+++ /dev/null
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_rtc_ex.h
- * @author MCD Application Team
- * @version V1.0.0
- * @date 15-December-2014
- * @brief Header file of RTC HAL Extension module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_RTC_EX_H
-#define __STM32F1xx_HAL_RTC_EX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup RTCEx
- * @{
- */
-
-/** @addtogroup RTCEx_Private_Macros
- * @{
- */
-
-/** @defgroup RTCEx_Alias_For_Legacy Alias define maintained for legacy
- * @{
- */
-#define HAL_RTCEx_TamperTimeStampIRQHandler HAL_RTCEx_TamperIRQHandler
-
-/**
- * @}
- */
-
-/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
- * @{
- */
-#define IS_RTC_TAMPER(__TAMPER__) ((__TAMPER__) == RTC_TAMPER_1)
-
-#define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
- ((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL))
-
-#if RTC_BKP_NUMBER > 10
-#define IS_RTC_BKP(BKP) (((BKP) <= (uint32_t) RTC_BKP_DR10) || (((BKP) >= (uint32_t) RTC_BKP_DR11) && ((BKP) <= (uint32_t) RTC_BKP_DR42)))
-#else
-#define IS_RTC_BKP(BKP) ((BKP) <= (uint32_t) RTC_BKP_NUMBER)
-#endif
-#define IS_RTC_SMOOTH_CALIB_MINUS(__VALUE__) ((__VALUE__) <= 0x0000007F)
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
- * @{
- */
-/**
- * @brief RTC Tamper structure definition
- */
-typedef struct
-{
- uint32_t Tamper; /*!< Specifies the Tamper Pin.
- This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
-
- uint32_t Trigger; /*!< Specifies the Tamper Trigger.
- This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
-
-}RTC_TamperTypeDef;
-
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
- * @{
- */
-
-/** @defgroup RTCEx_Tamper_Pins_Definitions Tamper Pins Definitions
- * @{
- */
-#define RTC_TAMPER_1 BKP_CR_TPE /*!< Select tamper to be enabled (mainly for legacy purposes) */
-
-/**
- * @}
- */
-
-/** @defgroup RTCEx_Tamper_Trigger_Definitions Tamper Trigger Definitions
- * @{
- */
-#define RTC_TAMPERTRIGGER_LOWLEVEL BKP_CR_TPAL /*!< A high level on the TAMPER pin resets all data backup registers (if TPE bit is set) */
-#define RTC_TAMPERTRIGGER_HIGHLEVEL ((uint32_t)0x00000000) /*!< A low level on the TAMPER pin resets all data backup registers (if TPE bit is set) */
-
-/**
- * @}
- */
-
-/** @defgroup RTCEx_Backup_Registers_Definitions Backup Registers Definitions
- * @{
- */
-#if RTC_BKP_NUMBER > 0
-#define RTC_BKP_DR1 ((uint32_t)0x00000001)
-#define RTC_BKP_DR2 ((uint32_t)0x00000002)
-#define RTC_BKP_DR3 ((uint32_t)0x00000003)
-#define RTC_BKP_DR4 ((uint32_t)0x00000004)
-#define RTC_BKP_DR5 ((uint32_t)0x00000005)
-#define RTC_BKP_DR6 ((uint32_t)0x00000006)
-#define RTC_BKP_DR7 ((uint32_t)0x00000007)
-#define RTC_BKP_DR8 ((uint32_t)0x00000008)
-#define RTC_BKP_DR9 ((uint32_t)0x00000009)
-#define RTC_BKP_DR10 ((uint32_t)0x0000000A)
-#endif /* RTC_BKP_NUMBER > 0 */
-
-#if RTC_BKP_NUMBER > 10
-#define RTC_BKP_DR11 ((uint32_t)0x00000010)
-#define RTC_BKP_DR12 ((uint32_t)0x00000011)
-#define RTC_BKP_DR13 ((uint32_t)0x00000012)
-#define RTC_BKP_DR14 ((uint32_t)0x00000013)
-#define RTC_BKP_DR15 ((uint32_t)0x00000014)
-#define RTC_BKP_DR16 ((uint32_t)0x00000015)
-#define RTC_BKP_DR17 ((uint32_t)0x00000016)
-#define RTC_BKP_DR18 ((uint32_t)0x00000017)
-#define RTC_BKP_DR19 ((uint32_t)0x00000018)
-#define RTC_BKP_DR20 ((uint32_t)0x00000019)
-#define RTC_BKP_DR21 ((uint32_t)0x0000001A)
-#define RTC_BKP_DR22 ((uint32_t)0x0000001B)
-#define RTC_BKP_DR23 ((uint32_t)0x0000001C)
-#define RTC_BKP_DR24 ((uint32_t)0x0000001D)
-#define RTC_BKP_DR25 ((uint32_t)0x0000001E)
-#define RTC_BKP_DR26 ((uint32_t)0x0000001F)
-#define RTC_BKP_DR27 ((uint32_t)0x00000020)
-#define RTC_BKP_DR28 ((uint32_t)0x00000021)
-#define RTC_BKP_DR29 ((uint32_t)0x00000022)
-#define RTC_BKP_DR30 ((uint32_t)0x00000023)
-#define RTC_BKP_DR31 ((uint32_t)0x00000024)
-#define RTC_BKP_DR32 ((uint32_t)0x00000025)
-#define RTC_BKP_DR33 ((uint32_t)0x00000026)
-#define RTC_BKP_DR34 ((uint32_t)0x00000027)
-#define RTC_BKP_DR35 ((uint32_t)0x00000028)
-#define RTC_BKP_DR36 ((uint32_t)0x00000029)
-#define RTC_BKP_DR37 ((uint32_t)0x0000002A)
-#define RTC_BKP_DR38 ((uint32_t)0x0000002B)
-#define RTC_BKP_DR39 ((uint32_t)0x0000002C)
-#define RTC_BKP_DR40 ((uint32_t)0x0000002D)
-#define RTC_BKP_DR41 ((uint32_t)0x0000002E)
-#define RTC_BKP_DR42 ((uint32_t)0x0000002F)
-#endif /* RTC_BKP_NUMBER > 10 */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
- * @{
- */
-
-/**
- * @brief Enable the RTC Tamper interrupt.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled
- * This parameter can be any combination of the following values:
- * @arg RTC_IT_TAMP1: Tamper A interrupt
- * @retval None
- */
-#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT(BKP->CSR, (__INTERRUPT__))
-
-/**
- * @brief Disable the RTC Tamper interrupt.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled.
- * This parameter can be any combination of the following values:
- * @arg RTC_IT_TAMP1: Tamper A interrupt
- * @retval None
- */
-#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT(BKP->CSR, (__INTERRUPT__))
-
-/**
- * @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked.
- * This parameter can be:
- * @arg RTC_IT_TAMP1
- * @retval None
- */
-#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((BKP->CSR) & ((__INTERRUPT__))) != RESET)? SET : RESET)
-
-/**
- * @brief Get the selected RTC Tamper's flag status.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
- * This parameter can be:
- * @arg RTC_FLAG_TAMP1F
- * @retval None
- */
-#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) ((((BKP->CSR) & (__FLAG__)) != RESET)? SET : RESET)
-
-/**
- * @brief Get the selected RTC Tamper's flag status.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked.
- * This parameter can be:
- * @arg RTC_IT_TAMP1
- * @retval None
- */
-#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) ((((BKP->CSR) & (BKP_CSR_TEF)) != RESET)? SET : RESET)
-
-/**
- * @brief Clear the RTC Tamper's pending flags.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
- * This parameter can be:
- * @arg RTC_FLAG_TAMP1F
- * @retval None
- */
-#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) SET_BIT(BKP->CSR, BKP_CSR_CTE | BKP_CSR_CTI)
-
-/**
- * @brief Enable the RTC Second interrupt.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled
- * This parameter can be any combination of the following values:
- * @arg RTC_IT_SEC: Second A interrupt
- * @retval None
- */
-#define __HAL_RTC_SECOND_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
-
-/**
- * @brief Disable the RTC Second interrupt.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC Second interrupt sources to be disabled.
- * This parameter can be any combination of the following values:
- * @arg RTC_IT_SEC: Second A interrupt
- * @retval None
- */
-#define __HAL_RTC_SECOND_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
-
-/**
- * @brief Check whether the specified RTC Second interrupt has occurred or not.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled or disabled.
- * This parameter can be:
- * @arg RTC_IT_SEC: Second A interrupt
- * @retval None
- */
-#define __HAL_RTC_SECOND_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__)))) != RESET)? SET : RESET)
-
-/**
- * @brief Get the selected RTC Second's flag status.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled.
- * This parameter can be:
- * @arg RTC_FLAG_SEC
- * @retval None
- */
-#define __HAL_RTC_SECOND_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET)
-
-/**
- * @brief Clear the RTC Second's pending flags.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled.
- * This parameter can be:
- * @arg RTC_FLAG_SEC
- * @retval None
- */
-#define __HAL_RTC_SECOND_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) = ~(__FLAG__)
-
-/**
- * @brief Enable the RTC Overflow interrupt.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled
- * This parameter can be any combination of the following values:
- * @arg RTC_IT_OW: Overflow A interrupt
- * @retval None
- */
-#define __HAL_RTC_OVERFLOW_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
-
-/**
- * @brief Disable the RTC Overflow interrupt.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be disabled.
- * This parameter can be any combination of the following values:
- * @arg RTC_IT_OW: Overflow A interrupt
- * @retval None
- */
-#define __HAL_RTC_OVERFLOW_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
-
-/**
- * @brief Check whether the specified RTC Overflow interrupt has occurred or not.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled or disabled.
- * This parameter can be:
- * @arg RTC_IT_OW: Overflow A interrupt
- * @retval None
- */
-#define __HAL_RTC_OVERFLOW_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__))) ) != RESET)? SET : RESET)
-
-/**
- * @brief Get the selected RTC Overflow's flag status.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled.
- * This parameter can be:
- * @arg RTC_FLAG_OW
- * @retval None
- */
-#define __HAL_RTC_OVERFLOW_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET)
-
-/**
- * @brief Clear the RTC Overflow's pending flags.
- * @param __HANDLE__: specifies the RTC handle.
- * @param __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled.
- * This parameter can be:
- * @arg RTC_FLAG_OW
- * @retval None
- */
-#define __HAL_RTC_OVERFLOW_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) = ~(__FLAG__)
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup RTCEx_Exported_Functions
- * @{
- */
-
-/* RTC Tamper functions *****************************************/
-/** @addtogroup RTCEx_Exported_Functions_Group1
- * @{
- */
-HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
-HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
-HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
-void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc);
-void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-
-/**
- * @}
- */
-
-/* RTC Second functions *****************************************/
-/** @addtogroup RTCEx_Exported_Functions_Group2
- * @{
- */
-HAL_StatusTypeDef HAL_RTCEx_SetSecond_IT(RTC_HandleTypeDef *hrtc);
-HAL_StatusTypeDef HAL_RTCEx_DeactivateSecond(RTC_HandleTypeDef *hrtc);
-void HAL_RTCEx_RTCIRQHandler(RTC_HandleTypeDef* hrtc);
-void HAL_RTCEx_RTCEventCallback(RTC_HandleTypeDef *hrtc);
-void HAL_RTCEx_RTCEventErrorCallback(RTC_HandleTypeDef *hrtc);
-
-/**
- * @}
- */
-
-/* Extension Control functions ************************************************/
-/** @addtogroup RTCEx_Exported_Functions_Group3
- * @{
- */
-void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
-uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
-
-HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F1xx_HAL_RTC_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
projects / qmk_firmware.git / blobdiff