--- /dev/null
+/*
+** ###################################################################
+** Compilers: Keil ARM C/C++ Compiler
+** Freescale C/C++ for Embedded ARM
+** GNU C Compiler
+** IAR ANSI C/C++ Compiler for ARM
+**
+** Reference manual: K64P144M120SF5RM, Rev.2, January 2014
+** Version: rev. 2.5, 2014-02-10
+** Build: b140604
+**
+** Abstract:
+** Extension to the CMSIS register access layer header.
+**
+** Copyright (c) 2014 Freescale Semiconductor, Inc.
+** All rights reserved.
+**
+** Redistribution and use in source and binary forms, with or without modification,
+** are permitted provided that the following conditions are met:
+**
+** o Redistributions of source code must retain the above copyright notice, this list
+** of conditions and the following disclaimer.
+**
+** o Redistributions in binary form must reproduce the above copyright notice, this
+** list of conditions and the following disclaimer in the documentation and/or
+** other materials provided with the distribution.
+**
+** o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+** contributors may be used to endorse or promote products derived from this
+** software without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+**
+** http: www.freescale.com
+** mail: support@freescale.com
+**
+** Revisions:
+** - rev. 1.0 (2013-08-12)
+** Initial version.
+** - rev. 2.0 (2013-10-29)
+** Register accessor macros added to the memory map.
+** Symbols for Processor Expert memory map compatibility added to the memory map.
+** Startup file for gcc has been updated according to CMSIS 3.2.
+** System initialization updated.
+** MCG - registers updated.
+** PORTA, PORTB, PORTC, PORTE - registers for digital filter removed.
+** - rev. 2.1 (2013-10-30)
+** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled.
+** - rev. 2.2 (2013-12-09)
+** DMA - EARS register removed.
+** AIPS0, AIPS1 - MPRA register updated.
+** - rev. 2.3 (2014-01-24)
+** Update according to reference manual rev. 2
+** ENET, MCG, MCM, SIM, USB - registers updated
+** - rev. 2.4 (2014-02-10)
+** The declaration of clock configurations has been moved to separate header file system_MK64F12.h
+** Update of SystemInit() and SystemCoreClockUpdate() functions.
+** - rev. 2.5 (2014-02-10)
+** The declaration of clock configurations has been moved to separate header file system_MK64F12.h
+** Update of SystemInit() and SystemCoreClockUpdate() functions.
+** Module access macro module_BASES replaced by module_BASE_PTRS.
+**
+** ###################################################################
+*/
+
+/*
+ * WARNING! DO NOT EDIT THIS FILE DIRECTLY!
+ *
+ * This file was generated automatically and any changes may be lost.
+ */
+#ifndef __HW_OSC_REGISTERS_H__
+#define __HW_OSC_REGISTERS_H__
+
+#include "MK64F12.h"
+#include "fsl_bitaccess.h"
+
+/*
+ * MK64F12 OSC
+ *
+ * Oscillator
+ *
+ * Registers defined in this header file:
+ * - HW_OSC_CR - OSC Control Register
+ *
+ * - hw_osc_t - Struct containing all module registers.
+ */
+
+#define HW_OSC_INSTANCE_COUNT (1U) /*!< Number of instances of the OSC module. */
+
+/*******************************************************************************
+ * HW_OSC_CR - OSC Control Register
+ ******************************************************************************/
+
+/*!
+ * @brief HW_OSC_CR - OSC Control Register (RW)
+ *
+ * Reset value: 0x00U
+ *
+ * After OSC is enabled and starts generating the clocks, the configurations
+ * such as low power and frequency range, must not be changed.
+ */
+typedef union _hw_osc_cr
+{
+ uint8_t U;
+ struct _hw_osc_cr_bitfields
+ {
+ uint8_t SC16P : 1; /*!< [0] Oscillator 16 pF Capacitor Load Configure
+ * */
+ uint8_t SC8P : 1; /*!< [1] Oscillator 8 pF Capacitor Load Configure */
+ uint8_t SC4P : 1; /*!< [2] Oscillator 4 pF Capacitor Load Configure */
+ uint8_t SC2P : 1; /*!< [3] Oscillator 2 pF Capacitor Load Configure */
+ uint8_t RESERVED0 : 1; /*!< [4] */
+ uint8_t EREFSTEN : 1; /*!< [5] External Reference Stop Enable */
+ uint8_t RESERVED1 : 1; /*!< [6] */
+ uint8_t ERCLKEN : 1; /*!< [7] External Reference Enable */
+ } B;
+} hw_osc_cr_t;
+
+/*!
+ * @name Constants and macros for entire OSC_CR register
+ */
+/*@{*/
+#define HW_OSC_CR_ADDR(x) ((x) + 0x0U)
+
+#define HW_OSC_CR(x) (*(__IO hw_osc_cr_t *) HW_OSC_CR_ADDR(x))
+#define HW_OSC_CR_RD(x) (HW_OSC_CR(x).U)
+#define HW_OSC_CR_WR(x, v) (HW_OSC_CR(x).U = (v))
+#define HW_OSC_CR_SET(x, v) (HW_OSC_CR_WR(x, HW_OSC_CR_RD(x) | (v)))
+#define HW_OSC_CR_CLR(x, v) (HW_OSC_CR_WR(x, HW_OSC_CR_RD(x) & ~(v)))
+#define HW_OSC_CR_TOG(x, v) (HW_OSC_CR_WR(x, HW_OSC_CR_RD(x) ^ (v)))
+/*@}*/
+
+/*
+ * Constants & macros for individual OSC_CR bitfields
+ */
+
+/*!
+ * @name Register OSC_CR, field SC16P[0] (RW)
+ *
+ * Configures the oscillator load.
+ *
+ * Values:
+ * - 0 - Disable the selection.
+ * - 1 - Add 16 pF capacitor to the oscillator load.
+ */
+/*@{*/
+#define BP_OSC_CR_SC16P (0U) /*!< Bit position for OSC_CR_SC16P. */
+#define BM_OSC_CR_SC16P (0x01U) /*!< Bit mask for OSC_CR_SC16P. */
+#define BS_OSC_CR_SC16P (1U) /*!< Bit field size in bits for OSC_CR_SC16P. */
+
+/*! @brief Read current value of the OSC_CR_SC16P field. */
+#define BR_OSC_CR_SC16P(x) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC16P))
+
+/*! @brief Format value for bitfield OSC_CR_SC16P. */
+#define BF_OSC_CR_SC16P(v) ((uint8_t)((uint8_t)(v) << BP_OSC_CR_SC16P) & BM_OSC_CR_SC16P)
+
+/*! @brief Set the SC16P field to a new value. */
+#define BW_OSC_CR_SC16P(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC16P) = (v))
+/*@}*/
+
+/*!
+ * @name Register OSC_CR, field SC8P[1] (RW)
+ *
+ * Configures the oscillator load.
+ *
+ * Values:
+ * - 0 - Disable the selection.
+ * - 1 - Add 8 pF capacitor to the oscillator load.
+ */
+/*@{*/
+#define BP_OSC_CR_SC8P (1U) /*!< Bit position for OSC_CR_SC8P. */
+#define BM_OSC_CR_SC8P (0x02U) /*!< Bit mask for OSC_CR_SC8P. */
+#define BS_OSC_CR_SC8P (1U) /*!< Bit field size in bits for OSC_CR_SC8P. */
+
+/*! @brief Read current value of the OSC_CR_SC8P field. */
+#define BR_OSC_CR_SC8P(x) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC8P))
+
+/*! @brief Format value for bitfield OSC_CR_SC8P. */
+#define BF_OSC_CR_SC8P(v) ((uint8_t)((uint8_t)(v) << BP_OSC_CR_SC8P) & BM_OSC_CR_SC8P)
+
+/*! @brief Set the SC8P field to a new value. */
+#define BW_OSC_CR_SC8P(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC8P) = (v))
+/*@}*/
+
+/*!
+ * @name Register OSC_CR, field SC4P[2] (RW)
+ *
+ * Configures the oscillator load.
+ *
+ * Values:
+ * - 0 - Disable the selection.
+ * - 1 - Add 4 pF capacitor to the oscillator load.
+ */
+/*@{*/
+#define BP_OSC_CR_SC4P (2U) /*!< Bit position for OSC_CR_SC4P. */
+#define BM_OSC_CR_SC4P (0x04U) /*!< Bit mask for OSC_CR_SC4P. */
+#define BS_OSC_CR_SC4P (1U) /*!< Bit field size in bits for OSC_CR_SC4P. */
+
+/*! @brief Read current value of the OSC_CR_SC4P field. */
+#define BR_OSC_CR_SC4P(x) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC4P))
+
+/*! @brief Format value for bitfield OSC_CR_SC4P. */
+#define BF_OSC_CR_SC4P(v) ((uint8_t)((uint8_t)(v) << BP_OSC_CR_SC4P) & BM_OSC_CR_SC4P)
+
+/*! @brief Set the SC4P field to a new value. */
+#define BW_OSC_CR_SC4P(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC4P) = (v))
+/*@}*/
+
+/*!
+ * @name Register OSC_CR, field SC2P[3] (RW)
+ *
+ * Configures the oscillator load.
+ *
+ * Values:
+ * - 0 - Disable the selection.
+ * - 1 - Add 2 pF capacitor to the oscillator load.
+ */
+/*@{*/
+#define BP_OSC_CR_SC2P (3U) /*!< Bit position for OSC_CR_SC2P. */
+#define BM_OSC_CR_SC2P (0x08U) /*!< Bit mask for OSC_CR_SC2P. */
+#define BS_OSC_CR_SC2P (1U) /*!< Bit field size in bits for OSC_CR_SC2P. */
+
+/*! @brief Read current value of the OSC_CR_SC2P field. */
+#define BR_OSC_CR_SC2P(x) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC2P))
+
+/*! @brief Format value for bitfield OSC_CR_SC2P. */
+#define BF_OSC_CR_SC2P(v) ((uint8_t)((uint8_t)(v) << BP_OSC_CR_SC2P) & BM_OSC_CR_SC2P)
+
+/*! @brief Set the SC2P field to a new value. */
+#define BW_OSC_CR_SC2P(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC2P) = (v))
+/*@}*/
+
+/*!
+ * @name Register OSC_CR, field EREFSTEN[5] (RW)
+ *
+ * Controls whether or not the external reference clock (OSCERCLK) remains
+ * enabled when MCU enters Stop mode.
+ *
+ * Values:
+ * - 0 - External reference clock is disabled in Stop mode.
+ * - 1 - External reference clock stays enabled in Stop mode if ERCLKEN is set
+ * before entering Stop mode.
+ */
+/*@{*/
+#define BP_OSC_CR_EREFSTEN (5U) /*!< Bit position for OSC_CR_EREFSTEN. */
+#define BM_OSC_CR_EREFSTEN (0x20U) /*!< Bit mask for OSC_CR_EREFSTEN. */
+#define BS_OSC_CR_EREFSTEN (1U) /*!< Bit field size in bits for OSC_CR_EREFSTEN. */
+
+/*! @brief Read current value of the OSC_CR_EREFSTEN field. */
+#define BR_OSC_CR_EREFSTEN(x) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_EREFSTEN))
+
+/*! @brief Format value for bitfield OSC_CR_EREFSTEN. */
+#define BF_OSC_CR_EREFSTEN(v) ((uint8_t)((uint8_t)(v) << BP_OSC_CR_EREFSTEN) & BM_OSC_CR_EREFSTEN)
+
+/*! @brief Set the EREFSTEN field to a new value. */
+#define BW_OSC_CR_EREFSTEN(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_EREFSTEN) = (v))
+/*@}*/
+
+/*!
+ * @name Register OSC_CR, field ERCLKEN[7] (RW)
+ *
+ * Enables external reference clock (OSCERCLK).
+ *
+ * Values:
+ * - 0 - External reference clock is inactive.
+ * - 1 - External reference clock is enabled.
+ */
+/*@{*/
+#define BP_OSC_CR_ERCLKEN (7U) /*!< Bit position for OSC_CR_ERCLKEN. */
+#define BM_OSC_CR_ERCLKEN (0x80U) /*!< Bit mask for OSC_CR_ERCLKEN. */
+#define BS_OSC_CR_ERCLKEN (1U) /*!< Bit field size in bits for OSC_CR_ERCLKEN. */
+
+/*! @brief Read current value of the OSC_CR_ERCLKEN field. */
+#define BR_OSC_CR_ERCLKEN(x) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_ERCLKEN))
+
+/*! @brief Format value for bitfield OSC_CR_ERCLKEN. */
+#define BF_OSC_CR_ERCLKEN(v) ((uint8_t)((uint8_t)(v) << BP_OSC_CR_ERCLKEN) & BM_OSC_CR_ERCLKEN)
+
+/*! @brief Set the ERCLKEN field to a new value. */
+#define BW_OSC_CR_ERCLKEN(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_ERCLKEN) = (v))
+/*@}*/
+
+/*******************************************************************************
+ * hw_osc_t - module struct
+ ******************************************************************************/
+/*!
+ * @brief All OSC module registers.
+ */
+#pragma pack(1)
+typedef struct _hw_osc
+{
+ __IO hw_osc_cr_t CR; /*!< [0x0] OSC Control Register */
+} hw_osc_t;
+#pragma pack()
+
+/*! @brief Macro to access all OSC registers. */
+/*! @param x OSC module instance base address. */
+/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
+ * use the '&' operator, like <code>&HW_OSC(OSC_BASE)</code>. */
+#define HW_OSC(x) (*(hw_osc_t *)(x))
+
+#endif /* __HW_OSC_REGISTERS_H__ */
+/* EOF */
projects / qmk_firmware.git / blobdiff