#include "quantum.h"
+#ifdef PROTOCOL_LUFA
+#include "outputselect.h"
+#endif
#ifndef TAPPING_TERM
#define TAPPING_TERM 200
#endif
+#include "backlight.h"
+extern backlight_config_t backlight_config;
+
+#ifdef FAUXCLICKY_ENABLE
+#include "fauxclicky.h"
+#endif
+
static void do_code16 (uint16_t code, void (*f) (uint8_t)) {
switch (code) {
case QK_MODS ... QK_MODS_MAX:
if (code & QK_LGUI)
f(KC_LGUI);
+ if (code < QK_RMODS_MIN) return;
+
if (code & QK_RCTL)
f(KC_RCTL);
if (code & QK_RSFT)
f(KC_RGUI);
}
+static inline void qk_register_weak_mods(uint8_t kc) {
+ add_weak_mods(MOD_BIT(kc));
+ send_keyboard_report();
+}
+
+static inline void qk_unregister_weak_mods(uint8_t kc) {
+ del_weak_mods(MOD_BIT(kc));
+ send_keyboard_report();
+}
+
+static inline void qk_register_mods(uint8_t kc) {
+ add_weak_mods(MOD_BIT(kc));
+ send_keyboard_report();
+}
+
+static inline void qk_unregister_mods(uint8_t kc) {
+ del_weak_mods(MOD_BIT(kc));
+ send_keyboard_report();
+}
+
void register_code16 (uint16_t code) {
- do_code16 (code, register_code);
+ if (IS_MOD(code) || code == KC_NO) {
+ do_code16 (code, qk_register_mods);
+ } else {
+ do_code16 (code, qk_register_weak_mods);
+ }
register_code (code);
}
void unregister_code16 (uint16_t code) {
unregister_code (code);
- do_code16 (code, unregister_code);
+ if (IS_MOD(code) || code == KC_NO) {
+ do_code16 (code, qk_unregister_mods);
+ } else {
+ do_code16 (code, qk_unregister_weak_mods);
+ }
}
__attribute__ ((weak))
#ifndef DISABLE_CHORDING
process_chording(keycode, record) &&
#endif
+ #ifdef COMBO_ENABLE
+ process_combo(keycode, record) &&
+ #endif
#ifdef UNICODE_ENABLE
process_unicode(keycode, record) &&
#endif
}
return false;
break;
+ #ifdef FAUXCLICKY_ENABLE
+ case FC_TOG:
+ if (record->event.pressed) {
+ FAUXCLICKY_TOGGLE;
+ }
+ return false;
+ break;
+ case FC_ON:
+ if (record->event.pressed) {
+ FAUXCLICKY_ON;
+ }
+ return false;
+ break;
+ case FC_OFF:
+ if (record->event.pressed) {
+ FAUXCLICKY_OFF;
+ }
+ return false;
+ break;
+ #endif
#ifdef RGBLIGHT_ENABLE
case RGB_TOG:
if (record->event.pressed) {
return false;
break;
#endif
+ #ifdef PROTOCOL_LUFA
+ case OUT_AUTO:
+ if (record->event.pressed) {
+ set_output(OUTPUT_AUTO);
+ }
+ return false;
+ break;
+ case OUT_USB:
+ if (record->event.pressed) {
+ set_output(OUTPUT_USB);
+ }
+ return false;
+ break;
+ #ifdef BLUETOOTH_ENABLE
+ case OUT_BT:
+ if (record->event.pressed) {
+ set_output(OUTPUT_BLUETOOTH);
+ }
+ return false;
+ break;
+ #endif
+ #ifdef ADAFRUIT_BLE_ENABLE
+ case OUT_BLE:
+ if (record->event.pressed) {
+ set_output(OUTPUT_ADAFRUIT_BLE);
+ }
+ return false;
+ break;
+ #endif
+ #endif
case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_TOGGLE_NKRO:
if (record->event.pressed) {
// MAGIC actions (BOOTMAGIC without the boot)
#ifdef TAP_DANCE_ENABLE
matrix_scan_tap_dance();
#endif
+
+ #ifdef COMBO_ENABLE
+ matrix_scan_combo();
+ #endif
+
+ #if defined(BACKLIGHT_ENABLE) && defined(BACKLIGHT_PIN)
+ backlight_task();
+ #endif
+
matrix_scan_kb();
}
# define COM1x1 COM1A1
# define OCR1x OCR1A
#else
-# error "Backlight pin not supported - use B5, B6, or B7"
+# define NO_BACKLIGHT_CLOCK
+#endif
+
+#ifndef BACKLIGHT_ON_STATE
+#define BACKLIGHT_ON_STATE 0
#endif
__attribute__ ((weak))
void backlight_init_ports(void)
{
- // Setup backlight pin as output and output low.
+ // Setup backlight pin as output and output to on state.
// DDRx |= n
_SFR_IO8((backlight_pin >> 4) + 1) |= _BV(backlight_pin & 0xF);
- // PORTx &= ~n
- _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
+ #if BACKLIGHT_ON_STATE == 0
+ // PORTx &= ~n
+ _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
+ #else
+ // PORTx |= n
+ _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF);
+ #endif
- // Use full 16-bit resolution.
- ICR1 = 0xFFFF;
+ #ifndef NO_BACKLIGHT_CLOCK
+ // Use full 16-bit resolution.
+ ICR1 = 0xFFFF;
- // I could write a wall of text here to explain... but TL;DW
- // Go read the ATmega32u4 datasheet.
- // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
+ // I could write a wall of text here to explain... but TL;DW
+ // Go read the ATmega32u4 datasheet.
+ // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
- // Pin PB7 = OCR1C (Timer 1, Channel C)
- // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
- // (i.e. start high, go low when counter matches.)
- // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
- // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
+ // Pin PB7 = OCR1C (Timer 1, Channel C)
+ // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
+ // (i.e. start high, go low when counter matches.)
+ // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
+ // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
- TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010;
- TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+ TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010;
+ TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+ #endif
backlight_init();
#ifdef BACKLIGHT_BREATHING
void backlight_set(uint8_t level)
{
// Prevent backlight blink on lowest level
- // PORTx &= ~n
- _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
+ // #if BACKLIGHT_ON_STATE == 0
+ // // PORTx &= ~n
+ // _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
+ // #else
+ // // PORTx |= n
+ // _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF);
+ // #endif
if ( level == 0 ) {
- // Turn off PWM control on backlight pin, revert to output low.
- TCCR1A &= ~(_BV(COM1x1));
- OCR1x = 0x0;
- } else if ( level == BACKLIGHT_LEVELS ) {
- // Turn on PWM control of backlight pin
- TCCR1A |= _BV(COM1x1);
- // Set the brightness
- OCR1x = 0xFFFF;
- } else {
- // Turn on PWM control of backlight pin
- TCCR1A |= _BV(COM1x1);
- // Set the brightness
- OCR1x = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
- }
+ #ifndef NO_BACKLIGHT_CLOCK
+ // Turn off PWM control on backlight pin, revert to output low.
+ TCCR1A &= ~(_BV(COM1x1));
+ OCR1x = 0x0;
+ #else
+ // #if BACKLIGHT_ON_STATE == 0
+ // // PORTx |= n
+ // _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF);
+ // #else
+ // // PORTx &= ~n
+ // _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
+ // #endif
+ #endif
+ }
+ #ifndef NO_BACKLIGHT_CLOCK
+ else if ( level == BACKLIGHT_LEVELS ) {
+ // Turn on PWM control of backlight pin
+ TCCR1A |= _BV(COM1x1);
+ // Set the brightness
+ OCR1x = 0xFFFF;
+ }
+ else {
+ // Turn on PWM control of backlight pin
+ TCCR1A |= _BV(COM1x1);
+ // Set the brightness
+ OCR1x = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
+ }
+ #endif
#ifdef BACKLIGHT_BREATHING
breathing_intensity_default();
#endif
}
+uint8_t backlight_tick = 0;
+
+void backlight_task(void) {
+ #ifdef NO_BACKLIGHT_CLOCK
+ if ((0xFFFF >> ((BACKLIGHT_LEVELS - backlight_config.level) * ((BACKLIGHT_LEVELS + 1) / 2))) & (1 << backlight_tick)) {
+ #if BACKLIGHT_ON_STATE == 0
+ // PORTx &= ~n
+ _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
+ #else
+ // PORTx |= n
+ _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF);
+ #endif
+ } else {
+ #if BACKLIGHT_ON_STATE == 0
+ // PORTx |= n
+ _SFR_IO8((backlight_pin >> 4) + 2) |= _BV(backlight_pin & 0xF);
+ #else
+ // PORTx &= ~n
+ _SFR_IO8((backlight_pin >> 4) + 2) &= ~_BV(backlight_pin & 0xF);
+ #endif
+ }
+ backlight_tick = (backlight_tick + 1) % 16;
+ #endif
+}
#ifdef BACKLIGHT_BREATHING
}
}
+
+__attribute__((weak))
+uint16_t hex_to_keycode(uint8_t hex)
+{
+ if (hex == 0x0) {
+ return KC_0;
+ } else if (hex < 0xA) {
+ return KC_1 + (hex - 0x1);
+ } else {
+ return KC_A + (hex - 0xA);
+ }
+}
+
void api_send_unicode(uint32_t unicode) {
#ifdef API_ENABLE
uint8_t chunk[4];
projects / qmk_firmware.git / blobdiff