+++ /dev/null
-/*
-** ###################################################################
-** Compilers: Keil ARM C/C++ Compiler
-** Freescale C/C++ for Embedded ARM
-** GNU C Compiler
-** IAR ANSI C/C++ Compiler for ARM
-**
-** Reference manual: K64P144M120SF5RM, Rev.2, January 2014
-** Version: rev. 2.5, 2014-02-10
-** Build: b140604
-**
-** Abstract:
-** Extension to the CMSIS register access layer header.
-**
-** Copyright (c) 2014 Freescale Semiconductor, Inc.
-** All rights reserved.
-**
-** Redistribution and use in source and binary forms, with or without modification,
-** are permitted provided that the following conditions are met:
-**
-** o Redistributions of source code must retain the above copyright notice, this list
-** of conditions and the following disclaimer.
-**
-** o Redistributions in binary form must reproduce the above copyright notice, this
-** list of conditions and the following disclaimer in the documentation and/or
-** other materials provided with the distribution.
-**
-** o Neither the name of Freescale Semiconductor, Inc. nor the names of its
-** contributors may be used to endorse or promote products derived from this
-** software without specific prior written permission.
-**
-** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
-** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-**
-** http: www.freescale.com
-** mail: support@freescale.com
-**
-** Revisions:
-** - rev. 1.0 (2013-08-12)
-** Initial version.
-** - rev. 2.0 (2013-10-29)
-** Register accessor macros added to the memory map.
-** Symbols for Processor Expert memory map compatibility added to the memory map.
-** Startup file for gcc has been updated according to CMSIS 3.2.
-** System initialization updated.
-** MCG - registers updated.
-** PORTA, PORTB, PORTC, PORTE - registers for digital filter removed.
-** - rev. 2.1 (2013-10-30)
-** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled.
-** - rev. 2.2 (2013-12-09)
-** DMA - EARS register removed.
-** AIPS0, AIPS1 - MPRA register updated.
-** - rev. 2.3 (2014-01-24)
-** Update according to reference manual rev. 2
-** ENET, MCG, MCM, SIM, USB - registers updated
-** - rev. 2.4 (2014-02-10)
-** The declaration of clock configurations has been moved to separate header file system_MK64F12.h
-** Update of SystemInit() and SystemCoreClockUpdate() functions.
-** - rev. 2.5 (2014-02-10)
-** The declaration of clock configurations has been moved to separate header file system_MK64F12.h
-** Update of SystemInit() and SystemCoreClockUpdate() functions.
-** Module access macro module_BASES replaced by module_BASE_PTRS.
-**
-** ###################################################################
-*/
-
-/*
- * WARNING! DO NOT EDIT THIS FILE DIRECTLY!
- *
- * This file was generated automatically and any changes may be lost.
- */
-#ifndef __HW_SPI_REGISTERS_H__
-#define __HW_SPI_REGISTERS_H__
-
-#include "MK64F12.h"
-#include "fsl_bitaccess.h"
-
-/*
- * MK64F12 SPI
- *
- * Serial Peripheral Interface
- *
- * Registers defined in this header file:
- * - HW_SPI_MCR - Module Configuration Register
- * - HW_SPI_TCR - Transfer Count Register
- * - HW_SPI_CTARn - Clock and Transfer Attributes Register (In Master Mode)
- * - HW_SPI_CTARn_SLAVE - Clock and Transfer Attributes Register (In Slave Mode)
- * - HW_SPI_SR - Status Register
- * - HW_SPI_RSER - DMA/Interrupt Request Select and Enable Register
- * - HW_SPI_PUSHR - PUSH TX FIFO Register In Master Mode
- * - HW_SPI_PUSHR_SLAVE - PUSH TX FIFO Register In Slave Mode
- * - HW_SPI_POPR - POP RX FIFO Register
- * - HW_SPI_TXFRn - Transmit FIFO Registers
- * - HW_SPI_RXFRn - Receive FIFO Registers
- *
- * - hw_spi_t - Struct containing all module registers.
- */
-
-#define HW_SPI_INSTANCE_COUNT (3U) /*!< Number of instances of the SPI module. */
-#define HW_SPI0 (0U) /*!< Instance number for SPI0. */
-#define HW_SPI1 (1U) /*!< Instance number for SPI1. */
-#define HW_SPI2 (2U) /*!< Instance number for SPI2. */
-
-/*******************************************************************************
- * HW_SPI_MCR - Module Configuration Register
- ******************************************************************************/
-
-/*!
- * @brief HW_SPI_MCR - Module Configuration Register (RW)
- *
- * Reset value: 0x00004001U
- *
- * Contains bits to configure various attributes associated with the module
- * operations. The HALT and MDIS bits can be changed at any time, but the effect
- * takes place only on the next frame boundary. Only the HALT and MDIS bits in the
- * MCR can be changed, while the module is in the Running state.
- */
-typedef union _hw_spi_mcr
-{
- uint32_t U;
- struct _hw_spi_mcr_bitfields
- {
- uint32_t HALT : 1; /*!< [0] Halt */
- uint32_t RESERVED0 : 7; /*!< [7:1] */
- uint32_t SMPL_PT : 2; /*!< [9:8] Sample Point */
- uint32_t CLR_RXF : 1; /*!< [10] */
- uint32_t CLR_TXF : 1; /*!< [11] Clear TX FIFO */
- uint32_t DIS_RXF : 1; /*!< [12] Disable Receive FIFO */
- uint32_t DIS_TXF : 1; /*!< [13] Disable Transmit FIFO */
- uint32_t MDIS : 1; /*!< [14] Module Disable */
- uint32_t DOZE : 1; /*!< [15] Doze Enable */
- uint32_t PCSIS : 6; /*!< [21:16] Peripheral Chip Select x Inactive
- * State */
- uint32_t RESERVED1 : 2; /*!< [23:22] */
- uint32_t ROOE : 1; /*!< [24] Receive FIFO Overflow Overwrite Enable */
- uint32_t PCSSE : 1; /*!< [25] Peripheral Chip Select Strobe Enable */
- uint32_t MTFE : 1; /*!< [26] Modified Timing Format Enable */
- uint32_t FRZ : 1; /*!< [27] Freeze */
- uint32_t DCONF : 2; /*!< [29:28] SPI Configuration. */
- uint32_t CONT_SCKE : 1; /*!< [30] Continuous SCK Enable */
- uint32_t MSTR : 1; /*!< [31] Master/Slave Mode Select */
- } B;
-} hw_spi_mcr_t;
-
-/*!
- * @name Constants and macros for entire SPI_MCR register
- */
-/*@{*/
-#define HW_SPI_MCR_ADDR(x) ((x) + 0x0U)
-
-#define HW_SPI_MCR(x) (*(__IO hw_spi_mcr_t *) HW_SPI_MCR_ADDR(x))
-#define HW_SPI_MCR_RD(x) (HW_SPI_MCR(x).U)
-#define HW_SPI_MCR_WR(x, v) (HW_SPI_MCR(x).U = (v))
-#define HW_SPI_MCR_SET(x, v) (HW_SPI_MCR_WR(x, HW_SPI_MCR_RD(x) | (v)))
-#define HW_SPI_MCR_CLR(x, v) (HW_SPI_MCR_WR(x, HW_SPI_MCR_RD(x) & ~(v)))
-#define HW_SPI_MCR_TOG(x, v) (HW_SPI_MCR_WR(x, HW_SPI_MCR_RD(x) ^ (v)))
-/*@}*/
-
-/*
- * Constants & macros for individual SPI_MCR bitfields
- */
-
-/*!
- * @name Register SPI_MCR, field HALT[0] (RW)
- *
- * The HALT bit starts and stops frame transfers. See Start and Stop of Module
- * transfers
- *
- * Values:
- * - 0 - Start transfers.
- * - 1 - Stop transfers.
- */
-/*@{*/
-#define BP_SPI_MCR_HALT (0U) /*!< Bit position for SPI_MCR_HALT. */
-#define BM_SPI_MCR_HALT (0x00000001U) /*!< Bit mask for SPI_MCR_HALT. */
-#define BS_SPI_MCR_HALT (1U) /*!< Bit field size in bits for SPI_MCR_HALT. */
-
-/*! @brief Read current value of the SPI_MCR_HALT field. */
-#define BR_SPI_MCR_HALT(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_HALT))
-
-/*! @brief Format value for bitfield SPI_MCR_HALT. */
-#define BF_SPI_MCR_HALT(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_HALT) & BM_SPI_MCR_HALT)
-
-/*! @brief Set the HALT field to a new value. */
-#define BW_SPI_MCR_HALT(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_HALT) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_MCR, field SMPL_PT[9:8] (RW)
- *
- * Controls when the module master samples SIN in Modified Transfer Format. This
- * field is valid only when CPHA bit in CTARn[CPHA] is 0.
- *
- * Values:
- * - 00 - 0 protocol clock cycles between SCK edge and SIN sample
- * - 01 - 1 protocol clock cycle between SCK edge and SIN sample
- * - 10 - 2 protocol clock cycles between SCK edge and SIN sample
- * - 11 - Reserved
- */
-/*@{*/
-#define BP_SPI_MCR_SMPL_PT (8U) /*!< Bit position for SPI_MCR_SMPL_PT. */
-#define BM_SPI_MCR_SMPL_PT (0x00000300U) /*!< Bit mask for SPI_MCR_SMPL_PT. */
-#define BS_SPI_MCR_SMPL_PT (2U) /*!< Bit field size in bits for SPI_MCR_SMPL_PT. */
-
-/*! @brief Read current value of the SPI_MCR_SMPL_PT field. */
-#define BR_SPI_MCR_SMPL_PT(x) (HW_SPI_MCR(x).B.SMPL_PT)
-
-/*! @brief Format value for bitfield SPI_MCR_SMPL_PT. */
-#define BF_SPI_MCR_SMPL_PT(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_SMPL_PT) & BM_SPI_MCR_SMPL_PT)
-
-/*! @brief Set the SMPL_PT field to a new value. */
-#define BW_SPI_MCR_SMPL_PT(x, v) (HW_SPI_MCR_WR(x, (HW_SPI_MCR_RD(x) & ~BM_SPI_MCR_SMPL_PT) | BF_SPI_MCR_SMPL_PT(v)))
-/*@}*/
-
-/*!
- * @name Register SPI_MCR, field CLR_RXF[10] (WORZ)
- *
- * Flushes the RX FIFO. Writing a 1 to CLR_RXF clears the RX Counter. The
- * CLR_RXF bit is always read as zero.
- *
- * Values:
- * - 0 - Do not clear the RX FIFO counter.
- * - 1 - Clear the RX FIFO counter.
- */
-/*@{*/
-#define BP_SPI_MCR_CLR_RXF (10U) /*!< Bit position for SPI_MCR_CLR_RXF. */
-#define BM_SPI_MCR_CLR_RXF (0x00000400U) /*!< Bit mask for SPI_MCR_CLR_RXF. */
-#define BS_SPI_MCR_CLR_RXF (1U) /*!< Bit field size in bits for SPI_MCR_CLR_RXF. */
-
-/*! @brief Format value for bitfield SPI_MCR_CLR_RXF. */
-#define BF_SPI_MCR_CLR_RXF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_CLR_RXF) & BM_SPI_MCR_CLR_RXF)
-
-/*! @brief Set the CLR_RXF field to a new value. */
-#define BW_SPI_MCR_CLR_RXF(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_CLR_RXF) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_MCR, field CLR_TXF[11] (WORZ)
- *
- * Flushes the TX FIFO. Writing a 1 to CLR_TXF clears the TX FIFO Counter. The
- * CLR_TXF bit is always read as zero.
- *
- * Values:
- * - 0 - Do not clear the TX FIFO counter.
- * - 1 - Clear the TX FIFO counter.
- */
-/*@{*/
-#define BP_SPI_MCR_CLR_TXF (11U) /*!< Bit position for SPI_MCR_CLR_TXF. */
-#define BM_SPI_MCR_CLR_TXF (0x00000800U) /*!< Bit mask for SPI_MCR_CLR_TXF. */
-#define BS_SPI_MCR_CLR_TXF (1U) /*!< Bit field size in bits for SPI_MCR_CLR_TXF. */
-
-/*! @brief Format value for bitfield SPI_MCR_CLR_TXF. */
-#define BF_SPI_MCR_CLR_TXF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_CLR_TXF) & BM_SPI_MCR_CLR_TXF)
-
-/*! @brief Set the CLR_TXF field to a new value. */
-#define BW_SPI_MCR_CLR_TXF(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_CLR_TXF) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_MCR, field DIS_RXF[12] (RW)
- *
- * When the RX FIFO is disabled, the receive part of the module operates as a
- * simplified double-buffered SPI. This bit can only be written when the MDIS bit
- * is cleared.
- *
- * Values:
- * - 0 - RX FIFO is enabled.
- * - 1 - RX FIFO is disabled.
- */
-/*@{*/
-#define BP_SPI_MCR_DIS_RXF (12U) /*!< Bit position for SPI_MCR_DIS_RXF. */
-#define BM_SPI_MCR_DIS_RXF (0x00001000U) /*!< Bit mask for SPI_MCR_DIS_RXF. */
-#define BS_SPI_MCR_DIS_RXF (1U) /*!< Bit field size in bits for SPI_MCR_DIS_RXF. */
-
-/*! @brief Read current value of the SPI_MCR_DIS_RXF field. */
-#define BR_SPI_MCR_DIS_RXF(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_DIS_RXF))
-
-/*! @brief Format value for bitfield SPI_MCR_DIS_RXF. */
-#define BF_SPI_MCR_DIS_RXF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_DIS_RXF) & BM_SPI_MCR_DIS_RXF)
-
-/*! @brief Set the DIS_RXF field to a new value. */
-#define BW_SPI_MCR_DIS_RXF(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_DIS_RXF) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_MCR, field DIS_TXF[13] (RW)
- *
- * When the TX FIFO is disabled, the transmit part of the module operates as a
- * simplified double-buffered SPI. This bit can be written only when the MDIS bit
- * is cleared.
- *
- * Values:
- * - 0 - TX FIFO is enabled.
- * - 1 - TX FIFO is disabled.
- */
-/*@{*/
-#define BP_SPI_MCR_DIS_TXF (13U) /*!< Bit position for SPI_MCR_DIS_TXF. */
-#define BM_SPI_MCR_DIS_TXF (0x00002000U) /*!< Bit mask for SPI_MCR_DIS_TXF. */
-#define BS_SPI_MCR_DIS_TXF (1U) /*!< Bit field size in bits for SPI_MCR_DIS_TXF. */
-
-/*! @brief Read current value of the SPI_MCR_DIS_TXF field. */
-#define BR_SPI_MCR_DIS_TXF(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_DIS_TXF))
-
-/*! @brief Format value for bitfield SPI_MCR_DIS_TXF. */
-#define BF_SPI_MCR_DIS_TXF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_DIS_TXF) & BM_SPI_MCR_DIS_TXF)
-
-/*! @brief Set the DIS_TXF field to a new value. */
-#define BW_SPI_MCR_DIS_TXF(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_DIS_TXF) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_MCR, field MDIS[14] (RW)
- *
- * Allows the clock to be stopped to the non-memory mapped logic in the module
- * effectively putting it in a software-controlled power-saving state. The reset
- * value of the MDIS bit is parameterized, with a default reset value of 0. When
- * the module is used in Slave Mode, we recommend leaving this bit 0, because a
- * slave doesn't have control over master transactions.
- *
- * Values:
- * - 0 - Enables the module clocks.
- * - 1 - Allows external logic to disable the module clocks.
- */
-/*@{*/
-#define BP_SPI_MCR_MDIS (14U) /*!< Bit position for SPI_MCR_MDIS. */
-#define BM_SPI_MCR_MDIS (0x00004000U) /*!< Bit mask for SPI_MCR_MDIS. */
-#define BS_SPI_MCR_MDIS (1U) /*!< Bit field size in bits for SPI_MCR_MDIS. */
-
-/*! @brief Read current value of the SPI_MCR_MDIS field. */
-#define BR_SPI_MCR_MDIS(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_MDIS))
-
-/*! @brief Format value for bitfield SPI_MCR_MDIS. */
-#define BF_SPI_MCR_MDIS(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_MDIS) & BM_SPI_MCR_MDIS)
-
-/*! @brief Set the MDIS field to a new value. */
-#define BW_SPI_MCR_MDIS(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_MDIS) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_MCR, field DOZE[15] (RW)
- *
- * Provides support for an externally controlled Doze mode power-saving
- * mechanism.
- *
- * Values:
- * - 0 - Doze mode has no effect on the module.
- * - 1 - Doze mode disables the module.
- */
-/*@{*/
-#define BP_SPI_MCR_DOZE (15U) /*!< Bit position for SPI_MCR_DOZE. */
-#define BM_SPI_MCR_DOZE (0x00008000U) /*!< Bit mask for SPI_MCR_DOZE. */
-#define BS_SPI_MCR_DOZE (1U) /*!< Bit field size in bits for SPI_MCR_DOZE. */
-
-/*! @brief Read current value of the SPI_MCR_DOZE field. */
-#define BR_SPI_MCR_DOZE(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_DOZE))
-
-/*! @brief Format value for bitfield SPI_MCR_DOZE. */
-#define BF_SPI_MCR_DOZE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_DOZE) & BM_SPI_MCR_DOZE)
-
-/*! @brief Set the DOZE field to a new value. */
-#define BW_SPI_MCR_DOZE(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_DOZE) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_MCR, field PCSIS[21:16] (RW)
- *
- * Determines the inactive state of PCSx.
- *
- * Values:
- * - 0 - The inactive state of PCSx is low.
- * - 1 - The inactive state of PCSx is high.
- */
-/*@{*/
-#define BP_SPI_MCR_PCSIS (16U) /*!< Bit position for SPI_MCR_PCSIS. */
-#define BM_SPI_MCR_PCSIS (0x003F0000U) /*!< Bit mask for SPI_MCR_PCSIS. */
-#define BS_SPI_MCR_PCSIS (6U) /*!< Bit field size in bits for SPI_MCR_PCSIS. */
-
-/*! @brief Read current value of the SPI_MCR_PCSIS field. */
-#define BR_SPI_MCR_PCSIS(x) (HW_SPI_MCR(x).B.PCSIS)
-
-/*! @brief Format value for bitfield SPI_MCR_PCSIS. */
-#define BF_SPI_MCR_PCSIS(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_PCSIS) & BM_SPI_MCR_PCSIS)
-
-/*! @brief Set the PCSIS field to a new value. */
-#define BW_SPI_MCR_PCSIS(x, v) (HW_SPI_MCR_WR(x, (HW_SPI_MCR_RD(x) & ~BM_SPI_MCR_PCSIS) | BF_SPI_MCR_PCSIS(v)))
-/*@}*/
-
-/*!
- * @name Register SPI_MCR, field ROOE[24] (RW)
- *
- * In the RX FIFO overflow condition, configures the module to ignore the
- * incoming serial data or overwrite existing data. If the RX FIFO is full and new data
- * is received, the data from the transfer, generating the overflow, is ignored
- * or shifted into the shift register.
- *
- * Values:
- * - 0 - Incoming data is ignored.
- * - 1 - Incoming data is shifted into the shift register.
- */
-/*@{*/
-#define BP_SPI_MCR_ROOE (24U) /*!< Bit position for SPI_MCR_ROOE. */
-#define BM_SPI_MCR_ROOE (0x01000000U) /*!< Bit mask for SPI_MCR_ROOE. */
-#define BS_SPI_MCR_ROOE (1U) /*!< Bit field size in bits for SPI_MCR_ROOE. */
-
-/*! @brief Read current value of the SPI_MCR_ROOE field. */
-#define BR_SPI_MCR_ROOE(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_ROOE))
-
-/*! @brief Format value for bitfield SPI_MCR_ROOE. */
-#define BF_SPI_MCR_ROOE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_ROOE) & BM_SPI_MCR_ROOE)
-
-/*! @brief Set the ROOE field to a new value. */
-#define BW_SPI_MCR_ROOE(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_ROOE) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_MCR, field PCSSE[25] (RW)
- *
- * Enables the PCS5/ PCSS to operate as a PCS Strobe output signal.
- *
- * Values:
- * - 0 - PCS5/ PCSS is used as the Peripheral Chip Select[5] signal.
- * - 1 - PCS5/ PCSS is used as an active-low PCS Strobe signal.
- */
-/*@{*/
-#define BP_SPI_MCR_PCSSE (25U) /*!< Bit position for SPI_MCR_PCSSE. */
-#define BM_SPI_MCR_PCSSE (0x02000000U) /*!< Bit mask for SPI_MCR_PCSSE. */
-#define BS_SPI_MCR_PCSSE (1U) /*!< Bit field size in bits for SPI_MCR_PCSSE. */
-
-/*! @brief Read current value of the SPI_MCR_PCSSE field. */
-#define BR_SPI_MCR_PCSSE(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_PCSSE))
-
-/*! @brief Format value for bitfield SPI_MCR_PCSSE. */
-#define BF_SPI_MCR_PCSSE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_PCSSE) & BM_SPI_MCR_PCSSE)
-
-/*! @brief Set the PCSSE field to a new value. */
-#define BW_SPI_MCR_PCSSE(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_PCSSE) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_MCR, field MTFE[26] (RW)
- *
- * Enables a modified transfer format to be used.
- *
- * Values:
- * - 0 - Modified SPI transfer format disabled.
- * - 1 - Modified SPI transfer format enabled.
- */
-/*@{*/
-#define BP_SPI_MCR_MTFE (26U) /*!< Bit position for SPI_MCR_MTFE. */
-#define BM_SPI_MCR_MTFE (0x04000000U) /*!< Bit mask for SPI_MCR_MTFE. */
-#define BS_SPI_MCR_MTFE (1U) /*!< Bit field size in bits for SPI_MCR_MTFE. */
-
-/*! @brief Read current value of the SPI_MCR_MTFE field. */
-#define BR_SPI_MCR_MTFE(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_MTFE))
-
-/*! @brief Format value for bitfield SPI_MCR_MTFE. */
-#define BF_SPI_MCR_MTFE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_MTFE) & BM_SPI_MCR_MTFE)
-
-/*! @brief Set the MTFE field to a new value. */
-#define BW_SPI_MCR_MTFE(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_MTFE) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_MCR, field FRZ[27] (RW)
- *
- * Enables transfers to be stopped on the next frame boundary when the device
- * enters Debug mode.
- *
- * Values:
- * - 0 - Do not halt serial transfers in Debug mode.
- * - 1 - Halt serial transfers in Debug mode.
- */
-/*@{*/
-#define BP_SPI_MCR_FRZ (27U) /*!< Bit position for SPI_MCR_FRZ. */
-#define BM_SPI_MCR_FRZ (0x08000000U) /*!< Bit mask for SPI_MCR_FRZ. */
-#define BS_SPI_MCR_FRZ (1U) /*!< Bit field size in bits for SPI_MCR_FRZ. */
-
-/*! @brief Read current value of the SPI_MCR_FRZ field. */
-#define BR_SPI_MCR_FRZ(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_FRZ))
-
-/*! @brief Format value for bitfield SPI_MCR_FRZ. */
-#define BF_SPI_MCR_FRZ(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_FRZ) & BM_SPI_MCR_FRZ)
-
-/*! @brief Set the FRZ field to a new value. */
-#define BW_SPI_MCR_FRZ(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_FRZ) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_MCR, field DCONF[29:28] (RO)
- *
- * Selects among the different configurations of the module.
- *
- * Values:
- * - 00 - SPI
- * - 01 - Reserved
- * - 10 - Reserved
- * - 11 - Reserved
- */
-/*@{*/
-#define BP_SPI_MCR_DCONF (28U) /*!< Bit position for SPI_MCR_DCONF. */
-#define BM_SPI_MCR_DCONF (0x30000000U) /*!< Bit mask for SPI_MCR_DCONF. */
-#define BS_SPI_MCR_DCONF (2U) /*!< Bit field size in bits for SPI_MCR_DCONF. */
-
-/*! @brief Read current value of the SPI_MCR_DCONF field. */
-#define BR_SPI_MCR_DCONF(x) (HW_SPI_MCR(x).B.DCONF)
-/*@}*/
-
-/*!
- * @name Register SPI_MCR, field CONT_SCKE[30] (RW)
- *
- * Enables the Serial Communication Clock (SCK) to run continuously.
- *
- * Values:
- * - 0 - Continuous SCK disabled.
- * - 1 - Continuous SCK enabled.
- */
-/*@{*/
-#define BP_SPI_MCR_CONT_SCKE (30U) /*!< Bit position for SPI_MCR_CONT_SCKE. */
-#define BM_SPI_MCR_CONT_SCKE (0x40000000U) /*!< Bit mask for SPI_MCR_CONT_SCKE. */
-#define BS_SPI_MCR_CONT_SCKE (1U) /*!< Bit field size in bits for SPI_MCR_CONT_SCKE. */
-
-/*! @brief Read current value of the SPI_MCR_CONT_SCKE field. */
-#define BR_SPI_MCR_CONT_SCKE(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_CONT_SCKE))
-
-/*! @brief Format value for bitfield SPI_MCR_CONT_SCKE. */
-#define BF_SPI_MCR_CONT_SCKE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_CONT_SCKE) & BM_SPI_MCR_CONT_SCKE)
-
-/*! @brief Set the CONT_SCKE field to a new value. */
-#define BW_SPI_MCR_CONT_SCKE(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_CONT_SCKE) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_MCR, field MSTR[31] (RW)
- *
- * Enables either Master mode (if supported) or Slave mode (if supported)
- * operation.
- *
- * Values:
- * - 0 - Enables Slave mode
- * - 1 - Enables Master mode
- */
-/*@{*/
-#define BP_SPI_MCR_MSTR (31U) /*!< Bit position for SPI_MCR_MSTR. */
-#define BM_SPI_MCR_MSTR (0x80000000U) /*!< Bit mask for SPI_MCR_MSTR. */
-#define BS_SPI_MCR_MSTR (1U) /*!< Bit field size in bits for SPI_MCR_MSTR. */
-
-/*! @brief Read current value of the SPI_MCR_MSTR field. */
-#define BR_SPI_MCR_MSTR(x) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_MSTR))
-
-/*! @brief Format value for bitfield SPI_MCR_MSTR. */
-#define BF_SPI_MCR_MSTR(v) ((uint32_t)((uint32_t)(v) << BP_SPI_MCR_MSTR) & BM_SPI_MCR_MSTR)
-
-/*! @brief Set the MSTR field to a new value. */
-#define BW_SPI_MCR_MSTR(x, v) (BITBAND_ACCESS32(HW_SPI_MCR_ADDR(x), BP_SPI_MCR_MSTR) = (v))
-/*@}*/
-
-/*******************************************************************************
- * HW_SPI_TCR - Transfer Count Register
- ******************************************************************************/
-
-/*!
- * @brief HW_SPI_TCR - Transfer Count Register (RW)
- *
- * Reset value: 0x00000000U
- *
- * TCR contains a counter that indicates the number of SPI transfers made. The
- * transfer counter is intended to assist in queue management. Do not write the
- * TCR when the module is in the Running state.
- */
-typedef union _hw_spi_tcr
-{
- uint32_t U;
- struct _hw_spi_tcr_bitfields
- {
- uint32_t RESERVED0 : 16; /*!< [15:0] */
- uint32_t SPI_TCNT : 16; /*!< [31:16] SPI Transfer Counter */
- } B;
-} hw_spi_tcr_t;
-
-/*!
- * @name Constants and macros for entire SPI_TCR register
- */
-/*@{*/
-#define HW_SPI_TCR_ADDR(x) ((x) + 0x8U)
-
-#define HW_SPI_TCR(x) (*(__IO hw_spi_tcr_t *) HW_SPI_TCR_ADDR(x))
-#define HW_SPI_TCR_RD(x) (HW_SPI_TCR(x).U)
-#define HW_SPI_TCR_WR(x, v) (HW_SPI_TCR(x).U = (v))
-#define HW_SPI_TCR_SET(x, v) (HW_SPI_TCR_WR(x, HW_SPI_TCR_RD(x) | (v)))
-#define HW_SPI_TCR_CLR(x, v) (HW_SPI_TCR_WR(x, HW_SPI_TCR_RD(x) & ~(v)))
-#define HW_SPI_TCR_TOG(x, v) (HW_SPI_TCR_WR(x, HW_SPI_TCR_RD(x) ^ (v)))
-/*@}*/
-
-/*
- * Constants & macros for individual SPI_TCR bitfields
- */
-
-/*!
- * @name Register SPI_TCR, field SPI_TCNT[31:16] (RW)
- *
- * Counts the number of SPI transfers the module makes. The SPI_TCNT field
- * increments every time the last bit of an SPI frame is transmitted. A value written
- * to SPI_TCNT presets the counter to that value. SPI_TCNT is reset to zero at
- * the beginning of the frame when the CTCNT field is set in the executing SPI
- * command. The Transfer Counter wraps around; incrementing the counter past 65535
- * resets the counter to zero.
- */
-/*@{*/
-#define BP_SPI_TCR_SPI_TCNT (16U) /*!< Bit position for SPI_TCR_SPI_TCNT. */
-#define BM_SPI_TCR_SPI_TCNT (0xFFFF0000U) /*!< Bit mask for SPI_TCR_SPI_TCNT. */
-#define BS_SPI_TCR_SPI_TCNT (16U) /*!< Bit field size in bits for SPI_TCR_SPI_TCNT. */
-
-/*! @brief Read current value of the SPI_TCR_SPI_TCNT field. */
-#define BR_SPI_TCR_SPI_TCNT(x) (HW_SPI_TCR(x).B.SPI_TCNT)
-
-/*! @brief Format value for bitfield SPI_TCR_SPI_TCNT. */
-#define BF_SPI_TCR_SPI_TCNT(v) ((uint32_t)((uint32_t)(v) << BP_SPI_TCR_SPI_TCNT) & BM_SPI_TCR_SPI_TCNT)
-
-/*! @brief Set the SPI_TCNT field to a new value. */
-#define BW_SPI_TCR_SPI_TCNT(x, v) (HW_SPI_TCR_WR(x, (HW_SPI_TCR_RD(x) & ~BM_SPI_TCR_SPI_TCNT) | BF_SPI_TCR_SPI_TCNT(v)))
-/*@}*/
-
-/*******************************************************************************
- * HW_SPI_CTARn - Clock and Transfer Attributes Register (In Master Mode)
- ******************************************************************************/
-
-/*!
- * @brief HW_SPI_CTARn - Clock and Transfer Attributes Register (In Master Mode) (RW)
- *
- * Reset value: 0x78000000U
- *
- * CTAR registers are used to define different transfer attributes. Do not write
- * to the CTAR registers while the module is in the Running state. In Master
- * mode, the CTAR registers define combinations of transfer attributes such as frame
- * size, clock phase and polarity, data bit ordering, baud rate, and various
- * delays. In slave mode, a subset of the bitfields in CTAR0 are used to set the
- * slave transfer attributes. When the module is configured as an SPI master, the
- * CTAS field in the command portion of the TX FIFO entry selects which of the CTAR
- * registers is used. When the module is configured as an SPI bus slave, it uses
- * the CTAR0 register.
- */
-typedef union _hw_spi_ctarn
-{
- uint32_t U;
- struct _hw_spi_ctarn_bitfields
- {
- uint32_t BR : 4; /*!< [3:0] Baud Rate Scaler */
- uint32_t DT : 4; /*!< [7:4] Delay After Transfer Scaler */
- uint32_t ASC : 4; /*!< [11:8] After SCK Delay Scaler */
- uint32_t CSSCK : 4; /*!< [15:12] PCS to SCK Delay Scaler */
- uint32_t PBR : 2; /*!< [17:16] Baud Rate Prescaler */
- uint32_t PDT : 2; /*!< [19:18] Delay after Transfer Prescaler */
- uint32_t PASC : 2; /*!< [21:20] After SCK Delay Prescaler */
- uint32_t PCSSCK : 2; /*!< [23:22] PCS to SCK Delay Prescaler */
- uint32_t LSBFE : 1; /*!< [24] LSB First */
- uint32_t CPHA : 1; /*!< [25] Clock Phase */
- uint32_t CPOL : 1; /*!< [26] Clock Polarity */
- uint32_t FMSZ : 4; /*!< [30:27] Frame Size */
- uint32_t DBR : 1; /*!< [31] Double Baud Rate */
- } B;
-} hw_spi_ctarn_t;
-
-/*!
- * @name Constants and macros for entire SPI_CTARn register
- */
-/*@{*/
-#define HW_SPI_CTARn_COUNT (2U)
-
-#define HW_SPI_CTARn_ADDR(x, n) ((x) + 0xCU + (0x4U * (n)))
-
-#define HW_SPI_CTARn(x, n) (*(__IO hw_spi_ctarn_t *) HW_SPI_CTARn_ADDR(x, n))
-#define HW_SPI_CTARn_RD(x, n) (HW_SPI_CTARn(x, n).U)
-#define HW_SPI_CTARn_WR(x, n, v) (HW_SPI_CTARn(x, n).U = (v))
-#define HW_SPI_CTARn_SET(x, n, v) (HW_SPI_CTARn_WR(x, n, HW_SPI_CTARn_RD(x, n) | (v)))
-#define HW_SPI_CTARn_CLR(x, n, v) (HW_SPI_CTARn_WR(x, n, HW_SPI_CTARn_RD(x, n) & ~(v)))
-#define HW_SPI_CTARn_TOG(x, n, v) (HW_SPI_CTARn_WR(x, n, HW_SPI_CTARn_RD(x, n) ^ (v)))
-/*@}*/
-
-/*
- * Constants & macros for individual SPI_CTARn bitfields
- */
-
-/*!
- * @name Register SPI_CTARn, field BR[3:0] (RW)
- *
- * Selects the scaler value for the baud rate. This field is used only in master
- * mode. The prescaled protocol clock is divided by the Baud Rate Scaler to
- * generate the frequency of the SCK. The baud rate is computed according to the
- * following equation: SCK baud rate = (fP /PBR) x [(1+DBR)/BR] The following table
- * lists the baud rate scaler values. Baud Rate Scaler CTARn[BR] Baud Rate Scaler
- * Value 0000 2 0001 4 0010 6 0011 8 0100 16 0101 32 0110 64 0111 128 1000 256
- * 1001 512 1010 1024 1011 2048 1100 4096 1101 8192 1110 16384 1111 32768
- */
-/*@{*/
-#define BP_SPI_CTARn_BR (0U) /*!< Bit position for SPI_CTARn_BR. */
-#define BM_SPI_CTARn_BR (0x0000000FU) /*!< Bit mask for SPI_CTARn_BR. */
-#define BS_SPI_CTARn_BR (4U) /*!< Bit field size in bits for SPI_CTARn_BR. */
-
-/*! @brief Read current value of the SPI_CTARn_BR field. */
-#define BR_SPI_CTARn_BR(x, n) (HW_SPI_CTARn(x, n).B.BR)
-
-/*! @brief Format value for bitfield SPI_CTARn_BR. */
-#define BF_SPI_CTARn_BR(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_BR) & BM_SPI_CTARn_BR)
-
-/*! @brief Set the BR field to a new value. */
-#define BW_SPI_CTARn_BR(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_BR) | BF_SPI_CTARn_BR(v)))
-/*@}*/
-
-/*!
- * @name Register SPI_CTARn, field DT[7:4] (RW)
- *
- * Selects the Delay after Transfer Scaler. This field is used only in master
- * mode. The Delay after Transfer is the time between the negation of the PCS
- * signal at the end of a frame and the assertion of PCS at the beginning of the next
- * frame. In the Continuous Serial Communications Clock operation, the DT value
- * is fixed to one SCK clock period, The Delay after Transfer is a multiple of the
- * protocol clock period, and it is computed according to the following
- * equation: tDT = (1/fP ) x PDT x DT See Delay Scaler Encoding table in CTARn[CSSCK] bit
- * field description for scaler values.
- */
-/*@{*/
-#define BP_SPI_CTARn_DT (4U) /*!< Bit position for SPI_CTARn_DT. */
-#define BM_SPI_CTARn_DT (0x000000F0U) /*!< Bit mask for SPI_CTARn_DT. */
-#define BS_SPI_CTARn_DT (4U) /*!< Bit field size in bits for SPI_CTARn_DT. */
-
-/*! @brief Read current value of the SPI_CTARn_DT field. */
-#define BR_SPI_CTARn_DT(x, n) (HW_SPI_CTARn(x, n).B.DT)
-
-/*! @brief Format value for bitfield SPI_CTARn_DT. */
-#define BF_SPI_CTARn_DT(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_DT) & BM_SPI_CTARn_DT)
-
-/*! @brief Set the DT field to a new value. */
-#define BW_SPI_CTARn_DT(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_DT) | BF_SPI_CTARn_DT(v)))
-/*@}*/
-
-/*!
- * @name Register SPI_CTARn, field ASC[11:8] (RW)
- *
- * Selects the scaler value for the After SCK Delay. This field is used only in
- * master mode. The After SCK Delay is the delay between the last edge of SCK and
- * the negation of PCS. The delay is a multiple of the protocol clock period,
- * and it is computed according to the following equation: t ASC = (1/fP) x PASC x
- * ASC See Delay Scaler Encoding table in CTARn[CSSCK] bit field description for
- * scaler values. Refer After SCK Delay (tASC ) for more details.
- */
-/*@{*/
-#define BP_SPI_CTARn_ASC (8U) /*!< Bit position for SPI_CTARn_ASC. */
-#define BM_SPI_CTARn_ASC (0x00000F00U) /*!< Bit mask for SPI_CTARn_ASC. */
-#define BS_SPI_CTARn_ASC (4U) /*!< Bit field size in bits for SPI_CTARn_ASC. */
-
-/*! @brief Read current value of the SPI_CTARn_ASC field. */
-#define BR_SPI_CTARn_ASC(x, n) (HW_SPI_CTARn(x, n).B.ASC)
-
-/*! @brief Format value for bitfield SPI_CTARn_ASC. */
-#define BF_SPI_CTARn_ASC(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_ASC) & BM_SPI_CTARn_ASC)
-
-/*! @brief Set the ASC field to a new value. */
-#define BW_SPI_CTARn_ASC(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_ASC) | BF_SPI_CTARn_ASC(v)))
-/*@}*/
-
-/*!
- * @name Register SPI_CTARn, field CSSCK[15:12] (RW)
- *
- * Selects the scaler value for the PCS to SCK delay. This field is used only in
- * master mode. The PCS to SCK Delay is the delay between the assertion of PCS
- * and the first edge of the SCK. The delay is a multiple of the protocol clock
- * period, and it is computed according to the following equation: t CSC = (1/fP )
- * x PCSSCK x CSSCK. The following table lists the delay scaler values. Delay
- * Scaler Encoding Field Value Delay Scaler Value 0000 2 0001 4 0010 8 0011 16 0100
- * 32 0101 64 0110 128 0111 256 1000 512 1001 1024 1010 2048 1011 4096 1100 8192
- * 1101 16384 1110 32768 1111 65536 Refer PCS to SCK Delay (tCSC ) for more
- * details.
- */
-/*@{*/
-#define BP_SPI_CTARn_CSSCK (12U) /*!< Bit position for SPI_CTARn_CSSCK. */
-#define BM_SPI_CTARn_CSSCK (0x0000F000U) /*!< Bit mask for SPI_CTARn_CSSCK. */
-#define BS_SPI_CTARn_CSSCK (4U) /*!< Bit field size in bits for SPI_CTARn_CSSCK. */
-
-/*! @brief Read current value of the SPI_CTARn_CSSCK field. */
-#define BR_SPI_CTARn_CSSCK(x, n) (HW_SPI_CTARn(x, n).B.CSSCK)
-
-/*! @brief Format value for bitfield SPI_CTARn_CSSCK. */
-#define BF_SPI_CTARn_CSSCK(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_CSSCK) & BM_SPI_CTARn_CSSCK)
-
-/*! @brief Set the CSSCK field to a new value. */
-#define BW_SPI_CTARn_CSSCK(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_CSSCK) | BF_SPI_CTARn_CSSCK(v)))
-/*@}*/
-
-/*!
- * @name Register SPI_CTARn, field PBR[17:16] (RW)
- *
- * Selects the prescaler value for the baud rate. This field is used only in
- * master mode. The baud rate is the frequency of the SCK. The protocol clock is
- * divided by the prescaler value before the baud rate selection takes place. See
- * the BR field description for details on how to compute the baud rate.
- *
- * Values:
- * - 00 - Baud Rate Prescaler value is 2.
- * - 01 - Baud Rate Prescaler value is 3.
- * - 10 - Baud Rate Prescaler value is 5.
- * - 11 - Baud Rate Prescaler value is 7.
- */
-/*@{*/
-#define BP_SPI_CTARn_PBR (16U) /*!< Bit position for SPI_CTARn_PBR. */
-#define BM_SPI_CTARn_PBR (0x00030000U) /*!< Bit mask for SPI_CTARn_PBR. */
-#define BS_SPI_CTARn_PBR (2U) /*!< Bit field size in bits for SPI_CTARn_PBR. */
-
-/*! @brief Read current value of the SPI_CTARn_PBR field. */
-#define BR_SPI_CTARn_PBR(x, n) (HW_SPI_CTARn(x, n).B.PBR)
-
-/*! @brief Format value for bitfield SPI_CTARn_PBR. */
-#define BF_SPI_CTARn_PBR(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_PBR) & BM_SPI_CTARn_PBR)
-
-/*! @brief Set the PBR field to a new value. */
-#define BW_SPI_CTARn_PBR(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_PBR) | BF_SPI_CTARn_PBR(v)))
-/*@}*/
-
-/*!
- * @name Register SPI_CTARn, field PDT[19:18] (RW)
- *
- * Selects the prescaler value for the delay between the negation of the PCS
- * signal at the end of a frame and the assertion of PCS at the beginning of the
- * next frame. The PDT field is only used in master mode. See the DT field
- * description for details on how to compute the Delay after Transfer. Refer Delay after
- * Transfer (tDT ) for more details.
- *
- * Values:
- * - 00 - Delay after Transfer Prescaler value is 1.
- * - 01 - Delay after Transfer Prescaler value is 3.
- * - 10 - Delay after Transfer Prescaler value is 5.
- * - 11 - Delay after Transfer Prescaler value is 7.
- */
-/*@{*/
-#define BP_SPI_CTARn_PDT (18U) /*!< Bit position for SPI_CTARn_PDT. */
-#define BM_SPI_CTARn_PDT (0x000C0000U) /*!< Bit mask for SPI_CTARn_PDT. */
-#define BS_SPI_CTARn_PDT (2U) /*!< Bit field size in bits for SPI_CTARn_PDT. */
-
-/*! @brief Read current value of the SPI_CTARn_PDT field. */
-#define BR_SPI_CTARn_PDT(x, n) (HW_SPI_CTARn(x, n).B.PDT)
-
-/*! @brief Format value for bitfield SPI_CTARn_PDT. */
-#define BF_SPI_CTARn_PDT(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_PDT) & BM_SPI_CTARn_PDT)
-
-/*! @brief Set the PDT field to a new value. */
-#define BW_SPI_CTARn_PDT(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_PDT) | BF_SPI_CTARn_PDT(v)))
-/*@}*/
-
-/*!
- * @name Register SPI_CTARn, field PASC[21:20] (RW)
- *
- * Selects the prescaler value for the delay between the last edge of SCK and
- * the negation of PCS. See the ASC field description for information on how to
- * compute the After SCK Delay. Refer After SCK Delay (tASC ) for more details.
- *
- * Values:
- * - 00 - Delay after Transfer Prescaler value is 1.
- * - 01 - Delay after Transfer Prescaler value is 3.
- * - 10 - Delay after Transfer Prescaler value is 5.
- * - 11 - Delay after Transfer Prescaler value is 7.
- */
-/*@{*/
-#define BP_SPI_CTARn_PASC (20U) /*!< Bit position for SPI_CTARn_PASC. */
-#define BM_SPI_CTARn_PASC (0x00300000U) /*!< Bit mask for SPI_CTARn_PASC. */
-#define BS_SPI_CTARn_PASC (2U) /*!< Bit field size in bits for SPI_CTARn_PASC. */
-
-/*! @brief Read current value of the SPI_CTARn_PASC field. */
-#define BR_SPI_CTARn_PASC(x, n) (HW_SPI_CTARn(x, n).B.PASC)
-
-/*! @brief Format value for bitfield SPI_CTARn_PASC. */
-#define BF_SPI_CTARn_PASC(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_PASC) & BM_SPI_CTARn_PASC)
-
-/*! @brief Set the PASC field to a new value. */
-#define BW_SPI_CTARn_PASC(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_PASC) | BF_SPI_CTARn_PASC(v)))
-/*@}*/
-
-/*!
- * @name Register SPI_CTARn, field PCSSCK[23:22] (RW)
- *
- * Selects the prescaler value for the delay between assertion of PCS and the
- * first edge of the SCK. See the CSSCK field description for information on how to
- * compute the PCS to SCK Delay. Refer PCS to SCK Delay (tCSC ) for more details.
- *
- * Values:
- * - 00 - PCS to SCK Prescaler value is 1.
- * - 01 - PCS to SCK Prescaler value is 3.
- * - 10 - PCS to SCK Prescaler value is 5.
- * - 11 - PCS to SCK Prescaler value is 7.
- */
-/*@{*/
-#define BP_SPI_CTARn_PCSSCK (22U) /*!< Bit position for SPI_CTARn_PCSSCK. */
-#define BM_SPI_CTARn_PCSSCK (0x00C00000U) /*!< Bit mask for SPI_CTARn_PCSSCK. */
-#define BS_SPI_CTARn_PCSSCK (2U) /*!< Bit field size in bits for SPI_CTARn_PCSSCK. */
-
-/*! @brief Read current value of the SPI_CTARn_PCSSCK field. */
-#define BR_SPI_CTARn_PCSSCK(x, n) (HW_SPI_CTARn(x, n).B.PCSSCK)
-
-/*! @brief Format value for bitfield SPI_CTARn_PCSSCK. */
-#define BF_SPI_CTARn_PCSSCK(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_PCSSCK) & BM_SPI_CTARn_PCSSCK)
-
-/*! @brief Set the PCSSCK field to a new value. */
-#define BW_SPI_CTARn_PCSSCK(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_PCSSCK) | BF_SPI_CTARn_PCSSCK(v)))
-/*@}*/
-
-/*!
- * @name Register SPI_CTARn, field LSBFE[24] (RW)
- *
- * Specifies whether the LSB or MSB of the frame is transferred first.
- *
- * Values:
- * - 0 - Data is transferred MSB first.
- * - 1 - Data is transferred LSB first.
- */
-/*@{*/
-#define BP_SPI_CTARn_LSBFE (24U) /*!< Bit position for SPI_CTARn_LSBFE. */
-#define BM_SPI_CTARn_LSBFE (0x01000000U) /*!< Bit mask for SPI_CTARn_LSBFE. */
-#define BS_SPI_CTARn_LSBFE (1U) /*!< Bit field size in bits for SPI_CTARn_LSBFE. */
-
-/*! @brief Read current value of the SPI_CTARn_LSBFE field. */
-#define BR_SPI_CTARn_LSBFE(x, n) (BITBAND_ACCESS32(HW_SPI_CTARn_ADDR(x, n), BP_SPI_CTARn_LSBFE))
-
-/*! @brief Format value for bitfield SPI_CTARn_LSBFE. */
-#define BF_SPI_CTARn_LSBFE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_LSBFE) & BM_SPI_CTARn_LSBFE)
-
-/*! @brief Set the LSBFE field to a new value. */
-#define BW_SPI_CTARn_LSBFE(x, n, v) (BITBAND_ACCESS32(HW_SPI_CTARn_ADDR(x, n), BP_SPI_CTARn_LSBFE) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_CTARn, field CPHA[25] (RW)
- *
- * Selects which edge of SCK causes data to change and which edge causes data to
- * be captured. This bit is used in both master and slave mode. For successful
- * communication between serial devices, the devices must have identical clock
- * phase settings. In Continuous SCK mode, the bit value is ignored and the
- * transfers are done as if the CPHA bit is set to 1.
- *
- * Values:
- * - 0 - Data is captured on the leading edge of SCK and changed on the
- * following edge.
- * - 1 - Data is changed on the leading edge of SCK and captured on the
- * following edge.
- */
-/*@{*/
-#define BP_SPI_CTARn_CPHA (25U) /*!< Bit position for SPI_CTARn_CPHA. */
-#define BM_SPI_CTARn_CPHA (0x02000000U) /*!< Bit mask for SPI_CTARn_CPHA. */
-#define BS_SPI_CTARn_CPHA (1U) /*!< Bit field size in bits for SPI_CTARn_CPHA. */
-
-/*! @brief Read current value of the SPI_CTARn_CPHA field. */
-#define BR_SPI_CTARn_CPHA(x, n) (BITBAND_ACCESS32(HW_SPI_CTARn_ADDR(x, n), BP_SPI_CTARn_CPHA))
-
-/*! @brief Format value for bitfield SPI_CTARn_CPHA. */
-#define BF_SPI_CTARn_CPHA(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_CPHA) & BM_SPI_CTARn_CPHA)
-
-/*! @brief Set the CPHA field to a new value. */
-#define BW_SPI_CTARn_CPHA(x, n, v) (BITBAND_ACCESS32(HW_SPI_CTARn_ADDR(x, n), BP_SPI_CTARn_CPHA) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_CTARn, field CPOL[26] (RW)
- *
- * Selects the inactive state of the Serial Communications Clock (SCK). This bit
- * is used in both master and slave mode. For successful communication between
- * serial devices, the devices must have identical clock polarities. When the
- * Continuous Selection Format is selected, switching between clock polarities
- * without stopping the module can cause errors in the transfer due to the peripheral
- * device interpreting the switch of clock polarity as a valid clock edge. In case
- * of continous sck mode, when the module goes in low power mode(disabled),
- * inactive state of sck is not guaranted.
- *
- * Values:
- * - 0 - The inactive state value of SCK is low.
- * - 1 - The inactive state value of SCK is high.
- */
-/*@{*/
-#define BP_SPI_CTARn_CPOL (26U) /*!< Bit position for SPI_CTARn_CPOL. */
-#define BM_SPI_CTARn_CPOL (0x04000000U) /*!< Bit mask for SPI_CTARn_CPOL. */
-#define BS_SPI_CTARn_CPOL (1U) /*!< Bit field size in bits for SPI_CTARn_CPOL. */
-
-/*! @brief Read current value of the SPI_CTARn_CPOL field. */
-#define BR_SPI_CTARn_CPOL(x, n) (BITBAND_ACCESS32(HW_SPI_CTARn_ADDR(x, n), BP_SPI_CTARn_CPOL))
-
-/*! @brief Format value for bitfield SPI_CTARn_CPOL. */
-#define BF_SPI_CTARn_CPOL(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_CPOL) & BM_SPI_CTARn_CPOL)
-
-/*! @brief Set the CPOL field to a new value. */
-#define BW_SPI_CTARn_CPOL(x, n, v) (BITBAND_ACCESS32(HW_SPI_CTARn_ADDR(x, n), BP_SPI_CTARn_CPOL) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_CTARn, field FMSZ[30:27] (RW)
- *
- * The number of bits transferred per frame is equal to the FMSZ value plus 1.
- * Regardless of the transmission mode, the minimum valid frame size value is 4.
- */
-/*@{*/
-#define BP_SPI_CTARn_FMSZ (27U) /*!< Bit position for SPI_CTARn_FMSZ. */
-#define BM_SPI_CTARn_FMSZ (0x78000000U) /*!< Bit mask for SPI_CTARn_FMSZ. */
-#define BS_SPI_CTARn_FMSZ (4U) /*!< Bit field size in bits for SPI_CTARn_FMSZ. */
-
-/*! @brief Read current value of the SPI_CTARn_FMSZ field. */
-#define BR_SPI_CTARn_FMSZ(x, n) (HW_SPI_CTARn(x, n).B.FMSZ)
-
-/*! @brief Format value for bitfield SPI_CTARn_FMSZ. */
-#define BF_SPI_CTARn_FMSZ(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_FMSZ) & BM_SPI_CTARn_FMSZ)
-
-/*! @brief Set the FMSZ field to a new value. */
-#define BW_SPI_CTARn_FMSZ(x, n, v) (HW_SPI_CTARn_WR(x, n, (HW_SPI_CTARn_RD(x, n) & ~BM_SPI_CTARn_FMSZ) | BF_SPI_CTARn_FMSZ(v)))
-/*@}*/
-
-/*!
- * @name Register SPI_CTARn, field DBR[31] (RW)
- *
- * Doubles the effective baud rate of the Serial Communications Clock (SCK).
- * This field is used only in master mode. It effectively halves the Baud Rate
- * division ratio, supporting faster frequencies, and odd division ratios for the
- * Serial Communications Clock (SCK). When the DBR bit is set, the duty cycle of the
- * Serial Communications Clock (SCK) depends on the value in the Baud Rate
- * Prescaler and the Clock Phase bit as listed in the following table. See the BR field
- * description for details on how to compute the baud rate. SPI SCK Duty Cycle
- * DBR CPHA PBR SCK Duty Cycle 0 any any 50/50 1 0 00 50/50 1 0 01 33/66 1 0 10
- * 40/60 1 0 11 43/57 1 1 00 50/50 1 1 01 66/33 1 1 10 60/40 1 1 11 57/43
- *
- * Values:
- * - 0 - The baud rate is computed normally with a 50/50 duty cycle.
- * - 1 - The baud rate is doubled with the duty cycle depending on the Baud Rate
- * Prescaler.
- */
-/*@{*/
-#define BP_SPI_CTARn_DBR (31U) /*!< Bit position for SPI_CTARn_DBR. */
-#define BM_SPI_CTARn_DBR (0x80000000U) /*!< Bit mask for SPI_CTARn_DBR. */
-#define BS_SPI_CTARn_DBR (1U) /*!< Bit field size in bits for SPI_CTARn_DBR. */
-
-/*! @brief Read current value of the SPI_CTARn_DBR field. */
-#define BR_SPI_CTARn_DBR(x, n) (BITBAND_ACCESS32(HW_SPI_CTARn_ADDR(x, n), BP_SPI_CTARn_DBR))
-
-/*! @brief Format value for bitfield SPI_CTARn_DBR. */
-#define BF_SPI_CTARn_DBR(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_DBR) & BM_SPI_CTARn_DBR)
-
-/*! @brief Set the DBR field to a new value. */
-#define BW_SPI_CTARn_DBR(x, n, v) (BITBAND_ACCESS32(HW_SPI_CTARn_ADDR(x, n), BP_SPI_CTARn_DBR) = (v))
-/*@}*/
-/*******************************************************************************
- * HW_SPI_CTARn_SLAVE - Clock and Transfer Attributes Register (In Slave Mode)
- ******************************************************************************/
-
-/*!
- * @brief HW_SPI_CTARn_SLAVE - Clock and Transfer Attributes Register (In Slave Mode) (RW)
- *
- * Reset value: 0x78000000U
- *
- * When the module is configured as an SPI bus slave, the CTAR0 register is used.
- */
-typedef union _hw_spi_ctarn_slave
-{
- uint32_t U;
- struct _hw_spi_ctarn_slave_bitfields
- {
- uint32_t RESERVED0 : 25; /*!< [24:0] */
- uint32_t CPHA : 1; /*!< [25] Clock Phase */
- uint32_t CPOL : 1; /*!< [26] Clock Polarity */
- uint32_t FMSZ : 5; /*!< [31:27] Frame Size */
- } B;
-} hw_spi_ctarn_slave_t;
-
-/*!
- * @name Constants and macros for entire SPI_CTARn_SLAVE register
- */
-/*@{*/
-#define HW_SPI_CTARn_SLAVE_COUNT (1U)
-
-#define HW_SPI_CTARn_SLAVE_ADDR(x, n) ((x) + 0xCU + (0x4U * (n)))
-
-#define HW_SPI_CTARn_SLAVE(x, n) (*(__IO hw_spi_ctarn_slave_t *) HW_SPI_CTARn_SLAVE_ADDR(x, n))
-#define HW_SPI_CTARn_SLAVE_RD(x, n) (HW_SPI_CTARn_SLAVE(x, n).U)
-#define HW_SPI_CTARn_SLAVE_WR(x, n, v) (HW_SPI_CTARn_SLAVE(x, n).U = (v))
-#define HW_SPI_CTARn_SLAVE_SET(x, n, v) (HW_SPI_CTARn_SLAVE_WR(x, n, HW_SPI_CTARn_SLAVE_RD(x, n) | (v)))
-#define HW_SPI_CTARn_SLAVE_CLR(x, n, v) (HW_SPI_CTARn_SLAVE_WR(x, n, HW_SPI_CTARn_SLAVE_RD(x, n) & ~(v)))
-#define HW_SPI_CTARn_SLAVE_TOG(x, n, v) (HW_SPI_CTARn_SLAVE_WR(x, n, HW_SPI_CTARn_SLAVE_RD(x, n) ^ (v)))
-/*@}*/
-
-/*
- * Constants & macros for individual SPI_CTARn_SLAVE bitfields
- */
-
-/*!
- * @name Register SPI_CTARn_SLAVE, field CPHA[25] (RW)
- *
- * Selects which edge of SCK causes data to change and which edge causes data to
- * be captured. This bit is used in both master and slave mode. For successful
- * communication between serial devices, the devices must have identical clock
- * phase settings. In Continuous SCK mode, the bit value is ignored and the
- * transfers are done as if the CPHA bit is set to 1.
- *
- * Values:
- * - 0 - Data is captured on the leading edge of SCK and changed on the
- * following edge.
- * - 1 - Data is changed on the leading edge of SCK and captured on the
- * following edge.
- */
-/*@{*/
-#define BP_SPI_CTARn_SLAVE_CPHA (25U) /*!< Bit position for SPI_CTARn_SLAVE_CPHA. */
-#define BM_SPI_CTARn_SLAVE_CPHA (0x02000000U) /*!< Bit mask for SPI_CTARn_SLAVE_CPHA. */
-#define BS_SPI_CTARn_SLAVE_CPHA (1U) /*!< Bit field size in bits for SPI_CTARn_SLAVE_CPHA. */
-
-/*! @brief Read current value of the SPI_CTARn_SLAVE_CPHA field. */
-#define BR_SPI_CTARn_SLAVE_CPHA(x, n) (BITBAND_ACCESS32(HW_SPI_CTARn_SLAVE_ADDR(x, n), BP_SPI_CTARn_SLAVE_CPHA))
-
-/*! @brief Format value for bitfield SPI_CTARn_SLAVE_CPHA. */
-#define BF_SPI_CTARn_SLAVE_CPHA(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_SLAVE_CPHA) & BM_SPI_CTARn_SLAVE_CPHA)
-
-/*! @brief Set the CPHA field to a new value. */
-#define BW_SPI_CTARn_SLAVE_CPHA(x, n, v) (BITBAND_ACCESS32(HW_SPI_CTARn_SLAVE_ADDR(x, n), BP_SPI_CTARn_SLAVE_CPHA) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_CTARn_SLAVE, field CPOL[26] (RW)
- *
- * Selects the inactive state of the Serial Communications Clock (SCK). In case
- * of continous sck mode, when the module goes in low power mode(disabled),
- * inactive state of sck is not guaranted.
- *
- * Values:
- * - 0 - The inactive state value of SCK is low.
- * - 1 - The inactive state value of SCK is high.
- */
-/*@{*/
-#define BP_SPI_CTARn_SLAVE_CPOL (26U) /*!< Bit position for SPI_CTARn_SLAVE_CPOL. */
-#define BM_SPI_CTARn_SLAVE_CPOL (0x04000000U) /*!< Bit mask for SPI_CTARn_SLAVE_CPOL. */
-#define BS_SPI_CTARn_SLAVE_CPOL (1U) /*!< Bit field size in bits for SPI_CTARn_SLAVE_CPOL. */
-
-/*! @brief Read current value of the SPI_CTARn_SLAVE_CPOL field. */
-#define BR_SPI_CTARn_SLAVE_CPOL(x, n) (BITBAND_ACCESS32(HW_SPI_CTARn_SLAVE_ADDR(x, n), BP_SPI_CTARn_SLAVE_CPOL))
-
-/*! @brief Format value for bitfield SPI_CTARn_SLAVE_CPOL. */
-#define BF_SPI_CTARn_SLAVE_CPOL(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_SLAVE_CPOL) & BM_SPI_CTARn_SLAVE_CPOL)
-
-/*! @brief Set the CPOL field to a new value. */
-#define BW_SPI_CTARn_SLAVE_CPOL(x, n, v) (BITBAND_ACCESS32(HW_SPI_CTARn_SLAVE_ADDR(x, n), BP_SPI_CTARn_SLAVE_CPOL) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_CTARn_SLAVE, field FMSZ[31:27] (RW)
- *
- * The number of bits transfered per frame is equal to the FMSZ field value plus
- * 1. Note that the minimum valid value of frame size is 4.
- */
-/*@{*/
-#define BP_SPI_CTARn_SLAVE_FMSZ (27U) /*!< Bit position for SPI_CTARn_SLAVE_FMSZ. */
-#define BM_SPI_CTARn_SLAVE_FMSZ (0xF8000000U) /*!< Bit mask for SPI_CTARn_SLAVE_FMSZ. */
-#define BS_SPI_CTARn_SLAVE_FMSZ (5U) /*!< Bit field size in bits for SPI_CTARn_SLAVE_FMSZ. */
-
-/*! @brief Read current value of the SPI_CTARn_SLAVE_FMSZ field. */
-#define BR_SPI_CTARn_SLAVE_FMSZ(x, n) (HW_SPI_CTARn_SLAVE(x, n).B.FMSZ)
-
-/*! @brief Format value for bitfield SPI_CTARn_SLAVE_FMSZ. */
-#define BF_SPI_CTARn_SLAVE_FMSZ(v) ((uint32_t)((uint32_t)(v) << BP_SPI_CTARn_SLAVE_FMSZ) & BM_SPI_CTARn_SLAVE_FMSZ)
-
-/*! @brief Set the FMSZ field to a new value. */
-#define BW_SPI_CTARn_SLAVE_FMSZ(x, n, v) (HW_SPI_CTARn_SLAVE_WR(x, n, (HW_SPI_CTARn_SLAVE_RD(x, n) & ~BM_SPI_CTARn_SLAVE_FMSZ) | BF_SPI_CTARn_SLAVE_FMSZ(v)))
-/*@}*/
-
-/*******************************************************************************
- * HW_SPI_SR - Status Register
- ******************************************************************************/
-
-/*!
- * @brief HW_SPI_SR - Status Register (RW)
- *
- * Reset value: 0x02000000U
- *
- * SR contains status and flag bits. The bits reflect the status of the module
- * and indicate the occurrence of events that can generate interrupt or DMA
- * requests. Software can clear flag bits in the SR by writing a 1 to them. Writing a 0
- * to a flag bit has no effect. This register may not be writable in Module
- * Disable mode due to the use of power saving mechanisms.
- */
-typedef union _hw_spi_sr
-{
- uint32_t U;
- struct _hw_spi_sr_bitfields
- {
- uint32_t POPNXTPTR : 4; /*!< [3:0] Pop Next Pointer */
- uint32_t RXCTR : 4; /*!< [7:4] RX FIFO Counter */
- uint32_t TXNXTPTR : 4; /*!< [11:8] Transmit Next Pointer */
- uint32_t TXCTR : 4; /*!< [15:12] TX FIFO Counter */
- uint32_t RESERVED0 : 1; /*!< [16] */
- uint32_t RFDF : 1; /*!< [17] Receive FIFO Drain Flag */
- uint32_t RESERVED1 : 1; /*!< [18] */
- uint32_t RFOF : 1; /*!< [19] Receive FIFO Overflow Flag */
- uint32_t RESERVED2 : 5; /*!< [24:20] */
- uint32_t TFFF : 1; /*!< [25] Transmit FIFO Fill Flag */
- uint32_t RESERVED3 : 1; /*!< [26] */
- uint32_t TFUF : 1; /*!< [27] Transmit FIFO Underflow Flag */
- uint32_t EOQF : 1; /*!< [28] End of Queue Flag */
- uint32_t RESERVED4 : 1; /*!< [29] */
- uint32_t TXRXS : 1; /*!< [30] TX and RX Status */
- uint32_t TCF : 1; /*!< [31] Transfer Complete Flag */
- } B;
-} hw_spi_sr_t;
-
-/*!
- * @name Constants and macros for entire SPI_SR register
- */
-/*@{*/
-#define HW_SPI_SR_ADDR(x) ((x) + 0x2CU)
-
-#define HW_SPI_SR(x) (*(__IO hw_spi_sr_t *) HW_SPI_SR_ADDR(x))
-#define HW_SPI_SR_RD(x) (HW_SPI_SR(x).U)
-#define HW_SPI_SR_WR(x, v) (HW_SPI_SR(x).U = (v))
-#define HW_SPI_SR_SET(x, v) (HW_SPI_SR_WR(x, HW_SPI_SR_RD(x) | (v)))
-#define HW_SPI_SR_CLR(x, v) (HW_SPI_SR_WR(x, HW_SPI_SR_RD(x) & ~(v)))
-#define HW_SPI_SR_TOG(x, v) (HW_SPI_SR_WR(x, HW_SPI_SR_RD(x) ^ (v)))
-/*@}*/
-
-/*
- * Constants & macros for individual SPI_SR bitfields
- */
-
-/*!
- * @name Register SPI_SR, field POPNXTPTR[3:0] (RO)
- *
- * Contains a pointer to the RX FIFO entry to be returned when the POPR is read.
- * The POPNXTPTR is updated when the POPR is read.
- */
-/*@{*/
-#define BP_SPI_SR_POPNXTPTR (0U) /*!< Bit position for SPI_SR_POPNXTPTR. */
-#define BM_SPI_SR_POPNXTPTR (0x0000000FU) /*!< Bit mask for SPI_SR_POPNXTPTR. */
-#define BS_SPI_SR_POPNXTPTR (4U) /*!< Bit field size in bits for SPI_SR_POPNXTPTR. */
-
-/*! @brief Read current value of the SPI_SR_POPNXTPTR field. */
-#define BR_SPI_SR_POPNXTPTR(x) (HW_SPI_SR(x).B.POPNXTPTR)
-/*@}*/
-
-/*!
- * @name Register SPI_SR, field RXCTR[7:4] (RO)
- *
- * Indicates the number of entries in the RX FIFO. The RXCTR is decremented
- * every time the POPR is read. The RXCTR is incremented every time data is
- * transferred from the shift register to the RX FIFO.
- */
-/*@{*/
-#define BP_SPI_SR_RXCTR (4U) /*!< Bit position for SPI_SR_RXCTR. */
-#define BM_SPI_SR_RXCTR (0x000000F0U) /*!< Bit mask for SPI_SR_RXCTR. */
-#define BS_SPI_SR_RXCTR (4U) /*!< Bit field size in bits for SPI_SR_RXCTR. */
-
-/*! @brief Read current value of the SPI_SR_RXCTR field. */
-#define BR_SPI_SR_RXCTR(x) (HW_SPI_SR(x).B.RXCTR)
-/*@}*/
-
-/*!
- * @name Register SPI_SR, field TXNXTPTR[11:8] (RO)
- *
- * Indicates which TX FIFO entry is transmitted during the next transfer. The
- * TXNXTPTR field is updated every time SPI data is transferred from the TX FIFO to
- * the shift register.
- */
-/*@{*/
-#define BP_SPI_SR_TXNXTPTR (8U) /*!< Bit position for SPI_SR_TXNXTPTR. */
-#define BM_SPI_SR_TXNXTPTR (0x00000F00U) /*!< Bit mask for SPI_SR_TXNXTPTR. */
-#define BS_SPI_SR_TXNXTPTR (4U) /*!< Bit field size in bits for SPI_SR_TXNXTPTR. */
-
-/*! @brief Read current value of the SPI_SR_TXNXTPTR field. */
-#define BR_SPI_SR_TXNXTPTR(x) (HW_SPI_SR(x).B.TXNXTPTR)
-/*@}*/
-
-/*!
- * @name Register SPI_SR, field TXCTR[15:12] (RO)
- *
- * Indicates the number of valid entries in the TX FIFO. The TXCTR is
- * incremented every time the PUSHR is written. The TXCTR is decremented every time an SPI
- * command is executed and the SPI data is transferred to the shift register.
- */
-/*@{*/
-#define BP_SPI_SR_TXCTR (12U) /*!< Bit position for SPI_SR_TXCTR. */
-#define BM_SPI_SR_TXCTR (0x0000F000U) /*!< Bit mask for SPI_SR_TXCTR. */
-#define BS_SPI_SR_TXCTR (4U) /*!< Bit field size in bits for SPI_SR_TXCTR. */
-
-/*! @brief Read current value of the SPI_SR_TXCTR field. */
-#define BR_SPI_SR_TXCTR(x) (HW_SPI_SR(x).B.TXCTR)
-/*@}*/
-
-/*!
- * @name Register SPI_SR, field RFDF[17] (W1C)
- *
- * Provides a method for the module to request that entries be removed from the
- * RX FIFO. The bit is set while the RX FIFO is not empty. The RFDF bit can be
- * cleared by writing 1 to it or by acknowledgement from the DMA controller when
- * the RX FIFO is empty.
- *
- * Values:
- * - 0 - RX FIFO is empty.
- * - 1 - RX FIFO is not empty.
- */
-/*@{*/
-#define BP_SPI_SR_RFDF (17U) /*!< Bit position for SPI_SR_RFDF. */
-#define BM_SPI_SR_RFDF (0x00020000U) /*!< Bit mask for SPI_SR_RFDF. */
-#define BS_SPI_SR_RFDF (1U) /*!< Bit field size in bits for SPI_SR_RFDF. */
-
-/*! @brief Read current value of the SPI_SR_RFDF field. */
-#define BR_SPI_SR_RFDF(x) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_RFDF))
-
-/*! @brief Format value for bitfield SPI_SR_RFDF. */
-#define BF_SPI_SR_RFDF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_SR_RFDF) & BM_SPI_SR_RFDF)
-
-/*! @brief Set the RFDF field to a new value. */
-#define BW_SPI_SR_RFDF(x, v) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_RFDF) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_SR, field RFOF[19] (W1C)
- *
- * Indicates an overflow condition in the RX FIFO. The field is set when the RX
- * FIFO and shift register are full and a transfer is initiated. The bit remains
- * set until it is cleared by writing a 1 to it.
- *
- * Values:
- * - 0 - No Rx FIFO overflow.
- * - 1 - Rx FIFO overflow has occurred.
- */
-/*@{*/
-#define BP_SPI_SR_RFOF (19U) /*!< Bit position for SPI_SR_RFOF. */
-#define BM_SPI_SR_RFOF (0x00080000U) /*!< Bit mask for SPI_SR_RFOF. */
-#define BS_SPI_SR_RFOF (1U) /*!< Bit field size in bits for SPI_SR_RFOF. */
-
-/*! @brief Read current value of the SPI_SR_RFOF field. */
-#define BR_SPI_SR_RFOF(x) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_RFOF))
-
-/*! @brief Format value for bitfield SPI_SR_RFOF. */
-#define BF_SPI_SR_RFOF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_SR_RFOF) & BM_SPI_SR_RFOF)
-
-/*! @brief Set the RFOF field to a new value. */
-#define BW_SPI_SR_RFOF(x, v) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_RFOF) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_SR, field TFFF[25] (W1C)
- *
- * Provides a method for the module to request more entries to be added to the
- * TX FIFO. The TFFF bit is set while the TX FIFO is not full. The TFFF bit can be
- * cleared by writing 1 to it or by acknowledgement from the DMA controller to
- * the TX FIFO full request.
- *
- * Values:
- * - 0 - TX FIFO is full.
- * - 1 - TX FIFO is not full.
- */
-/*@{*/
-#define BP_SPI_SR_TFFF (25U) /*!< Bit position for SPI_SR_TFFF. */
-#define BM_SPI_SR_TFFF (0x02000000U) /*!< Bit mask for SPI_SR_TFFF. */
-#define BS_SPI_SR_TFFF (1U) /*!< Bit field size in bits for SPI_SR_TFFF. */
-
-/*! @brief Read current value of the SPI_SR_TFFF field. */
-#define BR_SPI_SR_TFFF(x) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_TFFF))
-
-/*! @brief Format value for bitfield SPI_SR_TFFF. */
-#define BF_SPI_SR_TFFF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_SR_TFFF) & BM_SPI_SR_TFFF)
-
-/*! @brief Set the TFFF field to a new value. */
-#define BW_SPI_SR_TFFF(x, v) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_TFFF) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_SR, field TFUF[27] (W1C)
- *
- * Indicates an underflow condition in the TX FIFO. The transmit underflow
- * condition is detected only for SPI blocks operating in Slave mode and SPI
- * configuration. TFUF is set when the TX FIFO of the module operating in SPI Slave mode
- * is empty and an external SPI master initiates a transfer. The TFUF bit remains
- * set until cleared by writing 1 to it.
- *
- * Values:
- * - 0 - No TX FIFO underflow.
- * - 1 - TX FIFO underflow has occurred.
- */
-/*@{*/
-#define BP_SPI_SR_TFUF (27U) /*!< Bit position for SPI_SR_TFUF. */
-#define BM_SPI_SR_TFUF (0x08000000U) /*!< Bit mask for SPI_SR_TFUF. */
-#define BS_SPI_SR_TFUF (1U) /*!< Bit field size in bits for SPI_SR_TFUF. */
-
-/*! @brief Read current value of the SPI_SR_TFUF field. */
-#define BR_SPI_SR_TFUF(x) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_TFUF))
-
-/*! @brief Format value for bitfield SPI_SR_TFUF. */
-#define BF_SPI_SR_TFUF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_SR_TFUF) & BM_SPI_SR_TFUF)
-
-/*! @brief Set the TFUF field to a new value. */
-#define BW_SPI_SR_TFUF(x, v) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_TFUF) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_SR, field EOQF[28] (W1C)
- *
- * Indicates that the last entry in a queue has been transmitted when the module
- * is in Master mode. The EOQF bit is set when the TX FIFO entry has the EOQ bit
- * set in the command halfword and the end of the transfer is reached. The EOQF
- * bit remains set until cleared by writing a 1 to it. When the EOQF bit is set,
- * the TXRXS bit is automatically cleared.
- *
- * Values:
- * - 0 - EOQ is not set in the executing command.
- * - 1 - EOQ is set in the executing SPI command.
- */
-/*@{*/
-#define BP_SPI_SR_EOQF (28U) /*!< Bit position for SPI_SR_EOQF. */
-#define BM_SPI_SR_EOQF (0x10000000U) /*!< Bit mask for SPI_SR_EOQF. */
-#define BS_SPI_SR_EOQF (1U) /*!< Bit field size in bits for SPI_SR_EOQF. */
-
-/*! @brief Read current value of the SPI_SR_EOQF field. */
-#define BR_SPI_SR_EOQF(x) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_EOQF))
-
-/*! @brief Format value for bitfield SPI_SR_EOQF. */
-#define BF_SPI_SR_EOQF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_SR_EOQF) & BM_SPI_SR_EOQF)
-
-/*! @brief Set the EOQF field to a new value. */
-#define BW_SPI_SR_EOQF(x, v) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_EOQF) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_SR, field TXRXS[30] (W1C)
- *
- * Reflects the run status of the module.
- *
- * Values:
- * - 0 - Transmit and receive operations are disabled (The module is in Stopped
- * state).
- * - 1 - Transmit and receive operations are enabled (The module is in Running
- * state).
- */
-/*@{*/
-#define BP_SPI_SR_TXRXS (30U) /*!< Bit position for SPI_SR_TXRXS. */
-#define BM_SPI_SR_TXRXS (0x40000000U) /*!< Bit mask for SPI_SR_TXRXS. */
-#define BS_SPI_SR_TXRXS (1U) /*!< Bit field size in bits for SPI_SR_TXRXS. */
-
-/*! @brief Read current value of the SPI_SR_TXRXS field. */
-#define BR_SPI_SR_TXRXS(x) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_TXRXS))
-
-/*! @brief Format value for bitfield SPI_SR_TXRXS. */
-#define BF_SPI_SR_TXRXS(v) ((uint32_t)((uint32_t)(v) << BP_SPI_SR_TXRXS) & BM_SPI_SR_TXRXS)
-
-/*! @brief Set the TXRXS field to a new value. */
-#define BW_SPI_SR_TXRXS(x, v) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_TXRXS) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_SR, field TCF[31] (W1C)
- *
- * Indicates that all bits in a frame have been shifted out. TCF remains set
- * until it is cleared by writing a 1 to it.
- *
- * Values:
- * - 0 - Transfer not complete.
- * - 1 - Transfer complete.
- */
-/*@{*/
-#define BP_SPI_SR_TCF (31U) /*!< Bit position for SPI_SR_TCF. */
-#define BM_SPI_SR_TCF (0x80000000U) /*!< Bit mask for SPI_SR_TCF. */
-#define BS_SPI_SR_TCF (1U) /*!< Bit field size in bits for SPI_SR_TCF. */
-
-/*! @brief Read current value of the SPI_SR_TCF field. */
-#define BR_SPI_SR_TCF(x) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_TCF))
-
-/*! @brief Format value for bitfield SPI_SR_TCF. */
-#define BF_SPI_SR_TCF(v) ((uint32_t)((uint32_t)(v) << BP_SPI_SR_TCF) & BM_SPI_SR_TCF)
-
-/*! @brief Set the TCF field to a new value. */
-#define BW_SPI_SR_TCF(x, v) (BITBAND_ACCESS32(HW_SPI_SR_ADDR(x), BP_SPI_SR_TCF) = (v))
-/*@}*/
-
-/*******************************************************************************
- * HW_SPI_RSER - DMA/Interrupt Request Select and Enable Register
- ******************************************************************************/
-
-/*!
- * @brief HW_SPI_RSER - DMA/Interrupt Request Select and Enable Register (RW)
- *
- * Reset value: 0x00000000U
- *
- * RSER controls DMA and interrupt requests. Do not write to the RSER while the
- * module is in the Running state.
- */
-typedef union _hw_spi_rser
-{
- uint32_t U;
- struct _hw_spi_rser_bitfields
- {
- uint32_t RESERVED0 : 16; /*!< [15:0] */
- uint32_t RFDF_DIRS : 1; /*!< [16] Receive FIFO Drain DMA or Interrupt
- * Request Select */
- uint32_t RFDF_RE : 1; /*!< [17] Receive FIFO Drain Request Enable */
- uint32_t RESERVED1 : 1; /*!< [18] */
- uint32_t RFOF_RE : 1; /*!< [19] Receive FIFO Overflow Request Enable
- * */
- uint32_t RESERVED2 : 4; /*!< [23:20] */
- uint32_t TFFF_DIRS : 1; /*!< [24] Transmit FIFO Fill DMA or Interrupt
- * Request Select */
- uint32_t TFFF_RE : 1; /*!< [25] Transmit FIFO Fill Request Enable */
- uint32_t RESERVED3 : 1; /*!< [26] */
- uint32_t TFUF_RE : 1; /*!< [27] Transmit FIFO Underflow Request
- * Enable */
- uint32_t EOQF_RE : 1; /*!< [28] Finished Request Enable */
- uint32_t RESERVED4 : 2; /*!< [30:29] */
- uint32_t TCF_RE : 1; /*!< [31] Transmission Complete Request Enable */
- } B;
-} hw_spi_rser_t;
-
-/*!
- * @name Constants and macros for entire SPI_RSER register
- */
-/*@{*/
-#define HW_SPI_RSER_ADDR(x) ((x) + 0x30U)
-
-#define HW_SPI_RSER(x) (*(__IO hw_spi_rser_t *) HW_SPI_RSER_ADDR(x))
-#define HW_SPI_RSER_RD(x) (HW_SPI_RSER(x).U)
-#define HW_SPI_RSER_WR(x, v) (HW_SPI_RSER(x).U = (v))
-#define HW_SPI_RSER_SET(x, v) (HW_SPI_RSER_WR(x, HW_SPI_RSER_RD(x) | (v)))
-#define HW_SPI_RSER_CLR(x, v) (HW_SPI_RSER_WR(x, HW_SPI_RSER_RD(x) & ~(v)))
-#define HW_SPI_RSER_TOG(x, v) (HW_SPI_RSER_WR(x, HW_SPI_RSER_RD(x) ^ (v)))
-/*@}*/
-
-/*
- * Constants & macros for individual SPI_RSER bitfields
- */
-
-/*!
- * @name Register SPI_RSER, field RFDF_DIRS[16] (RW)
- *
- * Selects between generating a DMA request or an interrupt request. When the
- * RFDF flag bit in the SR is set, and the RFDF_RE bit in the RSER is set, the
- * RFDF_DIRS bit selects between generating an interrupt request or a DMA request.
- *
- * Values:
- * - 0 - Interrupt request.
- * - 1 - DMA request.
- */
-/*@{*/
-#define BP_SPI_RSER_RFDF_DIRS (16U) /*!< Bit position for SPI_RSER_RFDF_DIRS. */
-#define BM_SPI_RSER_RFDF_DIRS (0x00010000U) /*!< Bit mask for SPI_RSER_RFDF_DIRS. */
-#define BS_SPI_RSER_RFDF_DIRS (1U) /*!< Bit field size in bits for SPI_RSER_RFDF_DIRS. */
-
-/*! @brief Read current value of the SPI_RSER_RFDF_DIRS field. */
-#define BR_SPI_RSER_RFDF_DIRS(x) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_RFDF_DIRS))
-
-/*! @brief Format value for bitfield SPI_RSER_RFDF_DIRS. */
-#define BF_SPI_RSER_RFDF_DIRS(v) ((uint32_t)((uint32_t)(v) << BP_SPI_RSER_RFDF_DIRS) & BM_SPI_RSER_RFDF_DIRS)
-
-/*! @brief Set the RFDF_DIRS field to a new value. */
-#define BW_SPI_RSER_RFDF_DIRS(x, v) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_RFDF_DIRS) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_RSER, field RFDF_RE[17] (RW)
- *
- * Enables the RFDF flag in the SR to generate a request. The RFDF_DIRS bit
- * selects between generating an interrupt request or a DMA request.
- *
- * Values:
- * - 0 - RFDF interrupt or DMA requests are disabled.
- * - 1 - RFDF interrupt or DMA requests are enabled.
- */
-/*@{*/
-#define BP_SPI_RSER_RFDF_RE (17U) /*!< Bit position for SPI_RSER_RFDF_RE. */
-#define BM_SPI_RSER_RFDF_RE (0x00020000U) /*!< Bit mask for SPI_RSER_RFDF_RE. */
-#define BS_SPI_RSER_RFDF_RE (1U) /*!< Bit field size in bits for SPI_RSER_RFDF_RE. */
-
-/*! @brief Read current value of the SPI_RSER_RFDF_RE field. */
-#define BR_SPI_RSER_RFDF_RE(x) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_RFDF_RE))
-
-/*! @brief Format value for bitfield SPI_RSER_RFDF_RE. */
-#define BF_SPI_RSER_RFDF_RE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_RSER_RFDF_RE) & BM_SPI_RSER_RFDF_RE)
-
-/*! @brief Set the RFDF_RE field to a new value. */
-#define BW_SPI_RSER_RFDF_RE(x, v) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_RFDF_RE) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_RSER, field RFOF_RE[19] (RW)
- *
- * Enables the RFOF flag in the SR to generate an interrupt request.
- *
- * Values:
- * - 0 - RFOF interrupt requests are disabled.
- * - 1 - RFOF interrupt requests are enabled.
- */
-/*@{*/
-#define BP_SPI_RSER_RFOF_RE (19U) /*!< Bit position for SPI_RSER_RFOF_RE. */
-#define BM_SPI_RSER_RFOF_RE (0x00080000U) /*!< Bit mask for SPI_RSER_RFOF_RE. */
-#define BS_SPI_RSER_RFOF_RE (1U) /*!< Bit field size in bits for SPI_RSER_RFOF_RE. */
-
-/*! @brief Read current value of the SPI_RSER_RFOF_RE field. */
-#define BR_SPI_RSER_RFOF_RE(x) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_RFOF_RE))
-
-/*! @brief Format value for bitfield SPI_RSER_RFOF_RE. */
-#define BF_SPI_RSER_RFOF_RE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_RSER_RFOF_RE) & BM_SPI_RSER_RFOF_RE)
-
-/*! @brief Set the RFOF_RE field to a new value. */
-#define BW_SPI_RSER_RFOF_RE(x, v) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_RFOF_RE) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_RSER, field TFFF_DIRS[24] (RW)
- *
- * Selects between generating a DMA request or an interrupt request. When
- * SR[TFFF] and RSER[TFFF_RE] are set, this field selects between generating an
- * interrupt request or a DMA request.
- *
- * Values:
- * - 0 - TFFF flag generates interrupt requests.
- * - 1 - TFFF flag generates DMA requests.
- */
-/*@{*/
-#define BP_SPI_RSER_TFFF_DIRS (24U) /*!< Bit position for SPI_RSER_TFFF_DIRS. */
-#define BM_SPI_RSER_TFFF_DIRS (0x01000000U) /*!< Bit mask for SPI_RSER_TFFF_DIRS. */
-#define BS_SPI_RSER_TFFF_DIRS (1U) /*!< Bit field size in bits for SPI_RSER_TFFF_DIRS. */
-
-/*! @brief Read current value of the SPI_RSER_TFFF_DIRS field. */
-#define BR_SPI_RSER_TFFF_DIRS(x) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_TFFF_DIRS))
-
-/*! @brief Format value for bitfield SPI_RSER_TFFF_DIRS. */
-#define BF_SPI_RSER_TFFF_DIRS(v) ((uint32_t)((uint32_t)(v) << BP_SPI_RSER_TFFF_DIRS) & BM_SPI_RSER_TFFF_DIRS)
-
-/*! @brief Set the TFFF_DIRS field to a new value. */
-#define BW_SPI_RSER_TFFF_DIRS(x, v) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_TFFF_DIRS) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_RSER, field TFFF_RE[25] (RW)
- *
- * Enables the TFFF flag in the SR to generate a request. The TFFF_DIRS bit
- * selects between generating an interrupt request or a DMA request.
- *
- * Values:
- * - 0 - TFFF interrupts or DMA requests are disabled.
- * - 1 - TFFF interrupts or DMA requests are enabled.
- */
-/*@{*/
-#define BP_SPI_RSER_TFFF_RE (25U) /*!< Bit position for SPI_RSER_TFFF_RE. */
-#define BM_SPI_RSER_TFFF_RE (0x02000000U) /*!< Bit mask for SPI_RSER_TFFF_RE. */
-#define BS_SPI_RSER_TFFF_RE (1U) /*!< Bit field size in bits for SPI_RSER_TFFF_RE. */
-
-/*! @brief Read current value of the SPI_RSER_TFFF_RE field. */
-#define BR_SPI_RSER_TFFF_RE(x) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_TFFF_RE))
-
-/*! @brief Format value for bitfield SPI_RSER_TFFF_RE. */
-#define BF_SPI_RSER_TFFF_RE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_RSER_TFFF_RE) & BM_SPI_RSER_TFFF_RE)
-
-/*! @brief Set the TFFF_RE field to a new value. */
-#define BW_SPI_RSER_TFFF_RE(x, v) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_TFFF_RE) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_RSER, field TFUF_RE[27] (RW)
- *
- * Enables the TFUF flag in the SR to generate an interrupt request.
- *
- * Values:
- * - 0 - TFUF interrupt requests are disabled.
- * - 1 - TFUF interrupt requests are enabled.
- */
-/*@{*/
-#define BP_SPI_RSER_TFUF_RE (27U) /*!< Bit position for SPI_RSER_TFUF_RE. */
-#define BM_SPI_RSER_TFUF_RE (0x08000000U) /*!< Bit mask for SPI_RSER_TFUF_RE. */
-#define BS_SPI_RSER_TFUF_RE (1U) /*!< Bit field size in bits for SPI_RSER_TFUF_RE. */
-
-/*! @brief Read current value of the SPI_RSER_TFUF_RE field. */
-#define BR_SPI_RSER_TFUF_RE(x) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_TFUF_RE))
-
-/*! @brief Format value for bitfield SPI_RSER_TFUF_RE. */
-#define BF_SPI_RSER_TFUF_RE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_RSER_TFUF_RE) & BM_SPI_RSER_TFUF_RE)
-
-/*! @brief Set the TFUF_RE field to a new value. */
-#define BW_SPI_RSER_TFUF_RE(x, v) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_TFUF_RE) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_RSER, field EOQF_RE[28] (RW)
- *
- * Enables the EOQF flag in the SR to generate an interrupt request.
- *
- * Values:
- * - 0 - EOQF interrupt requests are disabled.
- * - 1 - EOQF interrupt requests are enabled.
- */
-/*@{*/
-#define BP_SPI_RSER_EOQF_RE (28U) /*!< Bit position for SPI_RSER_EOQF_RE. */
-#define BM_SPI_RSER_EOQF_RE (0x10000000U) /*!< Bit mask for SPI_RSER_EOQF_RE. */
-#define BS_SPI_RSER_EOQF_RE (1U) /*!< Bit field size in bits for SPI_RSER_EOQF_RE. */
-
-/*! @brief Read current value of the SPI_RSER_EOQF_RE field. */
-#define BR_SPI_RSER_EOQF_RE(x) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_EOQF_RE))
-
-/*! @brief Format value for bitfield SPI_RSER_EOQF_RE. */
-#define BF_SPI_RSER_EOQF_RE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_RSER_EOQF_RE) & BM_SPI_RSER_EOQF_RE)
-
-/*! @brief Set the EOQF_RE field to a new value. */
-#define BW_SPI_RSER_EOQF_RE(x, v) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_EOQF_RE) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_RSER, field TCF_RE[31] (RW)
- *
- * Enables TCF flag in the SR to generate an interrupt request.
- *
- * Values:
- * - 0 - TCF interrupt requests are disabled.
- * - 1 - TCF interrupt requests are enabled.
- */
-/*@{*/
-#define BP_SPI_RSER_TCF_RE (31U) /*!< Bit position for SPI_RSER_TCF_RE. */
-#define BM_SPI_RSER_TCF_RE (0x80000000U) /*!< Bit mask for SPI_RSER_TCF_RE. */
-#define BS_SPI_RSER_TCF_RE (1U) /*!< Bit field size in bits for SPI_RSER_TCF_RE. */
-
-/*! @brief Read current value of the SPI_RSER_TCF_RE field. */
-#define BR_SPI_RSER_TCF_RE(x) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_TCF_RE))
-
-/*! @brief Format value for bitfield SPI_RSER_TCF_RE. */
-#define BF_SPI_RSER_TCF_RE(v) ((uint32_t)((uint32_t)(v) << BP_SPI_RSER_TCF_RE) & BM_SPI_RSER_TCF_RE)
-
-/*! @brief Set the TCF_RE field to a new value. */
-#define BW_SPI_RSER_TCF_RE(x, v) (BITBAND_ACCESS32(HW_SPI_RSER_ADDR(x), BP_SPI_RSER_TCF_RE) = (v))
-/*@}*/
-
-/*******************************************************************************
- * HW_SPI_PUSHR - PUSH TX FIFO Register In Master Mode
- ******************************************************************************/
-
-/*!
- * @brief HW_SPI_PUSHR - PUSH TX FIFO Register In Master Mode (RW)
- *
- * Reset value: 0x00000000U
- *
- * Specifies data to be transferred to the TX FIFO. An 8- or 16-bit write access
- * transfers all 32 bits to the TX FIFO. In Master mode, the register transfers
- * 16 bits of data and 16 bits of command information. In Slave mode, all 32 bits
- * can be used as data, supporting up to 32-bit frame operation. A read access
- * of PUSHR returns the topmost TX FIFO entry. When the module is disabled,
- * writing to this register does not update the FIFO. Therefore, any reads performed
- * while the module is disabled return the last PUSHR write performed while the
- * module was still enabled.
- */
-typedef union _hw_spi_pushr
-{
- uint32_t U;
- struct _hw_spi_pushr_bitfields
- {
- uint32_t TXDATA : 16; /*!< [15:0] Transmit Data */
- uint32_t PCS : 6; /*!< [21:16] */
- uint32_t RESERVED0 : 4; /*!< [25:22] */
- uint32_t CTCNT : 1; /*!< [26] Clear Transfer Counter */
- uint32_t EOQ : 1; /*!< [27] End Of Queue */
- uint32_t CTAS : 3; /*!< [30:28] Clock and Transfer Attributes Select
- * */
- uint32_t CONT : 1; /*!< [31] Continuous Peripheral Chip Select Enable
- * */
- } B;
-} hw_spi_pushr_t;
-
-/*!
- * @name Constants and macros for entire SPI_PUSHR register
- */
-/*@{*/
-#define HW_SPI_PUSHR_ADDR(x) ((x) + 0x34U)
-
-#define HW_SPI_PUSHR(x) (*(__IO hw_spi_pushr_t *) HW_SPI_PUSHR_ADDR(x))
-#define HW_SPI_PUSHR_RD(x) (HW_SPI_PUSHR(x).U)
-#define HW_SPI_PUSHR_WR(x, v) (HW_SPI_PUSHR(x).U = (v))
-#define HW_SPI_PUSHR_SET(x, v) (HW_SPI_PUSHR_WR(x, HW_SPI_PUSHR_RD(x) | (v)))
-#define HW_SPI_PUSHR_CLR(x, v) (HW_SPI_PUSHR_WR(x, HW_SPI_PUSHR_RD(x) & ~(v)))
-#define HW_SPI_PUSHR_TOG(x, v) (HW_SPI_PUSHR_WR(x, HW_SPI_PUSHR_RD(x) ^ (v)))
-/*@}*/
-
-/*
- * Constants & macros for individual SPI_PUSHR bitfields
- */
-
-/*!
- * @name Register SPI_PUSHR, field TXDATA[15:0] (RW)
- *
- * Holds SPI data to be transferred according to the associated SPI command.
- */
-/*@{*/
-#define BP_SPI_PUSHR_TXDATA (0U) /*!< Bit position for SPI_PUSHR_TXDATA. */
-#define BM_SPI_PUSHR_TXDATA (0x0000FFFFU) /*!< Bit mask for SPI_PUSHR_TXDATA. */
-#define BS_SPI_PUSHR_TXDATA (16U) /*!< Bit field size in bits for SPI_PUSHR_TXDATA. */
-
-/*! @brief Read current value of the SPI_PUSHR_TXDATA field. */
-#define BR_SPI_PUSHR_TXDATA(x) (HW_SPI_PUSHR(x).B.TXDATA)
-
-/*! @brief Format value for bitfield SPI_PUSHR_TXDATA. */
-#define BF_SPI_PUSHR_TXDATA(v) ((uint32_t)((uint32_t)(v) << BP_SPI_PUSHR_TXDATA) & BM_SPI_PUSHR_TXDATA)
-
-/*! @brief Set the TXDATA field to a new value. */
-#define BW_SPI_PUSHR_TXDATA(x, v) (HW_SPI_PUSHR_WR(x, (HW_SPI_PUSHR_RD(x) & ~BM_SPI_PUSHR_TXDATA) | BF_SPI_PUSHR_TXDATA(v)))
-/*@}*/
-
-/*!
- * @name Register SPI_PUSHR, field PCS[21:16] (RW)
- *
- * Select which PCS signals are to be asserted for the transfer. Refer to the
- * chip configuration details for the number of PCS signals used in this MCU.
- *
- * Values:
- * - 0 - Negate the PCS[x] signal.
- * - 1 - Assert the PCS[x] signal.
- */
-/*@{*/
-#define BP_SPI_PUSHR_PCS (16U) /*!< Bit position for SPI_PUSHR_PCS. */
-#define BM_SPI_PUSHR_PCS (0x003F0000U) /*!< Bit mask for SPI_PUSHR_PCS. */
-#define BS_SPI_PUSHR_PCS (6U) /*!< Bit field size in bits for SPI_PUSHR_PCS. */
-
-/*! @brief Read current value of the SPI_PUSHR_PCS field. */
-#define BR_SPI_PUSHR_PCS(x) (HW_SPI_PUSHR(x).B.PCS)
-
-/*! @brief Format value for bitfield SPI_PUSHR_PCS. */
-#define BF_SPI_PUSHR_PCS(v) ((uint32_t)((uint32_t)(v) << BP_SPI_PUSHR_PCS) & BM_SPI_PUSHR_PCS)
-
-/*! @brief Set the PCS field to a new value. */
-#define BW_SPI_PUSHR_PCS(x, v) (HW_SPI_PUSHR_WR(x, (HW_SPI_PUSHR_RD(x) & ~BM_SPI_PUSHR_PCS) | BF_SPI_PUSHR_PCS(v)))
-/*@}*/
-
-/*!
- * @name Register SPI_PUSHR, field CTCNT[26] (RW)
- *
- * Clears the TCNT field in the TCR register. The TCNT field is cleared before
- * the module starts transmitting the current SPI frame.
- *
- * Values:
- * - 0 - Do not clear the TCR[TCNT] field.
- * - 1 - Clear the TCR[TCNT] field.
- */
-/*@{*/
-#define BP_SPI_PUSHR_CTCNT (26U) /*!< Bit position for SPI_PUSHR_CTCNT. */
-#define BM_SPI_PUSHR_CTCNT (0x04000000U) /*!< Bit mask for SPI_PUSHR_CTCNT. */
-#define BS_SPI_PUSHR_CTCNT (1U) /*!< Bit field size in bits for SPI_PUSHR_CTCNT. */
-
-/*! @brief Read current value of the SPI_PUSHR_CTCNT field. */
-#define BR_SPI_PUSHR_CTCNT(x) (BITBAND_ACCESS32(HW_SPI_PUSHR_ADDR(x), BP_SPI_PUSHR_CTCNT))
-
-/*! @brief Format value for bitfield SPI_PUSHR_CTCNT. */
-#define BF_SPI_PUSHR_CTCNT(v) ((uint32_t)((uint32_t)(v) << BP_SPI_PUSHR_CTCNT) & BM_SPI_PUSHR_CTCNT)
-
-/*! @brief Set the CTCNT field to a new value. */
-#define BW_SPI_PUSHR_CTCNT(x, v) (BITBAND_ACCESS32(HW_SPI_PUSHR_ADDR(x), BP_SPI_PUSHR_CTCNT) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_PUSHR, field EOQ[27] (RW)
- *
- * Host software uses this bit to signal to the module that the current SPI
- * transfer is the last in a queue. At the end of the transfer, the EOQF bit in the
- * SR is set.
- *
- * Values:
- * - 0 - The SPI data is not the last data to transfer.
- * - 1 - The SPI data is the last data to transfer.
- */
-/*@{*/
-#define BP_SPI_PUSHR_EOQ (27U) /*!< Bit position for SPI_PUSHR_EOQ. */
-#define BM_SPI_PUSHR_EOQ (0x08000000U) /*!< Bit mask for SPI_PUSHR_EOQ. */
-#define BS_SPI_PUSHR_EOQ (1U) /*!< Bit field size in bits for SPI_PUSHR_EOQ. */
-
-/*! @brief Read current value of the SPI_PUSHR_EOQ field. */
-#define BR_SPI_PUSHR_EOQ(x) (BITBAND_ACCESS32(HW_SPI_PUSHR_ADDR(x), BP_SPI_PUSHR_EOQ))
-
-/*! @brief Format value for bitfield SPI_PUSHR_EOQ. */
-#define BF_SPI_PUSHR_EOQ(v) ((uint32_t)((uint32_t)(v) << BP_SPI_PUSHR_EOQ) & BM_SPI_PUSHR_EOQ)
-
-/*! @brief Set the EOQ field to a new value. */
-#define BW_SPI_PUSHR_EOQ(x, v) (BITBAND_ACCESS32(HW_SPI_PUSHR_ADDR(x), BP_SPI_PUSHR_EOQ) = (v))
-/*@}*/
-
-/*!
- * @name Register SPI_PUSHR, field CTAS[30:28] (RW)
- *
- * Selects which CTAR to use in master mode to specify the transfer attributes
- * for the associated SPI frame. In SPI Slave mode, CTAR0 is used. See the chip
- * configuration details to determine how many CTARs this device has. You should
- * not program a value in this field for a register that is not present.
- *
- * Values:
- * - 000 - CTAR0
- * - 001 - CTAR1
- * - 010 - Reserved
- * - 011 - Reserved
- * - 100 - Reserved
- * - 101 - Reserved
- * - 110 - Reserved
- * - 111 - Reserved
- */
-/*@{*/
-#define BP_SPI_PUSHR_CTAS (28U) /*!< Bit position for SPI_PUSHR_CTAS. */
-#define BM_SPI_PUSHR_CTAS (0x70000000U) /*!< Bit mask for SPI_PUSHR_CTAS. */
-#define BS_SPI_PUSHR_CTAS (3U) /*!< Bit field size in bits for SPI_PUSHR_CTAS. */
-
-/*! @brief Read current value of the SPI_PUSHR_CTAS field. */
-#define BR_SPI_PUSHR_CTAS(x) (HW_SPI_PUSHR(x).B.CTAS)
-
-/*! @brief Format value for bitfield SPI_PUSHR_CTAS. */
-#define BF_SPI_PUSHR_CTAS(v) ((uint32_t)((uint32_t)(v) << BP_SPI_PUSHR_CTAS) & BM_SPI_PUSHR_CTAS)
-
-/*! @brief Set the CTAS field to a new value. */
-#define BW_SPI_PUSHR_CTAS(x, v) (HW_SPI_PUSHR_WR(x, (HW_SPI_PUSHR_RD(x) & ~BM_SPI_PUSHR_CTAS) | BF_SPI_PUSHR_CTAS(v)))
-/*@}*/
-
-/*!
- * @name Register SPI_PUSHR, field CONT[31] (RW)
- *
- * Selects a continuous selection format. The bit is used in SPI Master mode.
- * The bit enables the selected PCS signals to remain asserted between transfers.
- *
- * Values:
- * - 0 - Return PCSn signals to their inactive state between transfers.
- * - 1 - Keep PCSn signals asserted between transfers.
- */
-/*@{*/
-#define BP_SPI_PUSHR_CONT (31U) /*!< Bit position for SPI_PUSHR_CONT. */
-#define BM_SPI_PUSHR_CONT (0x80000000U) /*!< Bit mask for SPI_PUSHR_CONT. */
-#define BS_SPI_PUSHR_CONT (1U) /*!< Bit field size in bits for SPI_PUSHR_CONT. */
-
-/*! @brief Read current value of the SPI_PUSHR_CONT field. */
-#define BR_SPI_PUSHR_CONT(x) (BITBAND_ACCESS32(HW_SPI_PUSHR_ADDR(x), BP_SPI_PUSHR_CONT))
-
-/*! @brief Format value for bitfield SPI_PUSHR_CONT. */
-#define BF_SPI_PUSHR_CONT(v) ((uint32_t)((uint32_t)(v) << BP_SPI_PUSHR_CONT) & BM_SPI_PUSHR_CONT)
-
-/*! @brief Set the CONT field to a new value. */
-#define BW_SPI_PUSHR_CONT(x, v) (BITBAND_ACCESS32(HW_SPI_PUSHR_ADDR(x), BP_SPI_PUSHR_CONT) = (v))
-/*@}*/
-/*******************************************************************************
- * HW_SPI_PUSHR_SLAVE - PUSH TX FIFO Register In Slave Mode
- ******************************************************************************/
-
-/*!
- * @brief HW_SPI_PUSHR_SLAVE - PUSH TX FIFO Register In Slave Mode (RW)
- *
- * Reset value: 0x00000000U
- *
- * Specifies data to be transferred to the TX FIFO. An 8- or 16-bit write access
- * to PUSHR transfers all 32 bits to the TX FIFO. In master mode, the register
- * transfers 16 bits of data and 16 bits of command information to the TX FIFO. In
- * slave mode, all 32 register bits can be used as data, supporting up to 32-bit
- * SPI Frame operation.
- */
-typedef union _hw_spi_pushr_slave
-{
- uint32_t U;
- struct _hw_spi_pushr_slave_bitfields
- {
- uint32_t TXDATA : 32; /*!< [31:0] Transmit Data */
- } B;
-} hw_spi_pushr_slave_t;
-
-/*!
- * @name Constants and macros for entire SPI_PUSHR_SLAVE register
- */
-/*@{*/
-#define HW_SPI_PUSHR_SLAVE_ADDR(x) ((x) + 0x34U)
-
-#define HW_SPI_PUSHR_SLAVE(x) (*(__IO hw_spi_pushr_slave_t *) HW_SPI_PUSHR_SLAVE_ADDR(x))
-#define HW_SPI_PUSHR_SLAVE_RD(x) (HW_SPI_PUSHR_SLAVE(x).U)
-#define HW_SPI_PUSHR_SLAVE_WR(x, v) (HW_SPI_PUSHR_SLAVE(x).U = (v))
-#define HW_SPI_PUSHR_SLAVE_SET(x, v) (HW_SPI_PUSHR_SLAVE_WR(x, HW_SPI_PUSHR_SLAVE_RD(x) | (v)))
-#define HW_SPI_PUSHR_SLAVE_CLR(x, v) (HW_SPI_PUSHR_SLAVE_WR(x, HW_SPI_PUSHR_SLAVE_RD(x) & ~(v)))
-#define HW_SPI_PUSHR_SLAVE_TOG(x, v) (HW_SPI_PUSHR_SLAVE_WR(x, HW_SPI_PUSHR_SLAVE_RD(x) ^ (v)))
-/*@}*/
-
-/*
- * Constants & macros for individual SPI_PUSHR_SLAVE bitfields
- */
-
-/*!
- * @name Register SPI_PUSHR_SLAVE, field TXDATA[31:0] (RW)
- *
- * Holds SPI data to be transferred according to the associated SPI command.
- */
-/*@{*/
-#define BP_SPI_PUSHR_SLAVE_TXDATA (0U) /*!< Bit position for SPI_PUSHR_SLAVE_TXDATA. */
-#define BM_SPI_PUSHR_SLAVE_TXDATA (0xFFFFFFFFU) /*!< Bit mask for SPI_PUSHR_SLAVE_TXDATA. */
-#define BS_SPI_PUSHR_SLAVE_TXDATA (32U) /*!< Bit field size in bits for SPI_PUSHR_SLAVE_TXDATA. */
-
-/*! @brief Read current value of the SPI_PUSHR_SLAVE_TXDATA field. */
-#define BR_SPI_PUSHR_SLAVE_TXDATA(x) (HW_SPI_PUSHR_SLAVE(x).U)
-
-/*! @brief Format value for bitfield SPI_PUSHR_SLAVE_TXDATA. */
-#define BF_SPI_PUSHR_SLAVE_TXDATA(v) ((uint32_t)((uint32_t)(v) << BP_SPI_PUSHR_SLAVE_TXDATA) & BM_SPI_PUSHR_SLAVE_TXDATA)
-
-/*! @brief Set the TXDATA field to a new value. */
-#define BW_SPI_PUSHR_SLAVE_TXDATA(x, v) (HW_SPI_PUSHR_SLAVE_WR(x, v))
-/*@}*/
-
-/*******************************************************************************
- * HW_SPI_POPR - POP RX FIFO Register
- ******************************************************************************/
-
-/*!
- * @brief HW_SPI_POPR - POP RX FIFO Register (RO)
- *
- * Reset value: 0x00000000U
- *
- * POPR is used to read the RX FIFO. Eight- or sixteen-bit read accesses to the
- * POPR have the same effect on the RX FIFO as 32-bit read accesses. A write to
- * this register will generate a Transfer Error.
- */
-typedef union _hw_spi_popr
-{
- uint32_t U;
- struct _hw_spi_popr_bitfields
- {
- uint32_t RXDATA : 32; /*!< [31:0] Received Data */
- } B;
-} hw_spi_popr_t;
-
-/*!
- * @name Constants and macros for entire SPI_POPR register
- */
-/*@{*/
-#define HW_SPI_POPR_ADDR(x) ((x) + 0x38U)
-
-#define HW_SPI_POPR(x) (*(__I hw_spi_popr_t *) HW_SPI_POPR_ADDR(x))
-#define HW_SPI_POPR_RD(x) (HW_SPI_POPR(x).U)
-/*@}*/
-
-/*
- * Constants & macros for individual SPI_POPR bitfields
- */
-
-/*!
- * @name Register SPI_POPR, field RXDATA[31:0] (RO)
- *
- * Contains the SPI data from the RX FIFO entry to which the Pop Next Data
- * Pointer points.
- */
-/*@{*/
-#define BP_SPI_POPR_RXDATA (0U) /*!< Bit position for SPI_POPR_RXDATA. */
-#define BM_SPI_POPR_RXDATA (0xFFFFFFFFU) /*!< Bit mask for SPI_POPR_RXDATA. */
-#define BS_SPI_POPR_RXDATA (32U) /*!< Bit field size in bits for SPI_POPR_RXDATA. */
-
-/*! @brief Read current value of the SPI_POPR_RXDATA field. */
-#define BR_SPI_POPR_RXDATA(x) (HW_SPI_POPR(x).U)
-/*@}*/
-
-/*******************************************************************************
- * HW_SPI_TXFRn - Transmit FIFO Registers
- ******************************************************************************/
-
-/*!
- * @brief HW_SPI_TXFRn - Transmit FIFO Registers (RO)
- *
- * Reset value: 0x00000000U
- *
- * TXFRn registers provide visibility into the TX FIFO for debugging purposes.
- * Each register is an entry in the TX FIFO. The registers are read-only and
- * cannot be modified. Reading the TXFRx registers does not alter the state of the TX
- * FIFO.
- */
-typedef union _hw_spi_txfrn
-{
- uint32_t U;
- struct _hw_spi_txfrn_bitfields
- {
- uint32_t TXDATA : 16; /*!< [15:0] Transmit Data */
- uint32_t TXCMD_TXDATA : 16; /*!< [31:16] Transmit Command or Transmit
- * Data */
- } B;
-} hw_spi_txfrn_t;
-
-/*!
- * @name Constants and macros for entire SPI_TXFRn register
- */
-/*@{*/
-#define HW_SPI_TXFRn_COUNT (4U)
-
-#define HW_SPI_TXFRn_ADDR(x, n) ((x) + 0x3CU + (0x4U * (n)))
-
-#define HW_SPI_TXFRn(x, n) (*(__I hw_spi_txfrn_t *) HW_SPI_TXFRn_ADDR(x, n))
-#define HW_SPI_TXFRn_RD(x, n) (HW_SPI_TXFRn(x, n).U)
-/*@}*/
-
-/*
- * Constants & macros for individual SPI_TXFRn bitfields
- */
-
-/*!
- * @name Register SPI_TXFRn, field TXDATA[15:0] (RO)
- *
- * Contains the SPI data to be shifted out.
- */
-/*@{*/
-#define BP_SPI_TXFRn_TXDATA (0U) /*!< Bit position for SPI_TXFRn_TXDATA. */
-#define BM_SPI_TXFRn_TXDATA (0x0000FFFFU) /*!< Bit mask for SPI_TXFRn_TXDATA. */
-#define BS_SPI_TXFRn_TXDATA (16U) /*!< Bit field size in bits for SPI_TXFRn_TXDATA. */
-
-/*! @brief Read current value of the SPI_TXFRn_TXDATA field. */
-#define BR_SPI_TXFRn_TXDATA(x, n) (HW_SPI_TXFRn(x, n).B.TXDATA)
-/*@}*/
-
-/*!
- * @name Register SPI_TXFRn, field TXCMD_TXDATA[31:16] (RO)
- *
- * In Master mode the TXCMD field contains the command that sets the transfer
- * attributes for the SPI data. In Slave mode, the TXDATA contains 16 MSB bits of
- * the SPI data to be shifted out.
- */
-/*@{*/
-#define BP_SPI_TXFRn_TXCMD_TXDATA (16U) /*!< Bit position for SPI_TXFRn_TXCMD_TXDATA. */
-#define BM_SPI_TXFRn_TXCMD_TXDATA (0xFFFF0000U) /*!< Bit mask for SPI_TXFRn_TXCMD_TXDATA. */
-#define BS_SPI_TXFRn_TXCMD_TXDATA (16U) /*!< Bit field size in bits for SPI_TXFRn_TXCMD_TXDATA. */
-
-/*! @brief Read current value of the SPI_TXFRn_TXCMD_TXDATA field. */
-#define BR_SPI_TXFRn_TXCMD_TXDATA(x, n) (HW_SPI_TXFRn(x, n).B.TXCMD_TXDATA)
-/*@}*/
-
-/*******************************************************************************
- * HW_SPI_RXFRn - Receive FIFO Registers
- ******************************************************************************/
-
-/*!
- * @brief HW_SPI_RXFRn - Receive FIFO Registers (RO)
- *
- * Reset value: 0x00000000U
- *
- * RXFRn provide visibility into the RX FIFO for debugging purposes. Each
- * register is an entry in the RX FIFO. The RXFR registers are read-only. Reading the
- * RXFRx registers does not alter the state of the RX FIFO.
- */
-typedef union _hw_spi_rxfrn
-{
- uint32_t U;
- struct _hw_spi_rxfrn_bitfields
- {
- uint32_t RXDATA : 32; /*!< [31:0] Receive Data */
- } B;
-} hw_spi_rxfrn_t;
-
-/*!
- * @name Constants and macros for entire SPI_RXFRn register
- */
-/*@{*/
-#define HW_SPI_RXFRn_COUNT (4U)
-
-#define HW_SPI_RXFRn_ADDR(x, n) ((x) + 0x7CU + (0x4U * (n)))
-
-#define HW_SPI_RXFRn(x, n) (*(__I hw_spi_rxfrn_t *) HW_SPI_RXFRn_ADDR(x, n))
-#define HW_SPI_RXFRn_RD(x, n) (HW_SPI_RXFRn(x, n).U)
-/*@}*/
-
-/*
- * Constants & macros for individual SPI_RXFRn bitfields
- */
-
-/*!
- * @name Register SPI_RXFRn, field RXDATA[31:0] (RO)
- *
- * Contains the received SPI data.
- */
-/*@{*/
-#define BP_SPI_RXFRn_RXDATA (0U) /*!< Bit position for SPI_RXFRn_RXDATA. */
-#define BM_SPI_RXFRn_RXDATA (0xFFFFFFFFU) /*!< Bit mask for SPI_RXFRn_RXDATA. */
-#define BS_SPI_RXFRn_RXDATA (32U) /*!< Bit field size in bits for SPI_RXFRn_RXDATA. */
-
-/*! @brief Read current value of the SPI_RXFRn_RXDATA field. */
-#define BR_SPI_RXFRn_RXDATA(x, n) (HW_SPI_RXFRn(x, n).U)
-/*@}*/
-
-/*
-** Start of section using anonymous unions
-*/
-
-#if defined(__ARMCC_VERSION)
- #pragma push
- #pragma anon_unions
-#elif defined(__CWCC__)
- #pragma push
- #pragma cpp_extensions on
-#elif defined(__GNUC__)
- /* anonymous unions are enabled by default */
-#elif defined(__IAR_SYSTEMS_ICC__)
- #pragma language=extended
-#else
- #error Not supported compiler type
-#endif
-
-/*******************************************************************************
- * hw_spi_t - module struct
- ******************************************************************************/
-/*!
- * @brief All SPI module registers.
- */
-#pragma pack(1)
-typedef struct _hw_spi
-{
- __IO hw_spi_mcr_t MCR; /*!< [0x0] Module Configuration Register */
- uint8_t _reserved0[4];
- __IO hw_spi_tcr_t TCR; /*!< [0x8] Transfer Count Register */
- union {
- __IO hw_spi_ctarn_t CTARn[2]; /*!< [0xC] Clock and Transfer Attributes Register (In Master Mode) */
- __IO hw_spi_ctarn_slave_t CTARn_SLAVE[1]; /*!< [0xC] Clock and Transfer Attributes Register (In Slave Mode) */
- };
- uint8_t _reserved1[24];
- __IO hw_spi_sr_t SR; /*!< [0x2C] Status Register */
- __IO hw_spi_rser_t RSER; /*!< [0x30] DMA/Interrupt Request Select and Enable Register */
- union {
- __IO hw_spi_pushr_t PUSHR; /*!< [0x34] PUSH TX FIFO Register In Master Mode */
- __IO hw_spi_pushr_slave_t PUSHR_SLAVE; /*!< [0x34] PUSH TX FIFO Register In Slave Mode */
- };
- __I hw_spi_popr_t POPR; /*!< [0x38] POP RX FIFO Register */
- __I hw_spi_txfrn_t TXFRn[4]; /*!< [0x3C] Transmit FIFO Registers */
- uint8_t _reserved2[48];
- __I hw_spi_rxfrn_t RXFRn[4]; /*!< [0x7C] Receive FIFO Registers */
-} hw_spi_t;
-#pragma pack()
-
-/*! @brief Macro to access all SPI registers. */
-/*! @param x SPI module instance base address. */
-/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
- * use the '&' operator, like <code>&HW_SPI(SPI0_BASE)</code>. */
-#define HW_SPI(x) (*(hw_spi_t *)(x))
-
-/*
-** End of section using anonymous unions
-*/
-
-#if defined(__ARMCC_VERSION)
- #pragma pop
-#elif defined(__CWCC__)
- #pragma pop
-#elif defined(__GNUC__)
- /* leave anonymous unions enabled */
-#elif defined(__IAR_SYSTEMS_ICC__)
- #pragma language=default
-#else
- #error Not supported compiler type
-#endif
-
-#endif /* __HW_SPI_REGISTERS_H__ */
-/* EOF */
projects / qmk_firmware.git / blobdiff