--- /dev/null
+/*
+** ###################################################################
+** Compilers: Keil ARM C/C++ Compiler
+** Freescale C/C++ for Embedded ARM
+** GNU C Compiler
+** IAR ANSI C/C++ Compiler for ARM
+**
+** Reference manual: K64P144M120SF5RM, Rev.2, January 2014
+** Version: rev. 2.5, 2014-02-10
+** Build: b140604
+**
+** Abstract:
+** Extension to the CMSIS register access layer header.
+**
+** Copyright (c) 2014 Freescale Semiconductor, Inc.
+** All rights reserved.
+**
+** Redistribution and use in source and binary forms, with or without modification,
+** are permitted provided that the following conditions are met:
+**
+** o Redistributions of source code must retain the above copyright notice, this list
+** of conditions and the following disclaimer.
+**
+** o Redistributions in binary form must reproduce the above copyright notice, this
+** list of conditions and the following disclaimer in the documentation and/or
+** other materials provided with the distribution.
+**
+** o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+** contributors may be used to endorse or promote products derived from this
+** software without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+** ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+** WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+** (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+** LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+** ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+** SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+**
+** http: www.freescale.com
+** mail: support@freescale.com
+**
+** Revisions:
+** - rev. 1.0 (2013-08-12)
+** Initial version.
+** - rev. 2.0 (2013-10-29)
+** Register accessor macros added to the memory map.
+** Symbols for Processor Expert memory map compatibility added to the memory map.
+** Startup file for gcc has been updated according to CMSIS 3.2.
+** System initialization updated.
+** MCG - registers updated.
+** PORTA, PORTB, PORTC, PORTE - registers for digital filter removed.
+** - rev. 2.1 (2013-10-30)
+** Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled.
+** - rev. 2.2 (2013-12-09)
+** DMA - EARS register removed.
+** AIPS0, AIPS1 - MPRA register updated.
+** - rev. 2.3 (2014-01-24)
+** Update according to reference manual rev. 2
+** ENET, MCG, MCM, SIM, USB - registers updated
+** - rev. 2.4 (2014-02-10)
+** The declaration of clock configurations has been moved to separate header file system_MK64F12.h
+** Update of SystemInit() and SystemCoreClockUpdate() functions.
+** - rev. 2.5 (2014-02-10)
+** The declaration of clock configurations has been moved to separate header file system_MK64F12.h
+** Update of SystemInit() and SystemCoreClockUpdate() functions.
+** Module access macro module_BASES replaced by module_BASE_PTRS.
+**
+** ###################################################################
+*/
+
+/*
+ * WARNING! DO NOT EDIT THIS FILE DIRECTLY!
+ *
+ * This file was generated automatically and any changes may be lost.
+ */
+#ifndef __HW_CMP_REGISTERS_H__
+#define __HW_CMP_REGISTERS_H__
+
+#include "MK64F12.h"
+#include "fsl_bitaccess.h"
+
+/*
+ * MK64F12 CMP
+ *
+ * High-Speed Comparator (CMP), Voltage Reference (VREF) Digital-to-Analog Converter (DAC), and Analog Mux (ANMUX)
+ *
+ * Registers defined in this header file:
+ * - HW_CMP_CR0 - CMP Control Register 0
+ * - HW_CMP_CR1 - CMP Control Register 1
+ * - HW_CMP_FPR - CMP Filter Period Register
+ * - HW_CMP_SCR - CMP Status and Control Register
+ * - HW_CMP_DACCR - DAC Control Register
+ * - HW_CMP_MUXCR - MUX Control Register
+ *
+ * - hw_cmp_t - Struct containing all module registers.
+ */
+
+#define HW_CMP_INSTANCE_COUNT (3U) /*!< Number of instances of the CMP module. */
+#define HW_CMP0 (0U) /*!< Instance number for CMP0. */
+#define HW_CMP1 (1U) /*!< Instance number for CMP1. */
+#define HW_CMP2 (2U) /*!< Instance number for CMP2. */
+
+/*******************************************************************************
+ * HW_CMP_CR0 - CMP Control Register 0
+ ******************************************************************************/
+
+/*!
+ * @brief HW_CMP_CR0 - CMP Control Register 0 (RW)
+ *
+ * Reset value: 0x00U
+ */
+typedef union _hw_cmp_cr0
+{
+ uint8_t U;
+ struct _hw_cmp_cr0_bitfields
+ {
+ uint8_t HYSTCTR : 2; /*!< [1:0] Comparator hard block hysteresis
+ * control */
+ uint8_t RESERVED0 : 2; /*!< [3:2] */
+ uint8_t FILTER_CNT : 3; /*!< [6:4] Filter Sample Count */
+ uint8_t RESERVED1 : 1; /*!< [7] */
+ } B;
+} hw_cmp_cr0_t;
+
+/*!
+ * @name Constants and macros for entire CMP_CR0 register
+ */
+/*@{*/
+#define HW_CMP_CR0_ADDR(x) ((x) + 0x0U)
+
+#define HW_CMP_CR0(x) (*(__IO hw_cmp_cr0_t *) HW_CMP_CR0_ADDR(x))
+#define HW_CMP_CR0_RD(x) (HW_CMP_CR0(x).U)
+#define HW_CMP_CR0_WR(x, v) (HW_CMP_CR0(x).U = (v))
+#define HW_CMP_CR0_SET(x, v) (HW_CMP_CR0_WR(x, HW_CMP_CR0_RD(x) | (v)))
+#define HW_CMP_CR0_CLR(x, v) (HW_CMP_CR0_WR(x, HW_CMP_CR0_RD(x) & ~(v)))
+#define HW_CMP_CR0_TOG(x, v) (HW_CMP_CR0_WR(x, HW_CMP_CR0_RD(x) ^ (v)))
+/*@}*/
+
+/*
+ * Constants & macros for individual CMP_CR0 bitfields
+ */
+
+/*!
+ * @name Register CMP_CR0, field HYSTCTR[1:0] (RW)
+ *
+ * Defines the programmable hysteresis level. The hysteresis values associated
+ * with each level are device-specific. See the Data Sheet of the device for the
+ * exact values.
+ *
+ * Values:
+ * - 00 - Level 0
+ * - 01 - Level 1
+ * - 10 - Level 2
+ * - 11 - Level 3
+ */
+/*@{*/
+#define BP_CMP_CR0_HYSTCTR (0U) /*!< Bit position for CMP_CR0_HYSTCTR. */
+#define BM_CMP_CR0_HYSTCTR (0x03U) /*!< Bit mask for CMP_CR0_HYSTCTR. */
+#define BS_CMP_CR0_HYSTCTR (2U) /*!< Bit field size in bits for CMP_CR0_HYSTCTR. */
+
+/*! @brief Read current value of the CMP_CR0_HYSTCTR field. */
+#define BR_CMP_CR0_HYSTCTR(x) (HW_CMP_CR0(x).B.HYSTCTR)
+
+/*! @brief Format value for bitfield CMP_CR0_HYSTCTR. */
+#define BF_CMP_CR0_HYSTCTR(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR0_HYSTCTR) & BM_CMP_CR0_HYSTCTR)
+
+/*! @brief Set the HYSTCTR field to a new value. */
+#define BW_CMP_CR0_HYSTCTR(x, v) (HW_CMP_CR0_WR(x, (HW_CMP_CR0_RD(x) & ~BM_CMP_CR0_HYSTCTR) | BF_CMP_CR0_HYSTCTR(v)))
+/*@}*/
+
+/*!
+ * @name Register CMP_CR0, field FILTER_CNT[6:4] (RW)
+ *
+ * Represents the number of consecutive samples that must agree prior to the
+ * comparator ouput filter accepting a new output state. For information regarding
+ * filter programming and latency, see the Functional descriptionThe CMP module
+ * can be used to compare two analog input voltages applied to INP and INM. .
+ *
+ * Values:
+ * - 000 - Filter is disabled. If SE = 1, then COUT is a logic 0. This is not a
+ * legal state, and is not recommended. If SE = 0, COUT = COUTA.
+ * - 001 - One sample must agree. The comparator output is simply sampled.
+ * - 010 - 2 consecutive samples must agree.
+ * - 011 - 3 consecutive samples must agree.
+ * - 100 - 4 consecutive samples must agree.
+ * - 101 - 5 consecutive samples must agree.
+ * - 110 - 6 consecutive samples must agree.
+ * - 111 - 7 consecutive samples must agree.
+ */
+/*@{*/
+#define BP_CMP_CR0_FILTER_CNT (4U) /*!< Bit position for CMP_CR0_FILTER_CNT. */
+#define BM_CMP_CR0_FILTER_CNT (0x70U) /*!< Bit mask for CMP_CR0_FILTER_CNT. */
+#define BS_CMP_CR0_FILTER_CNT (3U) /*!< Bit field size in bits for CMP_CR0_FILTER_CNT. */
+
+/*! @brief Read current value of the CMP_CR0_FILTER_CNT field. */
+#define BR_CMP_CR0_FILTER_CNT(x) (HW_CMP_CR0(x).B.FILTER_CNT)
+
+/*! @brief Format value for bitfield CMP_CR0_FILTER_CNT. */
+#define BF_CMP_CR0_FILTER_CNT(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR0_FILTER_CNT) & BM_CMP_CR0_FILTER_CNT)
+
+/*! @brief Set the FILTER_CNT field to a new value. */
+#define BW_CMP_CR0_FILTER_CNT(x, v) (HW_CMP_CR0_WR(x, (HW_CMP_CR0_RD(x) & ~BM_CMP_CR0_FILTER_CNT) | BF_CMP_CR0_FILTER_CNT(v)))
+/*@}*/
+
+/*******************************************************************************
+ * HW_CMP_CR1 - CMP Control Register 1
+ ******************************************************************************/
+
+/*!
+ * @brief HW_CMP_CR1 - CMP Control Register 1 (RW)
+ *
+ * Reset value: 0x00U
+ */
+typedef union _hw_cmp_cr1
+{
+ uint8_t U;
+ struct _hw_cmp_cr1_bitfields
+ {
+ uint8_t EN : 1; /*!< [0] Comparator Module Enable */
+ uint8_t OPE : 1; /*!< [1] Comparator Output Pin Enable */
+ uint8_t COS : 1; /*!< [2] Comparator Output Select */
+ uint8_t INV : 1; /*!< [3] Comparator INVERT */
+ uint8_t PMODE : 1; /*!< [4] Power Mode Select */
+ uint8_t RESERVED0 : 1; /*!< [5] */
+ uint8_t WE : 1; /*!< [6] Windowing Enable */
+ uint8_t SE : 1; /*!< [7] Sample Enable */
+ } B;
+} hw_cmp_cr1_t;
+
+/*!
+ * @name Constants and macros for entire CMP_CR1 register
+ */
+/*@{*/
+#define HW_CMP_CR1_ADDR(x) ((x) + 0x1U)
+
+#define HW_CMP_CR1(x) (*(__IO hw_cmp_cr1_t *) HW_CMP_CR1_ADDR(x))
+#define HW_CMP_CR1_RD(x) (HW_CMP_CR1(x).U)
+#define HW_CMP_CR1_WR(x, v) (HW_CMP_CR1(x).U = (v))
+#define HW_CMP_CR1_SET(x, v) (HW_CMP_CR1_WR(x, HW_CMP_CR1_RD(x) | (v)))
+#define HW_CMP_CR1_CLR(x, v) (HW_CMP_CR1_WR(x, HW_CMP_CR1_RD(x) & ~(v)))
+#define HW_CMP_CR1_TOG(x, v) (HW_CMP_CR1_WR(x, HW_CMP_CR1_RD(x) ^ (v)))
+/*@}*/
+
+/*
+ * Constants & macros for individual CMP_CR1 bitfields
+ */
+
+/*!
+ * @name Register CMP_CR1, field EN[0] (RW)
+ *
+ * Enables the Analog Comparator module. When the module is not enabled, it
+ * remains in the off state, and consumes no power. When the user selects the same
+ * input from analog mux to the positive and negative port, the comparator is
+ * disabled automatically.
+ *
+ * Values:
+ * - 0 - Analog Comparator is disabled.
+ * - 1 - Analog Comparator is enabled.
+ */
+/*@{*/
+#define BP_CMP_CR1_EN (0U) /*!< Bit position for CMP_CR1_EN. */
+#define BM_CMP_CR1_EN (0x01U) /*!< Bit mask for CMP_CR1_EN. */
+#define BS_CMP_CR1_EN (1U) /*!< Bit field size in bits for CMP_CR1_EN. */
+
+/*! @brief Read current value of the CMP_CR1_EN field. */
+#define BR_CMP_CR1_EN(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_EN))
+
+/*! @brief Format value for bitfield CMP_CR1_EN. */
+#define BF_CMP_CR1_EN(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_EN) & BM_CMP_CR1_EN)
+
+/*! @brief Set the EN field to a new value. */
+#define BW_CMP_CR1_EN(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_EN) = (v))
+/*@}*/
+
+/*!
+ * @name Register CMP_CR1, field OPE[1] (RW)
+ *
+ * Values:
+ * - 0 - CMPO is not available on the associated CMPO output pin. If the
+ * comparator does not own the pin, this field has no effect.
+ * - 1 - CMPO is available on the associated CMPO output pin. The comparator
+ * output (CMPO) is driven out on the associated CMPO output pin if the
+ * comparator owns the pin. If the comparator does not own the field, this bit has no
+ * effect.
+ */
+/*@{*/
+#define BP_CMP_CR1_OPE (1U) /*!< Bit position for CMP_CR1_OPE. */
+#define BM_CMP_CR1_OPE (0x02U) /*!< Bit mask for CMP_CR1_OPE. */
+#define BS_CMP_CR1_OPE (1U) /*!< Bit field size in bits for CMP_CR1_OPE. */
+
+/*! @brief Read current value of the CMP_CR1_OPE field. */
+#define BR_CMP_CR1_OPE(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_OPE))
+
+/*! @brief Format value for bitfield CMP_CR1_OPE. */
+#define BF_CMP_CR1_OPE(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_OPE) & BM_CMP_CR1_OPE)
+
+/*! @brief Set the OPE field to a new value. */
+#define BW_CMP_CR1_OPE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_OPE) = (v))
+/*@}*/
+
+/*!
+ * @name Register CMP_CR1, field COS[2] (RW)
+ *
+ * Values:
+ * - 0 - Set the filtered comparator output (CMPO) to equal COUT.
+ * - 1 - Set the unfiltered comparator output (CMPO) to equal COUTA.
+ */
+/*@{*/
+#define BP_CMP_CR1_COS (2U) /*!< Bit position for CMP_CR1_COS. */
+#define BM_CMP_CR1_COS (0x04U) /*!< Bit mask for CMP_CR1_COS. */
+#define BS_CMP_CR1_COS (1U) /*!< Bit field size in bits for CMP_CR1_COS. */
+
+/*! @brief Read current value of the CMP_CR1_COS field. */
+#define BR_CMP_CR1_COS(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_COS))
+
+/*! @brief Format value for bitfield CMP_CR1_COS. */
+#define BF_CMP_CR1_COS(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_COS) & BM_CMP_CR1_COS)
+
+/*! @brief Set the COS field to a new value. */
+#define BW_CMP_CR1_COS(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_COS) = (v))
+/*@}*/
+
+/*!
+ * @name Register CMP_CR1, field INV[3] (RW)
+ *
+ * Allows selection of the polarity of the analog comparator function. It is
+ * also driven to the COUT output, on both the device pin and as SCR[COUT], when
+ * OPE=0.
+ *
+ * Values:
+ * - 0 - Does not invert the comparator output.
+ * - 1 - Inverts the comparator output.
+ */
+/*@{*/
+#define BP_CMP_CR1_INV (3U) /*!< Bit position for CMP_CR1_INV. */
+#define BM_CMP_CR1_INV (0x08U) /*!< Bit mask for CMP_CR1_INV. */
+#define BS_CMP_CR1_INV (1U) /*!< Bit field size in bits for CMP_CR1_INV. */
+
+/*! @brief Read current value of the CMP_CR1_INV field. */
+#define BR_CMP_CR1_INV(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_INV))
+
+/*! @brief Format value for bitfield CMP_CR1_INV. */
+#define BF_CMP_CR1_INV(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_INV) & BM_CMP_CR1_INV)
+
+/*! @brief Set the INV field to a new value. */
+#define BW_CMP_CR1_INV(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_INV) = (v))
+/*@}*/
+
+/*!
+ * @name Register CMP_CR1, field PMODE[4] (RW)
+ *
+ * See the electrical specifications table in the device Data Sheet for details.
+ *
+ * Values:
+ * - 0 - Low-Speed (LS) Comparison mode selected. In this mode, CMP has slower
+ * output propagation delay and lower current consumption.
+ * - 1 - High-Speed (HS) Comparison mode selected. In this mode, CMP has faster
+ * output propagation delay and higher current consumption.
+ */
+/*@{*/
+#define BP_CMP_CR1_PMODE (4U) /*!< Bit position for CMP_CR1_PMODE. */
+#define BM_CMP_CR1_PMODE (0x10U) /*!< Bit mask for CMP_CR1_PMODE. */
+#define BS_CMP_CR1_PMODE (1U) /*!< Bit field size in bits for CMP_CR1_PMODE. */
+
+/*! @brief Read current value of the CMP_CR1_PMODE field. */
+#define BR_CMP_CR1_PMODE(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_PMODE))
+
+/*! @brief Format value for bitfield CMP_CR1_PMODE. */
+#define BF_CMP_CR1_PMODE(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_PMODE) & BM_CMP_CR1_PMODE)
+
+/*! @brief Set the PMODE field to a new value. */
+#define BW_CMP_CR1_PMODE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_PMODE) = (v))
+/*@}*/
+
+/*!
+ * @name Register CMP_CR1, field WE[6] (RW)
+ *
+ * At any given time, either SE or WE can be set. If a write to this register
+ * attempts to set both, then SE is set and WE is cleared. However, avoid writing
+ * 1s to both field locations because this "11" case is reserved and may change in
+ * future implementations.
+ *
+ * Values:
+ * - 0 - Windowing mode is not selected.
+ * - 1 - Windowing mode is selected.
+ */
+/*@{*/
+#define BP_CMP_CR1_WE (6U) /*!< Bit position for CMP_CR1_WE. */
+#define BM_CMP_CR1_WE (0x40U) /*!< Bit mask for CMP_CR1_WE. */
+#define BS_CMP_CR1_WE (1U) /*!< Bit field size in bits for CMP_CR1_WE. */
+
+/*! @brief Read current value of the CMP_CR1_WE field. */
+#define BR_CMP_CR1_WE(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_WE))
+
+/*! @brief Format value for bitfield CMP_CR1_WE. */
+#define BF_CMP_CR1_WE(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_WE) & BM_CMP_CR1_WE)
+
+/*! @brief Set the WE field to a new value. */
+#define BW_CMP_CR1_WE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_WE) = (v))
+/*@}*/
+
+/*!
+ * @name Register CMP_CR1, field SE[7] (RW)
+ *
+ * At any given time, either SE or WE can be set. If a write to this register
+ * attempts to set both, then SE is set and WE is cleared. However, avoid writing
+ * 1s to both field locations because this "11" case is reserved and may change in
+ * future implementations.
+ *
+ * Values:
+ * - 0 - Sampling mode is not selected.
+ * - 1 - Sampling mode is selected.
+ */
+/*@{*/
+#define BP_CMP_CR1_SE (7U) /*!< Bit position for CMP_CR1_SE. */
+#define BM_CMP_CR1_SE (0x80U) /*!< Bit mask for CMP_CR1_SE. */
+#define BS_CMP_CR1_SE (1U) /*!< Bit field size in bits for CMP_CR1_SE. */
+
+/*! @brief Read current value of the CMP_CR1_SE field. */
+#define BR_CMP_CR1_SE(x) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_SE))
+
+/*! @brief Format value for bitfield CMP_CR1_SE. */
+#define BF_CMP_CR1_SE(v) ((uint8_t)((uint8_t)(v) << BP_CMP_CR1_SE) & BM_CMP_CR1_SE)
+
+/*! @brief Set the SE field to a new value. */
+#define BW_CMP_CR1_SE(x, v) (BITBAND_ACCESS8(HW_CMP_CR1_ADDR(x), BP_CMP_CR1_SE) = (v))
+/*@}*/
+
+/*******************************************************************************
+ * HW_CMP_FPR - CMP Filter Period Register
+ ******************************************************************************/
+
+/*!
+ * @brief HW_CMP_FPR - CMP Filter Period Register (RW)
+ *
+ * Reset value: 0x00U
+ */
+typedef union _hw_cmp_fpr
+{
+ uint8_t U;
+ struct _hw_cmp_fpr_bitfields
+ {
+ uint8_t FILT_PER : 8; /*!< [7:0] Filter Sample Period */
+ } B;
+} hw_cmp_fpr_t;
+
+/*!
+ * @name Constants and macros for entire CMP_FPR register
+ */
+/*@{*/
+#define HW_CMP_FPR_ADDR(x) ((x) + 0x2U)
+
+#define HW_CMP_FPR(x) (*(__IO hw_cmp_fpr_t *) HW_CMP_FPR_ADDR(x))
+#define HW_CMP_FPR_RD(x) (HW_CMP_FPR(x).U)
+#define HW_CMP_FPR_WR(x, v) (HW_CMP_FPR(x).U = (v))
+#define HW_CMP_FPR_SET(x, v) (HW_CMP_FPR_WR(x, HW_CMP_FPR_RD(x) | (v)))
+#define HW_CMP_FPR_CLR(x, v) (HW_CMP_FPR_WR(x, HW_CMP_FPR_RD(x) & ~(v)))
+#define HW_CMP_FPR_TOG(x, v) (HW_CMP_FPR_WR(x, HW_CMP_FPR_RD(x) ^ (v)))
+/*@}*/
+
+/*
+ * Constants & macros for individual CMP_FPR bitfields
+ */
+
+/*!
+ * @name Register CMP_FPR, field FILT_PER[7:0] (RW)
+ *
+ * Specifies the sampling period, in bus clock cycles, of the comparator output
+ * filter, when CR1[SE]=0. Setting FILT_PER to 0x0 disables the filter. Filter
+ * programming and latency details appear in the Functional descriptionThe CMP
+ * module can be used to compare two analog input voltages applied to INP and INM. .
+ * This field has no effect when CR1[SE]=1. In that case, the external SAMPLE
+ * signal is used to determine the sampling period.
+ */
+/*@{*/
+#define BP_CMP_FPR_FILT_PER (0U) /*!< Bit position for CMP_FPR_FILT_PER. */
+#define BM_CMP_FPR_FILT_PER (0xFFU) /*!< Bit mask for CMP_FPR_FILT_PER. */
+#define BS_CMP_FPR_FILT_PER (8U) /*!< Bit field size in bits for CMP_FPR_FILT_PER. */
+
+/*! @brief Read current value of the CMP_FPR_FILT_PER field. */
+#define BR_CMP_FPR_FILT_PER(x) (HW_CMP_FPR(x).U)
+
+/*! @brief Format value for bitfield CMP_FPR_FILT_PER. */
+#define BF_CMP_FPR_FILT_PER(v) ((uint8_t)((uint8_t)(v) << BP_CMP_FPR_FILT_PER) & BM_CMP_FPR_FILT_PER)
+
+/*! @brief Set the FILT_PER field to a new value. */
+#define BW_CMP_FPR_FILT_PER(x, v) (HW_CMP_FPR_WR(x, v))
+/*@}*/
+
+/*******************************************************************************
+ * HW_CMP_SCR - CMP Status and Control Register
+ ******************************************************************************/
+
+/*!
+ * @brief HW_CMP_SCR - CMP Status and Control Register (RW)
+ *
+ * Reset value: 0x00U
+ */
+typedef union _hw_cmp_scr
+{
+ uint8_t U;
+ struct _hw_cmp_scr_bitfields
+ {
+ uint8_t COUT : 1; /*!< [0] Analog Comparator Output */
+ uint8_t CFF : 1; /*!< [1] Analog Comparator Flag Falling */
+ uint8_t CFR : 1; /*!< [2] Analog Comparator Flag Rising */
+ uint8_t IEF : 1; /*!< [3] Comparator Interrupt Enable Falling */
+ uint8_t IER : 1; /*!< [4] Comparator Interrupt Enable Rising */
+ uint8_t RESERVED0 : 1; /*!< [5] */
+ uint8_t DMAEN : 1; /*!< [6] DMA Enable Control */
+ uint8_t RESERVED1 : 1; /*!< [7] */
+ } B;
+} hw_cmp_scr_t;
+
+/*!
+ * @name Constants and macros for entire CMP_SCR register
+ */
+/*@{*/
+#define HW_CMP_SCR_ADDR(x) ((x) + 0x3U)
+
+#define HW_CMP_SCR(x) (*(__IO hw_cmp_scr_t *) HW_CMP_SCR_ADDR(x))
+#define HW_CMP_SCR_RD(x) (HW_CMP_SCR(x).U)
+#define HW_CMP_SCR_WR(x, v) (HW_CMP_SCR(x).U = (v))
+#define HW_CMP_SCR_SET(x, v) (HW_CMP_SCR_WR(x, HW_CMP_SCR_RD(x) | (v)))
+#define HW_CMP_SCR_CLR(x, v) (HW_CMP_SCR_WR(x, HW_CMP_SCR_RD(x) & ~(v)))
+#define HW_CMP_SCR_TOG(x, v) (HW_CMP_SCR_WR(x, HW_CMP_SCR_RD(x) ^ (v)))
+/*@}*/
+
+/*
+ * Constants & macros for individual CMP_SCR bitfields
+ */
+
+/*!
+ * @name Register CMP_SCR, field COUT[0] (RO)
+ *
+ * Returns the current value of the Analog Comparator output, when read. The
+ * field is reset to 0 and will read as CR1[INV] when the Analog Comparator module
+ * is disabled, that is, when CR1[EN] = 0. Writes to this field are ignored.
+ */
+/*@{*/
+#define BP_CMP_SCR_COUT (0U) /*!< Bit position for CMP_SCR_COUT. */
+#define BM_CMP_SCR_COUT (0x01U) /*!< Bit mask for CMP_SCR_COUT. */
+#define BS_CMP_SCR_COUT (1U) /*!< Bit field size in bits for CMP_SCR_COUT. */
+
+/*! @brief Read current value of the CMP_SCR_COUT field. */
+#define BR_CMP_SCR_COUT(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_COUT))
+/*@}*/
+
+/*!
+ * @name Register CMP_SCR, field CFF[1] (W1C)
+ *
+ * Detects a falling-edge on COUT, when set, during normal operation. CFF is
+ * cleared by writing 1 to it. During Stop modes, CFF is level sensitive is edge
+ * sensitive .
+ *
+ * Values:
+ * - 0 - Falling-edge on COUT has not been detected.
+ * - 1 - Falling-edge on COUT has occurred.
+ */
+/*@{*/
+#define BP_CMP_SCR_CFF (1U) /*!< Bit position for CMP_SCR_CFF. */
+#define BM_CMP_SCR_CFF (0x02U) /*!< Bit mask for CMP_SCR_CFF. */
+#define BS_CMP_SCR_CFF (1U) /*!< Bit field size in bits for CMP_SCR_CFF. */
+
+/*! @brief Read current value of the CMP_SCR_CFF field. */
+#define BR_CMP_SCR_CFF(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFF))
+
+/*! @brief Format value for bitfield CMP_SCR_CFF. */
+#define BF_CMP_SCR_CFF(v) ((uint8_t)((uint8_t)(v) << BP_CMP_SCR_CFF) & BM_CMP_SCR_CFF)
+
+/*! @brief Set the CFF field to a new value. */
+#define BW_CMP_SCR_CFF(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFF) = (v))
+/*@}*/
+
+/*!
+ * @name Register CMP_SCR, field CFR[2] (W1C)
+ *
+ * Detects a rising-edge on COUT, when set, during normal operation. CFR is
+ * cleared by writing 1 to it. During Stop modes, CFR is level sensitive is edge
+ * sensitive .
+ *
+ * Values:
+ * - 0 - Rising-edge on COUT has not been detected.
+ * - 1 - Rising-edge on COUT has occurred.
+ */
+/*@{*/
+#define BP_CMP_SCR_CFR (2U) /*!< Bit position for CMP_SCR_CFR. */
+#define BM_CMP_SCR_CFR (0x04U) /*!< Bit mask for CMP_SCR_CFR. */
+#define BS_CMP_SCR_CFR (1U) /*!< Bit field size in bits for CMP_SCR_CFR. */
+
+/*! @brief Read current value of the CMP_SCR_CFR field. */
+#define BR_CMP_SCR_CFR(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFR))
+
+/*! @brief Format value for bitfield CMP_SCR_CFR. */
+#define BF_CMP_SCR_CFR(v) ((uint8_t)((uint8_t)(v) << BP_CMP_SCR_CFR) & BM_CMP_SCR_CFR)
+
+/*! @brief Set the CFR field to a new value. */
+#define BW_CMP_SCR_CFR(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_CFR) = (v))
+/*@}*/
+
+/*!
+ * @name Register CMP_SCR, field IEF[3] (RW)
+ *
+ * Enables the CFF interrupt from the CMP. When this field is set, an interrupt
+ * will be asserted when CFF is set.
+ *
+ * Values:
+ * - 0 - Interrupt is disabled.
+ * - 1 - Interrupt is enabled.
+ */
+/*@{*/
+#define BP_CMP_SCR_IEF (3U) /*!< Bit position for CMP_SCR_IEF. */
+#define BM_CMP_SCR_IEF (0x08U) /*!< Bit mask for CMP_SCR_IEF. */
+#define BS_CMP_SCR_IEF (1U) /*!< Bit field size in bits for CMP_SCR_IEF. */
+
+/*! @brief Read current value of the CMP_SCR_IEF field. */
+#define BR_CMP_SCR_IEF(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IEF))
+
+/*! @brief Format value for bitfield CMP_SCR_IEF. */
+#define BF_CMP_SCR_IEF(v) ((uint8_t)((uint8_t)(v) << BP_CMP_SCR_IEF) & BM_CMP_SCR_IEF)
+
+/*! @brief Set the IEF field to a new value. */
+#define BW_CMP_SCR_IEF(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IEF) = (v))
+/*@}*/
+
+/*!
+ * @name Register CMP_SCR, field IER[4] (RW)
+ *
+ * Enables the CFR interrupt from the CMP. When this field is set, an interrupt
+ * will be asserted when CFR is set.
+ *
+ * Values:
+ * - 0 - Interrupt is disabled.
+ * - 1 - Interrupt is enabled.
+ */
+/*@{*/
+#define BP_CMP_SCR_IER (4U) /*!< Bit position for CMP_SCR_IER. */
+#define BM_CMP_SCR_IER (0x10U) /*!< Bit mask for CMP_SCR_IER. */
+#define BS_CMP_SCR_IER (1U) /*!< Bit field size in bits for CMP_SCR_IER. */
+
+/*! @brief Read current value of the CMP_SCR_IER field. */
+#define BR_CMP_SCR_IER(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IER))
+
+/*! @brief Format value for bitfield CMP_SCR_IER. */
+#define BF_CMP_SCR_IER(v) ((uint8_t)((uint8_t)(v) << BP_CMP_SCR_IER) & BM_CMP_SCR_IER)
+
+/*! @brief Set the IER field to a new value. */
+#define BW_CMP_SCR_IER(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_IER) = (v))
+/*@}*/
+
+/*!
+ * @name Register CMP_SCR, field DMAEN[6] (RW)
+ *
+ * Enables the DMA transfer triggered from the CMP module. When this field is
+ * set, a DMA request is asserted when CFR or CFF is set.
+ *
+ * Values:
+ * - 0 - DMA is disabled.
+ * - 1 - DMA is enabled.
+ */
+/*@{*/
+#define BP_CMP_SCR_DMAEN (6U) /*!< Bit position for CMP_SCR_DMAEN. */
+#define BM_CMP_SCR_DMAEN (0x40U) /*!< Bit mask for CMP_SCR_DMAEN. */
+#define BS_CMP_SCR_DMAEN (1U) /*!< Bit field size in bits for CMP_SCR_DMAEN. */
+
+/*! @brief Read current value of the CMP_SCR_DMAEN field. */
+#define BR_CMP_SCR_DMAEN(x) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_DMAEN))
+
+/*! @brief Format value for bitfield CMP_SCR_DMAEN. */
+#define BF_CMP_SCR_DMAEN(v) ((uint8_t)((uint8_t)(v) << BP_CMP_SCR_DMAEN) & BM_CMP_SCR_DMAEN)
+
+/*! @brief Set the DMAEN field to a new value. */
+#define BW_CMP_SCR_DMAEN(x, v) (BITBAND_ACCESS8(HW_CMP_SCR_ADDR(x), BP_CMP_SCR_DMAEN) = (v))
+/*@}*/
+
+/*******************************************************************************
+ * HW_CMP_DACCR - DAC Control Register
+ ******************************************************************************/
+
+/*!
+ * @brief HW_CMP_DACCR - DAC Control Register (RW)
+ *
+ * Reset value: 0x00U
+ */
+typedef union _hw_cmp_daccr
+{
+ uint8_t U;
+ struct _hw_cmp_daccr_bitfields
+ {
+ uint8_t VOSEL : 6; /*!< [5:0] DAC Output Voltage Select */
+ uint8_t VRSEL : 1; /*!< [6] Supply Voltage Reference Source Select */
+ uint8_t DACEN : 1; /*!< [7] DAC Enable */
+ } B;
+} hw_cmp_daccr_t;
+
+/*!
+ * @name Constants and macros for entire CMP_DACCR register
+ */
+/*@{*/
+#define HW_CMP_DACCR_ADDR(x) ((x) + 0x4U)
+
+#define HW_CMP_DACCR(x) (*(__IO hw_cmp_daccr_t *) HW_CMP_DACCR_ADDR(x))
+#define HW_CMP_DACCR_RD(x) (HW_CMP_DACCR(x).U)
+#define HW_CMP_DACCR_WR(x, v) (HW_CMP_DACCR(x).U = (v))
+#define HW_CMP_DACCR_SET(x, v) (HW_CMP_DACCR_WR(x, HW_CMP_DACCR_RD(x) | (v)))
+#define HW_CMP_DACCR_CLR(x, v) (HW_CMP_DACCR_WR(x, HW_CMP_DACCR_RD(x) & ~(v)))
+#define HW_CMP_DACCR_TOG(x, v) (HW_CMP_DACCR_WR(x, HW_CMP_DACCR_RD(x) ^ (v)))
+/*@}*/
+
+/*
+ * Constants & macros for individual CMP_DACCR bitfields
+ */
+
+/*!
+ * @name Register CMP_DACCR, field VOSEL[5:0] (RW)
+ *
+ * Selects an output voltage from one of 64 distinct levels. DACO = (V in /64) *
+ * (VOSEL[5:0] + 1) , so the DACO range is from V in /64 to V in .
+ */
+/*@{*/
+#define BP_CMP_DACCR_VOSEL (0U) /*!< Bit position for CMP_DACCR_VOSEL. */
+#define BM_CMP_DACCR_VOSEL (0x3FU) /*!< Bit mask for CMP_DACCR_VOSEL. */
+#define BS_CMP_DACCR_VOSEL (6U) /*!< Bit field size in bits for CMP_DACCR_VOSEL. */
+
+/*! @brief Read current value of the CMP_DACCR_VOSEL field. */
+#define BR_CMP_DACCR_VOSEL(x) (HW_CMP_DACCR(x).B.VOSEL)
+
+/*! @brief Format value for bitfield CMP_DACCR_VOSEL. */
+#define BF_CMP_DACCR_VOSEL(v) ((uint8_t)((uint8_t)(v) << BP_CMP_DACCR_VOSEL) & BM_CMP_DACCR_VOSEL)
+
+/*! @brief Set the VOSEL field to a new value. */
+#define BW_CMP_DACCR_VOSEL(x, v) (HW_CMP_DACCR_WR(x, (HW_CMP_DACCR_RD(x) & ~BM_CMP_DACCR_VOSEL) | BF_CMP_DACCR_VOSEL(v)))
+/*@}*/
+
+/*!
+ * @name Register CMP_DACCR, field VRSEL[6] (RW)
+ *
+ * Values:
+ * - 0 - V is selected as resistor ladder network supply reference V. in1 in
+ * - 1 - V is selected as resistor ladder network supply reference V. in2 in
+ */
+/*@{*/
+#define BP_CMP_DACCR_VRSEL (6U) /*!< Bit position for CMP_DACCR_VRSEL. */
+#define BM_CMP_DACCR_VRSEL (0x40U) /*!< Bit mask for CMP_DACCR_VRSEL. */
+#define BS_CMP_DACCR_VRSEL (1U) /*!< Bit field size in bits for CMP_DACCR_VRSEL. */
+
+/*! @brief Read current value of the CMP_DACCR_VRSEL field. */
+#define BR_CMP_DACCR_VRSEL(x) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_VRSEL))
+
+/*! @brief Format value for bitfield CMP_DACCR_VRSEL. */
+#define BF_CMP_DACCR_VRSEL(v) ((uint8_t)((uint8_t)(v) << BP_CMP_DACCR_VRSEL) & BM_CMP_DACCR_VRSEL)
+
+/*! @brief Set the VRSEL field to a new value. */
+#define BW_CMP_DACCR_VRSEL(x, v) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_VRSEL) = (v))
+/*@}*/
+
+/*!
+ * @name Register CMP_DACCR, field DACEN[7] (RW)
+ *
+ * Enables the DAC. When the DAC is disabled, it is powered down to conserve
+ * power.
+ *
+ * Values:
+ * - 0 - DAC is disabled.
+ * - 1 - DAC is enabled.
+ */
+/*@{*/
+#define BP_CMP_DACCR_DACEN (7U) /*!< Bit position for CMP_DACCR_DACEN. */
+#define BM_CMP_DACCR_DACEN (0x80U) /*!< Bit mask for CMP_DACCR_DACEN. */
+#define BS_CMP_DACCR_DACEN (1U) /*!< Bit field size in bits for CMP_DACCR_DACEN. */
+
+/*! @brief Read current value of the CMP_DACCR_DACEN field. */
+#define BR_CMP_DACCR_DACEN(x) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_DACEN))
+
+/*! @brief Format value for bitfield CMP_DACCR_DACEN. */
+#define BF_CMP_DACCR_DACEN(v) ((uint8_t)((uint8_t)(v) << BP_CMP_DACCR_DACEN) & BM_CMP_DACCR_DACEN)
+
+/*! @brief Set the DACEN field to a new value. */
+#define BW_CMP_DACCR_DACEN(x, v) (BITBAND_ACCESS8(HW_CMP_DACCR_ADDR(x), BP_CMP_DACCR_DACEN) = (v))
+/*@}*/
+
+/*******************************************************************************
+ * HW_CMP_MUXCR - MUX Control Register
+ ******************************************************************************/
+
+/*!
+ * @brief HW_CMP_MUXCR - MUX Control Register (RW)
+ *
+ * Reset value: 0x00U
+ */
+typedef union _hw_cmp_muxcr
+{
+ uint8_t U;
+ struct _hw_cmp_muxcr_bitfields
+ {
+ uint8_t MSEL : 3; /*!< [2:0] Minus Input Mux Control */
+ uint8_t PSEL : 3; /*!< [5:3] Plus Input Mux Control */
+ uint8_t RESERVED0 : 1; /*!< [6] */
+ uint8_t PSTM : 1; /*!< [7] Pass Through Mode Enable */
+ } B;
+} hw_cmp_muxcr_t;
+
+/*!
+ * @name Constants and macros for entire CMP_MUXCR register
+ */
+/*@{*/
+#define HW_CMP_MUXCR_ADDR(x) ((x) + 0x5U)
+
+#define HW_CMP_MUXCR(x) (*(__IO hw_cmp_muxcr_t *) HW_CMP_MUXCR_ADDR(x))
+#define HW_CMP_MUXCR_RD(x) (HW_CMP_MUXCR(x).U)
+#define HW_CMP_MUXCR_WR(x, v) (HW_CMP_MUXCR(x).U = (v))
+#define HW_CMP_MUXCR_SET(x, v) (HW_CMP_MUXCR_WR(x, HW_CMP_MUXCR_RD(x) | (v)))
+#define HW_CMP_MUXCR_CLR(x, v) (HW_CMP_MUXCR_WR(x, HW_CMP_MUXCR_RD(x) & ~(v)))
+#define HW_CMP_MUXCR_TOG(x, v) (HW_CMP_MUXCR_WR(x, HW_CMP_MUXCR_RD(x) ^ (v)))
+/*@}*/
+
+/*
+ * Constants & macros for individual CMP_MUXCR bitfields
+ */
+
+/*!
+ * @name Register CMP_MUXCR, field MSEL[2:0] (RW)
+ *
+ * Determines which input is selected for the minus input of the comparator. For
+ * INx inputs, see CMP, DAC, and ANMUX block diagrams. When an inappropriate
+ * operation selects the same input for both muxes, the comparator automatically
+ * shuts down to prevent itself from becoming a noise generator.
+ *
+ * Values:
+ * - 000 - IN0
+ * - 001 - IN1
+ * - 010 - IN2
+ * - 011 - IN3
+ * - 100 - IN4
+ * - 101 - IN5
+ * - 110 - IN6
+ * - 111 - IN7
+ */
+/*@{*/
+#define BP_CMP_MUXCR_MSEL (0U) /*!< Bit position for CMP_MUXCR_MSEL. */
+#define BM_CMP_MUXCR_MSEL (0x07U) /*!< Bit mask for CMP_MUXCR_MSEL. */
+#define BS_CMP_MUXCR_MSEL (3U) /*!< Bit field size in bits for CMP_MUXCR_MSEL. */
+
+/*! @brief Read current value of the CMP_MUXCR_MSEL field. */
+#define BR_CMP_MUXCR_MSEL(x) (HW_CMP_MUXCR(x).B.MSEL)
+
+/*! @brief Format value for bitfield CMP_MUXCR_MSEL. */
+#define BF_CMP_MUXCR_MSEL(v) ((uint8_t)((uint8_t)(v) << BP_CMP_MUXCR_MSEL) & BM_CMP_MUXCR_MSEL)
+
+/*! @brief Set the MSEL field to a new value. */
+#define BW_CMP_MUXCR_MSEL(x, v) (HW_CMP_MUXCR_WR(x, (HW_CMP_MUXCR_RD(x) & ~BM_CMP_MUXCR_MSEL) | BF_CMP_MUXCR_MSEL(v)))
+/*@}*/
+
+/*!
+ * @name Register CMP_MUXCR, field PSEL[5:3] (RW)
+ *
+ * Determines which input is selected for the plus input of the comparator. For
+ * INx inputs, see CMP, DAC, and ANMUX block diagrams. When an inappropriate
+ * operation selects the same input for both muxes, the comparator automatically
+ * shuts down to prevent itself from becoming a noise generator.
+ *
+ * Values:
+ * - 000 - IN0
+ * - 001 - IN1
+ * - 010 - IN2
+ * - 011 - IN3
+ * - 100 - IN4
+ * - 101 - IN5
+ * - 110 - IN6
+ * - 111 - IN7
+ */
+/*@{*/
+#define BP_CMP_MUXCR_PSEL (3U) /*!< Bit position for CMP_MUXCR_PSEL. */
+#define BM_CMP_MUXCR_PSEL (0x38U) /*!< Bit mask for CMP_MUXCR_PSEL. */
+#define BS_CMP_MUXCR_PSEL (3U) /*!< Bit field size in bits for CMP_MUXCR_PSEL. */
+
+/*! @brief Read current value of the CMP_MUXCR_PSEL field. */
+#define BR_CMP_MUXCR_PSEL(x) (HW_CMP_MUXCR(x).B.PSEL)
+
+/*! @brief Format value for bitfield CMP_MUXCR_PSEL. */
+#define BF_CMP_MUXCR_PSEL(v) ((uint8_t)((uint8_t)(v) << BP_CMP_MUXCR_PSEL) & BM_CMP_MUXCR_PSEL)
+
+/*! @brief Set the PSEL field to a new value. */
+#define BW_CMP_MUXCR_PSEL(x, v) (HW_CMP_MUXCR_WR(x, (HW_CMP_MUXCR_RD(x) & ~BM_CMP_MUXCR_PSEL) | BF_CMP_MUXCR_PSEL(v)))
+/*@}*/
+
+/*!
+ * @name Register CMP_MUXCR, field PSTM[7] (RW)
+ *
+ * This bit is used to enable to MUX pass through mode. Pass through mode is
+ * always available but for some devices this feature must be always disabled due to
+ * the lack of package pins.
+ *
+ * Values:
+ * - 0 - Pass Through Mode is disabled.
+ * - 1 - Pass Through Mode is enabled.
+ */
+/*@{*/
+#define BP_CMP_MUXCR_PSTM (7U) /*!< Bit position for CMP_MUXCR_PSTM. */
+#define BM_CMP_MUXCR_PSTM (0x80U) /*!< Bit mask for CMP_MUXCR_PSTM. */
+#define BS_CMP_MUXCR_PSTM (1U) /*!< Bit field size in bits for CMP_MUXCR_PSTM. */
+
+/*! @brief Read current value of the CMP_MUXCR_PSTM field. */
+#define BR_CMP_MUXCR_PSTM(x) (BITBAND_ACCESS8(HW_CMP_MUXCR_ADDR(x), BP_CMP_MUXCR_PSTM))
+
+/*! @brief Format value for bitfield CMP_MUXCR_PSTM. */
+#define BF_CMP_MUXCR_PSTM(v) ((uint8_t)((uint8_t)(v) << BP_CMP_MUXCR_PSTM) & BM_CMP_MUXCR_PSTM)
+
+/*! @brief Set the PSTM field to a new value. */
+#define BW_CMP_MUXCR_PSTM(x, v) (BITBAND_ACCESS8(HW_CMP_MUXCR_ADDR(x), BP_CMP_MUXCR_PSTM) = (v))
+/*@}*/
+
+/*******************************************************************************
+ * hw_cmp_t - module struct
+ ******************************************************************************/
+/*!
+ * @brief All CMP module registers.
+ */
+#pragma pack(1)
+typedef struct _hw_cmp
+{
+ __IO hw_cmp_cr0_t CR0; /*!< [0x0] CMP Control Register 0 */
+ __IO hw_cmp_cr1_t CR1; /*!< [0x1] CMP Control Register 1 */
+ __IO hw_cmp_fpr_t FPR; /*!< [0x2] CMP Filter Period Register */
+ __IO hw_cmp_scr_t SCR; /*!< [0x3] CMP Status and Control Register */
+ __IO hw_cmp_daccr_t DACCR; /*!< [0x4] DAC Control Register */
+ __IO hw_cmp_muxcr_t MUXCR; /*!< [0x5] MUX Control Register */
+} hw_cmp_t;
+#pragma pack()
+
+/*! @brief Macro to access all CMP registers. */
+/*! @param x CMP module instance base address. */
+/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
+ * use the '&' operator, like <code>&HW_CMP(CMP0_BASE)</code>. */
+#define HW_CMP(x) (*(hw_cmp_t *)(x))
+
+#endif /* __HW_CMP_REGISTERS_H__ */
+/* EOF */
projects / qmk_firmware.git / blobdiff