 21:50:49 +0000 (16:50 -0500)]
Diverge 3 initial commit
woo it works
use lets split code
Final working. Uses serial
Update license
Raymond Douglas [Sun, 4 Feb 2018 23:05:22 +0000 (15:05 -0800)]
Added raylas keymap for TADA68
Jason Barnachea [Sat, 10 Feb 2018 22:24:54 +0000 (14:24 -0800)]
Add JC65 ps2avrGB keyboard (#2351)
* Adds JC65 ps2avrGB keyboard
* Adds default keymap
* Adds personal keymap
* Backlight On/off support
Migrated code from the BFake. Functionality only on BL_ON, BL_OFF,
BL_TOGG.
* Backlighting config adjustment
Only 1 level supported.
* Personal keymap update
BL toggle added and RGB layer updates.
* Renamed jc65 ps2avrgb directory
Renamed directory for more clarity.
* Default keymap and default rules
* Personal keymap and personal rules
* Group JC65 QMK and PS2 versions
Group JC65 QMK and PS2 versions, Split directories, Readme for parent
folder.
* Default keycaps and personal keymaps re-added
Default and personal keymaps re-added. Keymaps, Readme, Rules.mk, and
config.h
* v32a default keymap rules
Default to no.
* RGB and Backlight default settings
Set to yes.
* Rules.mk defaults for personal keymap
Rules.mk defaults for personal keymap
* Revised keyboard readme make paths
Revised.
* Path correction
* jc65 default folder set
set default pcb to qmk version
* default rules for v32a
set to enable backlight and rgb by default.
Fred Sundvik [Sat, 10 Feb 2018 21:09:03 +0000 (23:09 +0200)]
Fix reset for STM32 devices
Michael F. Lamb [Wed, 7 Feb 2018 00:32:31 +0000 (16:32 -0800)]
add conditional to perform check-size only for supported architectures
Michael F. Lamb [Tue, 6 Feb 2018 20:05:48 +0000 (12:05 -0800)]
make check_size work across platforms
Drashna Jaelre [Thu, 8 Feb 2018 20:16:06 +0000 (12:16 -0800)]
Add the ability to disable Music Mode completely (#2339)
* Skip process_music in NO_MUSIC_MODE is defined
* Skip matrix_scan_music if NO_MUSIC_MODE is defined
* Skip music_all_notes_off if NO_MUSIC_MODE is defined
* Leave matrix_scan_music in, because it reduces firmware size by 150b....
* Add docs for NO_MUSIC_MODE
Danny Nguyen [Mon, 29 Jan 2018 15:49:26 +0000 (10:49 -0500)]
Switch from echo to printf for output without newlines
Danny Nguyen [Thu, 25 Jan 2018 21:36:01 +0000 (16:36 -0500)]
Only search through newly detected devices and discard ones that disappeared
fredizzimo [Thu, 8 Feb 2018 20:07:46 +0000 (22:07 +0200)]
Merge ChibiOS and LUFA descriptor support (#2362)
* Move lufa descriptor to protocol/usb_descriptor
* Try to compile usb_descriptor on ChibiOS
* Add lufa_utils for ChibiOS
Lufa USB descriptors for ChibiOS
* More lufa_util compatibility fixes
* First compiling version of shared USB descriptor
* Send the usb descriptors
* Fix the CONSOLE output on ChibiOS
* Add errors for unsupported interfaces
* Enable support for vitual serial port USB descriptors
* Implement virtual serial port for ChibiOS
* Cleanup the lufa_utils
Use the default lufa header files
* Add raw hid support for ChibiOS
This is completely untested
* Enable midi compilation on ChibiOS
* Move midi functionality out of lufa.c
* Don't register sysex callback when not needed
* ChibiOS compilation fixes
* Update ChibiOS submodule
* Fix the Midi USB descriptor
It didn't work properly when both Midi and Virtual serial port was enabled.
* Add MIDI support for ChibiOS
* Fix USB descriptor strings on ChibiOS
* Use serial usb driver for raw hid
* Generalize the ChibiOS stream like drivers
This makes the initialization much more simple and eliminates a lot of
the code duplication.
* Convert console output to chibios stream driver
* Fixes for ChibiOS update
* Update the ChibiOS contrib submodule
To include the usb data toggle synchronization fixes
* Fix duplicate reset enumeration on ChibiOS
* Add missing include
* Add number of endpoints check for ChibiOS
* Enable serial USB driver on all keyboards
* Add missing includes when API is enabled withot midi
* Add another missing inlcude
Jack Humbert [Thu, 8 Feb 2018 19:39:40 +0000 (14:39 -0500)]
ARM audio fixes, stack size increase (#2365)
* fix up arm audio implementation
* chibios stack size inc
* get one channel working
* update for chibios
jetpacktuxedo [Thu, 8 Feb 2018 16:55:51 +0000 (08:55 -0800)]
Fixed my minivan F-keys
Niles Christensen [Sun, 28 Jan 2018 20:24:43 +0000 (15:24 -0500)]
Makes layers consistent with comments
Danny Nguyen [Thu, 8 Feb 2018 15:09:53 +0000 (10:09 -0500)]
Replace Right key on base layer with RShift, convert adjust to KC_KEYMAP format
Fred Sundvik [Sat, 3 Feb 2018 10:55:56 +0000 (12:55 +0200)]
Send usb wakeup through ChibiOS
Fred Sundvik [Sat, 3 Feb 2018 10:43:22 +0000 (12:43 +0200)]
Update Chibios Contrib with 17.6.3 support
Fred Sundvik [Sat, 20 Jan 2018 16:12:38 +0000 (18:12 +0200)]
Update ChibiOS to 17.6.3
Legonut [Wed, 7 Feb 2018 04:44:10 +0000 (23:44 -0500)]
New keyboard added "Zen" (#2347)
* New keyboard added
Zen is a split ortholinear currently in group buy.
* remove bad keymap
Keymap was throwing errors
* remove other bad keymap
I should have checked these before haha
* small fix to update folder name
* renamed temp
* renamed to zen
* update folder name
* Slim down matrix code
Suggested by drashna
* move KC_NO
* Update keymap
* change from rev2 to rev1
Drashna Jaelre [Wed, 7 Feb 2018 04:21:03 +0000 (20:21 -0800)]
Re-add Flip Installer (#2355)
* Re-add Flip Installer
Found the update URL for it.
http://www.microchip.com/developmenttools/productdetails.aspx?partno=flip
* Comment out JRE installer version
QMK Bot [Wed, 7 Feb 2018 04:05:15 +0000 (04:05 +0000)]
convert to unix line-endings [skip ci]
KeLorean [Wed, 7 Feb 2018 04:01:29 +0000 (23:01 -0500)]
made changes to my kelorean planck keymap (#2343)
* Planck-swapped up/down arrows,s65x-add dvorak
* Added Dvorak as first layer of default keymap
* planck-swap up and down arrows. s65x-added dvorak
* added colemak to kelorean s65x keymap
* made more changes to kelorean keymap
* just tryinng to fix bc i was not connected upstrem
U-LANDSRAAD\drashna [Tue, 6 Feb 2018 05:57:32 +0000 (21:57 -0800)]
Remove _quantum functions from custom matrix.c code
skullydazed [Mon, 5 Feb 2018 16:54:49 +0000 (08:54 -0800)]
Add stm32 to drivers.txt
scauligi [Sun, 4 Feb 2018 18:45:19 +0000 (10:45 -0800)]
Fixes to get tap dance to fire at proper places (#2272)
* tap dance fixes: fire immediately upon completion and also get properly interrupted before macros
* bugfix for tapdance improvement
* fix build
KeLorean [Sun, 4 Feb 2018 18:44:58 +0000 (13:44 -0500)]
made kelorean keymaps for planck and s65x (#2331)
* Planck-swapped up/down arrows,s65x-add dvorak
* Added Dvorak as first layer of default keymap
* planck-swap up and down arrows. s65x-added dvorak
* added colemak to kelorean s65x keymap
Drashna Jaelre [Sun, 4 Feb 2018 18:44:02 +0000 (10:44 -0800)]
Update to drashna userspace (Keymap Templating) (#2338)
* Change tapping term to be longer
* Make Audio/Underglow settings permanent
* Use wait_ms rather than _delay_ms
* Readd One Shot Mods
* Switch to Imperial March startup sound
* Move OSM to it's own layer
* Minor Formatting Tweaks
* Keymap Templates and formatting fixes
Harley Laue [Fri, 6 Oct 2017 23:32:02 +0000 (16:32 -0700)]
Added personal nyquist & levinson layouts
f3d3 [Sat, 3 Feb 2018 20:22:30 +0000 (21:22 +0100)]
Added dz60 custom layout (#2302)
* Add files via upload
* Update keymap.c
* Delete keymap.c
* Added dz60 banana-split layout
* Added dz60 custom layout
Added layout for dz60 with split spacebar, arrows and other customizations.
jirgn [Sat, 3 Feb 2018 20:22:00 +0000 (21:22 +0100)]
just a planck layout (#2320)
* added jirgn keymap from dotfiles
* added jirgn s keymap as copy from default
* [TASK] removed unnecessary colemak and dvorak layouts
* [TASK] added right shift with tab to enter
* [TASK] added ctrl keys beside homerow
* [TASK] added Navigation Layer
removed unnecessary BACKLIT
removed Media Controls in Base Layers
* [TASK] added left Navigation mode fixed some doc
* [Fix] locked navigation layer by adding a transparent key for nav_mod
keys
* [TASK] added some more symbols and removed lower F1-F12 keys
* [TASK] added some README and a layout design
* [FIX] forced for adding to repo
* [FIX] forced for adding to repo
* [FIX] problem with layerswitching and hanging ctrl
* removed image from repo
* removed github image link with permalink from layout designer
* removed github image link with permalink from layout designer
* replaced image with permalink to layout editor
yiancar [Sat, 3 Feb 2018 20:21:24 +0000 (20:21 +0000)]
Cu24 keyboard addition (#2330)
* Added Modular keyboards L,R and NUM
Created code modules for the 3 modules of the modular keyboard.
Original idea by MechboardsUK. Uses i2c implementation similar to lets
split
* CU24 Support
Addes Support for the upcoming CU24 keyboard sold by CapsUnlocked
* Removed modular keyboards to make stuff clear
* Lower Case folders
* Remove CU24 - Rename Folder
* Add CU24 - Renamed
* Fixed ignore list
I am stupid
Fred Sundvik [Sat, 3 Feb 2018 15:47:28 +0000 (17:47 +0200)]
Fix .editorconfig to not mess with line endings
Emily Soldal [Thu, 4 Jan 2018 18:20:40 +0000 (19:20 +0100)]
Map num lock and caps lock LED events to the RXLED and TXLED
HagVcom [Fri, 2 Feb 2018 06:50:22 +0000 (07:50 +0100)]
Added "hag" keymap to Iris (#2313)
* Create keymap.c
Add Hag keymap, a heavily modified dvorak swedish keymap with multiple layouts and often used stuff under the alpha cluster.
* Create config.h
* Create rules.mk
Kenneth Aloysius [Fri, 2 Feb 2018 06:30:47 +0000 (17:30 +1100)]
Update personal layouts, free up matrix_scan_user for JJ40 (#2319)
* Add NIU Mini keymap from Planck keymap
* Remove old keymap files
* Fix README, removed Planck references
* Add default layout, move Planck layout to separate folder
* Update README
* Add my XD60 keymap
* Change RShift to slash
* Fix keymap: stuck on MO(1)
* Move RESET to Fn+Enter
* Add: RGB saturation cycle
* Add numpad layer to keymap
* Fix last case
* Cleanup Mechmini keymap. Once the custom RGB function is defined, there is no need to manually handle RGB code.
* Change default to KEYMAP_MIT, not KEYMAP_OFFSET
* Add custom RGB code for JJ40
* Reset Mechmini advertised power draw to 500. Will have to test actual maximum power draw later.
* RGB working on JJ40.
* Fix: saturation increase/decrease flipped
* Add new directory for my custom keymap with RGB keycodes
* Swap LAlt and LGUI
* Update JJ40 max power draw with measured value
* Update: fun40 rules.mk to enable underglow; earlier failed Travis CI
* Fix: init RGB LEDs on boot. Also added HHKB-like keymap for XD60.
* Super rudimentary backlight test, init RGB LEDs on boot
* Backlighting works - stays on for now
* Toggling working
* Now can override backlight.c functions. Problem was functions in backlight.c weren't called before due to a lack of matrix_scan_quantum() in matrix.c
* Timers not working
* Delete global.h
* Cleanup
* Compiles
* Good sign: LEDs stop working again
* Handle timer1 overflow
* Progress: fix: forgot to init
* Backlighting fully working now except breathing.
* Revert keymap to original keycodes
* Update XD60 keymap README
* Update JJ40 keymap with backlight toggles
* Breathing working just fine.
* Update references
* Add backlight_set() call
* Cleanup code to disable backlight
* Fix: does not compile
* Fix: missing call to rgblight_task.
* Testing with BACKLIGHT_BREATHING
* Cleanup
* Cleanup comments
* More commenting cleanup.
* Do not enable BACKLIGHT_BREATHING by default
* Update XD60 keymap
* Update: move matrix_scan_kb out from matrix.c to jj40.c (kb-level)
* Cleanup for PR
* Fix conflict in readme.md for NIU mini
* Restore original power consumption figure
* Fix: matrix_scan_user() now has to be defined in the keymaps
* Add weak `matrix_scan_user` so it does not have to be defined in keymap
* Add weak matrix_init_user()
kifinnsson [Fri, 2 Feb 2018 06:22:37 +0000 (23:22 -0700)]
Personal BEAKL9 based keymap (#2304)
* Adding personal BEAKL9 based keymap
Initial commit, very much a WIP/Proof of concept.
* Updating personal BEAKL9 based layout
* F-keys added to upper layer
jola5 [Fri, 2 Feb 2018 06:21:41 +0000 (07:21 +0100)]
Not quite neo (#2318)
* planck with a not-quite-neo layout for a de-DE OS/SW keymap
* ergodox infinity with a not-quite-neo layout for a de-DE OS/SW keymap
* add documentation
Donald [Fri, 2 Feb 2018 06:13:44 +0000 (01:13 -0500)]
Added info.json and updated README for Deltasplit75 (#2266)
* Added info.json and updated README
* Updated info.json
Louis Orleans [Fri, 2 Feb 2018 06:11:57 +0000 (22:11 -0800)]
🔧 create info.json for Infinity Ergodox (#2267)
* 🔧 create info.json for Infinity Ergodox
I'm not sure if the bootloader key is set correctly.
* 🐛 fix layout name
Erin Call [Mon, 22 Jan 2018 22:11:46 +0000 (14:11 -0800)]
Use perl directly instead of grep -P
BSD grep (the one on OSX) lacks a -P flag. The grep -P command thus
fails and prints a usage message to the terminal. This fixes that.
mvs [Thu, 18 Jan 2018 00:21:31 +0000 (19:21 -0500)]
QWERTY based layout with thumb-chording (SHIFT + SPECIAL) and programming layer.
Stephen Tudor [Sun, 7 Jan 2018 21:59:56 +0000 (16:59 -0500)]
Add smt keymap for KBD75
adiabatic [Fri, 2 Feb 2018 06:01:18 +0000 (22:01 -0800)]
zweihander: rename, ⌃ → ⌥, README revamp (#2311)
* zweihander-osx: Remove app keys, etc.
- add right command keys
- add F16 on ;' for Siri
- remove command-Q (too easy to hit)
* Rename zweihander-osx to zweihander-macos
zweihander-macos: / / ^ → / / ⌥; README revamp
zweihander: rename, ⌃ → ⌥, README revamp
Brosseau Valentin [Fri, 2 Feb 2018 06:00:39 +0000 (07:00 +0100)]
Xd75 : Bépo layout for the XD75 (#2166)
* Add xd75 layout
* Add Readme
* Update layout
* Remove Backlight keys
* Move ENTER / BACKSP / DEL
* Commit my bepo layout instead of the qwerty version since i will not use it
* Use 0 instead of 00
* Fix TODO key
* Update the readme
* Replace wrong key placment
* Update center column
* Update the layout with 2-u key
* Adjust the fn layer
* Adjust the main layer
* Adjust the fn layer
Christian Richter [Fri, 2 Feb 2018 06:00:09 +0000 (07:00 +0100)]
Added us based keyboard layout with cursor keys and mouse functionality for SATAN GH60 (#2180)
* Add chaser keymap
* Added missing readme
* Add missing mousewheel und mousebutton 3
Daniel Shields [Fri, 8 Dec 2017 14:33:24 +0000 (14:33 +0000)]
Replace custom tap dance keys with mod tap keys in planck/keymaps/dshields
Chris Lee [Sat, 2 Dec 2017 10:26:49 +0000 (03:26 -0700)]
Add support for key backlighting to bfake
If BACKLIGHT_ENABLE is set to `yes` in `rules.mk`, then the user
can use the `BL_*` keycodes to adjust the backlight. At the moment,
only on/off is supported.
Koen Klinkers [Fri, 2 Feb 2018 04:08:39 +0000 (05:08 +0100)]
updated xd75 layout (#2321)
* plank layout
* ergodone
* x75
* readmes
* added rgb controls
* bslash
* added backlighting based on layer/modifier
* changed colors
Oryhara [Fri, 2 Feb 2018 04:08:18 +0000 (22:08 -0600)]
Halfkey function for every layer (#2327)
* started work on halfkeyboard
* update to keymap
* halfkey layouts complete for dvorak and qwerty
* added plover layout to halfkeyboard mapping
* fixed error in dvorak layout right hand
* fixed error in dvorak layout right hand, comments updated
* thing
* added minus and equals to normal layouts
* added minus and equals to normal layouts
* adde visualizer matching halfkeyboard mappings
* adde visualizer matching halfkeyboard mappings
* updated keymaps for mirror handedness functionality for all layers. Also added visualizer code for distinct color for each layer, and LCD text displaying the current layer.
* had a KC_TILD where should have had KC_GRAV
* its spelled KC_GRAVE
Null [Fri, 2 Feb 2018 04:07:47 +0000 (22:07 -0600)]
added my layout (#2326)
* added my layout
basically just default with proper arrow-keys
* fixed arrow keys now works properly
Mitchell van Manen [Thu, 1 Feb 2018 21:10:25 +0000 (22:10 +0100)]
Imperial Match (Darth Vader's Theme) added
crappy recording: https://clyp.it/0lufqils
Michael Kaylan [Thu, 1 Feb 2018 22:12:23 +0000 (16:12 -0600)]
Add missing parenthesis back to backlight_tick
LEdiodes [Sun, 28 Jan 2018 20:58:42 +0000 (14:58 -0600)]
added ATOM47 (Vortex Core QMK powered PCB) & DZ60 Custom config(LEdiodes) (#2310)
* added ATOM47 (Vortex Core QMK powered PCB)
* fixed broken\unfinished comment block
* moved Layer template to default template.
* moved Layer template to default template and removed template from the keymap.c file.
* Added LEdiodes config
* created readme.md
contains an image of 60% board(LEdiodes).
* updated readme.md with images
added images of the PCB and some feature details from https://geekhack.org/index.php?topic=93447.msg2545221#msg2545221
* removed excess words.
* followed the readme template to a T.
* formatting fix : added a return.
sanosis [Sun, 28 Jan 2018 20:58:03 +0000 (21:58 +0100)]
Support for YMDK NP21 (#2316)
* ymdk_np21 initial support
Base support of ymdk_np21 - based on jj40. Full grid layout
* Update README.md
Replacing description.
* Adding YMDK NP21 to comunity list.
Adding YMDK NP21 to community supported list.
sanosis [Sun, 28 Jan 2018 19:46:22 +0000 (20:46 +0100)]
Adding jj40 to keyboard list (#2315)
* Adding jj40 to keyboard list
Adding jj40 to Community-supported list.
* Update readme.md
skullydazed [Sun, 28 Jan 2018 19:11:28 +0000 (11:11 -0800)]
Always copy the firmware file to the root qmk_firmware directory (#2314)
* Always copy the firmware file to the root qmk_firmware directory
* remove circular dependency
Sam Perman [Sat, 27 Jan 2018 15:49:43 +0000 (10:49 -0500)]
update sed to work on mac
See https://stackoverflow.com/questions/
19456518 /invalid-command-code-despite-escaping-periods-using-sed
MakotoKurauchi [Sun, 28 Jan 2018 17:14:12 +0000 (02:14 +0900)]
Add helix keyboard (#2308)
* Fork from Let's Split
* Organizing files
* Delete some keymaps
* I2C and serial enabled at the same time
* Change readme
* add #define HELIX_ROWS for multiple rows
* Delete avrdude flashing script
* Delete makefiles
* Subproject elimination
* Fix lufa path
* Remove PLAY_NOTE_ARRAY usages to get rid of warning.
Fix conflicting function name
* Mousekey change default to off
* Fix to oled display adjust
* make rev2
change pin assign
change keymap
* use master_buffer
* Timing adjustment
* Organizing files
* Change Keymap
* Change Keymap
Add EISU and KANA
Correct 4rows
* NKRO default to disable
* EXTRAKEY_ENABLE default to disable
* add rgb reset key
* rgb custom function enable
* Extend font
* add RGBLED_POWER
default folder to helix/rev2
RGB_ENABLE to no
* renamed directory
* Disable RGBLIGHT_CUSTOM_DRIVER
* Disable LOCKING_SUPPORT_ENABLE
* Update bootloader setting
* Change readme
* Fixed argument error
Gabriel Rauter [Fri, 26 Jan 2018 12:57:09 +0000 (13:57 +0100)]
katana60: fix bootloader size to work with PCB
Fix the bootloader size so the `RESET` key actually resets to the
bootloader instead of just restarting the boards.
Mason McAllaster [Thu, 25 Jan 2018 06:09:37 +0000 (01:09 -0500)]
Adding personal keymap for planck/niu_mini (#2263)
* Adding mason keymap for planck/niu_mini
* Adding power shortcut
manofinterests [Sat, 13 Jan 2018 03:41:14 +0000 (19:41 -0800)]
hi there friends
na7thana [Thu, 25 Jan 2018 06:04:31 +0000 (22:04 -0800)]
Hi there :) (#2273)
Alex Vogel [Thu, 25 Jan 2018 06:03:49 +0000 (07:03 +0100)]
[Keymap] semi-ISO Spanish HHKB Keymap for Satan Keyboards (#2290)
* ISO HHKB first commit
* First version of my HHKB ISO Spanish Keymap
* Readme.md
* Added more media keys.
Caps Lock added on function layer.
Backlight toggle added on funtion layer.
* RGB support for WS2812B RGB led strip
* RGB and brightness control.
Greizgh [Sat, 20 Jan 2018 15:41:36 +0000 (16:41 +0100)]
Fix compilation error when RGB light is disabled
TerryMathews [Thu, 25 Jan 2018 06:00:59 +0000 (01:00 -0500)]
Add SSD1306 OLED display support to TKC1800 (#2293)
* Add support for SSD1306 OLED display
* Correct keymap
Had tilde on keymap instead of grave, corrected.
* Winkeyless keymap
allo-world [Thu, 25 Jan 2018 06:00:31 +0000 (22:00 -0800)]
Added KBD66 (#2292)
* Created default layout for KBD66.
* Added KBD66 ISO layout.
Thomas Järvstrand [Sun, 21 Jan 2018 20:32:19 +0000 (21:32 +0100)]
Make new_project.sh a bit more robust
Danny Nguyen [Wed, 20 Dec 2017 15:58:28 +0000 (10:58 -0500)]
Add Chocopad keyboard
Danny Nguyen [Thu, 18 Jan 2018 19:51:16 +0000 (14:51 -0500)]
Update pinout for Rev. 1.0 Iris without LED
Joe DeVivo [Fri, 29 Dec 2017 16:09:54 +0000 (09:09 -0700)]
Iris send backlight info over i2c
U-LANDSRAAD\drashna [Wed, 27 Dec 2017 02:06:27 +0000 (18:06 -0800)]
Disable MIDI on Planck so all revisions compile without compilition size errors
Fred Sundvik [Sun, 21 Jan 2018 08:57:25 +0000 (10:57 +0200)]
Enable FPU on Clueboard60
Fred Sundvik [Sun, 21 Jan 2018 08:56:41 +0000 (10:56 +0200)]
Revert back to normal sleeping wait behaviour for STM32
Fred Sundvik [Sun, 21 Jan 2018 08:55:40 +0000 (10:55 +0200)]
Fix compiler settings for MCUs with floating point
skullY [Fri, 19 Jan 2018 19:58:19 +0000 (11:58 -0800)]
Clarify the format for layout names
Kenneth Aloysius [Thu, 18 Jan 2018 21:02:32 +0000 (08:02 +1100)]
Backlighting for JJ40 and underglow initialisation code (#2260)
* Cleanup Mechmini keymap. Once the custom RGB function is defined, there is no need to manually handle RGB code.
* Change default to KEYMAP_MIT, not KEYMAP_OFFSET
* Add custom RGB code for JJ40
* Reset Mechmini advertised power draw to 500. Will have to test actual maximum power draw later.
* RGB working on JJ40.
* Fix: saturation increase/decrease flipped
* Add new directory for my custom keymap with RGB keycodes
* Swap LAlt and LGUI
* Update JJ40 max power draw with measured value
* Update: fun40 rules.mk to enable underglow; earlier failed Travis CI
* Fix: init RGB LEDs on boot. Also added HHKB-like keymap for XD60.
* Super rudimentary backlight test, init RGB LEDs on boot
* Backlighting works - stays on for now
* Toggling working
* Now can override backlight.c functions. Problem was functions in backlight.c weren't called before due to a lack of matrix_scan_quantum() in matrix.c
* Timers not working
* Delete global.h
* Cleanup
* Compiles
* Good sign: LEDs stop working again
* Handle timer1 overflow
* Progress: fix: forgot to init
* Backlighting fully working now except breathing.
* Revert keymap to original keycodes
* Update XD60 keymap README
* Update JJ40 keymap with backlight toggles
* Breathing working just fine.
* Update references
* Add backlight_set() call
* Cleanup code to disable backlight
* Fix: does not compile
* Fix: missing call to rgblight_task.
* Testing with BACKLIGHT_BREATHING
* Cleanup
* Cleanup comments
* More commenting cleanup.
* Do not enable BACKLIGHT_BREATHING by default
amanda flagg [Wed, 17 Jan 2018 23:13:52 +0000 (15:13 -0800)]
add dz60 map with arrow keys (#2270)
stephengrier [Wed, 17 Jan 2018 19:44:12 +0000 (19:44 +0000)]
Adding stephengrier keymap for the tada68 keyboard. (#2269)
Drashna Jaelre [Wed, 17 Jan 2018 19:28:23 +0000 (11:28 -0800)]
Update to drashna keymaps (#2281)
* Move faux clicky into userspace
* Get Audio and RGB enabled on Orthodox-rev1
* Add faux click to userspace
* Add Orthodox Rev3 check to macros
* Hack Orthodox Name for drashna keymap
* No more One Shots
* Ergodox product name hack
* Enable Audio on Orthodox by default
skullydazed [Sun, 14 Jan 2018 04:38:25 +0000 (20:38 -0800)]
Fix up the ARM audio support (#2136)
* Get audio working on clueboard/60
* add keys for music mode
* Change doubles to floats
* add keys for all the songs
* revert to the default startup sound
* Remove music mode until we can figure out why it crashes
manofinterests [Sat, 13 Jan 2018 04:23:25 +0000 (20:23 -0800)]
Update info.json
Jack Humbert [Sat, 13 Jan 2018 01:47:39 +0000 (20:47 -0500)]
Update info.json