# Note: This file uses tabs to indent. Please don't mix tabs and spaces.
-GENTOO_WARNING="This script will make a USE change in order to ensure that that QMK works on your system. All changes will be sent to the the file /etc/portage/package.use/qmk_firmware -- please review it, and read Portage's output carefully before installing any packages on your system. You will also need to ensure that your kernel is compiled with support for the keyboard chip that you are using (e.g. enable Arduino for the Pro Micro). Further information can be found on the Gentoo wiki."
+GENTOO_WARNING="This script will make a USE change in order to ensure that that QMK works on your system. All changes will be sent to the the file /etc/portage/package.use/qmkfirmware -- please review it, and read Portage's output carefully before installing any packages on your system. You will also need to ensure that your kernel is compiled with support for the keyboard chip that you are using (e.g. enable Arduino for the Pro Micro). Further information can be found on the Gentoo wiki."
SLACKWARE_WARNING="You will need the following packages from slackbuilds.org:\n\tarm-binutils\n\tarm-gcc\n\tavr-binutils\n\tavr-gcc\n\tavr-libc\n\tavrdude\n\tdfu-programmer\n\tdfu-util\n\tnewlib\nThese packages will be installed with sudo and sboinstall, so ensure that your user is added to sudoers and that sboinstall is configured."
+SOLUS_INFO="Your tools are now installed. To start using them, open new terminal or source these scripts:\n\t/usr/share/defaults/etc/profile.d/50-arm-toolchain-path.sh\n\t/usr/share/defaults/etc/profile.d/50-avr-toolchain-path.sh"
+
+util_dir=$(dirname "$0")
+
+# For those distros that do not package bootloadHID
+install_bootloadhid() {
+ wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz -O - | tar -xz -C /tmp
+ cd /tmp/bootloadHID.2012-12-08/commandline/
+ if make; then
+ sudo cp bootloadHID /usr/local/bin
+ fi
+ cd -
+}
+
if grep ID /etc/os-release | grep -qE "fedora"; then
sudo dnf install \
arm-none-eabi-binutils-cs \
avr-gcc \
avr-libc \
binutils-avr32-linux-gnu \
+ clang \
dfu-util \
dfu-programmer \
diffutils \
glibc-headers \
kernel-devel \
kernel-headers \
+ libusb-devel \
make \
perl \
python3 \
avr-libc \
binutils-arm-none-eabi \
binutils-avr \
+ clang-format \
dfu-programmer \
dfu-util \
diffutils \
gcc-avr \
git \
libnewlib-arm-none-eabi \
+ libusb-dev \
python3 \
+ python3-pip \
unzip \
wget \
zip
elif grep ID /etc/os-release | grep -q 'arch\|manjaro'; then
- # install avr-gcc 8.1 until 8.3 is available. See #3657 for details of the bug.
- sudo pacman -U https://archive.archlinux.org/packages/a/avr-gcc/avr-gcc-8.1.0-1-x86_64.pkg.tar.xz
- sudo pacman -S \
+ sudo pacman -U https://archive.archlinux.org/packages/a/avr-gcc/avr-gcc-8.3.0-1-x86_64.pkg.tar.xz
+ sudo pacman -S --needed \
arm-none-eabi-binutils \
arm-none-eabi-gcc \
arm-none-eabi-newlib \
+ avrdude \
avr-binutils \
avr-libc \
avr-gcc \
base-devel \
+ bootloadhid \
+ clang \
+ dfu-programmer \
dfu-util \
diffutils \
gcc \
git \
+ libusb-compat \
python \
+ python-pip \
unzip \
wget \
zip
- git clone https://aur.archlinux.org/dfu-programmer.git /tmp/dfu-programmer
- cd /tmp/dfu-programmer || exit 1
- makepkg -sic
- rm -rf /tmp/dfu-programmer/
elif grep ID /etc/os-release | grep -q gentoo; then
echo "$GENTOO_WARNING" | fmt
dev-embedded/avrdude \
dev-lang/python:3.5 \
net-misc/wget \
+ sys-devel/clang \
sys-devel/gcc \
sys-devel/crossdev
sudo crossdev -s4 --stable --g =4.9.4 --portage --verbose --target avr
dev-embedded/avrdude \
dev-lang/python \
net-misc/wget \
+ sys-devel/clang \
sys-devel/gcc \
sys-devel/crossdev
sudo crossdev -s4 --stable --g =4.9.4 --portage --verbose --target avr
elif grep ID /etc/os-release | grep -qE "opensuse|tumbleweed"; then
CROSS_AVR_GCC=cross-avr-gcc8
CROSS_ARM_GCC=cross-arm-none-gcc8
- if grep ID /etc/os-release | grep -q "15.0"; then
+ if grep ID /etc/os-release | grep -q "15."; then
CROSS_AVR_GCC=cross-avr-gcc7
CROSS_ARM_GCC=cross-arm-none-gcc7
fi
sudo zypper install \
avr-libc \
+ clang \
$CROSS_AVR_GCC \
$CROSS_ARM_GCC \
cross-avr-binutils \
dfu-tool \
dfu-programmer \
gcc \
+ libusb-devel \
python3 \
unzip \
wget \
echo "Quitting..."
fi
+elif grep ID /etc/os-release | grep -q solus; then
+ sudo eopkg ur
+ sudo eopkg it \
+ -c system.devel \
+ arm-none-eabi-gcc \
+ arm-none-eabi-binutils \
+ arm-none-eabi-newlib \
+ avr-libc \
+ avr-binutils \
+ avr-gcc \
+ avrdude \
+ dfu-util \
+ dfu-programmer \
+ libusb-devel \
+ python3 \
+ git \
+ wget \
+ zip \
+ unzip
+ printf "\n$SOLUS_INFO\n"
+
+elif grep ID /etc/os-release | grep -q void; then
+ # musl Void systems don't have glibc cross compilers avaliable in their repos.
+ # glibc Void systems do have musl cross compilers though, for some reason.
+ # So, default to musl, and switch to glibc if it is installed.
+ CROSS_ARM=cross-arm-linux-musleabi
+ if xbps-query glibc > /dev/null; then # Check is glibc if installed
+ CROSS_ARM=cross-arm-linux-gnueabi
+ fi
+
+ sudo xbps-install \
+ avr-binutils \
+ avr-gcc \
+ avr-libc \
+ $CROSS_ARM \
+ dfu-programmer \
+ dfu-util \
+ gcc \
+ git \
+ make \
+ wget \
+ unzip \
+ zip
+
else
echo "Sorry, we don't recognize your OS. Help us by contributing support!"
echo
echo "https://docs.qmk.fm/#/contributing"
fi
+
+# Global install tasks
+install_bootloadhid
+pip3 install --user -r ${util_dir}/../requirements.txt
projects / qmk_firmware.git / blobdiff