#!/bin/sh
-if grep ID /etc/os-release | grep -q rhel; then
- # RPM based OS
- sudo dnf install gcc unzip wget zip dfu-util dfu-programmer avr-gcc \
- avr-libc binutils-avr32-linux-gnu arm-none-eabi-gcc-cs \
- arm-none-eabi-binutils-cs arm-none-eabi-newlib
-elif grep ID /etc/os-release | grep -q debian; then
+
+# Note: This file uses tabs to indent. Please don't mix tabs and spaces.
+
+GENTOO_WARNING="This script will make a USE change in order to ensure that that QMK works on your system. All changes will be sent to the the file /etc/portage/package.use/qmkfirmware -- please review it, and read Portage's output carefully before installing any packages on your system. You will also need to ensure that your kernel is compiled with support for the keyboard chip that you are using (e.g. enable Arduino for the Pro Micro). Further information can be found on the Gentoo wiki."
+
+SLACKWARE_WARNING="You will need the following packages from slackbuilds.org:\n\tarm-binutils\n\tarm-gcc\n\tavr-binutils\n\tavr-gcc\n\tavr-libc\n\tavrdude\n\tdfu-programmer\n\tdfu-util\n\tnewlib\nThese packages will be installed with sudo and sboinstall, so ensure that your user is added to sudoers and that sboinstall is configured."
+
+SOLUS_INFO="Your tools are now installed. To start using them, open new terminal or source these scripts:\n\t/usr/share/defaults/etc/profile.d/50-arm-toolchain-path.sh\n\t/usr/share/defaults/etc/profile.d/50-avr-toolchain-path.sh"
+
+util_dir=$(dirname "$0")
+
+if grep ID /etc/os-release | grep -qE "fedora"; then
+ sudo dnf install \
+ arm-none-eabi-binutils-cs \
+ arm-none-eabi-gcc-cs \
+ arm-none-eabi-newlib \
+ avr-binutils \
+ avr-gcc \
+ avr-libc \
+ binutils-avr32-linux-gnu \
+ dfu-util \
+ dfu-programmer \
+ diffutils \
+ git \
+ gcc \
+ glibc-headers \
+ kernel-devel \
+ kernel-headers \
+ make \
+ perl \
+ python3 \
+ unzip \
+ wget \
+ zip
+
+elif grep ID /etc/os-release | grep -qE 'debian|ubuntu'; then
+ DEBIAN_FRONTEND=noninteractive
+ DEBCONF_NONINTERACTIVE_SEEN=true
+ export DEBIAN_FRONTEND DEBCONF_NONINTERACTIVE_SEEN
sudo apt-get update
- sudo apt-get install gcc unzip wget zip gcc-avr binutils-avr avr-libc \
- dfu-programmer dfu-util gcc-arm-none-eabi binutils-arm-none-eabi \
- libnewlib-arm-none-eabi
-elif grep ID /etc/os-release | grep -q arch; then
- sudo pacman -S gcc unzip wget zip avr-gcc avr-binutils avr-libc \
- dfu-util arm-none-eabi-gcc arm-none-eabi-binutils \
- arm-none-eabi-newlib
+ sudo apt-get -yq install \
+ build-essential \
+ avr-libc \
+ binutils-arm-none-eabi \
+ binutils-avr \
+ dfu-programmer \
+ dfu-util \
+ diffutils \
+ gcc \
+ gcc-arm-none-eabi \
+ gcc-avr \
+ git \
+ libnewlib-arm-none-eabi \
+ python3 \
+ unzip \
+ wget \
+ zip
+
+elif grep ID /etc/os-release | grep -q 'arch\|manjaro'; then
+ sudo pacman -U https://archive.archlinux.org/packages/a/avr-gcc/avr-gcc-8.3.0-1-x86_64.pkg.tar.xz
+ sudo pacman -S \
+ arm-none-eabi-binutils \
+ arm-none-eabi-gcc \
+ arm-none-eabi-newlib \
+ avrdude \
+ avr-binutils \
+ avr-libc \
+ avr-gcc \
+ base-devel \
+ dfu-util \
+ diffutils \
+ gcc \
+ git \
+ python \
+ unzip \
+ wget \
+ zip
git clone https://aur.archlinux.org/dfu-programmer.git /tmp/dfu-programmer
- cd /tmp/dfu-programmer
+ cd /tmp/dfu-programmer || exit 1
makepkg -sic
rm -rf /tmp/dfu-programmer/
+
elif grep ID /etc/os-release | grep -q gentoo; then
- echo "This script will make a USE change in order to ensure that that QMK works on your system. All changes will be sent to the the file /etc/portage/package.use/qmk_firmware -- please review it, and read Portage's output carefully before installing any packages on your system. You will also need to ensure that your kernel is compiled with support for the keyboard chip that you are using (e.g. enable Arduino for the Pro Micro). Further information can be found on the Gentoo wiki."
- echo -n "Proceed (y/N)? "
- old_stty_cfg=$(stty -g)
- stty raw -echo
- answer=$( while ! head -c 1 | grep -i '[ny]' ;do true ;done )
- stty $old_stty_cfg
- if echo "$answer" | grep -iq "^y" ;then
- sudo touch /etc/portage/package.use/qmkfirmware
- echo "sys-devel/gcc multilib" | sudo tee --append /etc/portage/package.use/qmkfirmware > /dev/null
- sudo emerge -auN sys-devel/gcc app-arch/unzip app-arch/zip net-misc/wget app-mobilephone/dfu-util sys-devel/crossdev dev-embedded/avrdude
- sudo crossdev -s4 --stable --g =4.9.4 --portage --verbose --target avr
- echo Done!
- else
- echo "Quitting..."
-fi
+ echo "$GENTOO_WARNING" | fmt
+ printf "\nProceed (y/N)? "
+ read -r answer
+ if echo "$answer" | grep -iq "^y"; then
+ sudo touch /etc/portage/package.use/qmkfirmware
+ # tee is used here since sudo doesn't apply to >>
+ echo "sys-devel/gcc multilib" | sudo tee --append /etc/portage/package.use/qmkfirmware >/dev/null
+ sudo emerge -auN \
+ app-arch/unzip \
+ app-arch/zip \
+ app-mobilephone/dfu-util \
+ dev-embedded/avrdude \
+ dev-lang/python:3.5 \
+ net-misc/wget \
+ sys-devel/gcc \
+ sys-devel/crossdev
+ sudo crossdev -s4 --stable --g =4.9.4 --portage --verbose --target avr
+ echo "Done!"
+ else
+ echo "Quitting..."
+ fi
+
+elif grep ID /etc/os-release | grep -q sabayon; then
+ sudo equo install \
+ app-arch/unzip \
+ app-arch/zip \
+ app-mobilephone/dfu-util \
+ dev-embedded/avrdude \
+ dev-lang/python \
+ net-misc/wget \
+ sys-devel/gcc \
+ sys-devel/crossdev
+ sudo crossdev -s4 --stable --g =4.9.4 --portage --verbose --target avr
+ echo "Done!"
+
+elif grep ID /etc/os-release | grep -qE "opensuse|tumbleweed"; then
+ CROSS_AVR_GCC=cross-avr-gcc8
+ CROSS_ARM_GCC=cross-arm-none-gcc8
+ if grep ID /etc/os-release | grep -q "15."; then
+ CROSS_AVR_GCC=cross-avr-gcc7
+ CROSS_ARM_GCC=cross-arm-none-gcc7
+ fi
+ sudo zypper install \
+ avr-libc \
+ $CROSS_AVR_GCC \
+ $CROSS_ARM_GCC \
+ cross-avr-binutils \
+ cross-arm-none-newlib-devel \
+ cross-arm-binutils cross-arm-none-newlib-devel \
+ dfu-tool \
+ dfu-programmer \
+ gcc \
+ python3 \
+ unzip \
+ wget \
+ zip
+
+elif grep ID /etc/os-release | grep -q slackware; then
+ printf "$SLACKWARE_WARNING\n"
+ printf "\nProceed (y/N)? "
+ read -r answer
+ if echo "$answer" | grep -iq "^y" ;then
+ sudo sboinstall \
+ avr-binutils \
+ avr-gcc \
+ avr-libc \
+ avrdude \
+ dfu-programmer \
+ dfu-util \
+ arm-binutils \
+ arm-gcc \
+ newlib \
+ python3
+ echo "Done!"
+ else
+ echo "Quitting..."
+ fi
+
+elif grep ID /etc/os-release | grep -q solus; then
+ sudo eopkg ur
+ sudo eopkg it \
+ -c system.devel \
+ arm-none-eabi-gcc \
+ arm-none-eabi-binutils \
+ arm-none-eabi-newlib \
+ avr-libc \
+ avr-binutils \
+ avr-gcc \
+ avrdude \
+ dfu-util \
+ dfu-programmer \
+ python3 \
+ git \
+ wget \
+ zip \
+ unzip
+ printf "\n$SOLUS_INFO\n"
+
else
echo "Sorry, we don't recognize your OS. Help us by contributing support!"
echo
- echo "https://docs.qmk.fm/contributing.html"
+ echo "https://docs.qmk.fm/#/contributing"
fi
+
+# Global install tasks
+pip3 install -r ${util_dir}/../requirements.txt
projects / qmk_firmware.git / blobdiff