-#ifndef CONFIG_DEFINITIONS_H
-#define CONFIG_DEFINITIONS_H
+/* Copyright 2015-2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
-#define B0 0x20
-#define B1 0x21
-#define B2 0x22
-#define B3 0x23
-#define B4 0x24
-#define B5 0x25
-#define B6 0x26
-#define B7 0x27
-#define C0 0x30
-#define C1 0x31
-#define C2 0x32
-#define C3 0x33
-#define C4 0x34
-#define C5 0x35
-#define C6 0x36
-#define C7 0x37
-#define D0 0x40
-#define D1 0x41
-#define D2 0x42
-#define D3 0x43
-#define D4 0x44
-#define D5 0x45
-#define D6 0x46
-#define D7 0x47
-#define E0 0x50
-#define E1 0x51
-#define E2 0x52
-#define E3 0x53
-#define E4 0x54
-#define E5 0x55
-#define E6 0x56
-#define E7 0x57
-#define F0 0x60
-#define F1 0x61
-#define F2 0x62
-#define F3 0x63
-#define F4 0x64
-#define F5 0x65
-#define F6 0x66
-#define F7 0x67
+#pragma once
-#define COL2ROW 0x0
-#define ROW2COL 0x1
+/* diode directions */
+#define COL2ROW 0
+#define ROW2COL 1
+#define CUSTOM_MATRIX 2 /* Disables built-in matrix scanning code */
-#ifdef BLUETOOTH_ENABLE
-#ifdef __AVR_ATmega32U4__
- #define SERIAL_UART_BAUD 9600
- #define SERIAL_UART_DATA UDR1
- #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
- #define SERIAL_UART_RXD_VECT USART1_RX_vect
- #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
- #define SERIAL_UART_INIT() do { \
- UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
- UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
- UCSR1B = (1<<TXEN1); /* TX: enable */ \
- UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
- (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \
- sei(); \
- } while(0)
-#else
-# error "USART configuration is needed."
-#endif
+// useful for direct pin mapping
+#define NO_PIN (~0)
+#ifdef __AVR__
+ #ifndef __ASSEMBLER__
+ #include <avr/io.h>
+ #endif
+ #define PORT_SHIFTER 4 // this may be 4 for all AVR chips
-// I'm fairly sure these aren't needed, but oh well - Jack
+ // If you want to add more to this list, reference the PINx definitions in these header
+ // files: https://github.com/vancegroup-mirrors/avr-libc/tree/master/avr-libc/include/avr
-/*
- * PS/2 Interrupt configuration
- */
-#ifdef PS2_USE_INT
-/* uses INT1 for clock line(ATMega32U4) */
-#define PS2_CLOCK_PORT PORTD
-#define PS2_CLOCK_PIN PIND
-#define PS2_CLOCK_DDR DDRD
-#define PS2_CLOCK_BIT 1
+ #if defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__)
+ #define ADDRESS_BASE 0x00
+ #define PINB_ADDRESS 0x3
+ #define PINC_ADDRESS 0x6
+ #define PIND_ADDRESS 0x9
+ #define PINE_ADDRESS 0xC
+ #define PINF_ADDRESS 0xF
+ #elif defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__)
+ #define ADDRESS_BASE 0x00
+ #define PINB_ADDRESS 0x3
+ #define PINC_ADDRESS 0x6
+ #define PIND_ADDRESS 0x9
+ #elif defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__)
+ #define ADDRESS_BASE 0x00
+ #define PINA_ADDRESS 0x0
+ #define PINB_ADDRESS 0x3
+ #define PINC_ADDRESS 0x6
+ #define PIND_ADDRESS 0x9
+ #define PINE_ADDRESS 0xC
+ #define PINF_ADDRESS 0xF
+ #elif defined(__AVR_ATmega32A__)
+ #define ADDRESS_BASE 0x10
+ #define PIND_ADDRESS 0x0
+ #define PINC_ADDRESS 0x3
+ #define PINB_ADDRESS 0x6
+ #define PINA_ADDRESS 0x9
+ #elif defined(__AVR_ATmega328P__)
+ #define ADDRESS_BASE 0x00
+ #define PINB_ADDRESS 0x3
+ #define PINC_ADDRESS 0x6
+ #define PIND_ADDRESS 0x9
+ #else
+ #error "Pins are not defined"
+ #endif
-#define PS2_DATA_PORT PORTD
-#define PS2_DATA_PIN PIND
-#define PS2_DATA_DDR DDRD
-#define PS2_DATA_BIT 0
+ /* I/O pins */
+ #define PINDEF(port, pin) ((PIN##port##_ADDRESS << PORT_SHIFTER) | pin)
-#define PS2_INT_INIT() do { \
- EICRA |= ((1<<ISC11) | \
- (0<<ISC10)); \
-} while (0)
-#define PS2_INT_ON() do { \
- EIMSK |= (1<<INT1); \
-} while (0)
-#define PS2_INT_OFF() do { \
- EIMSK &= ~(1<<INT1); \
-} while (0)
-#define PS2_INT_VECT INT1_vect
-#endif
+ #ifdef PORTA
+ #define A0 PINDEF(A, 0)
+ #define A1 PINDEF(A, 1)
+ #define A2 PINDEF(A, 2)
+ #define A3 PINDEF(A, 3)
+ #define A4 PINDEF(A, 4)
+ #define A5 PINDEF(A, 5)
+ #define A6 PINDEF(A, 6)
+ #define A7 PINDEF(A, 7)
+ #endif
+ #ifdef PORTB
+ #define B0 PINDEF(B, 0)
+ #define B1 PINDEF(B, 1)
+ #define B2 PINDEF(B, 2)
+ #define B3 PINDEF(B, 3)
+ #define B4 PINDEF(B, 4)
+ #define B5 PINDEF(B, 5)
+ #define B6 PINDEF(B, 6)
+ #define B7 PINDEF(B, 7)
+ #endif
+ #ifdef PORTC
+ #define C0 PINDEF(C, 0)
+ #define C1 PINDEF(C, 1)
+ #define C2 PINDEF(C, 2)
+ #define C3 PINDEF(C, 3)
+ #define C4 PINDEF(C, 4)
+ #define C5 PINDEF(C, 5)
+ #define C6 PINDEF(C, 6)
+ #define C7 PINDEF(C, 7)
+ #endif
+ #ifdef PORTD
+ #define D0 PINDEF(D, 0)
+ #define D1 PINDEF(D, 1)
+ #define D2 PINDEF(D, 2)
+ #define D3 PINDEF(D, 3)
+ #define D4 PINDEF(D, 4)
+ #define D5 PINDEF(D, 5)
+ #define D6 PINDEF(D, 6)
+ #define D7 PINDEF(D, 7)
+ #endif
+ #ifdef PORTE
+ #define E0 PINDEF(E, 0)
+ #define E1 PINDEF(E, 1)
+ #define E2 PINDEF(E, 2)
+ #define E3 PINDEF(E, 3)
+ #define E4 PINDEF(E, 4)
+ #define E5 PINDEF(E, 5)
+ #define E6 PINDEF(E, 6)
+ #define E7 PINDEF(E, 7)
+ #endif
+ #ifdef PORTF
+ #define F0 PINDEF(F, 0)
+ #define F1 PINDEF(F, 1)
+ #define F2 PINDEF(F, 2)
+ #define F3 PINDEF(F, 3)
+ #define F4 PINDEF(F, 4)
+ #define F5 PINDEF(F, 5)
+ #define F6 PINDEF(F, 6)
+ #define F7 PINDEF(F, 7)
+ #endif
-/*
- * PS/2 Busywait configuration
- */
-#ifdef PS2_USE_BUSYWAIT
-#define PS2_CLOCK_PORT PORTD
-#define PS2_CLOCK_PIN PIND
-#define PS2_CLOCK_DDR DDRD
-#define PS2_CLOCK_BIT 1
+#elif defined(PROTOCOL_CHIBIOS)
+ // Defines mapping for Proton C replacement
+ #ifdef CONVERT_TO_PROTON_C
+ // Left side (front)
+ #define D3 PAL_LINE(GPIOA, 9)
+ #define D2 PAL_LINE(GPIOA, 10)
+ // GND
+ // GND
+ #define D1 PAL_LINE(GPIOB, 7)
+ #define D0 PAL_LINE(GPIOB, 6)
+ #define D4 PAL_LINE(GPIOB, 5)
+ #define C6 PAL_LINE(GPIOB, 4)
+ #define D7 PAL_LINE(GPIOB, 3)
+ #define E6 PAL_LINE(GPIOB, 2)
+ #define B4 PAL_LINE(GPIOB, 1)
+ #define B5 PAL_LINE(GPIOB, 0)
-#define PS2_DATA_PORT PORTD
-#define PS2_DATA_PIN PIND
-#define PS2_DATA_DDR DDRD
-#define PS2_DATA_BIT 0
-#endif
+ // Right side (front)
+ // RAW
+ // GND
+ // RESET
+ // VCC
+ #define F4 PAL_LINE(GPIOA, 2)
+ #define F5 PAL_LINE(GPIOA, 1)
+ #define F6 PAL_LINE(GPIOA, 0)
+ #define F7 PAL_LINE(GPIOB, 8)
+ #define B1 PAL_LINE(GPIOB, 13)
+ #define B3 PAL_LINE(GPIOB, 14)
+ #define B2 PAL_LINE(GPIOB, 15)
+ #define B6 PAL_LINE(GPIOB, 9)
+ // LEDs (only D5/C13 uses an actual LED)
+ #ifdef CONVERT_TO_PROTON_C_RXLED
+ #define D5 PAL_LINE(GPIOC, 13)
+ #define B0 PAL_LINE(GPIOC, 13)
+ #else
+ #define D5 PAL_LINE(GPIOC, 13)
+ #define B0 PAL_LINE(GPIOC, 14)
+ #endif
+ #else
+ #define A0 PAL_LINE(GPIOA, 0)
+ #define A1 PAL_LINE(GPIOA, 1)
+ #define A2 PAL_LINE(GPIOA, 2)
+ #define A3 PAL_LINE(GPIOA, 3)
+ #define A4 PAL_LINE(GPIOA, 4)
+ #define A5 PAL_LINE(GPIOA, 5)
+ #define A6 PAL_LINE(GPIOA, 6)
+ #define A7 PAL_LINE(GPIOA, 7)
+ #define A8 PAL_LINE(GPIOA, 8)
+ #define A9 PAL_LINE(GPIOA, 9)
+ #define A10 PAL_LINE(GPIOA, 10)
+ #define A11 PAL_LINE(GPIOA, 11)
+ #define A12 PAL_LINE(GPIOA, 12)
+ #define A13 PAL_LINE(GPIOA, 13)
+ #define A14 PAL_LINE(GPIOA, 14)
+ #define A15 PAL_LINE(GPIOA, 15)
+ #define B0 PAL_LINE(GPIOB, 0)
+ #define B1 PAL_LINE(GPIOB, 1)
+ #define B2 PAL_LINE(GPIOB, 2)
+ #define B3 PAL_LINE(GPIOB, 3)
+ #define B4 PAL_LINE(GPIOB, 4)
+ #define B5 PAL_LINE(GPIOB, 5)
+ #define B6 PAL_LINE(GPIOB, 6)
+ #define B7 PAL_LINE(GPIOB, 7)
+ #define B8 PAL_LINE(GPIOB, 8)
+ #define B9 PAL_LINE(GPIOB, 9)
+ #define B10 PAL_LINE(GPIOB, 10)
+ #define B11 PAL_LINE(GPIOB, 11)
+ #define B12 PAL_LINE(GPIOB, 12)
+ #define B13 PAL_LINE(GPIOB, 13)
+ #define B14 PAL_LINE(GPIOB, 14)
+ #define B15 PAL_LINE(GPIOB, 15)
+ #define B16 PAL_LINE(GPIOB, 16)
+ #define B17 PAL_LINE(GPIOB, 17)
+ #define C0 PAL_LINE(GPIOC, 0)
+ #define C1 PAL_LINE(GPIOC, 1)
+ #define C2 PAL_LINE(GPIOC, 2)
+ #define C3 PAL_LINE(GPIOC, 3)
+ #define C4 PAL_LINE(GPIOC, 4)
+ #define C5 PAL_LINE(GPIOC, 5)
+ #define C6 PAL_LINE(GPIOC, 6)
+ #define C7 PAL_LINE(GPIOC, 7)
+ #define C8 PAL_LINE(GPIOC, 8)
+ #define C9 PAL_LINE(GPIOC, 9)
+ #define C10 PAL_LINE(GPIOC, 10)
+ #define C11 PAL_LINE(GPIOC, 11)
+ #define C12 PAL_LINE(GPIOC, 12)
+ #define C13 PAL_LINE(GPIOC, 13)
+ #define C14 PAL_LINE(GPIOC, 14)
+ #define C15 PAL_LINE(GPIOC, 15)
+ #define D0 PAL_LINE(GPIOD, 0)
+ #define D1 PAL_LINE(GPIOD, 1)
+ #define D2 PAL_LINE(GPIOD, 2)
+ #define D3 PAL_LINE(GPIOD, 3)
+ #define D4 PAL_LINE(GPIOD, 4)
+ #define D5 PAL_LINE(GPIOD, 5)
+ #define D6 PAL_LINE(GPIOD, 6)
+ #define D7 PAL_LINE(GPIOD, 7)
+ #define D8 PAL_LINE(GPIOD, 8)
+ #define D9 PAL_LINE(GPIOD, 9)
+ #define D10 PAL_LINE(GPIOD, 10)
+ #define D11 PAL_LINE(GPIOD, 11)
+ #define D12 PAL_LINE(GPIOD, 12)
+ #define D13 PAL_LINE(GPIOD, 13)
+ #define D14 PAL_LINE(GPIOD, 14)
+ #define D15 PAL_LINE(GPIOD, 15)
+ #define E0 PAL_LINE(GPIOE, 0)
+ #define E1 PAL_LINE(GPIOE, 1)
+ #define E2 PAL_LINE(GPIOE, 2)
+ #define E3 PAL_LINE(GPIOE, 3)
+ #define E4 PAL_LINE(GPIOE, 4)
+ #define E5 PAL_LINE(GPIOE, 5)
+ #define E6 PAL_LINE(GPIOE, 6)
+ #define E7 PAL_LINE(GPIOE, 7)
+ #define E8 PAL_LINE(GPIOE, 8)
+ #define E9 PAL_LINE(GPIOE, 9)
+ #define E10 PAL_LINE(GPIOE, 10)
+ #define E11 PAL_LINE(GPIOE, 11)
+ #define E12 PAL_LINE(GPIOE, 12)
+ #define E13 PAL_LINE(GPIOE, 13)
+ #define E14 PAL_LINE(GPIOE, 14)
+ #define E15 PAL_LINE(GPIOE, 15)
+ #define F0 PAL_LINE(GPIOF, 0)
+ #define F1 PAL_LINE(GPIOF, 1)
+ #define F2 PAL_LINE(GPIOF, 2)
+ #define F3 PAL_LINE(GPIOF, 3)
+ #define F4 PAL_LINE(GPIOF, 4)
+ #define F5 PAL_LINE(GPIOF, 5)
+ #define F6 PAL_LINE(GPIOF, 6)
+ #define F7 PAL_LINE(GPIOF, 7)
+ #define F8 PAL_LINE(GPIOF, 8)
+ #define F9 PAL_LINE(GPIOF, 9)
+ #define F10 PAL_LINE(GPIOF, 10)
+ #define F11 PAL_LINE(GPIOF, 11)
+ #define F12 PAL_LINE(GPIOF, 12)
+ #define F13 PAL_LINE(GPIOF, 13)
+ #define F14 PAL_LINE(GPIOF, 14)
+ #define F15 PAL_LINE(GPIOF, 15)
+ #endif
#endif
+/* USART configuration */
+#ifdef BLUETOOTH_ENABLE
+# ifdef __AVR_ATmega32U4__
+# define SERIAL_UART_BAUD 9600
+# define SERIAL_UART_DATA UDR1
+# define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
+# define SERIAL_UART_RXD_VECT USART1_RX_vect
+# define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
+# define SERIAL_UART_INIT() do { \
+ /* baud rate */ \
+ UBRR1L = SERIAL_UART_UBRR; \
+ /* baud rate */ \
+ UBRR1H = SERIAL_UART_UBRR >> 8; \
+ /* enable TX */ \
+ UCSR1B = _BV(TXEN1); \
+ /* 8-bit data */ \
+ UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
+ sei(); \
+ } while(0)
+# else
+# error "USART configuration is needed."
+# endif
#endif
+#define API_SYSEX_MAX_SIZE 32
+
+#include "song_list.h"