# Frederik Rouleau
# Carlos Lamas
#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-# Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-# (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
# Output format. (can be srec, ihex, binary)
FORMAT = ihex
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = obj_$(TARGET)
-
-
-# Optimization level, can be [0, 1, 2, 3, s].
+# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s
+COLOR ?= true
+
+ifeq ($(COLOR),true)
+ NO_COLOR=\033[0m
+ OK_COLOR=\033[32;01m
+ ERROR_COLOR=\033[31;01m
+ WARN_COLOR=\033[33;01m
+ BLUE=\033[0;34m
+ BOLD=\033[1m
+endif
+
+ifdef quick
+ QUICK = $(quick)
+endif
+
+QUICK ?= false
+AUTOGEN ?= false
+
+ifneq ($(shell awk --version 2>/dev/null),)
+ AWK=awk
+else
+ AWK=cat && test
+endif
+
+OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)\n
+ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)\n
+WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)\n
-# Debugging format.
-# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
-# AVR Studio 4.10 requires dwarf-2.
-# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
-DEBUG = dwarf-2
+ifndef $(SILENT)
+ SILENT = false
+endif
+TAB_LOG = printf "\n$$LOG\n\n" | $(AWK) '{ sub(/^/," | "); print }'
+TAB_LOG_PLAIN = printf "$$LOG\n"
+AWK_STATUS = $(AWK) '{ printf " %-10s\n", $$1; }'
+AWK_CMD = $(AWK) '{ printf "%-99s", $$0; }'
+PRINT_ERROR = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && false
+PRINT_WARNING = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG)
+PRINT_ERROR_PLAIN = ($(SILENT) ||printf " $(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && false && break
+PRINT_WARNING_PLAIN = ($(SILENT) || printf " $(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN)
+PRINT_OK = $(SILENT) || printf " $(OK_STRING)" | $(AWK_STATUS)
+BUILD_CMD = LOG=$$($(CMD) 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING); else $(PRINT_OK); fi;
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(subst :, ,$(VPATH))
+EXTRAINCDIRS += $(subst :, ,$(VPATH))
# Compiler flag to set the C Standard level.
# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL
CDEFS += $(OPT_DEFS)
# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
ADEFS += $(OPT_DEFS)
# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
CPPDEFS += $(OPT_DEFS)
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
+CFLAGS += -g$(DEBUG)
CFLAGS += $(CDEFS)
CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fno-inline-small-functions
-CFLAGS += -fpack-struct
-CFLAGS += -fshort-enums
-CFLAGS += -fno-strict-aliasing
+# add color
+ifeq ($(COLOR),true)
+ifeq ("$(shell echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
+ CFLAGS+= -fdiagnostics-color
+endif
+endif
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
#CFLAGS += -mshort-calls
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += -g$(DEBUG)
CPPFLAGS += $(CPPDEFS)
CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -fpack-struct
-CPPFLAGS += -fshort-enums
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -ffunction-sections
-CPPFLAGS += -fdata-sections
# to supress "warning: only initialized variables can be placed into program memory area"
CPPFLAGS += -w
CPPFLAGS += -Wall
# for use in COFF files, additional information about filenames
# and function names needs to be present in the assembler source
# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
+# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
+ASFLAGS += $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
ifdef CONFIG_H
ASFLAGS += -include $(CONFIG_H)
endif
-
#---------------- Library Options ----------------
# Minimalistic printf version
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB =
+PRINTF_LIB =
#PRINTF_LIB = $(PRINTF_LIB_MIN)
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB =
+SCANF_LIB =
#SCANF_LIB = $(SCANF_LIB_MIN)
#SCANF_LIB = $(SCANF_LIB_FLOAT)
MATH_LIB = -lm
-# List any extra directories to look for libraries here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS =
-
-
-
-#---------------- External Memory Options ----------------
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# used for variables (.data/.bss) and heap (malloc()).
-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# only used for heap (malloc()).
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
-
-EXTMEMOPTS =
-
-
-
#---------------- Linker Options ----------------
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# Comennt out "--relax" option to avoid a error such:
# (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12'
#
-LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
#LDFLAGS += -Wl,--relax
-LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
# You can give EXTRALDFLAGS at 'make' command line.
LDFLAGS += $(EXTRALDFLAGS)
-
-
-#---------------- Debugging Options ----------------
-
-# For simulavr only - target MCU frequency.
-DEBUG_MFREQ = $(F_CPU)
-
-# Set the DEBUG_UI to either gdb or insight.
-# DEBUG_UI = gdb
-DEBUG_UI = insight
-
-# Set the debugging back-end to either avarice, simulavr.
-DEBUG_BACKEND = avarice
-#DEBUG_BACKEND = simulavr
-
-# GDB Init Filename.
-GDBINIT_FILE = __avr_gdbinit
-
-# When using avarice settings for the JTAG
-JTAG_DEV = /dev/com1
-
-# Debugging port used to communicate between GDB / avarice / simulavr.
-DEBUG_PORT = 4242
-
-# Debugging host used to communicate between GDB / avarice / simulavr, normally
-# just set to localhost unless doing some sort of crazy debugging when
-# avarice is running on a different computer.
-DEBUG_HOST = localhost
-
-
-
-#============================================================================
-
-
# Define programs and commands.
SHELL = sh
-CC = avr-gcc
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-AR = avr-ar rcs
-NM = avr-nm
REMOVE = rm -f
REMOVEDIR = rmdir
COPY = cp
WINSHELL = cmd
-
+SECHO = $(SILENT) || echo
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = -------- begin --------
MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_BEFORE = Size before:
MSG_SIZE_AFTER = Size after:
MSG_COFF = Converting to AVR COFF:
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
MSG_FLASH = Creating load file for Flash:
MSG_EEPROM = Creating load file for EEPROM:
+MSG_BIN = Creating binary load file for Flash:
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
+MSG_COMPILING = Compiling:
+MSG_COMPILING_CPP = Compiling:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
MSG_CREATING_LIBRARY = Creating library:
-
-
+MSG_SUBMODULE_DIRTY = $(WARN_COLOR)WARNING:$(NO_COLOR)\n \
+ Some git sub-modules are out of date or modified, please consider runnning:$(BOLD)\n\
+ git submodule sync --recursive\n\
+ git submodule update --init --recursive$(NO_COLOR)\n\n\
+ You can ignore this warning if you are not compiling any ChibiOS keyboards,\n\
+ or if you have modified the ChibiOS libraries yourself. \n\n
# Define all object files.
# Compiler flags to generate dependency files.
#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-GENDEPFLAGS = -MMD -MP -MF .dep/$(subst /,_,$@).d
+GENDEPFLAGS = -MMD -MP -MF $(BUILD_DIR)/.dep/$(subst /,_,$(subst $(BUILD_DIR)/,,$@)).d
# Combine all necessary flags and optional flags.
# Add target processor to flags.
# You can give extra flags at 'make' command line like: make EXTRAFLAGS=-DFOO=bar
-ALL_CFLAGS = -mmcu=$(MCU) $(CFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
-
-
-
-
+ALL_CFLAGS = $(MCUFLAGS) $(CFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
+ALL_CPPFLAGS = $(MCUFLAGS) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
+ALL_ASFLAGS = $(MCUFLAGS) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
# Default target.
-all: begin gccversion sizebefore build sizeafter end
+all: build sizeafter
+
+# Quick make that doesn't clean
+quick: build sizeafter
# Change the build target to build a HEX file or a library.
-build: elf hex eep lss sym
+build: elf hex
+#build: elf hex eep lss sym
#build: lib
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-eep: $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
+elf: $(BUILD_DIR)/$(TARGET).elf
+hex: $(BUILD_DIR)/$(TARGET).hex
+eep: $(BUILD_DIR)/$(TARGET).eep
+lss: $(BUILD_DIR)/$(TARGET).lss
+sym: $(BUILD_DIR)/$(TARGET).sym
LIBNAME=lib$(TARGET).a
lib: $(LIBNAME)
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-end:
- @echo $(MSG_END)
- @echo
-
+check_submodule:
+ git submodule status --recursive | \
+ while IFS= read -r x; do \
+ case "$$x" in \
+ \ *) ;; \
+ *) printf "$(MSG_SUBMODULE_DIRTY)";break;; \
+ esac \
+ done
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
-ELFSIZE = $(SIZE) $(TARGET).elf
+ELFSIZE = $(SIZE) $(BUILD_DIR)/$(TARGET).elf
sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
+ @if test -f $(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \
+ 2>/dev/null; $(SECHO); fi
+sizeafter: $(BUILD_DIR)/$(TARGET).hex
+ @if test -f $(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \
+ 2>/dev/null; $(SECHO); fi
+ # test file sizes eventually
+ # @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | $(AWK) 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-
-
-# Program the device.
-program: $(TARGET).hex $(TARGET).eep
- $(PROGRAM_CMD)
-
-teensy: $(TARGET).hex
- teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
-ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
- dfu-programmer $(MCU) erase --force
-else
- dfu-programmer $(MCU) erase
-endif
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-dfu-start:
- dfu-programmer $(MCU) reset
- dfu-programmer $(MCU) start
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- $(COPY) $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
- $(REMOVE) $(TARGET)eep.hex
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
- dfu-programmer $(MCU) reset
-
-
-# Generate avr-gdb config/init file which does the following:
-# define the reset signal, load the target file, connect to target, and set
-# a breakpoint at main().
-gdb-config:
- @$(REMOVE) $(GDBINIT_FILE)
- @echo define reset >> $(GDBINIT_FILE)
- @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
- @echo end >> $(GDBINIT_FILE)
- @echo file $(TARGET).elf >> $(GDBINIT_FILE)
- @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
-ifeq ($(DEBUG_BACKEND),simulavr)
- @echo load >> $(GDBINIT_FILE)
-endif
- @echo break main >> $(GDBINIT_FILE)
-
-debug: gdb-config $(TARGET).elf
-ifeq ($(DEBUG_BACKEND), avarice)
- @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
- @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
- $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
- @$(WINSHELL) /c pause
-
-else
- @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
- $(DEBUG_MFREQ) --port $(DEBUG_PORT)
-endif
- @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT = $(OBJCOPY) --debugging
-COFFCONVERT += --change-section-address .data-0x800000
-COFFCONVERT += --change-section-address .bss-0x800000
-COFFCONVERT += --change-section-address .noinit-0x800000
-COFFCONVERT += --change-section-address .eeprom-0x810000
-
-
-
-coff: $(TARGET).elf
- @echo
- @echo $(MSG_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
- @echo
- @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
-
-
+gccversion :
+ @$(SILENT) || $(CC) --version
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@
+ @$(SILENT) || printf "$(MSG_FLASH) $@" | $(AWK_CMD)
+ $(eval CMD=$(HEX) $< $@)
+ @$(BUILD_CMD)
+ @if $(AUTOGEN); then \
+ $(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/$(KEYBOARD)_$(KEYMAP).hex\n"; \
+ $(COPY) $@ $(KEYMAP_PATH)/$(KEYBOARD)_$(KEYMAP).hex; \
+ else \
+ $(COPY) $@ $(TARGET).hex; \
+ fi
%.eep: %.elf
- @echo
- @echo $(MSG_EEPROM) $@
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
- --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+ @$(SILENT) || printf "$(MSG_EEPROM) $@" | $(AWK_CMD)
+ $(eval CMD=$(EEP) $< $@ || exit 0)
+ @$(BUILD_CMD)
# Create extended listing file from ELF output file.
%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -S -z $< > $@
+ @$(SILENT) || printf "$(MSG_EXTENDED_LISTING) $@" | $(AWK_CMD)
+ $(eval CMD=$(OBJDUMP) -h -S -z $< > $@)
+ @$(BUILD_CMD)
# Create a symbol table from ELF output file.
%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
+ @$(SILENT) || printf "$(MSG_SYMBOL_TABLE) $@" | $(AWK_CMD)
+ $(eval CMD=$(NM) -n $< > $@ )
+ @$(BUILD_CMD)
+%.bin: %.elf
+ @$(SILENT) || printf "$(MSG_BIN) $@" | $(AWK_CMD)
+ $(eval CMD=$(BIN) $< $@ || exit 0)
+ @$(BUILD_CMD)
# Create library from object files.
-.SECONDARY : $(TARGET).a
+.SECONDARY : $(BUILD_DIR)/$(TARGET).a
.PRECIOUS : $(OBJ)
%.a: $(OBJ)
- @echo
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
+ @$(SILENT) || printf "$(MSG_CREATING_LIBRARY) $@" | $(AWK_CMD)
+ $(eval CMD=$(AR) $@ $(OBJ) )
+ @$(BUILD_CMD)
+BEGIN = gccversion check_submodule sizebefore
# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
+.SECONDARY : $(BUILD_DIR)/$(TARGET).elf
.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
+%.elf: $(OBJ) | $(BEGIN)
+ @$(SILENT) || printf "$(MSG_LINKING) $@" | $(AWK_CMD)
+ $(eval CMD=$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS))
+ @$(BUILD_CMD)
# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
- @echo
- mkdir -p $(@D)
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
+$(OBJDIR)/%.o : %.c | $(BEGIN)
+ @mkdir -p $(@D)
+ @$(SILENT) || printf "$(MSG_COMPILING) $<" | $(AWK_CMD)
+ $(eval CMD=$(CC) -c $(ALL_CFLAGS) $< -o $@)
+ @$(BUILD_CMD)
# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
- @echo
- mkdir -p $(@D)
- @echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
+$(OBJDIR)/%.o : %.cpp | $(BEGIN)
+ @mkdir -p $(@D)
+ @$(SILENT) || printf "$(MSG_COMPILING_CPP) $<" | $(AWK_CMD)
+ $(eval CMD=$(CC) -c $(ALL_CPPFLAGS) $< -o $@)
+ @$(BUILD_CMD)
# Compile: create assembler files from C source files.
-%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
+%.s : %.c | $(BEGIN)
+ @$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
+ $(eval CMD=$(CC) -S $(ALL_CFLAGS) $< -o $@)
+ @$(BUILD_CMD)
# Compile: create assembler files from C++ source files.
-%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
+%.s : %.cpp | $(BEGIN)
+ @$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
+ $(eval CMD=$(CC) -S $(ALL_CPPFLAGS) $< -o $@)
+ @$(BUILD_CMD)
# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
- @echo
- mkdir -p $(@D)
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
+$(OBJDIR)/%.o : %.S | $(BEGIN)
+ @mkdir -p $(@D)
+ @$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
+ $(eval CMD=$(CC) -c $(ALL_ASFLAGS) $< -o $@)
+ @$(BUILD_CMD)
# Create preprocessed source for use in sending a bug report.
-%.i : %.c
- $(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@
-
+%.i : %.c | $(BEGIN)
+ $(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@
# Target: clean project.
-clean: begin clean_list end
-
-clean_list :
- @echo
- $(REMOVE) $(TARGET).hex
- $(REMOVE) $(TARGET).eep
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(OBJ)
- $(REMOVE) $(LST)
- $(REMOVE) $(OBJ:.o=.s)
- $(REMOVE) $(OBJ:.o=.i)
- $(REMOVE) -r .dep
- $(REMOVE) -r $(OBJDIR)
+clean:
show_path:
@echo VPATH=$(VPATH)
@echo SRC=$(SRC)
+SUBDIRS := $(filter-out %/util/ %/doc/ %/keymaps/ %/old_keymap_files/,$(dir $(wildcard $(TOP_DIR)/keyboards/**/*/Makefile)))
+SUBDIRS := $(SUBDIRS) $(dir $(wildcard $(TOP_DIR)/keyboards/*/.))
+SUBDIRS := $(sort $(SUBDIRS))
+# $(error $(SUBDIRS))
+all-keyboards-defaults-%:
+ @for x in $(SUBDIRS) ; do \
+ printf "Compiling with default: $$x" | $(AWK_CMD); \
+ LOG=$$($(MAKE) -C $$x $(subst all-keyboards-defaults-,,$@) VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+ done
+
+all-keyboards-defaults: all-keyboards-defaults-all
+
+KEYBOARDS := $(SUBDIRS:$(TOP_DIR)/keyboards/%/=/keyboards/%)
+all-keyboards-all: $(addsuffix -all,$(KEYBOARDS))
+all-keyboards-quick: $(addsuffix -quick,$(KEYBOARDS))
+all-keyboards-clean: $(addsuffix -clean,$(KEYBOARDS))
+all-keyboards: all-keyboards-all
+
+define make_keyboard
+$(eval KEYBOARD=$(patsubst /keyboards/%,%,$1))
+$(eval SUBPROJECT=$(lastword $(subst /, ,$(KEYBOARD))))
+$(eval KEYBOARD=$(firstword $(subst /, ,$(KEYBOARD))))
+$(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/keymaps/*/.))))
+$(eval KEYMAPS+=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/$(SUBPROJECT)/keymaps/*/.))))
+@for x in $(KEYMAPS) ; do \
+ printf "Compiling $(BOLD)$(KEYBOARD)/$(SUBPROJECT)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | $(AWK) '{ printf "%-118s", $$0; }'; \
+ LOG=$$($(MAKE) -C $(TOP_DIR)$1 $2 keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+done
+endef
+
+define make_keyboard_helper
+# Just remove the -quick, -all and so on from the first argument and pass it forward
+$(call make_keyboard,$(subst -$2,,$1),$2)
+endef
+
+/keyboards/%-quick:
+ $(call make_keyboard_helper,$@,quick)
+/keyboards/%-all:
+ $(call make_keyboard_helper,$@,all)
+/keyboards/%-clean:
+ $(call make_keyboard_helper,$@,clean)
+/keyboards/%:
+ $(call make_keyboard_helper,$@,all)
+
+all-keymaps-%:
+ $(eval MAKECONFIG=$(call get_target,all-keymaps,$@))
+ $(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboards/$(KEYBOARD)/keymaps/*/.))))
+ @for x in $(KEYMAPS) ; do \
+ printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | $(AWK) '{ printf "%-118s", $$0; }'; \
+ LOG=$$($(MAKE) $(subst all-keymaps-,,$@) keyboard=$(KEYBOARD) keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+ done
+
+all-keymaps: all-keymaps-all
+
+GOAL=$(MAKECMDGOALS)
+ifeq ($(MAKECMDGOALS),)
+GOAL = all
+endif
+CLEANING_GOALS=clean clean_list all
+ifneq ($(findstring $(GOAL),$(CLEANING_GOALS)),)
+$(shell $(REMOVE) -r $(BUILD_DIR) 2>/dev/null)
+$(shell $(REMOVE) -r $(TOP_DIR)/$(BUILD_DIR))
+$(shell $(REMOVE) -r $(KEYBOARD_PATH)/$(BUILD_DIR))
+$(shell if $$SUBPROJECT; then $(REMOVE) -r $(SUBPROJECT_PATH)/$(BUILD_DIR); fi)
+$(shell $(REMOVE) -r $(KEYMAP_PATH)/$(BUILD_DIR))
+endif
+
+# Create build directory
+$(shell mkdir $(BUILD_DIR) 2>/dev/null)
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+-include $(shell mkdir $(BUILD_DIR)/.dep 2>/dev/null) $(wildcard $(BUILD_DIR)/.dep/*)
# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
-build elf hex eep lss sym coff extcoff \
+.PHONY : all quick finish sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff check_submodule \
clean clean_list debug gdb-config show_path \
-program teensy dfu flip dfu-ee flip-ee dfu-start
+program teensy dfu flip dfu-ee flip-ee dfu-start \
+all-keyboards-defaults all-keyboards all-keymaps \
+all-keyboards-defaults-% all-keyboards-% all-keymaps-%
projects / qmk_firmware.git / blobdiff