###| CMAKE Kiibohd Controller Source Configurator |###
#
-# Written by Jacob Alexander in 2011 for the Kiibohd Controller
+# Written by Jacob Alexander in 2011-2014 for the Kiibohd Controller
#
# Released into the Public Domain
#
# Project Modules
#
+#| Note: This is the only section you probably want to modify
#| Each module is defined by it's own folder (e.g. Scan/Matrix represents the "Matrix" module)
#| All of the modules must be specified, as they generate the sources list of files to compile
#| Any modifications to this file will cause a complete rebuild of the project
-#| Please the {Scan,Macro,USB,Debug}/module.txt for information on the modules and how to create new ones
+#| Please look at the {Scan,Macro,USB,Debug}/module.txt for information on the modules and how to create new ones
##| Deals with acquiring the keypress information and turning it into a key index
-set( ScanModule "matrix" )
+set( ScanModule "SKM67001" )
-##| Uses the key index and potentially applies special conditions to it, mapping it to a usb key code
-set( MacroModule "basic" )
+##| Provides the mapping functions for DefaultMap and handles any macro processing before sending to the OutputModule
+set( MacroModule "PartialMap" )
##| Sends the current list of usb key codes through USB HID
-set( USBModule "pjrc" )
+set( OutputModule "pjrcUSB" )
##| Debugging source to use, each module has it's own set of defines that it sets
-set( DebugModule "basic" )
+set( DebugModule "full" )
+
+
+
+###
+# Keymap Configuration
+#
+
+##| If there are multiple DefaultMaps, it is defined here. If, the specified DefaultMap is not found, defaultMap.h is used.
+set( DefaultMap "kishsaver" )
+
+##| PartialMap combined keymap layering. The first keymap has the "least" precedence.
+set( CombinedMap colemak capslock2ctrl )
+
+##| ParitalMaps available on top of the CombinedMap. If there are input conflicts, the last PartialMap takes precedence.
+set( PartialMaps hhkbnav kbdctrl )
+
+##| MacroSets define extra capabilities that are not provided by the Scan or Output modules. Last MacroSet takes precedence.
+set( MacroSets retype )
+
+
+###
+# Module Overrides (Used in the buildall.bash script)
+#
+if ( ( DEFINED ScanModuleOverride ) AND ( EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/Scan/${ScanModuleOverride} ) )
+ set( ScanModule ${ScanModuleOverride} )
+endif ()
###
# Path Setup
-#
-set( ScanModulePath "Scan/${ScanModule}" )
-set( MacroModulePath "Macro/${MacroModule}" )
-set( USBModulePath "USB/${USBModule}" )
-set( DebugModulePath "Debug/${DebugModule}" )
+#
+set( ScanModulePath "Scan/${ScanModule}" )
+set( MacroModulePath "Macro/${MacroModule}" )
+set( OutputModulePath "Output/${OutputModule}" )
+set( DebugModulePath "Debug/${DebugModule}" )
+#| Top-level directory adjustment
+set( HEAD_DIR "${CMAKE_CURRENT_SOURCE_DIR}" )
+
+
+
+###
+# Module Check Function
+#
+
+#| Usage:
+#| PathPrepend( ModulePath <ListOfFamiliesSupported> )
+#| Uses the ${COMPILER_FAMILY} variable
+function( ModuleCompatibility ModulePath )
+ foreach( mod_var ${ARGN} )
+ if ( ${mod_var} STREQUAL ${COMPILER_FAMILY} )
+ # Module found, no need to scan further
+ return()
+ endif ()
+ endforeach()
+
+ message( FATAL_ERROR "${ModulePath} does not support the ${COMPILER_FAMILY} family..." )
+endfunction()
#| Additional options, usually define settings
add_definitions()
-#| Include path for each of the modules TODO Fixme!! (../)
-add_definitions("
- -I../${ScanModulePath}
- -I../${MacroModulePath}
- -I../${USBModulePath}
- -I../${DebugModulePath}
-")
+#| Include path for each of the modules
+add_definitions(
+ -I${HEAD_DIR}/${ScanModulePath}
+ -I${HEAD_DIR}/${MacroModulePath}
+ -I${HEAD_DIR}/${OutputModulePath}
+ -I${HEAD_DIR}/${DebugModulePath}
+)
+
# Loop through items
foreach( item ${ARGN} )
+ # Set the path
set( tmpSource ${tmpSource} "${SourcesPath}/${item}" )
- endforeach( item )
+ endforeach()
# Finalize by writing the new list back over the old one
set( ${Output} ${tmpSource} )
-endmacro( PathPrepend )
+endmacro()
#| Scan Module
-include( "${ScanModulePath}/setup.cmake" )
-PathPrepend( SCAN_SRCS ${ScanModulePath} ${SCAN_SRCS} )
+include ( "${ScanModulePath}/setup.cmake" )
+PathPrepend( SCAN_SRCS ${ScanModulePath} ${SCAN_SRCS} )
#| Macro Module
-include( "${MacroModulePath}/setup.cmake" )
+include ( "${MacroModulePath}/setup.cmake" )
PathPrepend( MACRO_SRCS ${MacroModulePath} ${MACRO_SRCS} )
-#| USB Module
-include( "${USBModulePath}/setup.cmake" )
-PathPrepend( USB_SRCS ${USBModulePath} ${USB_SRCS} )
+#| Output Module
+include ( "${OutputModulePath}/setup.cmake" )
+PathPrepend( OUTPUT_SRCS ${OutputModulePath} ${OUTPUT_SRCS} )
#| Debugging Module
-include( "${DebugModulePath}/setup.cmake" )
+include ( "${DebugModulePath}/setup.cmake" )
PathPrepend( DEBUG_SRCS ${DebugModulePath} ${DEBUG_SRCS} )
+#| Default Map
+# TODO Add support for different defaultMaps
+configure_file( "${ScanModulePath}/defaultMap.h" defaultMap.h )
+
+
#| Print list of all module sources
-message( STATUS "Detected Scan Module Source Files:
-${SCAN_SRCS}")
-message( STATUS "Detected Macro Module Source Files:
-${MACRO_SRCS}")
-message( STATUS "Detected USB Module Source Files:
-${USB_SRCS}")
-message( STATUS "Detected Debug Module Source Files:
-${DEBUG_SRCS}")
+message( STATUS "Detected Scan Module Source Files:" )
+message( "${SCAN_SRCS}" )
+message( STATUS "Detected Macro Module Source Files:" )
+message( "${MACRO_SRCS}" )
+message( STATUS "Detected Output Module Source Files:" )
+message( "${OUTPUT_SRCS}" )
+message( STATUS "Detected Debug Module Source Files:" )
+message( "${DEBUG_SRCS}" )
+
+
+
+###
+# Generate USB Defines
+#
+
+#| Manufacturer name
+set( MANUFACTURER "Kiibohd" )
+
+
+#| Serial Number
+#| Attempt to call Git to get the branch, last commit date, and whether code modified since last commit
+
+#| Modified
+#| Takes a bit of work to extract the "M " using CMake, and not using it if there are no modifications
+execute_process( COMMAND git status -s -uno --porcelain
+ WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}
+ OUTPUT_VARIABLE Git_Modified_INFO
+ ERROR_QUIET
+ OUTPUT_STRIP_TRAILING_WHITESPACE
+)
+string( LENGTH "${Git_Modified_INFO}" Git_Modified_LENGTH )
+set( Git_Modified_Status "Clean" )
+if ( ${Git_Modified_LENGTH} GREATER 2 )
+ string( SUBSTRING "${Git_Modified_INFO}" 1 2 Git_Modified_Flag_INFO )
+ set( Git_Modified_Status "Dirty" )
+endif ()
+
+#| Branch
+execute_process( COMMAND git rev-parse --abbrev-ref HEAD
+ WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}
+ OUTPUT_VARIABLE Git_Branch_INFO
+ ERROR_QUIET
+ OUTPUT_STRIP_TRAILING_WHITESPACE
+)
+
+#| Date
+execute_process( COMMAND git show -s --format=%ci
+ WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}
+ OUTPUT_VARIABLE Git_Date_INFO
+ RESULT_VARIABLE Git_RETURN
+ ERROR_QUIET
+ OUTPUT_STRIP_TRAILING_WHITESPACE
+)
+
+#| Commit Author and Email
+execute_process( COMMAND git show -s --format="%cn <%ce>"
+ WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}
+ OUTPUT_VARIABLE Git_Commit_Author
+ RESULT_VARIABLE Git_RETURN
+ ERROR_QUIET
+ OUTPUT_STRIP_TRAILING_WHITESPACE
+)
+
+#| Commit Revision
+execute_process( COMMAND git show -s --format=%H
+ WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}
+ OUTPUT_VARIABLE Git_Commit_Revision
+ RESULT_VARIABLE Git_RETURN
+ ERROR_QUIET
+ OUTPUT_STRIP_TRAILING_WHITESPACE
+)
+
+#| Origin URL
+execute_process( COMMAND git config --get remote.origin.url
+ WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}
+ OUTPUT_VARIABLE Git_Origin_URL
+ RESULT_VARIABLE Git_RETURN
+ ERROR_QUIET
+ OUTPUT_STRIP_TRAILING_WHITESPACE
+)
+
+#| Date Macro
+macro ( dateNow RESULT )
+ if ( WIN32 )
+ execute_process( COMMAND "cmd" " /C date /T" OUTPUT_VARIABLE ${RESULT} OUTPUT_STRIP_TRAILING_WHITESPACE )
+ elseif ( UNIX )
+ execute_process( COMMAND "date" "+%Y-%m-%d %T %z" OUTPUT_VARIABLE ${RESULT} OUTPUT_STRIP_TRAILING_WHITESPACE )
+ else ()
+ message( send_error "date not implemented" )
+ set( ${RESULT} 000000 )
+ endif ()
+endmacro (dateNow)
+dateNow( Build_Date )
+
+
+#| Only use Git variables if we were successful in calling the commands
+if ( ${Git_RETURN} EQUAL 0 )
+ set( GitLastCommitDate "${Git_Modified_Flag_INFO}${Git_Branch_INFO} - ${Git_Date_INFO}" )
+else ()
+ # TODO Figure out a good way of finding the current branch + commit date + modified
+ set( GitLastCommitDate "Pft...Windows Build" )
+endif ()
+
+
+#| Uses CMake variables to include as defines
+#| Primarily for USB configuration
+configure_file( ${CMAKE_CURRENT_SOURCE_DIR}/Lib/_buildvars.h buildvars.h )
projects / kiibohd-controller.git / blobdiff