+++ /dev/null
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "rtc_api.h"
-
-// ensure rtc is running (unchanged if already running)
-
-/* Setup the RTC based on a time structure, ensuring RTC is enabled
- *
- * Can be clocked by a 32.768KHz oscillator or prescale divider based on the APB clock
- * - We want to use the 32khz clock, allowing for sleep mode
- *
- * Most registers are not changed by a Reset
- * - We must initialize these registers between power-on and setting the RTC into operation
-
- * Clock Control Register
- * RTC_CCR[0] : Enable - 0 = Disabled, 1 = Enabled
- * RTC_CCR[1] : Reset - 0 = Normal, 1 = Reset
- *
- * The RTC may already be running, so we should set it up
- * without impacting if it is the case
- */
-void rtc_init(void) {
- LPC_SC->PCONP |= 0x200; // Ensure power is on
- LPC_RTC->CCR = 0x00;
-
- LPC_RTC->CCR |= 1 << 0; // Ensure the RTC is enabled
-}
-
-void rtc_free(void) {
- // [TODO]
-}
-
-/*
- * Little check routine to see if the RTC has been enabled
- *
- * Clock Control Register
- * RTC_CCR[0] : 0 = Disabled, 1 = Enabled
- *
- */
-int rtc_isenabled(void) {
- return(((LPC_RTC->CCR) & 0x01) != 0);
-}
-
-/*
- * RTC Registers
- * RTC_SEC Seconds 0-59
- * RTC_MIN Minutes 0-59
- * RTC_HOUR Hour 0-23
- * RTC_DOM Day of Month 1-28..31
- * RTC_DOW Day of Week 0-6
- * RTC_DOY Day of Year 1-365
- * RTC_MONTH Month 1-12
- * RTC_YEAR Year 0-4095
- *
- * struct tm
- * tm_sec seconds after the minute 0-61
- * tm_min minutes after the hour 0-59
- * tm_hour hours since midnight 0-23
- * tm_mday day of the month 1-31
- * tm_mon months since January 0-11
- * tm_year years since 1900
- * tm_wday days since Sunday 0-6
- * tm_yday days since January 1 0-365
- * tm_isdst Daylight Saving Time flag
- */
-time_t rtc_read(void) {
- // Setup a tm structure based on the RTC
- struct tm timeinfo;
- timeinfo.tm_sec = LPC_RTC->SEC;
- timeinfo.tm_min = LPC_RTC->MIN;
- timeinfo.tm_hour = LPC_RTC->HOUR;
- timeinfo.tm_mday = LPC_RTC->DOM;
- timeinfo.tm_mon = LPC_RTC->MONTH - 1;
- timeinfo.tm_year = LPC_RTC->YEAR - 1900;
-
- // Convert to timestamp
- time_t t = mktime(&timeinfo);
-
- return t;
-}
-
-void rtc_write(time_t t) {
- // Convert the time in to a tm
- struct tm *timeinfo = localtime(&t);
-
- // Pause clock, and clear counter register (clears us count)
- LPC_RTC->CCR |= 2;
-
- // Set the RTC
- LPC_RTC->SEC = timeinfo->tm_sec;
- LPC_RTC->MIN = timeinfo->tm_min;
- LPC_RTC->HOUR = timeinfo->tm_hour;
- LPC_RTC->DOM = timeinfo->tm_mday;
- LPC_RTC->MONTH = timeinfo->tm_mon + 1;
- LPC_RTC->YEAR = timeinfo->tm_year + 1900;
-
- // Restart clock
- LPC_RTC->CCR &= ~((uint32_t)2);
-}