+++ /dev/null
-/**
- ******************************************************************************
- * @file stm32l1xx_hal_tim_ex.c
- * @author MCD Application Team
- * @version V1.0.0
- * @date 5-September-2014
- * @brief TIM HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Timer extension peripheral:
- * + Time Master and Slave synchronization configuration
- * + Timer remapping capabilities configuration
- @verbatim
- ==============================================================================
- ##### TIMER Extended features #####
- ==============================================================================
- [..]
- The Timer Extension features include:
- (#) Synchronization circuit to control the timer with external signals and to
- interconnect several timers together.
- (#) Timer remapping capabilities configuration
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
-*/
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32l1xx_hal.h"
-
-/** @addtogroup STM32L1xx_HAL_Driver
- * @{
- */
-
-/** @defgroup TIMEx TIMEx
- * @brief TIM HAL module driver
- * @{
- */
-
-#ifdef HAL_TIM_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup TIMEx_Exported_Functions TIMEx Exported Functions
- * @{
- */
-
-/** @defgroup TIMEx_Exported_Functions_Group1 Peripheral Control functions
- * @brief Peripheral Control functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral Control functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Configure the commutation event in case of use of the Hall sensor interface.
- (+) Configure Complementary channels, break features and dead time.
- (+) Configure Master synchronization.
- (+) Configure timer remapping capabilities.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Configures the TIM in master mode.
- * @param htim: TIM handle.
- * @param sMasterConfig: pointer to a TIM_MasterConfigTypeDef structure that
- * contains the selected trigger output (TRGO) and the Master/Slave
- * mode.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig)
-{
- /* Check the parameters */
- assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance));
- assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
- assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
-
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Reset the MMS Bits */
- htim->Instance->CR2 &= ~TIM_CR2_MMS;
- /* Select the TRGO source */
- htim->Instance->CR2 |= sMasterConfig->MasterOutputTrigger;
-
- /* Reset the MSM Bit */
- htim->Instance->SMCR &= ~TIM_SMCR_MSM;
- /* Set or Reset the MSM Bit */
- htim->Instance->SMCR |= sMasterConfig->MasterSlaveMode;
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configures the TIM2/TIM3/TIM9/TIM10/TIM11 Remapping input capabilities.
- * @param htim: TIM handle.
- * @param Remap: specifies the TIM remapping source.
- * This parameter is a combination of the following values depending on TIM instance.
- *
- * For TIM2, the parameter can have the following values:
- * @arg TIM_TIM2_ITR1_TIM10_OC: TIM2 ITR1 input is connected to TIM10 OC
- * @arg TIM_TIM2_ITR1_TIM5_TGO: TIM2 ITR1 input is connected to TIM5 TGO
- *
- * For TIM3, the parameter can have the following values:
- * @arg TIM_TIM3_ITR2_TIM11_OC: TIM3 ITR2 input is connected to TIM11 OC
- * @arg TIM_TIM3_ITR2_TIM5_TGO: TIM3 ITR2 input is connected to TIM5 TGO
- *
- * For TIM9, the parameter is a combination of 2 fields (field1 | field2):
- * field1 can have the following values:
- * @arg TIM_TIM9_ITR1_TIM3_TGO: TIM9 ITR1 input is connected to TIM3 TGO
- * @arg TIM_TIM9_ITR1_TS: TIM9 ITR1 input is connected to touch sensing I/O
- * field2 can have the following values:
- * @arg TIM_TIM9_GPIO: TIM9 Channel1 is connected to GPIO
- * @arg TIM_TIM9_LSE: TIM9 Channel1 is connected to LSE internal clock
- * @arg TIM_TIM9_GPIO1: TIM9 Channel1 is connected to GPIO
- * @arg TIM_TIM9_GPIO2: TIM9 Channel1 is connected to GPIO
- *
- * For TIM10, the parameter is a combination of 3 fields (field1 | field2 | field3):
- * field1 can have the following values:
- * @arg TIM_TIM10_TI1RMP: TIM10 Channel 1 depends on TI1_RMP
- * @arg TIM_TIM10_RI: TIM10 Channel 1 is connected to RI
- * field2 can have the following values:
- * @arg TIM_TIM10_ETR_LSE: TIM10 ETR input is connected to LSE clock
- * @arg TIM_TIM10_ETR_TIM9_TGO: TIM10 ETR input is connected to TIM9 TGO
- * field3 can have the following values:
- * @arg TIM_TIM10_GPIO: TIM10 Channel1 is connected to GPIO
- * @arg TIM_TIM10_LSI: TIM10 Channel1 is connected to LSI internal clock
- * @arg TIM_TIM10_LSE: TIM10 Channel1 is connected to LSE internal clock
- * @arg TIM_TIM10_RTC: TIM10 Channel1 is connected to RTC wakeup interrupt
- *
- * For TIM11, the parameter is a combination of 3 fields (field1 | field2 | field3):
- * field1 can have the following values:
- * @arg TIM_TIM11_TI1RMP: TIM11 Channel 1 depends on TI1_RMP
- * @arg TIM_TIM11_RI: TIM11 Channel 1 is connected to RI
- * field2 can have the following values:
- * @arg TIM_TIM11_ETR_LSE: TIM11 ETR input is connected to LSE clock
- * @arg TIM_TIM11_ETR_TIM9_TGO: TIM11 ETR input is connected to TIM9 TGO
- * field3 can have the following values:
- * @arg TIM_TIM11_GPIO: TIM11 Channel1 is connected to GPIO
- * @arg TIM_TIM11_MSI: TIM11 Channel1 is connected to MSI internal clock
- * @arg TIM_TIM11_HSE_RTC: TIM11 Channel1 is connected to HSE_RTC clock
- * @arg TIM_TIM11_GPIO1: TIM11 Channel1 is connected to GPIO
- *
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap)
-{
- __HAL_LOCK(htim);
-
- /* Check parameters */
- assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance));
- assert_param(IS_TIM_REMAP(htim->Instance,Remap));
-
- /* Set the Timer remapping configuration */
- htim->Instance->OR = Remap;
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIMEx_Exported_Functions_Group2 Extension Callbacks functions
- * @brief Extension Callbacks functions
- *
-@verbatim
- ==============================================================================
- ##### Extension Callbacks functions #####
- ==============================================================================
- [..]
- This section provides Extension TIM callback functions:
- (+) Timer Commutation callback
- (+) Timer Break callback
-
-@endverbatim
- * @{
- */
-
-
-/**
- * @}
- */
-
-/** @defgroup TIMEx_Exported_Functions_Group3 Extension Peripheral State functions
- * @brief Extension Peripheral State functions
- *
-@verbatim
- ==============================================================================
- ##### Extension Peripheral State functions #####
- ==============================================================================
- [..]
- This subsection permit to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-
-/**
- * @}
- */
-
-#endif /* HAL_TIM_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/