+++ /dev/null
-/* Copyright (c) 2010-2011 mbed.org, MIT License
-*
-* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
-* and associated documentation files (the "Software"), to deal in the Software without
-* restriction, including without limitation the rights to use, copy, modify, merge, publish,
-* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
-* Software is furnished to do so, subject to the following conditions:
-*
-* The above copyright notice and this permission notice shall be included in all copies or
-* substantial portions of the Software.
-*
-* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
-* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
-* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-*/
-
-#if defined(TARGET_LPC1768) || defined(TARGET_LPC2368)
-
-#include "USBHAL.h"
-
-
-// Get endpoint direction
-#define IN_EP(endpoint) ((endpoint) & 1U ? true : false)
-#define OUT_EP(endpoint) ((endpoint) & 1U ? false : true)
-
-// Convert physical endpoint number to register bit
-#define EP(endpoint) (1UL<<endpoint)
-
-// Power Control for Peripherals register
-#define PCUSB (1UL<<31)
-
-// USB Clock Control register
-#define DEV_CLK_EN (1UL<<1)
-#define AHB_CLK_EN (1UL<<4)
-
-// USB Clock Status register
-#define DEV_CLK_ON (1UL<<1)
-#define AHB_CLK_ON (1UL<<4)
-
-// USB Device Interupt registers
-#define FRAME (1UL<<0)
-#define EP_FAST (1UL<<1)
-#define EP_SLOW (1UL<<2)
-#define DEV_STAT (1UL<<3)
-#define CCEMPTY (1UL<<4)
-#define CDFULL (1UL<<5)
-#define RxENDPKT (1UL<<6)
-#define TxENDPKT (1UL<<7)
-#define EP_RLZED (1UL<<8)
-#define ERR_INT (1UL<<9)
-
-// USB Control register
-#define RD_EN (1<<0)
-#define WR_EN (1<<1)
-#define LOG_ENDPOINT(endpoint) ((endpoint>>1)<<2)
-
-// USB Receive Packet Length register
-#define DV (1UL<<10)
-#define PKT_RDY (1UL<<11)
-#define PKT_LNGTH_MASK (0x3ff)
-
-// Serial Interface Engine (SIE)
-#define SIE_WRITE (0x01)
-#define SIE_READ (0x02)
-#define SIE_COMMAND (0x05)
-#define SIE_CMD_CODE(phase, data) ((phase<<8)|(data<<16))
-
-// SIE Command codes
-#define SIE_CMD_SET_ADDRESS (0xD0)
-#define SIE_CMD_CONFIGURE_DEVICE (0xD8)
-#define SIE_CMD_SET_MODE (0xF3)
-#define SIE_CMD_READ_FRAME_NUMBER (0xF5)
-#define SIE_CMD_READ_TEST_REGISTER (0xFD)
-#define SIE_CMD_SET_DEVICE_STATUS (0xFE)
-#define SIE_CMD_GET_DEVICE_STATUS (0xFE)
-#define SIE_CMD_GET_ERROR_CODE (0xFF)
-#define SIE_CMD_READ_ERROR_STATUS (0xFB)
-
-#define SIE_CMD_SELECT_ENDPOINT(endpoint) (0x00+endpoint)
-#define SIE_CMD_SELECT_ENDPOINT_CLEAR_INTERRUPT(endpoint) (0x40+endpoint)
-#define SIE_CMD_SET_ENDPOINT_STATUS(endpoint) (0x40+endpoint)
-
-#define SIE_CMD_CLEAR_BUFFER (0xF2)
-#define SIE_CMD_VALIDATE_BUFFER (0xFA)
-
-// SIE Device Status register
-#define SIE_DS_CON (1<<0)
-#define SIE_DS_CON_CH (1<<1)
-#define SIE_DS_SUS (1<<2)
-#define SIE_DS_SUS_CH (1<<3)
-#define SIE_DS_RST (1<<4)
-
-// SIE Device Set Address register
-#define SIE_DSA_DEV_EN (1<<7)
-
-// SIE Configue Device register
-#define SIE_CONF_DEVICE (1<<0)
-
-// Select Endpoint register
-#define SIE_SE_FE (1<<0)
-#define SIE_SE_ST (1<<1)
-#define SIE_SE_STP (1<<2)
-#define SIE_SE_PO (1<<3)
-#define SIE_SE_EPN (1<<4)
-#define SIE_SE_B_1_FULL (1<<5)
-#define SIE_SE_B_2_FULL (1<<6)
-
-// Set Endpoint Status command
-#define SIE_SES_ST (1<<0)
-#define SIE_SES_DA (1<<5)
-#define SIE_SES_RF_MO (1<<6)
-#define SIE_SES_CND_ST (1<<7)
-
-
-USBHAL * USBHAL::instance;
-
-static volatile int epComplete;
-static uint32_t endpointStallState;
-
-static void SIECommand(uint32_t command) {
- // The command phase of a SIE transaction
- LPC_USB->USBDevIntClr = CCEMPTY;
- LPC_USB->USBCmdCode = SIE_CMD_CODE(SIE_COMMAND, command);
- while (!(LPC_USB->USBDevIntSt & CCEMPTY));
-}
-
-static void SIEWriteData(uint8_t data) {
- // The data write phase of a SIE transaction
- LPC_USB->USBDevIntClr = CCEMPTY;
- LPC_USB->USBCmdCode = SIE_CMD_CODE(SIE_WRITE, data);
- while (!(LPC_USB->USBDevIntSt & CCEMPTY));
-}
-
-static uint8_t SIEReadData(uint32_t command) {
- // The data read phase of a SIE transaction
- LPC_USB->USBDevIntClr = CDFULL;
- LPC_USB->USBCmdCode = SIE_CMD_CODE(SIE_READ, command);
- while (!(LPC_USB->USBDevIntSt & CDFULL));
- return (uint8_t)LPC_USB->USBCmdData;
-}
-
-static void SIEsetDeviceStatus(uint8_t status) {
- // Write SIE device status register
- SIECommand(SIE_CMD_SET_DEVICE_STATUS);
- SIEWriteData(status);
-}
-
-static uint8_t SIEgetDeviceStatus(void) {
- // Read SIE device status register
- SIECommand(SIE_CMD_GET_DEVICE_STATUS);
- return SIEReadData(SIE_CMD_GET_DEVICE_STATUS);
-}
-
-void SIEsetAddress(uint8_t address) {
- // Write SIE device address register
- SIECommand(SIE_CMD_SET_ADDRESS);
- SIEWriteData((address & 0x7f) | SIE_DSA_DEV_EN);
-}
-
-static uint8_t SIEselectEndpoint(uint8_t endpoint) {
- // SIE select endpoint command
- SIECommand(SIE_CMD_SELECT_ENDPOINT(endpoint));
- return SIEReadData(SIE_CMD_SELECT_ENDPOINT(endpoint));
-}
-
-static uint8_t SIEclearBuffer(void) {
- // SIE clear buffer command
- SIECommand(SIE_CMD_CLEAR_BUFFER);
- return SIEReadData(SIE_CMD_CLEAR_BUFFER);
-}
-
-static void SIEvalidateBuffer(void) {
- // SIE validate buffer command
- SIECommand(SIE_CMD_VALIDATE_BUFFER);
-}
-
-static void SIEsetEndpointStatus(uint8_t endpoint, uint8_t status) {
- // SIE set endpoint status command
- SIECommand(SIE_CMD_SET_ENDPOINT_STATUS(endpoint));
- SIEWriteData(status);
-}
-
-static uint16_t SIEgetFrameNumber(void) __attribute__ ((unused));
-static uint16_t SIEgetFrameNumber(void) {
- // Read current frame number
- uint16_t lowByte;
- uint16_t highByte;
-
- SIECommand(SIE_CMD_READ_FRAME_NUMBER);
- lowByte = SIEReadData(SIE_CMD_READ_FRAME_NUMBER);
- highByte = SIEReadData(SIE_CMD_READ_FRAME_NUMBER);
-
- return (highByte << 8) | lowByte;
-}
-
-static void SIEconfigureDevice(void) {
- // SIE Configure device command
- SIECommand(SIE_CMD_CONFIGURE_DEVICE);
- SIEWriteData(SIE_CONF_DEVICE);
-}
-
-static void SIEunconfigureDevice(void) {
- // SIE Configure device command
- SIECommand(SIE_CMD_CONFIGURE_DEVICE);
- SIEWriteData(0);
-}
-
-static void SIEconnect(void) {
- // Connect USB device
- uint8_t status = SIEgetDeviceStatus();
- SIEsetDeviceStatus(status | SIE_DS_CON);
-}
-
-
-static void SIEdisconnect(void) {
- // Disconnect USB device
- uint8_t status = SIEgetDeviceStatus();
- SIEsetDeviceStatus(status & ~SIE_DS_CON);
-}
-
-
-static uint8_t selectEndpointClearInterrupt(uint8_t endpoint) {
- // Implemented using using EP_INT_CLR.
- LPC_USB->USBEpIntClr = EP(endpoint);
- while (!(LPC_USB->USBDevIntSt & CDFULL));
- return (uint8_t)LPC_USB->USBCmdData;
-}
-
-
-static void enableEndpointEvent(uint8_t endpoint) {
- // Enable an endpoint interrupt
- LPC_USB->USBEpIntEn |= EP(endpoint);
-}
-
-static void disableEndpointEvent(uint8_t endpoint) __attribute__ ((unused));
-static void disableEndpointEvent(uint8_t endpoint) {
- // Disable an endpoint interrupt
- LPC_USB->USBEpIntEn &= ~EP(endpoint);
-}
-
-static volatile uint32_t __attribute__((used)) dummyRead;
-uint32_t USBHAL::endpointReadcore(uint8_t endpoint, uint8_t *buffer) {
- // Read from an OUT endpoint
- uint32_t size;
- uint32_t i;
- uint32_t data = 0;
- uint8_t offset;
-
- LPC_USB->USBCtrl = LOG_ENDPOINT(endpoint) | RD_EN;
- while (!(LPC_USB->USBRxPLen & PKT_RDY));
-
- size = LPC_USB->USBRxPLen & PKT_LNGTH_MASK;
-
- offset = 0;
-
- if (size > 0) {
- for (i=0; i<size; i++) {
- if (offset==0) {
- // Fetch up to four bytes of data as a word
- data = LPC_USB->USBRxData;
- }
-
- // extract a byte
- *buffer = (data>>offset) & 0xff;
- buffer++;
-
- // move on to the next byte
- offset = (offset + 8) % 32;
- }
- } else {
- dummyRead = LPC_USB->USBRxData;
- }
-
- LPC_USB->USBCtrl = 0;
-
- if ((endpoint >> 1) % 3 || (endpoint >> 1) == 0) {
- SIEselectEndpoint(endpoint);
- SIEclearBuffer();
- }
-
- return size;
-}
-
-static void endpointWritecore(uint8_t endpoint, uint8_t *buffer, uint32_t size) {
- // Write to an IN endpoint
- uint32_t temp, data;
- uint8_t offset;
-
- LPC_USB->USBCtrl = LOG_ENDPOINT(endpoint) | WR_EN;
-
- LPC_USB->USBTxPLen = size;
- offset = 0;
- data = 0;
-
- if (size>0) {
- do {
- // Fetch next data byte into a word-sized temporary variable
- temp = *buffer++;
-
- // Add to current data word
- temp = temp << offset;
- data = data | temp;
-
- // move on to the next byte
- offset = (offset + 8) % 32;
- size--;
-
- if ((offset==0) || (size==0)) {
- // Write the word to the endpoint
- LPC_USB->USBTxData = data;
- data = 0;
- }
- } while (size>0);
- } else {
- LPC_USB->USBTxData = 0;
- }
-
- // Clear WR_EN to cover zero length packet case
- LPC_USB->USBCtrl=0;
-
- SIEselectEndpoint(endpoint);
- SIEvalidateBuffer();
-}
-
-USBHAL::USBHAL(void) {
- // Disable IRQ
- NVIC_DisableIRQ(USB_IRQn);
-
- // fill in callback array
- epCallback[0] = &USBHAL::EP1_OUT_callback;
- epCallback[1] = &USBHAL::EP1_IN_callback;
- epCallback[2] = &USBHAL::EP2_OUT_callback;
- epCallback[3] = &USBHAL::EP2_IN_callback;
- epCallback[4] = &USBHAL::EP3_OUT_callback;
- epCallback[5] = &USBHAL::EP3_IN_callback;
- epCallback[6] = &USBHAL::EP4_OUT_callback;
- epCallback[7] = &USBHAL::EP4_IN_callback;
- epCallback[8] = &USBHAL::EP5_OUT_callback;
- epCallback[9] = &USBHAL::EP5_IN_callback;
- epCallback[10] = &USBHAL::EP6_OUT_callback;
- epCallback[11] = &USBHAL::EP6_IN_callback;
- epCallback[12] = &USBHAL::EP7_OUT_callback;
- epCallback[13] = &USBHAL::EP7_IN_callback;
- epCallback[14] = &USBHAL::EP8_OUT_callback;
- epCallback[15] = &USBHAL::EP8_IN_callback;
- epCallback[16] = &USBHAL::EP9_OUT_callback;
- epCallback[17] = &USBHAL::EP9_IN_callback;
- epCallback[18] = &USBHAL::EP10_OUT_callback;
- epCallback[19] = &USBHAL::EP10_IN_callback;
- epCallback[20] = &USBHAL::EP11_OUT_callback;
- epCallback[21] = &USBHAL::EP11_IN_callback;
- epCallback[22] = &USBHAL::EP12_OUT_callback;
- epCallback[23] = &USBHAL::EP12_IN_callback;
- epCallback[24] = &USBHAL::EP13_OUT_callback;
- epCallback[25] = &USBHAL::EP13_IN_callback;
- epCallback[26] = &USBHAL::EP14_OUT_callback;
- epCallback[27] = &USBHAL::EP14_IN_callback;
- epCallback[28] = &USBHAL::EP15_OUT_callback;
- epCallback[29] = &USBHAL::EP15_IN_callback;
-
- // Enable power to USB device controller
- LPC_SC->PCONP |= PCUSB;
-
- // Enable USB clocks
- LPC_USB->USBClkCtrl |= DEV_CLK_EN | AHB_CLK_EN;
- while (LPC_USB->USBClkSt != (DEV_CLK_ON | AHB_CLK_ON));
-
- // Configure pins P0.29 and P0.30 to be USB D+ and USB D-
- LPC_PINCON->PINSEL1 &= 0xc3ffffff;
- LPC_PINCON->PINSEL1 |= 0x14000000;
-
- // Disconnect USB device
- SIEdisconnect();
-
- // Configure pin P2.9 to be Connect
- LPC_PINCON->PINSEL4 &= 0xfffcffff;
- LPC_PINCON->PINSEL4 |= 0x00040000;
-
- // Connect must be low for at least 2.5uS
- wait(0.3);
-
- // Set the maximum packet size for the control endpoints
- realiseEndpoint(EP0IN, MAX_PACKET_SIZE_EP0, 0);
- realiseEndpoint(EP0OUT, MAX_PACKET_SIZE_EP0, 0);
-
- // Attach IRQ
- instance = this;
- NVIC_SetVector(USB_IRQn, (uint32_t)&_usbisr);
-
- // Enable interrupts for device events and EP0
- LPC_USB->USBDevIntEn = EP_SLOW | DEV_STAT | FRAME;
- enableEndpointEvent(EP0IN);
- enableEndpointEvent(EP0OUT);
-}
-
-USBHAL::~USBHAL(void) {
- // Ensure device disconnected
- SIEdisconnect();
- // Disable USB interrupts
- NVIC_DisableIRQ(USB_IRQn);
-}
-
-void USBHAL::connect(void) {
- NVIC_EnableIRQ(USB_IRQn);
- // Connect USB device
- SIEconnect();
-}
-
-void USBHAL::disconnect(void) {
- NVIC_DisableIRQ(USB_IRQn);
- // Disconnect USB device
- SIEdisconnect();
-}
-
-void USBHAL::configureDevice(void) {
- SIEconfigureDevice();
-}
-
-void USBHAL::unconfigureDevice(void) {
- SIEunconfigureDevice();
-}
-
-void USBHAL::setAddress(uint8_t address) {
- SIEsetAddress(address);
-}
-
-void USBHAL::EP0setup(uint8_t *buffer) {
- endpointReadcore(EP0OUT, buffer);
-}
-
-void USBHAL::EP0read(void) {
- // Not required
-}
-
-void USBHAL::EP0readStage(void) {
- // Not required
-}
-
-uint32_t USBHAL::EP0getReadResult(uint8_t *buffer) {
- return endpointReadcore(EP0OUT, buffer);
-}
-
-void USBHAL::EP0write(uint8_t *buffer, uint32_t size) {
- endpointWritecore(EP0IN, buffer, size);
-}
-
-void USBHAL::EP0getWriteResult(void) {
- // Not required
-}
-
-void USBHAL::EP0stall(void) {
- // This will stall both control endpoints
- stallEndpoint(EP0OUT);
-}
-
-EP_STATUS USBHAL::endpointRead(uint8_t endpoint, uint32_t maximumSize) {
- return EP_PENDING;
-}
-
-EP_STATUS USBHAL::endpointReadResult(uint8_t endpoint, uint8_t * buffer, uint32_t *bytesRead) {
-
- //for isochronous endpoint, we don't wait an interrupt
- if ((endpoint >> 1) % 3 || (endpoint >> 1) == 0) {
- if (!(epComplete & EP(endpoint)))
- return EP_PENDING;
- }
-
- *bytesRead = endpointReadcore(endpoint, buffer);
- epComplete &= ~EP(endpoint);
- return EP_COMPLETED;
-}
-
-EP_STATUS USBHAL::endpointWrite(uint8_t endpoint, uint8_t *data, uint32_t size) {
- if (getEndpointStallState(endpoint)) {
- return EP_STALLED;
- }
-
- epComplete &= ~EP(endpoint);
-
- endpointWritecore(endpoint, data, size);
- return EP_PENDING;
-}
-
-EP_STATUS USBHAL::endpointWriteResult(uint8_t endpoint) {
- if (epComplete & EP(endpoint)) {
- epComplete &= ~EP(endpoint);
- return EP_COMPLETED;
- }
-
- return EP_PENDING;
-}
-
-bool USBHAL::realiseEndpoint(uint8_t endpoint, uint32_t maxPacket, uint32_t flags) {
- // Realise an endpoint
- LPC_USB->USBDevIntClr = EP_RLZED;
- LPC_USB->USBReEp |= EP(endpoint);
- LPC_USB->USBEpInd = endpoint;
- LPC_USB->USBMaxPSize = maxPacket;
-
- while (!(LPC_USB->USBDevIntSt & EP_RLZED));
- LPC_USB->USBDevIntClr = EP_RLZED;
-
- // Clear stall state
- endpointStallState &= ~EP(endpoint);
-
- enableEndpointEvent(endpoint);
- return true;
-}
-
-void USBHAL::stallEndpoint(uint8_t endpoint) {
- // Stall an endpoint
- if ( (endpoint==EP0IN) || (endpoint==EP0OUT) ) {
- // Conditionally stall both control endpoints
- SIEsetEndpointStatus(EP0OUT, SIE_SES_CND_ST);
- } else {
- SIEsetEndpointStatus(endpoint, SIE_SES_ST);
-
- // Update stall state
- endpointStallState |= EP(endpoint);
- }
-}
-
-void USBHAL::unstallEndpoint(uint8_t endpoint) {
- // Unstall an endpoint. The endpoint will also be reinitialised
- SIEsetEndpointStatus(endpoint, 0);
-
- // Update stall state
- endpointStallState &= ~EP(endpoint);
-}
-
-bool USBHAL::getEndpointStallState(uint8_t endpoint) {
- // Returns true if endpoint stalled
- return endpointStallState & EP(endpoint);
-}
-
-void USBHAL::remoteWakeup(void) {
- // Remote wakeup
- uint8_t status;
-
- // Enable USB clocks
- LPC_USB->USBClkCtrl |= DEV_CLK_EN | AHB_CLK_EN;
- while (LPC_USB->USBClkSt != (DEV_CLK_ON | AHB_CLK_ON));
-
- status = SIEgetDeviceStatus();
- SIEsetDeviceStatus(status & ~SIE_DS_SUS);
-}
-
-void USBHAL::_usbisr(void) {
- instance->usbisr();
-}
-
-
-void USBHAL::usbisr(void) {
- uint8_t devStat;
-
- if (LPC_USB->USBDevIntSt & FRAME) {
- // Start of frame event
- SOF(SIEgetFrameNumber());
- // Clear interrupt status flag
- LPC_USB->USBDevIntClr = FRAME;
- }
-
- if (LPC_USB->USBDevIntSt & DEV_STAT) {
- // Device Status interrupt
- // Must clear the interrupt status flag before reading the device status from the SIE
- LPC_USB->USBDevIntClr = DEV_STAT;
-
- // Read device status from SIE
- devStat = SIEgetDeviceStatus();
- //printf("devStat: %d\r\n", devStat);
-
- if (devStat & SIE_DS_SUS_CH) {
- // Suspend status changed
- if((devStat & SIE_DS_SUS) != 0) {
- suspendStateChanged(0);
- }
- }
-
- if (devStat & SIE_DS_RST) {
- // Bus reset
- if((devStat & SIE_DS_SUS) == 0) {
- suspendStateChanged(1);
- }
- busReset();
- }
- }
-
- if (LPC_USB->USBDevIntSt & EP_SLOW) {
- // (Slow) Endpoint Interrupt
-
- // Process each endpoint interrupt
- if (LPC_USB->USBEpIntSt & EP(EP0OUT)) {
- if (selectEndpointClearInterrupt(EP0OUT) & SIE_SE_STP) {
- // this is a setup packet
- EP0setupCallback();
- } else {
- EP0out();
- }
- LPC_USB->USBDevIntClr = EP_SLOW;
- }
-
- if (LPC_USB->USBEpIntSt & EP(EP0IN)) {
- selectEndpointClearInterrupt(EP0IN);
- LPC_USB->USBDevIntClr = EP_SLOW;
- EP0in();
- }
-
- for (uint8_t num = 2; num < 16*2; num++) {
- if (LPC_USB->USBEpIntSt & EP(num)) {
- selectEndpointClearInterrupt(num);
- epComplete |= EP(num);
- LPC_USB->USBDevIntClr = EP_SLOW;
- if ((instance->*(epCallback[num - 2]))()) {
- epComplete &= ~EP(num);
- }
- }
- }
- }
-}
-
-#endif