+++ /dev/null
-/**************************************************
- *
- * Copyright 2012 IAR Systems. All rights reserved.
- *
- * $Revision: 16 $
- *
- **************************************************/
-
-;
-; The modules in this file are included in the libraries, and may be replaced
-; by any user-defined modules that define the PUBLIC symbol _program_start or
-; a user defined start symbol.
-; To override the cstartup defined in the library, simply add your modified
-; version to the workbench project.
-;
-; The vector table is normally located at address 0.
-; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
-; The name "__vector_table" has special meaning for C-SPY:
-; it is where the SP start value is found, and the NVIC vector
-; table register (VTOR) is initialized to this address if != 0.
-;
-; Cortex-M version
-;
-
- MODULE ?cstartup
-
- ;; Forward declaration of sections.
- SECTION CSTACK:DATA:NOROOT(3)
-
- SECTION .intvec:CODE:ROOT(2)
-
- EXTERN __iar_program_start
- EXTERN SystemInit
- PUBLIC __vector_table
-
- DATA
-__vector_table
- DCD sfe(CSTACK) ; Top of Stack
- DCD Reset_Handler ; Reset Handler
- DCD NMI_Handler ; NMI Handler
- DCD HardFault_Handler ; Hard Fault Handler
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD SVC_Handler ; SVCall Handler
- DCD 0 ; Reserved
- DCD 0 ; Reserved
- DCD PendSV_Handler ; PendSV Handler
- DCD SysTick_Handler ; SysTick Handler
- ; External Interrupts
- DCD DMA0_IRQHandler ; 0: DMA Channel 0 transfer complete intertrupt
- DCD DMA1_IRQHandler ; 1: DMA Channel 1 transfer complete intertrupt
- DCD DMA2_IRQHandler ; 2: DMA Channel 2 transfer complete intertrupt
- DCD DMA3_IRQHandler ; 3: DMA Channel 3 transfer complete intertrupt
- DCD 0 ; 4: Reserved
- DCD FTFA_IRQHandler ; 5: FTFA
- DCD LVD_LVW_IRQHandler ; 6: Low-voltage detect, low-voltage warning
- DCD LLW_IRQHandler ; 7: Low Leakage Wakeup
- DCD I2C0_IRQHandler ; 8: IIC 0 interrupt
- DCD 0 ; 9: Reserved
- DCD SPI0_IRQHandler ;10: SPI0 intertrupt
- DCD 0 ;11: Reserved
- DCD UART0_IRQHandler ;12: UART 0 status and error intertrupt
- DCD 0 ;13: Reserved
- DCD 0 ;14: Reserved
- DCD ADC0_IRQHandler ;15: ADC 0 interrupt
- DCD CMP0_IRQHandler ;16: CMP 0 interrupt
- DCD TPM0_IRQHandler ;17: TPM 0 interrupt
- DCD TPM1_IRQHandler ;18: TPM 1 interrupt
- DCD 0 ;19: Reserved
- DCD RTC_IRQHandler ;20: RTC interrupt
- DCD RTC_Seconds_IRQHandler ;21: RTC Seconds interrupt
- DCD PIT_IRQHandler ;22: PIT Single interrupt vector for all channels
- DCD 0 ;23: Reserved
- DCD 0 ;24: Reserved
- DCD DAC0_IRQHandler ;25: UART 0 status intertrupt
- DCD TSI0_IRQHandler ;26: TSI 0 interrupt
- DCD MCG_IRQHandler ;27: MCG intertrupt
- DCD LPTimer_IRQHandler ;28: LPTimer interrupt
- DCD 0 ;29: Reserved
- DCD PORTA_IRQHandler ;30: PORT A interrupt
- DCD PORTB_IRQHandler ;31: PORT B interrupt
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;;Flash Configuration
-;;16-byte flash configuration field that stores default protection settings (loaded on reset)
-;;and security information that allows the MCU to restrict acces to the FTFL module.
-
-BackDoorK0 EQU 0xFF
-BackDoorK1 EQU 0xFF
-BackDoorK2 EQU 0xFF
-BackDoorK3 EQU 0xFF
-BackDoorK4 EQU 0xFF
-BackDoorK5 EQU 0xFF
-BackDoorK6 EQU 0xFF
-BackDoorK7 EQU 0xFF
-
-nFPROT0 EQU 0x00
-FPROT0 EQU nFPROT0^0xFF
-
-nFPROT1 EQU 0x00
-FPROT1 EQU nFPROT1^0xFF
-
-nFPROT2 EQU 0x00
-FPROT2 EQU nFPROT2^0xFF
-
-nFPROT3 EQU 0x00
-FPROT3 EQU nFPROT3^0xFF
-
-FOPT EQU 0xFF
-
-FSEC EQU 0xFE
- SECTION FlashConfig:CONST:REORDER:ROOT(2)
-Config:
- DATA
- DCB BackDoorK0, BackDoorK1, BackDoorK2, BackDoorK3
- DCB BackDoorK4, BackDoorK5, BackDoorK6, BackDoorK7
- DCB FPROT0, FPROT1, FPROT2, FPROT3
- DCB FSEC, FOPT, 0xFF, 0xFF
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-;;
-;; Default interrupt handlers.
-;;
- THUMB
- PUBWEAK Reset_Handler
- SECTION .text:CODE:NOROOT:REORDER(2)
-Reset_Handler
-
- LDR R0, =SystemInit
- BLX R0
- LDR R0, =__iar_program_start
- BX R0
-
- PUBWEAK NMI_Handler
- PUBWEAK HardFault_Handler
- PUBWEAK SVC_Handler
- PUBWEAK PendSV_Handler
- PUBWEAK SysTick_Handler
- PUBWEAK DMA0_IRQHandler
- PUBWEAK DMA1_IRQHandler
- PUBWEAK DMA2_IRQHandler
- PUBWEAK DMA3_IRQHandler
- PUBWEAK FTFA_IRQHandler
- PUBWEAK LVD_LVW_IRQHandler
- PUBWEAK LLW_IRQHandler
- PUBWEAK I2C0_IRQHandler
- PUBWEAK SPI0_IRQHandler
- PUBWEAK UART0_IRQHandler
- PUBWEAK ADC0_IRQHandler
- PUBWEAK CMP0_IRQHandler
- PUBWEAK TPM0_IRQHandler
- PUBWEAK TPM1_IRQHandler
- PUBWEAK RTC_IRQHandler
- PUBWEAK RTC_Seconds_IRQHandler
- PUBWEAK PIT_IRQHandler
- PUBWEAK DAC0_IRQHandler
- PUBWEAK TSI0_IRQHandler
- PUBWEAK MCG_IRQHandler
- PUBWEAK LPTimer_IRQHandler
- PUBWEAK PORTA_IRQHandler
- PUBWEAK PORTB_IRQHandler
-
- SECTION .text:CODE:REORDER:NOROOT(1)
- THUMB
-NMI_Handler
-HardFault_Handler
-SVC_Handler
-PendSV_Handler
-SysTick_Handler
-DMA0_IRQHandler
-DMA1_IRQHandler
-DMA2_IRQHandler
-DMA3_IRQHandler
-FTFA_IRQHandler
-LVD_LVW_IRQHandler
-LLW_IRQHandler
-I2C0_IRQHandler
-SPI0_IRQHandler
-UART0_IRQHandler
-ADC0_IRQHandler
-CMP0_IRQHandler
-TPM0_IRQHandler
-TPM1_IRQHandler
-RTC_IRQHandler
-RTC_Seconds_IRQHandler
-PIT_IRQHandler
-DAC0_IRQHandler
-TSI0_IRQHandler
-MCG_IRQHandler
-LPTimer_IRQHandler
-PORTA_IRQHandler
-PORTB_IRQHandler
-Default_Handler
-
- B Default_Handler
- END
projects / qmk_firmware.git / blobdiff