# Output format. (can be srec, ihex, binary)
FORMAT = ihex
+BUILD_DIR = .build
# Object files directory
# To put object files in current directory, use a dot (.), do NOT make
# this an empty or blank macro!
-OBJDIR = obj_$(TARGET)
+OBJDIR = $(BUILD_DIR)/obj_$(TARGET)
# Optimization level, can be [0, 1, 2, 3, s].
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
DEBUG = dwarf-2
+COLOR?=true
+
+ifeq ($(COLOR),true)
+ NO_COLOR=\033[0m
+ OK_COLOR=\033[32;01m
+ ERROR_COLOR=\033[31;01m
+ WARN_COLOR=\033[33;01m
+ BLUE=\033[0;34m
+ BOLD=\033[1m
+endif
+
+OK_STRING=$(OK_COLOR)[OK]$(NO_COLOR)
+ERROR_STRING=$(ERROR_COLOR)[ERRORS]$(NO_COLOR)
+WARN_STRING=$(WARN_COLOR)[WARNINGS]$(NO_COLOR)
+
+ifndef $(SILENT)
+ SILENT = false
+endif
+
+TAB_LOG = printf "\n$$LOG\n\n" | awk '{ sub(/^/," | "); print }'
+TAB_LOG_PLAIN = printf "$$LOG\n"
+AWK_STATUS = awk '{ printf " %-10s\n", $$1; }'
+AWK_CMD = awk '{ printf "%-69s", $$0; }'
+PRINT_ERROR = ($(SILENT) ||printf "$(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG) && false
+PRINT_WARNING = ($(SILENT) || printf "$(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG)
+PRINT_ERROR_PLAIN = ($(SILENT) ||printf "$(ERROR_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN) && false
+PRINT_WARNING_PLAIN = ($(SILENT) || printf "$(WARN_STRING)" | $(AWK_STATUS)) && $(TAB_LOG_PLAIN)
+PRINT_OK = $(SILENT) || printf "$(OK_STRING)" | $(AWK_STATUS)
+BUILD_CMD = LOG=$$($(CMD) 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING); else $(PRINT_OK); fi;
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
CFLAGS += -fno-strict-aliasing
+# add color
+ifeq ($(COLOR),true)
+ifeq ("$(shell echo "int main(){}" | $(CC) -fdiagnostics-color -x c - -o /dev/null 2>&1)", "")
+ CFLAGS+= -fdiagnostics-color
+else ifeq ("$(shell echo "int main(){}" | $(CC) -fcolor-diagnostics -x c - -o /dev/null 2>&1)", "")
+ CFLAGS+= -fcolor-diagnostics
+endif
+endif
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
#CFLAGS += -mshort-calls
ifdef CONFIG_H
CFLAGS += -include $(CONFIG_H)
endif
-ifdef CONFIG_USER_H
- CFLAGS += -include $(CONFIG_USER_H)
-endif
#---------------- Compiler Options C++ ----------------
ifdef CONFIG_H
CPPFLAGS += -include $(CONFIG_H)
endif
-ifdef CONFIG_USER_H
- CPPFLAGS += -include $(CONFIG_USER_H)
-endif
#---------------- Assembler Options ----------------
ifdef CONFIG_H
ASFLAGS += -include $(CONFIG_H)
endif
-ifdef CONFIG_USER_H
- ASFLAGS += -include $(CONFIG_USER_H)
-endif
-
#---------------- Library Options ----------------
# Minimalistic printf version
# Comennt out "--relax" option to avoid a error such:
# (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12'
#
-LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS = -Wl,-Map=$(BUILD_DIR)/$(TARGET).map,--cref
#LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
REMOVEDIR = rmdir
COPY = cp
WINSHELL = cmd
+SECHO = $(SILENT) || echo
# Autodecct teensy loader
ifneq (, $(shell which teensy-loader-cli 2>/dev/null))
TEENSY_LOADER_CLI = teensy-loader-cli
MSG_EXTENDED_LISTING = Creating Extended Listing:
MSG_SYMBOL_TABLE = Creating Symbol Table:
MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
+MSG_COMPILING = Compiling:
+MSG_COMPILING_CPP = Compiling:
MSG_ASSEMBLING = Assembling:
MSG_CLEANING = Cleaning project:
MSG_CREATING_LIBRARY = Creating library:
# Compiler flags to generate dependency files.
#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-GENDEPFLAGS = -MMD -MP -MF .dep/$(subst /,_,$@).d
+GENDEPFLAGS = -MMD -MP -MF $(BUILD_DIR)/.dep/$(subst /,_,$@).d
# Combine all necessary flags and optional flags.
ALL_CPPFLAGS = -mmcu=$(MCU) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
-
-
-
-
# Default target.
all:
- $(MAKE) begin
- $(MAKE) gccversion
- $(MAKE) sizebefore
- $(MAKE) build
- $(MAKE) sizeafter
- $(MAKE) end
+ @$(MAKE) begin
+ @$(MAKE) gccversion
+ @$(MAKE) sizebefore
+ @$(MAKE) clean_list # force clean each time
+ @$(MAKE) build
+ @$(MAKE) sizeafter
+ @$(MAKE) end
+
+# Quick make that doesn't clean
+quick:
+ @$(MAKE) begin
+ @$(MAKE) gccversion
+ @$(MAKE) sizebefore
+ @$(MAKE) build
+ @$(MAKE) sizeafter
+ @$(MAKE) end
# Change the build target to build a HEX file or a library.
-build: elf hex eep lss sym
+build: elf hex
+#build: elf hex eep lss sym
#build: lib
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-eep: $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
+elf: $(BUILD_DIR)/$(TARGET).elf
+hex: $(BUILD_DIR)/$(TARGET).hex
+eep: $(BUILD_DIR)/$(TARGET).eep
+lss: $(BUILD_DIR)/$(TARGET).lss
+sym: $(BUILD_DIR)/$(TARGET).sym
LIBNAME=lib$(TARGET).a
lib: $(LIBNAME)
# AVR Studio 3.x does not check make's exit code but relies on
# the following magic strings to be generated by the compile job.
begin:
- @echo $(MSG_BEGIN)
+ @$(SECHO) $(MSG_BEGIN)
end:
- @echo $(MSG_END)
+ @$(SECHO) $(MSG_END)
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
-ELFSIZE = $(SIZE) $(TARGET).elf
+ELFSIZE = $(SIZE) $(BUILD_DIR)/$(TARGET).elf
sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
+ @if test -f $(TARGET).hex; then $(SECHO) $(MSG_SIZE_BEFORE); $(SILENT) || $(HEXSIZE); \
+ 2>/dev/null; $(SECHO); fi
sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-
+ @if test -f $(TARGET).hex; then $(SECHO); $(SECHO) $(MSG_SIZE_AFTER); $(SILENT) || $(HEXSIZE); \
+ 2>/dev/null; $(SECHO); fi
+ # test file sizes eventually
+ # @if [[ $($(SIZE) --target=$(FORMAT) $(TARGET).hex | awk 'NR==2 {print "0x"$5}') -gt 0x200 ]]; then $(SECHO) "File is too big!"; fi
# Display compiler version information.
gccversion :
- @$(CC) --version
+ @$(SILENT) || $(CC) --version
# Program the device.
-program: $(TARGET).hex $(TARGET).eep
+program: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
$(PROGRAM_CMD)
-teensy: $(TARGET).hex
- $(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(TARGET).hex
+teensy: $(BUILD_DIR)/$(TARGET).hex
+ $(TEENSY_LOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex
-flip: $(TARGET).hex
+flip: $(BUILD_DIR)/$(TARGET).hex
batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(BUILD_DIR)/$(TARGET).hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
-dfu: $(TARGET).hex sizeafter
+dfu: $(BUILD_DIR)/$(TARGET).hex sizeafter
ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
dfu-programmer $(MCU) erase --force
else
dfu-programmer $(MCU) erase
endif
dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash $(TARGET).hex
+ dfu-programmer $(MCU) flash $(BUILD_DIR)/$(TARGET).hex
+ dfu-programmer $(MCU) reset
+
+dfu-no-build:
+ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
+ dfu-programmer $(MCU) erase --force
+else
+ dfu-programmer $(MCU) erase
+endif
+ dfu-programmer $(MCU) erase
+ dfu-programmer $(MCU) flash $(KEYMAP_PATH)/compiled.hex
dfu-programmer $(MCU) reset
dfu-start:
dfu-programmer $(MCU) reset
dfu-programmer $(MCU) start
-flip-ee: $(TARGET).hex $(TARGET).eep
- $(COPY) $(TARGET).eep $(TARGET)eep.hex
+flip-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
+ $(COPY) $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET)eep.hex
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(BUILD_DIR)/$(TARGET)eep.hex program
batchisp -hardware usb -device $(MCU) -operation start reset 0
- $(REMOVE) $(TARGET)eep.hex
+ $(REMOVE) $(BUILD_DIR)/$(TARGET)eep.hex
-dfu-ee: $(TARGET).hex $(TARGET).eep
+dfu-ee: $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep
ifneq (, $(findstring 0.7, $(shell dfu-programmer --version 2>&1)))
- dfu-programmer $(MCU) flash --eeprom $(TARGET).eep
+ dfu-programmer $(MCU) flash --eeprom $(BUILD_DIR)/$(TARGET).eep
else
- dfu-programmer $(MCU) flash-eeprom $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom $(BUILD_DIR)/$(TARGET).eep
endif
dfu-programmer $(MCU) reset
@echo define reset >> $(GDBINIT_FILE)
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@echo end >> $(GDBINIT_FILE)
- @echo file $(TARGET).elf >> $(GDBINIT_FILE)
+ @echo file $(BUILD_DIR)/$(TARGET).elf >> $(GDBINIT_FILE)
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
ifeq ($(DEBUG_BACKEND),simulavr)
@echo load >> $(GDBINIT_FILE)
endif
@echo break main >> $(GDBINIT_FILE)
-debug: gdb-config $(TARGET).elf
+debug: gdb-config $(BUILD_DIR)/$(TARGET).elf
ifeq ($(DEBUG_BACKEND), avarice)
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
- $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+ $(BUILD_DIR)/$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
@$(WINSHELL) /c pause
else
-coff: $(TARGET).elf
- @echo $(MSG_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+coff: $(BUILD_DIR)/$(TARGET).elf
+ @$(SECHO) $(MSG_COFF) $(BUILD_DIR)/$(TARGET).cof
+ $(COFFCONVERT) -O coff-avr $< $(BUILD_DIR)/$(TARGET).cof
-extcoff: $(TARGET).elf
- @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+extcoff: $(BUILD_DIR)/$(TARGET).elf
+ @$(SECHO) $(MSG_EXTENDED_COFF) $(BUILD_DIR)/$(TARGET).cof
+ $(COFFCONVERT) -O coff-ext-avr $< $(BUILD_DIR)/$(TARGET).cof
# Create final output files (.hex, .eep) from ELF output file.
%.hex: %.elf
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@
+ @$(SILENT) || printf "$(MSG_FLASH) $@" | $(AWK_CMD)
+ $(eval CMD=$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@)
+ @$(BUILD_CMD)
+ @$(COPY) $@ $(TARGET).hex
+ $(SILENT) || printf "Copying $(TARGET).hex to keymaps/$(KEYMAP)/compiled.hex" | $(AWK_CMD)
+ $(eval CMD=$(COPY) $@ $(KEYMAP_PATH)/compiled.hex)
+ @$(BUILD_CMD)
%.eep: %.elf
- @echo $(MSG_EEPROM) $@
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
- --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+ @$(SILENT) || printf "$(MSG_EEPROM) $@" | $(AWK_CMD)
+ $(eval CMD=$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0)
+ @$(BUILD_CMD)
# Create extended listing file from ELF output file.
%.lss: %.elf
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -S -z $< > $@
+ @$(SILENT) || printf "$(MSG_EXTENDED_LISTING) $@" | $(AWK_CMD)
+ $(eval CMD=$(OBJDUMP) -h -S -z $< > $@)
+ @$(BUILD_CMD)
# Create a symbol table from ELF output file.
%.sym: %.elf
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
+ @$(SILENT) || printf "$(MSG_SYMBOL_TABLE) $@" | $(AWK_CMD)
+ $(eval CMD=$(NM) -n $< > $@ )
+ @$(BUILD_CMD)
# Create library from object files.
-.SECONDARY : $(TARGET).a
+.SECONDARY : $(BUILD_DIR)/$(TARGET).a
.PRECIOUS : $(OBJ)
%.a: $(OBJ)
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
-
+ @$(SILENT) || printf "$(MSG_CREATING_LIBRARY) $@" | $(AWK_CMD)
+ $(eval CMD=$(AR) $@ $(OBJ) )
+ @$(BUILD_CMD)
# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
+.SECONDARY : $(BUILD_DIR)/$(TARGET).elf
.PRECIOUS : $(OBJ)
%.elf: $(OBJ)
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
+ @$(SILENT) || printf "$(MSG_LINKING) $@" | $(AWK_CMD)
+ $(eval CMD=$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS))
+ @$(BUILD_CMD)
# Compile: create object files from C source files.
$(OBJDIR)/%.o : %.c
- mkdir -p $(@D)
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
+ @mkdir -p $(@D)
+ @$(SILENT) || printf "$(MSG_COMPILING) $<" | $(AWK_CMD)
+ $(eval CMD=$(CC) -c $(ALL_CFLAGS) $< -o $@)
+ @$(BUILD_CMD)
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
- mkdir -p $(@D)
- @echo $(MSG_COMPILING_CPP) $<
+ @mkdir -p $(@D)
+ @$(SILENT) || printf "$(MSG_COMPILING_CPP) $<" | $(AWK_CMD)
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
+ @$(BUILD_CMD)
# Compile: create assembler files from C source files.
%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
+ @$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
+ $(eval CMD=$(CC) -S $(ALL_CFLAGS) $< -o $@)
+ @$(BUILD_CMD)
# Compile: create assembler files from C++ source files.
%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
+ @$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
+ $(eval CMD=$(CC) -S $(ALL_CPPFLAGS) $< -o $@)
+ @$(BUILD_CMD)
# Assemble: create object files from assembler source files.
$(OBJDIR)/%.o : %.S
- mkdir -p $(@D)
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
+ @mkdir -p $(@D)
+ @$(SILENT) || printf "$(MSG_ASSEMBLING) $<" | $(AWK_CMD)
+ $(eval CMD=$(CC) -c $(ALL_ASFLAGS) $< -o $@)
+ @$(BUILD_CMD)
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@
-
# Target: clean project.
clean: begin clean_list end
clean_list :
- $(REMOVE) $(TARGET).hex
- $(REMOVE) $(TARGET).eep
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(OBJ)
- $(REMOVE) $(LST)
- $(REMOVE) $(OBJ:.o=.s)
- $(REMOVE) $(OBJ:.o=.i)
- $(REMOVE) -r .dep
- $(REMOVE) -r $(OBJDIR)
+ $(REMOVE) -r $(TOP_DIR)/$(BUILD_DIR)
+ $(REMOVE) -r $(KEYBOARD_PATH)/$(BUILD_DIR)
+ $(REMOVE) -r $(KEYMAP_PATH)/$(BUILD_DIR)
show_path:
@echo VPATH=$(VPATH)
@echo SRC=$(SRC)
+SUBDIRS := $(sort $(dir $(wildcard $(TOP_DIR)/keyboard/*/.)))
+all-keyboards-defaults:
+ @for x in $(SUBDIRS) ; do \
+ printf "Compiling with default: $$x" | $(AWK_CMD); \
+ LOG=$$($(MAKE) -C $$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+ done
+
+KEYBOARDS := $(SUBDIRS:$(TOP_DIR)/keyboard/%/=/keyboard/%)
+all-keyboards: $(KEYBOARDS)
+/keyboard/%:
+ $(eval KEYBOARD=$(patsubst /keyboard/%,%,$@))
+ $(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)$@/keymaps/*/.))))
+ @for x in $(KEYMAPS) ; do \
+ printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | awk '{ printf "%-88s", $$0; }'; \
+ LOG=$$($(MAKE) -C $(TOP_DIR)$@ keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+ done
+
+all-keymaps:
+ $(eval KEYMAPS=$(notdir $(patsubst %/.,%,$(wildcard $(TOP_DIR)/keyboard/$(KEYBOARD)/keymaps/*/.))))
+ @for x in $(KEYMAPS) ; do \
+ printf "Compiling $(BOLD)$(KEYBOARD)$(NO_COLOR) with $(BOLD)$$x$(NO_COLOR)" | awk '{ printf "%-88s", $$0; }'; \
+ LOG=$$($(MAKE) keyboard=$(KEYBOARD) keymap=$$x VERBOSE=$(VERBOSE) COLOR=$(COLOR) SILENT=true 2>&1) ; if [ $$? -gt 0 ]; then $(PRINT_ERROR_PLAIN); elif [ "$$LOG" != "" ] ; then $(PRINT_WARNING_PLAIN); else $(PRINT_OK); fi; \
+ done
+
+# Create build directory
+$(shell mkdir $(BUILD_DIR) 2>/dev/null)
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+-include $(shell mkdir $(BUILD_DIR)/.dep 2>/dev/null) $(wildcard $(BUILD_DIR)/.dep/*)
# Listing of phony targets.
-.PHONY : all begin finish end sizebefore sizeafter gccversion \
+.PHONY : all quick begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
clean clean_list debug gdb-config show_path \
-program teensy dfu flip dfu-ee flip-ee dfu-start
+program teensy dfu flip dfu-ee flip-ee dfu-start \
+all-keyboards-defaults all-keyboards all-keymaps
projects / qmk_firmware.git / blobdiff