+++ /dev/null
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
-#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PC_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PC_9,
- D3 = PB_15,
- D4 = PA_8,
- D5 = PA_7,
- D6 = PB_13,
- D7 = PC_2,
- D8 = PA_9,
- D9 = PB_1,
- D10 = PC_8,
- D11 = PB_5,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = D3,
- LED2 = D3,
- LED3 = D3,
- LED4 = D3,
- SERIAL_TX = D1,
- SERIAL_RX = D0,
- SERIAL_RTS = A1,
- SERIAL_CTS = A0,
- SERIAL_DCD = D5,
- SERIAL_DSR = D8,
- SERIAL_DTR = D4,
- SERIAL_RI = D9,
- USBTX = PB_6,
- USBRX = PB_7,
- RADIO_TX = PC_7,
- RADIO_RX = PC_6,
- RADIO_RTS = PB_10,
- RADIO_CTS = PB_12,
- RADIO_DCD = D5,
- RADIO_DSR = D8,
- RADIO_DTR = D4,
- RADIO_RI = D9,
- I2C_SCL = D15,
- I2C_SDA = D14,
- SPI_MOSI = PC_12,
- SPI_MISO = PC_11,
- SPI_SCK = PC_10,
- SPI_CS1 = PA_4,
- SPI_CS2 = PB_14,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif