--- /dev/null
+/*
+ * @brief LPC43xx System Initialization
+ *
+ * @note
+ * Copyright(C) NXP Semiconductors, 2012
+ * All rights reserved.
+ *
+ * @par
+ * Software that is described herein is for illustrative purposes only
+ * which provides customers with programming information regarding the
+ * LPC products. This software is supplied "AS IS" without any warranties of
+ * any kind, and NXP Semiconductors and its licensor disclaim any and
+ * all warranties, express or implied, including all implied warranties of
+ * merchantability, fitness for a particular purpose and non-infringement of
+ * intellectual property rights. NXP Semiconductors assumes no responsibility
+ * or liability for the use of the software, conveys no license or rights under any
+ * patent, copyright, mask work right, or any other intellectual property rights in
+ * or to any products. NXP Semiconductors reserves the right to make changes
+ * in the software without notification. NXP Semiconductors also makes no
+ * representation or warranty that such application will be suitable for the
+ * specified use without further testing or modification.
+ *
+ * @par
+ * Permission to use, copy, modify, and distribute this software and its
+ * documentation is hereby granted, under NXP Semiconductors' and its
+ * licensor's relevant copyrights in the software, without fee, provided that it
+ * is used in conjunction with NXP Semiconductors microcontrollers. This
+ * copyright, permission, and disclaimer notice must appear in all copies of
+ * this code.
+ *
+ * Modified by Micromint USA <support@micromint.com>
+ */
+#include "LPC43xx.h"
+
+#define COUNT_OF(a) (sizeof(a)/sizeof(a[0]))
+
+/* Clock variables */
+#if (CLOCK_SETUP)
+uint32_t SystemCoreClock = MAX_CLOCK_FREQ;
+#else
+uint32_t SystemCoreClock = CRYSTAL_MAIN_FREQ_IN;
+#endif
+
+#if !defined(CORE_M0)
+/* SCU pin definitions for pin muxing */
+typedef struct {
+ __IO uint32_t *reg; /* SCU register address */
+ uint16_t mode; /* SCU pin mode and function */
+} PINMUX_GRP_T;
+
+/* Pins to initialize before clocks are configured */
+static const PINMUX_GRP_T pre_clock_mux[] = {
+ /* SPIFI pins */
+ {SCU_REG(0x3, 3), (SCU_PINIO_FAST | 0x3)}, /* P3_3 SPIFI CLK */
+ {SCU_REG(0x3, 4), (SCU_PINIO_FAST | 0x3)}, /* P3_4 SPIFI D3 */
+ {SCU_REG(0x3, 5), (SCU_PINIO_FAST | 0x3)}, /* P3_5 SPIFI D2 */
+ {SCU_REG(0x3, 6), (SCU_PINIO_FAST | 0x3)}, /* P3_6 SPIFI D1 */
+ {SCU_REG(0x3, 7), (SCU_PINIO_FAST | 0x3)}, /* P3_7 SPIFI D0 */
+ {SCU_REG(0x3, 8), (SCU_PINIO_FAST | 0x3)} /* P3_8 SPIFI CS/SSEL */
+};
+
+/* Pins to initialize after clocks are configured */
+static const PINMUX_GRP_T post_clock_mux[] = {
+ /* Boot pins */
+ {SCU_REG(0x1, 1), (SCU_PINIO_FAST | 0x0)}, /* P1_1 BOOT0 */
+ {SCU_REG(0x1, 2), (SCU_PINIO_FAST | 0x0)}, /* P1_2 BOOT1 */
+ {SCU_REG(0x2, 8), (SCU_PINIO_FAST | 0x0)}, /* P2_8 BOOT2 */
+ {SCU_REG(0x2, 9), (SCU_PINIO_FAST | 0x0)}, /* P2_9 BOOT3 */
+ /* Micromint Bambino 200/210 */
+ {SCU_REG(0x6, 11), (SCU_PINIO_FAST | 0x0)}, /* P6_11 LED1 */
+ {SCU_REG(0x2, 5), (SCU_PINIO_FAST | 0x0)}, /* P2_5 LED2 */
+ {SCU_REG(0x2, 7), (SCU_PINIO_FAST | 0x0)}, /* P2_7 BTN1 */
+ /* Micromint Bambino 210 */
+ {SCU_REG(0x6, 1), (SCU_PINIO_FAST | 0x0)}, /* P6_1 LED3 */
+ {SCU_REG(0x6, 2), (SCU_PINIO_FAST | 0x0)}, /* P6_2 LED4 */
+};
+
+#if (CLOCK_SETUP)
+/* Structure for initial base clock states */
+struct CLK_BASE_STATES {
+ CGU_BASE_CLK_T clk; /* Base clock */
+ CGU_CLKIN_T clkin; /* Base clock source */
+ uint8_t powerdn; /* Set to 1 if base clock is initially powered down */
+};
+
+/* Initial base clock states are mostly on */
+static const struct CLK_BASE_STATES clock_states[] = {
+ {CLK_BASE_SAFE, CLKIN_IRC, 0},
+ {CLK_BASE_APB1, CLKIN_MAINPLL, 0},
+ {CLK_BASE_APB3, CLKIN_MAINPLL, 0},
+ {CLK_BASE_USB0, CLKIN_USBPLL, 1},
+ {CLK_BASE_PERIPH, CLKIN_MAINPLL, 0},
+ {CLK_BASE_SPI, CLKIN_MAINPLL, 0},
+ {CLK_BASE_PHY_TX, CLKIN_ENET_TX, 0},
+#if defined(USE_RMII)
+ {CLK_BASE_PHY_RX, CLKIN_ENET_TX, 0},
+#else
+ {CLK_BASE_PHY_RX, CLKIN_ENET_RX, 0},
+#endif
+ {CLK_BASE_SDIO, CLKIN_MAINPLL, 0},
+ {CLK_BASE_SSP0, CLKIN_IDIVC, 0},
+ {CLK_BASE_SSP1, CLKIN_IDIVC, 0},
+ {CLK_BASE_UART0, CLKIN_MAINPLL, 0},
+ {CLK_BASE_UART1, CLKIN_MAINPLL, 0},
+ {CLK_BASE_UART2, CLKIN_MAINPLL, 0},
+ {CLK_BASE_UART3, CLKIN_MAINPLL, 0},
+ {CLK_BASE_OUT, CLKINPUT_PD, 0},
+ {CLK_BASE_APLL, CLKINPUT_PD, 0},
+ {CLK_BASE_CGU_OUT0, CLKINPUT_PD, 0},
+ {CLK_BASE_CGU_OUT1, CLKINPUT_PD, 0},
+
+ /* Clocks derived from dividers */
+ {CLK_BASE_LCD, CLKIN_IDIVC, 0},
+ {CLK_BASE_USB1, CLKIN_IDIVD, 1}
+};
+#endif /* defined(CLOCK_SETUP) */
+
+/* Local functions */
+static uint32_t SystemGetMainPLLHz(void);
+static void SystemSetupClock(void);
+static void SystemSetupPins(const PINMUX_GRP_T *mux, uint32_t n);
+static void SystemSetupMemory(void);
+static void WaitUs(uint32_t us);
+
+#endif /* !defined(CORE_M0) */
+
+/*
+ * SystemInit() - Initialize the system
+ */
+void SystemInit(void)
+{
+#if !defined(CORE_M0)
+
+ /* Initialize vector table in flash */
+#if defined(__ARMCC_VERSION)
+ extern void *__Vectors;
+
+ SCB->VTOR = (unsigned int) &__Vectors;
+#elif defined(__IAR_SYSTEMS_ICC__)
+ extern void *__vector_table;
+
+ SCB->VTOR = (unsigned int) &__vector_table;
+#elif defined(TOOLCHAIN_GCC_ARM)
+ extern void *__isr_vector;
+
+ SCB->VTOR = (unsigned int) &__isr_vector;
+#else /* defined(__GNUC__) and others */
+ extern void *g_pfnVectors;
+
+ SCB->VTOR = (unsigned int) &g_pfnVectors;
+#endif
+
+#if defined(__FPU_PRESENT) && __FPU_PRESENT == 1
+ /* Initialize floating point */
+ fpuInit();
+#endif
+
+ SystemSetupPins(pre_clock_mux, COUNT_OF(pre_clock_mux)); /* Configure pins */
+ SystemSetupClock(); /* Configure processor and peripheral clocks */
+ SystemSetupPins(post_clock_mux, COUNT_OF(post_clock_mux)); /* Configure pins */
+ SystemSetupMemory(); /* Configure external memory */
+#endif /* !defined(CORE_M0) */
+
+ SystemCoreClockUpdate(); /* Update SystemCoreClock variable */
+}
+
+/*
+ * SystemCoreClockUpdate() - Update SystemCoreClock variable
+ */
+void SystemCoreClockUpdate(void)
+{
+ uint32_t reg, div, rate;
+
+ /* Get main PLL rate */
+ rate = SystemGetMainPLLHz();
+
+ /* Get clock divider */
+ reg = LPC_CCU1->CLKCCU[CLK_MX_MXCORE].CFG;
+ if (((reg >> 5) & 0x7) == 0) {
+ div = 1;
+ }
+ else {
+ div = 2;
+ }
+ rate = rate / div;
+
+ SystemCoreClock = rate;
+}
+
+/* Returns the frequency of the main PLL */
+uint32_t SystemGetMainPLLHz(void)
+{
+ uint32_t PLLReg = LPC_CGU->PLL1_CTRL;
+ uint32_t freq = CRYSTAL_MAIN_FREQ_IN;
+ uint32_t msel, nsel, psel, direct, fbsel;
+ uint32_t m, n, p;
+ const uint8_t ptab[] = {1, 2, 4, 8};
+
+ msel = (PLLReg >> 16) & 0xFF;
+ nsel = (PLLReg >> 12) & 0x3;
+ psel = (PLLReg >> 8) & 0x3;
+ direct = (PLLReg >> 7) & 0x1;
+ fbsel = (PLLReg >> 6) & 0x1;
+
+ m = msel + 1;
+ n = nsel + 1;
+ p = ptab[psel];
+
+ if (direct || fbsel) {
+ return m * (freq / n);
+ }
+
+ return (m / (2 * p)) * (freq / n);
+}
+
+#if !defined(CORE_M0)
+/*
+ * SystemSetupClock() - Set processor and peripheral clocks
+ *
+ * Clock Frequency Source
+ * CLK_BASE_MX 204 MHz CLKIN_MAINPLL (CLKIN_PLL1)
+ * CLK_BASE_SPIFI 102 MHz CLKIN_IDIVE
+ * CLK_BASE_USB0 480 MHz CLKIN_USBPLL (Disabled) (CLKIN_PLL0USB)
+ * CLK_BASE_USB1 60 MHz CLKIN_IDIVE (Disabled)
+ * 120 MHz CLKIN_IDIVD (Disabled)
+ *
+ * 12 MHz CLKIN_IDIVB
+ * 12 MHz CLKIN_IDIVC
+ *
+ */
+void SystemSetupClock(void)
+{
+#if (CLOCK_SETUP)
+ uint32_t i;
+
+ /* Switch main clock to Internal RC (IRC) while setting up PLL1 */
+ LPC_CGU->BASE_CLK[CLK_BASE_MX] = (1 << 11) | (CLKIN_IRC << 24);
+ /* Set prescaler/divider on SSP1 assuming 204 MHz clock */
+ LPC_SSP1->CR1 &= ~(1 << 1);
+ LPC_SSP1->CPSR = 0x0002;
+ LPC_SSP1->CR0 = 0x00006507;
+ LPC_SSP1->CR1 |= (1 << 1);
+
+ /* Enable the oscillator and wait 100 us */
+ LPC_CGU->XTAL_OSC_CTRL = 0;
+ WaitUs(100);
+
+#if (SPIFI_INIT)
+ /* Setup SPIFI control register and no-opcode mode */
+ LPC_SPIFI->CTRL = (0x100 << 0) | (1 << 16) | (1 << 29) | (1 << 30);
+ LPC_SPIFI->IDATA = 0xA5;
+ /* Switch IDIVE clock to IRC and connect to SPIFI clock */
+ LPC_CGU->IDIV_CTRL[CLK_IDIV_E] = ((1 << 11) | (CLKIN_IRC << 24));
+ LPC_CGU->BASE_CLK[CLK_BASE_SPIFI] = ((1 << 11) | (CLKIN_IDIVE << 24));
+#endif /* SPIFI_INIT */
+
+ /* Configure PLL1 (MAINPLL) for main clock */
+ LPC_CGU->PLL1_CTRL |= 1; /* Power down PLL1 */
+
+ /* Change PLL1 to 108 Mhz (msel=9, 12 MHz*9=108 MHz) */
+ LPC_CGU->PLL1_CTRL = (1 << 7) | (0 << 8) | (1 << 11) | (0 << 12) | (8 << 16)
+ | (CLKIN_MAINPLL << 24);
+ while (!(LPC_CGU->PLL1_STAT & 1)); /* Wait for PLL1 to lock */
+ WaitUs(100);
+
+ /* Change PLL1 to 204 Mhz (msel=17, 12 MHz*17=204 MHz) */
+ LPC_CGU->PLL1_CTRL = (1 << 7) | (0 << 8) | (1 << 11) | (0 << 12) | (16 << 16)
+ | (CLKIN_MAINPLL << 24);
+ while (!(LPC_CGU->PLL1_STAT & 1)); /* Wait for PLL1 to lock */
+
+ /* Connect main clock to PLL1 */
+ LPC_CGU->BASE_CLK[CLK_BASE_MX] = (1 << 11) | (CLKIN_MAINPLL << 24);
+
+ /* Set USB PLL dividers for 480 MHz (for USB0) */
+ LPC_CGU->PLL[CGU_USB_PLL].PLL_MDIV = 0x06167FFA;
+ LPC_CGU->PLL[CGU_USB_PLL].PLL_NP_DIV = 0x00302062;
+ LPC_CGU->PLL[CGU_USB_PLL].PLL_CTRL = 0x0000081D | (CLKIN_CRYSTAL << 24);
+
+ /* Set IDIVE clock to PLL1/2 = 102 MHz */
+ LPC_CGU->IDIV_CTRL[CLK_IDIV_E] = (1 << 2) | (1 << 11) | (CLKIN_MAINPLL << 24); /* PLL1/2 */
+
+ /* Set IDIVD clock to ((USBPLL/4) / 2) = 60 MHz (for USB1) */
+ LPC_CGU->IDIV_CTRL[CLK_IDIV_A] = (3 << 2) | (1 << 11) | (CLKIN_USBPLL << 24); /* USBPLL/4 */
+ LPC_CGU->IDIV_CTRL[CLK_IDIV_D] = (1 << 2) | (1 << 11) | (CLKIN_IDIVA << 24); /* IDIVA/2 */
+
+ /* Configure remaining integer dividers */
+ LPC_CGU->IDIV_CTRL[CLK_IDIV_B] = (0 << 2) | (1 << 11) | (CLKIN_IRC << 24); /* IRC */
+ LPC_CGU->IDIV_CTRL[CLK_IDIV_C] = (1 << 2) | (1 << 11) | (CLKIN_MAINPLL << 24); /* PLL1/2 */
+
+ /* Connect base clocks */
+ for (i = 0; i < COUNT_OF(clock_states); i++) {
+ LPC_CGU->BASE_CLK[clock_states[i].clk] =
+ ( clock_states[i].powerdn << 0)
+ | (1 << 11) | (clock_states[i].clkin << 24);
+ }
+#endif /* CLOCK_SETUP */
+ /* Reset peripherals */
+ LPC_RGU->RESET_CTRL0 = 0x105F0000;
+ LPC_RGU->RESET_CTRL1 = 0x01DFF7FF;
+}
+
+/*
+ * SystemSetupPins() - Configure MCU pins
+ */
+void SystemSetupPins(const PINMUX_GRP_T *mux, uint32_t n)
+{
+ uint32_t i;
+
+ for (i = 0; i < n; i++) {
+ *(mux[i].reg) = mux[i].mode;
+ }
+}
+
+/*
+ * SystemSetupMemory() - Configure external memory
+ */
+void SystemSetupMemory(void)
+{
+#if (MEMORY_SETUP)
+ /* None required for boards without external memory */
+#endif /* MEMORY_SETUP */
+}
+
+#if defined(__FPU_PRESENT) && __FPU_PRESENT == 1
+/*
+ * fpuInit() - Early initialization of the FPU
+ */
+void fpuInit(void)
+{
+ /*
+ * from ARM TRM manual:
+ * ; CPACR is located at address 0xE000ED88
+ * LDR.W R0, =0xE000ED88
+ * ; Read CPACR
+ * LDR R1, [R0]
+ * ; Set bits 20-23 to enable CP10 and CP11 coprocessors
+ * ORR R1, R1, #(0xF << 20)
+ * ; Write back the modified value to the CPACR
+ * STR R1, [R0]
+ */
+
+ volatile uint32_t *regCpacr = (uint32_t *) LPC_CPACR;
+ volatile uint32_t *regMvfr0 = (uint32_t *) SCB_MVFR0;
+ volatile uint32_t *regMvfr1 = (uint32_t *) SCB_MVFR1;
+ volatile uint32_t Cpacr;
+ volatile uint32_t Mvfr0;
+ volatile uint32_t Mvfr1;
+ char vfpPresent = 0;
+
+ Mvfr0 = *regMvfr0;
+ Mvfr1 = *regMvfr1;
+
+ vfpPresent = ((SCB_MVFR0_RESET == Mvfr0) && (SCB_MVFR1_RESET == Mvfr1));
+
+ if (vfpPresent) {
+ Cpacr = *regCpacr;
+ Cpacr |= (0xF << 20);
+ *regCpacr = Cpacr; /* enable CP10 and CP11 for full access */
+ }
+}
+#endif /* defined(__FPU_PRESENT) && __FPU_PRESENT == 1 */
+
+/* Approximate delay function */
+#define CPU_NANOSEC(x) (((uint64_t) (x) * SystemCoreClock) / 1000000000)
+
+static void WaitUs(uint32_t us)
+{
+ volatile uint32_t cyc = us * CPU_NANOSEC(1000) / 4;
+ while (cyc--)
+ ;
+}
+
+#endif /* !defined(CORE_M0) */