-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/power.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <avr/eeprom.h>
#include "split_util.h"
#include "matrix.h"
#include "keyboard.h"
#include "config.h"
#include "timer.h"
#include "split_flags.h"
+#include "quantum.h"
-#ifdef RGBLIGHT_ENABLE
-# include "rgblight.h"
+#ifdef EE_HANDS
+# include "tmk_core/common/eeprom.h"
#endif
+
#ifdef BACKLIGHT_ENABLE
# include "backlight.h"
#endif
-#ifdef SPLIT_HAND_PIN
-# include "pincontrol.h"
-#endif
-
#if defined(USE_I2C) || defined(EH)
# include "i2c.h"
-#else
-# include "serial.h"
#endif
volatile bool isLeftHand = true;
static void setup_handedness(void) {
#ifdef SPLIT_HAND_PIN
// Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
- pinMode(SPLIT_HAND_PIN, PinDirectionInput);
- isLeftHand = digitalRead(SPLIT_HAND_PIN);
+ setPinInput(SPLIT_HAND_PIN);
+ isLeftHand = readPin(SPLIT_HAND_PIN);
#else
#ifdef EE_HANDS
isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
#else
- // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
- #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
+ #ifdef MASTER_RIGHT
isLeftHand = !has_usb();
#else
isLeftHand = has_usb();
}
void keyboard_slave_loop(void) {
- // Disable JTAG since we skip calling keyboard_init() on the slave side
- // Future fix will possible call keyboard_init() on the slave to remove this need
- disable_JTAG();
-
matrix_init();
-
+
//Init RGB
#ifdef RGBLIGHT_ENABLE
rgblight_init();
while (1) {
// Matrix Slave Scan
matrix_slave_scan();
-
+
// Read Backlight Info
#ifdef BACKLIGHT_ENABLE
#ifdef USE_I2C
BACKLIT_DIRTY = false;
}
#else // USE_SERIAL
- backlight_set(serial_master_buffer[SERIAL_BACKLIT_START]);
+ backlight_set(serial_m2s_buffer.backlight_level);
#endif
#endif
// Read RGB Info
// Disable interupts (RGB data is big)
cli();
// Create new DWORD for RGB data
- uint32_t dword;
-
+ uint32_t dword;
+
// Fill the new DWORD with the data that was sent over
uint8_t *dword_dat = (uint8_t *)(&dword);
for (int i = 0; i < 4; i++) {
dword_dat[i] = i2c_slave_buffer[I2C_RGB_START+i];
}
-
+
// Update the RGB now with the new data and set RGB_DIRTY to false
rgblight_update_dword(dword);
RGB_DIRTY = false;
sei();
}
#else // USE_SERIAL
+ #ifdef RGBLIGHT_SPLIT
// Add serial implementation for RGB here
+ #endif
#endif
#endif
}
keyboard_slave_loop();
}
}
-
-// Temporary code to disable JTAG on the slave board
-void disable_JTAG(void) {
- /* Copied from tmk_core/common/keybaord.c */
- // To use PORTF disable JTAG with writing JTD bit twice within four cycles.
- #if (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega32U4__))
- MCUCR |= _BV(JTD);
- MCUCR |= _BV(JTD);
- #endif
-}