#
# make extcoff = Convert ELF to AVR Extended COFF.
#
-# make program = Download the hex file to the device, using avrdude.
-# Please customize the avrdude settings below first!
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
CFLAGS += -funsigned-char
CFLAGS += -funsigned-bitfields
CFLAGS += -ffunction-sections
+CFLAGS += -fno-inline-small-functions
CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
+CFLAGS += -fno-strict-aliasing
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
#CFLAGS += -mshort-calls
CFLAGS += -Wa,-adhlns=$(@:%.o=%.lst)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
CFLAGS += $(CSTANDARD)
-CFLAGS += -include $(CONFIG_H)
+ifdef CONFIG_H
+ CFLAGS += -include $(CONFIG_H)
+endif
#---------------- Compiler Options C++ ----------------
CPPFLAGS += -fpack-struct
CPPFLAGS += -fshort-enums
CPPFLAGS += -fno-exceptions
+CPPFLAGS += -ffunction-sections
+CPPFLAGS += -fdata-sections
+# to supress "warning: only initialized variables can be placed into program memory area"
+CPPFLAGS += -w
CPPFLAGS += -Wall
CPPFLAGS += -Wundef
#CPPFLAGS += -mshort-calls
CPPFLAGS += -Wa,-adhlns=$(@:%.o=%.lst)
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
#CPPFLAGS += $(CSTANDARD)
-CPPFLAGS += -include $(CONFIG_H)
+ifdef CONFIG_H
+ CPPFLAGS += -include $(CONFIG_H)
+endif
#---------------- Assembler Options ----------------
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
# dump that will be displayed for a given single line of source input.
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100
-ASFLAGS += -include $(CONFIG_H)
+ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+ifdef CONFIG_H
+ ASFLAGS += -include $(CONFIG_H)
+endif
#---------------- Library Options ----------------
# Compiler flags to generate dependency files.
-GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+GENDEPFLAGS = -MMD -MP -MF .dep/$(subst /,_,$@).d
# Combine all necessary flags and optional flags.
# Add target processor to flags.
-# You can give EXTRAFLAGS at 'make' command line.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
+# You can give extra flags at 'make' command line like: make EXTRAFLAGS=-DFOO=bar
+ALL_CFLAGS = -mmcu=$(MCU) $(CFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)
program: $(TARGET).hex $(TARGET).eep
$(PROGRAM_CMD)
+teensy: $(TARGET).hex
+ teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+flip: $(TARGET).hex
+ batchisp -hardware usb -device $(MCU) -operation erase f
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
+ batchisp -hardware usb -device $(MCU) -operation start reset 0
+
+dfu: $(TARGET).hex
+ dfu-programmer $(MCU) erase
+ dfu-programmer $(MCU) flash $(TARGET).hex
+ dfu-programmer $(MCU) reset
+
+dfu-start:
+ dfu-programmer $(MCU) reset
+ dfu-programmer $(MCU) start
+
+flip-ee: $(TARGET).hex $(TARGET).eep
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
+ batchisp -hardware usb -device $(MCU) -operation start reset 0
+ $(REMOVE) $(TARGET)eep.hex
+
+dfu-ee: $(TARGET).hex $(TARGET).eep
+ dfu-programmer $(MCU) eeprom-flash $(TARGET).eep
+ dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
# Compile: create object files from C source files.
$(OBJDIR)/%.o : %.c
@echo
+ mkdir -p $(@D)
@echo $(MSG_COMPILING) $<
$(CC) -c $(ALL_CFLAGS) $< -o $@
# Compile: create object files from C++ source files.
$(OBJDIR)/%.o : %.cpp
@echo
+ mkdir -p $(@D)
@echo $(MSG_COMPILING_CPP) $<
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
# Create preprocessed source for use in sending a bug report.
%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+ $(CC) -E -mmcu=$(MCU) $(CFLAGS) $< -o $@
# Target: clean project.
$(REMOVE) $(OBJ:.o=.s)
$(REMOVE) $(OBJ:.o=.i)
$(REMOVE) -r .dep
- $(REMOVEDIR) $(OBJDIR)
+ $(REMOVE) -r $(OBJDIR)
+
+show_path:
+ @echo VPATH=$(VPATH)
+ @echo SRC=$(SRC)
# Create object files directory
# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff \
-clean clean_list program debug gdb-config
-
+clean clean_list debug gdb-config show_path \
+program teensy dfu flip dfu-ee flip-ee dfu-start