+++ /dev/null
-/**
- ******************************************************************************
- * @file stm32f1xx_hal_gpio.h
- * @author MCD Application Team
- * @version V1.0.0
- * @date 15-December-2014
- * @brief Header file of GPIO HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_GPIO_H
-#define __STM32F1xx_HAL_GPIO_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup GPIO
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup GPIO_Exported_Types GPIO Exported Types
- * @{
- */
-
-/**
- * @brief GPIO Init structure definition
- */
-typedef struct
-{
- uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
- This parameter can be any value of @ref GPIO_pins_define */
-
- uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
- This parameter can be a value of @ref GPIO_mode_define */
-
- uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
- This parameter can be a value of @ref GPIO_pull_define */
-
- uint32_t Speed; /*!< Specifies the speed for the selected pins.
- This parameter can be a value of @ref GPIO_speed_define */
-}GPIO_InitTypeDef;
-
-/**
- * @brief GPIO Bit SET and Bit RESET enumeration
- */
-typedef enum
-{
- GPIO_PIN_RESET = 0,
- GPIO_PIN_SET
-}GPIO_PinState;
-
-/**
- * @}
- */
-
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
- * @{
- */
-
-/** @defgroup GPIO_pins_define GPIO pins define
- * @{
- */
-#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
-#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
-#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
-#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
-#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
-#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
-#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
-#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
-#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
-#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
-#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
-#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
-#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
-#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
-#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
-#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
-#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
-
-#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */
-/**
- * @}
- */
-
-
-/** @defgroup GPIO_mode_define GPIO mode define
- * @brief GPIO Configuration Mode
- * Elements values convention: 0xX0yz00YZ
- * - X : GPIO mode or EXTI Mode
- * - y : External IT or Event trigger detection
- * - z : IO configuration on External IT or Event
- * - Y : Output type (Push Pull or Open Drain)
- * - Z : IO Direction mode (Input, Output, Alternate or Analog)
- * @{
- */
-#define GPIO_MODE_INPUT ((uint32_t)0x00000000) /*!< Input Floating Mode */
-#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001) /*!< Output Push Pull Mode */
-#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011) /*!< Output Open Drain Mode */
-#define GPIO_MODE_AF_PP ((uint32_t)0x00000002) /*!< Alternate Function Push Pull Mode */
-#define GPIO_MODE_AF_OD ((uint32_t)0x00000012) /*!< Alternate Function Open Drain Mode */
-#define GPIO_MODE_AF_INPUT GPIO_MODE_INPUT /*!< Alternate Function Input Mode */
-
-#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */
-
-#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000) /*!< External Interrupt Mode with Rising edge trigger detection */
-#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000) /*!< External Interrupt Mode with Falling edge trigger detection */
-#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
-
-#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000) /*!< External Event Mode with Rising edge trigger detection */
-#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000) /*!< External Event Mode with Falling edge trigger detection */
-#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000) /*!< External Event Mode with Rising/Falling edge trigger detection */
-
-/**
- * @}
- */
-
-
-/** @defgroup GPIO_speed_define GPIO speed define
- * @brief GPIO Output Maximum frequency
- * @{
- */
-#define GPIO_SPEED_LOW (GPIO_CRL_MODE0_1) /*!< Low speed */
-#define GPIO_SPEED_MEDIUM (GPIO_CRL_MODE0_0) /*!< Medium speed */
-#define GPIO_SPEED_HIGH (GPIO_CRL_MODE0) /*!< High speed */
-
-/**
- * @}
- */
-
-
- /** @defgroup GPIO_pull_define GPIO pull define
- * @brief GPIO Pull-Up or Pull-Down Activation
- * @{
- */
-#define GPIO_NOPULL ((uint32_t)0x00000000) /*!< No Pull-up or Pull-down activation */
-#define GPIO_PULLUP ((uint32_t)0x00000001) /*!< Pull-up activation */
-#define GPIO_PULLDOWN ((uint32_t)0x00000002) /*!< Pull-down activation */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-/* Private macros --------------------------------------------------------*/
-/** @addtogroup GPIO_Private_Macros
- * @{
- */
-
-#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
-
-#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK ) != (uint32_t)0x00)
-
-#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
- ((PULL) == GPIO_PULLDOWN))
-
-#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || \
- ((SPEED) == GPIO_SPEED_MEDIUM) || ((SPEED) == GPIO_SPEED_HIGH))
-
-#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
- ((MODE) == GPIO_MODE_OUTPUT_PP) ||\
- ((MODE) == GPIO_MODE_OUTPUT_OD) ||\
- ((MODE) == GPIO_MODE_AF_PP) ||\
- ((MODE) == GPIO_MODE_AF_OD) ||\
- ((MODE) == GPIO_MODE_IT_RISING) ||\
- ((MODE) == GPIO_MODE_IT_FALLING) ||\
- ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
- ((MODE) == GPIO_MODE_EVT_RISING) ||\
- ((MODE) == GPIO_MODE_EVT_FALLING) ||\
- ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
- ((MODE) == GPIO_MODE_ANALOG))
-
-/**
- * @}
- */
-
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
- * @{
- */
-
-/**
- * @brief Checks whether the specified EXTI line flag is set or not.
- * @param __EXTI_LINE__: specifies the EXTI line flag to check.
- * This parameter can be GPIO_PIN_x where x can be(0..15)
- * @retval The new state of __EXTI_LINE__ (SET or RESET).
- */
-#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
-
-/**
- * @brief Clears the EXTI's line pending flags.
- * @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
- * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
- * @retval None
- */
-#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
-
-/**
- * @brief Checks whether the specified EXTI line is asserted or not.
- * @param __EXTI_LINE__: specifies the EXTI line to check.
- * This parameter can be GPIO_PIN_x where x can be(0..15)
- * @retval The new state of __EXTI_LINE__ (SET or RESET).
- */
-#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
-
-/**
- * @brief Clears the EXTI's line pending bits.
- * @param __EXTI_LINE__: specifies the EXTI lines to clear.
- * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
- * @retval None
- */
-#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
-
-/**
- * @brief Generates a Software interrupt on selected EXTI line.
- * @param __EXTI_LINE__: specifies the EXTI line to check.
- * This parameter can be GPIO_PIN_x where x can be(0..15)
- * @retval None
- */
-#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
-
-/* Include GPIO HAL Extension module */
-#include "stm32f1xx_hal_gpio_ex.h"
-
-/**
- * @}
- */
-
-
-
-/* Exported functions --------------------------------------------------------*/
-/* Initialization and de-initialization functions *******************************/
-/** @addtogroup GPIO_Exported_Functions
- * @{
- */
-
-/** @addtogroup GPIO_Exported_Functions_Group1
- * @{
- */
-void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
-void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
-/**
- * @}
- */
-
-/* IO operation functions *******************************************************/
-/** @addtogroup GPIO_Exported_Functions_Group2
- * @{
- */
-GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
-void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
-void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F1xx_HAL_GPIO_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
projects / qmk_firmware.git / blobdiff