//**********************************************************************************************************************
-RareFactSharedCommand::RareFactSharedCommand(){
+RareFactSharedCommand::RareFactSharedCommand(string option){
try {
globaldata = GlobalData::getInstance();
- string fileNameRoot;
- fileNameRoot = getRootName(globaldata->inputFileName);
- format = globaldata->getFormat();
- validCalculator = new ValidCalculators();
+
+ abort = false;
+ allLines = 1;
+ lines.clear();
+ labels.clear();
+ Estimators.clear();
+ Groups.clear();
- int i;
- for (i=0; i<globaldata->Estimators.size(); i++) {
- if (validCalculator->isValidCalculator("sharedrarefaction", globaldata->Estimators[i]) == true) {
- if (globaldata->Estimators[i] == "sharedobserved") {
- rDisplays.push_back(new RareDisplay(new SharedSobs(), new SharedThreeColumnFile(fileNameRoot+"shared.rarefaction", "")));
- }else if (globaldata->Estimators[i] == "sharednseqs") {
- rDisplays.push_back(new RareDisplay(new SharedNSeqs(), new SharedThreeColumnFile(fileNameRoot+"shared.r_nseqs", "")));
- }
+ //allow user to run help
+ if(option == "help") { validCalculator = new ValidCalculators(); help(); abort = true; }
+
+ else {
+ //valid paramters for this command
+ string Array[] = {"iters","line","label","calc","groups", "jumble"};
+ vector<string> myArray (Array, Array+(sizeof(Array)/sizeof(string)));
+
+ OptionParser parser(option);
+ map<string,string> parameters = parser.getParameters();
+
+ ValidParameters validParameter;
+
+ //check to make sure all parameters are valid for command
+ for (map<string,string>::iterator it = parameters.begin(); it != parameters.end(); it++) {
+ if (validParameter.isValidParameter(it->first, myArray, it->second) != true) { abort = true; }
+ }
+
+ //make sure the user has already run the read.otu command
+ if (globaldata->getSharedFile() == "") {
+ if (globaldata->getListFile() == "") { mothurOut("You must read a list and a group, or a shared before you can use the collect.shared command."); mothurOutEndLine(); abort = true; }
+ else if (globaldata->getGroupFile() == "") { mothurOut("You must read a list and a group, or a shared before you can use the collect.shared command."); mothurOutEndLine(); abort = true; }
+ }
+
+ //check for optional parameter and set defaults
+ // ...at some point should added some additional type checking...
+ line = validParameter.validFile(parameters, "line", false);
+ if (line == "not found") { line = ""; }
+ else {
+ if(line != "all") { splitAtDash(line, lines); allLines = 0; }
+ else { allLines = 1; }
+ }
+
+ label = validParameter.validFile(parameters, "label", false);
+ if (label == "not found") { label = ""; }
+ else {
+ if(label != "all") { splitAtDash(label, labels); allLines = 0; }
+ else { allLines = 1; }
+ }
+
+ //make sure user did not use both the line and label parameters
+ if ((line != "") && (label != "")) { mothurOut("You cannot use both the line and label parameters at the same time. "); mothurOutEndLine(); abort = true; }
+ //if the user has not specified any line or labels use the ones from read.otu
+ else if((line == "") && (label == "")) {
+ allLines = globaldata->allLines;
+ labels = globaldata->labels;
+ lines = globaldata->lines;
+ }
+
+ calc = validParameter.validFile(parameters, "calc", false);
+ if (calc == "not found") { calc = "sharedobserved"; }
+ else {
+ if (calc == "default") { calc = "sharedobserved"; }
}
+ splitAtDash(calc, Estimators);
+
+ groups = validParameter.validFile(parameters, "groups", false);
+ if (groups == "not found") { groups = ""; }
+ else {
+ splitAtDash(groups, Groups);
+ }
+ globaldata->Groups = Groups;
+
+ string temp;
+ temp = validParameter.validFile(parameters, "iters", false); if (temp == "not found") { temp = "1000"; }
+ convert(temp, nIters);
+
+ temp = validParameter.validFile(parameters, "jumble", false); if (temp == "not found") { temp = "T"; }
+ if (isTrue(temp)) { jumble = true; }
+ else { jumble = false; }
+ globaldata->jumble = jumble;
+
+ if (abort == false) {
+
+ string fileNameRoot = getRootName(globaldata->inputFileName);
+// format = globaldata->getFormat();
+
+
+ validCalculator = new ValidCalculators();
+
+ for (int i=0; i<Estimators.size(); i++) {
+ if (validCalculator->isValidCalculator("sharedrarefaction", Estimators[i]) == true) {
+ if (Estimators[i] == "sharedobserved") {
+ rDisplays.push_back(new RareDisplay(new SharedSobs(), new SharedThreeColumnFile(fileNameRoot+"shared.rarefaction", "")));
+ }else if (Estimators[i] == "sharednseqs") {
+ rDisplays.push_back(new RareDisplay(new SharedNSeqs(), new SharedThreeColumnFile(fileNameRoot+"shared.r_nseqs", "")));
+ }
+ }
+ }
+ }
+
}
-
- //reset calc for next command
- globaldata->setCalc("");
}
catch(exception& e) {
- cout << "Standard Error: " << e.what() << " has occurred in the RareFactSharedCommand class Function RareFactSharedCommand. Please contact Pat Schloss at pschloss@microbio.umass.edu." << "\n";
+ errorOut(e, "RareFactSharedCommand", "RareFactSharedCommand");
exit(1);
}
- catch(...) {
- cout << "An unknown error has occurred in the RareFactSharedCommand class function RareFactSharedCommand. Please contact Pat Schloss at pschloss@microbio.umass.edu." << "\n";
+}
+
+//**********************************************************************************************************************
+
+void RareFactSharedCommand::help(){
+ try {
+ mothurOut("The rarefaction.shared command can only be executed after a successful read.otu command.\n");
+ mothurOut("The rarefaction.shared command parameters are label, line, iters, groups, jumble and calc. No parameters are required, but you may not use \n");
+ mothurOut("both the line and label parameters at the same time. The rarefaction command should be in the following format: \n");
+ mothurOut("rarefaction.shared(label=yourLabel, line=yourLines, iters=yourIters, calc=yourEstimators, jumble=yourJumble, groups=yourGroups).\n");
+ mothurOut("Example rarefaction.shared(label=unique-.01-.03, line=0-5-10, iters=10000, groups=B-C, jumble=T, calc=sharedobserved).\n");
+ mothurOut("The default values for iters is 1000, freq is 100, and calc is sharedobserved which calculates the shared rarefaction curve for the observed richness.\n");
+ mothurOut("The default value for groups is all the groups in your groupfile, and jumble is true.\n");
+ validCalculator->printCalc("sharedrarefaction", cout);
+ mothurOut("The label and line parameters are used to analyze specific lines in your input.\n");
+ mothurOut("The groups parameter allows you to specify which of the groups in your groupfile you would like analyzed. You must enter at least 2 valid groups.\n");
+ mothurOut("Note: No spaces between parameter labels (i.e. freq), '=' and parameters (i.e.yourFreq).\n\n");
+ }
+ catch(exception& e) {
+ errorOut(e, "RareFactSharedCommand", "help");
exit(1);
- }
-
+ }
}
//**********************************************************************************************************************
RareFactSharedCommand::~RareFactSharedCommand(){
- delete input;
- delete rCurve;
- delete read;
+ if (abort == false) {
+ delete input; globaldata->ginput = NULL;
+ delete read;
+ delete validCalculator;
+ }
}
//**********************************************************************************************************************
int RareFactSharedCommand::execute(){
try {
+
+ if (abort == true) { return 0; }
+
int count = 1;
//if the users entered no valid calculators don't execute command
input = globaldata->ginput;
lookup = input->getSharedRAbundVectors();
-
+ string lastLabel = lookup[0]->getLabel();
+
if (lookup.size() < 2) {
- cout << "I cannot run the command without at least 2 valid groups.";
+ mothurOut("I cannot run the command without at least 2 valid groups.");
for (int i = 0; i < lookup.size(); i++) { delete lookup[i]; }
return 0;
}
-
- while(lookup[0] != NULL){
-
- if(globaldata->allLines == 1 || globaldata->lines.count(count) == 1 || globaldata->labels.count(lookup[0]->getLabel()) == 1){
- //create collectors curve
+ //if the users enters label "0.06" and there is no "0.06" in their file use the next lowest label.
+ set<string> processedLabels;
+ set<string> userLabels = labels;
+ set<int> userLines = lines;
+
+ //as long as you are not at the end of the file or done wih the lines you want
+ while((lookup[0] != NULL) && ((allLines == 1) || (userLabels.size() != 0) || (userLines.size() != 0))) {
+
+ if(allLines == 1 || lines.count(count) == 1 || labels.count(lookup[0]->getLabel()) == 1){
+
rCurve = new Rarefact(lookup, rDisplays);
- convert(globaldata->getFreq(), freq);
- convert(globaldata->getIters(), nIters);
rCurve->getSharedCurve(freq, nIters);
-
delete rCurve;
- cout << lookup[0]->getLabel() << '\t' << count << endl;
+ mothurOut(lookup[0]->getLabel() + "\t" + toString(count)); mothurOutEndLine();
+ processedLabels.insert(lookup[0]->getLabel());
+ userLabels.erase(lookup[0]->getLabel());
+ userLines.erase(count);
}
- //prevent memory leak
- for (int i = 0; i < lookup.size(); i++) { delete lookup[i]; }
+ if ((anyLabelsToProcess(lookup[0]->getLabel(), userLabels, "") == true) && (processedLabels.count(lastLabel) != 1)) {
+ for (int i = 0; i < lookup.size(); i++) { delete lookup[i]; }
+ lookup = input->getSharedRAbundVectors(lastLabel);
+
+ mothurOut(lookup[0]->getLabel() + "\t" + toString(count)); mothurOutEndLine();
+ rCurve = new Rarefact(lookup, rDisplays);
+ rCurve->getSharedCurve(freq, nIters);
+ delete rCurve;
+
+ processedLabels.insert(lookup[0]->getLabel());
+ userLabels.erase(lookup[0]->getLabel());
+ }
+
+ lastLabel = lookup[0]->getLabel();
+
//get next line to process
+ for (int i = 0; i < lookup.size(); i++) { delete lookup[i]; }
lookup = input->getSharedRAbundVectors();
count++;
}
-
+
+ //output error messages about any remaining user labels
+ set<string>::iterator it;
+ bool needToRun = false;
+ for (it = userLabels.begin(); it != userLabels.end(); it++) {
+ mothurOut("Your file does not include the label " + *it);
+ if (processedLabels.count(lastLabel) != 1) {
+ mothurOut(". I will use " + lastLabel + "."); mothurOutEndLine();
+ needToRun = true;
+ }else {
+ mothurOut(". Please refer to " + lastLabel + "."); mothurOutEndLine();
+ }
+ }
+
+ //run last line if you need to
+ if (needToRun == true) {
+ for (int i = 0; i < lookup.size(); i++) { delete lookup[i]; }
+ lookup = input->getSharedRAbundVectors(lastLabel);
+
+ mothurOut(lookup[0]->getLabel() + "\t" + toString(count)); mothurOutEndLine();
+ rCurve = new Rarefact(lookup, rDisplays);
+ rCurve->getSharedCurve(freq, nIters);
+ delete rCurve;
+ for (int i = 0; i < lookup.size(); i++) { delete lookup[i]; }
+ }
+
for(int i=0;i<rDisplays.size();i++){ delete rDisplays[i]; }
//reset groups parameter
- globaldata->Groups.clear(); globaldata->setGroups("");
+ globaldata->Groups.clear();
return 0;
}
catch(exception& e) {
- cout << "Standard Error: " << e.what() << " has occurred in the RareFactSharedCommand class Function execute. Please contact Pat Schloss at pschloss@microbio.umass.edu." << "\n";
+ errorOut(e, "RareFactSharedCommand", "execute");
exit(1);
}
- catch(...) {
- cout << "An unknown error has occurred in the RareFactSharedCommand class function execute. Please contact Pat Schloss at pschloss@microbio.umass.edu." << "\n";
- exit(1);
- }
}