Keymap: Add fauxclicky support to my keymap (#3625)

[qmk_firmware.git] / quantum / quantum.c

diff --git a/quantum/quantum.c b/quantum/quantum.c
index cfa3df74183dd63141c444ab24b40c6110aaefd9..ab47fa48ff486cca6a5fc834d20bd4f4c04ad3e7 100644 (file)
--- a/quantum/quantum.c
+++ b/quantum/quantum.c
@@ -147,8 +147,10 @@ void reset_keyboard(void) {
 #if defined(MIDI_ENABLE) && defined(MIDI_BASIC)
   process_midi_all_notes_off();
 #endif
-#if defined(AUDIO_ENABLE) && !defined(NO_MUSIC_MODE)
-  music_all_notes_off();
+#ifdef AUDIO_ENABLE
+  #ifndef NO_MUSIC_MODE
+    music_all_notes_off();
+  #endif
   uint16_t timer_start = timer_read();
   PLAY_SONG(goodbye_song);
   shutdown_user();
@@ -156,6 +158,7 @@ void reset_keyboard(void) {
     wait_ms(1);
   stop_all_notes();
 #else
+  shutdown_user();
   wait_ms(250);
 #endif
 // this is also done later in bootloader.c - not sure if it's neccesary here
@@ -312,8 +315,16 @@ bool process_record_quantum(keyrecord_t *record) {
   #endif
   #if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
   case RGB_TOG:
+    // Split keyboards need to trigger on key-up for edge-case issue
+    #ifndef SPLIT_KEYBOARD
     if (record->event.pressed) {
+    #else
+    if (!record->event.pressed) {
+    #endif
       rgblight_toggle();
+      #ifdef SPLIT_KEYBOARD
+          RGB_DIRTY = true;
+      #endif
     }
     return false;
   case RGB_MODE_FORWARD:
@@ -325,6 +336,9 @@ bool process_record_quantum(keyrecord_t *record) {
       else {
         rgblight_step();
       }
+      #ifdef SPLIT_KEYBOARD
+          RGB_DIRTY = true;
+      #endif
     }
     return false;
   case RGB_MODE_REVERSE:
@@ -336,36 +350,87 @@ bool process_record_quantum(keyrecord_t *record) {
       else {
         rgblight_step_reverse();
       }
+      #ifdef SPLIT_KEYBOARD
+          RGB_DIRTY = true;
+      #endif
     }
     return false;
   case RGB_HUI:
+    // Split keyboards need to trigger on key-up for edge-case issue
+    #ifndef SPLIT_KEYBOARD
     if (record->event.pressed) {
+    #else
+    if (!record->event.pressed) {
+    #endif
       rgblight_increase_hue();
+      #ifdef SPLIT_KEYBOARD
+          RGB_DIRTY = true;
+      #endif
     }
     return false;
   case RGB_HUD:
+    // Split keyboards need to trigger on key-up for edge-case issue
+    #ifndef SPLIT_KEYBOARD
     if (record->event.pressed) {
+    #else
+    if (!record->event.pressed) {
+    #endif
       rgblight_decrease_hue();
+      #ifdef SPLIT_KEYBOARD
+          RGB_DIRTY = true;
+      #endif
     }
     return false;
   case RGB_SAI:
+    // Split keyboards need to trigger on key-up for edge-case issue
+    #ifndef SPLIT_KEYBOARD
     if (record->event.pressed) {
+    #else
+    if (!record->event.pressed) {
+    #endif
       rgblight_increase_sat();
+      #ifdef SPLIT_KEYBOARD
+          RGB_DIRTY = true;
+      #endif
     }
     return false;
   case RGB_SAD:
+    // Split keyboards need to trigger on key-up for edge-case issue
+    #ifndef SPLIT_KEYBOARD
     if (record->event.pressed) {
+    #else
+    if (!record->event.pressed) {
+    #endif
       rgblight_decrease_sat();
+      #ifdef SPLIT_KEYBOARD
+          RGB_DIRTY = true;
+      #endif
     }
     return false;
   case RGB_VAI:
+    // Split keyboards need to trigger on key-up for edge-case issue
+    #ifndef SPLIT_KEYBOARD
     if (record->event.pressed) {
+    #else
+    if (!record->event.pressed) {
+    #endif
       rgblight_increase_val();
+      #ifdef SPLIT_KEYBOARD
+          RGB_DIRTY = true;
+      #endif
     }
     return false;
   case RGB_VAD:
+    // Split keyboards need to trigger on key-up for edge-case issue
+    #ifndef SPLIT_KEYBOARD
     if (record->event.pressed) {
+    #else
+    if (!record->event.pressed) {
+    #endif
       rgblight_decrease_val();
+      #ifdef SPLIT_KEYBOARD
+          RGB_DIRTY = true;
+      #endif
     }
     return false;
   case RGB_SPI:
@@ -381,6 +446,9 @@ bool process_record_quantum(keyrecord_t *record) {
   case RGB_MODE_PLAIN:
     if (record->event.pressed) {
       rgblight_mode(1);
+      #ifdef SPLIT_KEYBOARD
+          RGB_DIRTY = true;
+      #endif
     }
     return false;
   case RGB_MODE_BREATHE:
@@ -854,7 +922,7 @@ void matrix_init_quantum() {
     audio_init();
   #endif
   #ifdef RGB_MATRIX_ENABLE
-    rgb_matrix_init_drivers();
+    rgb_matrix_init();
   #endif
   matrix_init_kb();
 }
@@ -866,7 +934,7 @@ uint8_t rgb_matrix_task_counter = 0;
 #endif
 
 void matrix_scan_quantum() {
-  #if defined(AUDIO_ENABLE)
+  #if defined(AUDIO_ENABLE) && !defined(NO_MUSIC_MODE)
     matrix_scan_music();
   #endif
 
@@ -898,14 +966,29 @@ static const uint8_t backlight_pin = BACKLIGHT_PIN;
 
 // depending on the pin, we use a different output compare unit
 #if BACKLIGHT_PIN == B7
-#  define COM1x1 COM1C1
-#  define OCR1x  OCR1C
+#  define TCCRxA TCCR1A
+#  define TCCRxB TCCR1B
+#  define COMxx1 COM1C1
+#  define OCRxx  OCR1C
+#  define ICRx   ICR1
 #elif BACKLIGHT_PIN == B6
-#  define COM1x1 COM1B1
-#  define OCR1x  OCR1B
+#  define TCCRxA TCCR1A
+#  define TCCRxB TCCR1B
+#  define COMxx1 COM1B1
+#  define OCRxx  OCR1B
+#  define ICRx   ICR1
 #elif BACKLIGHT_PIN == B5
-#  define COM1x1 COM1A1
-#  define OCR1x  OCR1A
+#  define TCCRxA TCCR1A
+#  define TCCRxB TCCR1B
+#  define COMxx1 COM1A1
+#  define OCRxx  OCR1A
+#  define ICRx   ICR1
+#elif BACKLIGHT_PIN == C6
+#  define TCCRxA TCCR3A
+#  define TCCRxB TCCR3B
+#  define COMxx1 COM1A1
+#  define OCRxx  OCR3A
+#  define ICRx   ICR3
 #else
 #  define NO_HARDWARE_PWM
 #endif
@@ -987,7 +1070,7 @@ static uint16_t cie_lightness(uint16_t v) {
 
 // range for val is [0..TIMER_TOP]. PWM pin is high while the timer count is below val.
 static inline void set_pwm(uint16_t val) {
-  OCR1x = val;
+       OCRxx = val;
 }
 
 #ifndef BACKLIGHT_CUSTOM_DRIVER
@@ -998,10 +1081,10 @@ void backlight_set(uint8_t level) {
 
   if (level == 0) {
     // Turn off PWM control on backlight pin
-    TCCR1A &= ~(_BV(COM1x1));
+    TCCRxA &= ~(_BV(COMxx1));
   } else {
     // Turn on PWM control of backlight pin
-    TCCR1A |= _BV(COM1x1);
+    TCCRxA |= _BV(COMxx1);
   }
   // Set the brightness
   set_pwm(cie_lightness(TIMER_TOP * (uint32_t)level / BACKLIGHT_LEVELS));
@@ -1149,11 +1232,10 @@ void backlight_init_ports(void)
   "In fast PWM mode, the compare units allow generation of PWM waveforms on the OCnx pins. Setting the COMnx1:0 bits to two will produce a non-inverted PWM [..]."
   "In fast PWM mode the counter is incremented until the counter value matches either one of the fixed values 0x00FF, 0x01FF, or 0x03FF (WGMn3:0 = 5, 6, or 7), the value in ICRn (WGMn3:0 = 14), or the value in OCRnA (WGMn3:0 = 15)."
   */
-
-  TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010;
-  TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+  TCCRxA = _BV(COMxx1) | _BV(WGM11); // = 0b00001010;
+  TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
   // Use full 16-bit resolution. Counter counts to ICR1 before reset to 0.
-  ICR1 = TIMER_TOP;
+  ICRx = TIMER_TOP;
 
   backlight_init();
   #ifdef BACKLIGHT_BREATHING
@@ -1173,6 +1255,10 @@ void backlight_set(uint8_t level) {}
 
 #endif // backlight
 
+#ifdef HD44780_ENABLED
+#include "hd44780.h"
+#endif
+
 
 // Functions for spitting out values
 //