#include <stdint.h>
#include <stdbool.h>
#include "quantum.h"
-#include "led_matrix.h"
+#include "ledmatrix.h"
#include "progmem.h"
#include "config.h"
#include "eeprom.h"
uint32_t g_tick = 0;
// Ticks since this key was last hit.
-uint8_t g_key_hit[DRIVER_LED_TOTAL];
+uint8_t g_key_hit[LED_DRIVER_LED_COUNT];
// Ticks since any key was last hit.
uint32_t g_any_key_hit = 0;
uint32_t eeconfig_read_led_matrix(void) {
return eeprom_read_dword(EECONFIG_LED_MATRIX);
}
+
void eeconfig_update_led_matrix(uint32_t config_value) {
eeprom_update_dword(EECONFIG_LED_MATRIX, config_value);
}
+
void eeconfig_update_led_matrix_default(void) {
dprintf("eeconfig_update_led_matrix_default\n");
led_matrix_config.enable = 1;
led_matrix_config.speed = 0;
eeconfig_update_led_matrix(led_matrix_config.raw);
}
+
void eeconfig_debug_led_matrix(void) {
- dprintf("led_matrix_config eprom\n");
+ dprintf("led_matrix_config eeprom\n");
dprintf("led_matrix_config.enable = %d\n", led_matrix_config.enable);
dprintf("led_matrix_config.mode = %d\n", led_matrix_config.mode);
dprintf("led_matrix_config.val = %d\n", led_matrix_config.val);
}
// Last led hit
-#define LED_HITS_TO_REMEMBER 8
+#ifndef LED_HITS_TO_REMEMBER
+ #define LED_HITS_TO_REMEMBER 8
+#endif
uint8_t g_last_led_hit[LED_HITS_TO_REMEMBER] = {255};
uint8_t g_last_led_count = 0;
led_matrix led;
*led_count = 0;
- for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
+ for (uint8_t i = 0; i < LED_DRIVER_LED_COUNT; i++) {
// map_index_to_led(i, &led);
led = g_leds[i];
if (row == led.matrix_co.row && column == led.matrix_co.col) {
// Uniform brightness
void led_matrix_uniform_brightness(void) {
- led_matrix_set_index_value_all(led_matrix_config.val);
+ led_matrix_set_index_value_all(LED_MATRIX_MAXIMUM_BRIGHTNESS / BACKLIGHT_LEVELS * led_matrix_config.val);
}
void led_matrix_custom(void) {}
void led_matrix_task(void) {
- #ifdef TRACK_PREVIOUS_EFFECT
- static uint8_t toggle_enable_last = 255;
- #endif
- if (!led_matrix_config.enable) {
- led_matrix_all_off();
- led_matrix_indicators();
- #ifdef TRACK_PREVIOUS_EFFECT
- toggle_enable_last = led_matrix_config.enable;
- #endif
- return;
- }
-
- // delay 1 second before driving LEDs or doing anything else
- // FIXME: Can't we use wait_ms() here?
- static uint8_t startup_tick = 0;
- if (startup_tick < 20) {
- startup_tick++;
+ if (!led_matrix_config.enable) {
+ led_matrix_all_off();
+ led_matrix_indicators();
return;
}
g_any_key_hit++;
}
- for (int led = 0; led < DRIVER_LED_TOTAL; led++) {
+ for (int led = 0; led < LED_DRIVER_LED_COUNT; led++) {
if (g_key_hit[led] < 255) {
if (g_key_hit[led] == 254)
g_last_led_count = MAX(g_last_led_count - 1, 0);
}
}
- // Factory default magic value
- if (led_matrix_config.mode == 255) {
- led_matrix_uniform_brightness();
- return;
- }
-
// Ideally we would also stop sending zeros to the LED driver PWM buffers
// while suspended and just do a software shutdown. This is a cheap hack for now.
bool suspend_backlight = ((g_suspend_state && LED_DISABLE_WHEN_USB_SUSPENDED) ||
(LED_DISABLE_AFTER_TIMEOUT > 0 && g_any_key_hit > LED_DISABLE_AFTER_TIMEOUT * 60 * 20));
uint8_t effect = suspend_backlight ? 0 : led_matrix_config.mode;
- #ifdef TRACK_PREVIOUS_EFFECT
- // Keep track of the effect used last time,
- // detect change in effect, so each effect can
- // have an optional initialization.
-
- static uint8_t effect_last = 255;
- bool initialize = (effect != effect_last) || (led_matrix_config.enable != toggle_enable_last);
- effect_last = effect;
- toggle_enable_last = led_matrix_config.enable;
- #endif
-
// this gets ticked at 20 Hz.
// each effect can opt to do calculations
// and/or request PWM buffer updates.
break;
}
- if (! suspend_backlight) {
+ if (!suspend_backlight) {
led_matrix_indicators();
}
+ // Tell the LED driver to update its state
+ led_matrix_driver.flush();
}
void led_matrix_indicators(void) {
// }
void led_matrix_init(void) {
- led_matrix_driver.init();
+ led_matrix_driver.init();
- // TODO: put the 1 second startup delay here?
+ // Wait half a second for the driver to finish initializing
+ wait_ms(500);
- // clear the key hits
- for (int led=0; led<DRIVER_LED_TOTAL; led++) {
- g_key_hit[led] = 255;
- }
+ // clear the key hits
+ for (int led=0; led<LED_DRIVER_LED_COUNT; led++) {
+ g_key_hit[led] = 255;
+ }
+ if (!eeconfig_is_enabled()) {
+ dprintf("led_matrix_init_drivers eeconfig is not enabled.\n");
+ eeconfig_init();
+ eeconfig_update_led_matrix_default();
+ }
+
+ led_matrix_config.raw = eeconfig_read_led_matrix();
+
+ if (!led_matrix_config.mode) {
+ dprintf("led_matrix_init_drivers led_matrix_config.mode = 0. Write default values to EEPROM.\n");
+ eeconfig_update_led_matrix_default();
+ led_matrix_config.raw = eeconfig_read_led_matrix();
+ }
- if (!eeconfig_is_enabled()) {
- dprintf("led_matrix_init_drivers eeconfig is not enabled.\n");
- eeconfig_init();
- eeconfig_update_led_matrix_default();
- }
- led_matrix_config.raw = eeconfig_read_led_matrix();
- if (!led_matrix_config.mode) {
- dprintf("led_matrix_init_drivers led_matrix_config.mode = 0. Write default values to EEPROM.\n");
- eeconfig_update_led_matrix_default();
- led_matrix_config.raw = eeconfig_read_led_matrix();
- }
- eeconfig_debug_led_matrix(); // display current eeprom values
+ eeconfig_debug_led_matrix(); // display current eeprom values
}
// Deals with the messy details of incrementing an integer
static uint8_t increment(uint8_t value, uint8_t step, uint8_t min, uint8_t max) {
int16_t new_value = value;
new_value += step;
- return MIN(MAX( new_value, min), max );
+ return MIN(MAX(new_value, min), max);
}
static uint8_t decrement(uint8_t value, uint8_t step, uint8_t min, uint8_t max) {
int16_t new_value = value;
new_value -= step;
- return MIN(MAX( new_value, min), max );
+ return MIN(MAX(new_value, min), max);
}
// void *backlight_get_custom_key_value_eeprom_address(uint8_t led) {
// uint8_t led[8], led_count;
// map_row_column_to_led(row,column,led,&led_count);
// for(uint8_t i = 0; i < led_count; i++) {
-// if (led[i] < DRIVER_LED_TOTAL) {
+// if (led[i] < LED_DRIVER_LED_COUNT) {
// void *address = backlight_get_custom_key_value_eeprom_address(led[i]);
// eeprom_update_byte(address, value);
// }
}
void led_matrix_toggle(void) {
- led_matrix_config.enable ^= 1;
+ led_matrix_config.enable ^= 1;
eeconfig_update_led_matrix(led_matrix_config.raw);
}
void led_matrix_enable(void) {
- led_matrix_config.enable = 1;
+ led_matrix_config.enable = 1;
eeconfig_update_led_matrix(led_matrix_config.raw);
}
void led_matrix_enable_noeeprom(void) {
- led_matrix_config.enable = 1;
+ led_matrix_config.enable = 1;
}
void led_matrix_disable(void) {
- led_matrix_config.enable = 0;
+ led_matrix_config.enable = 0;
eeconfig_update_led_matrix(led_matrix_config.raw);
}
void led_matrix_disable_noeeprom(void) {
- led_matrix_config.enable = 0;
+ led_matrix_config.enable = 0;
}
void led_matrix_step(void) {
led_matrix_config.mode++;
- if (led_matrix_config.mode >= LED_MATRIX_EFFECT_MAX)
+ if (led_matrix_config.mode >= LED_MATRIX_EFFECT_MAX) {
led_matrix_config.mode = 1;
+ }
eeconfig_update_led_matrix(led_matrix_config.raw);
}
void led_matrix_step_reverse(void) {
led_matrix_config.mode--;
- if (led_matrix_config.mode < 1)
+ if (led_matrix_config.mode < 1) {
led_matrix_config.mode = LED_MATRIX_EFFECT_MAX - 1;
+ }
eeconfig_update_led_matrix(led_matrix_config.raw);
}
return led_matrix_config.mode;
}
-void led_matrix_set_value(uint8_t val, bool eeprom_write) {
+void led_matrix_set_value_noeeprom(uint8_t val) {
led_matrix_config.val = val;
- if (eeprom_write) {
- eeconfig_update_led_matrix(led_matrix_config.raw);
- }
+}
+
+void led_matrix_set_value(uint8_t val) {
+ led_matrix_set_value_noeeprom(val);
+ eeconfig_update_led_matrix(led_matrix_config.raw);
+}
+
+void backlight_set(uint8_t val) {
+ led_matrix_set_value(val);
}
projects / qmk_firmware.git / blobdiff