#include "descriptor.h"
#include "lufa.h"
+#include "quantum.h"
+
+#ifdef NKRO_ENABLE
+ #include "keycode_config.h"
+
+ extern keymap_config_t keymap_config;
+#endif
+
#ifdef AUDIO_ENABLE
#include <audio.h>
#include "virtser.h"
#endif
+#if (defined(RGB_MIDI) | defined(RGBLIGHT_ANIMATIONS)) & defined(RGBLIGHT_ENABLE)
+ #include "rgblight.h"
+#endif
+
+#ifdef MIDI_ENABLE
+ #include "sysex_tools.h"
+#endif
+
+#ifdef RAW_ENABLE
+ #include "raw_hid.h"
+#endif
+
uint8_t keyboard_idle = 0;
/* 0: Boot Protocol, 1: Report Protocol(default) */
uint8_t keyboard_protocol = 1;
static report_keyboard_t keyboard_report_sent;
#ifdef MIDI_ENABLE
-void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2);
-void usb_get_midi(MidiDevice * device);
-void midi_usb_init(MidiDevice * device);
+static void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2);
+static void usb_get_midi(MidiDevice * device);
+static void midi_usb_init(MidiDevice * device);
#endif
/* Host driver */
};
#endif
+#ifdef RAW_ENABLE
+
+void raw_hid_send( uint8_t *data, uint8_t length )
+{
+ // TODO: implement variable size packet
+ if ( length != RAW_EPSIZE )
+ {
+ return;
+ }
+
+ if (USB_DeviceState != DEVICE_STATE_Configured)
+ {
+ return;
+ }
+
+ // TODO: decide if we allow calls to raw_hid_send() in the middle
+ // of other endpoint usage.
+ uint8_t ep = Endpoint_GetCurrentEndpoint();
+
+ Endpoint_SelectEndpoint(RAW_IN_EPNUM);
+
+ // Check to see if the host is ready to accept another packet
+ if (Endpoint_IsINReady())
+ {
+ // Write data
+ Endpoint_Write_Stream_LE(data, RAW_EPSIZE, NULL);
+ // Finalize the stream transfer to send the last packet
+ Endpoint_ClearIN();
+ }
+
+ Endpoint_SelectEndpoint(ep);
+}
+
+__attribute__ ((weak))
+void raw_hid_receive( uint8_t *data, uint8_t length )
+{
+ // Users should #include "raw_hid.h" in their own code
+ // and implement this function there. Leave this as weak linkage
+ // so users can opt to not handle data coming in.
+}
+
+static void raw_hid_task(void)
+{
+ // Create a temporary buffer to hold the read in data from the host
+ uint8_t data[RAW_EPSIZE];
+ bool data_read = false;
+
+ // Device must be connected and configured for the task to run
+ if (USB_DeviceState != DEVICE_STATE_Configured)
+ return;
+
+ Endpoint_SelectEndpoint(RAW_OUT_EPNUM);
+
+ // Check to see if a packet has been sent from the host
+ if (Endpoint_IsOUTReceived())
+ {
+ // Check to see if the packet contains data
+ if (Endpoint_IsReadWriteAllowed())
+ {
+ /* Read data */
+ Endpoint_Read_Stream_LE(data, sizeof(data), NULL);
+ data_read = true;
+ }
+
+ // Finalize the stream transfer to receive the last packet
+ Endpoint_ClearOUT();
+
+ if ( data_read )
+ {
+ raw_hid_receive( data, sizeof(data) );
+ }
+ }
+}
+#endif
/*******************************************************************************
* Console
#endif
}
+
+
#ifdef CONSOLE_ENABLE
static bool console_flush = false;
#define CONSOLE_FLUSH_SET(b) do { \
Console_Task();
console_flush = false;
}
+
#endif
/** Event handler for the USB_ConfigurationChanged event.
EXTRAKEY_EPSIZE, ENDPOINT_BANK_SINGLE);
#endif
+#ifdef RAW_ENABLE
+ /* Setup Raw HID Report Endpoints */
+ ConfigSuccess &= ENDPOINT_CONFIG(RAW_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
+ RAW_EPSIZE, ENDPOINT_BANK_SINGLE);
+ ConfigSuccess &= ENDPOINT_CONFIG(RAW_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT,
+ RAW_EPSIZE, ENDPOINT_BANK_SINGLE);
+#endif
+
#ifdef CONSOLE_ENABLE
/* Setup Console HID Report Endpoints */
ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
/* Select the Keyboard Report Endpoint */
#ifdef NKRO_ENABLE
- if (keyboard_protocol && keyboard_nkro) {
+ if (keyboard_protocol && keymap_config.nkro) {
/* Report protocol - NKRO */
Endpoint_SelectEndpoint(NKRO_IN_EPNUM);
******************************************************************************/
#ifdef MIDI_ENABLE
-void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2) {
+static void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2) {
MIDI_EventPacket_t event;
event.Data1 = byte0;
event.Data2 = byte1;
USB_USBTask();
}
-void usb_get_midi(MidiDevice * device) {
+static void usb_get_midi(MidiDevice * device) {
MIDI_EventPacket_t event;
while (MIDI_Device_ReceiveEventPacket(&USB_MIDI_Interface, &event)) {
USB_USBTask();
}
-void midi_usb_init(MidiDevice * device){
+static void midi_usb_init(MidiDevice * device){
midi_device_init(device);
midi_device_set_send_func(device, usb_send_func);
midi_device_set_pre_input_process_func(device, usb_get_midi);
- SetupHardware();
+ // SetupHardware();
sei();
}
}
#endif
+ keyboard_task();
+
#ifdef MIDI_ENABLE
midi_device_process(&midi_device);
// MIDI_Task();
#endif
- keyboard_task();
+
+#if defined(RGBLIGHT_ANIMATIONS) & defined(RGBLIGHT_ENABLE)
+ rgblight_task();
+#endif
#ifdef VIRTSER_ENABLE
virtser_task();
CDC_Device_USBTask(&cdc_device);
#endif
+#ifdef RAW_ENABLE
+ raw_hid_task();
+#endif
+
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
USB_USBTask();
#endif
+
}
}
#endif
}
+
void cc_callback(MidiDevice * device,
uint8_t chan, uint8_t num, uint8_t val) {
//sending it back on the next channel
- midi_send_cc(device, (chan + 1) % 16, num, val);
+ // midi_send_cc(device, (chan + 1) % 16, num, val);
}
-void sysex_callback(MidiDevice * device,
- uint16_t start, uint8_t length, uint8_t * data) {
- for (int i = 0; i < length; i++)
- midi_send_cc(device, 15, 0x7F & data[i], 0x7F & (start + i));
+uint8_t midi_buffer[MIDI_SYSEX_BUFFER] = {0};
+
+void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data) {
+ #ifdef API_SYSEX_ENABLE
+ // SEND_STRING("\n");
+ // send_word(start);
+ // SEND_STRING(": ");
+ for (uint8_t place = 0; place < length; place++) {
+ // send_byte(*data);
+ midi_buffer[start + place] = *data;
+ if (*data == 0xF7) {
+ // SEND_STRING("\nRD: ");
+ // for (uint8_t i = 0; i < start + place + 1; i++){
+ // send_byte(midi_buffer[i]);
+ // SEND_STRING(" ");
+ // }
+ uint8_t * decoded = malloc(sizeof(uint8_t) * (sysex_decoded_length(start + place - 4)));
+ uint16_t decode_length = sysex_decode(decoded, midi_buffer + 4, start + place - 4);
+ process_api(decode_length, decoded);
+ }
+ // SEND_STRING(" ");
+ data++;
+ }
+ #endif
}
+
+
#endif
projects / qmk_firmware.git / blobdiff