+++ /dev/null
-/**
- ******************************************************************************
- * @file stm32f30x_gpio.h
- * @author MCD Application Team
- * @version V1.1.0
- * @date 27-February-2014
- * @brief This file contains all the functions prototypes for the GPIO
- * firmware library.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F30x_GPIO_H
-#define __STM32F30x_GPIO_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f30x.h"
-
-/** @addtogroup STM32F30x_StdPeriph_Driver
- * @{
- */
-
-/** @addtogroup GPIO
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-
-#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
- ((PERIPH) == GPIOB) || \
- ((PERIPH) == GPIOC) || \
- ((PERIPH) == GPIOD) || \
- ((PERIPH) == GPIOE) || \
- ((PERIPH) == GPIOF))
-
-#define IS_GPIO_LIST_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
- ((PERIPH) == GPIOB) || \
- ((PERIPH) == GPIOD))
-/** @defgroup Configuration_Mode_enumeration
- * @{
- */
-typedef enum
-{
- GPIO_Mode_IN = 0x00, /*!< GPIO Input Mode */
- GPIO_Mode_OUT = 0x01, /*!< GPIO Output Mode */
- GPIO_Mode_AF = 0x02, /*!< GPIO Alternate function Mode */
- GPIO_Mode_AN = 0x03 /*!< GPIO Analog In/Out Mode */
-}GPIOMode_TypeDef;
-
-#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_IN)|| ((MODE) == GPIO_Mode_OUT) || \
- ((MODE) == GPIO_Mode_AF)|| ((MODE) == GPIO_Mode_AN))
-/**
- * @}
- */
-
-/** @defgroup Output_type_enumeration
- * @{
- */
-typedef enum
-{
- GPIO_OType_PP = 0x00,
- GPIO_OType_OD = 0x01
-}GPIOOType_TypeDef;
-
-#define IS_GPIO_OTYPE(OTYPE) (((OTYPE) == GPIO_OType_PP) || ((OTYPE) == GPIO_OType_OD))
-
-/**
- * @}
- */
-
-/** @defgroup Output_Maximum_frequency_enumeration
- * @{
- */
-typedef enum
-{
- GPIO_Speed_Level_1 = 0x01, /*!< Fast Speed */
- GPIO_Speed_Level_2 = 0x02, /*!< Meduim Speed */
- GPIO_Speed_Level_3 = 0x03 /*!< High Speed */
-}GPIOSpeed_TypeDef;
-
-#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_Level_1) || ((SPEED) == GPIO_Speed_Level_2) || \
- ((SPEED) == GPIO_Speed_Level_3))
-/**
- * @}
- */
-
-/** @defgroup Configuration_Pull-Up_Pull-Down_enumeration
- * @{
- */
-typedef enum
-{
- GPIO_PuPd_NOPULL = 0x00,
- GPIO_PuPd_UP = 0x01,
- GPIO_PuPd_DOWN = 0x02
-}GPIOPuPd_TypeDef;
-
-#define IS_GPIO_PUPD(PUPD) (((PUPD) == GPIO_PuPd_NOPULL) || ((PUPD) == GPIO_PuPd_UP) || \
- ((PUPD) == GPIO_PuPd_DOWN))
-/**
- * @}
- */
-
-/** @defgroup Bit_SET_and_Bit_RESET_enumeration
- * @{
- */
-typedef enum
-{
- Bit_RESET = 0,
- Bit_SET
-}BitAction;
-
-#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET))
-/**
- * @}
- */
-
-/**
- * @brief GPIO Init structure definition
- */
-typedef struct
-{
- uint32_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured.
- This parameter can be any value of @ref GPIO_pins_define */
-
- GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins.
- This parameter can be a value of @ref GPIOMode_TypeDef */
-
- GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins.
- This parameter can be a value of @ref GPIOSpeed_TypeDef */
-
- GPIOOType_TypeDef GPIO_OType; /*!< Specifies the operating output type for the selected pins.
- This parameter can be a value of @ref GPIOOType_TypeDef */
-
- GPIOPuPd_TypeDef GPIO_PuPd; /*!< Specifies the operating Pull-up/Pull down for the selected pins.
- This parameter can be a value of @ref GPIOPuPd_TypeDef */
-}GPIO_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup GPIO_Exported_Constants
- * @{
- */
-
-/** @defgroup GPIO_pins_define
- * @{
- */
-#define GPIO_Pin_0 ((uint16_t)0x0001) /*!< Pin 0 selected */
-#define GPIO_Pin_1 ((uint16_t)0x0002) /*!< Pin 1 selected */
-#define GPIO_Pin_2 ((uint16_t)0x0004) /*!< Pin 2 selected */
-#define GPIO_Pin_3 ((uint16_t)0x0008) /*!< Pin 3 selected */
-#define GPIO_Pin_4 ((uint16_t)0x0010) /*!< Pin 4 selected */
-#define GPIO_Pin_5 ((uint16_t)0x0020) /*!< Pin 5 selected */
-#define GPIO_Pin_6 ((uint16_t)0x0040) /*!< Pin 6 selected */
-#define GPIO_Pin_7 ((uint16_t)0x0080) /*!< Pin 7 selected */
-#define GPIO_Pin_8 ((uint16_t)0x0100) /*!< Pin 8 selected */
-#define GPIO_Pin_9 ((uint16_t)0x0200) /*!< Pin 9 selected */
-#define GPIO_Pin_10 ((uint16_t)0x0400) /*!< Pin 10 selected */
-#define GPIO_Pin_11 ((uint16_t)0x0800) /*!< Pin 11 selected */
-#define GPIO_Pin_12 ((uint16_t)0x1000) /*!< Pin 12 selected */
-#define GPIO_Pin_13 ((uint16_t)0x2000) /*!< Pin 13 selected */
-#define GPIO_Pin_14 ((uint16_t)0x4000) /*!< Pin 14 selected */
-#define GPIO_Pin_15 ((uint16_t)0x8000) /*!< Pin 15 selected */
-#define GPIO_Pin_All ((uint16_t)0xFFFF) /*!< All pins selected */
-
-#define IS_GPIO_PIN(PIN) ((PIN) != (uint16_t)0x00)
-
-#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \
- ((PIN) == GPIO_Pin_1) || \
- ((PIN) == GPIO_Pin_2) || \
- ((PIN) == GPIO_Pin_3) || \
- ((PIN) == GPIO_Pin_4) || \
- ((PIN) == GPIO_Pin_5) || \
- ((PIN) == GPIO_Pin_6) || \
- ((PIN) == GPIO_Pin_7) || \
- ((PIN) == GPIO_Pin_8) || \
- ((PIN) == GPIO_Pin_9) || \
- ((PIN) == GPIO_Pin_10) || \
- ((PIN) == GPIO_Pin_11) || \
- ((PIN) == GPIO_Pin_12) || \
- ((PIN) == GPIO_Pin_13) || \
- ((PIN) == GPIO_Pin_14) || \
- ((PIN) == GPIO_Pin_15))
-
-/**
- * @}
- */
-
-/** @defgroup GPIO_Pin_sources
- * @{
- */
-#define GPIO_PinSource0 ((uint8_t)0x00)
-#define GPIO_PinSource1 ((uint8_t)0x01)
-#define GPIO_PinSource2 ((uint8_t)0x02)
-#define GPIO_PinSource3 ((uint8_t)0x03)
-#define GPIO_PinSource4 ((uint8_t)0x04)
-#define GPIO_PinSource5 ((uint8_t)0x05)
-#define GPIO_PinSource6 ((uint8_t)0x06)
-#define GPIO_PinSource7 ((uint8_t)0x07)
-#define GPIO_PinSource8 ((uint8_t)0x08)
-#define GPIO_PinSource9 ((uint8_t)0x09)
-#define GPIO_PinSource10 ((uint8_t)0x0A)
-#define GPIO_PinSource11 ((uint8_t)0x0B)
-#define GPIO_PinSource12 ((uint8_t)0x0C)
-#define GPIO_PinSource13 ((uint8_t)0x0D)
-#define GPIO_PinSource14 ((uint8_t)0x0E)
-#define GPIO_PinSource15 ((uint8_t)0x0F)
-
-#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \
- ((PINSOURCE) == GPIO_PinSource1) || \
- ((PINSOURCE) == GPIO_PinSource2) || \
- ((PINSOURCE) == GPIO_PinSource3) || \
- ((PINSOURCE) == GPIO_PinSource4) || \
- ((PINSOURCE) == GPIO_PinSource5) || \
- ((PINSOURCE) == GPIO_PinSource6) || \
- ((PINSOURCE) == GPIO_PinSource7) || \
- ((PINSOURCE) == GPIO_PinSource8) || \
- ((PINSOURCE) == GPIO_PinSource9) || \
- ((PINSOURCE) == GPIO_PinSource10) || \
- ((PINSOURCE) == GPIO_PinSource11) || \
- ((PINSOURCE) == GPIO_PinSource12) || \
- ((PINSOURCE) == GPIO_PinSource13) || \
- ((PINSOURCE) == GPIO_PinSource14) || \
- ((PINSOURCE) == GPIO_PinSource15))
-/**
- * @}
- */
-
-/** @defgroup GPIO_Alternate_function_selection_define
- * @{
- */
-
-/**
- * @brief AF 0 selection
- */
-#define GPIO_AF_0 ((uint8_t)0x00) /* JTCK-SWCLK, JTDI, JTDO/TRACESW0, JTMS-SWDAT,
- MCO, NJTRST, TRACED, TRACECK */
-/**
- * @brief AF 1 selection
- */
-#define GPIO_AF_1 ((uint8_t)0x01) /* OUT, TIM2, TIM15, TIM16, TIM17 */
-
-/**
- * @brief AF 2 selection
- */
-#define GPIO_AF_2 ((uint8_t)0x02) /* COMP1_OUT, TIM1, TIM2, TIM3, TIM4, TIM8, TIM15, TIM16 */
-
-/**
- * @brief AF 3 selection
- */
-#define GPIO_AF_3 ((uint8_t)0x03) /* COMP7_OUT, TIM8, TIM15, Touch, HRTIM1 */
-
-/**
- * @brief AF 4 selection
- */
-#define GPIO_AF_4 ((uint8_t)0x04) /* I2C1, I2C2, TIM1, TIM8, TIM16, TIM17 */
-
-/**
- * @brief AF 5 selection
- */
-#define GPIO_AF_5 ((uint8_t)0x05) /* IR_OUT, I2S2, I2S3, SPI1, SPI2, TIM8, USART4, USART5 */
-
-/**
- * @brief AF 6 selection
- */
-#define GPIO_AF_6 ((uint8_t)0x06) /* IR_OUT, I2S2, I2S3, SPI2, SPI3, TIM1, TIM8 */
-
-/**
- * @brief AF 7 selection
- */
-#define GPIO_AF_7 ((uint8_t)0x07) /* AOP2_OUT, CAN, COMP3_OUT, COMP5_OUT, COMP6_OUT,
- USART1, USART2, USART3 */
-
-/**
- * @brief AF 8 selection
- */
-#define GPIO_AF_8 ((uint8_t)0x08) /* COMP1_OUT, COMP2_OUT, COMP3_OUT, COMP4_OUT,
- COMP5_OUT, COMP6_OUT */
-
-/**
- * @brief AF 9 selection
- */
-#define GPIO_AF_9 ((uint8_t)0x09) /* AOP4_OUT, CAN, TIM1, TIM8, TIM15 */
-
-/**
- * @brief AF 10 selection
- */
-#define GPIO_AF_10 ((uint8_t)0x0A) /* AOP1_OUT, AOP3_OUT, TIM2, TIM3, TIM4, TIM8, TIM17 */
-
-/**
- * @brief AF 11 selection
- */
-#define GPIO_AF_11 ((uint8_t)0x0B) /* TIM1, TIM8 */
-
-/**
- * @brief AF 12 selection
- */
-#define GPIO_AF_12 ((uint8_t)0x0C) /* TIM1, HRTIM1 */
-
-/**
- * @brief AF 13 selection
- */
-#define GPIO_AF_13 ((uint8_t)0x0D) /* HRTIM1, AOP2_OUT */
-
-/**
- * @brief AF 14 selection
- */
-#define GPIO_AF_14 ((uint8_t)0x0E) /* USBDM, USBDP */
-
-/**
- * @brief AF 15 selection
- */
-#define GPIO_AF_15 ((uint8_t)0x0F) /* OUT */
-
-#define IS_GPIO_AF(AF) (((AF) == GPIO_AF_0)||((AF) == GPIO_AF_1)||\
- ((AF) == GPIO_AF_2)||((AF) == GPIO_AF_3)||\
- ((AF) == GPIO_AF_4)||((AF) == GPIO_AF_5)||\
- ((AF) == GPIO_AF_6)||((AF) == GPIO_AF_7)||\
- ((AF) == GPIO_AF_8)||((AF) == GPIO_AF_9)||\
- ((AF) == GPIO_AF_10)||((AF) == GPIO_AF_11)||\
- ((AF) == GPIO_AF_12)||((AF) == GPIO_AF_13)||\
- ((AF) == GPIO_AF_14)||((AF) == GPIO_AF_15))
-
-/**
- * @}
- */
-
-/** @defgroup GPIO_Speed_Legacy
- * @{
- */
-
-#define GPIO_Speed_10MHz GPIO_Speed_Level_1 /*!< Fast Speed:10MHz */
-#define GPIO_Speed_2MHz GPIO_Speed_Level_2 /*!< Medium Speed:2MHz */
-#define GPIO_Speed_50MHz GPIO_Speed_Level_3 /*!< High Speed:50MHz */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-/* Function used to set the GPIO configuration to the default reset state *****/
-void GPIO_DeInit(GPIO_TypeDef* GPIOx);
-
-/* Initialization and Configuration functions *********************************/
-void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
-void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
-void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-
-/* GPIO Read and Write functions **********************************************/
-uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
-uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
-void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
-void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal);
-
-/* GPIO Alternate functions configuration functions ***************************/
-void GPIO_PinAFConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_PinSource, uint8_t GPIO_AF);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F30x_GPIO_H */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/