Merge commit '1fe4406f374291ab2e86e95a97341fd9c475fcb8'

[qmk_firmware.git] / tmk_core / tool / mbed / mbed-sdk / libraries / mbed / targets / cmsis / TARGET_NORDIC / TARGET_MCU_NRF51822 / cmsis_nvic.c

diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_NORDIC/TARGET_MCU_NRF51822/cmsis_nvic.c b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_NORDIC/TARGET_MCU_NRF51822/cmsis_nvic.c
new file mode 100644 (file)
index 0000000..5fe8d89
--- /dev/null
+++ b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_NORDIC/TARGET_MCU_NRF51822/cmsis_nvic.c
@@ -0,0 +1,103 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2011 ARM Limited. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#include "cmsis_nvic.h"
+
+/* In the M0, there is no VTOR. In the LPC range such as the LPC11U,
+ * whilst the vector table may only be something like 48 entries (192 bytes, 0xC0), 
+ * the SYSMEMREMAP register actually remaps the memory from 0x10000000-0x100001FF 
+ * to adress 0x0-0x1FF. In this case, RAM can be addressed at both 0x10000000 and 0x0
+ * 
+ * If we just copy the vectors to RAM and switch the SYSMEMMAP, any accesses to FLASH
+ * above the vector table before 0x200 will actually go to RAM. So we need to provide 
+ * a solution where the compiler gets the right results based on the memory map
+ *
+ * Option 1 - We allocate and copy 0x200 of RAM rather than just the table
+ *  - const data and instructions before 0x200 will be copied to and fetched/exec from RAM
+ *  - RAM overhead: 0x200 - 0xC0 = 320 bytes, FLASH overhead: 0
+ * 
+ * Option 2 - We pad the flash to 0x200 to ensure the compiler doesn't allocate anything there  
+ *  - No flash accesses will go to ram, as there will be nothing there
+ *  - RAM only needs to be allocated for the vectors, as all other ram addresses are normal
+ *  - RAM overhead: 0, FLASH overhead: 320 bytes
+ *
+ * Option 2 is the one to go for, as RAM is the most valuable resource
+ */
+
+
+#define NVIC_RAM_VECTOR_ADDRESS   (0x10000000)  // Location of vectors in RAM
+#define NVIC_FLASH_VECTOR_ADDRESS (0x0)       // Initial vector position in flash
+/*
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) {
+    uint32_t *vectors = (uint32_t*)SCB->VTOR;
+    uint32_t i;
+
+    // Copy and switch to dynamic vectors if the first time called
+    if (SCB->VTOR == NVIC_FLASH_VECTOR_ADDRESS) {
+        uint32_t *old_vectors = vectors;
+        vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS;
+        for (i=0; i<NVIC_NUM_VECTORS; i++) {
+            vectors[i] = old_vectors[i];
+        }
+        SCB->VTOR = (uint32_t)NVIC_RAM_VECTOR_ADDRESS;
+    }
+    vectors[IRQn + 16] = vector;
+}
+
+uint32_t NVIC_GetVector(IRQn_Type IRQn) {
+    uint32_t *vectors = (uint32_t*)SCB->VTOR;
+    return vectors[IRQn + 16];
+}*/
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector) {
+   // int i;
+    // Space for dynamic vectors, initialised to allocate in R/W
+    static volatile uint32_t* vectors = (uint32_t*)NVIC_RAM_VECTOR_ADDRESS;
+    /*
+    // Copy and switch to dynamic vectors if first time called
+    if((LPC_SYSCON->SYSMEMREMAP & 0x3) != 0x1) {     
+      uint32_t *old_vectors = (uint32_t *)0;         // FLASH vectors are at 0x0
+      for(i = 0; i < NVIC_NUM_VECTORS; i++) {    
+            vectors[i] = old_vectors[i];
+        }
+        LPC_SYSCON->SYSMEMREMAP = 0x1; // Remaps 0x0-0x1FF FLASH block to RAM block
+    }*/
+
+    // Set the vector 
+    vectors[IRQn + 16] = vector; 
+}
+
+uint32_t NVIC_GetVector(IRQn_Type IRQn) {
+    // We can always read vectors at 0x0, as the addresses are remapped
+    uint32_t *vectors = (uint32_t*)0; 
+
+    // Return the vector
+    return vectors[IRQn + 16];
+}