--- /dev/null
+/**
+ ******************************************************************************
+ * @file stm32l1xx_hal_pwr_ex.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 5-September-2014
+ * @brief Extended PWR HAL module driver.
+ * This file provides firmware functions to manage the following
+ * functionalities of the Power Controller (PWR) peripheral:
+ * + Extended Initialization and de-initialization functions
+ * + Extended Peripheral Control functions
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l1xx_hal.h"
+
+/** @addtogroup STM32L1xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup PWREx PWREx
+ * @brief PWR HAL module driver
+ * @{
+ */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+
+/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended Features Functions
+ * @brief Low Power modes configuration functions
+ *
+@verbatim
+
+ ===============================================================================
+ ##### Peripheral extended features functions #####
+ ===============================================================================
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables the Fast WakeUp from Ultra Low Power mode.
+ * @note This bit works in conjunction with ULP bit.
+ * Means, when ULP = 1 and FWU = 1 :VREFINT startup time is ignored when
+ * exiting from low power mode.
+ * @retval None
+ */
+void HAL_PWREx_EnableFastWakeUp(void)
+{
+ /* Enable the fast wake up */
+ *(__IO uint32_t *) CR_FWU_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables the Fast WakeUp from Ultra Low Power mode.
+ * @retval None
+ */
+void HAL_PWREx_DisableFastWakeUp(void)
+{
+ /* Disable the fast wake up */
+ *(__IO uint32_t *) CR_FWU_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @brief Enables the Ultra Low Power mode
+ * @retval None
+ */
+void HAL_PWREx_EnableUltraLowPower(void)
+{
+ /* Enable the Ultra Low Power mode */
+ *(__IO uint32_t *) CR_ULP_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Disables the Ultra Low Power mode
+ * @retval None
+ */
+void HAL_PWREx_DisableUltraLowPower(void)
+{
+ /* Disable the Ultra Low Power mode */
+ *(__IO uint32_t *) CR_ULP_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @brief Enters the Low Power Run mode.
+ * @note Low power run mode can only be entered when VCORE is in range 2.
+ * In addition, the dynamic voltage scaling must not be used when Low
+ * power run mode is selected. Only Stop and Sleep modes with regulator
+ * configured in Low power mode is allowed when Low power run mode is
+ * selected.
+ * @note In Low power run mode, all I/O pins keep the same state as in Run mode.
+ * @retval None
+ */
+void HAL_PWREx_EnableLowPowerRunMode(void)
+{
+ /* Enters the Low Power Run mode */
+ *(__IO uint32_t *) CR_LPSDSR_BB = (uint32_t)ENABLE;
+ *(__IO uint32_t *) CR_LPRUN_BB = (uint32_t)ENABLE;
+}
+
+/**
+ * @brief Exits the Low Power Run mode.
+ * @retval None
+ */
+void HAL_PWREx_DisableLowPowerRunMode(void)
+{
+ /* Exits the Low Power Run mode */
+ *(__IO uint32_t *) CR_LPRUN_BB = (uint32_t)DISABLE;
+ *(__IO uint32_t *) CR_LPSDSR_BB = (uint32_t)DISABLE;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_PWR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/