+++ /dev/null
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-
-#include "PeripheralPins.h"
-
-// =====
-// Note: Commented lines are alternative possibilities which are not used per default.
-// If you change them, you will have also to modify the corresponding xxx_api.c file
-// for pwmout, analogin, analogout, ...
-// =====
-
-//*** ADC ***
-
-const PinMap PinMap_ADC[] = {
- {PA_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN0
- {PA_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN1
- {PA_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN2
- {PA_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN3
- {PA_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN4
- {PA_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN5
- {PA_6, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN6
- {PA_7, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN7
- {PB_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN8
- {PB_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN9
- {PC_0, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN10
- {PC_1, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN11
- {PC_2, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN12
- {PC_3, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN13
- {PC_4, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN14
- {PC_5, ADC_1, STM_PIN_DATA(STM_MODE_ANALOG, GPIO_NOPULL, 0)}, // ADC12_IN15
- {NC, NC, 0}
-};
-
-//*** I2C ***
-
-const PinMap PinMap_I2C_SDA[] = {
- {PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
- {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)}, // GPIO_Remap_I2C1
- {PB_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_I2C_SCL[] = {
- {PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
- {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 2)}, // GPIO_Remap_I2C1
- {PB_10, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
-
-//*** PWM ***
-
-// TIM4 cannot be used because already used by the us_ticker
-const PinMap PinMap_PWM[] = {
- {PA_1, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM2_CH2 - Default
- {PA_2, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM2_CH3 - Default (warning: not connected on D1 per default)
- {PA_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM2_CH4 - Default (warning: not connected on D0 per default)
- {PA_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM3_CH1 - Default
- {PA_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM3_CH2 - Default
-// {PA_7, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 6)}, // TIM1_CH1N - GPIO_PartialRemap_TIM1
- {PA_8, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH1 - Default
- {PA_9, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH2 - Default
- {PA_10, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH3 - Default
- {PA_11, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH4 - Default
- {PA_15, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 8)}, // TIM2_CH1_ETR - GPIO_FullRemap_TIM2
-
- {PB_0, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM3_CH3 - Default
-// {PB_0, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 6)}, // TIM1_CH2N - GPIO_PartialRemap_TIM1
- {PB_1, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM3_CH4 - Default
-// {PB_1, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 6)}, // TIM1_CH3N - GPIO_PartialRemap_TIM1
- {PB_3, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 8)}, // TIM2_CH2 - GPIO_FullRemap_TIM2
- {PB_4, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 7)}, // TIM3_CH1 - GPIO_PartialRemap_TIM3
- {PB_5, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 7)}, // TIM3_CH2 - GPIO_PartialRemap_TIM3
-// {PB_6, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM4_CH1 - Default (used by ticker)
-// {PB_7, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM4_CH2 - Default (used by ticker)
-// {PB_8, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM4_CH3 - Default (used by ticker)
-// {PB_9, PWM_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM4_CH4 - Default (used by ticker)
- {PB_10, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 8)}, // TIM2_CH3 - GPIO_FullRemap_TIM2
- {PB_11, PWM_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 8)}, // TIM2_CH4 - GPIO_FullRemap_TIM2
- {PB_13, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH1N - Default
- {PB_14, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH2N - Default
- {PB_15, PWM_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)}, // TIM1_CH3N - Default
-
- {PC_6, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 9)}, // TIM3_CH1 - GPIO_FullRemap_TIM3
- {PC_7, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 9)}, // TIM3_CH2 - GPIO_FullRemap_TIM3
- {PC_8, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 9)}, // TIM3_CH3 - GPIO_FullRemap_TIM3
- {PC_9, PWM_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 9)}, // TIM3_CH4 - GPIO_FullRemap_TIM3
- {NC, NC, 0}
-};
-
-//*** SERIAL ***
-
-const PinMap PinMap_UART_TX[] = {
- {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
- {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
- {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
- {PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 0)},
- {PC_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
- {NC, NC, 0}
-};
-
-const PinMap PinMap_UART_RX[] = {
- {PA_3, UART_2, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
- {PA_10, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
- {PB_7, UART_1, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 3)}, // GPIO_Remap_USART1
- {PB_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 0)},
- {PC_11, UART_3, STM_PIN_DATA(STM_MODE_INPUT, GPIO_PULLUP, 5)}, // GPIO_PartialRemap_USART3
- {NC, NC, 0}
-};
-
-//*** SPI ***
-
-const PinMap PinMap_SPI_MOSI[] = {
- {PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
- {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_MISO[] = {
- {PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
- {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SCLK[] = {
- {PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
- {PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
-
-const PinMap PinMap_SPI_SSEL[] = {
- {PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 1)}, // GPIO_Remap_SPI1
- {PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, 0)},
- {NC, NC, 0}
-};
projects / qmk_firmware.git / blobdiff