# include "usbdrv.h"
#endif
+#ifdef AUDIO_ENABLE
+ #include "audio.h"
+#endif /* AUDIO_ENABLE */
+
static bool command_common(uint8_t code);
static void command_common_help(void);
STR(MAGIC_KEY_VERSION ) ": Version\n"
STR(MAGIC_KEY_STATUS ) ": Status\n"
STR(MAGIC_KEY_CONSOLE ) ": Activate Console Mode\n"
-
+
#if MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
STR(MAGIC_KEY_LAYER0 ) ": Switch to Layer 0\n"
STR(MAGIC_KEY_LAYER1 ) ": Switch to Layer 1\n"
STR(MAGIC_KEY_LAYER9 ) ": Switch to Layer 9\n"
#endif
-#if MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+#if MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
"F1-F10: Switch to Layer 0-9 (F10 = L0)\n"
#endif
-#if MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+#if MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
"0-9: Switch to Layer 0-9\n"
#endif
#ifdef BOOTMAGIC_ENABLE
static void print_eeconfig(void)
{
+#ifndef NO_PRINT
print("default_layer: "); print_dec(eeconfig_read_default_layer()); print("\n");
debug_config_t dc;
print("backlight_config.raw: "); print_hex8(bc.raw); print("\n");
print(".enable: "); print_dec(bc.enable); print("\n");
print(".level: "); print_dec(bc.level); print("\n");
-#endif
+#endif /* BACKLIGHT_ENABLE */
+
+#endif /* !NO_PRINT */
+
}
-#endif
+#endif /* BOOTMAGIC_ENABLE */
static bool command_common(uint8_t code)
{
#ifdef BOOTMAGIC_ENABLE
// print stored eeprom config
- case MAGIC_KC(MAGIC_KEY_EEPROM):
+ case MAGIC_KC(MAGIC_KEY_EEPROM):
print("eeconfig:\n");
print_eeconfig();
break;
case MAGIC_KC(MAGIC_KEY_BOOTLOADER):
clear_keyboard(); // clear to prevent stuck keys
print("\n\nJumping to bootloader... ");
- _delay_ms(1000);
+ #ifdef AUDIO_ENABLE
+ stop_all_notes();
+ play_goodbye_tone();
+ #else
+ _delay_ms(1000);
+ #endif
bootloader_jump(); // not return
break;
break;
// debug matrix toggle
- case MAGIC_KC(MAGIC_KEY_DEBUG_MATRIX):
+ case MAGIC_KC(MAGIC_KEY_DEBUG_MATRIX):
debug_matrix = !debug_matrix;
if (debug_matrix) {
print("\nmatrix: on\n");
break;
// debug keyboard toggle
- case MAGIC_KC(MAGIC_KEY_DEBUG_KBD):
+ case MAGIC_KC(MAGIC_KEY_DEBUG_KBD):
debug_keyboard = !debug_keyboard;
if (debug_keyboard) {
print("\nkeyboard: on\n");
static void mousekey_param_print(void)
{
+#ifndef NO_PRINT
print("\n\t- Values -\n");
print("1: delay(*10ms): "); pdec(mk_delay); print("\n");
print("2: interval(ms): "); pdec(mk_interval); print("\n");
print("4: time_to_max: "); pdec(mk_time_to_max); print("\n");
print("5: wheel_max_speed: "); pdec(mk_wheel_max_speed); print("\n");
print("6: wheel_time_to_max: "); pdec(mk_wheel_time_to_max); print("\n");
+#endif /* !NO_PRINT */
+
}
//#define PRINT_SET_VAL(v) print(#v " = "); print_dec(v); print("\n");
"pgdown: -10\n"
"\n"
"speed = delta * max_speed * (repeat / time_to_max)\n");
- xprintf("where delta: cursor=%d, wheel=%d\n"
+ xprintf("where delta: cursor=%d, wheel=%d\n"
"See http://en.wikipedia.org/wiki/Mouse_keys\n", MOUSEKEY_MOVE_DELTA, MOUSEKEY_WHEEL_DELTA);
}