+++ /dev/null
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_rcc_ex.h
- * @author MCD Application Team
- * @version V1.1.0
- * @date 19-June-2014
- * @brief Header file of RCC HAL Extension module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_RCC_EX_H
-#define __STM32F4xx_HAL_RCC_EX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal_def.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup RCCEx
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
-/**
- * @brief PLLI2S Clock structure definition
- */
-typedef struct
-{
- uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
- This parameter must be a number between Min_Data = 192 and Max_Data = 432.
- This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
-
- uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
- This parameter must be a number between Min_Data = 2 and Max_Data = 7.
- This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
-
- uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock.
- This parameter must be a number between Min_Data = 2 and Max_Data = 15.
- This parameter will be used only when PLLI2S is selected as Clock Source SAI */
-}RCC_PLLI2SInitTypeDef;
-
-/**
- * @brief PLLSAI Clock structure definition
- */
-typedef struct
-{
- uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
- This parameter must be a number between Min_Data = 192 and Max_Data = 432.
- This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
-
- uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock.
- This parameter must be a number between Min_Data = 2 and Max_Data = 15.
- This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
-
- uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock
- This parameter must be a number between Min_Data = 2 and Max_Data = 7.
- This parameter will be used only when PLLSAI is selected as Clock Source LTDC */
-
-}RCC_PLLSAIInitTypeDef;
-/**
- * @brief RCC extended clocks structure definition
- */
-typedef struct
-{
- uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
- This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
-
- RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
- This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
-
- RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters.
- This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
-
- uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
- This parameter must be a number between Min_Data = 1 and Max_Data = 32
- This parameter will be used only when PLLI2S is selected as Clock Source SAI */
-
- uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
- This parameter must be a number between Min_Data = 1 and Max_Data = 32
- This parameter will be used only when PLLSAI is selected as Clock Source SAI */
-
- uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock.
- This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */
-
- uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection.
- This parameter can be a value of @ref RCC_RTC_Clock_Source */
-
- uint8_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection.
- This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
-
-}RCC_PeriphCLKInitTypeDef;
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
- defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
-/**
- * @brief PLLI2S Clock structure definition
- */
-typedef struct
-{
-#if defined(STM32F411xE)
- uint32_t PLLI2SM; /*!< PLLM: Division factor for PLLI2S VCO input clock.
- This parameter must be a number between Min_Data = 2 and Max_Data = 62 */
-#endif /* STM32F411xE */
-
- uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
- This parameter must be a number between Min_Data = 192 and Max_Data = 432
- This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
-
- uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
- This parameter must be a number between Min_Data = 2 and Max_Data = 7.
- This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
-
-}RCC_PLLI2SInitTypeDef;
-
-
-/**
- * @brief RCC extended clocks structure definition
- */
-typedef struct
-{
- uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
- This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
-
- RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
- This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
-
- uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection.
- This parameter can be a value of @ref RCC_RTC_Clock_Source */
-
-}RCC_PeriphCLKInitTypeDef;
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup RCCEx_Exported_Constants
- * @{
- */
-
-/** @defgroup RCCEx_Periph_Clock_Selection
- * @{
- */
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
-#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001)
-#define RCC_PERIPHCLK_SAI_PLLI2S ((uint32_t)0x00000002)
-#define RCC_PERIPHCLK_SAI_PLLSAI ((uint32_t)0x00000004)
-#define RCC_PERIPHCLK_LTDC ((uint32_t)0x00000008)
-#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010)
-#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020)
-#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000002F))
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
- defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
-#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001)
-#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000002)
-#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x00000003))
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_BitAddress_AliasRegion
- * @brief RCC registers bit address in the alias region
- * @{
- */
-/* --- CR Register ---*/
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
-/* Alias word address of PLLSAION bit */
-#define PLLSAION_BitNumber 0x1C
-#define CR_PLLSAION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (PLLSAION_BitNumber * 4))
-
-/* --- DCKCFGR Register ---*/
-/* Alias word address of TIMPRE bit */
-#define RCC_DCKCFGR_OFFSET (RCC_OFFSET + 0x8C)
-#define TIMPRE_BitNumber 0x18
-#define DCKCFGR_TIMPRE_BB (PERIPH_BB_BASE + (RCC_DCKCFGR_OFFSET * 32) + (TIMPRE_BitNumber * 4))
-/**
- * @}
- */
-
-/** @defgroup RCCEx_PLLI2S_Clock_Source
- * @{
- */
-#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
-/**
- * @}
- */
-
-/** @defgroup RCCEx_PLLSAI_Clock_Source
- * @{
- */
-#define IS_RCC_PLLSAIN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
-#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
-#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
-/**
- * @}
- */
-
-/** @defgroup RCCEx_PLLSAI_DIVQ
- * @{
- */
-#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
-/**
- * @}
- */
-
-/** @defgroup RCCEx_PLLI2S_DIVQ
- * @{
- */
-#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_PLLSAI_DIVR
- * @{
- */
-#define RCC_PLLSAIDIVR_2 ((uint32_t)0x00000000)
-#define RCC_PLLSAIDIVR_4 ((uint32_t)0x00010000)
-#define RCC_PLLSAIDIVR_8 ((uint32_t)0x00020000)
-#define RCC_PLLSAIDIVR_16 ((uint32_t)0x00030000)
-#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\
- ((VALUE) == RCC_PLLSAIDIVR_4) ||\
- ((VALUE) == RCC_PLLSAIDIVR_8) ||\
- ((VALUE) == RCC_PLLSAIDIVR_16))
-
-/**
- * @}
- */
-
-/** @defgroup RCCEx_SAI_BlockA_Clock_Source
- * @{
- */
-#define RCC_SAIACLKSOURCE_PLLSAI ((uint32_t)0x00000000)
-#define RCC_SAIACLKSOURCE_PLLI2S ((uint32_t)0x00100000)
-#define RCC_SAIACLKSOURCE_EXT ((uint32_t)0x00200000)
-/**
- * @}
- */
-
-/** @defgroup RCCEx_SAI_BlockB_Clock_Source
- * @{
- */
-#define RCC_SAIBCLKSOURCE_PLLSAI ((uint32_t)0x00000000)
-#define RCC_SAIBCLKSOURCE_PLLI2S ((uint32_t)0x00400000)
-#define RCC_SAIBCLKSOURCE_EXT ((uint32_t)0x00800000)
-/**
- * @}
- */
-
-/** @defgroup RCCEx_TIM_PRescaler_Selection
- * @{
- */
-#define RCC_TIMPRES_DESACTIVATED ((uint8_t)0x00)
-#define RCC_TIMPRES_ACTIVATED ((uint8_t)0x01)
-/**
- * @}
- */
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-#if defined(STM32F411xE)
-/** @defgroup RCCEx_PLLI2S_PLLI2SM
- * @{
- */
-#define IS_RCC_PLLI2SM_VALUE(VALUE) ((VALUE) <= 63)
-/**
- * @}
- */
-
-/** @defgroup RCCEx_LSE_Dual_Mode_Selection
- * @{
- */
-#define RCC_LSE_LOWPOWER_MODE ((uint8_t)0x00)
-#define RCC_LSE_HIGHDRIVE_MODE ((uint8_t)0x01)
-#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\
- ((MODE) == RCC_LSE_HIGHDRIVE_MODE))
-/**
- * @}
- */
-
-#endif /* STM32F411xE */
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-
-/*----------------------------------- STM32F42xxx/STM32F43xxx----------------------------------*/
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
-/** @brief Enables or disables the AHB1 peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- */
-#define __GPIOI_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOIEN))
-#define __GPIOF_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOFEN))
-#define __GPIOG_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOGEN))
-#define __GPIOJ_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOJEN))
-#define __GPIOK_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOKEN))
-#define __DMA2D_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_DMA2DEN))
-#define __ETHMAC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACEN))
-#define __ETHMACTX_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACTXEN))
-#define __ETHMACRX_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACRXEN))
-#define __ETHMACPTP_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACPTPEN))
-#define __USB_OTG_HS_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_OTGHSEN))
-#define __USB_OTG_HS_ULPI_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_OTGHSULPIEN))
-
-#define __GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
-#define __GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
-#define __GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
-#define __GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN))
-#define __GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN))
-#define __DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN))
-#define __ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
-#define __ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
-#define __ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
-#define __ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
-#define __USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
-#define __USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
-
-/**
- * @brief Enable ETHERNET clock.
- */
-#define __ETH_CLK_ENABLE() do { \
- __ETHMAC_CLK_ENABLE(); \
- __ETHMACTX_CLK_ENABLE(); \
- __ETHMACRX_CLK_ENABLE(); \
- } while(0)
-/**
- * @brief Disable ETHERNET clock.
- */
-#define __ETH_CLK_DISABLE() do { \
- __ETHMACTX_CLK_DISABLE(); \
- __ETHMACRX_CLK_DISABLE(); \
- __ETHMAC_CLK_DISABLE(); \
- } while(0)
-
-/** @brief Enable or disable the AHB2 peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- */
-
-#define __DCMI_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_DCMIEN))
-#define __DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
-
-#if defined(STM32F437xx)|| defined(STM32F439xx)
-#define __CRYP_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_CRYPEN))
-#define __HASH_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_HASHEN))
-
-#define __CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
-#define __HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
-#endif /* STM32F437xx || STM32F439xx */
-
-/** @brief Enables or disables the AHB3 peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- */
-#define __FMC_CLK_ENABLE() (RCC->AHB3ENR |= (RCC_AHB3ENR_FMCEN))
-#define __FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
-
-/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- */
-#define __TIM6_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM6EN))
-#define __TIM7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM7EN))
-#define __TIM12_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM12EN))
-#define __TIM13_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM13EN))
-#define __TIM14_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM14EN))
-#define __WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN))
-#define __USART3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART3EN))
-#define __UART4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART4EN))
-#define __UART5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART5EN))
-#define __CAN1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CAN1EN))
-#define __CAN2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CAN2EN))
-#define __DAC_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DACEN))
-#define __UART7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART7EN))
-#define __UART8_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART8EN))
-
-#define __TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
-#define __TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
-#define __TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
-#define __TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
-#define __TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
-#define __WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
-#define __USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
-#define __UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
-#define __UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
-#define __CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
-#define __CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
-#define __DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
-#define __UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN))
-#define __UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN))
-
-/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- */
-#define __TIM8_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM8EN))
-#define __ADC2_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC2EN))
-#define __ADC3_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC3EN))
-#define __SPI5_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI5EN))
-#define __SPI6_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI6EN))
-#define __SAI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SAI1EN))
-
-#define __TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
-#define __ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
-#define __ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
-#define __SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
-#define __SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN))
-#define __SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
-
-#if defined(STM32F429xx)|| defined(STM32F439xx)
-#define __LTDC_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_LTDCEN))
-
-#define __LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN))
-#endif /* STM32F429xx || STM32F439xx */
-
-/** @brief Force or release AHB1 peripheral reset.
- */
-#define __GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
-#define __GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
-#define __GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
-#define __ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
-#define __OTGHS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
-#define __GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST))
-#define __GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST))
-#define __DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST))
-
-#define __GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
-#define __GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
-#define __GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
-#define __ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
-#define __OTGHS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
-#define __GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST))
-#define __GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST))
-#define __DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST))
-
-/** @brief Force or release AHB2 peripheral reset.
- */
-#define __DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
-#define __DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
-
-#if defined(STM32F437xx)|| defined(STM32F439xx)
-#define __CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
-#define __HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
-
-#define __CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
-#define __HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
-#endif /* STM32F437xx || STM32F439xx */
-
-/** @brief Force or release AHB3 peripheral reset
- */
-#define __FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
-#define __FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
-
-/** @brief Force or release APB1 peripheral reset.
- */
-#define __TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
-#define __TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
-#define __TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
-#define __TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
-#define __TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
-#define __USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
-#define __UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
-#define __UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
-#define __CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
-#define __CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
-#define __DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
-#define __UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST))
-#define __UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST))
-
-#define __TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
-#define __TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
-#define __TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
-#define __TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
-#define __TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
-#define __USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
-#define __UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
-#define __UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
-#define __CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
-#define __CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
-#define __DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
-#define __UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST))
-#define __UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST))
-
-/** @brief Force or release APB2 peripheral reset.
- */
-#define __TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
-#define __SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
-#define __SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST))
-#define __SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
-
-#define __TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
-#define __SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
-#define __SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST))
-#define __SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
-
-#if defined(STM32F429xx)|| defined(STM32F439xx)
-#define __LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST))
-#define __LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST))
-#endif /* STM32F429xx|| STM32F439xx */
-
-/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
- * @note Peripheral clock gating in SLEEP mode can be used to further reduce
- * power consumption.
- * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
- * @note By default, all peripheral clocks are enabled during SLEEP mode.
- */
-#define __GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
-#define __GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
-#define __GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
-#define __SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
-#define __ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
-#define __ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
-#define __ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
-#define __ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
-#define __OTGHS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
-#define __OTGHSULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
-#define __GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN))
-#define __GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN))
-#define __SRAM3_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM3LPEN))
-#define __DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN))
-
-#define __GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
-#define __GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
-#define __GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
-#define __SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
-#define __ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
-#define __ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
-#define __ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
-#define __ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
-#define __OTGHS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
-#define __OTGHSULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
-#define __GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN))
-#define __GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN))
-#define __DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN))
-
-/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
- * @note Peripheral clock gating in SLEEP mode can be used to further reduce
- * power consumption.
- * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
- * @note By default, all peripheral clocks are enabled during SLEEP mode.
- */
-#define __DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
-#define __DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
-
-#if defined(STM32F437xx)|| defined(STM32F439xx)
-#define __CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
-#define __HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
-
-#define __CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
-#define __HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
-#endif /* STM32F437xx || STM32F439xx */
-
-/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
- * @note Peripheral clock gating in SLEEP mode can be used to further reduce
- * power consumption.
- * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
- * @note By default, all peripheral clocks are enabled during SLEEP mode.
- */
-#define __FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
-#define __FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
-
-/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
- * @note Peripheral clock gating in SLEEP mode can be used to further reduce
- * power consumption.
- * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
- * @note By default, all peripheral clocks are enabled during SLEEP mode.
- */
-#define __TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
-#define __TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
-#define __TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
-#define __TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
-#define __TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
-#define __USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
-#define __UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
-#define __UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
-#define __CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
-#define __CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
-#define __DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
-#define __UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN))
-#define __UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN))
-
-#define __TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
-#define __TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
-#define __TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
-#define __TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
-#define __TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
-#define __USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
-#define __UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
-#define __UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
-#define __CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
-#define __CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
-#define __DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
-#define __UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN))
-#define __UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN))
-
-/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
- * @note Peripheral clock gating in SLEEP mode can be used to further reduce
- * power consumption.
- * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
- * @note By default, all peripheral clocks are enabled during SLEEP mode.
- */
-#define __TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
-#define __ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
-#define __ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
-#define __SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
-#define __SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN))
-#define __SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
-
-#define __TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
-#define __ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
-#define __ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
-#define __SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
-#define __SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN))
-#define __SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
-
-#if defined(STM32F429xx)|| defined(STM32F439xx)
-#define __LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN))
-
-#define __LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN))
-#endif /* STM32F429xx || STM32F439xx */
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
-/*---------------------------------------------------------------------------------------------*/
-
-/*----------------------------------- STM32F40xxx/STM32F41xxx----------------------------------*/
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
-/** @brief Enables or disables the AHB1 peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- */
-#define __GPIOI_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOIEN))
-#define __GPIOF_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOFEN))
-#define __GPIOG_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOGEN))
-#define __USB_OTG_HS_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_OTGHSEN))
-#define __USB_OTG_HS_ULPI_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_OTGHSULPIEN))
-
-#define __GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
-#define __GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
-#define __GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
-#define __USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
-#define __USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
-
-#if defined(STM32F407xx)|| defined(STM32F417xx)
-/**
- * @brief Enable ETHERNET clock.
- */
-#define __ETHMAC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACEN))
-#define __ETHMACTX_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACTXEN))
-#define __ETHMACRX_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACRXEN))
-#define __ETHMACPTP_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACPTPEN))
-#define __ETH_CLK_ENABLE() do { \
- __ETHMAC_CLK_ENABLE(); \
- __ETHMACTX_CLK_ENABLE(); \
- __ETHMACRX_CLK_ENABLE(); \
- } while(0)
-
-/**
- * @brief Disable ETHERNET clock.
- */
-#define __ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
-#define __ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
-#define __ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
-#define __ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
-#define __ETH_CLK_DISABLE() do { \
- __ETHMACTX_CLK_DISABLE(); \
- __ETHMACRX_CLK_DISABLE(); \
- __ETHMAC_CLK_DISABLE(); \
- } while(0)
-#endif /* STM32F407xx || STM32F417xx */
-
-/** @brief Enable or disable the AHB2 peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- */
-#if defined(STM32F407xx)|| defined(STM32F417xx)
-#define __DCMI_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_DCMIEN))
-#define __DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
-#endif /* STM32F407xx || STM32F417xx */
-
-#if defined(STM32F415xx) || defined(STM32F417xx)
-#define __CRYP_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_CRYPEN))
-#define __HASH_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_HASHEN))
-
-#define __CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
-#define __HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
-#endif /* STM32F415xx || STM32F417xx */
-
-/** @brief Enables or disables the AHB3 peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- */
-#define __FSMC_CLK_ENABLE() (RCC->AHB3ENR |= (RCC_AHB3ENR_FSMCEN))
-#define __FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN))
-
-/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- */
-#define __TIM6_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM6EN))
-#define __TIM7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM7EN))
-#define __TIM12_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM12EN))
-#define __TIM13_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM13EN))
-#define __TIM14_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM14EN))
-#define __WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN))
-#define __USART3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART3EN))
-#define __UART4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART4EN))
-#define __UART5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART5EN))
-#define __CAN1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CAN1EN))
-#define __CAN2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CAN2EN))
-#define __DAC_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DACEN))
-
-#define __TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
-#define __TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
-#define __TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
-#define __TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
-#define __TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
-#define __WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
-#define __USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
-#define __UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
-#define __UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
-#define __CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
-#define __CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
-#define __DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
-
-/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
- * @note After reset, the peripheral clock (used for registers read/write access)
- * is disabled and the application software has to enable this clock before
- * using it.
- */
-#define __TIM8_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM8EN))
-#define __ADC2_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC2EN))
-#define __ADC3_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC3EN))
-
-#define __TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
-#define __ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
-#define __ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
-
-/** @brief Force or release AHB1 peripheral reset.
- */
-#define __GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
-#define __GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
-#define __GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
-#define __ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
-#define __OTGHS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
-
-#define __GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
-#define __GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
-#define __GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
-#define __ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
-#define __OTGHS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
-
-/** @brief Force or release AHB2 peripheral reset.
- */
-#if defined(STM32F407xx)|| defined(STM32F417xx)
-#define __DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
-#define __DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
-#endif /* STM32F407xx || STM32F417xx */
-
-#if defined(STM32F415xx) || defined(STM32F417xx)
-#define __CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
-#define __HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
-
-#define __CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
-#define __HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
-
-#endif /* STM32F415xx || STM32F417xx */
-
-/** @brief Force or release AHB3 peripheral reset
- */
-#define __FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST))
-#define __FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST))
-
-/** @brief Force or release APB1 peripheral reset.
- */
-#define __TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
-#define __TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
-#define __TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
-#define __TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
-#define __TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
-#define __USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
-#define __UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
-#define __UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
-#define __CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
-#define __CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
-#define __DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
-
-#define __TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
-#define __TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
-#define __TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
-#define __TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
-#define __TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
-#define __USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
-#define __UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
-#define __UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
-#define __CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
-#define __CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
-#define __DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
-
-/** @brief Force or release APB2 peripheral reset.
- */
-#define __TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
-#define __TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
-
-/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
- * @note Peripheral clock gating in SLEEP mode can be used to further reduce
- * power consumption.
- * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
- * @note By default, all peripheral clocks are enabled during SLEEP mode.
- */
-#define __GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
-#define __GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
-#define __GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
-#define __SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
-#define __ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
-#define __ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
-#define __ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
-#define __ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
-#define __OTGHS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
-#define __OTGHSULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
-
-#define __GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
-#define __GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
-#define __GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
-#define __SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
-#define __ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
-#define __ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
-#define __ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
-#define __ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
-#define __OTGHS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
-#define __OTGHSULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
-
-/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
- * @note Peripheral clock gating in SLEEP mode can be used to further reduce
- * power consumption.
- * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
- * @note By default, all peripheral clocks are enabled during SLEEP mode.
- */
-#if defined(STM32F407xx)|| defined(STM32F417xx)
-#define __DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
-#define __DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
-#endif /* STM32F407xx || STM32F417xx */
-
-#if defined(STM32F415xx) || defined(STM32F417xx)
-#define __CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
-#define __HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
-
-#define __CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
-#define __HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
-#endif /* STM32F415xx || STM32F417xx */
-
-/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
- * @note Peripheral clock gating in SLEEP mode can be used to further reduce
- * power consumption.
- * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
- * @note By default, all peripheral clocks are enabled during SLEEP mode.
- */
-#define __FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN))
-#define __FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN))
-
-/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
- * @note Peripheral clock gating in SLEEP mode can be used to further reduce
- * power consumption.
- * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
- * @note By default, all peripheral clocks are enabled during SLEEP mode.
- */
-#define __TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
-#define __TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
-#define __TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
-#define __TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
-#define __TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
-#define __USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
-#define __UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
-#define __UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
-#define __CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
-#define __CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
-#define __DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
-
-#define __TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
-#define __TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
-#define __TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
-#define __TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
-#define __TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
-#define __USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
-#define __UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
-#define __UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
-#define __CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
-#define __CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
-#define __DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
-
-/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
- * @note Peripheral clock gating in SLEEP mode can be used to further reduce
- * power consumption.
- * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
- * @note By default, all peripheral clocks are enabled during SLEEP mode.
- */
-#define __TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
-#define __ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
-#define __ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
-
-#define __TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
-#define __ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
-#define __ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
-/*---------------------------------------------------------------------------------------------*/
-
-/*------------------------------------------ STM32F411xx --------------------------------------*/
-#if defined(STM32F411xE)
-/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
- */
-#define __SPI5_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI5EN))
-#define __SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
-
-/** @brief Force or release APB2 peripheral reset.
- */
-#define __SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
-#define __SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
-
-/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
- */
-#define __SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
-#define __SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
-
-#endif /* STM32F411xE */
-/*---------------------------------------------------------------------------------------------*/
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
- defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
-
-/** @brief Macro to configure the Timers clocks prescalers
- * @note This feature is only available with STM32F429x/439x Devices.
- * @param __PRESC__ : specifies the Timers clocks prescalers selection
- * This parameter can be one of the following values:
- * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is
- * equal to HPRE if PPREx is corresponding to division by 1 or 2,
- * else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to
- * division by 4 or more.
- * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is
- * equal to HPRE if PPREx is corresponding to division by 1, 2 or 4,
- * else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding
- * to division by 8 or more.
- */
-#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) (*(__IO uint32_t *) DCKCFGR_TIMPRE_BB = (__PRESC__))
-
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F411xE */
-
-#if defined(STM32F411xE)
-
-/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
- * @note This macro must be used only when the PLLI2S is disabled.
- * @note This macro must be used only when the PLLI2S is disabled.
- * @note PLLI2S clock source is common with the main PLL (configured in
- * HAL_RCC_ClockConfig() API).
- * @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock
- * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
- * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input
- * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
- * of 2 MHz to limit PLLI2S jitter.
- * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
- * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
- * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
- * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
- * @param __PLLI2SR__: specifies the division factor for I2S clock
- * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
- * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
- * on the I2S clock frequency.
- */
-#define __HAL_RCC_PLLI2S_I2SCLK_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
- ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR)) | (__PLLI2SM__))
-#endif /* STM32F411xE */
-
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-
-/** @brief Macros to Enable or Disable the PLLISAI.
- * @note The PLLSAI is only available with STM32F429x/439x Devices.
- * @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes.
- */
-#define __HAL_RCC_PLLSAI_ENABLE() (*(__IO uint32_t *) CR_PLLSAION_BB = ENABLE)
-#define __HAL_RCC_PLLSAI_DISABLE() (*(__IO uint32_t *) CR_PLLSAION_BB = DISABLE)
-
-/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
- * @note The PLLSAI is only available with STM32F429x/439x Devices.
- * @note This function must be used only when the PLLSAI is disabled.
- * @note PLLSAI clock source is common with the main PLL (configured in
- * RCC_PLLConfig function )
- * @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
- * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
- * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
- * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
- * @param __PLLSAIQ__: specifies the division factor for SAI1 clock
- * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
- * @param __PLLSAIR__: specifies the division factor for LTDC clock
- * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
- */
-#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIQ__, __PLLSAIR__) (RCC->PLLSAICFGR = ((__PLLSAIN__) << 6) | ((__PLLSAIQ__) << 24) | ((__PLLSAIR__) << 28))
-
-/** @brief Macro used by the SAI HAL driver to configure the PLLI2S clock multiplication and division factors.
- * @note This macro must be used only when the PLLI2S is disabled.
- * @note PLLI2S clock source is common with the main PLL (configured in
- * HAL_RCC_ClockConfig() API)
- * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock.
- * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
- * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
- * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
- * @param __PLLI2SQ__: specifies the division factor for SAI1 clock.
- * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
- * @note the PLLI2SQ parameter is only available with STM32F429x/439x Devices
- * and can be configured using the __HAL_RCC_PLLI2S_PLLSAICLK_CONFIG() macro
- * @param __PLLI2SR__: specifies the division factor for I2S clock
- * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
- * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
- * on the I2S clock frequency.
- */
-#define __HAL_RCC_PLLI2S_SAICLK_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << 6) | ((__PLLI2SQ__) << 24) | ((__PLLI2SR__) << 28))
-
-/** @brief Macro to configure the SAI clock Divider coming from PLLI2S.
- * @note The SAI peripheral is only available with STM32F429x/439x Devices.
- * @note This function must be called before enabling the PLLI2S.
- * @param __PLLI2SDivQ__: specifies the PLLI2S division factor for SAI1 clock .
- * This parameter must be a number between 1 and 32.
- * SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__
- */
-#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, (__PLLI2SDivQ__)-1))
-
-/** @brief Macro to configure the SAI clock Divider coming from PLLSAI.
- * @note The SAI peripheral is only available with STM32F429x/439x Devices.
- * @note This function must be called before enabling the PLLSAI.
- * @param __PLLSAIDivQ__: specifies the PLLSAI division factor for SAI1 clock .
- * This parameter must be a number between Min_Data = 1 and Max_Data = 32.
- * SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__
- */
-#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1)<<8))
-
-/** @brief Macro to configure the LTDC clock Divider coming from PLLSAI.
- *
- * @note The LTDC peripheral is only available with STM32F429x/439x Devices.
- * @note This function must be called before enabling the PLLSAI.
- * @param __PLLSAIDivR__: specifies the PLLSAI division factor for LTDC clock .
- * This parameter must be a number between Min_Data = 2 and Max_Data = 16.
- * LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__
- */
-#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, (__PLLSAIDivR__)))
-
-/** @brief Macro to configure SAI1BlockA clock source selection.
- * @note The SAI peripheral is only available with STM32F429x/439x Devices.
- * @note This function must be called before enabling PLLSAI, PLLI2S and
- * the SAI clock.
- * @param __SOURCE__: specifies the SAI Block A clock source.
- * This parameter can be one of the following values:
- * @arg RCC_SAIACLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
- * as SAI1 Block A clock.
- * @arg RCC_SAIACLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
- * as SAI1 Block A clock.
- * @arg RCC_SAIACLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin
- * used as SAI1 Block A clock.
- */
-#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__)))
-
-/** @brief Macro to configure SAI1BlockB clock source selection.
- * @note The SAI peripheral is only available with STM32F429x/439x Devices.
- * @note This function must be called before enabling PLLSAI, PLLI2S and
- * the SAI clock.
- * @param __SOURCE__: specifies the SAI Block B clock source.
- * This parameter can be one of the following values:
- * @arg RCC_SAIBCLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
- * as SAI1 Block B clock.
- * @arg RCC_SAIBCLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
- * as SAI1 Block B clock.
- * @arg RCC_SAIBCLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin
- * used as SAI1 Block B clock.
- */
-#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__)))
-
-/** @brief Enable PLLSAI_RDY interrupt.
- */
-#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE))
-
-/** @brief Disable PLLSAI_RDY interrupt.
- */
-#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE))
-
-/** @brief Clear the PLLSAI RDY interrupt pending bits.
- */
-#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF))
-
-/** @brief Check the PLLSAI RDY interrupt has occurred or not.
- * @retval The new state (TRUE or FALSE).
- */
-#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE))
-
-/** @brief Check PLLSAI RDY flag is set or not.
- * @retval The new state (TRUE or FALSE).
- */
-#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY))
-
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-/* Exported functions --------------------------------------------------------*/
-HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
-void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
-
-#if defined(STM32F411xE)
-void HAL_RCCEx_SelectLSEMode(uint8_t Mode);
-#endif /* STM32F411xE */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_HAL_RCC_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/