Cleans up quantum/keymap situation, removes extra lufa folders (#416)

[qmk_firmware.git] / tmk_core / tool / mbed / mbed-sdk / libraries / mbed / api / BusInOut.h

diff --git a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/api/BusInOut.h b/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/api/BusInOut.h
deleted file mode 100644 (file)
index 54328fb..0000000
--- a/tmk_core/tool/mbed/mbed-sdk/libraries/mbed/api/BusInOut.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_BUSINOUT_H
-#define MBED_BUSINOUT_H
-
-#include "DigitalInOut.h"
-
-namespace mbed {
-
-/** A digital input output bus, used for setting the state of a collection of pins
- */
-class BusInOut {
-
-public:
-
-    /** Create an BusInOut, connected to the specified pins
-     *
-     *  @param p<n> DigitalInOut pin to connect to bus bit p<n> (p5-p30, NC)
-     *
-     *  @note
-     *  It is only required to specify as many pin variables as is required
-     *  for the bus; the rest will default to NC (not connected)
-     */
-    BusInOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
-             PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
-             PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
-             PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
-
-    BusInOut(PinName pins[16]);
-
-    virtual ~BusInOut();
-
-    /* Group: Access Methods */
-
-    /** Write the value to the output bus
-     *
-     *  @param value An integer specifying a bit to write for every corresponding DigitalInOut pin
-     */
-    void write(int value);
-
-    /** Read the value currently output on the bus
-     *
-     *  @returns
-     *    An integer with each bit corresponding to associated DigitalInOut pin setting
-     */
-    int read();
-
-    /** Set as an output
-     */
-    void output();
-
-    /** Set as an input
-     */
-    void input();
-
-    /** Set the input pin mode
-     *
-     *  @param mode PullUp, PullDown, PullNone
-     */
-    void mode(PinMode pull);
-
-    /** Binary mask of bus pins connected to actual pins (not NC pins)
-     *  If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
-     *
-     *  @returns
-     *    Binary mask of connected pins
-     */
-    int mask() {
-        return _nc_mask;
-    }
-
-#ifdef MBED_OPERATORS
-     /** A shorthand for write()
-     */
-    BusInOut& operator= (int v);
-    BusInOut& operator= (BusInOut& rhs);
-
-    /** Access to particular bit in random-iterator fashion
-    */
-    DigitalInOut& operator[] (int index);
-
-    /** A shorthand for read()
-     */
-    operator int();
-#endif
-
-protected:
-    DigitalInOut* _pin[16];
-
-    /** Mask of bus's NC pins
-     * If bit[n] is set to 1 - pin is connected
-     * if bit[n] is cleared - pin is not connected (NC)
-     */
-    int _nc_mask;
-
-    /* disallow copy constructor and assignment operators */
-private:
-    BusInOut(const BusInOut&);
-    BusInOut & operator = (const BusInOut&);
-};
-
-} // namespace mbed
-
-#endif