+++ /dev/null
-/**
- ******************************************************************************
- * @file stm32f0xx.h
- * @author MCD Application Team
- * @version V2.2.0
- * @date 05-December-2014
- * @brief CMSIS STM32F0xx Device Peripheral Access Layer Header File.
- *
- * The file is the unique include file that the application programmer
- * is using in the C source code, usually in main.c. This file contains:
- * - Configuration section that allows to select:
- * - The STM32F0xx device used in the target application
- * - To use or not the peripheral\92s drivers in application code(i.e.
- * code will be based on direct access to peripheral\92s registers
- * rather than drivers API), this option is controlled by
- * "#define USE_HAL_DRIVER"
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/** @addtogroup CMSIS
- * @{
- */
-
-/** @addtogroup stm32f0xx
- * @{
- */
-
-#ifndef __STM32F0xx_H
-#define __STM32F0xx_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif /* __cplusplus */
-
-/** @addtogroup Library_configuration_section
- * @{
- */
-
-/* Uncomment the line below according to the target STM32 device used in your
- application
- */
-
-#if !defined (STM32F030x6) && !defined (STM32F030x8) && \
- !defined (STM32F031x6) && !defined (STM32F038xx) && \
- !defined (STM32F042x6) && !defined (STM32F048xx) && !defined (STM32F070x6) && \
- !defined (STM32F051x8) && !defined (STM32F058xx) && \
- !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && !defined (STM32F070xB) && \
- !defined (STM32F091xC) && !defined (STM32F098xx) && !defined (STM32F030xC)
- /* #define STM32F030x6 */ /*!< STM32F030x4, STM32F030x6 Devices (STM32F030xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
- /* #define STM32F030x8 */ /*!< STM32F030x8 Devices (STM32F030xx microcontrollers where the Flash memory is 64 Kbytes) */
- /* #define STM32F031x6 */ /*!< STM32F031x4, STM32F031x6 Devices (STM32F031xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
- /* #define STM32F038xx */ /*!< STM32F038xx Devices (STM32F038xx microcontrollers where the Flash memory is 32 Kbytes) */
- /* #define STM32F042x6 */ /*!< STM32F042x4, STM32F042x6 Devices (STM32F042xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
- /* #define STM32F048x6 */ /*!< STM32F048xx Devices (STM32F042xx microcontrollers where the Flash memory is 32 Kbytes) */
- /* #define STM32F051x8 */ /*!< STM32F051x4, STM32F051x6, STM32F051x8 Devices (STM32F051xx microcontrollers where the Flash memory ranges between 16 and 64 Kbytes) */
- /* #define STM32F058xx */ /*!< STM32F058xx Devices (STM32F058xx microcontrollers where the Flash memory is 64 Kbytes) */
- /* #define STM32F070x6 */ /*!< STM32F070x6 Devices (STM32F070x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
- /* #define STM32F070xB */ /*!< STM32F070xB Devices (STM32F070xB microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
- /* #define STM32F071xB */ /*!< STM32F071x8, STM32F071xB Devices (STM32F071xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
- /* #define STM32F072xB */ /*!< STM32F072x8, STM32F072xB Devices (STM32F072xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
- /* #define STM32F078xx */ /*!< STM32F078xx Devices (STM32F078xx microcontrollers where the Flash memory is 128 Kbytes) */
- /* #define STM32F030xC */ /*!< STM32F030xC Devices (STM32F030xC microcontrollers where the Flash memory is 256 Kbytes) */
-#define STM32F091xC /*!< STM32F091xC Devices (STM32F091xx microcontrollers where the Flash memory is 256 Kbytes) */
- /* #define STM32F098xx */ /*!< STM32F098xx Devices (STM32F098xx microcontrollers where the Flash memory is 256 Kbytes) */
-#endif
-
-/* Tip: To avoid modifying this file each time you need to switch between these
- devices, you can define the device in your toolchain compiler preprocessor.
- */
-#if !defined (USE_HAL_DRIVER)
-/**
- * @brief Comment the line below if you will not use the peripherals drivers.
- In this case, these drivers will not be included and the application code will
- be based on direct access to peripherals registers
- */
-#define USE_HAL_DRIVER
-#endif /* USE_HAL_DRIVER */
-
-/**
- * @brief CMSIS Device version number V2.2.0
- */
-#define __STM32F0xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
-#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
-#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
-#define __STM32F0xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
-#define __STM32F0xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\
- |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
- |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
- |(__CMSIS_DEVICE_HAL_VERSION_RC))
-
-/**
- * @}
- */
-
-/** @addtogroup Device_Included
- * @{
- */
-
-#if defined(STM32F030x6)
- #include "stm32f030x6.h"
-#elif defined(STM32F030x8)
- #include "stm32f030x8.h"
-#elif defined(STM32F031x6)
- #include "stm32f031x6.h"
-#elif defined(STM32F038xx)
- #include "stm32f038xx.h"
-#elif defined(STM32F042x6)
- #include "stm32f042x6.h"
-#elif defined(STM32F048xx)
- #include "stm32f048xx.h"
-#elif defined(STM32F051x8)
- #include "stm32f051x8.h"
-#elif defined(STM32F058xx)
- #include "stm32f058xx.h"
-#elif defined(STM32F070x6)
- #include "stm32f070x6.h"
-#elif defined(STM32F070xB)
- #include "stm32f070xb.h"
-#elif defined(STM32F071xB)
- #include "stm32f071xb.h"
-#elif defined(STM32F072xB)
- #include "stm32f072xb.h"
-#elif defined(STM32F078xx)
- #include "stm32f078xx.h"
-#elif defined(STM32F091xC)
- #include "stm32f091xc.h"
-#elif defined(STM32F098xx)
- #include "stm32f098xx.h"
-#elif defined(STM32F030xC)
- #include "stm32f030xc.h"
-#else
- #error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)"
-#endif
-
-/**
- * @}
- */
-
-/** @addtogroup Exported_types
- * @{
- */
-typedef enum
-{
- RESET = 0,
- SET = !RESET
-} FlagStatus, ITStatus;
-
-typedef enum
-{
- DISABLE = 0,
- ENABLE = !DISABLE
-} FunctionalState;
-#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
-
-typedef enum
-{
- ERROR = 0,
- SUCCESS = !ERROR
-} ErrorStatus;
-
-/**
- * @}
- */
-
-
-/** @addtogroup Exported_macros
- * @{
- */
-#define SET_BIT(REG, BIT) ((REG) |= (BIT))
-
-#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
-
-#define READ_BIT(REG, BIT) ((REG) & (BIT))
-
-#define CLEAR_REG(REG) ((REG) = (0x0))
-
-#define WRITE_REG(REG, VAL) ((REG) = (VAL))
-
-#define READ_REG(REG) ((REG))
-
-#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
-
-
-/**
- * @}
- */
-
-#if defined (USE_HAL_DRIVER)
- #include "stm32f0xx_hal.h"
-#endif /* USE_HAL_DRIVER */
-
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif /* __STM32F0xx_H */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
projects / qmk_firmware.git / blobdiff