Merge commit '1fe4406f374291ab2e86e95a97341fd9c475fcb8'

[qmk_firmware.git] / tmk_core / tool / mbed / mbed-sdk / libraries / mbed / targets / hal / TARGET_NXP / TARGET_LPC81X / sleep.c

diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC81X/sleep.c b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC81X/sleep.c
new file mode 100644 (file)
index 0000000..4d2232a
--- /dev/null
+++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC81X/sleep.c
@@ -0,0 +1,82 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "sleep_api.h"
+#include "cmsis.h"
+ 
+ 
+//#define DEEPSLEEP
+#define POWERDOWN
+ 
+void sleep(void) {  
+    //Normal sleep mode for PCON:
+    LPC_PMU->PCON &= ~0x03;
+    
+    //Normal sleep mode for ARM core:
+    SCB->SCR = 0;
+    
+    //And go to sleep
+    __WFI();
+}
+ 
+ 
+ 
+//Deepsleep/powerdown modes assume the device is configured to use its internal RC oscillator directly
+ 
+#ifdef DEEPSLEEP
+void deepsleep(void) {
+    //Deep sleep in PCON
+    LPC_PMU->PCON &= ~0x03;
+    LPC_PMU->PCON |= 0x01;
+    
+    //If brownout detection and WDT are enabled, keep them enabled during sleep
+    LPC_SYSCON->PDSLEEPCFG = LPC_SYSCON->PDRUNCFG;
+    
+    //After wakeup same stuff as currently enabled:
+    LPC_SYSCON->PDAWAKECFG = LPC_SYSCON->PDRUNCFG;
+    
+    //All interrupts may wake up:
+    LPC_SYSCON->STARTERP0 = 0xFF;
+    LPC_SYSCON->STARTERP1 = 0xFFFF;
+    
+    //Deep sleep for ARM core:
+    SCB->SCR = 1<<2;
+    
+    __WFI();
+}
+#endif
+ 
+#ifdef POWERDOWN
+void deepsleep(void) {
+    //Powerdown in PCON
+    LPC_PMU->PCON &= ~0x03;
+    LPC_PMU->PCON |= 0x02;
+    
+    //If brownout detection and WDT are enabled, keep them enabled during sleep
+    LPC_SYSCON->PDSLEEPCFG = LPC_SYSCON->PDRUNCFG;
+    
+    //After wakeup same stuff as currently enabled:
+    LPC_SYSCON->PDAWAKECFG = LPC_SYSCON->PDRUNCFG;
+    
+    //All interrupts may wake up:
+    LPC_SYSCON->STARTERP0 = 0xFF;
+    LPC_SYSCON->STARTERP1 = 0xFFFF;
+    
+    //Deep sleep for ARM core:
+    SCB->SCR = 1<<2;
+    
+    __WFI();
+}
+#endif