]> git.donarmstrong.com Git - qmk_firmware.git/blobdiff - tmk_core/tool/mbed/mbed-sdk/libraries/net/eth/lwip-eth/arch/TARGET_Freescale/hardware_init_MK64F12.c
Cleans up quantum/keymap situation, removes extra lufa folders (#416)
[qmk_firmware.git] / tmk_core / tool / mbed / mbed-sdk / libraries / net / eth / lwip-eth / arch / TARGET_Freescale / hardware_init_MK64F12.c
diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/net/eth/lwip-eth/arch/TARGET_Freescale/hardware_init_MK64F12.c b/tmk_core/tool/mbed/mbed-sdk/libraries/net/eth/lwip-eth/arch/TARGET_Freescale/hardware_init_MK64F12.c
deleted file mode 100644 (file)
index 708764a..0000000
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Copyright (c) 2013 - 2014, Freescale Semiconductor, Inc.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * o Redistributions of source code must retain the above copyright notice, this list
- *   of conditions and the following disclaimer.
- *
- * o Redistributions in binary form must reproduce the above copyright notice, this
- *   list of conditions and the following disclaimer in the documentation and/or
- *   other materials provided with the distribution.
- *
- * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
- *   contributors may be used to endorse or promote products derived from this
- *   software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "fsl_port_hal.h"
-#include "fsl_clock_manager.h"
-#include "fsl_device_registers.h"
-#include "fsl_sim_hal.h"
-
-/*******************************************************************************
- * Code
- ******************************************************************************/
-void k64f_init_eth_hardware(void)
-{
-    uint8_t count;
-
-    /* Disable the mpu*/
-    BW_MPU_CESR_VLD(MPU_BASE, 0);
-    
-    /* Open POTR clock gate*/
-    for (count = 0; count < HW_PORT_INSTANCE_COUNT; count++)
-    {
-        CLOCK_SYS_EnablePortClock(count);
-    }
-
-    /* Configure gpio*/
-    PORT_HAL_SetMuxMode(PORTA_BASE, 12, kPortMuxAlt4);  /*!< ENET RMII0_RXD1/MII0_RXD1*/
-    PORT_HAL_SetMuxMode(PORTA_BASE, 13, kPortMuxAlt4);  /*!< ENET RMII0_RXD0/MII0_RXD0*/
-    PORT_HAL_SetMuxMode(PORTA_BASE, 14, kPortMuxAlt4);  /*!< ENET RMII0_CRS_DV/MII0_RXDV*/
-    PORT_HAL_SetMuxMode(PORTA_BASE, 15, kPortMuxAlt4);  /*!< ENET RMII0_TXEN/MII0_TXEN*/
-    PORT_HAL_SetMuxMode(PORTA_BASE, 16, kPortMuxAlt4);  /*!< ENET RMII0_TXD0/MII0_TXD0*/
-    PORT_HAL_SetMuxMode(PORTA_BASE, 17, kPortMuxAlt4);  /*!< ENET RMII0_TXD01/MII0_TXD1*/
-    PORT_HAL_SetMuxMode(PORTB_BASE, 0, kPortMuxAlt4);   /*!< ENET RMII0_MDIO/MII0_MDIO*/
-    PORT_HAL_SetOpenDrainCmd(PORTB_BASE,0, true);   /*!< ENET RMII0_MDC/MII0_MDC*/
-
-    // Added for FRDM-K64F
-    PORT_HAL_SetPullMode(PORTB_BASE, 0, kPortPullUp);
-    PORT_HAL_SetPullCmd(PORTB_BASE, 0, true);
-  
-    PORT_HAL_SetMuxMode(PORTB_BASE, 1, kPortMuxAlt4);
-    /* Configure GPIO for MII interface */
-    PORT_HAL_SetMuxMode(PORTA_BASE, 9, kPortMuxAlt4);   /*!< ENET MII0_RXD3*/
-    PORT_HAL_SetMuxMode(PORTA_BASE, 10, kPortMuxAlt4);   /*!< ENET MII0_RXD2*/
-    PORT_HAL_SetMuxMode(PORTA_BASE, 11, kPortMuxAlt4);   /*!< ENET MII0_RXCLK*/
-    PORT_HAL_SetMuxMode(PORTA_BASE, 24, kPortMuxAlt4);   /*!< ENET MII0_TXD2*/
-    PORT_HAL_SetMuxMode(PORTA_BASE, 25, kPortMuxAlt4);   /*!< ENET MII0_TXCLK*/
-    PORT_HAL_SetMuxMode(PORTA_BASE, 26, kPortMuxAlt4);   /*!< ENET MII0_TXD3*/
-    PORT_HAL_SetMuxMode(PORTA_BASE, 27, kPortMuxAlt4);   /*!< ENET MII0_CRS*/
-    PORT_HAL_SetMuxMode(PORTA_BASE, 28, kPortMuxAlt4);   /*!< ENET MII0_TXER*/
-    PORT_HAL_SetMuxMode(PORTA_BASE, 29, kPortMuxAlt4);   /*!< ENET MII0_COL*/
-#if FSL_FEATURE_ENET_SUPPORT_PTP
-    PORT_HAL_SetMuxMode(PORTC_BASE, (16 + ENET_TIMER_CHANNEL_NUM), kPortMuxAlt4); /* ENET ENET0_1588_TMR0*/
-    PORT_HAL_SetDriveStrengthMode(PORTC_BASE, (16 + ENET_TIMER_CHANNEL_NUM), kPortHighDriveStrength);
-#endif
-
-    /* Open ENET clock gate*/
-    CLOCK_SYS_EnableEnetClock( 0U);
-
-    /* Select the ptp timer  outclk*/
-    CLOCK_HAL_SetSource(g_simBaseAddr[0], kClockTimeSrc, 2);
-}
-
-/*******************************************************************************
- * EOF
- ******************************************************************************/
-
-