+++ /dev/null
-/**
- ******************************************************************************
- * @file stm32f3xx_hal_uart.h
- * @author MCD Application Team
- * @version V1.1.0
- * @date 12-Sept-2014
- * @brief Header file of UART HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F3xx_HAL_UART_H
-#define __STM32F3xx_HAL_UART_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f3xx_hal_def.h"
-
-/** @addtogroup STM32F3xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup UART
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup UART_Exported_Types UART Exported Types
- * @{
- */
-
-/**
- * @brief UART Init Structure definition
- */
-typedef struct
-{
- uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
- The baud rate register is computed using the following formula:
- - If oversampling is 16 or in LIN mode,
- Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate)))
- - If oversampling is 8,
- Baud Rate Register[15:4] = ((2 * PCLKx) / ((huart->Init.BaudRate)))[15:4]
- Baud Rate Register[3] = 0
- Baud Rate Register[2:0] = (((2 * PCLKx) / ((huart->Init.BaudRate)))[3:0]) >> 1 */
-
- uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
- This parameter can be a value of @ref UARTEx_Word_Length */
-
- uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
- This parameter can be a value of @ref UART_Stop_Bits */
-
- uint32_t Parity; /*!< Specifies the parity mode.
- This parameter can be a value of @ref UART_Parity
- @note When parity is enabled, the computed parity is inserted
- at the MSB position of the transmitted data (9th bit when
- the word length is set to 9 data bits; 8th bit when the
- word length is set to 8 data bits). */
-
- uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
- This parameter can be a value of @ref UART_Mode */
-
- uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
- or disabled.
- This parameter can be a value of @ref UART_Hardware_Flow_Control */
-
- uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
- This parameter can be a value of @ref UART_Over_Sampling */
-
- uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
- Selecting the single sample method increases the receiver tolerance to clock
- deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */
-}UART_InitTypeDef;
-
-/**
- * @brief UART Advanced Features initalization structure definition
- */
-typedef struct
-{
- uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several
- Advanced Features may be initialized at the same time .
- This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type */
-
- uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
- This parameter can be a value of @ref UART_Tx_Inv */
-
- uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
- This parameter can be a value of @ref UART_Rx_Inv */
-
- uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
- vs negative/inverted logic).
- This parameter can be a value of @ref UART_Data_Inv */
-
- uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
- This parameter can be a value of @ref UART_Rx_Tx_Swap */
-
- uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
- This parameter can be a value of @ref UART_Overrun_Disable */
-
- uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
- This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error */
-
- uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled.
- This parameter can be a value of @ref UART_AutoBaudRate_Enable */
-
- uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate
- detection is carried out.
- This parameter can be a value of @ref UART_AutoBaud_Rate_Mode */
-
- uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
- This parameter can be a value of @ref UART_MSB_First */
-} UART_AdvFeatureInitTypeDef;
-
-/**
- * @brief UART wake up from stop mode parameters
- */
-typedef struct
-{
- uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
- This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
- If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
- be filled up. */
-
- uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
- This parameter can be a value of @ref UART_WakeUp_Address_Length */
-
- uint8_t Address; /*!< UART/USART node address (7-bit long max) */
-} UART_WakeUpTypeDef;
-
-/**
- * @brief HAL UART State structures definition
- */
-typedef enum
-{
- HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
- HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
- HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
- HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
- HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
- HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
- HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
- HAL_UART_STATE_ERROR = 0x04 /*!< Error */
-}HAL_UART_StateTypeDef;
-
-/**
- * @brief HAL UART Error Code structure definition
- */
-typedef enum
-{
- HAL_UART_ERROR_NONE = 0x00, /*!< No error */
- HAL_UART_ERROR_PE = 0x01, /*!< Parity error */
- HAL_UART_ERROR_NE = 0x02, /*!< Noise error */
- HAL_UART_ERROR_FE = 0x04, /*!< frame error */
- HAL_UART_ERROR_ORE = 0x08, /*!< Overrun error */
- HAL_UART_ERROR_DMA = 0x10 /*!< DMA transfer error */
-}HAL_UART_ErrorTypeDef;
-
-/**
- * @brief UART clock sources definition
- */
-typedef enum
-{
- UART_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
- UART_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */
- UART_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
- UART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
- UART_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
- UART_CLOCKSOURCE_UNDEFINED = 0x10 /*!< Undefined clock source */
-}UART_ClockSourceTypeDef;
-
-/**
- * @brief UART handle Structure definition
- */
-typedef struct
-{
- USART_TypeDef *Instance; /* UART registers base address */
-
- UART_InitTypeDef Init; /* UART communication parameters */
-
- UART_AdvFeatureInitTypeDef AdvancedInit; /* UART Advanced Features initialization parameters */
-
- uint8_t *pTxBuffPtr; /* Pointer to UART Tx transfer Buffer */
-
- uint16_t TxXferSize; /* UART Tx Transfer size */
-
- uint16_t TxXferCount; /* UART Tx Transfer Counter */
-
- uint8_t *pRxBuffPtr; /* Pointer to UART Rx transfer Buffer */
-
- uint16_t RxXferSize; /* UART Rx Transfer size */
-
- uint16_t RxXferCount; /* UART Rx Transfer Counter */
-
- uint16_t Mask; /* UART Rx RDR register mask */
-
- DMA_HandleTypeDef *hdmatx; /* UART Tx DMA Handle parameters */
-
- DMA_HandleTypeDef *hdmarx; /* UART Rx DMA Handle parameters */
-
- HAL_LockTypeDef Lock; /* Locking object */
-
- HAL_UART_StateTypeDef State; /* UART communication state */
-
- HAL_UART_ErrorTypeDef ErrorCode; /* UART Error code */
-
-}UART_HandleTypeDef;
-
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup UART_Exported_Constants UART Exported Constants
- * @{
- */
-
-/** @defgroup UART_Stop_Bits UART Number of Stop Bits
- * @{
- */
-#define UART_STOPBITS_1 ((uint32_t)0x0000)
-#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
-#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
- ((STOPBITS) == UART_STOPBITS_2))
-/**
- * @}
- */
-
-/** @defgroup UART_Parity UART Parity
- * @{
- */
-#define UART_PARITY_NONE ((uint32_t)0x0000)
-#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
-#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
-#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
- ((PARITY) == UART_PARITY_EVEN) || \
- ((PARITY) == UART_PARITY_ODD))
-/**
- * @}
- */
-
-/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
- * @{
- */
-#define UART_HWCONTROL_NONE ((uint32_t)0x0000)
-#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
-#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
-#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
-#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
- (((CONTROL) == UART_HWCONTROL_NONE) || \
- ((CONTROL) == UART_HWCONTROL_RTS) || \
- ((CONTROL) == UART_HWCONTROL_CTS) || \
- ((CONTROL) == UART_HWCONTROL_RTS_CTS))
-/**
- * @}
- */
-
-/** @defgroup UART_Mode UART Transfer Mode
- * @{
- */
-#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
-#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
-#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
-#define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)(UART_MODE_TX_RX)))) == (uint32_t)0x00) && ((MODE) != (uint32_t)0x00))
-/**
- * @}
- */
-
- /** @defgroup UART_State UART State
- * @{
- */
-#define UART_STATE_DISABLE ((uint32_t)0x0000)
-#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
-#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
- ((STATE) == UART_STATE_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup UART_Over_Sampling UART Over Sampling
- * @{
- */
-#define UART_OVERSAMPLING_16 ((uint32_t)0x0000)
-#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
-#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
- ((SAMPLING) == UART_OVERSAMPLING_8))
-/**
- * @}
- */
-
-/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method
- * @{
- */
-#define UART_ONEBIT_SAMPLING_DISABLED ((uint32_t)0x0000)
-#define UART_ONEBIT_SAMPLING_ENABLED ((uint32_t)USART_CR3_ONEBIT)
-#define IS_UART_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == UART_ONEBIT_SAMPLING_DISABLED) || \
- ((ONEBIT) == UART_ONEBIT_SAMPLING_ENABLED))
-/**
- * @}
- */
-
-/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode
- * @{
- */
-#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
-#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
-#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1)
-#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE)
-#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
- ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \
- ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \
- ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
-/**
- * @}
- */
-
-/** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut
- * @{
- */
-#define UART_RECEIVER_TIMEOUT_DISABLE ((uint32_t)0x00000000)
-#define UART_RECEIVER_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN)
-#define IS_UART_RECEIVER_TIMEOUT(TIMEOUT) (((TIMEOUT) == UART_RECEIVER_TIMEOUT_DISABLE) || \
- ((TIMEOUT) == UART_RECEIVER_TIMEOUT_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup UART_LIN UART Local Interconnection Network mode
- * @{
- */
-#define UART_LIN_DISABLE ((uint32_t)0x00000000)
-#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN)
-#define IS_UART_LIN(LIN) (((LIN) == UART_LIN_DISABLE) || \
- ((LIN) == UART_LIN_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection
- * @{
- */
-#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
-#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
-#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
- ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
-/**
- * @}
- */
-
-
-
-/** @defgroup UART_One_Bit UART One Bit sampling
- * @{
- */
-#define UART_ONE_BIT_SAMPLE_DISABLED ((uint32_t)0x00000000)
-#define UART_ONE_BIT_SAMPLE_ENABLED ((uint32_t)USART_CR3_ONEBIT)
-#define IS_UART_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == UART_ONE_BIT_SAMPLE_DISABLED) || \
- ((ONEBIT) == UART_ONE_BIT_SAMPLE_ENABLED))
-/**
- * @}
- */
-
-/** @defgroup UART_DMA_Tx UART DMA Tx
- * @{
- */
-#define UART_DMA_TX_DISABLE ((uint32_t)0x00000000)
-#define UART_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT)
-#define IS_UART_DMA_TX(DMATX) (((DMATX) == UART_DMA_TX_DISABLE) || \
- ((DMATX) == UART_DMA_TX_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup UART_DMA_Rx UART DMA Rx
- * @{
- */
-#define UART_DMA_RX_DISABLE ((uint32_t)0x0000)
-#define UART_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR)
-#define IS_UART_DMA_RX(DMARX) (((DMARX) == UART_DMA_RX_DISABLE) || \
- ((DMARX) == UART_DMA_RX_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection
- * @{
- */
-#define UART_HALF_DUPLEX_DISABLE ((uint32_t)0x0000)
-#define UART_HALF_DUPLEX_ENABLE ((uint32_t)USART_CR3_HDSEL)
-#define IS_UART_HALF_DUPLEX(HDSEL) (((HDSEL) == UART_HALF_DUPLEX_DISABLE) || \
- ((HDSEL) == UART_HALF_DUPLEX_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup UART_WakeUp_Methods UART WakeUp Methods
- * @{
- */
-#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000)
-#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE)
-#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
- ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
-/**
- * @}
- */
-
-/** @defgroup UART_Flags UART Status Flags
- * Elements values convention: 0xXXXX
- * - 0xXXXX : Flag mask in the ISR register
- * @{
- */
-#define UART_FLAG_REACK ((uint32_t)0x00400000)
-#define UART_FLAG_TEACK ((uint32_t)0x00200000)
-#define UART_FLAG_WUF ((uint32_t)0x00100000)
-#define UART_FLAG_RWU ((uint32_t)0x00080000)
-#define UART_FLAG_SBKF ((uint32_t)0x00040000
-#define UART_FLAG_CMF ((uint32_t)0x00020000)
-#define UART_FLAG_BUSY ((uint32_t)0x00010000)
-#define UART_FLAG_ABRF ((uint32_t)0x00008000)
-#define UART_FLAG_ABRE ((uint32_t)0x00004000)
-#define UART_FLAG_EOBF ((uint32_t)0x00001000)
-#define UART_FLAG_RTOF ((uint32_t)0x00000800)
-#define UART_FLAG_CTS ((uint32_t)0x00000400)
-#define UART_FLAG_CTSIF ((uint32_t)0x00000200)
-#define UART_FLAG_LBDF ((uint32_t)0x00000100)
-#define UART_FLAG_TXE ((uint32_t)0x00000080)
-#define UART_FLAG_TC ((uint32_t)0x00000040)
-#define UART_FLAG_RXNE ((uint32_t)0x00000020)
-#define UART_FLAG_IDLE ((uint32_t)0x00000010)
-#define UART_FLAG_ORE ((uint32_t)0x00000008)
-#define UART_FLAG_NE ((uint32_t)0x00000004)
-#define UART_FLAG_FE ((uint32_t)0x00000002)
-#define UART_FLAG_PE ((uint32_t)0x00000001)
-/**
- * @}
- */
-
-/** @defgroup UART_Interrupt_definition UART Interrupts Definition
- * Elements values convention: 0000ZZZZ0XXYYYYYb
- * - YYYYY : Interrupt source position in the XX register (5bits)
- * - XX : Interrupt source register (2bits)
- * - 01: CR1 register
- * - 10: CR2 register
- * - 11: CR3 register
- * - ZZZZ : Flag position in the ISR register(4bits)
- * @{
- */
-#define UART_IT_PE ((uint16_t)0x0028)
-#define UART_IT_TXE ((uint16_t)0x0727)
-#define UART_IT_TC ((uint16_t)0x0626)
-#define UART_IT_RXNE ((uint16_t)0x0525)
-#define UART_IT_IDLE ((uint16_t)0x0424)
-#define UART_IT_LBD ((uint16_t)0x0846)
-#define UART_IT_CTS ((uint16_t)0x096A)
-#define UART_IT_CM ((uint16_t)0x142E)
-#define UART_IT_WUF ((uint16_t)0x1476)
-
-/** Elements values convention: 000000000XXYYYYYb
- * - YYYYY : Interrupt source position in the XX register (5bits)
- * - XX : Interrupt source register (2bits)
- * - 01: CR1 register
- * - 10: CR2 register
- * - 11: CR3 register
- */
-#define UART_IT_ERR ((uint16_t)0x0060)
-
-/** Elements values convention: 0000ZZZZ00000000b
- * - ZZZZ : Flag position in the ISR register(4bits)
- */
-#define UART_IT_ORE ((uint16_t)0x0300)
-#define UART_IT_NE ((uint16_t)0x0200)
-#define UART_IT_FE ((uint16_t)0x0100)
-/**
- * @}
- */
-
-/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags
- * @{
- */
-#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
-#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
-#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
-#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
-#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
-#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
-#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */
-#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
-#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
-#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
-#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
-#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */
-/**
- * @}
- */
-
-/** @defgroup UART_Request_Parameters UART Request Parameters
- * @{
- */
-#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
-#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */
-#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */
-#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
-#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
-#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
- ((PARAM) == UART_SENDBREAK_REQUEST) || \
- ((PARAM) == UART_MUTE_MODE_REQUEST) || \
- ((PARAM) == UART_RXDATA_FLUSH_REQUEST) || \
- ((PARAM) == UART_TXDATA_FLUSH_REQUEST))
-/**
- * @}
- */
-
-/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type
- * @{
- */
-#define UART_ADVFEATURE_NO_INIT ((uint32_t)0x00000000)
-#define UART_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001)
-#define UART_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002)
-#define UART_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004)
-#define UART_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008)
-#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010)
-#define UART_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020)
-#define UART_ADVFEATURE_AUTOBAUDRATE_INIT ((uint32_t)0x00000040)
-#define UART_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080)
-#define IS_UART_ADVFEATURE_INIT(INIT) ((INIT) <= (UART_ADVFEATURE_NO_INIT | \
- UART_ADVFEATURE_TXINVERT_INIT | \
- UART_ADVFEATURE_RXINVERT_INIT | \
- UART_ADVFEATURE_DATAINVERT_INIT | \
- UART_ADVFEATURE_SWAP_INIT | \
- UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
- UART_ADVFEATURE_DMADISABLEONERROR_INIT | \
- UART_ADVFEATURE_AUTOBAUDRATE_INIT | \
- UART_ADVFEATURE_MSBFIRST_INIT))
-/**
- * @}
- */
-
-/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion
- * @{
- */
-#define UART_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000)
-#define UART_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV)
-#define IS_UART_ADVFEATURE_TXINV(TXINV) (((TXINV) == UART_ADVFEATURE_TXINV_DISABLE) || \
- ((TXINV) == UART_ADVFEATURE_TXINV_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion
- * @{
- */
-#define UART_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000)
-#define UART_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV)
-#define IS_UART_ADVFEATURE_RXINV(RXINV) (((RXINV) == UART_ADVFEATURE_RXINV_DISABLE) || \
- ((RXINV) == UART_ADVFEATURE_RXINV_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion
- * @{
- */
-#define UART_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000)
-#define UART_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV)
-#define IS_UART_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == UART_ADVFEATURE_DATAINV_DISABLE) || \
- ((DATAINV) == UART_ADVFEATURE_DATAINV_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap
- * @{
- */
-#define UART_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000)
-#define UART_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP)
-#define IS_UART_ADVFEATURE_SWAP(SWAP) (((SWAP) == UART_ADVFEATURE_SWAP_DISABLE) || \
- ((SWAP) == UART_ADVFEATURE_SWAP_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable
- * @{
- */
-#define UART_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000)
-#define UART_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS)
-#define IS_UART_OVERRUN(OVERRUN) (((OVERRUN) == UART_ADVFEATURE_OVERRUN_ENABLE) || \
- ((OVERRUN) == UART_ADVFEATURE_OVERRUN_DISABLE))
-/**
- * @}
- */
-
-/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable
- * @{
- */
-#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE ((uint32_t)0x00000000)
-#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE ((uint32_t)USART_CR2_ABREN)
-#define IS_UART_ADVFEATURE_AUTOBAUDRATE(AUTOBAUDRATE) (((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \
- ((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error
- * @{
- */
-#define UART_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000)
-#define UART_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE)
-#define IS_UART_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \
- ((DMA) == UART_ADVFEATURE_DMA_DISABLEONRXERROR))
-/**
- * @}
- */
-
-/** @defgroup UART_MSB_First UART Advanced Feature MSB First
- * @{
- */
-#define UART_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000)
-#define UART_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST)
-#define IS_UART_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \
- ((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable
- * @{
- */
-#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000)
-#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM)
-#define IS_UART_ADVFEATURE_STOPMODE(STOPMODE) (((STOPMODE) == UART_ADVFEATURE_STOPMODE_DISABLE) || \
- ((STOPMODE) == UART_ADVFEATURE_STOPMODE_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable
- * @{
- */
-#define UART_ADVFEATURE_MUTEMODE_DISABLE ((uint32_t)0x00000000)
-#define UART_ADVFEATURE_MUTEMODE_ENABLE ((uint32_t)USART_CR1_MME)
-#define IS_UART_MUTE_MODE(MUTE) (((MUTE) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \
- ((MUTE) == UART_ADVFEATURE_MUTEMODE_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register
- * @{
- */
-#define UART_CR2_ADDRESS_LSB_POS ((uint32_t) 24)
-/**
- * @}
- */
-
-/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
- * @{
- */
-#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x0000)
-#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1)
-#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS)
-#define IS_UART_WAKEUP_SELECTION(WAKE) (((WAKE) == UART_WAKEUP_ON_ADDRESS) || \
- ((WAKE) == UART_WAKEUP_ON_STARTBIT) || \
- ((WAKE) == UART_WAKEUP_ON_READDATA_NONEMPTY))
-/**
- * @}
- */
-
-/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity
- * @{
- */
-#define UART_DE_POLARITY_HIGH ((uint32_t)0x00000000)
-#define UART_DE_POLARITY_LOW ((uint32_t)USART_CR3_DEP)
-#define IS_UART_DE_POLARITY(POLARITY) (((POLARITY) == UART_DE_POLARITY_HIGH) || \
- ((POLARITY) == UART_DE_POLARITY_LOW))
-/**
- * @}
- */
-
-/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register
- * @{
- */
-#define UART_CR1_DEAT_ADDRESS_LSB_POS ((uint32_t) 21)
-/**
- * @}
- */
-
-/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register
- * @{
- */
-#define UART_CR1_DEDT_ADDRESS_LSB_POS ((uint32_t) 16)
-/**
- * @}
- */
-
-/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask
- * @{
- */
-#define UART_IT_MASK ((uint32_t)0x001F)
-/**
- * @}
- */
-
-/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value
- * @{
- */
-#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFF
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup UART_Exported_Macros UART Exported Macros
- * @{
- */
-
-/** @brief Reset UART handle state
- * @param __HANDLE__: UART handle.
- * @retval None
- */
-#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
-
-/** @brief Checks whether the specified UART flag is set or not.
- * @param __HANDLE__: specifies the UART Handle.
- * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
- * UART peripheral (datasheet: up to five USART/UARTs)
- * @param __FLAG__: specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg UART_FLAG_REACK: Receive enable ackowledge flag
- * @arg UART_FLAG_TEACK: Transmit enable ackowledge flag
- * @arg UART_FLAG_WUF: Wake up from stop mode flag
- * @arg UART_FLAG_RWU: Receiver wake up flag (is the UART in mute mode)
- * @arg UART_FLAG_SBKF: Send Break flag
- * @arg UART_FLAG_CMF: Character match flag
- * @arg UART_FLAG_BUSY: Busy flag
- * @arg UART_FLAG_ABRF: Auto Baud rate detection flag
- * @arg UART_FLAG_ABRE: Auto Baud rate detection error flag
- * @arg UART_FLAG_EOBF: End of block flag
- * @arg UART_FLAG_RTOF: Receiver timeout flag
- * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
- * @arg UART_FLAG_LBD: LIN Break detection flag
- * @arg UART_FLAG_TXE: Transmit data register empty flag
- * @arg UART_FLAG_TC: Transmission Complete flag
- * @arg UART_FLAG_RXNE: Receive data register not empty flag
- * @arg UART_FLAG_IDLE: Idle Line detection flag
- * @arg UART_FLAG_ORE: OverRun Error flag
- * @arg UART_FLAG_NE: Noise Error flag
- * @arg UART_FLAG_FE: Framing Error flag
- * @arg UART_FLAG_PE: Parity Error flag
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
-
-/** @brief Enables the specified UART interrupt.
- * @param __HANDLE__: specifies the UART Handle.
- * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
- * UART peripheral. (datasheet: up to five USART/UARTs)
- * @param __INTERRUPT__: specifies the UART interrupt source to enable.
- * This parameter can be one of the following values:
- * @arg UART_IT_WUF: Wakeup from stop mode interrupt
- * @arg UART_IT_CM: Character match interrupt
- * @arg UART_IT_CTS: CTS change interrupt
- * @arg UART_IT_LBD: LIN Break detection interrupt
- * @arg UART_IT_TXE: Transmit Data Register empty interrupt
- * @arg UART_IT_TC: Transmission complete interrupt
- * @arg UART_IT_RXNE: Receive Data register not empty interrupt
- * @arg UART_IT_IDLE: Idle line detection interrupt
- * @arg UART_IT_PE: Parity Error interrupt
- * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
- * @retval None
- */
-#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
- ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
- ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))))
-
-
-/** @brief Disables the specified UART interrupt.
- * @param __HANDLE__: specifies the UART Handle.
- * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
- * UART peripheral. (datasheet: up to five USART/UARTs)
- * @param __INTERRUPT__: specifies the UART interrupt source to disable.
- * This parameter can be one of the following values:
- * @arg UART_IT_WUF: Wakeup from stop mode interrupt
- * @arg UART_IT_CM: Character match interrupt
- * @arg UART_IT_CTS: CTS change interrupt
- * @arg UART_IT_LBD: LIN Break detection interrupt
- * @arg UART_IT_TXE: Transmit Data Register empty interrupt
- * @arg UART_IT_TC: Transmission complete interrupt
- * @arg UART_IT_RXNE: Receive Data register not empty interrupt
- * @arg UART_IT_IDLE: Idle line detection interrupt
- * @arg UART_IT_PE: Parity Error interrupt
- * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
- * @retval None
- */
-#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
- ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
- ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))))
-
-/** @brief Checks whether the specified UART interrupt has occurred or not.
- * @param __HANDLE__: specifies the UART Handle.
- * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
- * UART peripheral. (datasheet: up to five USART/UARTs)
- * @param __IT__: specifies the UART interrupt to check.
- * This parameter can be one of the following values:
- * @arg UART_IT_WUF: Wakeup from stop mode interrupt
- * @arg UART_IT_CM: Character match interrupt
- * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
- * @arg UART_IT_LBD: LIN Break detection interrupt
- * @arg UART_IT_TXE: Transmit Data Register empty interrupt
- * @arg UART_IT_TC: Transmission complete interrupt
- * @arg UART_IT_RXNE: Receive Data register not empty interrupt
- * @arg UART_IT_IDLE: Idle line detection interrupt
- * @arg UART_IT_ORE: OverRun Error interrupt
- * @arg UART_IT_NE: Noise Error interrupt
- * @arg UART_IT_FE: Framing Error interrupt
- * @arg UART_IT_PE: Parity Error interrupt
- * @retval The new state of __IT__ (TRUE or FALSE).
- */
-#define __HAL_UART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
-
-/** @brief Checks whether the specified UART interrupt source is enabled.
- * @param __HANDLE__: specifies the UART Handle.
- * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
- * UART peripheral. (datasheet: up to five USART/UARTs)
- * @param __IT__: specifies the UART interrupt source to check.
- * This parameter can be one of the following values:
- * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
- * @arg UART_IT_LBD: LIN Break detection interrupt
- * @arg UART_IT_TXE: Transmit Data Register empty interrupt
- * @arg UART_IT_TC: Transmission complete interrupt
- * @arg UART_IT_RXNE: Receive Data register not empty interrupt
- * @arg UART_IT_IDLE: Idle line detection interrupt
- * @arg UART_IT_ORE: OverRun Error interrupt
- * @arg UART_IT_NE: Noise Error interrupt
- * @arg UART_IT_FE: Framing Error interrupt
- * @arg UART_IT_PE: Parity Error interrupt
- * @retval The new state of __IT__ (TRUE or FALSE).
- */
-#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
- (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & UART_IT_MASK)))
-
-/** @brief Clears the specified UART ISR flag, in setting the proper ICR register flag.
- * @param __HANDLE__: specifies the UART Handle.
- * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
- * UART peripheral. (datasheet: up to five USART/UARTs)
- * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
- * to clear the corresponding interrupt
- * This parameter can be one of the following values:
- * @arg UART_CLEAR_PEF: Parity Error Clear Flag
- * @arg UART_CLEAR_FEF: Framing Error Clear Flag
- * @arg UART_CLEAR_NEF: Noise detected Clear Flag
- * @arg UART_CLEAR_OREF: OverRun Error Clear Flag
- * @arg UART_CLEAR_IDLEF: IDLE line detected Clear Flag
- * @arg UART_CLEAR_TCF: Transmission Complete Clear Flag
- * @arg UART_CLEAR_LBDF: LIN Break Detection Clear Flag
- * @arg UART_CLEAR_CTSF: CTS Interrupt Clear Flag
- * @arg UART_CLEAR_RTOF: Receiver Time Out Clear Flag
- * @arg UART_CLEAR_EOBF: End Of Block Clear Flag
- * @arg UART_CLEAR_CMF: Character Match Clear Flag
- * @arg UART_CLEAR_WUF: Wake Up from stop mode Clear Flag
- * @retval None
- */
-#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
-
-/** @brief Set a specific UART request flag.
- * @param __HANDLE__: specifies the UART Handle.
- * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
- * UART peripheral. (datasheet: up to five USART/UARTs)
- * @param __REQ__: specifies the request flag to set
- * This parameter can be one of the following values:
- * @arg UART_AUTOBAUD_REQUEST: Auto-Baud Rate Request
- * @arg UART_SENDBREAK_REQUEST: Send Break Request
- * @arg UART_MUTE_MODE_REQUEST: Mute Mode Request
- * @arg UART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
- * @arg UART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
- * @retval None
- */
-#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint32_t)(__REQ__))
-
-/** @brief Enable UART
- * @param __HANDLE__: specifies the UART Handle.
- * The Handle Instance can be UARTx where x: 1, 2, 3, 4 or 5 to select the UART peripheral
- * @retval None
- */
-#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
-
-/** @brief Disable UART
- * @param __HANDLE__: specifies the UART Handle.
- * The Handle Instance can be UARTx where x: 1, 2, 3, 4 or 5 to select the UART peripheral
- * @retval None
- */
-#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
-
-/** @brief BRR division operation to set BRR register in 8-bit oversampling mode
- * @param _PCLK_: UART clock
- * @param _BAUD_: Baud rate set by the user
- * @retval Division result
- */
-#define __DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*2)/((_BAUD_)))
-
-/** @brief BRR division operation to set BRR register in 16-bit oversampling mode
- * @param _PCLK_: UART clock
- * @param _BAUD_: Baud rate set by the user
- * @retval Division result
- */
-#define __DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_))/((_BAUD_)))
-
-/** @brief Check UART Baud rate
- * @param BAUDRATE: Baudrate specified by the user
- * The maximum Baud Rate is derived from the maximum clock on F3 (i.e. 72 MHz)
- * divided by the smallest oversampling used on the USART (i.e. 8)
- * @retval Test result (TRUE or FALSE).
- */
-#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001)
-
-/** @brief Check UART assertion time
- * @param TIME: 5-bit value assertion time
- * @retval Test result (TRUE or FALSE).
- */
-#define IS_UART_ASSERTIONTIME(TIME) ((TIME) <= 0x1F)
-
-/** @brief Check UART deassertion time
- * @param TIME: 5-bit value deassertion time
- * @retval Test result (TRUE or FALSE).
- */
-#define IS_UART_DEASSERTIONTIME(TIME) ((TIME) <= 0x1F)
-
-/**
- * @}
- */
-
-/* Include UART HAL Extended module */
-#include "stm32f3xx_hal_uart_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup UART_Exported_Functions UART Exported Functions
- * @{
- */
-
-/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- * @{
- */
-/* Initialization and de-initialization functions ****************************/
-HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
-HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
-HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
-void HAL_UART_MspInit(UART_HandleTypeDef *huart);
-void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
-/**
- * @}
- */
-
-/** @addtogroup UART_Exported_Functions_Group2 Input and Output operation functions
- * @brief UART Transmit/Receive functions
- * @{
- */
-/* IO operation functions *****************************************************/
-HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
-void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
-void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
-void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
-void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
-void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
-void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
-void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart);
-
-HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
-/**
- * @}
- */
-
-/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions
- * @brief UART control functions
- * @{
- */
-/* Peripheral Control functions ***********************************************/
-HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart);
-void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
-
-HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart);
-void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
-void UART_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
-/**
- * @}
- */
-
-/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions
- * @brief Peripheral State and Error functions
- * @{
- */
-/* Peripheral State and Error functions ***************************************/
-HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
-uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F3xx_HAL_UART_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
projects / qmk_firmware.git / blobdiff