+++ /dev/null
-/**
- ******************************************************************************
- * @file stm32f3xx_hal_comp.h
- * @author MCD Application Team
- * @version V1.1.0
- * @date 12-Sept-2014
- * @brief Header file of COMP HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F3xx_HAL_COMP_H
-#define __STM32F3xx_HAL_COMP_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f3xx_hal_def.h"
-
-/** @addtogroup STM32F3xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup COMP
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup COMP_Exported_Types COMP Exported Types
- * @{
- */
-/**
- * @brief COMP Init structure definition
- */
-
-typedef struct
-{
-
- uint32_t InvertingInput; /*!< Selects the inverting input of the comparator.
- This parameter can be a value of @ref COMPEx_InvertingInput */
-
- uint32_t NonInvertingInput; /*!< Selects the non inverting input of the comparator.
- This parameter can be a value of @ref COMPEx_NonInvertingInput
- Note: Only available on STM32F302xB/xC, STM32F303xB/xC and STM32F358xx devices */
-
- uint32_t Output; /*!< Selects the output redirection of the comparator.
- This parameter can be a value of @ref COMPEx_Output */
-
- uint32_t OutputPol; /*!< Selects the output polarity of the comparator.
- This parameter can be a value of @ref COMP_OutputPolarity */
-
- uint32_t Hysteresis; /*!< Selects the hysteresis voltage of the comparator.
- This parameter can be a value of @ref COMPEx_Hysteresis
- Note: Only available on STM32F302xB/xC, STM32F303xB/xC, STM32F373xB/xC, STM32F358xx and STM32F378xx devices */
-
- uint32_t BlankingSrce; /*!< Selects the output blanking source of the comparator.
- This parameter can be a value of @ref COMPEx_BlankingSrce
- Note: Not available on STM32F373xB/C and STM32F378xx devices */
-
- uint32_t Mode; /*!< Selects the operating comsumption mode of the comparator
- to adjust the speed/consumption.
- This parameter can be a value of @ref COMPEx_Mode
- Note: Not available on STM32F301x6/x8, STM32F302x6/x8, STM32F334x6/x8, STM32F318xx and STM32F328xx devices */
-
- uint32_t WindowMode; /*!< Selects the window mode of the comparator X (X=2, 4 or 6 if available).
- This parameter can be a value of @ref COMPEx_WindowMode */
-
- uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator (interrupt mode).
- This parameter can be a value of @ref COMP_TriggerMode */
-
-}COMP_InitTypeDef;
-
-/**
- * @brief HAL State structures definition
- */
-typedef enum
-{
- HAL_COMP_STATE_RESET = 0x00, /*!< COMP not yet initialized or disabled */
- HAL_COMP_STATE_READY = 0x01, /*!< COMP initialized and ready for use */
- HAL_COMP_STATE_READY_LOCKED = 0x11, /*!< COMP initialized but the configuration is locked */
- HAL_COMP_STATE_BUSY = 0x02, /*!< COMP is running */
- HAL_COMP_STATE_BUSY_LOCKED = 0x12 /*!< COMP is running and the configuration is locked */
-}HAL_COMP_StateTypeDef;
-
-
-/**
- * @brief PPP Handle Structure definition
- */
-typedef struct
-{
- COMP_TypeDef *Instance; /*!< Register base address */
- COMP_InitTypeDef Init; /*!< COMP required parameters */
- HAL_LockTypeDef Lock; /*!< Locking object */
- __IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */
-
-}COMP_HandleTypeDef;
-
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup COMP_Exported_Constants COMP Exported Constants
- * @{
- */
-
-/** @defgroup COMP_OutputPolarity COMP Output Polarity
- * @{
- */
-#define COMP_OUTPUTPOL_NONINVERTED ((uint32_t)0x00000000) /*!< COMP output on GPIO isn't inverted */
-#define COMP_OUTPUTPOL_INVERTED COMP_CSR_COMPxPOL /*!< COMP output on GPIO is inverted */
-#define IS_COMP_OUTPUTPOL(POL) (((POL) == COMP_OUTPUTPOL_NONINVERTED) || \
- ((POL) == COMP_OUTPUTPOL_INVERTED))
-/**
- * @}
- */
-
-/** @defgroup COMP_OutputLevel COMP Output Level
- * @{
- */
-/* When output polarity is not inverted, comparator output is low when
- the non-inverting input is at a lower voltage than the inverting input*/
-#define COMP_OUTPUTLEVEL_LOW ((uint32_t)0x00000000)
-/* When output polarity is not inverted, comparator output is high when
- the non-inverting input is at a higher voltage than the inverting input */
-#define COMP_OUTPUTLEVEL_HIGH COMP_CSR_COMPxOUT
-/**
- * @}
- */
-
-/** @defgroup COMP_TriggerMode COMP Trigger Mode
- * @{
- */
-#define COMP_TRIGGERMODE_NONE ((uint32_t)0x00000000) /*!< No External Interrupt trigger detection */
-#define COMP_TRIGGERMODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */
-#define COMP_TRIGGERMODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */
-#define COMP_TRIGGERMODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
-#define IS_COMP_TRIGGERMODE(MODE) (((MODE) == COMP_TRIGGERMODE_NONE) || \
- ((MODE) == COMP_TRIGGERMODE_IT_RISING) || \
- ((MODE) == COMP_TRIGGERMODE_IT_FALLING) || \
- ((MODE) == COMP_TRIGGERMODE_IT_RISING_FALLING))
-/**
- * @}
- */
-
-#define COMP_LOCK_DISABLE ((uint32_t)0x00000000)
-#define COMP_LOCK_ENABLE COMP_CSR_COMPxLOCK
-
-#define COMP_STATE_BIT_LOCK ((uint32_t)0x10)
-
-/**
- * @}
- */
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup COMP_Exported_Macros COMP Exported Macros
- * @{
- */
-
-/** @brief Reset COMP handle state
- * @param __HANDLE__: COMP handle.
- * @retval None
- */
-#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET)
-/**
- * @}
- */
-
-/* Include COMP HAL Extended module */
-#include "stm32f3xx_hal_comp_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup COMP_Exported_Functions COMP Exported Functions
- * @{
- */
-
-/** @addtogroup COMP_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- * @{
- */
-/* Initialization and de-initialization functions ****************************/
-HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp);
-HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp);
-void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp);
-void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp);
-/**
- * @}
- */
-
-/** @addtogroup COMP_Exported_Functions_Group2 Input and Output operation functions
- * @brief Data transfers functions
- * @{
- */
-/* IO operation functions *****************************************************/
-HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp);
-HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp);
-HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp);
-HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp);
-void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp);
-/**
- * @}
- */
-
-/** @addtogroup COMP_Exported_Functions_Group3 Peripheral Control functions
- * @brief management functions
- * @{
- */
-/* Peripheral Control functions ***********************************************/
-HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp);
-uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp);
-
-/* Callback in Interrupt mode */
-void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp);
-/**
- * @}
- */
-
-/** @addtogroup COMP_Exported_Functions_Group4 Peripheral State functions
- * @brief Peripheral State functions
- * @{
- */
-/* Peripheral State and Error functions ***************************************/
-HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F3xx_HAL_COMP_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
projects / qmk_firmware.git / blobdiff