The DIM_CURVE is used only on brightness/value and on saturation (inverted).
This looks the most natural.
*/
- uint8_t r, g, b;
+ uint8_t r = 0, g = 0, b = 0;
val = pgm_read_byte(&DIM_CURVE[val]);
sat = 255 - pgm_read_byte(&DIM_CURVE[255 - sat]);
}
eeconfig_debug_rgblight(); // display current eeprom values
- rgblight_timer_init(); // setup the timer
+ #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER)
+ rgblight_timer_init(); // setup the timer
+ #endif
if (rgblight_config.enable) {
rgblight_mode(rgblight_config.mode);
}
void rgblight_increase(void) {
- uint8_t mode;
+ uint8_t mode = 0;
if (rgblight_config.mode < RGBLIGHT_MODES) {
mode = rgblight_config.mode + 1;
}
}
void rgblight_decrease(void) {
- uint8_t mode;
+ uint8_t mode = 0;
if (rgblight_config.mode > 1) { //mode will never < 1, if mode is less than 1, eeprom need to be initialized.
mode = rgblight_config.mode-1;
}
}
void rgblight_step(void) {
- uint8_t mode;
+ uint8_t mode = 0;
mode = rgblight_config.mode + 1;
if (mode > RGBLIGHT_MODES) {
mode = 1;
rgblight_config.mode = mode;
}
eeconfig_update_rgblight(rgblight_config.raw);
- dprintf("rgblight mode: %u\n", rgblight_config.mode);
+ xprintf("rgblight mode: %u\n", rgblight_config.mode);
if (rgblight_config.mode == 1) {
- rgblight_timer_disable();
+ #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER)
+ rgblight_timer_disable();
+ #endif
} else if (rgblight_config.mode >=2 && rgblight_config.mode <=23) {
// MODE 2-5, breathing
// MODE 6-8, rainbow mood
// MODE 9-14, rainbow swirl
// MODE 15-20, snake
// MODE 21-23, knight
- rgblight_timer_enable();
+
+ #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER)
+ rgblight_timer_enable();
+ #endif
}
rgblight_sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
}
void rgblight_toggle(void) {
rgblight_config.enable ^= 1;
eeconfig_update_rgblight(rgblight_config.raw);
- dprintf("rgblight toggle: rgblight_config.enable = %u\n", rgblight_config.enable);
+ xprintf("rgblight toggle: rgblight_config.enable = %u\n", rgblight_config.enable);
if (rgblight_config.enable) {
rgblight_mode(rgblight_config.mode);
} else {
- rgblight_timer_disable();
+
+ #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER)
+ rgblight_timer_disable();
+ #endif
_delay_ms(50);
rgblight_set();
}
rgblight_config.sat = sat;
rgblight_config.val = val;
eeconfig_update_rgblight(rgblight_config.raw);
- dprintf("rgblight set hsv [EEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
+ xprintf("rgblight set hsv [EEPROM]: %u,%u,%u\n", rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
}
}
}
}
+
+#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER)
+
// Animation timer -- AVR Timer3
void rgblight_timer_init(void) {
static uint8_t rgblight_timer_is_init = 0;
}
}
+
+#endif
\ No newline at end of file