Cleans up quantum/keymap situation, removes extra lufa folders (#416)

[qmk_firmware.git] / tmk_core / tool / mbed / mbed-sdk / libraries / mbed / targets / hal / TARGET_NXP / TARGET_LPC11UXX / TARGET_LPCCAPPUCCINO / PinNames.h

diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPCCAPPUCCINO/PinNames.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPCCAPPUCCINO/PinNames.h
deleted file mode 100644 (file)
index 0099540..0000000
--- a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPCCAPPUCCINO/PinNames.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2014 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
-    PIN_INPUT,
-    PIN_OUTPUT
-} PinDirection;
-
-#define PORT_SHIFT  5
-
-typedef enum {
-    // LPC11U Pin Names
-    P0_0 = 0,
-    P0_1 = 1,
-    P0_2 = 2,
-    P0_3 = 3,
-    P0_4 = 4,
-    P0_5 = 5,
-    P0_6 = 6,
-    P0_7 = 7,
-    P0_8 = 8,
-    P0_9 = 9,
-    P0_10 = 10,
-    P0_11 = 11,
-    P0_12 = 12,
-    P0_13 = 13,
-    P0_14 = 14,
-    P0_15 = 15,
-    P0_16 = 16,
-    P0_17 = 17,
-    P0_18 = 18,
-    P0_19 = 19,
-    P0_20 = 20,
-    P0_21 = 21,
-    P0_22 = 22,
-    P0_23 = 23,
-    P0_24 = 24,
-    P0_25 = 25,
-    P0_26 = 26,
-    P0_27 = 27,
-
-    P1_0 = 32,
-    P1_1 = 33,
-    P1_2 = 34,
-    P1_3 = 35,
-    P1_4 = 36,
-    P1_5 = 37,
-    P1_6 = 38,
-    P1_7 = 39,
-    P1_8 = 40,
-    P1_9 = 41,
-    P1_10 = 42,
-    P1_11 = 43,
-    P1_12 = 44,
-    P1_13 = 45,
-    P1_14 = 46,
-    P1_15 = 47,
-    P1_16 = 48,
-    P1_17 = 49,
-    P1_18 = 50,
-    P1_19 = 51,
-    P1_20 = 52,
-    P1_21 = 53,
-    P1_22 = 54,
-    P1_23 = 55,
-    P1_24 = 56,
-    P1_25 = 57,
-    P1_26 = 58,
-    P1_27 = 59,
-    P1_28 = 60,
-    P1_29 = 61,
-
-    P1_31 = 63,
-
-
-    // Other mbed Pin Names
-    LED1 = P1_19,
-    LED2 = P1_19,      // Negative On
-    LED3 = P1_19,
-    LED4 = P1_19,
-
-    UART_TX = P0_19,
-    UART_RX = P0_18,
-
-    // Not connected
-    NC = (int)0xFFFFFFFF,
-
-    // Standard but not supported pins
-    USBTX = NC,
-    USBRX = NC,
-
-} PinName;
-
-typedef enum {
-    CHANNEL0 = FLEX_INT0_IRQn,
-    CHANNEL1 = FLEX_INT1_IRQn,
-    CHANNEL2 = FLEX_INT2_IRQn,
-    CHANNEL3 = FLEX_INT3_IRQn,
-    CHANNEL4 = FLEX_INT4_IRQn,
-    CHANNEL5 = FLEX_INT5_IRQn,
-    CHANNEL6 = FLEX_INT6_IRQn,
-    CHANNEL7 = FLEX_INT7_IRQn
-} Channel;
-
-typedef enum {
-    PullUp = 2,
-    PullDown = 1,
-    PullNone = 0,
-    Repeater = 3,
-    OpenDrain = 4,
-    PullDefault = PullDown
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif