Merge commit 'f6d56675f9f981c5464f0ca7a1fbb0162154e8c5'

[qmk_firmware.git] / tmk_core / protocol / usb_hid / USB_Host_Shield_2.0 / examples / Bluetooth / PS3SPP / PS3SPP.ino

diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/PS3SPP/PS3SPP.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/PS3SPP/PS3SPP.ino
new file mode 100644 (file)
index 0000000..8f234cb
--- /dev/null
+++ b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/Bluetooth/PS3SPP/PS3SPP.ino
@@ -0,0 +1,162 @@
+/*
+ Example sketch for the Bluetooth library - developed by Kristian Lauszus
+ For more information visit my blog: http://blog.tkjelectronics.dk/ or
+ send me an e-mail:  kristianl@tkjelectronics.com
+
+ This example show how one can combine all the difference Bluetooth services in one single code.
+ Note:
+ You will need a Arduino Mega 1280/2560 to run this sketch,
+ as a normal Arduino (Uno, Duemilanove etc.) doesn't have enough SRAM and FLASH
+ */
+
+#include <PS3BT.h>
+#include <SPP.h>
+#include <usbhub.h>
+
+// Satisfy the IDE, which needs to see the include statment in the ino too.
+#ifdef dobogusinclude
+#include <spi4teensy3.h>
+#include <SPI.h>
+#endif
+
+USB Usb;
+//USBHub Hub1(&Usb); // Some dongles have a hub inside
+
+BTD Btd(&Usb); // You have to create the Bluetooth Dongle instance like so
+
+/* You can create the instances of the bluetooth services in two ways */
+SPP SerialBT(&Btd); // This will set the name to the defaults: "Arduino" and the pin to "0000"
+//SPP SerialBTBT(&Btd,"Lauszus's Arduino","0000"); // You can also set the name and pin like so
+PS3BT PS3(&Btd); // This will just create the instance
+//PS3BT PS3(&Btd, 0x00, 0x15, 0x83, 0x3D, 0x0A, 0x57); // This will also store the bluetooth address - this can be obtained from the dongle when running the sketch
+
+bool firstMessage = true;
+String output = ""; // We will store the data in this string
+
+void setup() {
+  Serial.begin(115200); // This wil lprint the debugging from the libraries
+#if !defined(__MIPSEL__)
+  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
+#endif
+  if (Usb.Init() == -1) {
+    Serial.print(F("\r\nOSC did not start"));
+    while (1); //halt
+  }
+  Serial.print(F("\r\nBluetooth Library Started"));
+  output.reserve(200); // Reserve 200 bytes for the output string
+}
+void loop() {
+  Usb.Task(); // The SPP data is actually not send until this is called, one could call SerialBT.send() directly as well
+
+  if (SerialBT.connected) {
+    if (firstMessage) {
+      firstMessage = false;
+      SerialBT.println(F("Hello from Arduino")); // Send welcome message
+    }
+    if (Serial.available())
+      SerialBT.write(Serial.read());
+    if (SerialBT.available())
+      Serial.write(SerialBT.read());
+  }
+  else
+    firstMessage = true;
+
+  if (PS3.PS3Connected || PS3.PS3NavigationConnected) {
+    output = ""; // Reset output string
+    if (PS3.getAnalogHat(LeftHatX) > 137 || PS3.getAnalogHat(LeftHatX) < 117 || PS3.getAnalogHat(LeftHatY) > 137 || PS3.getAnalogHat(LeftHatY) < 117 || PS3.getAnalogHat(RightHatX) > 137 || PS3.getAnalogHat(RightHatX) < 117 || PS3.getAnalogHat(RightHatY) > 137 || PS3.getAnalogHat(RightHatY) < 117) {
+      output += "LeftHatX: ";
+      output += PS3.getAnalogHat(LeftHatX);
+      output += "\tLeftHatY: ";
+      output += PS3.getAnalogHat(LeftHatY);
+      if (PS3.PS3Connected) { // The Navigation controller only have one joystick
+        output += "\tRightHatX: ";
+        output += PS3.getAnalogHat(RightHatX);
+        output += "\tRightHatY: ";
+        output += PS3.getAnalogHat(RightHatY);
+      }
+    }
+    //Analog button values can be read from almost all buttons
+    if (PS3.getAnalogButton(L2) || PS3.getAnalogButton(R2)) {
+      if (output != "")
+        output += "\r\n";
+      output += "L2: ";
+      output += PS3.getAnalogButton(L2);
+      if (PS3.PS3Connected) {
+        output += "\tR2: ";
+        output += PS3.getAnalogButton(R2);
+      }
+    }
+    if (output != "") {
+      Serial.println(output);
+      if (SerialBT.connected)
+        SerialBT.println(output);
+      output = ""; // Reset output string
+    }
+    if (PS3.getButtonClick(PS)) {
+      output += " - PS";
+      PS3.disconnect();
+    }
+    else {
+      if (PS3.getButtonClick(TRIANGLE))
+        output += " - Traingle";
+      if (PS3.getButtonClick(CIRCLE))
+        output += " - Circle";
+      if (PS3.getButtonClick(CROSS))
+        output += " - Cross";
+      if (PS3.getButtonClick(SQUARE))
+        output += " - Square";
+
+      if (PS3.getButtonClick(UP)) {
+        output += " - Up";
+        if (PS3.PS3Connected) {
+          PS3.setLedOff();
+          PS3.setLedOn(LED4);
+        }
+      }
+      if (PS3.getButtonClick(RIGHT)) {
+        output += " - Right";
+        if (PS3.PS3Connected) {
+          PS3.setLedOff();
+          PS3.setLedOn(LED1);
+        }
+      }
+      if (PS3.getButtonClick(DOWN)) {
+        output += " - Down";
+        if (PS3.PS3Connected) {
+          PS3.setLedOff();
+          PS3.setLedOn(LED2);
+        }
+      }
+      if (PS3.getButtonClick(LEFT)) {
+        output += " - Left";
+        if (PS3.PS3Connected) {
+          PS3.setLedOff();
+          PS3.setLedOn(LED3);
+        }
+      }
+
+      if (PS3.getButtonClick(L1))
+        output += " - L1";
+      if (PS3.getButtonClick(L3))
+        output += " - L3";
+      if (PS3.getButtonClick(R1))
+        output += " - R1";
+      if (PS3.getButtonClick(R3))
+        output += " - R3";
+
+      if (PS3.getButtonClick(SELECT)) {
+        output += " - Select";
+      }
+      if (PS3.getButtonClick(START))
+        output += " - Start";
+
+      if (output != "") {
+        String string = "PS3 Controller" + output;
+        Serial.println(string);
+        if (SerialBT.connected)
+          SerialBT.println(string);
+      }
+    }
+    delay(10);
+  }
+}