#include "descriptor.h"
#include "lufa.h"
#include "quantum.h"
+#include <util/atomic.h>
+#include "outputselect.h"
#ifdef NKRO_ENABLE
#include "keycode_config.h"
#endif
#ifdef BLUETOOTH_ENABLE
+ #ifdef MODULE_ADAFRUIT_BLE
+ #include "adafruit_ble.h"
+ #else
#include "bluetooth.h"
+ #endif
#endif
#ifdef VIRTSER_ENABLE
#endif
#if (defined(RGB_MIDI) | defined(RGBLIGHT_ANIMATIONS)) & defined(RGBLIGHT_ENABLE)
- #include "rgblight.h"
+ #include "rgblight.h"
#endif
#ifdef MIDI_ENABLE
#ifdef CONSOLE_ENABLE
static bool console_flush = false;
#define CONSOLE_FLUSH_SET(b) do { \
- uint8_t sreg = SREG; cli(); console_flush = b; SREG = sreg; \
+ ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {\
+ console_flush = b; \
+ } \
} while (0)
// called every 1ms
/*******************************************************************************
* Host driver
-p
******************************************************************************/
static uint8_t keyboard_leds(void)
{
static void send_keyboard(report_keyboard_t *report)
{
+ uint8_t timeout = 255;
+ uint8_t where = where_to_send();
#ifdef BLUETOOTH_ENABLE
- bluefruit_serial_send(0xFD);
- for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) {
+ if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
+ #ifdef MODULE_ADAFRUIT_BLE
+ adafruit_ble_send_keys(report->mods, report->keys, sizeof(report->keys));
+ #elif MODULE_RN42
+ bluefruit_serial_send(0xFD);
+ bluefruit_serial_send(0x09);
+ bluefruit_serial_send(0x01);
+ for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) {
+ bluefruit_serial_send(report->raw[i]);
+ }
+ #else
+ bluefruit_serial_send(0xFD);
+ for (uint8_t i = 0; i < KEYBOARD_EPSIZE; i++) {
bluefruit_serial_send(report->raw[i]);
- }
+ }
+ #endif
+ }
#endif
- uint8_t timeout = 255;
-
- if (USB_DeviceState != DEVICE_STATE_Configured)
- return;
+ if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
+ return;
+ }
/* Select the Keyboard Report Endpoint */
#ifdef NKRO_ENABLE
static void send_mouse(report_mouse_t *report)
{
#ifdef MOUSE_ENABLE
+ uint8_t timeout = 255;
+ uint8_t where = where_to_send();
#ifdef BLUETOOTH_ENABLE
- bluefruit_serial_send(0xFD);
- bluefruit_serial_send(0x00);
- bluefruit_serial_send(0x03);
- bluefruit_serial_send(report->buttons);
- bluefruit_serial_send(report->x);
- bluefruit_serial_send(report->y);
- bluefruit_serial_send(report->v); // should try sending the wheel v here
- bluefruit_serial_send(report->h); // should try sending the wheel h here
- bluefruit_serial_send(0x00);
+ if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
+ #ifdef MODULE_ADAFRUIT_BLE
+ // FIXME: mouse buttons
+ adafruit_ble_send_mouse_move(report->x, report->y, report->v, report->h);
+ #else
+ bluefruit_serial_send(0xFD);
+ bluefruit_serial_send(0x00);
+ bluefruit_serial_send(0x03);
+ bluefruit_serial_send(report->buttons);
+ bluefruit_serial_send(report->x);
+ bluefruit_serial_send(report->y);
+ bluefruit_serial_send(report->v); // should try sending the wheel v here
+ bluefruit_serial_send(report->h); // should try sending the wheel h here
+ bluefruit_serial_send(0x00);
+ #endif
+ }
#endif
- uint8_t timeout = 255;
-
- if (USB_DeviceState != DEVICE_STATE_Configured)
- return;
+ if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
+ return;
+ }
/* Select the Mouse Report Endpoint */
Endpoint_SelectEndpoint(MOUSE_IN_EPNUM);
report_extra_t r = {
.report_id = REPORT_ID_SYSTEM,
- .usage = data
+ .usage = data - SYSTEM_POWER_DOWN + 1
};
Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM);
static void send_consumer(uint16_t data)
{
+ uint8_t timeout = 255;
+ uint8_t where = where_to_send();
#ifdef BLUETOOTH_ENABLE
- static uint16_t last_data = 0;
- if (data == last_data) return;
- last_data = data;
- uint16_t bitmap = CONSUMER2BLUEFRUIT(data);
- bluefruit_serial_send(0xFD);
- bluefruit_serial_send(0x00);
- bluefruit_serial_send(0x02);
- bluefruit_serial_send((bitmap>>8)&0xFF);
- bluefruit_serial_send(bitmap&0xFF);
- bluefruit_serial_send(0x00);
- bluefruit_serial_send(0x00);
- bluefruit_serial_send(0x00);
- bluefruit_serial_send(0x00);
+ if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
+ #ifdef MODULE_ADAFRUIT_BLE
+ adafruit_ble_send_consumer_key(data, 0);
+ #elif MODULE_RN42
+ static uint16_t last_data = 0;
+ if (data == last_data) return;
+ last_data = data;
+ uint16_t bitmap = CONSUMER2RN42(data);
+ bluefruit_serial_send(0xFD);
+ bluefruit_serial_send(0x03);
+ bluefruit_serial_send(0x03);
+ bluefruit_serial_send(bitmap&0xFF);
+ bluefruit_serial_send((bitmap>>8)&0xFF);
+ #else
+ static uint16_t last_data = 0;
+ if (data == last_data) return;
+ last_data = data;
+ uint16_t bitmap = CONSUMER2BLUEFRUIT(data);
+ bluefruit_serial_send(0xFD);
+ bluefruit_serial_send(0x00);
+ bluefruit_serial_send(0x02);
+ bluefruit_serial_send((bitmap>>8)&0xFF);
+ bluefruit_serial_send(bitmap&0xFF);
+ bluefruit_serial_send(0x00);
+ bluefruit_serial_send(0x00);
+ bluefruit_serial_send(0x00);
+ bluefruit_serial_send(0x00);
+ #endif
+ }
#endif
- uint8_t timeout = 255;
-
- if (USB_DeviceState != DEVICE_STATE_Configured)
- return;
+ if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
+ return;
+ }
report_extra_t r = {
.report_id = REPORT_ID_CONSUMER,
uint8_t chan, uint8_t num, uint8_t val);
void sysex_callback(MidiDevice * device,
uint16_t start, uint8_t length, uint8_t * data);
+
+void setup_midi(void)
+{
+#ifdef MIDI_ADVANCED
+ midi_init();
+#endif
+ midi_device_init(&midi_device);
+ midi_device_set_send_func(&midi_device, usb_send_func);
+ midi_device_set_pre_input_process_func(&midi_device, usb_get_midi);
+}
#endif
int main(void) __attribute__ ((weak));
int main(void)
{
-
#ifdef MIDI_ENABLE
- midi_device_init(&midi_device);
- midi_device_set_send_func(&midi_device, usb_send_func);
- midi_device_set_pre_input_process_func(&midi_device, usb_get_midi);
+ setup_midi();
#endif
setup_mcu();
// midi_send_noteoff(&midi_device, 0, 64, 127);
#endif
-#ifdef BLUETOOTH_ENABLE
+#if defined(MODULE_ADAFRUIT_EZKEY) || defined(MODULE_RN42)
serial_init();
#endif
print("Keyboard start.\n");
while (1) {
- #ifndef BLUETOOTH_ENABLE
+ #if !defined(NO_USB_STARTUP_CHECK)
while (USB_DeviceState == DEVICE_STATE_Suspended) {
print("[s]");
suspend_power_down();
#ifdef MIDI_ENABLE
midi_device_process(&midi_device);
- // MIDI_Task();
+#ifdef MIDI_ADVANCED
+ midi_task();
+#endif
#endif
-
+
#if defined(RGBLIGHT_ANIMATIONS) & defined(RGBLIGHT_ENABLE)
rgblight_task();
#endif
+#ifdef MODULE_ADAFRUIT_BLE
+ adafruit_ble_task();
+#endif
+
#ifdef VIRTSER_ENABLE
virtser_task();
CDC_Device_USBTask(&cdc_device);
// midi_send_cc(device, (chan + 1) % 16, num, val);
}
+#ifdef API_SYSEX_ENABLE
uint8_t midi_buffer[MIDI_SYSEX_BUFFER] = {0};
+#endif
void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data) {
#ifdef API_SYSEX_ENABLE
// SEND_STRING("\n");
// send_word(start);
// SEND_STRING(": ");
+ // Don't store the header
+ int16_t pos = start - 4;
for (uint8_t place = 0; place < length; place++) {
// send_byte(*data);
- midi_buffer[start + place] = *data;
- if (*data == 0xF7) {
- // SEND_STRING("\nRD: ");
- // for (uint8_t i = 0; i < start + place + 1; i++){
- // send_byte(midi_buffer[i]);
- // SEND_STRING(" ");
- // }
- uint8_t * decoded = malloc(sizeof(uint8_t) * (sysex_decoded_length(start + place - 4)));
- uint16_t decode_length = sysex_decode(decoded, midi_buffer + 4, start + place - 4);
- process_api(decode_length, decoded);
+ if (pos >= 0) {
+ if (*data == 0xF7) {
+ // SEND_STRING("\nRD: ");
+ // for (uint8_t i = 0; i < start + place + 1; i++){
+ // send_byte(midi_buffer[i]);
+ // SEND_STRING(" ");
+ // }
+ const unsigned decoded_length = sysex_decoded_length(pos);
+ uint8_t decoded[API_SYSEX_MAX_SIZE];
+ sysex_decode(decoded, midi_buffer, pos);
+ process_api(decoded_length, decoded);
+ return;
+ }
+ else if (pos >= MIDI_SYSEX_BUFFER) {
+ return;
+ }
+ midi_buffer[pos] = *data;
}
// SEND_STRING(" ");
data++;
+ pos++;
}
#endif
}
projects / qmk_firmware.git / blobdiff